diff options
Diffstat (limited to 'toolchain/uClibc/patches-0.9.32/920-remove_sub-arch_variants.patch')
| -rw-r--r-- | toolchain/uClibc/patches-0.9.32/920-remove_sub-arch_variants.patch | 182 |
1 files changed, 0 insertions, 182 deletions
diff --git a/toolchain/uClibc/patches-0.9.32/920-remove_sub-arch_variants.patch b/toolchain/uClibc/patches-0.9.32/920-remove_sub-arch_variants.patch deleted file mode 100644 index e8a97c4f8f..0000000000 --- a/toolchain/uClibc/patches-0.9.32/920-remove_sub-arch_variants.patch +++ /dev/null @@ -1,182 +0,0 @@ -Rely on the compiler to be correctly set up to generate -appropriate code for the target variant. - -This exposes the Thumb option, as it is no longer auto-selected. -The "Use BX" no longer depends on supported CPU to be selected, -so it now defaults to 'n' as it shall work by default on CPUs -that do not have BX. - -Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> -Cc: Khem Raj <raj.khem@gmail.com> -Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> -Cc: Carmelo AMOROSO <carmelo.amoroso@st.com> ---- - Rules.mak | 19 ------- - extra/Configs/Config.arm | 125 ++-------------------------------------------- - 2 files changed, 5 insertions(+), 139 deletions(-) - ---- a/Rules.mak -+++ b/Rules.mak -@@ -335,25 +335,6 @@ endif - ifeq ($(TARGET_ARCH),arm) - CPU_CFLAGS-$(ARCH_LITTLE_ENDIAN)+=-mlittle-endian - CPU_CFLAGS-$(ARCH_BIG_ENDIAN)+=-mbig-endian -- CPU_CFLAGS-$(CONFIG_GENERIC_ARM)+= -- CPU_CFLAGS-$(CONFIG_ARM610)+=-mtune=arm610 -march=armv3 -- CPU_CFLAGS-$(CONFIG_ARM710)+=-mtune=arm710 -march=armv3 -- CPU_CFLAGS-$(CONFIG_ARM7TDMI)+=-mtune=arm7tdmi -march=armv4t -- CPU_CFLAGS-$(CONFIG_ARM720T)+=-mtune=arm7tdmi -march=armv4t -- CPU_CFLAGS-$(CONFIG_ARM920T)+=-mtune=arm9tdmi -march=armv4t -- CPU_CFLAGS-$(CONFIG_ARM922T)+=-mtune=arm9tdmi -march=armv4t -- CPU_CFLAGS-$(CONFIG_ARM926T)+=-mtune=arm9e -march=armv5te -- CPU_CFLAGS-$(CONFIG_ARM10T)+=-mtune=arm10tdmi -march=armv5t -- CPU_CFLAGS-$(CONFIG_ARM1136JF_S)+=-mtune=arm1136jf-s -march=armv6 -- CPU_CFLAGS-$(CONFIG_ARM1176JZ_S)+=-mtune=arm1176jz-s -march=armv6 -- CPU_CFLAGS-$(CONFIG_ARM1176JZF_S)+=-mtune=arm1176jzf-s -march=armv6 -- CPU_CFLAGS-$(CONFIG_ARM_SA110)+=-mtune=strongarm110 -march=armv4 -- CPU_CFLAGS-$(CONFIG_ARM_SA1100)+=-mtune=strongarm1100 -march=armv4 -- CPU_CFLAGS-$(CONFIG_ARM_XSCALE)+=$(call check_gcc,-mtune=xscale,-mtune=strongarm110) -- CPU_CFLAGS-$(CONFIG_ARM_XSCALE)+=-march=armv5te -Wa,-mcpu=xscale -- CPU_CFLAGS-$(CONFIG_ARM_IWMMXT)+=-march=iwmmxt -Wa,-mcpu=iwmmxt -mabi=iwmmxt -- CPU_CFLAGS-$(CONFIG_ARM_CORTEX_M3)+=-mcpu=cortex-m3 -- CPU_CFLAGS-$(CONFIG_ARM_CORTEX_M1)+=-mcpu=cortex-m1 - CPU_CFLAGS-$(COMPILE_IN_THUMB_MODE)+=-mthumb - endif - ---- a/extra/Configs/Config.arm -+++ b/extra/Configs/Config.arm -@@ -30,129 +30,14 @@ config CONFIG_ARM_EABI - - endchoice - --choice -- prompt "Target Processor Type" -- default CONFIG_GENERIC_ARM -- help -- This is the processor type of your CPU. This information is used for -- optimizing purposes. To build a library that will run on all ARMCPU -- types (albeit not optimally fast), you can specify "Generic Arm" here. -- If you pick anything other than "Generic Arm", there is no guarantee -- that uClibc will even run on anything other than the selected -- processor type. -- -- Here are the settings recommended for greatest speed: -- - "Generic Arm" select this if your compiler is already setup to -- optimize things properly, or if you want to run on pretty much -- everything, or you just don't much care. -- - For anything else, pick the ARM core type that best matches the -- cpu you will be using on your device. -- -- If you don't know what to do, choose "Generic Arm". -- --config CONFIG_GENERIC_ARM -- bool "Generic Arm" -- --config CONFIG_ARM610 -- bool "Arm 610" -- select ARCH_HAS_MMU -- --config CONFIG_ARM710 -- bool "Arm 710" -- select ARCH_HAS_MMU -- --config CONFIG_ARM7TDMI -- bool "Arm 7TDMI" -- select ARCH_HAS_NO_MMU -- select HAS_THUMB -- --config CONFIG_ARM720T -- bool "Arm 720T" -- select ARCH_HAS_MMU -- select HAS_THUMB -- --config CONFIG_ARM920T -- bool "Arm 920T" -- select ARCH_HAS_MMU -- select HAS_THUMB -- --config CONFIG_ARM922T -- bool "Arm 922T" -- select ARCH_HAS_MMU -- select HAS_THUMB -- --config CONFIG_ARM926T -- bool "Arm 926T" -- select ARCH_HAS_MMU -- select HAS_THUMB -- --config CONFIG_ARM10T -- bool "Arm 10T" -- select ARCH_HAS_MMU -- select HAS_THUMB -- --config CONFIG_ARM1136JF_S -- bool "Arm 1136JF-S" -- select ARCH_HAS_MMU -- select HAS_THUMB -- --config CONFIG_ARM1176JZ_S -- bool "Arm 1176JZ-S" -- select ARCH_HAS_MMU -- select HAS_THUMB -- --config CONFIG_ARM1176JZF_S -- bool "Arm 1176JZF-S" -- select ARCH_HAS_MMU -- select HAS_THUMB -- --config CONFIG_ARM_CORTEX_M3 -- bool "Arm Cortex-M3" -- select ARCH_HAS_NO_MMU -- select FORCE_THUMB -- --config CONFIG_ARM_CORTEX_M1 -- bool "Arm Cortex-M1" -- select ARCH_HAS_NO_MMU -- select FORCE_THUMB -- --config CONFIG_ARM_SA110 -- bool "Intel StrongArm SA-110" -- select ARCH_HAS_MMU -- select HAS_THUMB -- --config CONFIG_ARM_SA1100 -- bool "Intel StrongArm SA-1100" -- select ARCH_HAS_MMU -- select HAS_THUMB -- --config CONFIG_ARM_XSCALE -- bool "Intel Xscale" -- select ARCH_HAS_MMU -- select HAS_THUMB -- --config CONFIG_ARM_IWMMXT -- bool "Intel Xscale With WMMX PXA27x" -- select ARCH_HAS_MMU -- select HAS_THUMB -- --endchoice -- --config HAS_THUMB -- bool -- --config FORCE_THUMB -- bool -- select HAS_THUMB -- select COMPILE_IN_THUMB_MODE -- select USE_BX -- - config COMPILE_IN_THUMB_MODE -- bool -+ bool "Build using Thumb mode" -+ select USE_BX -+ help -+ Say 'y' here to force building uClibc in thumb mode. -+ Say 'n' to use your compiler's default mode. - - config USE_BX - bool "Use BX in function return" -- default y -- depends on HAS_THUMB - help - Use BX instruction for THUMB aware architectures. |