summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/030-ixp4xx_fsg_board_support.patch498
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/110-pronghorn_metro_support.patch34
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/120-compex_support.patch38
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/130-wrt300nv2_support.patch38
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch30
5 files changed, 314 insertions, 324 deletions
diff --git a/target/linux/ixp4xx/patches-2.6.24/030-ixp4xx_fsg_board_support.patch b/target/linux/ixp4xx/patches-2.6.24/030-ixp4xx_fsg_board_support.patch
index c133034e50..be72505b8f 100644
--- a/target/linux/ixp4xx/patches-2.6.24/030-ixp4xx_fsg_board_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.24/030-ixp4xx_fsg_board_support.patch
@@ -1,7 +1,46 @@
-Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-pci.c
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig 2008-03-20 21:07:50.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig 2008-03-20 21:09:12.000000000 +1030
+@@ -125,6 +125,15 @@
+ depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
+ default y
+
++config MACH_FSG
++ bool
++ prompt "Freecom FSG-3"
++ select PCI
++ help
++ Say 'Y' here if you want your kernel to support Freecom's
++ FSG-3 device. For more information on this platform,
++ see http://www.nslu2-linux.org/wiki/FSG3/HomePage
++
+ #
+ # Certain registers and IRQs are only enabled if supporting IXP465 CPUs
+ #
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile 2008-03-20 21:07:50.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile 2008-03-20 21:09:12.000000000 +1030
+@@ -15,6 +15,7 @@
+ obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
+ obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
+ obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
++obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
+
+ obj-y += common.o
+
+@@ -28,5 +29,6 @@
+ obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
+ obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
+ obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
++obj-$(CONFIG_MACH_FSG) += fsg-setup.o
+
+ obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/fsg-pci.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-pci.c 2008-01-11 17:06:33.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/fsg-pci.c 2008-03-20 21:09:12.000000000 +1030
@@ -0,0 +1,71 @@
+/*
+ * arch/arch/mach-ixp4xx/fsg-pci.c
@@ -49,21 +88,21 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-pci.c
+ slot = slot - 11;
+
+ if (slot >= 1 && slot <= FSG_PCI_MAX_DEV &&
-+ pin >= 1 && pin <= FSG_PCI_IRQ_LINES) {
-+ irq = pci_irq_table[(slot - 1)];
-+ }
-+ printk("%s: Mapped slot %d pin %d to IRQ %d\n", __FUNCTION__,slot, pin, irq);
++ pin >= 1 && pin <= FSG_PCI_IRQ_LINES)
++ irq = pci_irq_table[(slot - 1)];
++ printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n",
++ __func__, slot, pin, irq);
+
-+ return irq;
++ return irq;
+}
+
+struct hw_pci fsg_pci __initdata = {
+ .nr_controllers = 1,
-+ .preinit = fsg_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = fsg_map_irq,
++ .preinit = fsg_pci_preinit,
++ .swizzle = pci_std_swizzle,
++ .setup = ixp4xx_setup,
++ .scan = ixp4xx_scan_bus,
++ .map_irq = fsg_map_irq,
+};
+
+int __init fsg_pci_init(void)
@@ -74,35 +113,42 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-pci.c
+}
+
+subsys_initcall(fsg_pci_init);
-Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-setup.c
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/fsg-setup.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-setup.c 2008-01-11 17:06:33.000000000 +1030
-@@ -0,0 +1,220 @@
++++ linux-2.6.24/arch/arm/mach-ixp4xx/fsg-setup.c 2008-03-20 21:09:12.000000000 +1030
+@@ -0,0 +1,275 @@
+/*
+ * arch/arm/mach-ixp4xx/fsg-setup.c
+ *
+ * FSG board-setup
+ *
-+ * based ixdp425-setup.c:
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
++ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
++ *
++ * based on ixdp425-setup.c:
++ * Copyright (C) 2003-2004 MontaVista Software, Inc.
++ * based on nslu2-power.c
++ * Copyright (C) 2005 Tower Technologies
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ */
+
-+#include <linux/kernel.h>
++#include <linux/if_ether.h>
++#include <linux/irq.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/leds.h>
+#include <linux/reboot.h>
++#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/io.h>
++#include <asm/gpio.h>
+
+static struct flash_platform_data fsg_flash_data = {
+ .map_name = "cfi_probe",
@@ -134,6 +180,12 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-setup.c
+ },
+};
+
++static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
++ {
++ I2C_BOARD_INFO("rtc-isl1208", 0x6f),
++ },
++};
++
+static struct resource fsg_uart_resources[] = {
+ {
+ .start = IXP4XX_UART1_BASE_PHYS,
@@ -184,27 +236,27 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-setup.c
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info fsg_plat_eth[] = {
-+ {
-+ .phy = 5,
-+ .rxq = 3,
++ {
++ .phy = 5,
++ .rxq = 3,
+ .txreadyq = 20,
-+ }, {
-+ .phy = 4,
-+ .rxq = 4,
++ }, {
++ .phy = 4,
++ .rxq = 4,
+ .txreadyq = 21,
-+ }
++ }
+};
+
+static struct platform_device fsg_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = fsg_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = fsg_plat_eth + 1,
-+ }
++ {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEB,
++ .dev.platform_data = fsg_plat_eth,
++ }, {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEC,
++ .dev.platform_data = fsg_plat_eth + 1,
++ }
+};
+
+static struct platform_device *fsg_devices[] __initdata = {
@@ -217,29 +269,50 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-setup.c
+
+static void fsg_power_off(void)
+{
-+ printk("Restarting system.\n");
++ printk(KERN_INFO "Restarting system.\n");
+ machine_restart(NULL);
+}
+
++static irqreturn_t fsg_power_handler(int irq, void *dev_id)
++{
++ /* Signal init to do the ctrlaltdel action, this will bypass init if
++ * it hasn't started and do a kernel_restart.
++ */
++ ctrl_alt_del();
++
++ return IRQ_HANDLED;
++}
++
++static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
++{
++ /* This is the paper-clip reset, it shuts the machine down directly.
++ */
++ machine_power_off();
++
++ return IRQ_HANDLED;
++}
++
+static void __init fsg_init(void)
+{
++ DECLARE_MAC_BUF(mac_buf);
+ uint8_t __iomem *f;
+ int i;
+
+ ixp4xx_sys_init();
+
-+ pm_power_off = fsg_power_off;
-+
+ fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ fsg_flash_resource.end =
+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+ /* Configure CS2 for operation, 8bit and writable */
+ *IXP4XX_EXP_CS2 = 0xbfff0002;
+
++ i2c_register_board_info(0, fsg_i2c_board_info,
++ ARRAY_SIZE(fsg_i2c_board_info));
++
+ /* This is only useful on a modified machine, but it is valuable
+ * to have it first in order to see debug messages, and so that
+ * it does *not* get removed if platform_add_devices fails!
@@ -248,43 +321,64 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-setup.c
+
+ platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
+
++ pm_power_off = fsg_power_off;
++
++ set_irq_type(gpio_to_irq(FSG_RB_GPIO), IRQT_LOW);
++ if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
++ IRQF_DISABLED, "FSG reset button", NULL) < 0) {
++
++ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
++ gpio_to_irq(FSG_RB_GPIO));
++ }
++
++ set_irq_type(gpio_to_irq(FSG_SB_GPIO), IRQT_LOW);
++ if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
++ IRQF_DISABLED, "FSG power button", NULL) < 0) {
++
++ printk(KERN_DEBUG "Power Button IRQ %d not available\n",
++ gpio_to_irq(FSG_SB_GPIO));
++ }
+
+ /*
+ * Map in a portion of the flash and read the MAC addresses.
+ * Since it is stored in BE in the flash itself, we need to
+ * byteswap it if we're in LE mode.
+ */
-+ if ((f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000))) {
++ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
++ if (f) {
+#ifdef __ARMEB__
+ for (i = 0; i < 6; i++) {
+ fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
+ fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
+ }
+#else
-+ fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0422 + 3);
-+ fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0422 + 2);
-+ fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0422 + 1);
-+ fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0422 + 0);
-+ fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0422 + 7);
-+ fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0422 + 6);
-+
-+ fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0422 + 3);
-+ fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C0422 + 2);
-+ fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C0422 + 1);
-+ fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C0422 + 0);
-+ fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C0422 + 7);
-+ fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0422 + 6);
++
++ /*
++ Endian-swapped reads from unaligned addresses are
++ required to extract the two MACs from the big-endian
++ Redboot config area in flash.
++ */
++
++ fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0421);
++ fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0420);
++ fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0427);
++ fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0426);
++ fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0425);
++ fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0424);
++
++ fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0439);
++ fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C043F);
++ fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C043E);
++ fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C043D);
++ fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C043C);
++ fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0443);
+#endif
+ iounmap(f);
+ }
-+ printk(KERN_INFO "FSG: Using MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 0\n",
-+ fsg_plat_eth[0].hwaddr[0], fsg_plat_eth[0].hwaddr[1],
-+ fsg_plat_eth[0].hwaddr[2], fsg_plat_eth[0].hwaddr[3],
-+ fsg_plat_eth[0].hwaddr[4], fsg_plat_eth[0].hwaddr[5]);
-+ printk(KERN_INFO "FSG: Using MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 1\n",
-+ fsg_plat_eth[1].hwaddr[0], fsg_plat_eth[1].hwaddr[1],
-+ fsg_plat_eth[1].hwaddr[2], fsg_plat_eth[1].hwaddr[3],
-+ fsg_plat_eth[1].hwaddr[4], fsg_plat_eth[1].hwaddr[5]);
++ printk(KERN_INFO "FSG: Using MAC address %s for port 0\n",
++ print_mac(mac_buf, fsg_plat_eth[0].hwaddr));
++ printk(KERN_INFO "FSG: Using MAC address %s for port 1\n",
++ print_mac(mac_buf, fsg_plat_eth[1].hwaddr));
+
+}
+
@@ -299,50 +393,10 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-setup.c
+ .init_machine = fsg_init,
+MACHINE_END
+
-Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/Kconfig 2008-01-11 17:05:08.000000000 +1030
-+++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/Kconfig 2008-01-11 17:06:33.000000000 +1030
-@@ -125,6 +125,15 @@
- depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
- default y
-
-+config MACH_FSG
-+ bool
-+ prompt "Freecom FSG-3"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Freecom's
-+ FSG-3 device. For more information on this platform,
-+ see http://www.nslu2-linux.org/wiki/FSG3/HomePage
-+
- #
- # Certain registers and IRQs are only enabled if supporting IXP465 CPUs
- #
-Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/Makefile 2008-01-11 17:05:08.000000000 +1030
-+++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/Makefile 2008-01-11 17:06:33.000000000 +1030
-@@ -15,6 +15,7 @@
- obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
- obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
-+obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
-
- obj-y += common.o
-
-@@ -28,6 +29,7 @@
- obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
- obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
-+obj-$(CONFIG_MACH_FSG) += fsg-setup.o fsg-power.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
-Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/fsg.h
+Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/fsg.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/fsg.h 2008-01-11 17:06:33.000000000 +1030
++++ linux-2.6.24/include/asm-arm/arch-ixp4xx/fsg.h 2008-03-20 21:09:12.000000000 +1030
@@ -0,0 +1,50 @@
+/*
+ * include/asm-arm/arch-ixp4xx/fsg.h
@@ -394,10 +448,10 @@ Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/fsg.h
+#define FSG_LED_USB_BIT 4
+#define FSG_LED_RING_BIT 5
+#define FSG_LED_SYNC_BIT 7
-Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/hardware.h
+Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/hardware.h
===================================================================
---- linux-2.6.23.12-armeb.orig/include/asm-arm/arch-ixp4xx/hardware.h 2008-01-11 17:05:08.000000000 +1030
-+++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/hardware.h 2008-01-11 17:06:33.000000000 +1030
+--- linux-2.6.24.orig/include/asm-arm/arch-ixp4xx/hardware.h 2008-03-20 21:07:50.000000000 +1030
++++ linux-2.6.24/include/asm-arm/arch-ixp4xx/hardware.h 2008-03-20 21:09:12.000000000 +1030
@@ -45,5 +45,6 @@
#include "nslu2.h"
#include "nas100d.h"
@@ -405,10 +459,10 @@ Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/hardware.h
+#include "fsg.h"
#endif /* _ASM_ARCH_HARDWARE_H */
-Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/irqs.h
+Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/irqs.h
===================================================================
---- linux-2.6.23.12-armeb.orig/include/asm-arm/arch-ixp4xx/irqs.h 2008-01-11 17:05:08.000000000 +1030
-+++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/irqs.h 2008-01-11 17:06:33.000000000 +1030
+--- linux-2.6.24.orig/include/asm-arm/arch-ixp4xx/irqs.h 2008-03-20 21:07:50.000000000 +1030
++++ linux-2.6.24/include/asm-arm/arch-ixp4xx/irqs.h 2008-03-20 21:09:12.000000000 +1030
@@ -128,4 +128,11 @@
#define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7
#define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6
@@ -421,104 +475,10 @@ Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/irqs.h
+#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5
+
#endif
-Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-power.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-power.c 2008-01-11 17:06:33.000000000 +1030
-@@ -0,0 +1,89 @@
-+/*
-+ * arch/arm/mach-ixp4xx/fsg-power.c
-+ *
-+ * FSG Power/Reset driver
-+ *
-+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
-+ *
-+ * based on nslu2-power.c
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/reboot.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/jiffies.h>
-+#include <linux/timer.h>
-+
-+#include <asm/gpio.h>
-+#include <asm/mach-types.h>
-+
-+static irqreturn_t fsg_power_handler(int irq, void *dev_id)
-+{
-+ /* Signal init to do the ctrlaltdel action, this will bypass init if
-+ * it hasn't started and do a kernel_restart.
-+ */
-+ ctrl_alt_del();
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
-+{
-+ /* This is the paper-clip reset, it shuts the machine down directly.
-+ */
-+ machine_power_off();
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init fsg_power_init(void)
-+{
-+ if (!(machine_is_fsg()))
-+ return 0;
-+
-+ set_irq_type(gpio_to_irq(FSG_RB_GPIO), IRQT_LOW);
-+ set_irq_type(gpio_to_irq(FSG_SB_GPIO), IRQT_LOW);
-+
-+ if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
-+ IRQF_DISABLED, "FSG reset button", NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-+ gpio_to_irq(FSG_RB_GPIO));
-+
-+ return -EIO;
-+ }
-+
-+ if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
-+ IRQF_DISABLED, "FSG power button", NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Power Button IRQ %d not available\n",
-+ gpio_to_irq(FSG_SB_GPIO));
-+
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static void __exit fsg_power_exit(void)
-+{
-+ if (!(machine_is_fsg()))
-+ return;
-+
-+ free_irq(gpio_to_irq(FSG_SB_GPIO), NULL);
-+ free_irq(gpio_to_irq(FSG_RB_GPIO), NULL);
-+}
-+
-+module_init(fsg_power_init);
-+module_exit(fsg_power_exit);
-+
-+MODULE_AUTHOR("Rod Whitby <rod@whitby.id.au>");
-+MODULE_DESCRIPTION("FSG Power/Reset driver");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.23.12-armeb/drivers/leds/Kconfig
+Index: linux-2.6.24/drivers/leds/Kconfig
===================================================================
---- linux-2.6.23.12-armeb.orig/drivers/leds/Kconfig 2008-01-11 17:05:08.000000000 +1030
-+++ linux-2.6.23.12-armeb/drivers/leds/Kconfig 2008-01-11 17:06:33.000000000 +1030
+--- linux-2.6.24.orig/drivers/leds/Kconfig 2008-03-20 21:07:50.000000000 +1030
++++ linux-2.6.24/drivers/leds/Kconfig 2008-03-20 21:09:12.000000000 +1030
@@ -48,6 +48,12 @@
particular board must have LEDs and they must be connected
to the GPIO lines. If unsure, say Y.
@@ -532,23 +492,23 @@ Index: linux-2.6.23.12-armeb/drivers/leds/Kconfig
config LEDS_TOSA
tristate "LED Support for the Sharp SL-6000 series"
depends on LEDS_CLASS && PXA_SHARPSL
-Index: linux-2.6.23.12-armeb/drivers/leds/Makefile
+Index: linux-2.6.24/drivers/leds/Makefile
===================================================================
---- linux-2.6.23.12-armeb.orig/drivers/leds/Makefile 2008-01-11 17:05:08.000000000 +1030
-+++ linux-2.6.23.12-armeb/drivers/leds/Makefile 2008-01-11 17:06:33.000000000 +1030
-@@ -9,6 +9,7 @@
- obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
- obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o
- obj-$(CONFIG_LEDS_IXP4XX) += leds-ixp4xx-gpio.o
+--- linux-2.6.24.orig/drivers/leds/Makefile 2008-03-20 21:07:50.000000000 +1030
++++ linux-2.6.24/drivers/leds/Makefile 2008-03-20 21:09:56.000000000 +1030
+@@ -20,6 +20,7 @@
+ obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
+ obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
+ obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o
+obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
- obj-$(CONFIG_LEDS_TOSA) += leds-tosa.o
- obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o
- obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o
-Index: linux-2.6.23.12-armeb/drivers/leds/leds-fsg.c
+
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
+Index: linux-2.6.24/drivers/leds/leds-fsg.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23.12-armeb/drivers/leds/leds-fsg.c 2008-01-11 17:06:33.000000000 +1030
-@@ -0,0 +1,243 @@
++++ linux-2.6.24/drivers/leds/leds-fsg.c 2008-03-20 21:09:12.000000000 +1030
+@@ -0,0 +1,261 @@
+/*
+ * LED Driver for the Freecom FSG-3
+ *
@@ -577,73 +537,73 @@ Index: linux-2.6.23.12-armeb/drivers/leds/leds-fsg.c
+static unsigned short latch_value;
+
+
-+static void fsg_led_wlan_set(struct led_classdev *led_cdev, enum led_brightness value)
++static void fsg_led_wlan_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
+{
+ if (value) {
+ latch_value &= ~(1 << FSG_LED_WLAN_BIT);
+ *latch_address = latch_value;
-+ }
-+ else {
++ } else {
+ latch_value |= (1 << FSG_LED_WLAN_BIT);
+ *latch_address = latch_value;
+ }
+}
+
-+static void fsg_led_wan_set(struct led_classdev *led_cdev, enum led_brightness value)
++static void fsg_led_wan_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
+{
+ if (value) {
+ latch_value &= ~(1 << FSG_LED_WAN_BIT);
+ *latch_address = latch_value;
-+ }
-+ else {
++ } else {
+ latch_value |= (1 << FSG_LED_WAN_BIT);
+ *latch_address = latch_value;
+ }
+}
+
-+static void fsg_led_sata_set(struct led_classdev *led_cdev, enum led_brightness value)
++static void fsg_led_sata_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
+{
+ if (value) {
+ latch_value &= ~(1 << FSG_LED_SATA_BIT);
+ *latch_address = latch_value;
-+ }
-+ else {
++ } else {
+ latch_value |= (1 << FSG_LED_SATA_BIT);
+ *latch_address = latch_value;
+ }
+}
+
-+static void fsg_led_usb_set(struct led_classdev *led_cdev, enum led_brightness value)
++static void fsg_led_usb_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
+{
+ if (value) {
+ latch_value &= ~(1 << FSG_LED_USB_BIT);
+ *latch_address = latch_value;
-+ }
-+ else {
++ } else {
+ latch_value |= (1 << FSG_LED_USB_BIT);
+ *latch_address = latch_value;
+ }
+}
+
-+static void fsg_led_sync_set(struct led_classdev *led_cdev, enum led_brightness value)
++static void fsg_led_sync_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
+{
+ if (value) {
+ latch_value &= ~(1 << FSG_LED_SYNC_BIT);
+ *latch_address = latch_value;
-+ }
-+ else {
++ } else {
+ latch_value |= (1 << FSG_LED_SYNC_BIT);
+ *latch_address = latch_value;
+ }
+}
+
-+static void fsg_led_ring_set(struct led_classdev *led_cdev, enum led_brightness value)
++static void fsg_led_ring_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
+{
+ if (value) {
+ latch_value &= ~(1 << FSG_LED_RING_BIT);
+ *latch_address = latch_value;
-+ }
-+ else {
++ } else {
+ latch_value |= (1 << FSG_LED_RING_BIT);
+ *latch_address = latch_value;
+ }
@@ -652,32 +612,32 @@ Index: linux-2.6.23.12-armeb/drivers/leds/leds-fsg.c
+
+
+static struct led_classdev fsg_wlan_led = {
-+ .name = "fsg:wlan",
++ .name = "fsg:blue:wlan",
+ .brightness_set = fsg_led_wlan_set,
+};
+
+static struct led_classdev fsg_wan_led = {
-+ .name = "fsg:wan",
++ .name = "fsg:blue:wan",
+ .brightness_set = fsg_led_wan_set,
+};
+
+static struct led_classdev fsg_sata_led = {
-+ .name = "fsg:sata",
++ .name = "fsg:blue:sata",
+ .brightness_set = fsg_led_sata_set,
+};
+
+static struct led_classdev fsg_usb_led = {
-+ .name = "fsg:usb",
++ .name = "fsg:blue:usb",
+ .brightness_set = fsg_led_usb_set,
+};
+
+static struct led_classdev fsg_sync_led = {
-+ .name = "fsg:sync",
++ .name = "fsg:blue:sync",
+ .brightness_set = fsg_led_sync_set,
+};
+
+static struct led_classdev fsg_ring_led = {
-+ .name = "fsg:ring",
++ .name = "fsg:blue:ring",
+ .brightness_set = fsg_led_ring_set,
+};
+
@@ -712,37 +672,63 @@ Index: linux-2.6.23.12-armeb/drivers/leds/leds-fsg.c
+{
+ int ret;
+
-+ /* FIXME: Need to work out how to handle failure below */
-+
+ ret = led_classdev_register(&pdev->dev, &fsg_wlan_led);
+ if (ret < 0)
-+ return ret;
++ goto failwlan;
+
+ ret = led_classdev_register(&pdev->dev, &fsg_wan_led);
+ if (ret < 0)
-+ return ret;
++ goto failwan;
+
+ ret = led_classdev_register(&pdev->dev, &fsg_sata_led);
+ if (ret < 0)
-+ return ret;
++ goto failsata;
+
+ ret = led_classdev_register(&pdev->dev, &fsg_usb_led);
+ if (ret < 0)
-+ return ret;
++ goto failusb;
+
+ ret = led_classdev_register(&pdev->dev, &fsg_sync_led);
+ if (ret < 0)
-+ return ret;
++ goto failsync;
+
+ ret = led_classdev_register(&pdev->dev, &fsg_ring_led);
+ if (ret < 0)
-+ return ret;
++ goto failring;
++
++ /* Map the LED chip select address space */
++ latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512);
++ if (!latch_address) {
++ ret = -ENOMEM;
++ goto failremap;
++ }
++
++ latch_value = 0xffff;
++ *latch_address = latch_value;
++
++ return ret;
++
++ failremap:
++ led_classdev_unregister(&fsg_ring_led);
++ failring:
++ led_classdev_unregister(&fsg_sync_led);
++ failsync:
++ led_classdev_unregister(&fsg_usb_led);
++ failusb:
++ led_classdev_unregister(&fsg_sata_led);
++ failsata:
++ led_classdev_unregister(&fsg_wan_led);
++ failwan:
++ led_classdev_unregister(&fsg_wlan_led);
++ failwlan:
+
+ return ret;
+}
+
+static int fsg_led_remove(struct platform_device *pdev)
+{
++ iounmap(latch_address);
++
+ led_classdev_unregister(&fsg_wlan_led);
+ led_classdev_unregister(&fsg_wan_led);
+ led_classdev_unregister(&fsg_sata_led);
@@ -769,20 +755,12 @@ Index: linux-2.6.23.12-armeb/drivers/leds/leds-fsg.c
+
+static int __init fsg_led_init(void)
+{
-+ /* Map the LED chip select address space */
-+ latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512);
-+ if (!latch_address)
-+ return -ENOMEM;
-+ latch_value = 0xffff;
-+ *latch_address = latch_value;
-+ /* FIXME: We leak memory if the next line fails */
+ return platform_driver_register(&fsg_led_driver);
+}
+
+static void __exit fsg_led_exit(void)
+{
-+ platform_driver_unregister(&fsg_led_driver);
-+ iounmap(latch_address);
++ platform_driver_unregister(&fsg_led_driver);
+}
+
+
diff --git a/target/linux/ixp4xx/patches-2.6.24/110-pronghorn_metro_support.patch b/target/linux/ixp4xx/patches-2.6.24/110-pronghorn_metro_support.patch
index 80115b8401..fb895e0234 100644
--- a/target/linux/ixp4xx/patches-2.6.24/110-pronghorn_metro_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.24/110-pronghorn_metro_support.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig
===================================================================
---- linux-2.6.23.12.orig/arch/arm/mach-ixp4xx/Kconfig 2008-01-05 13:30:14.000000000 +1030
-+++ linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig 2008-01-05 13:37:05.000000000 +1030
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:23.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:26.000000000 +1030
@@ -57,6 +57,14 @@
WG302 v2 or WAG302 v2 Access Points. For more information
on this platform, see http://openwrt.org
@@ -17,10 +17,10 @@ Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig
config ARCH_IXDP425
bool "IXDP425"
help
-Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile
===================================================================
---- linux-2.6.23.12.orig/arch/arm/mach-ixp4xx/Makefile 2008-01-05 13:32:45.000000000 +1030
-+++ linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile 2008-01-05 13:37:37.000000000 +1030
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:23.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:26.000000000 +1030
@@ -16,6 +16,7 @@
obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
@@ -32,14 +32,14 @@ Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile
@@ -30,5 +31,6 @@
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o fsg-power.o
+ obj-$(CONFIG_MACH_FSG) += fsg-setup.o
+obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23.12/arch/arm/mach-ixp4xx/pronghornmetro-pci.c 2008-01-05 13:37:05.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/pronghornmetro-pci.c 2008-03-12 21:21:26.000000000 +1030
@@ -0,0 +1,74 @@
+/*
+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
@@ -115,10 +115,10 @@ Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
+}
+
+subsys_initcall(pronghornmetro_pci_init);
-Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23.12/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2008-01-05 13:37:05.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2008-03-12 21:21:26.000000000 +1030
@@ -0,0 +1,147 @@
+/*
+ * arch/arm/mach-ixp4xx/pronghornmetro-setup.c
@@ -267,10 +267,10 @@ Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+ .init_machine = pronghornmetro_init,
+MACHINE_END
+#endif
-Index: linux-2.6.23.12/Documentation/arm/IXP4xx
+Index: linux-2.6.24/Documentation/arm/IXP4xx
===================================================================
---- linux-2.6.23.12.orig/Documentation/arm/IXP4xx 2008-01-05 13:30:14.000000000 +1030
-+++ linux-2.6.23.12/Documentation/arm/IXP4xx 2008-01-05 13:37:05.000000000 +1030
+--- linux-2.6.24.orig/Documentation/arm/IXP4xx 2008-03-12 21:20:48.000000000 +1030
++++ linux-2.6.24/Documentation/arm/IXP4xx 2008-03-12 21:21:26.000000000 +1030
@@ -111,6 +111,9 @@
the platform has two mini-PCI slots used for 802.11[bga] cards.
Finally, there is an IDE port hanging off the expansion bus.
@@ -281,10 +281,10 @@ Index: linux-2.6.23.12/Documentation/arm/IXP4xx
Gateworks Avila Network Platform
http://www.gateworks.com/avila_sbc.htm
-Index: linux-2.6.23.12/include/asm-arm/arch-ixp4xx/uncompress.h
+Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/uncompress.h
===================================================================
---- linux-2.6.23.12.orig/include/asm-arm/arch-ixp4xx/uncompress.h 2008-01-05 13:30:14.000000000 +1030
-+++ linux-2.6.23.12/include/asm-arm/arch-ixp4xx/uncompress.h 2008-01-05 13:37:05.000000000 +1030
+--- linux-2.6.24.orig/include/asm-arm/arch-ixp4xx/uncompress.h 2008-03-12 21:20:48.000000000 +1030
++++ linux-2.6.24/include/asm-arm/arch-ixp4xx/uncompress.h 2008-03-12 21:21:26.000000000 +1030
@@ -41,7 +41,8 @@
* Some boards are using UART2 as console
*/
diff --git a/target/linux/ixp4xx/patches-2.6.24/120-compex_support.patch b/target/linux/ixp4xx/patches-2.6.24/120-compex_support.patch
index 2488cb49d8..c029ceda1b 100644
--- a/target/linux/ixp4xx/patches-2.6.24/120-compex_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.24/120-compex_support.patch
@@ -1,6 +1,7 @@
-diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig
---- linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig 2007-10-23 18:03:34.000000000 +0200
-+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-10-23 18:22:41.000000000 +0200
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:26.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:26.000000000 +1030
@@ -65,6 +65,14 @@
Engineering Pronghorn Metro Platform. For more
information on this platform, see <file:Documentation/arm/IXP4xx>.
@@ -16,9 +17,10 @@ diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/m
config ARCH_IXDP425
bool "IXDP425"
help
-diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile
---- linux-2.6.23/arch/arm/mach-ixp4xx/Makefile 2007-10-23 18:03:34.000000000 +0200
-+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile 2007-10-23 18:22:41.000000000 +0200
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:26.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:26.000000000 +1030
@@ -17,6 +17,7 @@
obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
@@ -27,17 +29,17 @@ diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/
obj-y += common.o
-@@ -32,6 +33,7 @@
+@@ -32,5 +33,6 @@
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
obj-$(CONFIG_MACH_FSG) += fsg-setup.o
obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
+obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
-diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c
---- linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c 2007-10-23 18:22:41.000000000 +0200
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/compex-setup.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.24/arch/arm/mach-ixp4xx/compex-setup.c 2008-03-12 21:21:26.000000000 +1030
@@ -0,0 +1,120 @@
+/*
+ * arch/arm/mach-ixp4xx/compex-setup.c
@@ -159,9 +161,10 @@ diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.23-owrt/arc
+ .init_machine = compex_init,
+MACHINE_END
+#endif
-diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/ixdp425-pci.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c
---- linux-2.6.23/arch/arm/mach-ixp4xx/ixdp425-pci.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c 2007-10-23 18:22:41.000000000 +0200
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/ixdp425-pci.c
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/ixdp425-pci.c 2008-03-12 21:20:48.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/ixdp425-pci.c 2008-03-12 21:21:26.000000000 +1030
@@ -66,7 +66,7 @@
int __init ixdp425_pci_init(void)
{
@@ -171,9 +174,10 @@ diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/ixdp425-pci.c linux-2.6.23-owrt/arch
pci_common_init(&ixdp425_pci);
return 0;
}
-diff -Nur linux-2.6.23/arch/arm/tools/mach-types linux-2.6.23-owrt/arch/arm/tools/mach-types
---- linux-2.6.23/arch/arm/tools/mach-types 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6.23-owrt/arch/arm/tools/mach-types 2007-10-23 18:22:41.000000000 +0200
+Index: linux-2.6.24/arch/arm/tools/mach-types
+===================================================================
+--- linux-2.6.24.orig/arch/arm/tools/mach-types 2008-03-12 21:20:48.000000000 +1030
++++ linux-2.6.24/arch/arm/tools/mach-types 2008-03-12 21:21:26.000000000 +1030
@@ -1278,7 +1278,7 @@
smdk6400 MACH_SMDK6400 SMDK6400 1270
nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271
diff --git a/target/linux/ixp4xx/patches-2.6.24/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-2.6.24/130-wrt300nv2_support.patch
index 78e525d309..30a7c55ae0 100644
--- a/target/linux/ixp4xx/patches-2.6.24/130-wrt300nv2_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.24/130-wrt300nv2_support.patch
@@ -1,6 +1,7 @@
-diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig
---- linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig 2007-10-23 18:39:29.000000000 +0200
-+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-10-23 19:11:31.000000000 +0200
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:26.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:27.000000000 +1030
@@ -73,6 +73,14 @@
WP18 or NP18A boards. For more information on this
platform, see http://openwrt.org
@@ -16,9 +17,10 @@ diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/m
config ARCH_IXDP425
bool "IXDP425"
help
-diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile
---- linux-2.6.23/arch/arm/mach-ixp4xx/Makefile 2007-10-23 18:39:29.000000000 +0200
-+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile 2007-10-23 19:11:31.000000000 +0200
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:26.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:27.000000000 +1030
@@ -18,6 +18,7 @@
obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
@@ -27,17 +29,17 @@ diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/
obj-y += common.o
-@@ -34,6 +35,7 @@
+@@ -34,5 +35,6 @@
obj-$(CONFIG_MACH_FSG) += fsg-setup.o
obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
+obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
-diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-pci.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
---- linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-pci.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-pci.c 2007-10-23 19:11:31.000000000 +0200
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.24/arch/arm/mach-ixp4xx/wrt300nv2-pci.c 2008-03-12 21:21:27.000000000 +1030
@@ -0,0 +1,65 @@
+/*
+ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
@@ -104,9 +106,10 @@ diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-pci.c linux-2.6.23-owrt/ar
+}
+
+subsys_initcall(wrt300nv2_pci_init);
-diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
---- linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2007-10-23 19:11:31.000000000 +0200
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.24/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2008-03-12 21:21:27.000000000 +1030
@@ -0,0 +1,108 @@
+/*
+ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
@@ -216,9 +219,10 @@ diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.23-owrt/
+ .init_machine = wrt300nv2_init,
+MACHINE_END
+#endif
-diff -Nur linux-2.6.23/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.23-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
---- linux-2.6.23/include/asm-arm/arch-ixp4xx/uncompress.h 2007-10-23 18:03:35.000000000 +0200
-+++ linux-2.6.23-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-10-23 19:12:30.000000000 +0200
+Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/uncompress.h
+===================================================================
+--- linux-2.6.24.orig/include/asm-arm/arch-ixp4xx/uncompress.h 2008-03-12 21:21:26.000000000 +1030
++++ linux-2.6.24/include/asm-arm/arch-ixp4xx/uncompress.h 2008-03-12 21:21:27.000000000 +1030
@@ -42,7 +42,7 @@
*/
if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
diff --git a/target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch b/target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch
index 129e5ca8e1..379b5aa578 100644
--- a/target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch
@@ -1,6 +1,7 @@
-diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/Kconfig
---- linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig 2008-01-14 22:08:42.000000000 +0100
-+++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/Kconfig 2008-01-14 22:12:21.000000000 +0100
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:28.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:29.000000000 +1030
@@ -49,6 +49,14 @@
7001 Access Point. For more information on this platform,
see http://openwrt.org
@@ -16,9 +17,10 @@ diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23.12-owrt/arch
config MACH_WG302V2
bool "Netgear WG302 v2 / WAG302 v2"
select PCI
-diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/Makefile
---- linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile 2008-01-14 22:08:42.000000000 +0100
-+++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/Makefile 2008-01-14 22:11:47.000000000 +0100
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:28.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:29.000000000 +1030
@@ -14,6 +14,7 @@
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
@@ -33,11 +35,12 @@ diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile linux-2.6.23.12-owrt/arc
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
+obj-$(CONFIG_MACH_WG302V1) += wg302v1-setup.o
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o fsg-power.o
+ obj-$(CONFIG_MACH_FSG) += fsg-setup.o
obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
-diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-pci.c linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-pci.c
---- linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-pci.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-pci.c 2008-01-14 22:33:52.000000000 +0100
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/wg302v1-pci.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.24/arch/arm/mach-ixp4xx/wg302v1-pci.c 2008-03-12 21:21:29.000000000 +1030
@@ -0,0 +1,63 @@
+/*
+ * arch/arch/mach-ixp4xx/wg302v1-pci.c
@@ -102,9 +105,10 @@ diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-pci.c linux-2.6.23.12-owr
+}
+
+subsys_initcall(wg302v1_pci_init);
-diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c
---- linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c 2008-01-14 23:04:01.000000000 +0100
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/wg302v1-setup.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.24/arch/arm/mach-ixp4xx/wg302v1-setup.c 2008-03-12 21:21:29.000000000 +1030
@@ -0,0 +1,109 @@
+/*
+ * arch/arm/mach-ixp4xx/wg302v1-setup.c