diff options
Diffstat (limited to 'target')
10 files changed, 208 insertions, 131 deletions
diff --git a/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_chipcommon.c b/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_chipcommon.c index 8e511c77b5..a283de9e3a 100644 --- a/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_chipcommon.c +++ b/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_chipcommon.c @@ -293,15 +293,15 @@ void ssb_chipco_timing_init(struct ssb_chipcommon *cc, /* set register for external IO to control LED. */ chipco_write32(cc, SSB_CHIPCO_PROG_CFG, 0x11); - tmp = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */ - tmp |= ceildiv(40, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 40ns */ - tmp |= ceildiv(240, ns); /* Waitcount-0 = 240ns */ + tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */ + tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 40ns */ + tmp |= DIV_ROUND_UP(240, ns); /* Waitcount-0 = 240ns */ chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */ /* Set timing for the flash */ - tmp = ceildiv(10, ns) << SSB_FLASH_WCNT_3_SHIFT; /* Waitcount-3 = 10nS */ - tmp |= ceildiv(10, ns) << SSB_FLASH_WCNT_1_SHIFT; /* Waitcount-1 = 10nS */ - tmp |= ceildiv(120, ns); /* Waitcount-0 = 120nS */ + tmp = DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_3_SHIFT; /* Waitcount-3 = 10nS */ + tmp |= DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_1_SHIFT; /* Waitcount-1 = 10nS */ + tmp |= DIV_ROUND_UP(120, ns); /* Waitcount-0 = 120nS */ if ((bus->chip_id == 0x5365) || (dev->id.revision < 9)) chipco_write32(cc, SSB_CHIPCO_FLASH_WAITCNT, tmp); @@ -312,10 +312,10 @@ void ssb_chipco_timing_init(struct ssb_chipcommon *cc, if (bus->chip_id == 0x5350) { /* Enable EXTIF */ - tmp = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */ - tmp |= ceildiv(20, ns) << SSB_PROG_WCNT_2_SHIFT; /* Waitcount-2 = 20ns */ - tmp |= ceildiv(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */ - tmp |= ceildiv(120, ns); /* Waitcount-0 = 120ns */ + tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */ + tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT; /* Waitcount-2 = 20ns */ + tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */ + tmp |= DIV_ROUND_UP(120, ns); /* Waitcount-0 = 120ns */ chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */ } } diff --git a/target/linux/brcm47xx-2.6/files/drivers/ssb/main.c b/target/linux/brcm47xx-2.6/files/drivers/ssb/main.c index a2d22312ca..a892f1dafc 100644 --- a/target/linux/brcm47xx-2.6/files/drivers/ssb/main.c +++ b/target/linux/brcm47xx-2.6/files/drivers/ssb/main.c @@ -32,7 +32,7 @@ MODULE_LICENSE("GPL"); static LIST_HEAD(attach_queue); static LIST_HEAD(buses); -static int nr_buses; +static unsigned int next_busnumber; static DEFINE_MUTEX(buses_mutex); static void ssb_buses_lock(void); @@ -365,7 +365,7 @@ static int ssb_devices_register(struct ssb_bus *bus) dev->release = ssb_release_dev; dev->bus = &ssb_bustype; snprintf(dev->bus_id, sizeof(dev->bus_id), - "ssb%d:%d", bus->busnumber, dev_idx); + "ssb%u:%d", bus->busnumber, dev_idx); switch (bus->bustype) { case SSB_BUSTYPE_PCI: @@ -435,17 +435,6 @@ static int ssb_attach_queued_buses(void) return err; } -static void ssb_get_boardtype(struct ssb_bus *bus) -{//FIXME for pcmcia? - if (bus->bustype != SSB_BUSTYPE_PCI) { - /* Must set board_vendor, board_type and board_rev - * before calling ssb_bus_*_register() */ - assert(bus->board_vendor && bus->board_type); - return; - } - ssb_pci_get_boardtype(bus); -} - static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset) { struct ssb_bus *bus = dev->bus; @@ -485,7 +474,26 @@ static const struct ssb_bus_ops ssb_ssb_ops = { .write32 = ssb_ssb_write32, }; +static int ssb_fetch_invariants(struct ssb_bus *bus, + int (*get_invariants)(struct ssb_bus *bus, + struct ssb_init_invariants *iv)) +{ + struct ssb_init_invariants iv; + int err; + + memset(&iv, 0, sizeof(iv)); + err = get_invariants(bus, &iv); + if (err) + goto out; + memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo)); + memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom)); +out: + return err; +} + static int ssb_bus_register(struct ssb_bus *bus, + int (*get_invariants)(struct ssb_bus *bus, + struct ssb_init_invariants *iv), unsigned long baseaddr) { int err; @@ -493,13 +501,12 @@ static int ssb_bus_register(struct ssb_bus *bus, spin_lock_init(&bus->bar_lock); INIT_LIST_HEAD(&bus->list); - ssb_get_boardtype(bus); /* Powerup the bus */ err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); if (err) goto out; ssb_buses_lock(); - bus->busnumber = nr_buses; + bus->busnumber = next_busnumber; /* Scan for devices (cores) */ err = ssb_bus_scan(bus, baseaddr); if (err) @@ -517,6 +524,9 @@ static int ssb_bus_register(struct ssb_bus *bus, /* Initialize basic system devices (if available) */ ssb_chipcommon_init(&bus->chipco); ssb_mipscore_init(&bus->mipscore); + err = ssb_fetch_invariants(bus, get_invariants); + if (err) + goto err_pcmcia_exit; /* Queue it for attach */ list_add_tail(&bus->list, &attach_queue); @@ -526,7 +536,7 @@ static int ssb_bus_register(struct ssb_bus *bus, if (err) goto err_dequeue; } - nr_buses++; + next_busnumber++; ssb_buses_unlock(); out: @@ -534,7 +544,7 @@ out: err_dequeue: list_del(&bus->list); -/* err_pcmcia_exit: */ +err_pcmcia_exit: /* ssb_pcmcia_exit(bus); */ err_pci_exit: ssb_pci_exit(bus); @@ -556,7 +566,7 @@ int ssb_bus_pcibus_register(struct ssb_bus *bus, bus->host_pci = host_pci; bus->ops = &ssb_pci_ops; - err = ssb_bus_register(bus, 0); + err = ssb_bus_register(bus, ssb_pci_get_invariants, 0); if (!err) { ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " "PCI device %s\n", host_pci->dev.bus_id); @@ -570,17 +580,15 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); #ifdef CONFIG_SSB_PCMCIAHOST int ssb_bus_pcmciabus_register(struct ssb_bus *bus, struct pcmcia_device *pcmcia_dev, - unsigned long baseaddr, - void (*fill_sprom)(struct ssb_sprom *sprom)) + unsigned long baseaddr) { int err; bus->bustype = SSB_BUSTYPE_PCMCIA; bus->host_pcmcia = pcmcia_dev; bus->ops = &ssb_pcmcia_ops; - fill_sprom(&bus->sprom); - err = ssb_bus_register(bus, baseaddr); + err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr); if (!err) { ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " "PCMCIA device %s\n", pcmcia_dev->devname); @@ -593,15 +601,15 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register); int ssb_bus_ssbbus_register(struct ssb_bus *bus, unsigned long baseaddr, - void (*fill_sprom)(struct ssb_sprom *sprom)) + int (*get_invariants)(struct ssb_bus *bus, + struct ssb_init_invariants *iv)) { int err; bus->bustype = SSB_BUSTYPE_SSB; bus->ops = &ssb_ssb_ops; - fill_sprom(&bus->sprom); - err = ssb_bus_register(bus, baseaddr); + err = ssb_bus_register(bus, get_invariants, baseaddr); if (!err) { ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at " "address 0x%08lX\n", baseaddr); diff --git a/target/linux/brcm47xx-2.6/files/drivers/ssb/pci.c b/target/linux/brcm47xx-2.6/files/drivers/ssb/pci.c index fcd8e871cb..f9dc28f51f 100644 --- a/target/linux/brcm47xx-2.6/files/drivers/ssb/pci.c +++ b/target/linux/brcm47xx-2.6/files/drivers/ssb/pci.c @@ -330,12 +330,12 @@ static void sprom_extract_r1(struct ssb_sprom_r1 *out, const u16 *in) SPEX(gpio2, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P2, 0); SPEX(gpio3, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P3, SSB_SPROM1_GPIOB_P3_SHIFT); - SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A, 0); - SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, - SSB_SPROM1_MAXPWR_BG_SHIFT); - SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A, 0); - SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, - SSB_SPROM1_ITSSI_BG_SHIFT); + SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A, + SSB_SPROM1_MAXPWR_A_SHIFT); + SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, 0); + SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A, + SSB_SPROM1_ITSSI_A_SHIFT); + SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0); SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0); SPEX(antenna_gain_a, SSB_SPROM1_AGAIN, SSB_SPROM1_AGAIN_A, 0); SPEX(antenna_gain_bg, SSB_SPROM1_AGAIN, SSB_SPROM1_AGAIN_BG, @@ -407,7 +407,8 @@ static void sprom_extract_r3(struct ssb_sprom_r3 *out, const u16 *in) out->ofdmgpo |= (in[SPOFF(SSB_SPROM3_OFDMGPO) + 1] & 0x00FF) << 8; } -static int sprom_extract(struct ssb_sprom *out, const u16 *in) +static int sprom_extract(struct ssb_bus *bus, + struct ssb_sprom *out, const u16 *in) { memset(out, 0, sizeof(*out)); @@ -415,16 +416,23 @@ static int sprom_extract(struct ssb_sprom *out, const u16 *in) SPEX(crc, SSB_SPROM_REVISION, SSB_SPROM_REVISION_CRC, SSB_SPROM_REVISION_CRC_SHIFT); - if (out->revision == 0) - goto unsupported; - if (out->revision >= 1 && out->revision <= 3) + if ((bus->chip_id & 0xFF00) == 0x4400) { + /* Workaround: The BCM44XX chip has a stupid revision + * number stored in the SPROM. + * Always extract r1. */ sprom_extract_r1(&out->r1, in); - if (out->revision >= 2 && out->revision <= 3) - sprom_extract_r2(&out->r2, in); - if (out->revision == 3) - sprom_extract_r3(&out->r3, in); - if (out->revision >= 4) - goto unsupported; + } else { + if (out->revision == 0) + goto unsupported; + if (out->revision >= 1 && out->revision <= 3) + sprom_extract_r1(&out->r1, in); + if (out->revision >= 2 && out->revision <= 3) + sprom_extract_r2(&out->r2, in); + if (out->revision == 3) + sprom_extract_r3(&out->r3, in); + if (out->revision >= 4) + goto unsupported; + } return 0; unsupported: @@ -434,13 +442,12 @@ unsupported: return 0; } -int ssb_pci_sprom_get(struct ssb_bus *bus) +static int ssb_pci_sprom_get(struct ssb_bus *bus, + struct ssb_sprom *sprom) { int err = -ENOMEM; u16 *buf; - assert(bus->bustype == SSB_BUSTYPE_PCI); - buf = kcalloc(SSB_SPROMSIZE_WORDS, sizeof(u16), GFP_KERNEL); if (!buf) goto out; @@ -450,21 +457,36 @@ int ssb_pci_sprom_get(struct ssb_bus *bus) ssb_printk(KERN_WARNING PFX "WARNING: Invalid SPROM CRC (corrupt SPROM)\n"); } - err = sprom_extract(&bus->sprom, buf); + err = sprom_extract(bus, sprom, buf); kfree(buf); out: return err; } -void ssb_pci_get_boardtype(struct ssb_bus *bus) +static void ssb_pci_get_boardinfo(struct ssb_bus *bus, + struct ssb_boardinfo *bi) { pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID, - &bus->board_vendor); + &bi->vendor); pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID, - &bus->board_type); + &bi->type); pci_read_config_word(bus->host_pci, PCI_REVISION_ID, - &bus->board_rev); + &bi->rev); +} + +int ssb_pci_get_invariants(struct ssb_bus *bus, + struct ssb_init_invariants *iv) +{ + int err; + + err = ssb_pci_sprom_get(bus, &iv->sprom); + if (err) + goto out; + ssb_pci_get_boardinfo(bus, &iv->boardinfo); + +out: + return err; } static u16 ssb_pci_read16(struct ssb_device *dev, u16 offset) @@ -660,13 +682,7 @@ int ssb_pci_init(struct ssb_bus *bus) err = device_create_file(&pdev->dev, &dev_attr_ssb_sprom); if (err) goto out; - err = ssb_pci_sprom_get(bus); - if (err) - goto err_remove_sprom_file; out: return err; -err_remove_sprom_file: - device_remove_file(&pdev->dev, &dev_attr_ssb_sprom); - return err; } diff --git a/target/linux/brcm47xx-2.6/files/drivers/ssb/pcmcia.c b/target/linux/brcm47xx-2.6/files/drivers/ssb/pcmcia.c index 60cf5ad0f7..b9085633eb 100644 --- a/target/linux/brcm47xx-2.6/files/drivers/ssb/pcmcia.c +++ b/target/linux/brcm47xx-2.6/files/drivers/ssb/pcmcia.c @@ -222,6 +222,13 @@ const struct ssb_bus_ops ssb_pcmcia_ops = { .write32 = ssb_pcmcia_write32, }; +int ssb_pcmcia_get_invariants(struct ssb_bus *bus, + struct ssb_init_invariants *iv) +{ + //TODO + return 0; +} + int ssb_pcmcia_init(struct ssb_bus *bus) { conf_reg_t reg; diff --git a/target/linux/brcm47xx-2.6/files/drivers/ssb/scan.c b/target/linux/brcm47xx-2.6/files/drivers/ssb/scan.c index feaf1e57d0..b5d909c3a5 100644 --- a/target/linux/brcm47xx-2.6/files/drivers/ssb/scan.c +++ b/target/linux/brcm47xx-2.6/files/drivers/ssb/scan.c @@ -202,7 +202,11 @@ void ssb_iounmap(struct ssb_bus *bus) iounmap(bus->mmio); break; case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST pci_iounmap(bus->host_pci, bus->mmio); +#else + assert(0); /* Can't reach this code. */ +#endif break; } bus->mmio = NULL; @@ -222,7 +226,11 @@ static void __iomem * ssb_ioremap(struct ssb_bus *bus, mmio = ioremap(baseaddr, SSB_CORE_SIZE); break; case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST mmio = pci_iomap(bus->host_pci, 0, ~0UL); +#else + assert(0); /* Can't reach this code. */ +#endif break; } diff --git a/target/linux/brcm47xx-2.6/files/drivers/ssb/ssb_private.h b/target/linux/brcm47xx-2.6/files/drivers/ssb/ssb_private.h index ae1fc0633d..d00d186074 100644 --- a/target/linux/brcm47xx-2.6/files/drivers/ssb/ssb_private.h +++ b/target/linux/brcm47xx-2.6/files/drivers/ssb/ssb_private.h @@ -51,8 +51,8 @@ extern int ssb_pci_switch_coreidx(struct ssb_bus *bus, u8 coreidx); extern int ssb_pci_xtal(struct ssb_bus *bus, u32 what, int turn_on); -extern int ssb_pci_sprom_get(struct ssb_bus *bus); -extern void ssb_pci_get_boardtype(struct ssb_bus *bus); +extern int ssb_pci_get_invariants(struct ssb_bus *bus, + struct ssb_init_invariants *iv); extern void ssb_pci_exit(struct ssb_bus *bus); extern int ssb_pci_init(struct ssb_bus *bus); extern const struct ssb_bus_ops ssb_pci_ops; @@ -74,13 +74,6 @@ static inline int ssb_pci_xtal(struct ssb_bus *bus, u32 what, { return 0; } -static inline int ssb_pci_sprom_get(struct ssb_bus *bus) -{ - return 0; -} -static inline void ssb_pci_get_boardtype(struct ssb_bus *bus) -{ -} static inline void ssb_pci_exit(struct ssb_bus *bus) { } @@ -99,6 +92,8 @@ extern int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus, u8 coreidx); extern int ssb_pcmcia_switch_segment(struct ssb_bus *bus, u8 seg); +extern int ssb_pcmcia_get_invariants(struct ssb_bus *bus, + struct ssb_init_invariants *iv); extern int ssb_pcmcia_init(struct ssb_bus *bus); extern const struct ssb_bus_ops ssb_pcmcia_ops; #else /* CONFIG_SSB_PCMCIAHOST */ @@ -139,13 +134,4 @@ extern int ssb_devices_thaw(struct ssb_bus *bus); extern struct ssb_bus * ssb_pci_dev_to_bus(struct pci_dev *pdev); #endif /* CONFIG_SSB_PCIHOST */ - -/* Ceiling division helper. Divides x by y. */ -static inline -unsigned long ceildiv(unsigned long x, unsigned long y) -{ - return ((x + (y - 1)) / y); -} - - #endif /* LINUX_SSB_PRIVATE_H_ */ diff --git a/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb.h b/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb.h index 1ed3cbc1e5..a3d1f5114b 100644 --- a/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb.h +++ b/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb.h @@ -100,6 +100,13 @@ struct ssb_sprom { }; }; +/* Information about the PCB the circuitry is soldered on. */ +struct ssb_boardinfo { + u16 vendor; + u16 type; + u16 rev; +}; + struct ssb_device; /* Lowlevel read/write operations on the device MMIO. @@ -292,19 +299,11 @@ struct ssb_bus { struct mutex pci_sprom_mutex; #endif - /* ID information about the PCB. */ - u16 board_vendor; - u16 board_type; - u16 board_rev; /* ID information about the Chip. */ u16 chip_id; u16 chip_rev; u8 chip_package; - /* Contents of the SPROM. - * If there is no sprom (not on PCI-bus), this is emulated. */ - struct ssb_sprom sprom; - /* List of devices (cores) on the backplane. */ struct ssb_device devices[SSB_MAX_NR_CORES]; u8 nr_devices; @@ -313,7 +312,7 @@ struct ssb_bus { u8 suspend_cnt; /* Software ID number for this bus. */ - int busnumber; + unsigned int busnumber; /* The ChipCommon device (if available). */ struct ssb_chipcommon chipco; @@ -324,13 +323,34 @@ struct ssb_bus { /* The EXTif-core device (if available). */ struct ssb_extif extif; + /* The following structure elements are not available in early + * SSB initialization. Though, they are available for regular + * registered drivers at any stage. So be careful when + * using them in the ssb core code. */ + + /* ID information about the PCB. */ + struct ssb_boardinfo boardinfo; + /* Contents of the SPROM. */ + struct ssb_sprom sprom; + /* Internal. */ struct list_head list; }; +/* The initialization-invariants. */ +struct ssb_init_invariants { + struct ssb_boardinfo boardinfo; + struct ssb_sprom sprom; +}; + +/* Register a SSB system bus. get_invariants() is called after the + * basic system devices are initialized. + * The invariants are usually fetched from some NVRAM. + * Put the invariants into the struct pointed to by iv. */ extern int ssb_bus_ssbbus_register(struct ssb_bus *bus, unsigned long baseaddr, - void (*fill_sprom)(struct ssb_sprom *sprom)); + int (*get_invariants)(struct ssb_bus *bus, + struct ssb_init_invariants *iv)); #ifdef CONFIG_SSB_PCIHOST extern int ssb_bus_pcibus_register(struct ssb_bus *bus, struct pci_dev *host_pci); @@ -338,8 +358,7 @@ extern int ssb_bus_pcibus_register(struct ssb_bus *bus, #ifdef CONFIG_SSB_PCMCIAHOST extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus, struct pcmcia_device *pcmcia_dev, - unsigned long baseaddr, - void (*fill_sprom)(struct ssb_sprom *sprom)); + unsigned long baseaddr); #endif /* CONFIG_SSB_PCMCIAHOST */ extern void ssb_bus_unregister(struct ssb_bus *bus); diff --git a/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_regs.h b/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_regs.h index e1c7ff78a8..1fa4bf8a9d 100644 --- a/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_regs.h +++ b/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_regs.h @@ -201,16 +201,16 @@ #define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */ #define SSB_SPROM1_GPIOB_P3_SHIFT 8 #define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */ -#define SSB_SPROM1_MAXPWR_A 0x00FF /* A-PHY (in dBm Q5.2) */ -#define SSB_SPROM1_MAXPWR_BG 0xFF00 /* B-PHY and G-PHY (in dBm Q5.2) */ -#define SSB_SPROM1_MAXPWR_BG_SHIFT 8 +#define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */ +#define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */ +#define SSB_SPROM1_MAXPWR_A_SHIFT 8 #define SSB_SPROM1_PA1B0 0x106A #define SSB_SPROM1_PA1B1 0x106C #define SSB_SPROM1_PA1B2 0x106E #define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */ -#define SSB_SPROM1_ITSSI_A 0x00FF /* A-PHY */ -#define SSB_SPROM1_ITSSI_BG 0xFF00 /* B-PHY and G-PHY */ -#define SSB_SPROM1_ITSSI_BG_SHIFT 8 +#define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/ +#define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */ +#define SSB_SPROM1_ITSSI_A_SHIFT 8 #define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */ #define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */ #define SSB_SPROM1_AGAIN_A 0x00FF /* A-PHY */ diff --git a/target/linux/brcm47xx-2.6/patches-2.6.22/210-ssb_merge.patch b/target/linux/brcm47xx-2.6/patches-2.6.22/210-ssb_merge.patch index 21986b3426..fbf22cb85d 100644 --- a/target/linux/brcm47xx-2.6/patches-2.6.22/210-ssb_merge.patch +++ b/target/linux/brcm47xx-2.6/patches-2.6.22/210-ssb_merge.patch @@ -1,7 +1,7 @@ -Index: linux-2.6.22-rc4/drivers/ssb/driver_chipcommon.c +Index: linux-2.6.22-rc5/drivers/ssb/driver_chipcommon.c =================================================================== ---- linux-2.6.22-rc4.orig/drivers/ssb/driver_chipcommon.c 2007-06-10 21:32:11.000000000 +0100 -+++ linux-2.6.22-rc4/drivers/ssb/driver_chipcommon.c 2007-06-10 21:33:25.000000000 +0100 +--- linux-2.6.22-rc5.orig/drivers/ssb/driver_chipcommon.c 2007-06-21 23:04:38.000000000 +0100 ++++ linux-2.6.22-rc5/drivers/ssb/driver_chipcommon.c 2007-06-24 20:07:15.000000000 +0100 @@ -264,6 +264,31 @@ ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); } @@ -48,10 +48,10 @@ Index: linux-2.6.22-rc4/drivers/ssb/driver_chipcommon.c + return 0; +} +EXPORT_SYMBOL(ssb_chipco_watchdog); -Index: linux-2.6.22-rc4/drivers/ssb/driver_mipscore.c +Index: linux-2.6.22-rc5/drivers/ssb/driver_mipscore.c =================================================================== ---- linux-2.6.22-rc4.orig/drivers/ssb/driver_mipscore.c 2007-06-10 21:32:11.000000000 +0100 -+++ linux-2.6.22-rc4/drivers/ssb/driver_mipscore.c 2007-06-10 21:33:25.000000000 +0100 +--- linux-2.6.22-rc5.orig/drivers/ssb/driver_mipscore.c 2007-06-10 16:44:31.000000000 +0100 ++++ linux-2.6.22-rc5/drivers/ssb/driver_mipscore.c 2007-06-24 20:48:52.000000000 +0100 @@ -4,6 +4,7 @@ * * Copyright 2005, Broadcom Corporation @@ -116,16 +116,16 @@ Index: linux-2.6.22-rc4/drivers/ssb/driver_mipscore.c + extif_write32(extif, SSB_EXTIF_PROG_CFG, SSB_EXTCFG_EN); + + /* Set timing for the flash */ -+ tmp = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT; -+ tmp |= ceildiv(40, ns) << SSB_PROG_WCNT_1_SHIFT; -+ tmp |= ceildiv(120, ns); ++ tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; ++ tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT; ++ tmp |= DIV_ROUND_UP(120, ns); + extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp); + + /* Set programmable interface timing for external uart */ -+ tmp = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT; -+ tmp |= ceildiv(20, ns) << SSB_PROG_WCNT_2_SHIFT; -+ tmp |= ceildiv(100, ns) << SSB_PROG_WCNT_1_SHIFT; -+ tmp |= ceildiv(120, ns); ++ tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; ++ tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT; ++ tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; ++ tmp |= DIV_ROUND_UP(120, ns); + extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp); +} @@ -217,10 +217,10 @@ Index: linux-2.6.22-rc4/drivers/ssb/driver_mipscore.c } + +EXPORT_SYMBOL(ssb_mips_irq); -Index: linux-2.6.22-rc4/drivers/ssb/driver_pcicore.c +Index: linux-2.6.22-rc5/drivers/ssb/driver_pcicore.c =================================================================== ---- linux-2.6.22-rc4.orig/drivers/ssb/driver_pcicore.c 2007-06-10 21:32:11.000000000 +0100 -+++ linux-2.6.22-rc4/drivers/ssb/driver_pcicore.c 2007-06-10 21:33:25.000000000 +0100 +--- linux-2.6.22-rc5.orig/drivers/ssb/driver_pcicore.c 2007-06-10 16:44:31.000000000 +0100 ++++ linux-2.6.22-rc5/drivers/ssb/driver_pcicore.c 2007-06-24 20:07:15.000000000 +0100 @@ -93,6 +93,9 @@ /* Enable PCI bridge BAR1 prefetch and burst */ @@ -266,10 +266,10 @@ Index: linux-2.6.22-rc4/drivers/ssb/driver_pcicore.c register_pci_controller(&ssb_pcicore_controller); } -Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_chipcommon.h +Index: linux-2.6.22-rc5/include/linux/ssb/ssb_driver_chipcommon.h =================================================================== ---- linux-2.6.22-rc4.orig/include/linux/ssb/ssb_driver_chipcommon.h 2007-06-10 21:32:11.000000000 +0100 -+++ linux-2.6.22-rc4/include/linux/ssb/ssb_driver_chipcommon.h 2007-06-10 21:33:25.000000000 +0100 +--- linux-2.6.22-rc5.orig/include/linux/ssb/ssb_driver_chipcommon.h 2007-06-10 16:44:47.000000000 +0100 ++++ linux-2.6.22-rc5/include/linux/ssb/ssb_driver_chipcommon.h 2007-06-24 20:07:15.000000000 +0100 @@ -364,6 +364,8 @@ extern void ssb_chipco_suspend(struct ssb_chipcommon *cc, pm_message_t state); extern void ssb_chipco_resume(struct ssb_chipcommon *cc); @@ -326,10 +326,10 @@ Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_chipcommon.h #ifdef CONFIG_SSB_SERIAL extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc, struct ssb_serial_port *ports); -Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_extif.h +Index: linux-2.6.22-rc5/include/linux/ssb/ssb_driver_extif.h =================================================================== ---- linux-2.6.22-rc4.orig/include/linux/ssb/ssb_driver_extif.h 2007-06-10 21:32:11.000000000 +0100 -+++ linux-2.6.22-rc4/include/linux/ssb/ssb_driver_extif.h 2007-06-10 21:33:25.000000000 +0100 +--- linux-2.6.22-rc5.orig/include/linux/ssb/ssb_driver_extif.h 2007-06-10 16:44:47.000000000 +0100 ++++ linux-2.6.22-rc5/include/linux/ssb/ssb_driver_extif.h 2007-06-24 20:07:15.000000000 +0100 @@ -158,6 +158,36 @@ /* watchdog */ #define SSB_EXTIF_WATCHDOG_CLK 48000000 /* Hz */ @@ -367,10 +367,10 @@ Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_extif.h #endif /* __KERNEL__ */ #endif /* LINUX_SSB_EXTIFCORE_H_ */ -Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_mips.h +Index: linux-2.6.22-rc5/include/linux/ssb/ssb_driver_mips.h =================================================================== ---- linux-2.6.22-rc4.orig/include/linux/ssb/ssb_driver_mips.h 2007-06-10 21:32:11.000000000 +0100 -+++ linux-2.6.22-rc4/include/linux/ssb/ssb_driver_mips.h 2007-06-10 21:33:25.000000000 +0100 +--- linux-2.6.22-rc5.orig/include/linux/ssb/ssb_driver_mips.h 2007-06-10 16:44:47.000000000 +0100 ++++ linux-2.6.22-rc5/include/linux/ssb/ssb_driver_mips.h 2007-06-24 20:07:15.000000000 +0100 @@ -22,11 +22,13 @@ int nr_serial_ports; struct ssb_serial_port serial_ports[4]; @@ -385,11 +385,11 @@ Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_mips.h extern unsigned int ssb_mips_irq(struct ssb_device *dev); -Index: linux-2.6.22-rc4/include/linux/ssb/ssb.h +Index: linux-2.6.22-rc5/include/linux/ssb/ssb.h =================================================================== ---- linux-2.6.22-rc4.orig/include/linux/ssb/ssb.h 2007-06-10 21:32:11.000000000 +0100 -+++ linux-2.6.22-rc4/include/linux/ssb/ssb.h 2007-06-10 21:33:25.000000000 +0100 -@@ -263,6 +263,12 @@ +--- linux-2.6.22-rc5.orig/include/linux/ssb/ssb.h 2007-06-24 19:49:56.000000000 +0100 ++++ linux-2.6.22-rc5/include/linux/ssb/ssb.h 2007-06-24 20:07:15.000000000 +0100 +@@ -270,6 +270,12 @@ #define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */ #define SSB_CHIPPACK_BCM4712L 0 /* Large 340pin 4712 */ @@ -402,7 +402,7 @@ Index: linux-2.6.22-rc4/include/linux/ssb/ssb.h #include <linux/ssb/ssb_driver_chipcommon.h> #include <linux/ssb/ssb_driver_mips.h> #include <linux/ssb/ssb_driver_extif.h> -@@ -369,6 +375,16 @@ +@@ -388,6 +394,16 @@ dev->ops->write32(dev, offset, value); } diff --git a/target/linux/brcm47xx-2.6/patches-2.6.22/230-ssb_arch_setup.patch b/target/linux/brcm47xx-2.6/patches-2.6.22/230-ssb_arch_setup.patch new file mode 100644 index 0000000000..8e97364e7a --- /dev/null +++ b/target/linux/brcm47xx-2.6/patches-2.6.22/230-ssb_arch_setup.patch @@ -0,0 +1,33 @@ +Index: linux-2.6.22-rc5/arch/mips/bcm947xx/setup.c +=================================================================== +--- linux-2.6.22-rc5.orig/arch/mips/bcm947xx/setup.c 2007-06-24 19:51:21.000000000 +0100 ++++ linux-2.6.22-rc5/arch/mips/bcm947xx/setup.c 2007-06-24 20:26:12.000000000 +0100 +@@ -107,13 +107,27 @@ + sprom->r1.et1phyaddr = simple_strtoul(s, NULL, 10); + } + ++static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv) ++{ ++ char *s; ++ ++ // TODO ++ //iv->boardinfo.vendor = ++ if ((s = nvram_get("boardtype"))) ++ iv->boardinfo.type = (u16)simple_strtoul(s, NULL, 0); ++ if ((s = nvram_get("boardrev"))) ++ iv->boardinfo.rev = (u16)simple_strtoul(s, NULL, 0); ++ bcm47xx_fill_sprom(&iv->sprom); ++ return 0; ++} ++ + void __init plat_mem_setup(void) + { + int i, err; + char *s; + struct ssb_mipscore *mcore; + +- err = ssb_bus_ssbbus_register(&ssb, SSB_ENUM_BASE, bcm47xx_fill_sprom); ++ err = ssb_bus_ssbbus_register(&ssb, SSB_ENUM_BASE, bcm47xx_get_invariants); + if (err) { + const char *msg = "Failed to initialize SSB bus (err %d)\n"; + cfe_printk(msg, err); /* Make sure the message gets out of the box. */ |