summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-08-04[kernel] gspca-sn9c20x.ko was not insmod'ed due to typoblogic
fixes #11973 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32991 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-03[atheros] wrt55agv2-spidevs needs <linux/modules.h>blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-03[lantiq] cleanup patchesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32953 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02[mcs814x] nuport-mac: properly protect the phy interrupt handlerflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02[bufferbloat] Codel: avoid a nul rec_inv_sqrtblogic
One condition before codel_Newton_step() was not good if we never left the dropping state for a flow. As a result rec_inv_sqrt was 0, instead of the ~0 initial value. codel control law was then set to a very aggressive mode, dropping many packets before reaching 'target' and recovering from this problem. Brought over from 3.5-stable Signed-off-by: Dave Taht <dave.taht@bufferbloat.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02[lantiq] fixes i2c clock enableblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02ar71xx: simplify misc IRQ handlingjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32948 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02ar71xx: fix AR934X_EHCI_SIZEjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32947 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043NDjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32946 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02ar71xx: image: allow to use board specific code in the lzma-loaderjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02ar71xx: init switch hw_reset on the TL-WR1043ND boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32944 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02generic: rtl836x: add hw_reset field to struct rtl8366_smijuhosg
It will be used to start/stop the switch if that is supported by the given board. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32943 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02generic: rtl8366_smi: use __rtl8366_smi_cleanup instead of gpio_free callsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32942 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01[mcs814x] add missing netmask to the network configflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32941 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01[mcs814x] assume the link is up and full-duplex by defaultflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32940 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01[mcs814x] add a default and suitable network config fileflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01ar71xx: ew-dorin: added router firmware generationjuhosg
[juhosg: remove dead code] Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01ar71xx: ew-dorin: added USB supportjuhosg
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32933 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01ar71xx: Buffalo WLAE-AG300N wireless led patchjuhosg
Here is the uci-defaults version of the led support for the Buffalo WLAE-AG300N. Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32932 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01ar71xx: Buffalo WLAE-AG300N initial supportjuhosg
The patch set for Buffalo WLAE-AG300N initial support. There is another patch for wireless led support that is posted separately. Note on serial console: This unit has buffalo standard 4 pin console, but the unit may not power on if some console apparatus is connected. This is probably due to some electronic interaction between the unit's electronic power switch circuit and the serial console apparatus. If this happens, it is required to power on the unit without the console, then quickly (re-)attach it. [juhosg: fix coding style] Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01[mcs814x] resync defconfig enable XZ compressionflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32930 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01[package] uclibc++: update to 0.2.4florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32929 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01[package] uclibc++: stage g++-uc wrappers in $(TOOLCHAIN_DIR)florian
Since we are overriding TARGET_CXX with the g++-uc wrapper when we use cmake it expects to find g++-uc in the TOOLCHAIN_DIR. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32928 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31[mcs814x] properly generate squashfs, jffs2 and initramfs images and kernelsflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32927 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31[kernel] disable crashlog on ARM platforms for the momentflorian
It is currently badly broken on ARM, until fixed, disable it git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32926 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31[lantiq] add lantiq svip supportblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31bcm63xx: Add nb6 support (BCM6362 SoC base boards)jogo
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com> Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> [jonas.gorski@gmail.com: add network config for nb6, make switch fix a platform patch] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31bcm63xx: add basic bcm6362 supportjogo
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31bcm63xx: enable usb for bcm6328jogo
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31bcm63xx: update enetswitch driverjogo
Update enetswith driver with latest fixes and additions. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31bcm63xx: reorder patchesjogo
Fix the order and names of patches. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-29[at91] move i2c module to target modules.mkflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-29[package] partially revert r32855florian
Too many modules were removed, while only the octeon module was meant to be removed, fix that. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32909 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-29[omap24xx] resync configflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-29[omap24xx] use the same description as other omap platforms (without the dash)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32907 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-29[kernel] refresh pwm patchblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-29[acx-mac80211] dont build on arm as kernel headers are missing/have a ↵blogic
different layout git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-28[include] fix up scons vs ccacheblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32902 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-28[kernel] clean up pwm patches and driversblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32901 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-28[kernel] add config option CONFIG_I2C_MV64XXX to fix kirkwood buildhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-27[realview] resync configflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-27[brcm63xx] fix DVA-G3810BN image generationflorian
Attached patch fixes a typo in the image Makefile, and overrides the board name for DVA-G3810BN to set the correct board properties Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-27[brcm63xx] add D-link DVA-G3810BN-TL-1 supportflorian
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-27[brcm63xx] Add CT6376-1 board supportflorian
Added CT6373 devices instead of using NB4's devices, as Florian suggested. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-27[package] base-files: fix detection of standalone lddflorian
When standalone ldd is selected in config the binary is installed in /usr/bin/ldd. Signed-off-by: Michael Heimpold <mhei@heimpold.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-27[brcm63xx] Add brcmsmac profileflorian
Add brcmsmac profile (kmod-brcmsmac + wpad-mini). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-27[mac80211] mae brcmutil depend on PCI and USB. This broke ar7 fullbuildsblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-26[atheros] Add leds back after migration to sysfsblogic
atheros trunk moved to full sysfs gpiolib, but the leds were forgotten. This restores the wlan led that was missing after switching from backfire to trunk. Signed-off-by: Karl Palsson <karlp@remake.is> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-26[brcm2708] add more missing config symbolsflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-26[generic] add more USB-related config symbolsflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32883 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-26 20:20:01 +0000