summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-06-15(6/6) bcm57xx: packagenbd
This is the bcm57xx package. I have tested default vlan functions, but I dont have the equipment to test more advanced setups. The default vlan setup seems to be working fine. I also added the activate_gpio parameter which will make the driver activate the switch via gpio before probing for it. I'm not sure which method is best for autoload. For the wrt350n, I need the activate_gpio parameter. But its probably not a good idea to add that to the autoload file. On a system without a bcm57xx switch, isn't it a bad idea to mess with the gpios looking for the switch? Ideally, wouldn't it be best to load the bcm57xx module from broadcom-diag, after it has determined which router its on? I tried using 'request_module' from there, but had no success. For now, I am relying on preinit to load the bcm57xx module with activate_gpio param, after it has failed to load switch_robo and switch_adm. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-15(5/6) bcm57xx: bcm4785 incomplete rebootnbd
I noticed my wrt350n would not reliably reboot after entering the reboot command. I found this code in the source for the wrt600n. It corrects the problem, and the wrt350n reboots reliably now. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-15(4/6) bcm57xx: switch-core.c/switch-robo.c check for port already registerednbd
This patch prevents switch-robo.c from attempting robo_probe on a port that is already registered. robo_probe will adjust kernel reference counts if it detects a switch on the port. If this patch wasn't applied, the wrt350n would hang on reboot, waiting for the network driver reference count to reach zero indefinitely. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11469 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-15(3/6) bcm57xx: preinitnbd
This patch allows the bcm57xx module to work correctly with failsafe mode. insmod doesn't return an error when a module loads but doesn't detect a switch. I added the check_module function to load the module, then make sure it doesn't just exit immediately. This allows preinit to only attempt to load the bcm57xx module when switch-robo and switch-adm dont detect a switch. The activate_gpio parameter to bcm57xx simply instructs the module to attempt to activate the switch via gpio before probing for the switch. Tested on wrt350n. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-15(2/6) bcm57xx: netconfignbd
Update the netconfig script to support boardtype 0x478. I've tested this on the wrt350n, hopefully it will match the 600n as well. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11467 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-15(1/6) bcm57xx: init from diagnbd
I've been working to finish up the bcm57xx module package nbd posted a few months ago. I am no expert, just had some spare time and some motivation. Here is the background: https://dev.openwrt.org/ticket/2744 This first patch disables the bcm57xx gpio setup in broadcom-diag. The switch needs to be initialized by the driver so the driver can then reset the switch ASAP. If the switch isn't reset quickly enough, it will forward packets between the WAN and LAN, which will cause problems with modems that only allow one mac to access the internet. Tested on wrt350n. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11466 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-13Remove ssb headers from mac80211 to avoid conflict with in-kernel onesnoz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-13remove accidentally committed swap filenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-13create a platform config-* file if there is none already when running ↵nbd
kernel_menuconfig or kernel_oldconfig git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-13temporary hack to fixup the mach id for the wrt350nv2kaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-13openwrt partition map for the wrt350nv2kaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-13workaround bogus CFI version for the wrt350nv2kaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11457 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-13upgrade orion and sync to 2.6.26-rc6kaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11456 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-13another patch fixnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-13fix a small commentnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-13fix ANI and make use of it in all modes except for monitornbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-12ar7: refresh patchesmatteo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-12avr32: clean and refresh patchmatteo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-12avr32: upgrade to 2.6.25.6matteo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-12use the european kernel.org mirror toomatteo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11448 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-12Use 2.6.25.6 for rdcflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-11make ip-up scripts aware of network settingsblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-11system now knows which timezone it is inblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11445 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-11fix missing package compile/installation issuenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-11Use 2.6.25 for rdc321xflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-11Add syskonnect yukon2 support (#2568)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11437 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-11upgrade orion to 2.6.26-rc5kaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11436 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-11upgrade to 2.6.25.6kaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11435 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-11refresh patchkaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-11add newer, fixed IMQ patch for 2.6.25 and 2.6.26kaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-11fix some previously ignored build dependencies (for example, uci->lua)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11429 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-10consider virtual dependencies (generated by using PROVIDES:=) when ↵nbd
generating the build dependencies (fixes python build dependency errors) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11428 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-10[kernel] generic-2.6: revert yaffs changes [11378], the new code is not ↵juhosg
working correctly on RouterBoards git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11427 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-10adds missing patch for native toolchainblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11425 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-09fix make menuconfig/oldconfignbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11415 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-09large improvement for parallel builds. works without V=99 now and without ↵nbd
warnings. tested with -j on an 2x dual core opteron machine git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11414 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-09add missing fix for etrax compile without axis toolchainnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11413 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-09fix a small dep bug in the docs/ dirnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11412 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-09allow parallel downloading for make downloadnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11411 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-09set marvell switch ATU ageing time to minimum instead of maximum - hopefully ↵nbd
fixes some fonera 2.0 ethernet issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-09madwifi: remove unnecessary part of the 349-reset.patch, add an ANI fix for ↵nbd
future HALs git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11409 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-08Compilation fix for hostapd with newer mac80211 code. Thanks Hauke Mehrtens.noz
Fixes #3501 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11407 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-08remove proc and char dev from ifxmips gpio driverblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-08adds gpiodev support to ifxmipsblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11405 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-08[adm5120] add packages required by failsafe support to defaultsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11404 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-08[adm5120] add initial failsafe supportjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-08[adm5120] add button devices to several boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11402 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-07[package] add button-hotplug driver, will be usable to check status of ↵juhosg
buttons connected to GPIO lines git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11401 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-07[rb532] fix image names in the wget2nand scriptjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-07[adm5120] fix image names in the whet2nand scriptjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11399 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 15:41:33 +0000