summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-09-06brcm63xx: switch to linux 3.10jogo
3.10 is stable enough, and 3.9 is EOL since a while. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05odhcp6c: more compatibility fixescyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37907 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05kernel: b53: support phy ids for BCM5365jogo
BCM5365 (and probably other older variants) use a different phy id, so the phy driver never attached for them. Fix this by adding the appropriate phy id to the fixup and the phy driver. Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05mac80211: kmod-rtl_pci: fix dependencieshauke
This fixes the following error: rtl_pci: Unknown symbol rtl_lps_leave (err 0) rtl_pci: Unknown symbol rtl_lps_enter (err 0) rtl8192ce: Unknown symbol rtl_pci_disconnect (err 0) rtl8192ce: Unknown symbol rtl_pci_probe (err 0) rtl8192de: Unknown symbol rtl_pci_disconnect (err 0) rtl8192de: Unknown symbol rtl_pci_probe (err 0) rtl8192se: Unknown symbol rtl_pci_disconnect (err 0) rtl8192se: Unknown symbol rtl_pci_probe (err 0) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05kernel: kmod-libphy, kmod-tg3: fix load orderhauke
This fixes the following error: tg3: Unknown symbol mdiobus_alloc_size (err 0) tg3: Unknown symbol phy_ethtool_sset (err 0) tg3: Unknown symbol phy_mii_ioctl (err 0) tg3: Unknown symbol phy_connect (err 0) tg3: Unknown symbol mdiobus_register (err 0) tg3: Unknown symbol mdiobus_free (err 0) tg3: Unknown symbol phy_start (err 0) tg3: Unknown symbol phy_start_aneg (err 0) tg3: Unknown symbol mdiobus_unregister (err 0) tg3: Unknown symbol phy_ethtool_gset (err 0) tg3: Unknown symbol phy_stop (err 0) tg3: Unknown symbol phy_disconnect (err 0) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05kernel: kmod-ssb, kmod-b44: fix load orderhauke
This fixes the following error: b44: Unknown symbol ssb_device_is_enabled (err 0) b44: Unknown symbol ssb_pcicore_dev_irqvecs_enable (err 0) b44: Unknown symbol ssb_bus_may_powerdown (err 0) b44: Unknown symbol ssb_pcihost_register (err 0) b44: Unknown symbol ssb_device_disable (err 0) b44: Unknown symbol ssb_device_enable (err 0) b44: Unknown symbol ssb_driver_unregister (err 0) b44: Unknown symbol __ssb_driver_register (err 0) b44: Unknown symbol ssb_bus_powerup (err 0) b44: Unknown symbol ssb_clockspeed (err 0) b44: Unknown symbol ssb_dma_translation (err 0) Reported-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37903 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05kernel: kmod-firewire: fix dependencieshauke
This fixes the following error: firewire_core: Unknown symbol crc_itu_t (err 0) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37902 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05mac80211: do not download carl9170 firmware separately, but use the one from ↵hauke
linux-firemware linux-firemware contains the same version we loaded without this patch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37901 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05kernel: kmod-fs-xfs: fix dependencieshauke
This fixes the following error: xfs: Unknown symbol exportfs_decode_fh (err 0) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05kernel: kmod-usb-serial-keyspan: fix dependencieshauke
This fixes the following error: keyspan: Unknown symbol ezusb_fx1_ihex_firmware_download (err 0) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37899 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05ath10k: enable Atheros 802.11ac driverhauke
This enables usage of the ath10k driver on OpenWrt. Only 2.0 PCI hardware is supported. The ath10k firmware is currently only available through github so use that as its source for now. This goes build tested, not run time tested. [Hauke: I did some minor changes] Cc: ath10k@lists.infradead.org Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Kathy Giori <kgiori@qca.qualcomm.com> Cc: Mathieu Olivari <mathieu@qca.qualcomm.com> Cc: Jerome Proffit <jproffit@qca.qualcomm.com> Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com> Cc: Matthew McClintock <mmcclint@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05Add missing symbolkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-04kernel: b53: allow access the MIB counters on BCM5365hauke
b53_no_ops has no elements and b53_port_ops has one element, this makes the code access some random memory when trying to access the mib counter functions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-03[package] kobs-ng: add new packageluka
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-03usbreset: rewrite to not rely on /proc/bus/usb anymorejow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-03ar71xx: fix NetGear initramfs image namesjuhosg
The '-initramfs' string is duplicated in the image names, fix it. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-03Fix IPv6 NAT breaking older kernelscyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02kernel: update 3.10 to 3.10.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: reorder Image/Build/* macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: simplify more oneliner macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: simplify oneliner loader macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: simplify oneliner initramfs macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: simplify oneliner buildkernel macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02scripts/feeds: ensure that --ff is enabledflorian
Users may have merge.ff set to false, which will force merge commits to be generated. The intent here is to have a fast-forward merge when possible, so let's make sure fast-forwards are enabled. Signed-off-by: John Szakmeister <john@szakmeister.net> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02build scripts: fix 'make defconfig' damageflorian
Looking at the target 'defconfig' in include/toplevel, it doesn't directly reference $(HOME)/.openwrt/defconfig nor does it reference any prerequisites using it as a target. Therefore, building "defconfig" as a target uses the defaults in the tree, but not the defaults that a user might have explicitly specified. This patch fixes this regression from r36361. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> [florian: apply with the proper patch level, wrap at 80 columns] Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02mcs814x: dlan-usb-extender: fix usbdev triggerflorian
Every device I connect to the USB port is detected as 2-1, not 1-1. So adjust the default setting accordingly. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: optimize kernel generationjuhosg
When the squashfs and jffs2 images are generated in the same turn, the compressed kernel images are generated twice with the same parameters. Move compressed kernel generation into a separate phase to avoid that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02generic: remove linux version checks from myloader.cjuhosg
The myloader partition parser code uses ifdef wrappers to make the code usable on kernels below version 3.2. All targets are using kernel 3.3 at least so the wraper is not needed. Remove that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: dynamically generate Image/Build/Template/* macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: configure OBS4 line on TL-WR841N-v8/MR3420v2juhosg
It also fixes USB Power on MR3420v2. This time we took the information from the source of GPL: http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg18970.html Confirmed and tested: https://dev.openwrt.org/ticket/13201#comment:41 Thanks to oguretsagressive for testing. Signed-off-by: Dmytro <dioptimizer@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02Add rpcd - an extensible backend server for ubus-over-json-rpc operations, ↵jow
session and acl management. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: remove fs_* variables from image/Makefilejuhosg
Those are not needed since we are generating the initramfs images along with the others. Remove the variables and use the template names directly. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02package/rotary-gpio-custom: fix checkpatch errors module sourcejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02package/w1-gpio-custom: fix checkpatch errors in module sourcejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02package/i2c-gpio-custom: fix checkpatch errors in module sourcejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02package/kernel: add spi-gpio-custom modulejuhosg
The package makes it possible to create custom SPI buses via GPIO lines. This module is based on i2c-gpio-custom and allows to configure an SPI bus via GPIO lines and expose it to userspace without rebuilding the kernel. This is maily intended to connect microcontrollers and other simple SPI devices without making an ad-hoc kernel driver. Signed-off-by: Marco Burato <zmaster.adsl@gmail.com> [juhosg: - change subject, - extend and reformat commit message, - cleanup checkpatch errors/warnings in module source] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37872 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: fix initramfs image generation for Cameo933x profilesjuhosg
Initramfs images are not generated for profiles which are using the squashfs-only template. Add the missing 'Image/Build/Template/squashfs-only/initramfs' to fix that. Also, 'Image/Build/Cameo933x/initramfs' uses wrong parameters for 'MkuImageLzma/initramfs' due to a misplaced commma. Remove that to fix the generated initramfs images. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02x86/alix2: remove kernel config for 3.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37870 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02x86/alix2: switch to 3.10.9juhosg
Taken from the 'alix2: update to LINUX_VERSION 3.10.9' patch: http://patchwork.openwrt.org/patch/3971/. Russell says in the original patch: "Initial whack at updating alix2 to a current kernel. It builds and runs without problems so far. I copied target/linux/config-3.8, target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to their 3.10 equivalents and tweaked until it built. The patches required no changes." Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37869 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02x86/alix2: add kernel config for 3.10juhosg
Taken from the 'alix2: update to LINUX_VERSION 3.10.9' patch: http://patchwork.openwrt.org/patch/3971/. Russell says in the original patch: "Initial whack at updating alix2 to a current kernel. It builds and runs without problems so far. I copied target/linux/config-3.8, target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to their 3.10 equivalents and tweaked until it built. The patches required no changes." The current patch contains additional configuration tweaks. Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37868 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02x86: add support for 3.10juhosg
Add kernel configuration and patches for Linux 3.10. Taken from the 'alix2: update to LINUX_VERSION 3.10.9' patch: http://patchwork.openwrt.org/patch/3971/. Russell says in the original patch: "Initial whack at updating alix2 to a current kernel. It builds and runs without problems so far. I copied target/linux/config-3.8, target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to their 3.10 equivalents and tweaked until it built. The patches required no changes." The current patch contains additional configuration tweaks, and the kernel patches were refreshed. Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37867 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-01netfilter: Add IPv6-NAT support for kernel and iptcyrus
Thanks to Berni, Adam Novak and Sedat Dilek for patches and inspiration git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37866 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-01iptables: Update to 1.4.20cyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37865 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-31scripts/checkpatch.pl: Fix whitespace errorsacinonyx
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37864 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-31scripts/{cleanfile,cleanpatch}: Add scripts for cleaning up file and patch ↵acinonyx
whitespaces Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37863 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-31scripts/checkpatch.pl: Remove checks for __setup's documentationacinonyx
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-31scripts/checkpatch.pl: Remove check for deprecated featuresacinonyx
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37861 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-31scripts/checkpatch.pl: Introduce 'checkpatch.pl' scriptacinonyx
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37860 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-29imx6: add uboot-envtools to default packagesluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37859 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-29[package] uboot-imx6: update to v2013.07luka
Update includes upstream support for Wandboard Quad too. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37858 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-20 07:18:55 +0000