summaryrefslogtreecommitdiff
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/brcm47xx/base-files/etc/init.d/netconfig80
-rw-r--r--target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm2
-rw-r--r--target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm4
3 files changed, 43 insertions, 43 deletions
diff --git a/target/linux/brcm47xx/base-files/etc/init.d/netconfig b/target/linux/brcm47xx/base-files/etc/init.d/netconfig
index 3839f9f106..61bcb25ddd 100755
--- a/target/linux/brcm47xx/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm47xx/base-files/etc/init.d/netconfig
@@ -81,10 +81,10 @@ start() {
BEGIN {
FS="="
- c["lan_ifname"]="eth0.0"
- c["wan_ifname"]="eth0.1"
- c["vlan0ports"]="1 2 3 4 5"
- c["vlan1ports"]="0 5"
+ c["lan_ifname"]="eth0.1"
+ c["wan_ifname"]="eth0.2"
+ c["vlan1ports"]="1 2 3 4 5"
+ c["vlan2ports"]="0 5"
getline < "/proc/diag/model"
model=$0
for (i = 0; i < 6; i++) {
@@ -95,8 +95,8 @@ start() {
getline < "/proc/switch/eth0/cpuport"
cpuport=$0
if (cpuport == "8") {
- c["vlan0ports"]="1 2 3 4 8"
- c["vlan1ports"]="0 8"
+ c["vlan1ports"]="1 2 3 4 8"
+ c["vlan2ports"]="0 8"
}
}
}
@@ -109,13 +109,13 @@ start() {
END {
if (((nvram["vlan0ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8"))) || \
((nvram["vlan1ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan2ports"] ~ /^4 8/ && (cpuport == "8")))) {
- c["vlan0ports"] = "0 1 2 3 8"
- c["vlan1ports"] = "4 8"
+ c["vlan1ports"] = "0 1 2 3 8"
+ c["vlan2ports"] = "4 8"
}
if (((nvram["vlan0ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5"))) || \
((nvram["vlan1ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan2ports"] ~ /^4 5/ && (cpuport == "5")))) {
- c["vlan0ports"] = "0 1 2 3 5"
- c["vlan1ports"] = "4 5"
+ c["vlan1ports"] = "0 1 2 3 5"
+ c["vlan2ports"] = "4 5"
}
if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
c["wan_ifname"] = ""
@@ -123,23 +123,23 @@ start() {
}
if (model == "ASUS WL-330gE") {
c["wan_ifname"] = ""
- c["lan_ifname"] = "eth0.0"
- c["vlan0ports"] = "4 5"
- c["vlan1ports"] = ""
+ c["lan_ifname"] = "eth0.1"
+ c["vlan1ports"] = "4 5"
+ c["vlan2ports"] = ""
}
if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) {
c["wan_ifname"] = "eth1"
c["lan_ifname"] = "eth0"
}
if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) {
- c["vlan0ports"] = "0 1 2 3 5"
- c["vlan1ports"] = "4 5"
+ c["vlan1ports"] = "0 1 2 3 5"
+ c["vlan2ports"] = "4 5"
}
if (model == "Dell TrueMobile 2300") {
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
- c["vlan0ports"] = "0 1 2 3 4 5u"
- c["vlan1ports"] = ""
+ c["vlan1ports"] = "0 1 2 3 4 5u"
+ c["vlan2ports"] = ""
}
if (nvram["boardtype"] == "bcm94710r4") {
# Toshiba WRC-1000
@@ -147,18 +147,18 @@ start() {
c["wan_ifname"] = "eth1"
}
if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
- c["vlan0ports"] = "0 1 2 3 5"
- c["vlan1ports"] = "4 5"
+ c["vlan1ports"] = "0 1 2 3 5"
+ c["vlan2ports"] = "4 5"
}
if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
if (nvram["boardnum"] == "45") {
# WL-500gP
- c["vlan0ports"] = "1 2 3 4 5"
- c["vlan1ports"] = "0 5"
+ c["vlan1ports"] = "1 2 3 4 5"
+ c["vlan2ports"] = "0 5"
} else {
# Generic BCM94704
- c["vlan0ports"] = "0 1 2 3 4 5u"
- c["vlan1ports"] = ""
+ c["vlan1ports"] = "0 1 2 3 4 5u"
+ c["vlan2ports"] = ""
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
@@ -171,8 +171,8 @@ start() {
}
# Buffalo WBR-B11 and Buffalo WBR-G54
if (nvram["boardtype"] == "bcm94710ap") {
- c["vlan0ports"] = "0 1 2 3 4 5u"
- c["vlan1ports"] = ""
+ c["vlan1ports"] = "0 1 2 3 4 5u"
+ c["vlan2ports"] = ""
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
}
@@ -196,41 +196,41 @@ start() {
# Generic BCM94704 settings instead so we revert to proper settings here.
# Hopefully someone will fix this properly soon.
if (model == "ASUS WL-700gE") {
- c["lan_ifname"]="eth0.0"
- c["wan_ifname"]="eth0.1"
- c["vlan0ports"]="1 2 3 4 5"
- c["vlan1ports"]="0 5"
+ c["lan_ifname"]="eth0.1"
+ c["wan_ifname"]="eth0.2"
+ c["vlan1ports"]="1 2 3 4 5"
+ c["vlan2ports"]="0 5"
}
if ((model == "Motorola WR850G V2/V3") || (model == "Siemens SE505 V2")) {
- c["vlan0ports"]="0 1 2 3 5"
- c["vlan1ports"]="4 5"
+ c["vlan1ports"]="0 1 2 3 5"
+ c["vlan2ports"]="4 5"
}
if (model == "ASUS WL-500W") {
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
- c["vlan0ports"] = "0 1 2 3 4 5u"
- c["vlan1ports"] = ""
+ c["vlan1ports"] = "0 1 2 3 4 5u"
+ c["vlan2ports"] = ""
}
if (model == "OvisLink WL-1600GL") {
- c["lan_ifname"] = "eth0.0"
- c["wan_ifname"] = "eth0.1"
- c["vlan0ports"] = "0 1 2 3 5"
- c["vlan1ports"] = "4 5"
+ c["lan_ifname"] = "eth0.1"
+ c["wan_ifname"] = "eth0.2"
+ c["vlan1ports"] = "0 1 2 3 5"
+ c["vlan2ports"] = "4 5"
}
if (model == "SimpleTech SimpleShare NAS") {
c["lan_ifname"] = "eth0"
c["wan_ifname"] = ""
- c["vlan0ports"] = ""
c["vlan1ports"] = ""
+ c["vlan2ports"] = ""
}
- if (c["vlan0ports"] || c["vlan1ports"]) {
+ if (c["vlan1ports"] || c["vlan2ports"]) {
print "#### VLAN configuration "
print "config switch eth0"
print " option enable 1"
print ""
- vlan(0, "vlan0ports")
vlan(1, "vlan1ports")
+ vlan(2, "vlan2ports")
}
print "#### Loopback configuration"
print "config interface loopback"
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
index c7d0fc8da8..dd8fd6e9f6 100644
--- a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
+++ b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
@@ -3,7 +3,7 @@
failsafe_ip() {
[ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && {
ifconfig eth0 0.0.0.0 down
- echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+ echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports
}
[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
index 0a8915080f..8c425a094e 100644
--- a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
+++ b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
@@ -27,11 +27,11 @@ preinit_net_echo() {
# this would be easier if we blasted the message across all ports
# but we don't want packets leaking across interfaces
for port in $(seq 0 4); do {
- echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+ echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports
port_net_echo $1
}; done
- echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+ echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports
} || port_net_echo $1
}