diff options
Diffstat (limited to 'target')
11 files changed, 0 insertions, 592 deletions
diff --git a/target/linux/ar7/config-2.6.27 b/target/linux/ar7/config-2.6.27 deleted file mode 100644 index 2d74680c8b..0000000000 --- a/target/linux/ar7/config-2.6.27 +++ /dev/null @@ -1,143 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_AR7_GPIO=y -CONFIG_AR7_WDT=y -CONFIG_AR7=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_BASE_SMALL=0 -# CONFIG_BCM47XX is not set -CONFIG_BITREVERSE=y -CONFIG_BOOT_ELF32=y -CONFIG_CEVT_R4K=y -CONFIG_CLASSIC_RCU=y -CONFIG_CMDLINE="rootfstype=squashfs,jffs2" -CONFIG_CPMAC=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CSRC_R4K=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_FIXED_PHY=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_CLK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_HAVE_IDE=y -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_HW_RANDOM=y -# CONFIG_I2C is not set -# CONFIG_IDE is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQ_CPU=y -# CONFIG_ISDN is not set -CONFIG_KALLSYMS=y -CONFIG_LEDS_GPIO=y -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_MIKROTIK_RB532 is not set -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MIPS=y -CONFIG_MTD_AR7_PARTS=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -CONFIG_MTD_PHYSMAP_LEN=0 -CONFIG_MTD_PHYSMAP_START=0x10000000 -CONFIG_MTD_PHYSMAP=y -CONFIG_NO_EXCEPT_FILL=y -# CONFIG_NO_IOPORT is not set -CONFIG_PAGEFLAGS_EXTENDED=y -# CONFIG_PCSPKR_PLATFORM is not set -CONFIG_PHYLIB=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PROBE_INITRD_HEADER is not set -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_TICK_ONESHOT=y -CONFIG_TRAD_SIGNALS=y -# CONFIG_VGASTATE is not set -CONFIG_VLYNQ=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ar7/patches-2.6.27/100-board_support.patch b/target/linux/ar7/patches-2.6.27/100-board_support.patch deleted file mode 100644 index 58bd909fbc..0000000000 --- a/target/linux/ar7/patches-2.6.27/100-board_support.patch +++ /dev/null @@ -1,86 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -19,6 +19,24 @@ choice - prompt "System type" - default SGI_IP22 - -+config AR7 -+ bool "Texas Instruments AR7" -+ select BOOT_ELF32 -+ select DMA_NONCOHERENT -+ select CEVT_R4K -+ select CSRC_R4K -+ select IRQ_CPU -+ select NO_EXCEPT_FILL -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_KGDB -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select GENERIC_GPIO -+ select GENERIC_HARDIRQS_NO__DO_IRQ -+ - config MACH_ALCHEMY - bool "Alchemy processor based machines" - ---- a/arch/mips/kernel/traps.c -+++ b/arch/mips/kernel/traps.c -@@ -1203,9 +1203,22 @@ void *set_except_vector(int n, void *add - - exception_handlers[n] = handler; - if (n == 0 && cpu_has_divec) { -- *(u32 *)(ebase + 0x200) = 0x08000000 | -- (0x03ffffff & (handler >> 2)); -- local_flush_icache_range(ebase + 0x200, ebase + 0x204); -+ if ((handler ^ (ebase + 4)) & 0xfc000000) { -+ /* lui k0, 0x0000 */ -+ *(u32 *)(ebase + 0x200) = 0x3c1a0000 | (handler >> 16); -+ /* ori k0, 0x0000 */ -+ *(u32 *)(ebase + 0x204) = -+ 0x375a0000 | (handler & 0xffff); -+ /* jr k0 */ -+ *(u32 *)(ebase + 0x208) = 0x03400008; -+ /* nop */ -+ *(u32 *)(ebase + 0x20C) = 0x00000000; -+ flush_icache_range(ebase + 0x200, ebase + 0x210); -+ } else { -+ *(u32 *)(ebase + 0x200) = -+ 0x08000000 | (0x03ffffff & (handler >> 2)); -+ flush_icache_range(ebase + 0x200, ebase + 0x204); -+ } - } - return (void *)old_handler; - } ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -167,6 +167,13 @@ libs-$(CONFIG_SIBYTE_CFE) += arch/mips/s - # - - # -+# Texas Instruments AR7 -+# -+core-$(CONFIG_AR7) += arch/mips/ar7/ -+cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7 -+load-$(CONFIG_AR7) += 0xffffffff94100000 -+ -+# - # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. - # - core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ ---- a/include/asm-mips/page.h -+++ b/include/asm-mips/page.h -@@ -182,8 +182,10 @@ typedef struct { unsigned long pgprot; } - #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - --#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE) --#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET) -+#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \ -+ PHYS_OFFSET) -+#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \ -+ PHYS_OFFSET) - - #include <asm-generic/memory_model.h> - #include <asm-generic/page.h> diff --git a/target/linux/ar7/patches-2.6.27/110-flash.patch b/target/linux/ar7/patches-2.6.27/110-flash.patch deleted file mode 100644 index 60c7f335d5..0000000000 --- a/target/linux/ar7/patches-2.6.27/110-flash.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -188,6 +188,12 @@ config MTD_MYLOADER_PARTS - You will still need the parsing functions to be called by the driver - for your particular device. It won't happen automatically. - -+config MTD_AR7_PARTS -+ tristate "TI AR7 partitioning support" -+ depends on MTD_PARTITIONS -+ ---help--- -+ TI AR7 partitioning support -+ - comment "User Modules And Translation Layers" - - config MTD_CHAR ---- a/drivers/mtd/maps/physmap.c -+++ b/drivers/mtd/maps/physmap.c -@@ -85,7 +85,7 @@ static int physmap_flash_remove(struct p - - static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL }; - #ifdef CONFIG_MTD_PARTITIONS --static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; -+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL }; - #endif - - static int physmap_flash_probe(struct platform_device *dev) diff --git a/target/linux/ar7/patches-2.6.27/120-gpio_chrdev.patch b/target/linux/ar7/patches-2.6.27/120-gpio_chrdev.patch deleted file mode 100644 index 5df86ee6db..0000000000 --- a/target/linux/ar7/patches-2.6.27/120-gpio_chrdev.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/drivers/char/Kconfig -+++ b/drivers/char/Kconfig -@@ -968,6 +968,15 @@ config MWAVE - To compile this driver as a module, choose M here: the - module will be called mwave. - -+config AR7_GPIO -+ tristate "TI AR7 GPIO Support" -+ depends on AR7 -+ help -+ Give userspace access to the GPIO pins on the Texas Instruments AR7 -+ processors. -+ -+ If compiled as a module, it will be called ar7_gpio. -+ - config SCx200_GPIO - tristate "NatSemi SCx200 GPIO Support" - depends on SCx200 ---- a/drivers/char/Makefile -+++ b/drivers/char/Makefile -@@ -90,6 +90,7 @@ obj-$(CONFIG_HW_RANDOM) += hw_random/ - obj-$(CONFIG_PPDEV) += ppdev.o - obj-$(CONFIG_NWBUTTON) += nwbutton.o - obj-$(CONFIG_NWFLASH) += nwflash.o -+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o - obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o - obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o - obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o diff --git a/target/linux/ar7/patches-2.6.27/130-vlynq.patch b/target/linux/ar7/patches-2.6.27/130-vlynq.patch deleted file mode 100644 index 9ab3638eaa..0000000000 --- a/target/linux/ar7/patches-2.6.27/130-vlynq.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/Kconfig -+++ b/drivers/Kconfig -@@ -100,5 +100,7 @@ source "drivers/auxdisplay/Kconfig" - - source "drivers/uio/Kconfig" - -+source "drivers/vlynq/Kconfig" -+ - source "drivers/xen/Kconfig" - endmenu ---- a/drivers/Makefile -+++ b/drivers/Makefile -@@ -96,6 +96,7 @@ obj-$(CONFIG_DCA) += dca/ - obj-$(CONFIG_HID) += hid/ - obj-$(CONFIG_PPC_PS3) += ps3/ - obj-$(CONFIG_OF) += of/ -+obj-$(CONFIG_VLYNQ) += vlynq/ - obj-$(CONFIG_SSB) += ssb/ - obj-$(CONFIG_VIRTIO) += virtio/ - obj-$(CONFIG_REGULATOR) += regulator/ diff --git a/target/linux/ar7/patches-2.6.27/140-watchdog_bootcr.patch b/target/linux/ar7/patches-2.6.27/140-watchdog_bootcr.patch deleted file mode 100644 index 95535def0c..0000000000 --- a/target/linux/ar7/patches-2.6.27/140-watchdog_bootcr.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/watchdog/ar7_wdt.c 2009-01-25 01:17:01.000000000 +1300 -+++ b/drivers/watchdog/ar7_wdt.c 2009-01-25 01:19:15.000000000 +1300 -@@ -293,12 +293,26 @@ - .fops = &ar7_wdt_fops, - }; - -+#define AR7_WDT_HARDWARE_ENABLE 0x10 -+ - static int __init ar7_wdt_init(void) - { - int rc; -+ u32 *bootcr; -+ u32 bootcr_value; - - ar7_wdt_get_regs(); - -+ /* arch/mips/ar7/clocks.c is the only other thing that reads this */ -+ bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); -+ bootcr_value = *bootcr; -+ iounmap(bootcr); -+ -+ if (!(bootcr_value & AR7_WDT_HARDWARE_ENABLE)) { -+ printk(KERN_INFO DRVNAME ": watchdog disabled in hardware (bootcr=%#x)\n", bootcr_value); -+ return -ENODEV; -+ } -+ - if (!request_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt), - LONGNAME)) { - printk(KERN_WARNING DRVNAME ": watchdog I/O region busy\n"); diff --git a/target/linux/ar7/patches-2.6.27/150-cpmac_not_broken.patch b/target/linux/ar7/patches-2.6.27/150-cpmac_not_broken.patch deleted file mode 100644 index e43369bdec..0000000000 --- a/target/linux/ar7/patches-2.6.27/150-cpmac_not_broken.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -1823,7 +1823,7 @@ config SC92031 - - config CPMAC - tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)" -- depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN -+ depends on NET_ETHERNET && EXPERIMENTAL && AR7 - select PHYLIB - help - TI AR7 CPMAC Ethernet support diff --git a/target/linux/ar7/patches-2.6.27/160-cpmac_up_and_running.patch b/target/linux/ar7/patches-2.6.27/160-cpmac_up_and_running.patch deleted file mode 100644 index d11bbf2e58..0000000000 --- a/target/linux/ar7/patches-2.6.27/160-cpmac_up_and_running.patch +++ /dev/null @@ -1,47 +0,0 @@ ---- a/arch/mips/ar7/platform.c -+++ b/arch/mips/ar7/platform.c -@@ -33,6 +33,8 @@ - #include <linux/vlynq.h> - #include <linux/leds.h> - #include <linux/string.h> -+#include <linux/phy.h> -+#include <linux/phy_fixed.h> - - #include <asm/addrspace.h> - #include <asm/ar7/ar7.h> -@@ -205,6 +207,13 @@ - .width = 2, - }; - -+/* lets assume this is suitable for both high and low cpmacs links */ -+static struct fixed_phy_status fixed_phy_status __initdata = { -+ .link = 1, -+ .speed = 100, -+ .duplex = 1, -+}; -+ - static struct plat_cpmac_data cpmac_low_data = { - .reset_bit = 17, - .power_bit = 20, -@@ -506,6 +515,10 @@ - } - - if (ar7_has_high_cpmac()) { -+ res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status); -+ if (res && res != -ENODEV) -+ return res; -+ - cpmac_get_mac(1, cpmac_high_data.dev_addr); - res = platform_device_register(&cpmac_high); - if (res) -@@ -514,6 +527,10 @@ - cpmac_low_data.phy_mask = 0xffffffff; - } - -+ res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status); -+ if (res && res != -ENODEV) -+ return res; -+ - cpmac_get_mac(0, cpmac_low_data.dev_addr); - res = platform_device_register(&cpmac_low); - if (res) diff --git a/target/linux/ar7/patches-2.6.27/500-serial_kludge.patch b/target/linux/ar7/patches-2.6.27/500-serial_kludge.patch deleted file mode 100644 index e7a4b24472..0000000000 --- a/target/linux/ar7/patches-2.6.27/500-serial_kludge.patch +++ /dev/null @@ -1,40 +0,0 @@ ---- a/drivers/serial/8250.c -+++ b/drivers/serial/8250.c -@@ -264,6 +264,13 @@ static const struct serial8250_config ua - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, - }, -+ [PORT_AR7] = { -+ .name = "TI-AR7", -+ .fifo_size = 16, -+ .tx_loadsz = 16, -+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, -+ .flags = UART_CAP_FIFO | UART_CAP_AFE, -+ }, - }; - - #if defined (CONFIG_SERIAL_8250_AU1X00) -@@ -2552,7 +2559,11 @@ static void serial8250_console_putchar(s - { - struct uart_8250_port *up = (struct uart_8250_port *)port; - -+#ifdef CONFIG_AR7 -+ wait_for_xmitr(up, BOTH_EMPTY); -+#else - wait_for_xmitr(up, UART_LSR_THRE); -+#endif - serial_out(up, UART_TX, ch); - } - ---- a/include/linux/serial_core.h -+++ b/include/linux/serial_core.h -@@ -40,7 +40,8 @@ - #define PORT_NS16550A 14 - #define PORT_XSCALE 15 - #define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */ --#define PORT_MAX_8250 16 /* max port ID */ -+#define PORT_AR7 17 -+#define PORT_MAX_8250 17 /* max port ID */ - - /* - * ARM specific type numbers. These are not currently guaranteed diff --git a/target/linux/ar7/patches-2.6.27/900-cpmac_multiqueue.patch b/target/linux/ar7/patches-2.6.27/900-cpmac_multiqueue.patch deleted file mode 100644 index c604aa4c3f..0000000000 --- a/target/linux/ar7/patches-2.6.27/900-cpmac_multiqueue.patch +++ /dev/null @@ -1,70 +0,0 @@ -This patch fixes the network driver cpmac.c for compilation with -configuration option CONFIG_NETDEVICES_MULTIQUEUE. - -These compiler warnings are fixed by the patch: -drivers/net/cpmac.c: In function 'cpmac_end_xmit': -drivers/net/cpmac.c:630: warning: passing argument 2 of 'netif_subqueue_stopped' makes pointer from integer without a cast -drivers/net/cpmac.c:641: warning: passing argument 2 of 'netif_subqueue_stopped' makes pointer from integer without a cast -drivers/net/cpmac.c: In function 'cpmac_probe': -drivers/net/cpmac.c:1128: warning: unused variable 'i' - -During runtime, the unpatched driver raises a fatal runtime exception. -This is fixed by calling __netif_subqueue_stopped instead -of netif_subqueue_stopped, too. - -Two additional code parts were modified for CONFIG_NETDEVICES_MULTIQUEUE -because other drivers do it in the same way. - - Signed-off-by: Stefan Weil <weil@mail.berlios.de> - ---- a/drivers/net/cpmac.c -+++ b/drivers/net/cpmac.c -@@ -621,13 +621,13 @@ static void cpmac_end_xmit(struct net_de - - dev_kfree_skb_irq(desc->skb); - desc->skb = NULL; -- if (netif_subqueue_stopped(dev, queue)) -+ if (__netif_subqueue_stopped(dev, queue)) - netif_wake_subqueue(dev, queue); - } else { - if (netif_msg_tx_err(priv) && net_ratelimit()) - printk(KERN_WARNING - "%s: end_xmit: spurious interrupt\n", dev->name); -- if (netif_subqueue_stopped(dev, queue)) -+ if (__netif_subqueue_stopped(dev, queue)) - netif_wake_subqueue(dev, queue); - } - } -@@ -737,7 +737,6 @@ static void cpmac_clear_tx(struct net_de - - static void cpmac_hw_error(struct work_struct *work) - { -- int i; - struct cpmac_priv *priv = - container_of(work, struct cpmac_priv, reset_work); - -@@ -824,7 +823,6 @@ static irqreturn_t cpmac_irq(int irq, vo - - static void cpmac_tx_timeout(struct net_device *dev) - { -- int i; - struct cpmac_priv *priv = netdev_priv(dev); - - spin_lock(&priv->lock); -@@ -1103,7 +1101,7 @@ static int external_switch; - - static int __devinit cpmac_probe(struct platform_device *pdev) - { -- int rc, phy_id, i; -+ int rc, phy_id; - char *mdio_bus_id = "0"; - struct resource *mem; - struct cpmac_priv *priv; -@@ -1132,6 +1130,7 @@ static int __devinit cpmac_probe(struct - } - - dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES); -+ //~ dev = alloc_etherdev(sizeof(*priv)); - - if (!dev) { - printk(KERN_ERR "cpmac: Unable to allocate net_device\n"); diff --git a/target/linux/ar7/patches-2.6.27/910-cpmac_fixed_phy.patch b/target/linux/ar7/patches-2.6.27/910-cpmac_fixed_phy.patch deleted file mode 100644 index dd4bb76a35..0000000000 --- a/target/linux/ar7/patches-2.6.27/910-cpmac_fixed_phy.patch +++ /dev/null @@ -1,92 +0,0 @@ -This is a hack to make cpmac work with the external switch on a DG834 v3; it -should also work on other similar routers. It has not been tested on hardware -with multiple cpmac devices or with no external switch. It may be safer to -move external_switch to pdata rather than trying to detect it, and to set -phy_mask correctly rather than moving the phy search loop. - ---- a/drivers/net/cpmac.c 2008-11-11 06:18:24.000000000 +1100 -+++ b/drivers/net/cpmac.c 2009-04-11 10:58:58.000000000 +1000 -@@ -1124,8 +1124,8 @@ - - static int __devinit cpmac_probe(struct platform_device *pdev) - { - int rc, phy_id; -- char *mdio_bus_id = "0"; -+ char mdio_bus_id[BUS_ID_SIZE]; - struct resource *mem; - struct cpmac_priv *priv; - struct net_device *dev; -@@ -1134,22 +1134,23 @@ - - pdata = pdev->dev.platform_data; - -- for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { -- if (!(pdata->phy_mask & (1 << phy_id))) -- continue; -- if (!cpmac_mii.phy_map[phy_id]) -- continue; -- break; -+ if (external_switch || dumb_switch) { -+ strncpy(mdio_bus_id, "0", BUS_ID_SIZE); /* fixed phys bus */ -+ phy_id = pdev->id; -+ } else { -+ for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { -+ if (!(pdata->phy_mask & (1 << phy_id))) -+ continue; -+ if (!cpmac_mii.phy_map[phy_id]) -+ continue; -+ strncpy(mdio_bus_id, cpmac_mii.id, BUS_ID_SIZE); -+ break; -+ } - } - - if (phy_id == PHY_MAX_ADDR) { -- if (external_switch || dumb_switch) { -- mdio_bus_id = 0; /* fixed phys bus */ -- phy_id = pdev->id; -- } else { -- dev_err(&pdev->dev, "no PHY present\n"); -- return -ENODEV; -- } -+ dev_err(&pdev->dev, "no PHY present\n"); -+ return -ENODEV; - } - - #ifdef CONFIG_NETDEVICES_MULTIQUEUE -@@ -1189,9 +1190,11 @@ - priv->ring_size = 64; - priv->msg_enable = netif_msg_init(debug_level, 0xff); - memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr)); -+ -+ snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id); - -- priv->phy = phy_connect(dev, cpmac_mii.phy_map[phy_id]->dev.bus_id, -- &cpmac_adjust_link, 0, PHY_INTERFACE_MODE_MII); -+ priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0, -+ PHY_INTERFACE_MODE_MII); - if (IS_ERR(priv->phy)) { - if (netif_msg_drv(priv)) - printk(KERN_ERR "%s: Could not attach to PHY\n", -@@ -1250,11 +1253,11 @@ - - cpmac_mii.reset(&cpmac_mii); - -- for (i = 0; i < 300000; i++) -+ for (i = 0; i < 300; i++) - if ((mask = cpmac_read(cpmac_mii.priv, CPMAC_MDIO_ALIVE))) - break; - else -- cpu_relax(); -+ msleep(10); - - mask &= 0x7fffffff; - if (mask & (mask - 1)) { -@@ -1267,7 +1270,7 @@ - } - - cpmac_mii.phy_mask = ~(mask | 0x80000000); -- snprintf(cpmac_mii.id, MII_BUS_ID_SIZE, "0"); -+ snprintf(cpmac_mii.id, MII_BUS_ID_SIZE, "1"); - - res = mdiobus_register(&cpmac_mii); - if (res) |