summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-25ar71xx: add profile and build image fot the TL-WA830RE v1 boardjuhosg
Added support for the TP-LINK TL-WA830RE v1 Range Extender. Based on the WA901ND v1 support. Hardware IDs checked against original firmware. Patch was successfully tested on hardware. Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-25ar71xx: add model detection for the TL-WA830RE boardjuhosg
Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-25firmware-utils/mktplinkfw: add support for the TL-WA830RE v1/v2 boardsjuhosg
Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-25ath9k: issue a cold reset after failures or after bringing the chip out of ↵nbd
full sleep - fixes many kinds of DMA issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35785 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-24brcm47xx: use same board detection code as kernel 3.8hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35770 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-24adm5120: add support for 3.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35769 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-24adm5120: remove __dev{init,exit} annotationsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35768 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-24broadcom-wl: hack to work around a bug in the PCIe controllerhauke
Thank you nlh This closes #12930. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35767 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-24broadcom-diag: add support for e3200 v1hauke
Hex values in nvram seem to be uppercase on my e3200 device. Define one power led and two buttons (reset/wps). Signed-off-by: Tijs Van Buggenhout <tvb@able.be> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35766 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-24broadcom-diag: Detection of WNDR3400v1hauke
nvram variable "boardtype" is unique for now. -button gpio were taken from nvram. -led information was taken from dd-wrt ( http://svn.dd-wrt.com/browser/src/router/libutils/utils.c ) I hope that I changed the values correctly. Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35765 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-24broadcom-diag: use new in kernel board detection codehauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35764 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-24mac80211: brcmsmac: add ap mode supporthauke
This does not work very well. I did not got this running in 5GHz mode and it was not very fast. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35763 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-24mac80211: disable ipv4/ipv6 address notifiers (fixes #13055)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35762 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-23mac80211: fix monitor mode channel reportingnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35761 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-23mac80211: fix monitor-only injectionnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35760 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-23mac80211: fix wireless extension supportnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35759 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-23mac80211: update linux-firmware to latest revisionjogo
Fixes mwl8k AP mode for 88e8366. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35758 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-23mac80211: select relayfs if ath9k debugfs is enablednbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35757 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-23package/kernel: i2c: don't skip built-in modulesjogo
Don't skip build-in modules when generating i2c kmod packages, to allow empty packages to be generated for satisfying dependencies. Closes #12259. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35755 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-23mac80211: disable building the wil6210 drivernbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35754 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-23mac80211: update to wireless-testing 2013-02-22nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35753 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-22ath9k: fix rssi issuesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-22ath9k_htc: fix signal strength reporting issuesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-22adm5120: remove a superfluous patchjuhosg
The NO_IRQ symbol is not used by the amba core since upstream commit: dfb85185bda373a70409c70c2632b02fb0f8f449 AMBA: get rid of last two uses of NO_IRQ This gets rid of the last two users of NO_IRQ in AMBA primecell drivers. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-22adm5120: avoid warning caused by wrong AMBA irq valuesjuhosg
The amba core throws a warning if -1 is used as an irq value since upstream commit: 2eac58d5026e4ec8b17ff8b62877fea9e1d2f1b3 ARM: amba: make use of -1 IRQs warn Make the core warn about the use of -1 (NO_IRQ) Cange the value of the unused IRQs to zero for the UART devices to get rid of the warning. Based on #12729. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35747 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-22firewall: fix logging rule regression (#12999)jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35745 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-22firewall3: add support for shell script and iptables-restore style includesjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35744 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-22netifd: only update resolv.conf.auto if changedcyrus
This avoids logspam under certain conditions. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35743 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21udev: Update MAINTAINER infogeoff
Signed-off-by: Geoff Levand <geoff@infradead.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35741 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21firewall3: update to git headjow
- all uci rules are boxed in custom chains now, so a firewall stop leaves user rules intact - properly handle selective ipv4 or ipv6 only firewall start/stop/restart actions - support ip ranges (e.g. option src_ip '!192.168.1.1-192.168.1.100' -> -m iprange ! --src-range 192.168.1.1-192.168.1.100') - support time options (e.g. option weekdays 'Mon Tue Sat' -> -m time --weekdays 1,2,6') git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35738 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21cns21xx: add support for 3.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21mpc83xx: add support for 3.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35736 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21ppc44x: add support for 3.8juhosg
Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35735 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21ppc40x: add support for 3.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21mpc85xx: add user-space support for the TL-WDR4900 v1juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21mpc85xx: update 3.8 configjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35732 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21ar71xx: fix MAC address assignment on the DIR-825-Bx boardsjuhosg
Use the same MAC addresses as the original firmware. Based on a patch from #10421. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Tested-by: Gabor Varga <vargagab@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21mpc85xx: add support for 3.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35729 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21ar71xx: add support for 3.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35728 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21atheros: add support for linux kernel v3.8juhosg
This builds and boots. Because of the function pointer indirection (e.g. mtd_info's read function pointer is assigned to spiflash_read), it is difficult for me to understand where the calls are coming from (could be anywhere, conditionally pointing at spiflash versions), so I punted and used the renamed function pointers (_erase, _read, _write). If someone knows better what to do, please fix. Cleaned up other sundry kernel tracking issues like get_phy_id and __devinit,etc. [juhosg: don't switch to that yet] Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35727 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21linux/3.8: add missing config symbolsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35726 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21bcm63xx: Fix sysupgrade for tag-version 7 and 8jogo
Fix sysupgrade for tag-version 7 and 8. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35724 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21generic: b53: clear SM_SW_FWD_MODE unconditionally when enabling VLANjogo
Setting this bit stops BCM53125 (bgmac actually) from receiving any packets. This bit is cleared conditionally in b53_switch_reset and it seems the same is done in bcmrobo.c which never sets that bit again. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35723 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21generic: b53: remove empty spacesjogo
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21ramips: print image build warnings/errors to stderrjogo
Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35721 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21cns21xx: print image build warnings/errors to stderrjogo
Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35720 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21ar71xx: print image build warnings/errors to stderrjogo
Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35719 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21scripts/symlink-tree.sh: print warnings/errors to stderrjogo
Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21scripts/ipkg: print warnings/errors to stderrjogo
Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21include/toplevel.mk: print warnings/errors to stderrjogo
Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35716 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-30 22:37:14 +0000