summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-02-22b53: Make b53_switch_init staticjogo
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4869/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22b53: Add BCM53128 switch supportjogo
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4867/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: fix RG100A/DB120 usb port numberjogo
Set usbh ports to 2 to fix #15007. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: fix number of usb ports for HW556 variantsjogo
Don't only fix up the fallback board, but also all three variants. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: add initial support for BCM963268BU_P300 reference boardjogo
Only netboot tested, so no images or now. GbE ports are only working in FE mode, and leds do not work. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: add VW6339GU supportjogo
Completely untested except for booting from network; wan port only works in 10/HD, lan1 only in 100/FD. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39678 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: fix number of switch ports for BCM63168/63268jogo
BCM63168 has 6 ports (3 FE PHY, 1 GE PHY, two RGMII) and BCM63268 has two additional RGMII ports, making it 8. Fix this by checking the chip variant and applying an appropriate limit. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39677 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: F@ST2504n board support (image, base-files)fast2504n-3.10.28-mergedjogo
Signed-off-by: Max Staudt <openwrt.max@enpas.org> Patchwork: http://patchwork.openwrt.org/patch/4730/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39676 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: F@ST2504n board supportjogo
Signed-off-by: Max Staudt <openwrt.max@enpas.org> Patchwork: http://patchwork.openwrt.org/patch/4729/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: add support for Asmax AR 1004g routerjogo
Support for Asmax AR 1004g router Signed-off-by: Adrian Feliks <mexit@o2.pl> Patchwork: http://patchwork.openwrt.org/patch/4464/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39674 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: Add profile and build image for Sagemcom F@ST2704V2 ADSL routerjogo
This adds profile and build image for Sagemcom F@st2704, using b43 driver. For WiFi to work properly BCMA fallback SPROM support patch must be applied (http://git.io/z1Ki8A). Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4212/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: Add userspace support for Sagemcom F@ST2704V2 ADSL routerjogo
This adds userspace support for Sagemcom F@st 2704 router. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4215/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL routerjogo
This adds kernel support support for Sagemcom F@st 2704 wireless ADSL router. It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+ modem equipped with 64 MiB RAM and 8 MiB flash. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4266/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39671 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-21kernel: add missing depends on kmod-miihauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-21kexec-tools: disable lzma supporthauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-21odhcpd: fix wrong address pool being advertisedcyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-21[base-files]: the root password should be empty for real, like beforekaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39650 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-21firewall: fix validation constraintsjow
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-21netifd: fix validation constraintsjow
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-20firewall: fix several ipset integration issues (#15016)jow
- Do not consider bitmap storage for IPv6 family sets - Move ipset family parameter before any additional option - Only emit family parameter for hash sets - Do not allow IPv6 iprange for IPv4 sets and vice versa Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39647 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-206in4: add support for he.net updatekeycyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39646 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-20imx6: update Ventana dtsluka
Update the Ventana device-tree to match upstream: - Add IMX6Q/IMX6DL variants for GW54xx/GW53xx/GW52xx/GW51xx - align pinctrl with upstream - consolidate multiple patches into one Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39644 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-20imx6: enable IMX6 watchdogluka
Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-20ar71xx: rb91x: fix pll_1000 value for eth0 to avoid packet lossjuhosg
When the RB91x device uses a GbE link the connection suffers from packet loss: root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 20 -q PING 192.168.1.254 (192.168.1.254): 65507 data bytes --- 192.168.1.254 ping statistics --- 20 packets transmitted, 9 packets received, 55% packet loss round-trip min/avg/max = 4.570/4.815/4.999 ms Using a different PLL value fixes the issue. root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 100 -q PING 192.168.1.254 (192.168.1.254): 65507 data bytes --- 192.168.1.254 ping statistics --- 100 packets transmitted, 100 packets received, 0% packet loss round-trip min/avg/max = 4.449/5.413/13.870 ms Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-20ar71xx: Add support for MikroTik RB951Ui-2HnDjuhosg
I noticed that the patch at http://patchwork.openwrt.org/patch/4017/ for adding support for the MikroTik RouterBOARD 951Ui-2HnD had been abandoned because it wasn't generated and sent to the mailing list correctly and doesn't apply as a result. I have cleaned up this patch. When testing this on real hardware, I also noticed that wireless didn't work, so this patch fixes that as well. This patch applies cleanly to SVN 39392. Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> Patchwork: http://patchwork.openwrt.org/patch/4773/ [juhosg: - drop the 'rb951ui_wlan_init' function and rework the code to use the recently introduced rb95x_wlan_init function instead, - fix GPIO number of the port5 LED, - rename LEDs according to the standard LED naming conventions, and use 'rb' prefix in the names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39641 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-20kernel/3.10: improve fq_codel hashing for 6in4 6to4 801.ad and IPIP casesjuhosg
This is a backport of code to improve the quality of fq_codel hashing for 3.10 for some encapsulated protocols. Not needed in 3.11 and later. Patch-by: Dave Taht <dave.taht@bufferbloat.net> Patchwork: http://patchwork.openwrt.org/patch/4902/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-20imx6: drop upstream rejected patchluka
http://article.gmane.org/gmane.linux.drivers.i2c/17891 Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39639 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-19gcc: prevent the use of LDRD/STRD on ARMv5TEnbd
These instructions are for 64-bit load/store. On ARMv5TE, the CPU requires addresses to be aligned to 64-bit. When misaligned, behavior is undefined (effectively either loads the same word twice on LDRD, or corrupts surrounding memory on STRD). On ARMv6 and newer, unaligned access is safe. Removing these instructions for ARMv5TE is necessary, because GCC ignores alignment information in pointers and does unsafe optimizations that have shown up as bugs in various places. Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39638 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-19ar71xx: add profile and build image for TP-Link TL-WDR4900 v2.0 boardjuhosg
Patch-by: TenNinjas <tenninjas@tenninjas.ca> Patchwork: http://patchwork.openwrt.org/patch/4850/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-19ar71xx: add user-space support for TP-Link TL-WDR4900 v2.0 boardjuhosg
Patch-by: TenNinjas <tenninjas@tenninjas.ca> Patchwork: http://patchwork.openwrt.org/patch/4849/ [juhosg: - use the Archer C7 specific LED setup instead of adding identical code] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39636 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-19ar71xx: add kernel support for the TP-Link TL-WDR4900 v2.0 boardjuhosg
Patch-by: TenNinjas <tenninjas@tenninjas.ca> Patchwork: http://patchwork.openwrt.org/patch/4848/ [juhosg: - rename and refresh kernel patch, - merge the board setup code into mach-archer-c7.c and drop mach-tl-wdr49000-v2.c] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-19sunxi: move a lost CONFIG_CHARGER symbol to genericnico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39634 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18target/sunxi: make REGMAP built-in (used by REGULATOR)nico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39633 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18target/uml: update READMEnico
invoking uml is now simplier, not need to setup console & serial git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39632 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18toolchain: update build steps docnico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18mac80211: disable libertas-sd on uml targetnico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39630 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18uboot-envtools: pass target cflagsnico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18odhcp6c: readd userclass and vendorclasscyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39628 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18kernel: refresh configs with kconfig.pljuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18ar71xx: fix unaligned access hacks for tcp timestampsjuhosg
This missing bit of the hack saves hugely on instruction traps on tcp connections to ar71xx based routers. Patch-by: Dave Taht <dave.taht@bufferbloat.net> Patchwork: http://patchwork.openwrt.org/patch/4905/ [juhosg: adjust subject, refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18ar71xx: WNR2200: fix mounting root fs problemjuhosg
Solves ticket #14356 <https://dev.openwrt.org/ticket/14356> Without this patch, UART output will show only 4 partitions: [ 0.740000] 4 cmdlinepart partitions found on MTD device spi0.0 [ 0.750000] Creating 4 MTD partitions on "spi0.0": [ 0.750000] 0x000000000000-0x000000050000 : "u-boot" [ 0.760000] 0x000000050000-0x000000070000 : "u-boot-env" [ 0.770000] 0x000000070000-0x0000007f0000 : "firmware" [ 0.790000] 0x0000007f0000-0x000000800000 : "art" and then linux complains :VFS: Cannot open root device "(null)" With this patch, UART out will show 7 partitions: [ 0.740000] 4 cmdlinepart partitions found on MTD device spi0.0 [ 0.750000] Creating 4 MTD partitions on "spi0.0": [ 0.750000] 0x000000000000-0x000000040000 : "u-boot" [ 0.760000] 0x000000040000-0x000000050000 : "u-boot-env" [ 0.770000] 0x000000050000-0x0000007f0000 : "firmware" [ 0.780000] 2 netgear-fw partitions found on MTD device firmware [ 0.780000] 0x000000050000-0x00000014b440 : "kernel" [ 0.790000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 0.800000] 0x00000014b440-0x0000007f0000 : "rootfs" [ 0.810000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 0.820000] mtd: device 4 (rootfs) set to be root filesystem [ 0.830000] 1 squashfs-split partitions found on MTD device rootfs [ 0.830000] 0x000000340000-0x0000007f0000 : "rootfs_data" [ 0.840000] 0x0000007f0000-0x000000800000 : "art" This patch is tested against r39502 of trunk. Signed-off-by: Jonathan Chang <changcs@santos.ee.ntu.edu.tw> Patchwork: http://patchwork.openwrt.org/patch/4870/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18odhcp6c: add validation rules to proto handlerblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18relayd: add uci validationblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39623 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18mac80211: add validation rulesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39622 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18netifd: add validation supportblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39621 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18hostapd: add validation rules to wireless handlerblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39620 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18ppp: add validation rules to proto handlerblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39619 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18comgt: add validation rules to proto handlerblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39618 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18firewall3: update init.d script to make use of procdblogic
add validation data Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18ubox: logd did not register its config.reload trigger properlyblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39616 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-20 12:33:39 +0000