summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-10firewall: small improvements in nat reflectionjow
- do not insert duplicate rules when setting up reflection to a zone containing multiple interfaces - set up reflection for any protocol, not just TCP and UDP git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38361 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-10Incorrect checkout of git submodulesjow
When checking out git packages, buildroot doesn't seem to track the revisions correctly of any submodules referenced by that project. As a result, the submodule stays at whatever revision was referenced by the head of the master branch. Running a 'git submodule update' after the checkout fixes this problem. Signed-off-by: Owen Kirby <osk@exegin.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38359 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-10ppp: correct module loaded check in proto_pptp_setupjow
proto_pptp_setup is responsible for loading the required modules to establish a pptp connection to a foreign peer. The function checks whether all required modules are already loaded, before actually loading them. It seems that the filter being used to accomplish this, is not restrictive enough in some cases. For instance when pptp nat helper modules are present on a system, and already loaded before a pptp connection is enabled. Then the search filter (possibly) returns the following for module=pptp, where actually no matches are expected, resulting in the pptp.ko module not being loaded, thereby failing to establish the pptp connection. # module="pptp" ; grep "$module" /proc/modules nf_nat_pptp 1312 0 - Live 0x86ce7000 nf_conntrack_pptp 3072 1 nf_nat_pptp, Live 0x86cb9000 nf_nat_proto_gre 784 1 nf_nat_pptp, Live 0x86cba000 nf_conntrack_proto_gre 2368 1 nf_conntrack_pptp, Live 0x86cbf000 nf_nat 9792 13 nf_nat_rtsp,nf_nat_tftp,nf_nat_sip,nf_nat_pptp,nf_nat_h323,nf_nat_proto_gre,nf_nat_amanda,nf_nat_irc,nf_nat_ftp,ipt_REDIRECT,ipt_NETMAP,ipt_MASQUERADE,iptable_nat, Live 0x86ca8000 nf_conntrack 37264 31 nf_nat_rtsp,nf_conntrack_rtsp,nf_nat_tftp,nf_conntrack_tftp,nf_nat_snmp_basic,nf_conntrack_snmp,nf_nat_sip,nf_conntrack_sip,nf_nat_pptp,nf_conntrack_pptp,nf_nat_h323,nf_conntrack_h323,nf_conntrack_proto_gre,nf_nat_amanda,nf_conntrack_amanda,nf_conntrack_broadcast,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_conntrack_ftp,ipt_MASQUERADE,iptable_nat,nf_nat,xt_helper,xt_connmark,xt_connbytes,xt_conntrack,xt_CT,xt_NOTRACK,xt_state,nf_conntrack_ipv4, Live 0x86c90000 The search filter can be made more accurate/restrictive, by requiring the occurance of the exact name of the module at the beginning of a line in /proc/modules. # module="pptp" ; grep "^$module " /proc/modules pptp 13296 2 - Live 0x86e80000 Signed-off-by: Tijs Van Buggenhout <tvb@able.be> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38358 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-10dropbear: update to 2013.59 (released 4 october 2013)jow
- drop mirror www.mirrors.wiretapped.net (not working anymore) - drop patch 300-ipv6_addr_port_split.patch, included upstream - refresh patches - various upstream changes: http://matt.ucc.asn.au/dropbear/CHANGES Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38356 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-10x86: kvm: disable squashfs and jffs2 images by defaultjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38355 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-10ath9k: add some cleanups and minor fixesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38354 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-10kernel: add default config for ARM_ERRATA symbols for kernel 3.3hauke
Commit r37470 did not add a default conig for the ARM_ERRATA symbols for kernel 3.3. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38352 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-09[package] openvpn: rework initscript (fixes #14299)luka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38351 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-09procd: fix command handling in procd_add_instance()nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38350 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-09[package/libs/libpcap]: IPv6 support should depend on if we've enabled itkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-09ralink: fixes mpr a1/a2 network setupblogic
Signed-off-by: Suschman <suschman@gmx.net> Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38348 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-09mac80211: rtlwifi: Align private space in rtl_priv structhauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38346 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-08ralink: add support for the mt7530 eval boardblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38345 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-08ralink: add missing header file to mt7530 driverblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38344 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-08lantiq: fix up diag.shblogic
init no longer exists as a parameter Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38342 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-08kernel: dont rely on library modules to be depended onblogic
fixes https://dev.openwrt.org/ticket/14257 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38341 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-08kernel: remove debug code from module insert scriptblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38340 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-08hostapd: recognize 8021x as an authentication modenbd
Currently, in order to configure the authentication daemon in 8021x mode, we need to set wireless.@wifi-iface[0].encryption="wpa" Though it works it confuses folks as 8021x is using WEP encryption and not WPA. Therefore the terminology itself is confusing. This change adds 8021x as a recognized string for 8021x authentication. Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38339 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-08hostapd: add external registrar supportnbd
Setting wireless.@wifi-iface[N].ext_registrar=1 will enable UPNP advertising and add an external registrar to the interface this vif belongs to (br-lan if the vif is included in the LAN bridge). By enabling this we append upnp_iface=xxx to the hostapd config file. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38338 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-08hostapd: enable WPS2 support on hostapd-full.confignbd
Enable CONFIG_WPS2 for hostapd. This is required to support options like Virtual Push Button in WPS. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38337 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-08hostapd: fix hostapd RSN preauthentication PMKSA cachingnbd
In 2009 OpenWrt's hostapd config added an "auth_cache" boolean to be used to address a reported issue #12129 [0] on a forum [1]. The reported issue on the ticket is different that the one described on the forum. The commit was r33359. This change broke proper RSN preauthentication [2] [3] [4] expectations on hostapd's configuration for WPA2 and this in turn disabled PMKSA caching and Opportunistic Key Caching. This change: * Leaves the "auth_cache" to be used only for WPA networks for those looking to use this as a workaround to a reported issue but annotates a warning over its usage. * Separate "auth_cache" from WPA2 RSN preauthentication, leaving WPA2 RSN preauthentication to enabled only with "rsn_preauth" with the expected and recommended settings. * Adds a new WPA2 RSN preauthentication "rsn_preauth_testing" to be used when evaluating funcionality for WPA2 RSN preauthentication with the expected and recommended settings with the only difference so far with what should be enabled by default to disable Opportunistic Key Caching. Disabling the PMKSA cache should mean the STA could not roam off and back onto the AP that had PMKSA caching disabled and would require a full authentication cycle. This fixes this for WPA2 networks with RSN preauthentication enabled. This change should be applied to AA as well as trunk. TL DR; The issue described on the forum has to do with failure of a STA being able to try to authenticate again with the AP if it failed its first try. This may have been an issue with hostapd in 2009 but as per some tests I cannot reproduce this today on a WPA2 network. The issue described on the ticket alludes to a security issue with the design of using a Radius server to authenticate to an AP. The issue vaguely alludes to the circumstances of zapping a user, deleting their authentication credentials to log in to the network, and that if RSN preauthentication is enabled with PMKSA caching that the user that was zapped would still be able to authenticate. Lets treat these as separate issues. I cannot reproduce the first issue reported on the forums of not being able to authenticate anymore on a WPA2 network. The issue reported on the ticket modified WPA2 RSN preauthentication by adding two fields to the hostapd configuration if auth_cache was enabled: * disable_pmksa_caching=1 * okc=0 The first one disables PMKSA authentication cache. The second one disables Opportunistic Key Caching. The issue reported on the ticket was fixed by implementing a workaround in hostapd's configuration. Disabling PMKSA caching breaks proper use of WPA2 RSN pre authentication. The usage of disable_pmksa_caching=1 prevents hostapd from adding PMKSA entries into its cache when a successful 802.1x authentication occurs. In practice RSN preauthentication would trigger a STA to perform authentication with other APs on the same SSID, it would then have its own supplicant PMKSA cache held. If a STA roams between one AP to another no new authenitcation would need to be performed as the new AP would already have authenticated the STA. The purpose of the PMKSA cache on the AP side would be for the AP to use the same PMKID for a STA when the STA roams off onto another BSSID and later comes back to it. Disabling Opportunistic Key Caching could help the reported issue as well but its not the correct place to address this. Opportunistic Key Caching enables an AP with different interfaces to share the PMKSA cache. Its a technical enhancement and disabling it would be useful to let a testing suite properly test for RSN preauthentication given that otherwise Opportunistic Key Caching would enable an interface being tested to derive its own derive the PMKSA entry. In production though okc=1 should be enabled to help with RSN preauthentication. The real fix for this particular issue outside of the scope of hostapd's configuration and it should not be dealt with as a workaround to its configuration and breaking expected RSN preauthentication and technical optimizations. Revert this change and enable users to pick and choose to enable or disable disable_pmksa_caching and okc expecting them to instead have read clearly more what these do. As for the core issure ported, the correct place to fix this is to enable a sort of messaging between the RADIUS server and its peers so that if caching for authentication is enabled that cache can be cleared upon user credential updates. Updating a user password (not just zapping a user) is another possible issue that would need to be resolved here. Another part of the solution might be to reduce the cache timing to account for any systematic limitations (RADIUS server not able to ask peers to clear cache might be one). [0] https://dev.openwrt.org/changeset/33359 [1] https://forum.openwrt.org/viewtopic.php?id=19596 [2] http://wireless.kernel.org/en/users/Documentation/hostapd#IEEE_802.11i.2FRSN.2FWPA2_pre-authentication [3] http://wireless.kernel.org/en/users/Documentation/wpa_supplicant#RSN_preauthentication [4] http://wiki.openwrt.org/doc/recipes/rsn_preauthentication Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38336 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-08hostapd: Add WPS unconfigured & WPS pin method supportnbd
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-08hostapd: Add eap_reauth_period config optionnbd
This adds the eap_reauth_period to be used for modifying the RADIUS server reauthentication authentication period, a parameter that gets passed directly to the hostapd configuration file. Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38334 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07mac80211: wl12xx: build them againhauke
WL_TI is bool but was set to =m, which deactivated it. Now it is set to =y and should be activated in the config so the wl12xx driver gets build. This closes #14212. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38333 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07mac80211: brcmfmac: BRCMFMAC_USB was not set in confighauke
Somehow BRCMFMAC_USB was not set in the build and brcmfmac.ko did not had usb support. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07[package] openvpn: switch to new procd init script styleluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07[package] polarssl: update to 1.2.9luka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38330 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07lantiq: fix ltq_ptm compileblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07lantiq: experia v8 fixesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07lantiq: fix fritz3370 dts fileblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07lantiq: fix fritz image generationblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07lantiq: fix eva partition split for squashfsblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07ralink: fix asiarf image generationblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07ralink: split mt7530 driver out of the gsw driverblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07ralink: build recovery images for dcs930 ip camblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07ralink: DIR610A1 Fix remaining issuesblogic
This patch fixes: - Ethernet and Wireless LEDs - Wireless MAC Address - Remove whitespaces from dts file Signed-off-by: Flavio Silveira <fggs@terra.com.br> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07ralink: MT7620 eval board pinmux fixesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07ralink: make cevt systick selectable via kconfigblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38319 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07ralink: fix mt7620a pinmuxblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38318 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07tools: add tool to generate dcs93xl imagesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38317 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07odhcp6c: improve server selection, introduce "forceprefix" optioncyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07[package] iproute2: update to 3.11luka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38313 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07brcm47xx: Cocci spatch "noderef"hauke
sizeof when applied to a pointer typed expression gives the size of the pointer. Found by coccinelle spatch "misc/noderef.cocci" Signed-off-by: Thomas Meyer <thomas@m3y3r.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38312 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07brcm47xx: move clock detection patcheshauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38311 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-06brcm47xx: move and rename nvram gpio patchhauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-06brcm47xx: update early printk patcheshauke
Early printk was disabled because it caused hangs on some devices, the old patches were using the CFE console now we use the normal serial console, it is at a constant address. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-06brcm47xx: update board detection patcheshauke
Add patches like they are currently in the mainline mips tree and add some more pending patches for board detection. * Now the board name is shown under machine in /proc/cpuinfo. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-06kernel: b53: add switch name into printk when it fails.hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-06brcm47xx: b44: fix some problems with the phyhauke
* do not try initialize a unused phy * some improvements to the phylib patch * do not turn the phy off when mac is off Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-05ath9k: fix tx queueing issues after background scansnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38304 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 02:54:05 +0000