summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-27kernel: add a few patches for avoiding unnecessary skb reallocations - ↵nbd
significantly improves ethernet<->wireless performance with mac80211 based drivers git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: build images for DSL-274XB revision F1jogo
Build images for D-Link DSL-274XB revision F1. Flashing through original web UI as well as CFE works. Known issues: * wifi led inverted (on when wifi is off and vice cersa) * same issues as generic bcm6328 support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: add ath9k to atheros wifi profilejogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: enable bcm6328 support and required driversjogo
BCM6328 support is in a usable state, with the following issues * internal switch port not configurable * external phys not supported * broadcom wifis will probably not work correctly * and all other generic bcm63xx issues (so yes, still no ADSL) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: add support for DSL-274XB rev F1jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: fix port state after network downjogo
bcm_enetsw_probe did not properly reset port states, resulting in connected ports staying disabled after bringing up the interface the second time. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: add a fixup for ath9k devicesjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: add support for the HSSPI controllerjogo
Add support for the HSSPI controller found on bcm6328 and SPI attached flash. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: add preliminary support for bcm6328jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: add flash type detectionjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: pad Speedport W303 V images to 4 MiBjogo
Prevents CFE from flashing to the second image offset. Fix up the rootfs length on first boot else CFE will complain. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27tools: imagetag: add parameter for padding imagesjogo
Allow images to be padded to a certain size. This prevents CFE from flashing them to the second image offset. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: add a default switch configuration for DSL-274XBjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: setup network config through uci-defaultsjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: move the board name workaround to /lib/brcm63xx.shjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31872 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: use the exact board id as board identification stringjogo
No need to keep the bcm63xx/ at the start or the chipid info at the end. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27kernel: remove a few more obsolete CompareKernelPatchVer calls, add ↵nbd
dependencies on @TARGET_x86 for a few network drivers that are typically not found in non-PC equipment git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31870 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-26netifd: fix "Command failed: Not found" error with dhcpnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31863 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-26mac80211: backport a fix for single-queue drivers (fixes #11534)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-26ncurses: libncursesw should not depend on libncursesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31861 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-26ppp: add back ip-{up,down}.d support for nownbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31860 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-26mac80211: get rid of duplicate iw reg set command (thx, stintel)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31859 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-25netifd: update to latest version, fixes an endian issue in broadcast address ↵nbd
handling git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31858 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-24netifd: update to latest version, fixes overriding the mac address for ↵nbd
bridge interfaces (#11526) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31857 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-24kernel: fix a warning in the connmark modulenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-24netifd: bring up wifi at bootnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-24[package] util-linux: compile with -fPIC, some users of its libuuid.a ↵jow
require it, e.g. cryptsetup (#11508) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31854 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23base-files: kill ubusd and udhcpc on sysupgrade as wellnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23base-files: allow sysupgrade to kill netifd, fixes pppd shutdown on upgradenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23netifd: improve /sbin/ifup wifi hack, make it work properly with -a. fold ↵nbd
/etc/init.d/netifd into /etc/init.d/network git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23[package] netifd: port r27720 (#9763) to the netifd ifup variantjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23kernel: update linux 3.3 to 3.3.7juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23ar71xx: fix an insignificant typojuhosg
Patch from #11485. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnDjuhosg
Patch by Kamil Trzciński <ayufan@osk-net.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23ar71xx: add support for TP-Link TL-MR3040juhosg
Support for TP-Link TL-MR3040. Power LED not working - always on red, after start should be green. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23ramips: Add byte queue limits support to net/ethernet/ramips_main.cjuhosg
Add byte queue limits support to net/ethernet/ramips_main.c "Byte queue limits are a mechanism to limit the size of the transmit hardware queue on a NIC by number of bytes. The goal of these byte limits is too reduce latency (HOL blocking) caused by excessive queuing in hardware (aka buffer bloat) without sacrificing throughput." Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23ramips: Enable sysupgrade for Sitecom WL-351juhosg
Sysupgrade works just fine on my Sitecom WL-351 after adding this oneliner. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23package/base-files: copy /lib/functions.sh to the ramfs on sysupgradejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driverjuhosg
Should fix #11513. Tested with the x86/generic squashfs image within a VM. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23netifd: update to latest version, adds interface alias support (#11518), and ↵nbd
fixes network route drops on dhcp renew git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-20lantiq: allow platforms with rt2x00 to override the mac address without ↵nbd
overriding eeprom, fixes bogus wlan mac address on arv4520 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-20kernel: fix kmod-sched-core build for kernels without codelnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-20pppd: add noipdefault option to /etc/ppp/options (fixes #11499)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31831 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-20netifd: update to latest version, fixes dns server issues (#11501)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31830 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-19netifd: update to latest version, fixes peerdns handling, custom dns ↵nbd
override and interface metric settings git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-19[package] kernel: fix packaging of act_connmark.ko (#11492)jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-19[package] openssl: update to v1.0.1c (CVE-2012-2333)jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-19[package] dnsmasq: bump package revisionjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31817 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-19dnsmasq: allow forcing optionsjow
The option 'force' when set to '1' will transform a dhcp-option to dhcp-option-force instead in the config. This is useful for forcing options to be sent back to a client (even options it didn't ask for). Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31816 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-19dnsmasq: add support for set: and tag: pairsjow
On my network, I have a variety of machines and appliances, some of which need different configuration issues than the default options. For example: config host option name 'client' option mac '00:01:02:03:04:05' option ip '192.168.1.20' option tag 'acme' config tag acme option force '1' list dhcp_option 'option:router,192.168.1.253' list dhcp_option 'option:domain-name,acme.com' list dhcp_option 'option:domain-search,acme.com,redfish-solutions.com' which allows me to override the default router for my client's host, as well as its domain-name, and its domain-search. this causes the following config lines: dhcp-host=00:01:02:03:04:05,set:acme,192.168.1.20,client dhcp-option-force=tag:acme,option:router,192.168.1.253 dhcp-option-force=tag:acme,option:domain-name,acme.com dhcp-option-force=tag:acme,option:domain-search:acme.com,redfish-solutions.com This could be useful elsewhere, for instance, if you have an IP CCTV that you don't want to have a default-route, etc. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31815 3c298f89-4303-0410-b956-a3cf2f4a3e73