summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-05kernel: fix DMA error when BCM4331 is connected to BCM4706hauke
The BCM4331 supports a PCIe max request size of 512 bytes and uses that, but the PCIe controller in the BCM4706 just supports 128 Bytes and that causes a DMA error for packages bigger than 126 bytes. This fixes the problem by setting the BCM4331 also to 128 Bytes. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05ramips: re-implement PCI muxjuhosg
Parallel flash access on RT3662/RT3883 based devices is broken without that. It was fixed already some time ago, but that change seems lost somewhere. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05ramips: allow to build Seama firmware images with arbitrary sizejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05ar71xx: add usb modules to dir 505 profileblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05octeon: add a few missing symbols to the kernel config fileblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37705 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05lantiq: several a803 related fixesblogic
based on work from Matti Laasko that he posted in the wiki Signed-off-by: John Crispin <blogic@openwrt.or git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05ar71xx: add support for dir 505 a1blogic
this patch is based on ... -> https://forum.openwrt.org/viewtopic.php?pid=179902#p179902 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05gpio-button-hotplug: debounce the initial button state, the first reads at ↵nbd
boot time might be wrong Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37702 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05ubus: fix typonbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05ubus: change section/category to base, libsnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05mac80211: fix rt2x00 dependencyjuhosg
The current dependency prevents building of the rt2800{pci,usb} drivers for RT3883. Change the dependency to fix this. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05mac80211: rt2x00: fix LED polarity patchjuhosg
The patch causes compiler warning ... <...>/drivers/net/wireless/rt2x00/rt2800lib.c: In function 'rt2800_init_eeprom': <...>/drivers/net/wireless/rt2x00/rt2800lib.c:5971:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] ... and runtime errors on PCI/USB devices: [ 11.810000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected [ 11.830000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected [ 11.880000] rt2x00mmio_regbusy_read() Indirect register access failed: offset=0x00007010, value=0x01ff0001 [ 12.080000] usb 1-1: reset high-speed USB device number 2 using ehci-platform [ 12.250000] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detecte [ 12.300000] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected [ 12.350000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x1a93b47 [ 12.430000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47 [ 12.480000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05mac80211: enable RT{33,35,53,55}XX chip support in rt2800usbjuhosg
Closes #13951. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37697 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05ar71xx: fix tl-wa901nd buttons codejuhosg
This patch fixes the code of the buttons for TP-Link WA901ND. Signed-off-by: Rocco Folino <lordzen@autistici.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37696 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05ar71xx: ubnt unifi outdoor register gpio buttonjuhosg
This patch register the gpio buttons for the Ubiquiti UniFi Outdoor. Signed-off-by: Rocco Folino <lordzen@autistici.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04x86: change /dev/console to tty to fix job controlblogic
Job control is turned off because it cannot obtain controlling terminal on /dev/console, so it is impossible to do any job control operation behind real x86 device (keyboard+monitor or virtualized). This patch switches /dev/console to tty devices for ash on x86 generic target. Signed-off-by: Jiri Slachta <slachta@cesnet.cz> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37693 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04mac80211: add rtlwifi driversjogo
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com> [jogo@openwrt.org: add missing DRIVER_11N_SUPPORT select, add missing usb dependencies, backport upstream fixes for Kconfig issues] Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04imx6: sync usb chipidea with upstreamluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37686 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04generic: make the module reloc pacth work on mips64blogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37685 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04octeon: add support for the octeon mips64 SoCblogic
This is the SoC used be the ESR Lite made by ubnt.com Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04imx6: remove sdma binaryluka
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04busybox: rename ntp init script back to sysntpd (#13920)jow
Renaming the init script to ntp broke LuCI time sync functionality and collides with other ntp packages git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04brcm47xx: change board detection for some Asus deviceshauke
This closes #13316 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04build: process transitive dependencies after local dependenciesnbd
This improves duplicate dependency detection Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04build: suppress conditional dependencies if there are unconditional ↵nbd
dependencies on the same symbol Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37678 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04kernel: kmod-appletalk: fix dependencieshauke
When CONFIG_LLC gets build as a module, also p8022.ko and psnap.ko are getting build as a module. kmod-appletalk depends on llc.ko and psnap.ko, but at least psnap.ko,was not packed. On most systems CONFIG_LLC will be build into the kernel so this problem does not show up. This fixes the missing dependency of kmod-appletalk on psnap.ko Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04kernel: do not build FW_LOADER as a module.hauke
CONFIG_FW_LOADER=y is set in the generic config and our packages in packages/kernel/linux are depending on it to be compiled into the kernel. This fixes some dependency problem where kmod-r8169 misses firmware_class.ko. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04ubus: update to latest versionnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37671 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03broadcom-diag: show error message in case something goes wrong with gpio irqhauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37668 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03broadcom-diag: add gpio config for Asus RT-N66Uhauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37667 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03broadcom-diag: add gpio config for Linksys E4200v1hauke
GPIO for Linksys E4200v1, tested and works. This closes #13454 and #13894 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03gpio-button-hotplug: cleanup, fix compiler warningnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37665 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03gpio-button-hotplug: fix active_low handling, possibly broken in r37643nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37664 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03imx23: add missing DTS config for lradcwigyori
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37663 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03imx23: add hw crypto (dcp) supportwigyori
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37662 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03kernel: only add v4l2-compat-ioctl32 when CONFIG_COMPAT is sethauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37661 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02kernel: add missing config optionshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02kernel: add missing module to video-core for kernel < 3.6hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02kernel: fix usb-chipidea compilation with kernel <= 3.9hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02kernel: add missing config optionhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02kernel: add missing config optionhauke
brcm47xx does not use CONFIG_B53_SPI_DRIVER, but it could be selected if spi is build as a module Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37656 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02broadcom-diag: add support for the ASUS RT-N12hauke
This adds button and led info, which I determined by manually poking the gpio values. Signed-off-by: Josh Stone <cuviper@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02broadcom-diag: increase version numberhauke
There are some changes in there and this should be rebuild. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02mac80211: backport a few upstream fixesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01kernel: ocf: add missing kernel dependenciesjogo
OCF_CRYPTOSOFT uses both symbols form crypto_hash and crypto_blkcipher, so let it select these through kernel config. Fixes the following build error: ERROR: "crypto_alloc_ahash" [crypto/ocf/cryptosoft.ko] undefined! ERROR: "crypto_ahash_digest" [crypto/ocf/cryptosoft.ko] undefined! ERROR: "crypto_ahash_setkey" [crypto/ocf/cryptosoft.ko] undefined! make[6]: *** [__modpost] Error 1 make[5]: *** [modules] Error 2 Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01kernel: load libphy before tg3hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01brcm47xx: switch to kernel 3.10.4hauke
This uses a new switch driver. The old ADMTEK Adm6996 switch is not supported any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37650 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01brcm47xx: use lib phy when tg3 is in usehauke
This is untested, but probably needed to make it work with the phy lib switch driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01kernel: b53: use devm_gpio_request_one() to request gpiohauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01brcm47xx: improve detection of Linksys WRTSL54GShauke
This closes #13319 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37647 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 04:51:49 +0000