summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-02-16[x86] Make gzipping of images configurable via menuconfigacinonyx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16package/mac80211: fix a possible NULL pointer dereference in rt2x00juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30586 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16ar71xx: remove duplicated define from the D-Link profilejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30577 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16ramips: select HW_HAS_PCI on per-board basisjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16ramips: rt3883: remove a stray character from rt3883.hjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16ramips: rt288x: don't register the PCI controller on each boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16ramips: raeth: separate ring allocation and setupjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16generic: add SND_PPC symboljuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30572 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16[ar71xx] Add Ubiquiti UniFi Profile; It's an AP without USB so don't include ↵cshore
USB drivers by default git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16[ar71xx] d-link: Add DIR-601 Profile Definition; It needs different factory ↵cshore
images than DIR-600 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16[ar71xx] Fix partitions for Cameo-based boards; kernel 3.2 is biggercshore
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16[ar71xx] image: For Cameo-based board fix adding mtd layout to kernel ↵cshore
commandline) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15linux 3.2: missing generic symbolsjow
These symbols are dependent on CONFIG_PCI being enabled. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15[package] kernel: fix KCONFIG depends of kmod-md modulesjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15ramips: rt288x: fix PCI resource conflictjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30563 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15[ramips] correct PCI IO/Mem resource swappingflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15[ramips] add Ralink V11ST-FE board supportflorian
This board is equipped with: - 4MB of NOR Flash - 32MB of SDRAM - IC+ IP175C switch - one Mini-PCI slot git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15build: add -Wno-error=unused-but-set-variable to cflags for gcc 4.6 and ↵nbd
newer to avoid stupid -Werror related package breakage git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15ramips: raeth: add a helper function for skb allocationjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15ramips: raeth: use netdev_alloc_skbjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor ↵juhosg
structures This helps GCC to generare more efficient code. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15ramips: raeth: use 're' instead of 'priv' everywherejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30552 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15ath9k: prevent writes to const data on AR9160nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30551 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15ramips: raeth: force link down in ramips_phy_stopjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15ramips: raeth: serialize ramips_link_adjust callsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15ramips: raeth: add PHYLIB supportjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[package] gdb: use an updated 6.8a tarballflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30543 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[kernel] add missing autoload shortcut to crypto modules for btrfsblogic
Currently the btrfs module (and other fs modules) is loaded before other modules to provide early extroot compatibility. This will fail for btrfs however, because the dependencies crypto-core and crypto-hash are missing. This patch makes them available for early loading too. Signed-off-by: Jan Willies <jan@willies.info> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30542 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14linux-atm: update solos-pci driver to upstreamblogic
Fixes for the solos-pci driver. - Corrects calculation of headroom for padding. - Removes pointless debug messages. - Expose Bis A and Bis M annex capabilities. - Expose hardware revision. Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14linux-atm: headroom/padding fixesblogic
Submitted upstream to netdev by Chas Williams on linux-atm. Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14mac80211: Allow preamble configurationblogic
Add a new wireless config parameter short_preamble=0|1 to enable usage of short preambles. Default is to only allow long preambles as before. Even if short_preamble is set to 1 hostapd will take care that short preambles are disabled as soon as a STA associates that cannot handle short preambles. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30539 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14Add kernel module package for SLIPblogic
This patch adds support for a kernel module package for SLIP. We needed it forusing tunslip6 from Contiki OS for 6LoWPAN communications. Signed-off-by: Markus Becker <mab@comnets.uni-bremen.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] generate uboot environment data in targetblogic
With this patch it is possible to generate uboot environment config file inside lantiq target. Currently it is only supporting GIGASX76X board. uboot environment config is used by fw_printenv fw_setenv tools. Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30537 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14Update bridge-utils to the last upstream version 1.5.blogic
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30536 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[OpenWrt-Devel] update e2fsprogsblogic
Update e2fsprogs to the last upstream version 1.42. blkid works fine without 100_add_missing_libpthread_for_blkid.patch. Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] fix compile error in previous commitblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] Support booting the Speedport W502V using BRN-BOOT.blogic
While the disadvantage is less available flash space, it's easy and safe to flash without opening the device. Going back to the original firmware is also possible. This patch add two firmware utilities, mkbrncmdline and mkbrnboot. mkbrncmdline patches the uncompressed kernel so the registeres a0 to a3 are initialized and the memory size is passed in. mkbrnboot takes the lzma compressed kernel and squashfs images and creates a firmware image that can be flashed using the BRN-BOOT recovery kernel, which is booted by holding both buttons when powering up the device and will listen on http://192.168.2.1. The firmware file from bin/lantiq/ to use is openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage The BRN-BOOT recovery kernel does size-check the image, so if it's too big to fit into flash it will complain accordingly. A second patch is needed to make the wired network interface work since there is no u-boot to pre-initialise it. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[pjsip] drop obselete Config.in fileblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14ramips: extract eeprom for the PCIe wlan module on the RT-N56Ujuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30529 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14ramips: rt3883: enable PCI on the RT-N56U boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14ramips: rt3883: add PCI supportjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14ramips: rt3883: sync 2.6.39 configjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14ramips: use SoC specific irq.hjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] fixes irq locking in ethernet driverblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30522 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] fixes gpio_export patchblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[pjsip] bump to 1.12, merge improved lantiq aud_dev driverblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30520 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] add a simple sip clientblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30519 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[ltq-dsl] add annex selection support to ltq_dsl packageblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30518 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30508 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13ar71xx: add model detection for TL-WR842N/NDjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30507 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-30 21:38:18 +0000