summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-01-28[lantiq] refresh patchesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35355 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28[lantiq] Fix ARV7518 USBblogic
This patch correctly fixes USB on Lantiq ARV7518. There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/). Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35354 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28[lantiq] Add ath9k eeprom and pci fixup supportblogic
Add ath9k eeprom and pci fixup support (again) for linux 3.7. On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power. This patch only corrects checksum, the rest of the EEPROM isn't changed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28[lantiq] Add support for ARV4518PW R01 and rename R01A.blogic
There are two different versions of SMC7908A-ISP: R01 and R01A. R01 has an internal clock for PCI, meanwhile R01A has an external clock. This fixes: https://dev.openwrt.org/ticket/12884 Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35352 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28scripts: bundle-libraries.sh: support mixing 32bit and 64bit binariesjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28firewall: flush conntrack table after changing interface rulesjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35348 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28netifd: IPv6 sysctl, restart IPv6 in static mode to send RScyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35347 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28netifd: add SLAAC ipv6 value for static-protocyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35346 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28odhcp6c: work-around for proto-script to avoid loosing the default routecyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35345 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28base-files: remove IPv6-forwarding setting for all interfacescyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35344 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: disable CONFIG_CRYPTO_MANAGER2, it is not needednbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35342 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27brcm47xx: load pps_core and ptp before tg3 to make the interface available ↵hauke
for failsafe. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35341 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: b53: the b53 spi driver depends on spihauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35340 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: make usb2-pci depend on usb2 and not the other way aroundhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35339 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: activate input-matrixkmap for kernel 3.8hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35338 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: add ehci-platform.ko and ehci-pci.ko when build with kernel 3.8hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35337 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: add packages for pps and ptp, they are needed by tg3 in kernel 3.8hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35336 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8hauke
These attributes where removed with kernel 3.8 and are now causing compile errors. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27acx-mac80211: make it compile with kernel 3.8hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35334 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27acx-mac80211: refresh patcheshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35333 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27acx-mac80211: use same config options as mac80211 packagehauke
Problem was missing CONFIG_MAC80211_DEBUGFS in the acx-mac80211 build, which broke subsequently the ABI in struct ieee80211_ops. Defect manifested in failing ieee80211_alloc_hw() and maybe also in other strange behaviour before. I added CONFIG_CFG80211_DEBUGFS, CONFIG_MAC80211_DEBUGFS and the same also for CONFIG_MAC80211_MESH, just to be inline on how it's done currently in package/mac80211/Makefile. Thank you Oliver Winker git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27netfilter: add support for flushing conntrack via /procnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35330 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: clean up crypto kconfig options on 3.8nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8hauke
These attributes where removed with kernel 3.8 and are now causing compile errors. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: clean up crypto related kconfig optionsnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27ar71xx: disable support for unsupported mtd configuration, saves about 5K ↵nbd
kernel size after lzma git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: prevent cryptomgr from pulling in useless extra dependencies for ↵nbd
tests that are not run Reduces kernel size after LZMA by about 5k on MIPS git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-26brcm47xx: create image for Netgear WNDR3400 V1hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-26brcm47xx: add initial board detection codehauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-26brcm47xx: add gpio to irq function againhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-26kernel: use -ffunction-sections, -fdata-sections and --gc-sections on mipsnbd
in combination with kernel symbol export stripping this significantly reduces the kernel image size git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-26kernel: fix module export strippingnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35319 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-24kernel: update linux 3.7 to 3.7.4juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35318 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-24kernel: refresh 3.8 patchesflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35317 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-24mvebu: update to 3.8-rc4florian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-24kernel: add missing config options for 3.8hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-24brcm47xx: change generic profileshauke
The default profile now contains Ethernet drivers for all the types found on supported boards. There are other profiles for each Ethernet driver. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23kernel: remove the cisco sip phone patch for 3.7 and 3.8 as wellnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23ar71xx: sync kernel sizes where possible to fix images for some devices (#12874)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23bcm63xx: switch to b53 and swconfigjogo
Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23bcm63xx: expose the internal switch to b53jogo
Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23generic: add b53 swconfig switch driverjogo
Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports switches connected through MDIO, SPI or memory mapped registers, and supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch chips. Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23bcm63xx: move bcm63xx-spi into the kerneljogo
The SPI driver is needed for supporting to boot from SPI flash on BCM6358 and BCM6368, and for SPI connected switches. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23ipv6: remove empty directorycyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23ipv6-support: don't overwrite existing setting across reflashscyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22base-files: fix network_get_prefix6cyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22base-files: Set default value for IPv6 forwardingcyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22netifd: update to latest version, adds another fix for interface aliasesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35297 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22netifd: Fix a segfault when globals.ula_prefix is emptycyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35296 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22uhttpd: always turn on TLS support, include ustream-ssl as a build dependencynbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35295 3c298f89-4303-0410-b956-a3cf2f4a3e73