summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-11-29remove common symbols from 3.6 configsjuhosg
The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34404 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-29remove common symbols from 3.3 configsjuhosg
The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-29kernel: update linux 3.6 to 3.6.8juhosg
Also refresh the affected patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34402 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-29[boot] uboot-kirkwood: build in $(BUILD_DIR)luka
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34401 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-28gettext-full: use shipped libxml for the host build, fixes lzma references ↵jow
from creeping in on certain distributions git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-27[ar7] use physmap-flash part_probe_typesflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34398 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-27[buildroot] image.mk: don't squash file permissions in JFFS2 imagesflorian
Currently we call mkfs.jffs2 --squash, which will change both file permissions and owners. If we have some file with suid bits, it will clear these bits. Thus it's enough to just squash file owners, by replacing that argument to --squash-uids. Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34397 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-27[brcm63xx] Fix typo in 96338GW power LED.florian
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-27[ar7] add AudioCodes AC495 SoCflorian
Found in the AudioCodes Tulip AC494 ATA. Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-27[mcs814x] do not call clk_put() on the timer clockflorian
We don't support disabling the clock, but this is actually what it would do. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34394 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-27[mcs814x] do not list specific board compatible stringsflorian
The general practice is to use the general SoC compatible string in both the DTS and the board specific .c file. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-27[mcs814x] remove unused variables from Makefile.bootflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34392 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-27trace-cmd: lazily evaluate extra plugins list, fixes stray build errors ↵jow
causing by missing operands to cp if the package was never built yet git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34390 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-26grub2: fix another case of gnulib failing under gnu libcjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34389 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25broadcom-wl: fix two problems when more then one wifi card is available.hauke
* The device should get a unique name at the beginning and not wl%d. * load the nvram just one time into the own buffer, also when there is more than one device. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34381 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25base-files: add support for the morse LED triggerjuhosg
Write "delay" and "message" options to their respective files, allowing Morse code message configuration through UCI. The delay (dit length) defaults to 150ms (about 8 words per minute, suitable for beginners). Signed-off-by: Petr Viktorin <encukou@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25brcm47xx: fix title of Bcm4705-wl profilehauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34378 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25brcm47xx: add profile for bcm4705 with wl driverhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34336 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25ramips: ramips_eth: use Kconfig definition to enable debugjuhosg
The Kconfig identifier to enable debugging in the driver was different from the actually used one. Fix that. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25ramips: add DIR-615 D userspace supportjuhosg
Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and Makefile changes to build images for this target. However, without the userspace bits a ramips machine can't use wifi as the necessary "eeprom" data is to be extracted by a hotplug script; also, sysupgrade support and default led configuration are missing. An IRC user reported these changes allowed him to use wifi on his hardware. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25kernel: add CONFIG_BCMA_POSSIBLE=y to generic config as it is set in most of ↵hauke
the target configs. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34330 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25brcm47xx: whitespace cleanupshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25[package] modules: remove obsolete comment (#12514)florian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25[package] iptables: fix typo in iptables musl patch after r34313florian
Thanks to Frank Meerkötter and Szabolcs Nagy for spotting the issue. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-24brcm47xx: fix cpu clock detection on ASUS WL-520gUhauke
The ASUS WL-520gU and some other similar Asus devices have a BCM5354 running at 200MHZ and not at 240 which is the default for this SoC. This fixes #4083. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-24brcm47xx: watchdog: deactivate NOWAYOUT.hauke
In the old configuration the SoC issued a reboot if the watchdog was killed also if it was kill with TERM and not KILL. This will fix #11724. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-24brcm47xx: update watchdog driverhauke
This watchdog driver should work with SoC having a PMU. This fixes #11720. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-24bcm63xx: Add a fixup for rt2x00 devices.jogo
This patch adds support for defining rt2x00 eeprom data. This eeprom data can be extracted from flash or loaded directly from a firmware file. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-24bcm63xx: Enable LED pin support for ath9k pci fixup.jogo
Some boards need specifying LED pin in order to get it working. For example, in board HW556 (Huawei HG556a) "led_pin" must be "2". By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1". Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-24bcm63xx: fix spi transfer handlingjogo
* Accept transfers without bits_per_word set. * Work around the inability of the hardware of keeping CS asserted. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23[toolchain] musl: backport an upstream fix for MIPS and termios constantsflorian
Fixes weird console behavior with a musl rootfs. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34318 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23[toolchain] musl: disable hardware FPU registers usageflorian
This was crashing applications, thanks to Rich Felker for the suggestion. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34317 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23ar71xx: set pad6 cfg for AR8327 on the AP136 boardjuhosg
Also override the pll_1000 value. Without these settings ethernet suffers from packet loss. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23generic: ar8216: set delay values for SGMII mode on AR8327juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23[buildroot] add preliminary support for muslflorian
Musl is an alternative C-library, see http://www.musl-libc.org for more infos. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23[package] iptables: add some musl portability fixesflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34313 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23[package] linux-atm: add portability fixesflorian
Spotted while building against musl libc. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34312 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23[package] busybox: fix arping applet building on muslflorian
musl-libc is more strict about missing includes. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34311 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23[package] netfid: fix build on muslflorian
AF_INET* is provided by sys/socket.h Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23[package] busybox: define musl specificities in platform.hflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23[package] base-files: use a natural mount syntaxflorian
Busybox built against musl-libc will choke on these otherwise, besides that it is more natural to use the filesystem type, then options, then name, then mountpoint. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23[package] busybox: change the date -k patch to be more portableflorian
Not all libcs have support for tm_gmtoff which is only available for BSD compatibility, and guarded with __USE_BSD defines, use __tm_gmtoff otherwise. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23[package] grub2: accept the linux-musl* tupleflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23[boot] uboot-lantiq: add new packageluka
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23rules.mk: fix misspelled config symbol introduced by r34300jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-22[boot] uboot-kirkwood: update to 2012.10luka
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-22imagebuilder: merge r25078 to align files/ handling with current buildrootjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-22rules.mk: append libc implementation to bin directory name if not using uClibcjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-22include: use $(DIR_SUFFIX) in $(KERNEL_BUILD_DIR) to separate ↵jow
build_dir/linux-* directories when building different libc implementations in the same buildroot git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-22package: kernel: make crypto kmods always visiblejogo
Don't hide crypo submodules unless crypo-core is selected. Fixes kmods depending on crypto modules being unselectable until crypto core is selected (like ext4 on 3.6 or mac80211). Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34298 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 05:42:18 +0000