summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-07-14ar71xx: update to 3.10.1nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14mac80211: b43: load b43 on core rev 17 and 18.hauke
This is now controlled by a module parameter and the default configuration depends on brcmsmac being installed. This patch causes b43 to take core rev 17 and 18 always by default. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14mac80211: b43: activate LP-Phy support every timehauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14brcm47xx: use b53 phy driver for the switch in kernel 3.10hauke
This makes it possible to use swconfig to controll the switch. This was tested with devices using b43 and bgmac. This was not tested on devices using tg3. This does not support the adm switch used in some very old devices. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: use uimage split for WHR-HP-G300Nnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: use uimage split for dlrtdevnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: use uimage split for Allnet devicesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: use uimage split for Cameo devicesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: use uimage split for DIR-825B1nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: use uimage split for Embedded Wireless Dorinnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37298 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: use uimage split for Ubiquiti XM devicesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37297 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: increase kernel size for wndr3700 based devicesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37296 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: use uimage split for WZR-HP-G300NH2nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhpnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: use uimage split for WZR-HP-G300NHnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: use uimage split for WZR-HP-G450Hnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37292 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: enable uimage split and use it for carambola2nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37291 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: remove linux 3.8nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: move the watchdog driver to the kernelnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: set linux 3.10 as defaultnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14brcm47xx: add initial support for kernel 3.10hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14brcm47xx: fix switch handlinghauke
This fixes some problems with the switch handling * It now send the messages again to indicate a button for failsafe mode should be pressed * it does not leak packages between wan and lan any more * the switch works again in normal mode The Ethernet connection has to be up when the switch driver switch-robo is insmoded therefor we just do it again. Explicitly set enable_vlan to prevent leaking packages. This should close #13869, #13868 and #13716 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14kernel: disable the yaffs2 /proc code to make it compile on linux 3.10 (#13848)nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14brcm47xx: do not load the kernel modules needed for Ethernet manuallyhauke
add the boot flag to make the kernel modules needed for Ethernet and diag load on startup. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37284 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14kernel: implement automatic rootfs split from the firmware partition in ↵nbd
linux 3.10 (disabled by default) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37283 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14kernel/base-files: clean up old code related to refreshing mtd partitions, ↵nbd
it is no longer used anywhere Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37282 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14brcm47xx: do not change nvram without user interactionhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37281 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14broadcom-diag: make it work with kernel 3.10hauke
In kernel 3.10 the proc interface changed, this patch adds the changes needed for the new interface. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37280 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14broadcom-diag: check the correct value for not null.hauke
This also fixes a compile warning. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14broadcom-diag: reoder some parts.hauke
This was done to reduce the number of forward declaration needed. This does not contain any real change in the code. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14busybox: disable features marked as broken (#13782)nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13kernel: refresh patches for kernel 3.8.13hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13kernel: update to kernel 3.10.1 and refresh patcheshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13kernel: update to kernel 3.9.10 and refresh patcheshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13ar71xx: fix ar933x watchdog clock (#13866)nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13brcm47xx: proc gets mounted without this patchhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13brcm47xx: remove obsolete hotplug stuffhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13mac80211: tweak mac address allocationnbd
Apparently there are some broken devices out there that have the local bit already set in the factory MAC address. Move the | 0x2 over to the other side of the xor operation to fix this without affecting devices with proper addresses. Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-12bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCshauke
This was only tested on a Netgear R6250, but it could also work on other devices when the correct images are generated. It is only possible to boot into a ram disk, no Ethernet, Wifi, flash, USB is supported. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-12mac80211: reconfigure in Build/Compile instead of Build/Configure to catch ↵nbd
kernel config changes Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37265 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-12mac80211: merge a fix for PS-Poll handling, refresh patchesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-12mac80211: remove bogus module params from compat.konbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37263 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11ar71xx: add carambola2 supportblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11procd: update to latest git revisionblogic
this fixes a regression in the watchdog init code Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37259 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11lantiq: revert 36778 as it breaks irq assignment to pci devicesblogic
Reported-by: Matti Laakso Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11procd: make the log port default to 514 if none is specifiedblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11kernel: move codel from kmod-sched-core to kmod-sched, it is rarely needednbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11kernel: add a patch that reduces module size by removing non-essential ↵nbd
information (reduces default rootfs size by ~5k after lzma) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11kernel: make libsas depend on x86nbd
It is only used by one driver that already depends on x86. Disabling it prevents a few kilobytes of bloat from leaking into all targets via CONFIG_BLK_DEV_BSG Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11kernel: disable CONFIG_RD_LZMA by default, it will be selected when actually ↵nbd
needed Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37253 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 07:41:57 +0000