diff options
Diffstat (limited to 'target')
8 files changed, 140 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 405e7c42ef..1ffa790569 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -41,6 +41,7 @@ case "$FIRMWARE" in rt2x00_eeprom_extract "devconf" 0 272 ;; + argus-atp52b | \ f5d8235v2 | \ fonera20n | \ hw550-3g | \ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 33ce13cb55..616e966976 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -10,6 +10,9 @@ ramips_board_name() { machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo) case "$machine" in + *"Argus ATP-52B") + name="argus-atp52b" + ;; *"Aztech HW550-3G") name="hw550-3g" ;; diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 8571f7a28a..baaff71faf 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -25,6 +25,7 @@ enum ramips_mach_type { RAMIPS_MACH_NW718, /* Netcore NW718 */ /* RT3052 based machines */ + RAMIPS_MACH_ARGUS_ATP52B, /* Argus ATP-52B */ RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */ RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */ RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index c24670e033..36b1515b3c 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -2,6 +2,12 @@ if RALINK_RT305X menu "Ralink RT350x machine selection" +config RT305X_MACH_ARGUS_ATP52B + bool "Argus ATP-52B support" + default y + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_RT_G32_REVB bool "Asus RT-G32 revB board support" default y diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index 2b1c59ea21..75f4782c23 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -11,6 +11,7 @@ obj-y := irq.o setup.o devices.o rt305x.o clock.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o obj-$(CONFIG_RT305X_MACH_FONERA20N) += mach-fonera20n.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c new file mode 100644 index 0000000000..bee06fd5f1 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c @@ -0,0 +1,114 @@ +/* + * Argus ATP-52B router support + * http://www.argus-co.com/english/productsview.php?id=70&cid=81 + * + * Copyright (C) 2011 Roman Yeryomin <roman@advem.lv> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define ARGUS_ATP52B_GPIO_LED_RUN 9 +#define ARGUS_ATP52B_GPIO_LED_NET 13 +#define ARGUS_ATP52B_GPIO_BUTTON_WPS 0 +#define ARGUS_ATP52B_GPIO_BUTTON_RESET 10 +#define ARGUS_ATP52B_BUTTONS_POLL_INTERVAL 20 + +static struct gpio_led argus_atp52b_leds_gpio[] __initdata = { + { + .name = "argus_atp52b:green:run", + .gpio = ARGUS_ATP52B_GPIO_LED_RUN, + .active_low = 1, + }, + { + .name = "argus_atp52b:amber:net", + .gpio = ARGUS_ATP52B_GPIO_LED_NET, + .active_low = 1, + } +}; + +static struct gpio_button argus_atp52b_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .threshold = 3, + .gpio = ARGUS_ATP52B_GPIO_BUTTON_WPS, + .active_low = 1, + }, + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .threshold = 10, + .gpio = ARGUS_ATP52B_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition argus_atp52b_partitions[] = { + { + .name = "bootloader", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "config", + .offset = 0x030000, + .size = 0x010000, + }, { + .name = "factory", + .offset = 0x040000, + .size = 0x010000, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x120000, + }, { + .name = "rootfs", + .offset = 0x170000, + .size = 0x680000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct physmap_flash_data argus_atp52b_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .nr_parts = ARRAY_SIZE(argus_atp52b_partitions), + .parts = argus_atp52b_partitions, +#endif +}; + +static void __init argus_atp52b_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_flash(0, &argus_atp52b_flash_data); + ramips_register_gpio_leds(-1, ARRAY_SIZE(argus_atp52b_leds_gpio), + argus_atp52b_leds_gpio); + ramips_register_gpio_buttons(-1, ARGUS_ATP52B_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(argus_atp52b_gpio_buttons), + argus_atp52b_gpio_buttons); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_ARGUS_ATP52B, "ARGUS_ATP52B", "Argus ATP-52B", + argus_atp52b_init); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 69543990f8..bbbf0e612b 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -199,6 +199,18 @@ define Image/Build/Profile/WCR150GN endef +mtdlayout_argus_atp52b=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware) +mtd_argus_atp52b_kernel_part_size=1179648 +mtd_argus_atp52b_rootfs_part_size=6815744 +define Image/Build/Template/ARGUS_ATP52B + $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_argus_atp52b,$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size)) +endef + +define Image/Build/Profile/ARGUS_ATP52B + $(call Image/Build/Template/ARGUS_ATP52B,$(1),argus_atp52b,ARGUS_ATP52B) +endef + + mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware) mtd_f5d8235_kernel_part_size=1572864 mtd_f5d8235_rootfs_part_size=6356992 @@ -213,6 +225,7 @@ endef ifeq ($(CONFIG_RALINK_RT305X),y) define Image/Build/Profile/Default + $(call Image/Build/Profile/ARGUS_ATP52B,$(1)) $(call Image/Build/Profile/DIR300B1,$(1)) $(call Image/Build/Profile/RTG32B1,$(1)) $(call Image/Build/Profile/FONERA20N,$(1)) diff --git a/target/linux/ramips/rt305x/config-2.6.39 b/target/linux/ramips/rt305x/config-2.6.39 index bd8887bfa6..5357652a8d 100644 --- a/target/linux/ramips/rt305x/config-2.6.39 +++ b/target/linux/ramips/rt305x/config-2.6.39 @@ -91,6 +91,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y # CONFIG_RALINK_RT288X is not set CONFIG_RALINK_RT305X=y CONFIG_RAMIPS_WDT=y +CONFIG_RT305X_MACH_ARGUS_ATP52B=y CONFIG_RT305X_MACH_DIR_300_REVB=y CONFIG_RT305X_MACH_F5D8235_V2=y CONFIG_RT305X_MACH_FONERA20N=y |