summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-13brcm63xx: add initial support for BCM6318jogo
Add inital support for BCM6318, but keep it disabled for now until most things are supported. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: add initial support for BCM63268jogo
Add initial support for the BCM63268 family of SoCs, but keep it disabled for now as most things don't work yet. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: fix the pcie window sizejogo
The low PCIe window on BCM6328 and BCM6362 is actually only 1 MiB big, not 16 MiB. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39270 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: add support for chip variantsjogo
Some SoCs have variants which are mostly the same, but use a different chip id (or not). Add code for detecting them and handling them as their standard counterparts. This adds support for e.g. BCM6369. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: remove non runtime detect and refresh affinity patchesjogo
Remove the non runtime detect code since its effectiveness is dubious and almost never used. Also update affinity patches to work on top of it. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: update bmips patches with upstream submissionjogo
Update bmips cleanup patches with upstream submission and backport a few bmips fixes. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39267 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: spi flash on legacy spi controller needs the workaroundjogo
Fixes generic SPI flash accesses on BCM6358/BCM6368. BCM6338 still needs additional fixes for M25P80, so it remains broken for now. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39266 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: fix legacy spi tranfers >= 256 bytesjogo
Fixes e.g. SPI flash access on BCM6358/BCM6368. Transfers < 256 bytes are not affected. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39265 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: update HSSPI driver with upstream submissionjogo
Update the HSSPI driver with the upstream submitted one that has a workaround for the auto cs down issue. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12sunxi: various changeswigyori
- rename hstimer DT on sun5i to avoid confusion - add Cubietruck support - select watchdog by default - select rtc in profiles where appropriate - cosmetic changes Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39263 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12x86: remove unused code for kernel 3.7hauke
There are no generic patches for kernel 3.7 any more, remove this stuff. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12[packages] uboot-sunxi: - add support for Cubietruckwigyori
- cosmetic change: have the options listed alphabetically Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39261 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12remove empty directorieshauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12targets: remove empty directorieshauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39259 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm47xx: add brcmsmac + bgmac profilehauke
Signed-off-by: Cody P Schafer <devel@codyps.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12broadcom-diag: remove devices already supported by the kernelhauke
This driver will soon be removed completely and the scripts are already using the new API. This also removes bcm57xx_init() which restarts the switch and is now done by b53. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm47xx: parse model from cpuinfohauke
Instead of looking into the proc entry provided by broadcom-diag use the board info from /proc/cpuinfo to get the board we are on. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm47xx: fix led indicationhauke
Use the new led api also on brcm47xx. The led for failsafe indication is searched for. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm47xx: fix network failsafe indicationhauke
Remove the code used on the old switch driver. The Ethernet drive is loaded as a module and needs some time to get up therefor we added some wait function. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm47xx: do not use broadcom-diaghauke
This makes brcm47xx target use the default gpio led and button driver and not broadcom-diag any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm47xx: add new led and button supporthauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm47xx: update some patches to versions in linux mainlinehauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39251 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm74xx: fix patch for BCM4706 CPUshauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39250 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm47xx: update mtd drivershauke
This backports some patches from linux upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39249 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12ralink: don't build mkhilinkfw untilt he ssl header dependency is resolvedblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12mpc85xx: preallocate SPI transfer bufferjuhosg
This helps to avoid high order alloction failures. Closes #14702. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39247 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12ubox: welcome to 2014blogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12ralink: fix eeprom loadingblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39245 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12ubox: update to latest git - fixes error reportingblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12firmware-utils: mkhilinkfw breaks the build botsblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12Fix build for individual profiles with dashes in namesblogic
Config symbols can have regular dashes, e.g. CONFIG_TARGET_ramips_rt305x_UR-336UN=y So no substitution should be performed on the last part of the symbol. Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12ralink: fix WHR-600D and WHR-300HP image generationblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39241 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12ralink: fix WHR-600D pcie supportblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39240 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12mac80211: enable ralink ap+sta supportblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39239 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12firmware-utils: add HLK-RM04 toolblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39238 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12ralink: add HLK-RM04 supportblogic
https://github.com/JiapengLi/OpenWrt-HiLink-HLK-RM04 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12ralink: switch to askconsoleblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39236 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12ralink: fix uartf memory range sizeblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39235 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12ralink: honour memory@0 nodeblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12ralink: fix rt5350 ethernetblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39233 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12netifd: fix mac80211.sh to respect setting of mcast_rateblogic
This patch fixes a bug in /lib/netifd/wireless/mac80211.sh, where the UCI setting of wireless multicast traffic (in uci: mcast_rate) is not respected within netifd. Especially in Freifunk mesh networks the olsr routing as effected by this, as only the lowest mcast_rate was used, even when uci ncast_rate was set to something else. In function mac80211_setup_adhoc() the value of mcast_rate is missing in json_get_vars. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12hostapd: fix frequency setting for IBSS/RSNblogic
Introduced by ("netifd: add wireless configuration support and port mac80211 to the new framework") Reported-by: René van Weert <rene@sowifi.com> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12lantiq: improve Arcadyan ARV4510PW supportblogic
Arcadyan ARV4510PW has already a build profile in OpenWrt, but it is severely lacking. This patch brings it up-to-date. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12swconfig: improve usability when switch device incorrectblogic
http://patchwork.openwrt.org/patch/4701/ Signed-off-by: Andreas Mohr <andim2@users.sf.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12libjson-c: also install .pc file for compatibility libjsonblogic
Older packages, which did not follow the renaming yet, do not find the library otherwise via pkgconfig. Signed-off-by: Michael Heimpold <mhei@heimpold.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39228 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12samba: add browsable optionblogic
https://dev.openwrt.org/ticket/14682 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39227 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12lantiq: fix atm compileblogic
https://dev.openwrt.org/ticket/14633 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39226 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12add git-src to .gitignoreblogic
Signed-off-by: Daniel Golle <daniel.golle@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39225 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12rpcd: build, uci and session api fixesjow
- fix CMakeFile to support rpcd out of tree builds - fix a possible file descriptor leak in the session deserialization code - add uci.state call which is equivalent to uci -P /var/state get ... - make uci.changes "config" argument optional to allow listing all deltas in one go - fix inverted check in uci.commit and uci.revert, resulting in eroorneous permission denied responses - only trigger config change events if libuci was able to parse the config - rename misleading "commit" argument of uci.apply to the more appropriate name "rollback" Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39224 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-11sunxi: various changeswigyori
- let LBDAF be set by generic config - add high-speed timer support - refresh sun5i USB patch Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39223 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-29 20:30:17 +0000