summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-09-14brcm47xx: detect Asus RT-N10hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14kernel: b53: use hard coded switch reset gpio on some boards.hauke
The Linksys wrt310n v1 does not have a robo_reset config variable in nvram, but GPIO Pin 8 is the pin needed for resetting the external switch, Linksys hard coded it into their source code. Thank you Devastator for testing. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37988 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14kernel: b53: add soft reset for BCM539x switcheshauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14brcm47xx: tg3: use the phy address from et0phyaddr and not the default phy ↵hauke
address. Thank you Devastator for testing. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37986 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14ath9k: add another minor tx path fixnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37985 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14iwinfo: when using nl80211, parse interface combinations instead of ↵nbd
creating/deleting interfaces Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37983 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14ath9k: merge a fix for tx processing issues with aggregationnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14generic/3.10: remove unused defines from the rootfs split patchjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14generic/3.10: reduce number of ifdefs in the rootfs split codejuhosg
Use the config_enabled() macro where it is possible. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13imx6: add network defaults for GW5400-Aluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37979 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13kernel: add missing config optionhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13brcm47xx: board detection, GPIO for Linksys E1000 V2.1hauke
This patch adds board detection for the Linksys E1000 V2.1 router, as well as GPIO support for same. This fixes bug #14135. Currently, wired networking isn't working on the router, and I haven't tried the wireless, but with this patch, OpenWRT successfully boots, and all the LEDs and buttons work properly. Signed-off-by: Zachary Catlin <zcatlin@indiana.edu> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13ar71xx: refresh patchesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37976 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13generic/3.10: refresh patchesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13generic/3.10: rename mtd patchesjuhosg
- change patch numbers to group the related stuff together, - add mtd prefix where it is missing, - use hyphens in the patch names Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13cns21xx: remove 3.8 supportjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13cns21xx: switch to 3.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13cns21xx: add support for 3.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13brcm47xx: do not use GPIO configuration of WRT54G for every unknown Linksys ↵hauke
device Most of the Linksys devices without an own GPIO configuration where detected as WRT54G. On one board this made OpenWrt to boot into failsafe every time, because one GPIO configurated as button was not a button. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13brcm47xx: detect WRT310NV1hauke
Thanks Devastator for testing git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37969 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13cns21xx: make cns21xx-ehci a separate driverjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37968 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13cns21xx: disable legacy PTY devicesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37967 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13cns21xx: fix broken case statement in led defaults filejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37966 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13cns21xx: enable XZ_DEC_ARM and XZ_DEC_BCJ kernel optionsjuhosg
Squashfs is unable to decompress some blocks without that: [ 0.970000] SQUASHFS error: xz_dec_run error, data probably corrupt [ 0.980000] SQUASHFS error: squashfs_read_data failed to read block 0x29a72 [ 0.990000] SQUASHFS error: Unable to read fragment cache entry [29a72] [ 1.000000] SQUASHFS error: Unable to read page, block 29a72, size 14c50 [ 1.010000] SQUASHFS error: Unable to read fragment cache entry [29a72] [ 1.020000] SQUASHFS error: Unable to read page, block 29a72, size 14c50 [ 1.260000] SQUASHFS error: xz_dec_run error, data probably corrupt Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37965 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13ar71xx: add support for TL-MR3040 v2juhosg
This patch adds support for building firmware images for the TP-Link TL-MR3040 v2. Tested and working on v2.1 hardware. Signed-off-by: Mads Hansen <d@taba.se> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37964 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13ar71xx: add wireless bgn led support for dir-825-c1juhosg
I checked the GPL code drop from D-Link and tried to get the wireless and LAN switch LEDs to light up. I found some references in AthSDK/www/DIR-825_C1/bsp.h as well as AthSDK/www/DIR-825_C1/rootfs/etc/sysconfig/S2gpio.sh, but in the end I only got the led for 2.4GHz to work. Anyway, here's the patch. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37963 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13uhttpd: udpat to git headjow
- fixes buffer corruption with JSON-RPC list calls - change JSON-RPC protocol to include the session ID into the call attributes instead of passing it via the URL - forcibly pass effective session ID as "ubus_rpc_session" attribute to called procedures - change ubus acl checking to conform with new ubus session namespace git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37962 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13rpcd: update to git headjow
- recalculate session ACLs on reload - support negative access group expressions in /etc/config/rpcd - prevent destryoing the default session - use "ubus_rpc_session" attribute as session identifier to enforce JSON-RPC proxy security git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-12kernel: gsc depends on kmod-i2c-coreluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-12brcm47xx: remove support for kernel 3.8hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-12brcm47xx: add default config for new kernel config optionhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-12kernel: update bcma and ssb to wireless-testing master-2013-09-09hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-12kernel: add support for ESMT F25L32PA with upstream submissionluka
Signed-off-by: Flavio Silveira <fggs@terra.com.br> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-12odhcp6c: Timing workaround for buggy serverscyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11kernel: fix imx sata moduleluka
The imx sata module has only been backported to imx6 target. This change will fix buildbot errors due to missing patches in other targets. Keep this until all targets use kernel version with imx sata support in them. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11kernel: align the skb padding to power of twonbd
The skb is usually started by a padding which allows the protocols in the network stack to add their headers in front of the payload. The skb can be reallocated in case the preallocated padding is not large enough. This can for example happen in the function __skb_cow which will check the requested extra headroom and allocate more buffer when the requested headroom is bigger than the available one. The extra buffer is aligned again to the multiple of the NET_SKB_PAD of the target architecture. The macro used to create the multiple of the NET_SKB_PAD is written in a way which allows only values power two as alignment parameter. The currently used value of 48 bytes can not be written as n ** 2 but as 2 ** 4 + 2 ** 5. The extra buffer is therefore not always the multiple of 48 but can be 16, 64, 80, 128, 144 and so on. The generated values are also not monotonic (48 requested bytes are mapped to 80 allocated bytes and 49 requested bytes are mapped to 64 allocated bytes). These unexpected small values result in more reallocations of the buffer. This was noticed prominently during tests between two QCA9558 720 MHz devices which were connected via ethernet to PCs and had a HT40 802.11n 3x3 link between each other. The throughput PC-to-PC during iperf TCP runs increased reliable from 186 Mibit/s to 214 Mibit/s in one direction and from 195 Mibit/s to 220 Mibit/s in the other direction. This is a performance increase of ~14% just by reducing the amount of reallocations. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37948 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11toolchain/gcc: upgrade linaro gcc 4.6 to 4.6-2013.05nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37947 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11toolchain/gcc: fix up breakage introduced in r37945nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37946 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11[toolchain/gcc]: upgrade Linaro gcc 4.8 to 4.8-2013.08kaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11[toolchain/binutils]: add support for Linaro binutils 2.23.2-2013.06kaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37944 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11[toolchain/gdb]: upgrade to 7.6-2013.05kaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37943 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11kernel: fix broken depends syntax introduced in r37933florian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37942 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11rpcd: update to git headjow
- introduces persistent null session to allow access to procedures without login - implements session.login procedure to support user logins via json-rpc git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37941 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11kernel: Fix FIQ code on VIVT CPUs (#14145)florian
Backport an upstream patch to fix FIQ code on VIVT CPUs Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37940 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11toolchain: refresh uClibc patchesflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11toolchain: define MUSL dynamic linker for SPARCflorian
SPARC builds are currently broken because we do not define the MUSL dynamic linker name, fix that. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37938 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-10kernel: add imx sata moduleluka
Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37937 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-10imx6: backport ahci supportluka
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37936 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-10imx6: add i2c retry on NAKluka
Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-10imx6: add gpio sysfs supportluka
Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37934 3c298f89-4303-0410-b956-a3cf2f4a3e73