summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-01-24brcm47xx: change generic profileshauke
The default profile now contains Ethernet drivers for all the types found on supported boards. There are other profiles for each Ethernet driver. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23kernel: remove the cisco sip phone patch for 3.7 and 3.8 as wellnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23ar71xx: sync kernel sizes where possible to fix images for some devices (#12874)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23bcm63xx: switch to b53 and swconfigjogo
Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23bcm63xx: expose the internal switch to b53jogo
Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23generic: add b53 swconfig switch driverjogo
Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports switches connected through MDIO, SPI or memory mapped registers, and supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch chips. Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23bcm63xx: move bcm63xx-spi into the kerneljogo
The SPI driver is needed for supporting to boot from SPI flash on BCM6358 and BCM6368, and for SPI connected switches. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23ipv6: remove empty directorycyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23ipv6-support: don't overwrite existing setting across reflashscyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22base-files: fix network_get_prefix6cyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22base-files: Set default value for IPv6 forwardingcyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22netifd: update to latest version, adds another fix for interface aliasesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35297 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22netifd: Fix a segfault when globals.ula_prefix is emptycyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35296 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22uhttpd: always turn on TLS support, include ustream-ssl as a build dependencynbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22ustream-ssl: remove dependency conditional part to avoid build breakage when ↵nbd
no variant is selected git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22ustream-ssl: update to latest version, fixes handling large chunks of data ↵nbd
(fixes #12866) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22uboot-lantiq: upgrade to 2013.01luka
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35292 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22uhttpd: fix another small hang issue with the same symptomsnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35291 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22uhttpd: fix connection hangsnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22tcpdump: add SLL parsing support to tcpdump-mini, use -ffunction-sections, ↵nbd
-fdata-sections and --gc-sections to reduce size git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-21base-files: network.sh: fix typo in previous commitjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-21base-files: network.sh: simplify network_get_prefix6()jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-21kernel: turn on kallsyms and debug info by defaultnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-21uhttpd: fix unencrypted passwords in httpd.confnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35265 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-21ath9k: add support for more antenna mask combinations on AR93xxnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-216relayd: fix shell library includes in init-scriptcyrus
Thanks to Daniel Golle git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-216relayd: avoid a race-condition with looping RAscyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-21netifd: Fix segfaults in IPv6 prefix handlingcyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35259 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-21odhcp6c: Fix address assignment with infinite validitycyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-20uhttpd: fix selecting the right ustream implementation when openssl is to be ↵nbd
used (#12857) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-20ath9k: merge another round of cleanups and stability fixes, refresh patchesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-20netifd: update to latest version, fixes alias supportnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35251 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-20network/iproute2: Bump version to 3.7.0nbd
Updated to latest stable version and added an upstream patch to handle a link failure Signed-off-by: Oliver Smith <olipro@8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa> [dgolle@allnet.de: refreshed patches] Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35250 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19uhttpd: update to a newer version, fixes chunked transfer on some POST requestsnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35249 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19kernel: remove 340-module_alloc_size_check.patch from linux 3.8, it is not ↵nbd
necessary anymore git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19uhttpd: switch to uhttpd2, it is now feature completenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35247 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: add profile and build image for the Tenda 3G300Mjuhosg
Factory image should be used to flash from original firmware. [juhosg: use the GENERIC_4M template] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: add user-space support for the Tenda 3G300Mjuhosg
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35245 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: add kernel support for the Tenda 3G300Mjuhosg
Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons and seven leds. Factory image should be used to flash from original firmware. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0juhosg
These targets need custom image names specified in the uImage header. MkImage accepts an optional 4th argument to do exactly that. Reuse the facility to generate factory images. Compile-tested, the generated files inspected with "file" utility. [juhosg: - keep the factory.bin images to avoid users confusion, - use GENERIC_4M template for the W306R V2.0 - update commit log] Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: allow to override image name/suffix in GENERIC_{4,8}M macrosjuhosg
Sysupgrade/KRuImage and BuildFirmware/Generic macros are changed as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19netifd: add a band-aid fix for the wifi setup vs. netifd init race by ↵jow
increasing the wait time to five seconds git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35240 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19busybox: add an upstream ntpd fix (#12841)jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35239 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: do not stop the build if some targets failjuhosg
This becomes crucial when you are using a generic profile to build an image larger than 4M, e.g. for w502u. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35238 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-18generic: rtl8366_smi: only assign pvid if no pvid was set yetjogo
Only assign a pvid if the current pvid is 0. Fixes using mixed tagged and untagged traffic on a port and the untagged vlan isn't the last one of which the port is a member. Tested on RTL8366S and RTL8367R. Fixes #8501. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35227 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-18ipv6-support: adapt UCI defaults to new orderingcyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-18base-files: use numerically prefixed uci-defaults namesjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35218 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-18all targets: use numerically prefixed uci-defaults file names to better ↵jow
control order of execution git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-18kernel: update linux 3.7 to 3.7.3juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35216 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-18odhcp6c: Fix parsing more than one DNS servercyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35215 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-29 06:26:26 +0000