summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/brcm47xx/patches-2.6.28/220-bcm5354.patch6
-rw-r--r--target/linux/brcm47xx/patches-2.6.28/280-activate_ssb_support_in_usb.patch16
-rw-r--r--target/linux/brcm47xx/patches-2.6.28/800-fix_cfe_detection.patch2
-rw-r--r--target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch823
-rw-r--r--target/linux/generic-2.6/patches-2.6.28/230-add-r_arm_v4bx-relocation-for-arm-module-loader.patch2
-rw-r--r--target/linux/generic-2.6/patches-2.6.28/976-ssb_update.patch8
6 files changed, 13 insertions, 844 deletions
diff --git a/target/linux/brcm47xx/patches-2.6.28/220-bcm5354.patch b/target/linux/brcm47xx/patches-2.6.28/220-bcm5354.patch
index a6a5e95198..837bd43e75 100644
--- a/target/linux/brcm47xx/patches-2.6.28/220-bcm5354.patch
+++ b/target/linux/brcm47xx/patches-2.6.28/220-bcm5354.patch
@@ -1,6 +1,6 @@
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
-@@ -270,6 +270,8 @@ void ssb_chipco_resume(struct ssb_chipco
+@@ -258,6 +258,8 @@ void ssb_chipco_resume(struct ssb_chipco
void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
u32 *plltype, u32 *n, u32 *m)
{
@@ -9,7 +9,7 @@
*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
switch (*plltype) {
-@@ -293,6 +295,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
+@@ -281,6 +283,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
u32 *plltype, u32 *n, u32 *m)
{
@@ -31,7 +31,7 @@
}
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
-@@ -1011,6 +1011,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+@@ -1013,6 +1013,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
if (bus->chip_id == 0x5365) {
rate = 100000000;
diff --git a/target/linux/brcm47xx/patches-2.6.28/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-2.6.28/280-activate_ssb_support_in_usb.patch
deleted file mode 100644
index aeb9d334c3..0000000000
--- a/target/linux/brcm47xx/patches-2.6.28/280-activate_ssb_support_in_usb.patch
+++ /dev/null
@@ -1,16 +0,0 @@
-This prevents the options from being delete with make kernel_oldconfig.
----
- drivers/ssb/Kconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -126,6 +126,8 @@ config SSB_DRIVER_MIPS
- config SSB_EMBEDDED
- bool
- depends on SSB_DRIVER_MIPS
-+ select USB_EHCI_HCD_SSB if USB_EHCI_HCD
-+ select USB_OHCI_HCD_SSB if USB_OHCI_HCD
- default y
-
- config SSB_DRIVER_EXTIF
diff --git a/target/linux/brcm47xx/patches-2.6.28/800-fix_cfe_detection.patch b/target/linux/brcm47xx/patches-2.6.28/800-fix_cfe_detection.patch
index 6cba540530..c3a8a5738a 100644
--- a/target/linux/brcm47xx/patches-2.6.28/800-fix_cfe_detection.patch
+++ b/target/linux/brcm47xx/patches-2.6.28/800-fix_cfe_detection.patch
@@ -90,7 +90,7 @@
{
char buf[CL_SIZE];
-@@ -146,9 +122,12 @@ static __init void prom_init_mem(void)
+@@ -154,9 +130,12 @@ static __init void prom_init_mem(void)
void __init prom_init(void)
{
diff --git a/target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch b/target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch
deleted file mode 100644
index 7ab70aa54a..0000000000
--- a/target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch
+++ /dev/null
@@ -1,823 +0,0 @@
-Sent to mainline on 2009 Feb 03.
-
-For further modifications, please use separate patch files. This simpifies
-keeping track of what is upstream and what is not. Thanks.
-
---mb
-
-
---- a/drivers/ssb/Makefile
-+++ b/drivers/ssb/Makefile
-@@ -9,6 +9,7 @@ ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia.
-
- # built-in drivers
- ssb-y += driver_chipcommon.o
-+ssb-y += driver_chipcommon_pmu.o
- ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
- ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
- ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
---- /dev/null
-+++ b/drivers/ssb/driver_chipcommon_pmu.c
-@@ -0,0 +1,508 @@
-+/*
-+ * Sonics Silicon Backplane
-+ * Broadcom ChipCommon Power Management Unit driver
-+ *
-+ * Copyright 2009, Michael Buesch <mb@bu3sch.de>
-+ * Copyright 2007, Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/ssb/ssb.h>
-+#include <linux/ssb/ssb_regs.h>
-+#include <linux/ssb/ssb_driver_chipcommon.h>
-+#include <linux/delay.h>
-+
-+#include "ssb_private.h"
-+
-+static u32 ssb_chipco_pll_read(struct ssb_chipcommon *cc, u32 offset)
-+{
-+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset);
-+ return chipco_read32(cc, SSB_CHIPCO_PLLCTL_DATA);
-+}
-+
-+static void ssb_chipco_pll_write(struct ssb_chipcommon *cc,
-+ u32 offset, u32 value)
-+{
-+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset);
-+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
-+}
-+
-+struct pmu0_plltab_entry {
-+ u16 freq; /* Crystal frequency in kHz.*/
-+ u8 xf; /* Crystal frequency value for PMU control */
-+ u8 wb_int;
-+ u32 wb_frac;
-+};
-+
-+static const struct pmu0_plltab_entry pmu0_plltab[] = {
-+ { .freq = 12000, .xf = 1, .wb_int = 73, .wb_frac = 349525, },
-+ { .freq = 13000, .xf = 2, .wb_int = 67, .wb_frac = 725937, },
-+ { .freq = 14400, .xf = 3, .wb_int = 61, .wb_frac = 116508, },
-+ { .freq = 15360, .xf = 4, .wb_int = 57, .wb_frac = 305834, },
-+ { .freq = 16200, .xf = 5, .wb_int = 54, .wb_frac = 336579, },
-+ { .freq = 16800, .xf = 6, .wb_int = 52, .wb_frac = 399457, },
-+ { .freq = 19200, .xf = 7, .wb_int = 45, .wb_frac = 873813, },
-+ { .freq = 19800, .xf = 8, .wb_int = 44, .wb_frac = 466033, },
-+ { .freq = 20000, .xf = 9, .wb_int = 44, .wb_frac = 0, },
-+ { .freq = 25000, .xf = 10, .wb_int = 70, .wb_frac = 419430, },
-+ { .freq = 26000, .xf = 11, .wb_int = 67, .wb_frac = 725937, },
-+ { .freq = 30000, .xf = 12, .wb_int = 58, .wb_frac = 699050, },
-+ { .freq = 38400, .xf = 13, .wb_int = 45, .wb_frac = 873813, },
-+ { .freq = 40000, .xf = 14, .wb_int = 45, .wb_frac = 0, },
-+};
-+#define SSB_PMU0_DEFAULT_XTALFREQ 20000
-+
-+static const struct pmu0_plltab_entry * pmu0_plltab_find_entry(u32 crystalfreq)
-+{
-+ const struct pmu0_plltab_entry *e;
-+ unsigned int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(pmu0_plltab); i++) {
-+ e = &pmu0_plltab[i];
-+ if (e->freq == crystalfreq)
-+ return e;
-+ }
-+
-+ return NULL;
-+}
-+
-+/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */
-+static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc,
-+ u32 crystalfreq)
-+{
-+ struct ssb_bus *bus = cc->dev->bus;
-+ const struct pmu0_plltab_entry *e = NULL;
-+ u32 pmuctl, tmp, pllctl;
-+ unsigned int i;
-+
-+ if ((bus->chip_id == 0x5354) && !crystalfreq) {
-+ /* The 5354 crystal freq is 25MHz */
-+ crystalfreq = 25000;
-+ }
-+ if (crystalfreq)
-+ e = pmu0_plltab_find_entry(crystalfreq);
-+ if (!e)
-+ e = pmu0_plltab_find_entry(SSB_PMU0_DEFAULT_XTALFREQ);
-+ BUG_ON(!e);
-+ crystalfreq = e->freq;
-+ cc->pmu.crystalfreq = e->freq;
-+
-+ /* Check if the PLL already is programmed to this frequency. */
-+ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
-+ if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) {
-+ /* We're already there... */
-+ return;
-+ }
-+
-+ ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
-+ (crystalfreq / 1000), (crystalfreq % 1000));
-+
-+ /* First turn the PLL off. */
-+ switch (bus->chip_id) {
-+ case 0x4328:
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
-+ ~(1 << SSB_PMURES_4328_BB_PLL_PU));
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
-+ ~(1 << SSB_PMURES_4328_BB_PLL_PU));
-+ break;
-+ case 0x5354:
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
-+ ~(1 << SSB_PMURES_5354_BB_PLL_PU));
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
-+ ~(1 << SSB_PMURES_5354_BB_PLL_PU));
-+ break;
-+ default:
-+ SSB_WARN_ON(1);
-+ }
-+ for (i = 1500; i; i--) {
-+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
-+ if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT))
-+ break;
-+ udelay(10);
-+ }
-+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
-+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
-+ ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
-+
-+ /* Set PDIV in PLL control 0. */
-+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
-+ if (crystalfreq >= SSB_PMU0_PLLCTL0_PDIV_FREQ)
-+ pllctl |= SSB_PMU0_PLLCTL0_PDIV_MSK;
-+ else
-+ pllctl &= ~SSB_PMU0_PLLCTL0_PDIV_MSK;
-+ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL0, pllctl);
-+
-+ /* Set WILD in PLL control 1. */
-+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL1);
-+ pllctl &= ~SSB_PMU0_PLLCTL1_STOPMOD;
-+ pllctl &= ~(SSB_PMU0_PLLCTL1_WILD_IMSK | SSB_PMU0_PLLCTL1_WILD_FMSK);
-+ pllctl |= ((u32)e->wb_int << SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_IMSK;
-+ pllctl |= ((u32)e->wb_frac << SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_FMSK;
-+ if (e->wb_frac == 0)
-+ pllctl |= SSB_PMU0_PLLCTL1_STOPMOD;
-+ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL1, pllctl);
-+
-+ /* Set WILD in PLL control 2. */
-+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL2);
-+ pllctl &= ~SSB_PMU0_PLLCTL2_WILD_IMSKHI;
-+ pllctl |= (((u32)e->wb_int >> 4) << SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT) & SSB_PMU0_PLLCTL2_WILD_IMSKHI;
-+ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL2, pllctl);
-+
-+ /* Set the crystalfrequency and the divisor. */
-+ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
-+ pmuctl &= ~SSB_CHIPCO_PMU_CTL_ILP_DIV;
-+ pmuctl |= (((crystalfreq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT)
-+ & SSB_CHIPCO_PMU_CTL_ILP_DIV;
-+ pmuctl &= ~SSB_CHIPCO_PMU_CTL_XTALFREQ;
-+ pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ;
-+ chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl);
-+}
-+
-+struct pmu1_plltab_entry {
-+ u16 freq; /* Crystal frequency in kHz.*/
-+ u8 xf; /* Crystal frequency value for PMU control */
-+ u8 ndiv_int;
-+ u32 ndiv_frac;
-+ u8 p1div;
-+ u8 p2div;
-+};
-+
-+static const struct pmu1_plltab_entry pmu1_plltab[] = {
-+ { .freq = 12000, .xf = 1, .p1div = 3, .p2div = 22, .ndiv_int = 0x9, .ndiv_frac = 0xFFFFEF, },
-+ { .freq = 13000, .xf = 2, .p1div = 1, .p2div = 6, .ndiv_int = 0xb, .ndiv_frac = 0x483483, },
-+ { .freq = 14400, .xf = 3, .p1div = 1, .p2div = 10, .ndiv_int = 0xa, .ndiv_frac = 0x1C71C7, },
-+ { .freq = 15360, .xf = 4, .p1div = 1, .p2div = 5, .ndiv_int = 0xb, .ndiv_frac = 0x755555, },
-+ { .freq = 16200, .xf = 5, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x6E9E06, },
-+ { .freq = 16800, .xf = 6, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x3CF3CF, },
-+ { .freq = 19200, .xf = 7, .p1div = 1, .p2div = 9, .ndiv_int = 0x5, .ndiv_frac = 0x17B425, },
-+ { .freq = 19800, .xf = 8, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0xA57EB, },
-+ { .freq = 20000, .xf = 9, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0, },
-+ { .freq = 24000, .xf = 10, .p1div = 3, .p2div = 11, .ndiv_int = 0xa, .ndiv_frac = 0, },
-+ { .freq = 25000, .xf = 11, .p1div = 5, .p2div = 16, .ndiv_int = 0xb, .ndiv_frac = 0, },
-+ { .freq = 26000, .xf = 12, .p1div = 1, .p2div = 2, .ndiv_int = 0x10, .ndiv_frac = 0xEC4EC4, },
-+ { .freq = 30000, .xf = 13, .p1div = 3, .p2div = 8, .ndiv_int = 0xb, .ndiv_frac = 0, },
-+ { .freq = 38400, .xf = 14, .p1div = 1, .p2div = 5, .ndiv_int = 0x4, .ndiv_frac = 0x955555, },
-+ { .freq = 40000, .xf = 15, .p1div = 1, .p2div = 2, .ndiv_int = 0xb, .ndiv_frac = 0, },
-+};
-+
-+#define SSB_PMU1_DEFAULT_XTALFREQ 15360
-+
-+static const struct pmu1_plltab_entry * pmu1_plltab_find_entry(u32 crystalfreq)
-+{
-+ const struct pmu1_plltab_entry *e;
-+ unsigned int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(pmu1_plltab); i++) {
-+ e = &pmu1_plltab[i];
-+ if (e->freq == crystalfreq)
-+ return e;
-+ }
-+
-+ return NULL;
-+}
-+
-+/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */
-+static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc,
-+ u32 crystalfreq)
-+{
-+ struct ssb_bus *bus = cc->dev->bus;
-+ const struct pmu1_plltab_entry *e = NULL;
-+ u32 buffer_strength = 0;
-+ u32 tmp, pllctl, pmuctl;
-+ unsigned int i;
-+
-+ if (bus->chip_id == 0x4312) {
-+ /* We do not touch the BCM4312 PLL and assume
-+ * the default crystal settings work out-of-the-box. */
-+ cc->pmu.crystalfreq = 20000;
-+ return;
-+ }
-+
-+ if (crystalfreq)
-+ e = pmu1_plltab_find_entry(crystalfreq);
-+ if (!e)
-+ e = pmu1_plltab_find_entry(SSB_PMU1_DEFAULT_XTALFREQ);
-+ BUG_ON(!e);
-+ crystalfreq = e->freq;
-+ cc->pmu.crystalfreq = e->freq;
-+
-+ /* Check if the PLL already is programmed to this frequency. */
-+ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
-+ if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) {
-+ /* We're already there... */
-+ return;
-+ }
-+
-+ ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
-+ (crystalfreq / 1000), (crystalfreq % 1000));
-+
-+ /* First turn the PLL off. */
-+ switch (bus->chip_id) {
-+ case 0x4325:
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
-+ ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) |
-+ (1 << SSB_PMURES_4325_HT_AVAIL)));
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
-+ ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) |
-+ (1 << SSB_PMURES_4325_HT_AVAIL)));
-+ /* Adjust the BBPLL to 2 on all channels later. */
-+ buffer_strength = 0x222222;
-+ break;
-+ default:
-+ SSB_WARN_ON(1);
-+ }
-+ for (i = 1500; i; i--) {
-+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
-+ if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT))
-+ break;
-+ udelay(10);
-+ }
-+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
-+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
-+ ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
-+
-+ /* Set p1div and p2div. */
-+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
-+ pllctl &= ~(SSB_PMU1_PLLCTL0_P1DIV | SSB_PMU1_PLLCTL0_P2DIV);
-+ pllctl |= ((u32)e->p1div << SSB_PMU1_PLLCTL0_P1DIV_SHIFT) & SSB_PMU1_PLLCTL0_P1DIV;
-+ pllctl |= ((u32)e->p2div << SSB_PMU1_PLLCTL0_P2DIV_SHIFT) & SSB_PMU1_PLLCTL0_P2DIV;
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, pllctl);
-+
-+ /* Set ndiv int and ndiv mode */
-+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL2);
-+ pllctl &= ~(SSB_PMU1_PLLCTL2_NDIVINT | SSB_PMU1_PLLCTL2_NDIVMODE);
-+ pllctl |= ((u32)e->ndiv_int << SSB_PMU1_PLLCTL2_NDIVINT_SHIFT) & SSB_PMU1_PLLCTL2_NDIVINT;
-+ pllctl |= (1 << SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT) & SSB_PMU1_PLLCTL2_NDIVMODE;
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, pllctl);
-+
-+ /* Set ndiv frac */
-+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL3);
-+ pllctl &= ~SSB_PMU1_PLLCTL3_NDIVFRAC;
-+ pllctl |= ((u32)e->ndiv_frac << SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT) & SSB_PMU1_PLLCTL3_NDIVFRAC;
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, pllctl);
-+
-+ /* Change the drive strength, if required. */
-+ if (buffer_strength) {
-+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL5);
-+ pllctl &= ~SSB_PMU1_PLLCTL5_CLKDRV;
-+ pllctl |= (buffer_strength << SSB_PMU1_PLLCTL5_CLKDRV_SHIFT) & SSB_PMU1_PLLCTL5_CLKDRV;
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, pllctl);
-+ }
-+
-+ /* Tune the crystalfreq and the divisor. */
-+ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
-+ pmuctl &= ~(SSB_CHIPCO_PMU_CTL_ILP_DIV | SSB_CHIPCO_PMU_CTL_XTALFREQ);
-+ pmuctl |= ((((u32)e->freq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT)
-+ & SSB_CHIPCO_PMU_CTL_ILP_DIV;
-+ pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ;
-+ chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl);
-+}
-+
-+static void ssb_pmu_pll_init(struct ssb_chipcommon *cc)
-+{
-+ struct ssb_bus *bus = cc->dev->bus;
-+ u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */
-+
-+ if (bus->bustype == SSB_BUSTYPE_SSB) {
-+ /* TODO: The user may override the crystal frequency. */
-+ }
-+
-+ switch (bus->chip_id) {
-+ case 0x4312:
-+ case 0x4325:
-+ ssb_pmu1_pllinit_r0(cc, crystalfreq);
-+ break;
-+ case 0x4328:
-+ case 0x5354:
-+ ssb_pmu0_pllinit_r0(cc, crystalfreq);
-+ break;
-+ default:
-+ ssb_printk(KERN_ERR PFX
-+ "ERROR: PLL init unknown for device %04X\n",
-+ bus->chip_id);
-+ }
-+}
-+
-+struct pmu_res_updown_tab_entry {
-+ u8 resource; /* The resource number */
-+ u16 updown; /* The updown value */
-+};
-+
-+enum pmu_res_depend_tab_task {
-+ PMU_RES_DEP_SET = 1,
-+ PMU_RES_DEP_ADD,
-+ PMU_RES_DEP_REMOVE,
-+};
-+
-+struct pmu_res_depend_tab_entry {
-+ u8 resource; /* The resource number */
-+ u8 task; /* SET | ADD | REMOVE */
-+ u32 depend; /* The depend mask */
-+};
-+
-+static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4328a0[] = {
-+ { .resource = SSB_PMURES_4328_EXT_SWITCHER_PWM, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_BB_SWITCHER_PWM, .updown = 0x1F01, },
-+ { .resource = SSB_PMURES_4328_BB_SWITCHER_BURST, .updown = 0x010F, },
-+ { .resource = SSB_PMURES_4328_BB_EXT_SWITCHER_BURST, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_ILP_REQUEST, .updown = 0x0202, },
-+ { .resource = SSB_PMURES_4328_RADIO_SWITCHER_PWM, .updown = 0x0F01, },
-+ { .resource = SSB_PMURES_4328_RADIO_SWITCHER_BURST, .updown = 0x0F01, },
-+ { .resource = SSB_PMURES_4328_ROM_SWITCH, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_PA_REF_LDO, .updown = 0x0F01, },
-+ { .resource = SSB_PMURES_4328_RADIO_LDO, .updown = 0x0F01, },
-+ { .resource = SSB_PMURES_4328_AFE_LDO, .updown = 0x0F01, },
-+ { .resource = SSB_PMURES_4328_PLL_LDO, .updown = 0x0F01, },
-+ { .resource = SSB_PMURES_4328_BG_FILTBYP, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_TX_FILTBYP, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_RX_FILTBYP, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_XTAL_PU, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_XTAL_EN, .updown = 0xA001, },
-+ { .resource = SSB_PMURES_4328_BB_PLL_FILTBYP, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_RF_PLL_FILTBYP, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_BB_PLL_PU, .updown = 0x0701, },
-+};
-+
-+static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4328a0[] = {
-+ {
-+ /* Adjust ILP Request to avoid forcing EXT/BB into burst mode. */
-+ .resource = SSB_PMURES_4328_ILP_REQUEST,
-+ .task = PMU_RES_DEP_SET,
-+ .depend = ((1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) |
-+ (1 << SSB_PMURES_4328_BB_SWITCHER_PWM)),
-+ },
-+};
-+
-+static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4325a0[] = {
-+ { .resource = SSB_PMURES_4325_XTAL_PU, .updown = 0x1501, },
-+};
-+
-+static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4325a0[] = {
-+ {
-+ /* Adjust HT-Available dependencies. */
-+ .resource = SSB_PMURES_4325_HT_AVAIL,
-+ .task = PMU_RES_DEP_ADD,
-+ .depend = ((1 << SSB_PMURES_4325_RX_PWRSW_PU) |
-+ (1 << SSB_PMURES_4325_TX_PWRSW_PU) |
-+ (1 << SSB_PMURES_4325_LOGEN_PWRSW_PU) |
-+ (1 << SSB_PMURES_4325_AFE_PWRSW_PU)),
-+ },
-+};
-+
-+static void ssb_pmu_resources_init(struct ssb_chipcommon *cc)
-+{
-+ struct ssb_bus *bus = cc->dev->bus;
-+ u32 min_msk = 0, max_msk = 0;
-+ unsigned int i;
-+ const struct pmu_res_updown_tab_entry *updown_tab = NULL;
-+ unsigned int updown_tab_size;
-+ const struct pmu_res_depend_tab_entry *depend_tab = NULL;
-+ unsigned int depend_tab_size;
-+
-+ switch (bus->chip_id) {
-+ case 0x4312:
-+ /* We keep the default settings:
-+ * min_msk = 0xCBB
-+ * max_msk = 0x7FFFF
-+ */
-+ break;
-+ case 0x4325:
-+ /* Power OTP down later. */
-+ min_msk = (1 << SSB_PMURES_4325_CBUCK_BURST) |
-+ (1 << SSB_PMURES_4325_LNLDO2_PU);
-+ if (chipco_read32(cc, SSB_CHIPCO_CHIPSTAT) &
-+ SSB_CHIPCO_CHST_4325_PMUTOP_2B)
-+ min_msk |= (1 << SSB_PMURES_4325_CLDO_CBUCK_BURST);
-+ /* The PLL may turn on, if it decides so. */
-+ max_msk = 0xFFFFF;
-+ updown_tab = pmu_res_updown_tab_4325a0;
-+ updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4325a0);
-+ depend_tab = pmu_res_depend_tab_4325a0;
-+ depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4325a0);
-+ break;
-+ case 0x4328:
-+ min_msk = (1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) |
-+ (1 << SSB_PMURES_4328_BB_SWITCHER_PWM) |
-+ (1 << SSB_PMURES_4328_XTAL_EN);
-+ /* The PLL may turn on, if it decides so. */
-+ max_msk = 0xFFFFF;
-+ updown_tab = pmu_res_updown_tab_4328a0;
-+ updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4328a0);
-+ depend_tab = pmu_res_depend_tab_4328a0;
-+ depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4328a0);
-+ break;
-+ case 0x5354:
-+ /* The PLL may turn on, if it decides so. */
-+ max_msk = 0xFFFFF;
-+ break;
-+ default:
-+ ssb_printk(KERN_ERR PFX
-+ "ERROR: PMU resource config unknown for device %04X\n",
-+ bus->chip_id);
-+ }
-+
-+ if (updown_tab) {
-+ for (i = 0; i < updown_tab_size; i++) {
-+ chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL,
-+ updown_tab[i].resource);
-+ chipco_write32(cc, SSB_CHIPCO_PMU_RES_UPDNTM,
-+ updown_tab[i].updown);
-+ }
-+ }
-+ if (depend_tab) {
-+ for (i = 0; i < depend_tab_size; i++) {
-+ chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL,
-+ depend_tab[i].resource);
-+ switch (depend_tab[i].task) {
-+ case PMU_RES_DEP_SET:
-+ chipco_write32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
-+ depend_tab[i].depend);
-+ break;
-+ case PMU_RES_DEP_ADD:
-+ chipco_set32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
-+ depend_tab[i].depend);
-+ break;
-+ case PMU_RES_DEP_REMOVE:
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
-+ ~(depend_tab[i].depend));
-+ break;
-+ default:
-+ SSB_WARN_ON(1);
-+ }
-+ }
-+ }
-+
-+ /* Set the resource masks. */
-+ if (min_msk)
-+ chipco_write32(cc, SSB_CHIPCO_PMU_MINRES_MSK, min_msk);
-+ if (max_msk)
-+ chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
-+}
-+
-+void ssb_pmu_init(struct ssb_chipcommon *cc)
-+{
-+ struct ssb_bus *bus = cc->dev->bus;
-+ u32 pmucap;
-+
-+ if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
-+ return;
-+
-+ pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
-+ cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
-+
-+ ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
-+ cc->pmu.rev, pmucap);
-+
-+ if (cc->pmu.rev >= 1) {
-+ if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
-+ ~SSB_CHIPCO_PMU_CTL_NOILPONW);
-+ } else {
-+ chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
-+ SSB_CHIPCO_PMU_CTL_NOILPONW);
-+ }
-+ }
-+ ssb_pmu_pll_init(cc);
-+ ssb_pmu_resources_init(cc);
-+}
---- a/drivers/ssb/driver_chipcommon.c
-+++ b/drivers/ssb/driver_chipcommon.c
-@@ -26,19 +26,6 @@ enum ssb_clksrc {
- };
-
-
--static inline u32 chipco_read32(struct ssb_chipcommon *cc,
-- u16 offset)
--{
-- return ssb_read32(cc->dev, offset);
--}
--
--static inline void chipco_write32(struct ssb_chipcommon *cc,
-- u16 offset,
-- u32 value)
--{
-- ssb_write32(cc->dev, offset, value);
--}
--
- static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
- u32 mask, u32 value)
- {
-@@ -246,6 +233,7 @@ void ssb_chipcommon_init(struct ssb_chip
- {
- if (!cc->dev)
- return; /* We don't have a ChipCommon */
-+ ssb_pmu_init(cc);
- chipco_powercontrol_init(cc);
- ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
- calc_fast_powerup_delay(cc);
---- a/include/linux/ssb/ssb_driver_chipcommon.h
-+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -181,6 +181,16 @@
- #define SSB_CHIPCO_PROG_WAITCNT 0x0124
- #define SSB_CHIPCO_FLASH_CFG 0x0128
- #define SSB_CHIPCO_FLASH_WAITCNT 0x012C
-+#define SSB_CHIPCO_CLKCTLST 0x01E0 /* Clock control and status (rev >= 20) */
-+#define SSB_CHIPCO_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */
-+#define SSB_CHIPCO_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */
-+#define SSB_CHIPCO_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */
-+#define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
-+#define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
-+#define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
-+#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */
-+#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */
-+#define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
- #define SSB_CHIPCO_UART0_DATA 0x0300
- #define SSB_CHIPCO_UART0_IMR 0x0304
- #define SSB_CHIPCO_UART0_FCR 0x0308
-@@ -197,6 +207,196 @@
- #define SSB_CHIPCO_UART1_LSR 0x0414
- #define SSB_CHIPCO_UART1_MSR 0x0418
- #define SSB_CHIPCO_UART1_SCRATCH 0x041C
-+/* PMU registers (rev >= 20) */
-+#define SSB_CHIPCO_PMU_CTL 0x0600 /* PMU control */
-+#define SSB_CHIPCO_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
-+#define SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT 16
-+#define SSB_CHIPCO_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
-+#define SSB_CHIPCO_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
-+#define SSB_CHIPCO_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */
-+#define SSB_CHIPCO_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */
-+#define SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT 2
-+#define SSB_CHIPCO_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */
-+#define SSB_CHIPCO_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */
-+#define SSB_CHIPCO_PMU_CAP 0x0604 /* PMU capabilities */
-+#define SSB_CHIPCO_PMU_CAP_REVISION 0x000000FF /* Revision mask */
-+#define SSB_CHIPCO_PMU_STAT 0x0608 /* PMU status */
-+#define SSB_CHIPCO_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
-+#define SSB_CHIPCO_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
-+#define SSB_CHIPCO_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
-+#define SSB_CHIPCO_PMU_STAT_HAVEHT 0x00000004 /* HT available */
-+#define SSB_CHIPCO_PMU_STAT_RESINIT 0x00000003 /* Res init */
-+#define SSB_CHIPCO_PMU_RES_STAT 0x060C /* PMU res status */
-+#define SSB_CHIPCO_PMU_RES_PEND 0x0610 /* PMU res pending */
-+#define SSB_CHIPCO_PMU_TIMER 0x0614 /* PMU timer */
-+#define SSB_CHIPCO_PMU_MINRES_MSK 0x0618 /* PMU min res mask */
-+#define SSB_CHIPCO_PMU_MAXRES_MSK 0x061C /* PMU max res mask */
-+#define SSB_CHIPCO_PMU_RES_TABSEL 0x0620 /* PMU res table sel */
-+#define SSB_CHIPCO_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */
-+#define SSB_CHIPCO_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */
-+#define SSB_CHIPCO_PMU_RES_TIMER 0x062C /* PMU res timer */
-+#define SSB_CHIPCO_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */
-+#define SSB_CHIPCO_PMU_WATCHDOG 0x0634 /* PMU watchdog */
-+#define SSB_CHIPCO_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */
-+#define SSB_CHIPCO_PMU_RES_REQT 0x0644 /* PMU res req timer */
-+#define SSB_CHIPCO_PMU_RES_REQM 0x0648 /* PMU res req mask */
-+#define SSB_CHIPCO_CHIPCTL_ADDR 0x0650
-+#define SSB_CHIPCO_CHIPCTL_DATA 0x0654
-+#define SSB_CHIPCO_REGCTL_ADDR 0x0658
-+#define SSB_CHIPCO_REGCTL_DATA 0x065C
-+#define SSB_CHIPCO_PLLCTL_ADDR 0x0660
-+#define SSB_CHIPCO_PLLCTL_DATA 0x0664
-+
-+
-+
-+/** PMU PLL registers */
-+
-+/* PMU rev 0 PLL registers */
-+#define SSB_PMU0_PLLCTL0 0
-+#define SSB_PMU0_PLLCTL0_PDIV_MSK 0x00000001
-+#define SSB_PMU0_PLLCTL0_PDIV_FREQ 25000 /* kHz */
-+#define SSB_PMU0_PLLCTL1 1
-+#define SSB_PMU0_PLLCTL1_WILD_IMSK 0xF0000000 /* Wild int mask (low nibble) */
-+#define SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT 28
-+#define SSB_PMU0_PLLCTL1_WILD_FMSK 0x0FFFFF00 /* Wild frac mask */
-+#define SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT 8
-+#define SSB_PMU0_PLLCTL1_STOPMOD 0x00000040 /* Stop mod */
-+#define SSB_PMU0_PLLCTL2 2
-+#define SSB_PMU0_PLLCTL2_WILD_IMSKHI 0x0000000F /* Wild int mask (high nibble) */
-+#define SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT 0
-+
-+/* PMU rev 1 PLL registers */
-+#define SSB_PMU1_PLLCTL0 0
-+#define SSB_PMU1_PLLCTL0_P1DIV 0x00F00000 /* P1 div */
-+#define SSB_PMU1_PLLCTL0_P1DIV_SHIFT 20
-+#define SSB_PMU1_PLLCTL0_P2DIV 0x0F000000 /* P2 div */
-+#define SSB_PMU1_PLLCTL0_P2DIV_SHIFT 24
-+#define SSB_PMU1_PLLCTL1 1
-+#define SSB_PMU1_PLLCTL1_M1DIV 0x000000FF /* M1 div */
-+#define SSB_PMU1_PLLCTL1_M1DIV_SHIFT 0
-+#define SSB_PMU1_PLLCTL1_M2DIV 0x0000FF00 /* M2 div */
-+#define SSB_PMU1_PLLCTL1_M2DIV_SHIFT 8
-+#define SSB_PMU1_PLLCTL1_M3DIV 0x00FF0000 /* M3 div */
-+#define SSB_PMU1_PLLCTL1_M3DIV_SHIFT 16
-+#define SSB_PMU1_PLLCTL1_M4DIV 0xFF000000 /* M4 div */
-+#define SSB_PMU1_PLLCTL1_M4DIV_SHIFT 24
-+#define SSB_PMU1_PLLCTL2 2
-+#define SSB_PMU1_PLLCTL2_M5DIV 0x000000FF /* M5 div */
-+#define SSB_PMU1_PLLCTL2_M5DIV_SHIFT 0
-+#define SSB_PMU1_PLLCTL2_M6DIV 0x0000FF00 /* M6 div */
-+#define SSB_PMU1_PLLCTL2_M6DIV_SHIFT 8
-+#define SSB_PMU1_PLLCTL2_NDIVMODE 0x000E0000 /* NDIV mode */
-+#define SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT 17
-+#define SSB_PMU1_PLLCTL2_NDIVINT 0x1FF00000 /* NDIV int */
-+#define SSB_PMU1_PLLCTL2_NDIVINT_SHIFT 20
-+#define SSB_PMU1_PLLCTL3 3
-+#define SSB_PMU1_PLLCTL3_NDIVFRAC 0x00FFFFFF /* NDIV frac */
-+#define SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT 0
-+#define SSB_PMU1_PLLCTL4 4
-+#define SSB_PMU1_PLLCTL5 5
-+#define SSB_PMU1_PLLCTL5_CLKDRV 0xFFFFFF00 /* clk drv */
-+#define SSB_PMU1_PLLCTL5_CLKDRV_SHIFT 8
-+
-+/* BCM4312 PLL resource numbers. */
-+#define SSB_PMURES_4312_SWITCHER_BURST 0
-+#define SSB_PMURES_4312_SWITCHER_PWM 1
-+#define SSB_PMURES_4312_PA_REF_LDO 2
-+#define SSB_PMURES_4312_CORE_LDO_BURST 3
-+#define SSB_PMURES_4312_CORE_LDO_PWM 4
-+#define SSB_PMURES_4312_RADIO_LDO 5
-+#define SSB_PMURES_4312_ILP_REQUEST 6
-+#define SSB_PMURES_4312_BG_FILTBYP 7
-+#define SSB_PMURES_4312_TX_FILTBYP 8
-+#define SSB_PMURES_4312_RX_FILTBYP 9
-+#define SSB_PMURES_4312_XTAL_PU 10
-+#define SSB_PMURES_4312_ALP_AVAIL 11
-+#define SSB_PMURES_4312_BB_PLL_FILTBYP 12
-+#define SSB_PMURES_4312_RF_PLL_FILTBYP 13
-+#define SSB_PMURES_4312_HT_AVAIL 14
-+
-+/* BCM4325 PLL resource numbers. */
-+#define SSB_PMURES_4325_BUCK_BOOST_BURST 0
-+#define SSB_PMURES_4325_CBUCK_BURST 1
-+#define SSB_PMURES_4325_CBUCK_PWM 2
-+#define SSB_PMURES_4325_CLDO_CBUCK_BURST 3
-+#define SSB_PMURES_4325_CLDO_CBUCK_PWM 4
-+#define SSB_PMURES_4325_BUCK_BOOST_PWM 5
-+#define SSB_PMURES_4325_ILP_REQUEST 6
-+#define SSB_PMURES_4325_ABUCK_BURST 7
-+#define SSB_PMURES_4325_ABUCK_PWM 8
-+#define SSB_PMURES_4325_LNLDO1_PU 9
-+#define SSB_PMURES_4325_LNLDO2_PU 10
-+#define SSB_PMURES_4325_LNLDO3_PU 11
-+#define SSB_PMURES_4325_LNLDO4_PU 12
-+#define SSB_PMURES_4325_XTAL_PU 13
-+#define SSB_PMURES_4325_ALP_AVAIL 14
-+#define SSB_PMURES_4325_RX_PWRSW_PU 15
-+#define SSB_PMURES_4325_TX_PWRSW_PU 16
-+#define SSB_PMURES_4325_RFPLL_PWRSW_PU 17
-+#define SSB_PMURES_4325_LOGEN_PWRSW_PU 18
-+#define SSB_PMURES_4325_AFE_PWRSW_PU 19
-+#define SSB_PMURES_4325_BBPLL_PWRSW_PU 20
-+#define SSB_PMURES_4325_HT_AVAIL 21
-+
-+/* BCM4328 PLL resource numbers. */
-+#define SSB_PMURES_4328_EXT_SWITCHER_PWM 0
-+#define SSB_PMURES_4328_BB_SWITCHER_PWM 1
-+#define SSB_PMURES_4328_BB_SWITCHER_BURST 2
-+#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST 3
-+#define SSB_PMURES_4328_ILP_REQUEST 4
-+#define SSB_PMURES_4328_RADIO_SWITCHER_PWM 5
-+#define SSB_PMURES_4328_RADIO_SWITCHER_BURST 6
-+#define SSB_PMURES_4328_ROM_SWITCH 7
-+#define SSB_PMURES_4328_PA_REF_LDO 8
-+#define SSB_PMURES_4328_RADIO_LDO 9
-+#define SSB_PMURES_4328_AFE_LDO 10
-+#define SSB_PMURES_4328_PLL_LDO 11
-+#define SSB_PMURES_4328_BG_FILTBYP 12
-+#define SSB_PMURES_4328_TX_FILTBYP 13
-+#define SSB_PMURES_4328_RX_FILTBYP 14
-+#define SSB_PMURES_4328_XTAL_PU 15
-+#define SSB_PMURES_4328_XTAL_EN 16
-+#define SSB_PMURES_4328_BB_PLL_FILTBYP 17
-+#define SSB_PMURES_4328_RF_PLL_FILTBYP 18
-+#define SSB_PMURES_4328_BB_PLL_PU 19
-+
-+/* BCM5354 PLL resource numbers. */
-+#define SSB_PMURES_5354_EXT_SWITCHER_PWM 0
-+#define SSB_PMURES_5354_BB_SWITCHER_PWM 1
-+#define SSB_PMURES_5354_BB_SWITCHER_BURST 2
-+#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST 3
-+#define SSB_PMURES_5354_ILP_REQUEST 4
-+#define SSB_PMURES_5354_RADIO_SWITCHER_PWM 5
-+#define SSB_PMURES_5354_RADIO_SWITCHER_BURST 6
-+#define SSB_PMURES_5354_ROM_SWITCH 7
-+#define SSB_PMURES_5354_PA_REF_LDO 8
-+#define SSB_PMURES_5354_RADIO_LDO 9
-+#define SSB_PMURES_5354_AFE_LDO 10
-+#define SSB_PMURES_5354_PLL_LDO 11
-+#define SSB_PMURES_5354_BG_FILTBYP 12
-+#define SSB_PMURES_5354_TX_FILTBYP 13
-+#define SSB_PMURES_5354_RX_FILTBYP 14
-+#define SSB_PMURES_5354_XTAL_PU 15
-+#define SSB_PMURES_5354_XTAL_EN 16
-+#define SSB_PMURES_5354_BB_PLL_FILTBYP 17
-+#define SSB_PMURES_5354_RF_PLL_FILTBYP 18
-+#define SSB_PMURES_5354_BB_PLL_PU 19
-+
-+
-+
-+/** Chip specific Chip-Status register contents. */
-+#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003
-+#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
-+#define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
-+#define SSB_CHIPCO_CHST_4325_OTP_SEL 2 /* OTP is powered up, no SPROM */
-+#define SSB_CHIPCO_CHST_4325_OTP_PWRDN 3 /* OTP is powered down, SPROM is present */
-+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE 0x00000004
-+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT 2
-+#define SSB_CHIPCO_CHST_4325_RCAL_VALID 0x00000008
-+#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT 3
-+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE 0x000001F0
-+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4
-+#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */
-
-
-
-@@ -353,11 +553,20 @@
- struct ssb_device;
- struct ssb_serial_port;
-
-+/* Data for the PMU, if available.
-+ * Check availability with ((struct ssb_chipcommon)->capabilities & SSB_CHIPCO_CAP_PMU)
-+ */
-+struct ssb_chipcommon_pmu {
-+ u8 rev; /* PMU revision */
-+ u32 crystalfreq; /* The active crystal frequency (in kHz) */
-+};
-+
- struct ssb_chipcommon {
- struct ssb_device *dev;
- u32 capabilities;
- /* Fast Powerup Delay constant */
- u16 fast_pwrup_delay;
-+ struct ssb_chipcommon_pmu pmu;
- };
-
- static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
-@@ -365,6 +574,17 @@ static inline bool ssb_chipco_available(
- return (cc->dev != NULL);
- }
-
-+/* Register access */
-+#define chipco_read32(cc, offset) ssb_read32((cc)->dev, offset)
-+#define chipco_write32(cc, offset, val) ssb_write32((cc)->dev, offset, val)
-+
-+#define chipco_mask32(cc, offset, mask) \
-+ chipco_write32(cc, offset, chipco_read32(cc, offset) & (mask))
-+#define chipco_set32(cc, offset, set) \
-+ chipco_write32(cc, offset, chipco_read32(cc, offset) | (set))
-+#define chipco_maskset32(cc, offset, mask, set) \
-+ chipco_write32(cc, offset, (chipco_read32(cc, offset) & (mask)) | (set))
-+
- extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
-
- extern void ssb_chipco_suspend(struct ssb_chipcommon *cc);
-@@ -406,4 +626,8 @@ extern int ssb_chipco_serial_init(struct
- struct ssb_serial_port *ports);
- #endif /* CONFIG_SSB_SERIAL */
-
-+/* PMU support */
-+extern void ssb_pmu_init(struct ssb_chipcommon *cc);
-+
-+
- #endif /* LINUX_SSB_CHIPCO_H_ */
diff --git a/target/linux/generic-2.6/patches-2.6.28/230-add-r_arm_v4bx-relocation-for-arm-module-loader.patch b/target/linux/generic-2.6/patches-2.6.28/230-add-r_arm_v4bx-relocation-for-arm-module-loader.patch
index f78bba8c94..3e8d1fb0ba 100644
--- a/target/linux/generic-2.6/patches-2.6.28/230-add-r_arm_v4bx-relocation-for-arm-module-loader.patch
+++ b/target/linux/generic-2.6/patches-2.6.28/230-add-r_arm_v4bx-relocation-for-arm-module-loader.patch
@@ -10,7 +10,7 @@
* These are used to set parameters in the core dumps.
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
-@@ -132,6 +132,15 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
+@@ -136,6 +136,15 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
*(u32 *)loc |= offset & 0x00ffffff;
break;
diff --git a/target/linux/generic-2.6/patches-2.6.28/976-ssb_update.patch b/target/linux/generic-2.6/patches-2.6.28/976-ssb_update.patch
index cd44b9860b..279a116d9c 100644
--- a/target/linux/generic-2.6/patches-2.6.28/976-ssb_update.patch
+++ b/target/linux/generic-2.6/patches-2.6.28/976-ssb_update.patch
@@ -1440,6 +1440,14 @@
static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
u32 mask, u32 value)
{
+@@ -246,6 +233,7 @@ void ssb_chipcommon_init(struct ssb_chip
+ {
+ if (!cc->dev)
+ return; /* We don't have a ChipCommon */
++ ssb_pmu_init(cc);
+ chipco_powercontrol_init(cc);
+ ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
+ calc_fast_powerup_delay(cc);
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -175,6 +175,8 @@ static u32 scan_read32(struct ssb_bus *b