diff options
Diffstat (limited to 'target/linux')
39 files changed, 0 insertions, 10657 deletions
diff --git a/target/linux/danube/Makefile b/target/linux/danube/Makefile deleted file mode 100644 index d079d6dc09..0000000000 --- a/target/linux/danube/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# -# Copyright (C) 2007 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk - -ARCH:=mips -BOARD:=danube -BOARDNAME:=Infineon Danube -FEATURES:=squashfs jffs2 broken -LINUX_VERSION:=2.6.23 - -include $(INCLUDE_DIR)/target.mk - -define Target/Description - Build firmware images for Infineon Danube -endef - -$(eval $(call BuildTarget)) diff --git a/target/linux/danube/base-files/etc/config/network b/target/linux/danube/base-files/etc/config/network deleted file mode 100644 index eb01cdd6c3..0000000000 --- a/target/linux/danube/base-files/etc/config/network +++ /dev/null @@ -1,14 +0,0 @@ -# Copyright (C) 2006 OpenWrt.org - -config interface loopback - option ifname lo - option proto static - option ipaddr 127.0.0.1 - option netmask 255.0.0.0 - -config interface lan - option ifname eth0 - #option type bridge - option proto static - option ipaddr 192.168.45.110 - option netmask 255.255.255.0 diff --git a/target/linux/danube/config-2.6.23 b/target/linux/danube/config-2.6.23 deleted file mode 100644 index 887519324f..0000000000 --- a/target/linux/danube/config-2.6.23 +++ /dev/null @@ -1,190 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_8139TOO is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_ATM is not set -CONFIG_BASE_SMALL=0 -CONFIG_BITREVERSE=y -# CONFIG_BT is not set -CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2 init=/etc/preinit" -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CRYPTO_HW is not set -CONFIG_DANUBE=y -CONFIG_DANUBE_ASC_UART=y -CONFIG_DANUBE_EEPROM=y -CONFIG_DANUBE_GPIO=y -CONFIG_DANUBE_LED=y -CONFIG_DANUBE_MII0=y -CONFIG_DANUBE_MII1=y -CONFIG_DANUBE_SSC=y -CONFIG_DANUBE_WDT=y -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_STD_PC_SERIAL_PORT=y -# CONFIG_HOSTAP is not set -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -# CONFIG_I2C is not set -# CONFIG_IDE is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQ_CPU=y -CONFIG_KALLSYMS=y -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MIPS=y -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_MTD_BLOCK2MTD is not set -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_CHAR=y -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_DANUBE=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_JEDECPROBE is not set -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_ONENAND is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PHRAM is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_START=0x0 -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NO_IOPORT is not set -# CONFIG_PAGE_SIZE_16KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_RTC is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_SCSI_WAIT_SCAN=m -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_DANUBE=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -# CONFIG_TC35815 is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_TRAD_SIGNALS=y -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_USB_EHCI_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USER_NS is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIA_RHINE is not set -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/danube/files/arch/mips/danube/Kconfig b/target/linux/danube/files/arch/mips/danube/Kconfig deleted file mode 100644 index 1c5ad72ca5..0000000000 --- a/target/linux/danube/files/arch/mips/danube/Kconfig +++ /dev/null @@ -1,36 +0,0 @@ -# copyright 2007 john crispin <blogic@openwrt.org> - -menu "Danube built-in" - -config DANUBE_ASC_UART - bool "Danube asc uart" - select SERIAL_CORE - select SERIAL_CORE_CONSOLE - default y - -config MTD_DANUBE - bool "Danube flash map" - default y - -config DANUBE_WDT - bool "Danube watchdog" - default y - -config DANUBE_LED - bool "Danube led" - default y - -config DANUBE_GPIO - bool "Danube gpio" - default y - -config DANUBE_SSC - bool "Danube ssc" - default y - -config DANUBE_EEPROM - bool "Danube eeprom" - default y - -endmenu - diff --git a/target/linux/danube/files/arch/mips/danube/Makefile b/target/linux/danube/files/arch/mips/danube/Makefile deleted file mode 100644 index fed8f2f45e..0000000000 --- a/target/linux/danube/files/arch/mips/danube/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# Copyright 2007 openwrt.org -# John Crispin <blogic@openwrt.org> -# -# Makefile for Infineon Danube -# -obj-y := reset.o prom.o setup.o interrupt.o dma-core.o - -obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_KGDB) += kgdb_serial.o diff --git a/target/linux/danube/files/arch/mips/danube/dma-core.c b/target/linux/danube/files/arch/mips/danube/dma-core.c deleted file mode 100644 index 7d29dbdc02..0000000000 --- a/target/linux/danube/files/arch/mips/danube/dma-core.c +++ /dev/null @@ -1,758 +0,0 @@ -#include <linux/module.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/fs.h> -#include <linux/errno.h> -#include <linux/stat.h> -#include <linux/mm.h> -#include <linux/tty.h> -#include <linux/selection.h> -#include <linux/kmod.h> -#include <linux/vmalloc.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <asm/uaccess.h> -#include <linux/errno.h> -#include <asm/io.h> - -#include <asm/danube/danube.h> -#include <asm/danube/danube_irq.h> -#include <asm/danube/danube_dma.h> -#include <asm/danube/danube_pmu.h> - -/*25 descriptors for each dma channel,4096/8/20=25.xx*/ -#define DANUBE_DMA_DESCRIPTOR_OFFSET 25 - -#define MAX_DMA_DEVICE_NUM 6 /*max ports connecting to dma */ -#define MAX_DMA_CHANNEL_NUM 20 /*max dma channels */ -#define DMA_INT_BUDGET 100 /*budget for interrupt handling */ -#define DMA_POLL_COUNTER 4 /*fix me, set the correct counter value here! */ - -extern void mask_and_ack_danube_irq (unsigned int irq_nr); -extern void enable_danube_irq (unsigned int irq_nr); -extern void disable_danube_irq (unsigned int irq_nr); - -u64 *g_desc_list; -_dma_device_info dma_devs[MAX_DMA_DEVICE_NUM]; -_dma_channel_info dma_chan[MAX_DMA_CHANNEL_NUM]; - -char global_device_name[MAX_DMA_DEVICE_NUM][20] = - { {"PPE"}, {"DEU"}, {"SPI"}, {"SDIO"}, {"MCTRL0"}, {"MCTRL1"} }; - -_dma_chan_map default_dma_map[MAX_DMA_CHANNEL_NUM] = { - {"PPE", DANUBE_DMA_RX, 0, DANUBE_DMA_CH0_INT, 0}, - {"PPE", DANUBE_DMA_TX, 0, DANUBE_DMA_CH1_INT, 0}, - {"PPE", DANUBE_DMA_RX, 1, DANUBE_DMA_CH2_INT, 1}, - {"PPE", DANUBE_DMA_TX, 1, DANUBE_DMA_CH3_INT, 1}, - {"PPE", DANUBE_DMA_RX, 2, DANUBE_DMA_CH4_INT, 2}, - {"PPE", DANUBE_DMA_TX, 2, DANUBE_DMA_CH5_INT, 2}, - {"PPE", DANUBE_DMA_RX, 3, DANUBE_DMA_CH6_INT, 3}, - {"PPE", DANUBE_DMA_TX, 3, DANUBE_DMA_CH7_INT, 3}, - {"DEU", DANUBE_DMA_RX, 0, DANUBE_DMA_CH8_INT, 0}, - {"DEU", DANUBE_DMA_TX, 0, DANUBE_DMA_CH9_INT, 0}, - {"DEU", DANUBE_DMA_RX, 1, DANUBE_DMA_CH10_INT, 1}, - {"DEU", DANUBE_DMA_TX, 1, DANUBE_DMA_CH11_INT, 1}, - {"SPI", DANUBE_DMA_RX, 0, DANUBE_DMA_CH12_INT, 0}, - {"SPI", DANUBE_DMA_TX, 0, DANUBE_DMA_CH13_INT, 0}, - {"SDIO", DANUBE_DMA_RX, 0, DANUBE_DMA_CH14_INT, 0}, - {"SDIO", DANUBE_DMA_TX, 0, DANUBE_DMA_CH15_INT, 0}, - {"MCTRL0", DANUBE_DMA_RX, 0, DANUBE_DMA_CH16_INT, 0}, - {"MCTRL0", DANUBE_DMA_TX, 0, DANUBE_DMA_CH17_INT, 0}, - {"MCTRL1", DANUBE_DMA_RX, 1, DANUBE_DMA_CH18_INT, 1}, - {"MCTRL1", DANUBE_DMA_TX, 1, DANUBE_DMA_CH19_INT, 1} -}; - -_dma_chan_map *chan_map = default_dma_map; -volatile u32 g_danube_dma_int_status = 0; -volatile int g_danube_dma_in_process = 0;/*0=not in process,1=in process*/ - -void do_dma_tasklet (unsigned long); -DECLARE_TASKLET (dma_tasklet, do_dma_tasklet, 0); - -u8* -common_buffer_alloc (int len, int *byte_offset, void **opt) -{ - u8 *buffer = (u8 *) kmalloc (len * sizeof (u8), GFP_KERNEL); - - *byte_offset = 0; - - return buffer; -} - -void -common_buffer_free (u8 *dataptr, void *opt) -{ - if (dataptr) - kfree(dataptr); -} - -void -enable_ch_irq (_dma_channel_info *pCh) -{ - int chan_no = (int)(pCh - dma_chan); - int flag; - - local_irq_save(flag); - writel(chan_no, DANUBE_DMA_CS); - writel(0x4a, DANUBE_DMA_CIE); - writel(readl(DANUBE_DMA_IRNEN) | (1 << chan_no), DANUBE_DMA_IRNEN); - local_irq_restore(flag); - enable_danube_irq(pCh->irq); -} - -void -disable_ch_irq (_dma_channel_info *pCh) -{ - int flag; - int chan_no = (int) (pCh - dma_chan); - - local_irq_save(flag); - g_danube_dma_int_status &= ~(1 << chan_no); - writel(chan_no, DANUBE_DMA_CS); - writel(0, DANUBE_DMA_CIE); - writel(readl(DANUBE_DMA_IRNEN) & ~(1 << chan_no), DANUBE_DMA_IRNEN); - local_irq_restore(flag); - mask_and_ack_danube_irq(pCh->irq); -} - -void -open_chan (_dma_channel_info *pCh) -{ - int flag; - int chan_no = (int)(pCh - dma_chan); - - local_irq_save(flag); - writel(chan_no, DANUBE_DMA_CS); - writel(readl(DANUBE_DMA_CCTRL) | 1, DANUBE_DMA_CCTRL); - if(pCh->dir == DANUBE_DMA_RX) - enable_ch_irq(pCh); - local_irq_restore(flag); -} - -void -close_chan(_dma_channel_info *pCh) -{ - int flag; - int chan_no = (int) (pCh - dma_chan); - - local_irq_save(flag); - writel(chan_no, DANUBE_DMA_CS); - writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL); - disable_ch_irq(pCh); - local_irq_restore(flag); -} - -void -reset_chan (_dma_channel_info *pCh) -{ - int chan_no = (int) (pCh - dma_chan); - - writel(chan_no, DANUBE_DMA_CS); - writel(readl(DANUBE_DMA_CCTRL) | 2, DANUBE_DMA_CCTRL); -} - -void -rx_chan_intr_handler (int chan_no) -{ - _dma_device_info *pDev = (_dma_device_info *)dma_chan[chan_no].dma_dev; - _dma_channel_info *pCh = &dma_chan[chan_no]; - struct rx_desc *rx_desc_p; - int tmp; - int flag; - - /*handle command complete interrupt */ - rx_desc_p = (struct rx_desc*)pCh->desc_base + pCh->curr_desc; - if (rx_desc_p->status.field.OWN == CPU_OWN - && rx_desc_p->status.field.C - && rx_desc_p->status.field.data_length < 1536){ - /*Every thing is correct, then we inform the upper layer */ - pDev->current_rx_chan = pCh->rel_chan_no; - if(pDev->intr_handler) - pDev->intr_handler(pDev, RCV_INT); - pCh->weight--; - } else { - local_irq_save(flag); - tmp = readl(DANUBE_DMA_CS); - writel(chan_no, DANUBE_DMA_CS); - writel(readl(DANUBE_DMA_CIS) | 0x7e, DANUBE_DMA_CIS); - writel(tmp, DANUBE_DMA_CS); - g_danube_dma_int_status &= ~(1 << chan_no); - local_irq_restore(flag); - enable_danube_irq(dma_chan[chan_no].irq); - } -} - -inline void -tx_chan_intr_handler (int chan_no) -{ - _dma_device_info *pDev = (_dma_device_info*)dma_chan[chan_no].dma_dev; - _dma_channel_info *pCh = &dma_chan[chan_no]; - int tmp; - int flag; - - local_irq_save(flag); - tmp = readl(DANUBE_DMA_CS); - writel(chan_no, DANUBE_DMA_CS); - writel(readl(DANUBE_DMA_CIS) | 0x7e, DANUBE_DMA_CIS); - writel(tmp, DANUBE_DMA_CS); - g_danube_dma_int_status &= ~(1 << chan_no); - local_irq_restore(flag); - pDev->current_tx_chan = pCh->rel_chan_no; - if (pDev->intr_handler) - pDev->intr_handler(pDev, TRANSMIT_CPT_INT); -} - -void -do_dma_tasklet (unsigned long unused) -{ - int i; - int chan_no = 0; - int budget = DMA_INT_BUDGET; - int weight = 0; - int flag; - - while (g_danube_dma_int_status) - { - if (budget-- < 0) - { - tasklet_schedule(&dma_tasklet); - return; - } - chan_no = -1; - weight = 0; - for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++) - { - if ((g_danube_dma_int_status & (1 << i)) && dma_chan[i].weight > 0) - { - if (dma_chan[i].weight > weight) - { - chan_no = i; - weight = dma_chan[chan_no].weight; - } - } - } - - if (chan_no >= 0) - { - if (chan_map[chan_no].dir == DANUBE_DMA_RX) - rx_chan_intr_handler(chan_no); - else - tx_chan_intr_handler(chan_no); - } else { - for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++) - { - dma_chan[i].weight = dma_chan[i].default_weight; - } - } - } - - local_irq_save(flag); - g_danube_dma_in_process = 0; - if (g_danube_dma_int_status) - { - g_danube_dma_in_process = 1; - tasklet_schedule(&dma_tasklet); - } - local_irq_restore(flag); -} - -irqreturn_t -dma_interrupt (int irq, void *dev_id) -{ - _dma_channel_info *pCh; - int chan_no = 0; - int tmp; - - pCh = (_dma_channel_info*)dev_id; - chan_no = (int)(pCh - dma_chan); - if (chan_no < 0 || chan_no > 19) - BUG(); - - tmp = readl(DANUBE_DMA_IRNEN); - writel(0, DANUBE_DMA_IRNEN); - g_danube_dma_int_status |= 1 << chan_no; - writel(tmp, DANUBE_DMA_IRNEN); - mask_and_ack_danube_irq(irq); - - if (!g_danube_dma_in_process) - { - g_danube_dma_in_process = 1; - tasklet_schedule(&dma_tasklet); - } - - return IRQ_HANDLED; -} - -_dma_device_info* -dma_device_reserve (char *dev_name) -{ - int i; - - for (i = 0; i < MAX_DMA_DEVICE_NUM; i++) - { - if (strcmp(dev_name, dma_devs[i].device_name) == 0) - { - if (dma_devs[i].reserved) - return NULL; - dma_devs[i].reserved = 1; - break; - } - } - - return &dma_devs[i]; -} - -void -dma_device_release (_dma_device_info *dev) -{ - dev->reserved = 0; -} - -void -dma_device_register(_dma_device_info *dev) -{ - int i, j; - int chan_no = 0; - u8 *buffer; - int byte_offset; - int flag; - _dma_device_info *pDev; - _dma_channel_info *pCh; - struct rx_desc *rx_desc_p; - struct tx_desc *tx_desc_p; - - for (i = 0; i < dev->max_tx_chan_num; i++) - { - pCh = dev->tx_chan[i]; - if (pCh->control == DANUBE_DMA_CH_ON) - { - chan_no = (int)(pCh - dma_chan); - for (j = 0; j < pCh->desc_len; j++) - { - tx_desc_p = (struct tx_desc*)pCh->desc_base + j; - memset(tx_desc_p, 0, sizeof(struct tx_desc)); - } - local_irq_save(flag); - writel(chan_no, DANUBE_DMA_CS); - /*check if the descriptor length is changed */ - if (readl(DANUBE_DMA_CDLEN) != pCh->desc_len) - writel(pCh->desc_len, DANUBE_DMA_CDLEN); - - writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL); - writel(readl(DANUBE_DMA_CCTRL) | 2, DANUBE_DMA_CCTRL); - while (readl(DANUBE_DMA_CCTRL) & 2){}; - writel(readl(DANUBE_DMA_IRNEN) | (1 << chan_no), DANUBE_DMA_IRNEN); - writel(0x30100, DANUBE_DMA_CCTRL); /*reset and enable channel,enable channel later */ - local_irq_restore(flag); - } - } - - for (i = 0; i < dev->max_rx_chan_num; i++) - { - pCh = dev->rx_chan[i]; - if (pCh->control == DANUBE_DMA_CH_ON) - { - chan_no = (int)(pCh - dma_chan); - - for (j = 0; j < pCh->desc_len; j++) - { - rx_desc_p = (struct rx_desc*)pCh->desc_base + j; - pDev = (_dma_device_info*)(pCh->dma_dev); - buffer = pDev->buffer_alloc(pCh->packet_size, &byte_offset, (void*)&(pCh->opt[j])); - if (!buffer) - break; - - dma_cache_inv((unsigned long) buffer, pCh->packet_size); - - rx_desc_p->Data_Pointer = (u32)CPHYSADDR((u32)buffer); - rx_desc_p->status.word = 0; - rx_desc_p->status.field.byte_offset = byte_offset; - rx_desc_p->status.field.OWN = DMA_OWN; - rx_desc_p->status.field.data_length = pCh->packet_size; - } - - local_irq_save(flag); - writel(chan_no, DANUBE_DMA_CS); - /*check if the descriptor length is changed */ - if (readl(DANUBE_DMA_CDLEN) != pCh->desc_len) - writel(pCh->desc_len, DANUBE_DMA_CDLEN); - writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL); - writel(readl(DANUBE_DMA_CCTRL) | 2, DANUBE_DMA_CCTRL); - while (readl(DANUBE_DMA_CCTRL) & 2){}; - writel(0x0a, DANUBE_DMA_CIE); /*fix me, should enable all the interrupts here? */ - writel(readl(DANUBE_DMA_IRNEN) | (1 << chan_no), DANUBE_DMA_IRNEN); - writel(0x30000, DANUBE_DMA_CCTRL); - local_irq_restore(flag); - enable_danube_irq(dma_chan[chan_no].irq); - } - } -} - -void -dma_device_unregister (_dma_device_info *dev) -{ - int i, j; - int chan_no; - _dma_channel_info *pCh; - struct rx_desc *rx_desc_p; - struct tx_desc *tx_desc_p; - int flag; - - for (i = 0; i < dev->max_tx_chan_num; i++) - { - pCh = dev->tx_chan[i]; - if (pCh->control == DANUBE_DMA_CH_ON) - { - chan_no = (int)(dev->tx_chan[i] - dma_chan); - local_irq_save (flag); - writel(chan_no, DANUBE_DMA_CS); - pCh->curr_desc = 0; - pCh->prev_desc = 0; - pCh->control = DANUBE_DMA_CH_OFF; - writel(0, DANUBE_DMA_CIE); /*fix me, should disable all the interrupts here? */ - writel(readl(DANUBE_DMA_IRNEN) & ~(1 << chan_no), DANUBE_DMA_IRNEN); /*disable interrupts */ - writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL); - while (readl(DANUBE_DMA_CCTRL) & 1) {}; - local_irq_restore (flag); - - for (j = 0; j < pCh->desc_len; j++) - { - tx_desc_p = (struct tx_desc*)pCh->desc_base + j; - if ((tx_desc_p->status.field.OWN == CPU_OWN && tx_desc_p->status.field.C) - || (tx_desc_p->status.field.OWN == DMA_OWN && tx_desc_p->status.field.data_length > 0)) - { - dev->buffer_free ((u8 *) __va (tx_desc_p->Data_Pointer), (void*)pCh->opt[j]); - } - tx_desc_p->status.field.OWN = CPU_OWN; - memset (tx_desc_p, 0, sizeof (struct tx_desc)); - } - //TODO should free buffer that is not transferred by dma - } - } - - for (i = 0; i < dev->max_rx_chan_num; i++) - { - pCh = dev->rx_chan[i]; - chan_no = (int)(dev->rx_chan[i] - dma_chan); - disable_danube_irq(pCh->irq); - - local_irq_save(flag); - g_danube_dma_int_status &= ~(1 << chan_no); - pCh->curr_desc = 0; - pCh->prev_desc = 0; - pCh->control = DANUBE_DMA_CH_OFF; - - writel(chan_no, DANUBE_DMA_CS); - writel(0, DANUBE_DMA_CIE); /*fix me, should disable all the interrupts here? */ - writel(readl(DANUBE_DMA_IRNEN) & ~(1 << chan_no), DANUBE_DMA_IRNEN); /*disable interrupts */ - writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL); - while (readl(DANUBE_DMA_CCTRL) & 1) {}; - - local_irq_restore (flag); - for (j = 0; j < pCh->desc_len; j++) - { - rx_desc_p = (struct rx_desc *) pCh->desc_base + j; - if ((rx_desc_p->status.field.OWN == CPU_OWN - && rx_desc_p->status.field.C) - || (rx_desc_p->status.field.OWN == DMA_OWN - && rx_desc_p->status.field.data_length > 0)) { - dev->buffer_free ((u8 *) - __va (rx_desc_p-> - Data_Pointer), - (void *) pCh->opt[j]); - } - } - } -} - -int -dma_device_read (struct dma_device_info *dma_dev, u8 ** dataptr, void **opt) -{ - u8 *buf; - int len; - int byte_offset = 0; - void *p = NULL; - _dma_channel_info *pCh = dma_dev->rx_chan[dma_dev->current_rx_chan]; - struct rx_desc *rx_desc_p; - - /*get the rx data first */ - rx_desc_p = (struct rx_desc *) pCh->desc_base + pCh->curr_desc; - if (!(rx_desc_p->status.field.OWN == CPU_OWN && rx_desc_p->status.field.C)) - { - return 0; - } - - buf = (u8 *) __va (rx_desc_p->Data_Pointer); - *(u32*)dataptr = (u32)buf; - len = rx_desc_p->status.field.data_length; - - if (opt) - { - *(int*)opt = (int)pCh->opt[pCh->curr_desc]; - } - - /*replace with a new allocated buffer */ - buf = dma_dev->buffer_alloc(pCh->packet_size, &byte_offset, &p); - - if (buf) - { - dma_cache_inv ((unsigned long) buf, - pCh->packet_size); - pCh->opt[pCh->curr_desc] = p; - wmb (); - - rx_desc_p->Data_Pointer = (u32) CPHYSADDR ((u32) buf); - rx_desc_p->status.word = (DMA_OWN << 31) | ((byte_offset) << 23) | pCh->packet_size; - wmb (); - } else { - *(u32 *) dataptr = 0; - if (opt) - *(int *) opt = 0; - len = 0; - } - - /*increase the curr_desc pointer */ - pCh->curr_desc++; - if (pCh->curr_desc == pCh->desc_len) - pCh->curr_desc = 0; - - return len; -} - -int -dma_device_write (struct dma_device_info *dma_dev, u8 * dataptr, int len, void *opt) -{ - int flag; - u32 tmp, byte_offset; - _dma_channel_info *pCh; - int chan_no; - struct tx_desc *tx_desc_p; - local_irq_save (flag); - - pCh = dma_dev->tx_chan[dma_dev->current_tx_chan]; - chan_no = (int)(pCh - (_dma_channel_info *) dma_chan); - - tx_desc_p = (struct tx_desc*)pCh->desc_base + pCh->prev_desc; - while (tx_desc_p->status.field.OWN == CPU_OWN && tx_desc_p->status.field.C) - { - dma_dev->buffer_free((u8 *) __va (tx_desc_p->Data_Pointer), pCh->opt[pCh->prev_desc]); - memset(tx_desc_p, 0, sizeof (struct tx_desc)); - pCh->prev_desc = (pCh->prev_desc + 1) % (pCh->desc_len); - tx_desc_p = (struct tx_desc*)pCh->desc_base + pCh->prev_desc; - } - tx_desc_p = (struct tx_desc*)pCh->desc_base + pCh->curr_desc; - /*Check whether this descriptor is available */ - if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C) - { - /*if not , the tell the upper layer device */ - dma_dev->intr_handler (dma_dev, TX_BUF_FULL_INT); - local_irq_restore(flag); - printk (KERN_INFO "%s %d: failed to write!\n", __func__, __LINE__); - - return 0; - } - pCh->opt[pCh->curr_desc] = opt; - /*byte offset----to adjust the starting address of the data buffer, should be multiple of the burst length. */ - byte_offset = ((u32) CPHYSADDR ((u32) dataptr)) % ((dma_dev->tx_burst_len) * 4); - dma_cache_wback ((unsigned long) dataptr, len); - wmb (); - tx_desc_p->Data_Pointer = (u32) CPHYSADDR ((u32) dataptr) - byte_offset; - wmb (); - tx_desc_p->status.word = (DMA_OWN << 31) | DMA_DESC_SOP_SET | DMA_DESC_EOP_SET | ((byte_offset) << 23) | len; - wmb (); - - pCh->curr_desc++; - if (pCh->curr_desc == pCh->desc_len) - pCh->curr_desc = 0; - - /*Check whether this descriptor is available */ - tx_desc_p = (struct tx_desc *) pCh->desc_base + pCh->curr_desc; - if (tx_desc_p->status.field.OWN == DMA_OWN) - { - /*if not , the tell the upper layer device */ - dma_dev->intr_handler (dma_dev, TX_BUF_FULL_INT); - } - - writel(chan_no, DANUBE_DMA_CS); - tmp = readl(DANUBE_DMA_CCTRL); - - if (!(tmp & 1)) - pCh->open (pCh); - - local_irq_restore (flag); - - return len; -} - -int -map_dma_chan(_dma_chan_map *map) -{ - int i, j; - int result; - - for (i = 0; i < MAX_DMA_DEVICE_NUM; i++) - { - strcpy(dma_devs[i].device_name, global_device_name[i]); - } - - for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++) - { - dma_chan[i].irq = map[i].irq; - result = request_irq(dma_chan[i].irq, dma_interrupt, SA_INTERRUPT, "dma-core", (void*)&dma_chan[i]); - if (result) - { - printk("error, cannot get dma_irq!\n"); - free_irq(dma_chan[i].irq, (void *) &dma_interrupt); - - return -EFAULT; - } - } - - for (i = 0; i < MAX_DMA_DEVICE_NUM; i++) - { - dma_devs[i].num_tx_chan = 0; /*set default tx channel number to be one */ - dma_devs[i].num_rx_chan = 0; /*set default rx channel number to be one */ - dma_devs[i].max_rx_chan_num = 0; - dma_devs[i].max_tx_chan_num = 0; - dma_devs[i].buffer_alloc = &common_buffer_alloc; - dma_devs[i].buffer_free = &common_buffer_free; - dma_devs[i].intr_handler = NULL; - dma_devs[i].tx_burst_len = 4; - dma_devs[i].rx_burst_len = 4; - if (i == 0) - { - writel(0, DANUBE_DMA_PS); - writel(readl(DANUBE_DMA_PCTRL) | ((0xf << 8) | (1 << 6)), DANUBE_DMA_PCTRL); /*enable dma drop */ - } - - if (i == 1) - { - writel(1, DANUBE_DMA_PS); - writel(0x14, DANUBE_DMA_PCTRL); /*deu port setting */ - } - - for (j = 0; j < MAX_DMA_CHANNEL_NUM; j++) - { - dma_chan[j].byte_offset = 0; - dma_chan[j].open = &open_chan; - dma_chan[j].close = &close_chan; - dma_chan[j].reset = &reset_chan; - dma_chan[j].enable_irq = &enable_ch_irq; - dma_chan[j].disable_irq = &disable_ch_irq; - dma_chan[j].rel_chan_no = map[j].rel_chan_no; - dma_chan[j].control = DANUBE_DMA_CH_OFF; - dma_chan[j].default_weight = DANUBE_DMA_CH_DEFAULT_WEIGHT; - dma_chan[j].weight = dma_chan[j].default_weight; - dma_chan[j].curr_desc = 0; - dma_chan[j].prev_desc = 0; - } - - for (j = 0; j < MAX_DMA_CHANNEL_NUM; j++) - { - if (strcmp(dma_devs[i].device_name, map[j].dev_name) == 0) - { - if (map[j].dir == DANUBE_DMA_RX) - { - dma_chan[j].dir = DANUBE_DMA_RX; - dma_devs[i].max_rx_chan_num++; - dma_devs[i].rx_chan[dma_devs[i].max_rx_chan_num - 1] = &dma_chan[j]; - dma_devs[i].rx_chan[dma_devs[i].max_rx_chan_num - 1]->pri = map[j].pri; - dma_chan[j].dma_dev = (void*)&dma_devs[i]; - } else if(map[j].dir == DANUBE_DMA_TX) - { /*TX direction */ - dma_chan[j].dir = DANUBE_DMA_TX; - dma_devs[i].max_tx_chan_num++; - dma_devs[i].tx_chan[dma_devs[i].max_tx_chan_num - 1] = &dma_chan[j]; - dma_devs[i].tx_chan[dma_devs[i].max_tx_chan_num - 1]->pri = map[j].pri; - dma_chan[j].dma_dev = (void*)&dma_devs[i]; - } else { - printk ("WRONG DMA MAP!\n"); - } - } - } - } - - return 0; -} - -void -dma_chip_init(void) -{ - int i; - - // enable DMA from PMU - danube_pmu_enable(DANUBE_PMU_PWDCR_DMA); - - // reset DMA - writel(readl(DANUBE_DMA_CTRL) | 1, DANUBE_DMA_CTRL); - - // diable all interrupts - writel(0, DANUBE_DMA_IRNEN); - - for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++) - { - writel(i, DANUBE_DMA_CS); - writel(0x2, DANUBE_DMA_CCTRL); - writel(0x80000040, DANUBE_DMA_CPOLL); - writel(readl(DANUBE_DMA_CCTRL) & ~0x1, DANUBE_DMA_CCTRL); - - } -} - -int -danube_dma_init (void) -{ - int i; - - dma_chip_init(); - if (map_dma_chan(default_dma_map)) - BUG(); - - g_desc_list = (u64*)KSEG1ADDR(__get_free_page(GFP_DMA)); - - if (g_desc_list == NULL) - { - printk("no memory for desriptor\n"); - return -ENOMEM; - } - - memset(g_desc_list, 0, PAGE_SIZE); - - for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++) - { - dma_chan[i].desc_base = (u32)g_desc_list + i * DANUBE_DMA_DESCRIPTOR_OFFSET * 8; - dma_chan[i].curr_desc = 0; - dma_chan[i].desc_len = DANUBE_DMA_DESCRIPTOR_OFFSET; - - writel(i, DANUBE_DMA_CS); - writel((u32)CPHYSADDR(dma_chan[i].desc_base), DANUBE_DMA_CDBA); - writel(dma_chan[i].desc_len, DANUBE_DMA_CDLEN); - } - - return 0; -} - -arch_initcall(danube_dma_init); - -void -dma_cleanup(void) -{ - int i; - - free_page(KSEG0ADDR((unsigned long) g_desc_list)); - for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++) - free_irq(dma_chan[i].irq, (void*)&dma_interrupt); -} - -EXPORT_SYMBOL (dma_device_reserve); -EXPORT_SYMBOL (dma_device_release); -EXPORT_SYMBOL (dma_device_register); -EXPORT_SYMBOL (dma_device_unregister); -EXPORT_SYMBOL (dma_device_read); -EXPORT_SYMBOL (dma_device_write); - -MODULE_LICENSE ("GPL"); diff --git a/target/linux/danube/files/arch/mips/danube/interrupt.c b/target/linux/danube/files/arch/mips/danube/interrupt.c deleted file mode 100644 index c266608ea2..0000000000 --- a/target/linux/danube/files/arch/mips/danube/interrupt.c +++ /dev/null @@ -1,219 +0,0 @@ -/* - * arch/mips/danube/interrupt.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2005 Wu Qi Ming infineon - * - * Rewrite of Infineon Danube code, thanks to infineon for the support, - * software and hardware - * - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ - -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> - -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/danube/danube.h> -#include <asm/danube/danube_irq.h> -#include <asm/irq_cpu.h> - - -void -disable_danube_irq (unsigned int irq_nr) -{ - int i; - u32 *danube_ier = DANUBE_ICU_IM0_IER; - - irq_nr -= INT_NUM_IRQ0; - for (i = 0; i <= 4; i++) - { - if (irq_nr < INT_NUM_IM_OFFSET){ - writel(readl(danube_ier) & ~(1 << irq_nr ), danube_ier); - return; - } - danube_ier += DANUBE_ICU_OFFSET; - irq_nr -= INT_NUM_IM_OFFSET; - } -} -EXPORT_SYMBOL (disable_danube_irq); - -void -mask_and_ack_danube_irq (unsigned int irq_nr) -{ - int i; - u32 *danube_ier = DANUBE_ICU_IM0_IER; - u32 *danube_isr = DANUBE_ICU_IM0_ISR; - - irq_nr -= INT_NUM_IRQ0; - for (i = 0; i <= 4; i++) - { - if (irq_nr < INT_NUM_IM_OFFSET) - { - writel(readl(danube_ier) & ~(1 << irq_nr ), danube_ier); - writel((1 << irq_nr ), danube_isr); - return; - } - danube_ier += DANUBE_ICU_OFFSET; - danube_isr += DANUBE_ICU_OFFSET; - irq_nr -= INT_NUM_IM_OFFSET; - } -} -EXPORT_SYMBOL (mask_and_ack_danube_irq); - -void -enable_danube_irq (unsigned int irq_nr) -{ - int i; - u32 *danube_ier = DANUBE_ICU_IM0_IER; - - irq_nr -= INT_NUM_IRQ0; - for (i = 0; i <= 4; i++) - { - if (irq_nr < INT_NUM_IM_OFFSET) - { - writel(readl(danube_ier) | (1 << irq_nr ), danube_ier); - return; - } - danube_ier += DANUBE_ICU_OFFSET; - irq_nr -= INT_NUM_IM_OFFSET; - } -} -EXPORT_SYMBOL (enable_danube_irq); - -static unsigned int -startup_danube_irq (unsigned int irq) -{ - enable_danube_irq (irq); - return 0; -} - -static void -end_danube_irq (unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - enable_danube_irq (irq); -} - -static struct hw_interrupt_type danube_irq_type = { - "DANUBE", - .startup = startup_danube_irq, - .enable = enable_danube_irq, - .disable = disable_danube_irq, - .unmask = enable_danube_irq, - .ack = end_danube_irq, - .mask = disable_danube_irq, - .mask_ack = mask_and_ack_danube_irq, - .end = end_danube_irq, -}; - -static inline int -ls1bit32(unsigned long x) -{ - __asm__ ( - " .set push \n" - " .set mips32 \n" - " clz %0, %1 \n" - " .set pop \n" - : "=r" (x) - : "r" (x)); - - return 31 - x; -} - -void -danube_hw_irqdispatch (int module) -{ - u32 irq; - - irq = readl(DANUBE_ICU_IM0_IOSR + (module * DANUBE_ICU_OFFSET)); - if (irq == 0) - return; - - irq = ls1bit32 (irq); - do_IRQ ((int) irq + INT_NUM_IM0_IRL0 + (INT_NUM_IM_OFFSET * module)); - - if ((irq == 22) && (module == 0)){ - writel(readl(DANUBE_EBU_PCC_ISTAT) | 0x10, DANUBE_EBU_PCC_ISTAT); - } -} - -asmlinkage void -plat_irq_dispatch (void) -{ - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; - unsigned int i; - - if (pending & CAUSEF_IP7){ - do_IRQ(MIPS_CPU_TIMER_IRQ); - goto out; - } else { - for (i = 0; i < 5; i++) - { - if (pending & (CAUSEF_IP2 << i)) - { - danube_hw_irqdispatch(i); - goto out; - } - } - } - printk("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status()); - -out: - return; -} - -static struct irqaction cascade = { - .handler = no_action, - .flags = IRQF_DISABLED, - .name = "cascade", -}; - -void __init -arch_init_irq(void) -{ - int i; - - for (i = 0; i < 5; i++) - { - writel(0, DANUBE_ICU_IM0_IER + (i * DANUBE_ICU_OFFSET)); - } - - mips_cpu_irq_init(); - - for (i = 2; i <= 6; i++) - { - setup_irq(i, &cascade); - } - - for (i = INT_NUM_IRQ0; i <= (INT_NUM_IRQ0 + (5 * INT_NUM_IM_OFFSET)); i++) - { -#if 0 - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; -#endif - set_irq_chip_and_handler(i, &danube_irq_type, handle_level_irq); - } - - set_c0_status (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5); -} diff --git a/target/linux/danube/files/arch/mips/danube/pci.c b/target/linux/danube/files/arch/mips/danube/pci.c deleted file mode 100644 index 1896336d81..0000000000 --- a/target/linux/danube/files/arch/mips/danube/pci.c +++ /dev/null @@ -1,319 +0,0 @@ -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/mm.h> -#include <asm/danube/danube.h> -#include <asm/danube/danube_irq.h> -#include <asm/addrspace.h> -#include <linux/vmalloc.h> - -#define DANUBE_PCI_MEM_BASE 0x18000000 -#define DANUBE_PCI_MEM_SIZE 0x02000000 -#define DANUBE_PCI_IO_BASE 0x1AE00000 -#define DANUBE_PCI_IO_SIZE 0x00200000 - -#define DANUBE_PCI_CFG_BUSNUM_SHF 16 -#define DANUBE_PCI_CFG_DEVNUM_SHF 11 -#define DANUBE_PCI_CFG_FUNNUM_SHF 8 - -#define PCI_ACCESS_READ 0 -#define PCI_ACCESS_WRITE 1 - -static int danube_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val); -static int danube_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val); - -struct pci_ops danube_pci_ops = { - .read = danube_pci_read_config_dword, - .write = danube_pci_write_config_dword -}; - -static struct resource pci_io_resource = { - .name = "io pci IO space", - .start = DANUBE_PCI_IO_BASE, - .end = DANUBE_PCI_IO_BASE + DANUBE_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource pci_mem_resource = { - .name = "ext pci memory space", - .start = DANUBE_PCI_MEM_BASE, - .end = DANUBE_PCI_MEM_BASE + DANUBE_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -static struct pci_controller danube_pci_controller = { - .pci_ops = &danube_pci_ops, - .mem_resource = &pci_mem_resource, - .mem_offset = 0x00000000UL, - .io_resource = &pci_io_resource, - .io_offset = 0x00000000UL, -}; - -static u32 danube_pci_mapped_cfg; - -static int -danube_pci_config_access(unsigned char access_type, - struct pci_bus *bus, unsigned int devfn, unsigned int where, u32 *data) -{ - unsigned long cfg_base; - unsigned long flags; - - u32 temp; - - /* Danube support slot from 0 to 15 */ - /* dev_fn 0&0x68 (AD29) is danube itself */ - if ((bus->number != 0) || ((devfn & 0xf8) > 0x78) - || ((devfn & 0xf8) == 0) || ((devfn & 0xf8) == 0x68)) - return 1; - - local_irq_save(flags); - - cfg_base = danube_pci_mapped_cfg; - cfg_base |= (bus->number << DANUBE_PCI_CFG_BUSNUM_SHF) | (devfn << - DANUBE_PCI_CFG_FUNNUM_SHF) | (where & ~0x3); - - /* Perform access */ - if (access_type == PCI_ACCESS_WRITE) - { -#ifdef CONFIG_DANUBE_PCI_HW_SWAP - writel(swab32(*data), ((u32*)cfg_base)); -#else - writel(*data, ((u32*)cfg_base)); -#endif - } else { - *data = readl(((u32*)(cfg_base))); -#ifdef CONFIG_DANUBE_PCI_HW_SWAP - *data = swab32(*data); -#endif - } - wmb(); - - /* clean possible Master abort */ - cfg_base = (danube_pci_mapped_cfg | (0x0 << DANUBE_PCI_CFG_FUNNUM_SHF)) + 4; - temp = readl(((u32*)(cfg_base))); -#ifdef CONFIG_DANUBE_PCI_HW_SWAP - temp = swab32 (temp); -#endif - cfg_base = (danube_pci_mapped_cfg | (0x68 << DANUBE_PCI_CFG_FUNNUM_SHF)) + 4; - writel(temp, ((u32*)cfg_base)); - - local_irq_restore(flags); - - if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ)) - return 1; - - return 0; -} - -static int danube_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 * val) -{ - u32 data = 0; - - if (danube_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) - return PCIBIOS_DEVICE_NOT_FOUND; - - if (size == 1) - *val = (data >> ((where & 3) << 3)) & 0xff; - else if (size == 2) - *val = (data >> ((where & 3) << 3)) & 0xffff; - else - *val = data; - - return PCIBIOS_SUCCESSFUL; -} - -static int danube_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - u32 data = 0; - - if (size == 4) - { - data = val; - } else { - if (danube_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) - return PCIBIOS_DEVICE_NOT_FOUND; - - if (size == 1) - data = (data & ~(0xff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - else if (size == 2) - data = (data & ~(0xffff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - } - - if (danube_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - - -int pcibios_plat_dev_init(struct pci_dev *dev){ - u8 pin; - - pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); - - switch(pin) { - case 0: - break; - case 1: - //falling edge level triggered:0x4, low level:0xc, rising edge:0x2 - printk("%s:%s[%d] %08X \n", __FILE__, __func__, __LINE__, dev->irq); - writel(readl(DANUBE_EBU_PCC_CON) | 0xc, DANUBE_EBU_PCC_CON); - writel(readl(DANUBE_EBU_PCC_IEN) | 0x10, DANUBE_EBU_PCC_IEN); - break; - case 2: - case 3: - case 4: - printk ("WARNING: interrupt pin %d not supported yet!\n", pin); - default: - printk ("WARNING: invalid interrupt pin %d\n", pin); - return 1; - } - - return 0; -} - -static void __init danube_pci_startup (void){ - /*initialize the first PCI device--danube itself */ - u32 temp_buffer; - /*TODO: trigger reset */ - writel(readl(DANUBE_CGU_IFCCR) & ~0xf00000, DANUBE_CGU_IFCCR); - writel(readl(DANUBE_CGU_IFCCR) | 0x800000, DANUBE_CGU_IFCCR); - /* PCIS of IF_CLK of CGU : 1 =>PCI Clock output - 0 =>clock input - PADsel of PCI_CR of CGU : 1 =>From CGU - : 0 =>From pad - */ - writel(readl(DANUBE_CGU_IFCCR) | (1 << 16), DANUBE_CGU_IFCCR); - writel((1 << 31) | (1 << 30), DANUBE_CGU_PCICR); - - /* prepare GPIO */ - /* PCI_RST: P1.5 ALT 01 */ - //pliu20060613: start - writel(readl(DANUBE_GPIO_P1_OUT) | (1 << 5), DANUBE_GPIO_P1_OUT); - writel(readl(DANUBE_GPIO_P1_OD) | (1 << 5), DANUBE_GPIO_P1_OD); - writel(readl(DANUBE_GPIO_P1_DIR) | (1 << 5), DANUBE_GPIO_P1_DIR); - writel(readl(DANUBE_GPIO_P1_ALTSEL1) & ~(1 << 5), DANUBE_GPIO_P1_ALTSEL1); - writel(readl(DANUBE_GPIO_P1_ALTSEL0) & ~(1 << 5), DANUBE_GPIO_P1_ALTSEL0); - //pliu20060613: end - /* PCI_REQ1: P1.13 ALT 01 */ - /* PCI_GNT1: P1.14 ALT 01 */ - writel(readl(DANUBE_GPIO_P1_DIR) & ~0x2000, DANUBE_GPIO_P1_DIR); - writel(readl(DANUBE_GPIO_P1_DIR) | 0x4000, DANUBE_GPIO_P1_DIR); - writel(readl(DANUBE_GPIO_P1_ALTSEL1) & ~0x6000, DANUBE_GPIO_P1_ALTSEL1); - writel(readl(DANUBE_GPIO_P1_ALTSEL0) | 0x6000, DANUBE_GPIO_P1_ALTSEL0); - /* PCI_REQ2: P1.15 ALT 10 */ - /* PCI_GNT2: P1.7 ALT 10 */ - - - /* enable auto-switching between PCI and EBU */ - writel(0xa, PCI_CR_CLK_CTRL); - /* busy, i.e. configuration is not done, PCI access has to be retried */ - writel(readl(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD); - wmb (); - /* BUS Master/IO/MEM access */ - writel(readl(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD); - - temp_buffer = readl(PCI_CR_PC_ARB); - /* enable external 2 PCI masters */ - temp_buffer &= (~(0xf << 16)); - /* enable internal arbiter */ - temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT); - /* enable internal PCI master reqest */ - temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS)); - - /* enable EBU reqest */ - temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS)); - - /* enable all external masters request */ - temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS)); - writel(temp_buffer, PCI_CR_PC_ARB); - - wmb (); - - /* FPI ==> PCI MEM address mapping */ - /* base: 0xb8000000 == > 0x18000000 */ - /* size: 8x4M = 32M */ - writel(0x18000000, PCI_CR_FCI_ADDR_MAP0); - writel(0x18400000, PCI_CR_FCI_ADDR_MAP1); - writel(0x18800000, PCI_CR_FCI_ADDR_MAP2); - writel(0x18c00000, PCI_CR_FCI_ADDR_MAP3); - writel(0x19000000, PCI_CR_FCI_ADDR_MAP4); - writel(0x19400000, PCI_CR_FCI_ADDR_MAP5); - writel(0x19800000, PCI_CR_FCI_ADDR_MAP6); - writel(0x19c00000, PCI_CR_FCI_ADDR_MAP7); - - /* FPI ==> PCI IO address mapping */ - /* base: 0xbAE00000 == > 0xbAE00000 */ - /* size: 2M */ - writel(0xbae00000, PCI_CR_FCI_ADDR_MAP11hg); - - /* PCI ==> FPI address mapping */ - /* base: 0x0 ==> 0x0 */ - /* size: 32M */ - /* BAR1 32M map to SDR address */ - writel(0x0e000008, PCI_CR_BAR11MASK); - writel(0, PCI_CR_PCI_ADDR_MAP11); - writel(0, PCI_CS_BASE_ADDR1); -#ifdef CONFIG_DANUBE_PCI_HW_SWAP - /* both TX and RX endian swap are enabled */ - DANUBE_PCI_REG32 (PCI_CR_PCI_EOI_REG) |= 3; - wmb (); -#endif - /*TODO: disable BAR2 & BAR3 - why was this in the origianl infineon code */ - writel(readl(PCI_CR_BAR12MASK) | 0x80000000, PCI_CR_BAR12MASK); - writel(readl(PCI_CR_BAR13MASK) | 0x80000000, PCI_CR_BAR13MASK); - /*use 8 dw burse length */ - writel(0x303, PCI_CR_FCI_BURST_LENGTH); - - writel(readl(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD); - wmb(); - writel(readl(DANUBE_GPIO_P1_OUT) & ~(1 << 5), DANUBE_GPIO_P1_OUT); - wmb(); - mdelay (1); - writel(readl(DANUBE_GPIO_P1_OUT) | (1 << 5), DANUBE_GPIO_P1_OUT); -} - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin){ - printk("\n\n\n%s:%s[%d] %d %d\n", __FILE__, __func__, __LINE__, slot, pin); - switch (slot) { - case 13: - /* IDSEL = AD29 --> USB Host Controller */ - return (INT_NUM_IM1_IRL0 + 17); - case 14: - /* IDSEL = AD30 --> mini PCI connector */ - //return (INT_NUM_IM1_IRL0 + 14); - return (INT_NUM_IM0_IRL0 + 22); - default: - printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin); - return 0; - } -} - -int pcibios_init(void){ - extern int pci_probe_only; - - pci_probe_only = 0; - printk ("PCI: Probing PCI hardware on host bus 0.\n"); - - danube_pci_startup (); - - // DANUBE_PCI_REG32(PCI_CR_CLK_CTRL_REG) &= (~8); - danube_pci_mapped_cfg = ioremap_nocache(0x17000000, 0x800 * 16); - printk("Danube PCI mapped to 0x%08X\n", (unsigned long)danube_pci_mapped_cfg); - - danube_pci_controller.io_map_base = (unsigned long)ioremap(DANUBE_PCI_IO_BASE, DANUBE_PCI_IO_SIZE - 1); - - printk("Danube PCI I/O mapped to 0x%08X\n", (unsigned long)danube_pci_controller.io_map_base); - - register_pci_controller(&danube_pci_controller); - - return 0; -} - -arch_initcall(pcibios_init); diff --git a/target/linux/danube/files/arch/mips/danube/pmu.c b/target/linux/danube/files/arch/mips/danube/pmu.c deleted file mode 100644 index 5bb66dbe5b..0000000000 --- a/target/linux/danube/files/arch/mips/danube/pmu.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * arch/mips/danube/pmu.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/version.h> -#include <asm/danube/danube.h> - -void -danube_pmu_enable (unsigned int module) -{ - int err = 1000000; - - writel(readl(DANUBE_PMU_PWDCR) & ~module, DANUBE_PMU_PWDCR); - while (--err && (readl(DANUBE_PMU_PWDSR) & module)) {} - - if (!err) - panic("activating PMU module failed!"); -} -EXPORT_SYMBOL(danube_pmu_enable); - -void -danube_pmu_disable (unsigned int module) -{ - writel(readl(DANUBE_PMU_PWDCR) | module, DANUBE_PMU_PWDCR); -} -EXPORT_SYMBOL(danube_pmu_disable); diff --git a/target/linux/danube/files/arch/mips/danube/prom.c b/target/linux/danube/files/arch/mips/danube/prom.c deleted file mode 100644 index efb06120ef..0000000000 --- a/target/linux/danube/files/arch/mips/danube/prom.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * arch/mips/danube/prom.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2005 Wu Qi Ming infineon - * - * Rewrite of Infineon Danube code, thanks to infineon for the support, - * software and hardware - * - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ - -#include <linux/init.h> -#include <linux/bootmem.h> -#include <asm/bootinfo.h> -#include <asm/danube/danube.h> - -static char buf[1024]; - -void -prom_free_prom_memory (void) -{ -} - -const char * -get_system_type (void) -{ - return BOARD_SYSTEM_TYPE; -} - -void -prom_putchar (char c) -{ - while ((readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK) >> ASCFSTAT_TXFFLOFF); - - if (c == '\n') - writel('\r', DANUBE_ASC1_TBUF); - writel(c, DANUBE_ASC1_TBUF); -} - -void -prom_printf (const char * fmt, ...) -{ - va_list args; - int l; - char *p, *buf_end; - - va_start(args, fmt); - l = vsprintf(buf, fmt, args); - va_end(args); - buf_end = buf + l; - - for (p = buf; p < buf_end; p++) - { - prom_putchar(*p); - } -} - -void __init -prom_init(void) -{ - mips_machgroup = MACH_GROUP_DANUBE; - mips_machtype = MACH_INFINEON_DANUBE; - - strcpy(&(arcs_cmdline[0]), "console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit"); - add_memory_region (0x00000000, 0x2000000, BOOT_MEM_RAM); -} diff --git a/target/linux/danube/files/arch/mips/danube/reset.c b/target/linux/danube/files/arch/mips/danube/reset.c deleted file mode 100644 index cb1793ca77..0000000000 --- a/target/linux/danube/files/arch/mips/danube/reset.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * arch/mips/danube/prom.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2005 infineon - * - * Rewrite of Infineon Danube code, thanks to infineon for the support, - * software and hardware - * - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ - -#include <linux/kernel.h> -#include <linux/pm.h> -#include <asm/reboot.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/danube/danube.h> - -static void -danube_machine_restart (char *command) -{ - printk (KERN_NOTICE "System restart\n"); - local_irq_disable (); - - writel(readl(DANUBE_RCU_REQ) | DANUBE_RST_ALL, DANUBE_RCU_REQ); - for (;;); -} - -static void -danube_machine_halt (void) -{ - printk (KERN_NOTICE "System halted.\n"); - local_irq_disable (); - for (;;); -} - -static void -danube_machine_power_off (void) -{ - printk (KERN_NOTICE "Please turn off the power now.\n"); - local_irq_disable (); - for (;;); -} - -void -danube_reboot_setup (void) -{ - _machine_restart = danube_machine_restart; - _machine_halt = danube_machine_halt; - pm_power_off = danube_machine_power_off; -} diff --git a/target/linux/danube/files/arch/mips/danube/setup.c b/target/linux/danube/files/arch/mips/danube/setup.c deleted file mode 100644 index 60b0ce28e7..0000000000 --- a/target/linux/danube/files/arch/mips/danube/setup.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * arch/mips/danube/setup.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2004 peng.liu@infineon.com - * - * Rewrite of Infineon Danube code, thanks to infineon for the support, - * software and hardware - * - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ - -#include <linux/init.h> - -#include <asm/time.h> -#include <asm/traps.h> -#include <asm/cpu.h> -#include <asm/irq.h> -#include <asm/danube/danube.h> -#include <asm/danube/danube_irq.h> -#include <asm/danube/danube_pmu.h> - -static unsigned int r4k_offset; /* Amount to increment compare reg each time */ -static unsigned int r4k_cur; /* What counter should be at next timer irq */ - -extern void danube_reboot_setup (void); -void prom_printf (const char * fmt, ...); - -void -__init bus_error_init (void) -{ - /* nothing yet */ -} - -unsigned int -danube_get_ddr_hz (void) -{ - switch (readl(DANUBE_CGU_SYS) & 0x3) - { - case 0: - return CLOCK_167M; - case 1: - return CLOCK_133M; - case 2: - return CLOCK_111M; - } - return CLOCK_83M; -} -EXPORT_SYMBOL(danube_get_ddr_hz); - -unsigned int -danube_get_cpu_hz (void) -{ - unsigned int ddr_clock = danube_get_ddr_hz(); - switch (readl(DANUBE_CGU_SYS) & 0xc) - { - case 0: - return CLOCK_333M; - case 4: - return ddr_clock; - } - return ddr_clock << 1; -} -EXPORT_SYMBOL(danube_get_cpu_hz); - -unsigned int -danube_get_fpi_hz (void) -{ - unsigned int ddr_clock = danube_get_ddr_hz(); - if (readl(DANUBE_CGU_SYS) & 0x40) - { - return ddr_clock >> 1; - } - return ddr_clock; -} -EXPORT_SYMBOL(danube_get_fpi_hz); - -unsigned int -danube_get_cpu_ver (void) -{ - return readl(DANUBE_MCD_CHIPID) & 0xFFFFF000; -} -EXPORT_SYMBOL(danube_get_cpu_ver); - -void -danube_time_init (void) -{ - mips_hpt_frequency = danube_get_cpu_hz() / 2; - r4k_offset = mips_hpt_frequency / HZ; - printk("mips_hpt_frequency:%d\n", mips_hpt_frequency); - printk("r4k_offset: %08x(%d)\n", r4k_offset, r4k_offset); -} - -int -danube_be_handler(struct pt_regs *regs, int is_fixup) -{ - /*TODO*/ - printk(KERN_ERR "TODO: BUS error\n"); - - return MIPS_BE_FATAL; -} - -/* ISR GPTU Timer 6 for high resolution timer */ -static irqreturn_t -danube_timer6_interrupt(int irq, void *dev_id) -{ - timer_interrupt(DANUBE_TIMER6_INT, NULL); - - return IRQ_HANDLED; -} - -static struct irqaction hrt_irqaction = { - .handler = danube_timer6_interrupt, - .flags = IRQF_DISABLED, - .name = "hrt", -}; - -void __init -plat_timer_setup (struct irqaction *irq) -{ - unsigned int retval; - - setup_irq(MIPS_CPU_TIMER_IRQ, irq); - - r4k_cur = (read_c0_count() + r4k_offset); - write_c0_compare(r4k_cur); - - danube_pmu_enable(DANUBE_PMU_PWDCR_GPT | DANUBE_PMU_PWDCR_FPI); - - writel(0x100, DANUBE_GPTU_GPT_CLC); - - writel(0xffff, DANUBE_GPTU_GPT_CAPREL); - writel(0x80C0, DANUBE_GPTU_GPT_T6CON); - - retval = setup_irq(DANUBE_TIMER6_INT, &hrt_irqaction); - - if (retval) - { - prom_printf("reqeust_irq failed %d. HIGH_RES_TIMER is diabled\n", DANUBE_TIMER6_INT); - } -} - -void __init -plat_mem_setup (void) -{ - u32 status; - prom_printf("This %s has a cpu rev of 0x%X\n", BOARD_SYSTEM_TYPE, danube_get_cpu_ver()); - - //TODO WHY ??? - /* clear RE bit*/ - status = read_c0_status(); - status &= (~(1<<25)); - write_c0_status(status); - - danube_reboot_setup(); - board_time_init = danube_time_init; - board_be_handler = &danube_be_handler; - - ioport_resource.start = IOPORT_RESOURCE_START; - ioport_resource.end = IOPORT_RESOURCE_END; - iomem_resource.start = IOMEM_RESOURCE_START; - iomem_resource.end = IOMEM_RESOURCE_END; -} diff --git a/target/linux/danube/files/drivers/char/danube_eeprom.c b/target/linux/danube/files/drivers/char/danube_eeprom.c deleted file mode 100644 index 1835f2776e..0000000000 --- a/target/linux/danube/files/drivers/char/danube_eeprom.c +++ /dev/null @@ -1,541 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * This driver was originally based on the INCA-IP driver, but due to - * fundamental conceptual drawbacks there has been changed a lot. - * - * Based on INCA-IP driver Copyright (c) 2003 Gary Jennejohn <gj@denx.de> - * Based on the VxWorks drivers Copyright (c) 2002, Infineon Technologies. - * - * Copyright (C) 2006 infineon - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ - -#define IFAP_EEPROM_DRV_VERSION "0.0.1" - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fs.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/spinlock.h> -#include <linux/slab.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/bitops.h> - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/version.h> - -#include <asm/danube/danube.h> -#include <asm/danube/danube_irq.h> -#include <asm/danube/ifx_ssc_defines.h> -#include <asm/danube/ifx_ssc.h> - -/* allow the user to set the major device number */ -static int danube_eeprom_maj = 0; - -extern int ifx_ssc_init (void); -extern int ifx_ssc_open (struct inode *inode, struct file *filp); -extern int ifx_ssc_close (struct inode *inode, struct file *filp); -extern void ifx_ssc_cleanup_module (void); -extern int ifx_ssc_ioctl (struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long data); -extern ssize_t ifx_ssc_kwrite (int port, const char *kbuf, size_t len); -extern ssize_t ifx_ssc_kread (int port, char *kbuf, size_t len); - -extern int ifx_ssc_cs_low (unsigned int pin); -extern int ifx_ssc_cs_high (unsigned int pin); -extern int ifx_ssc_txrx (char *tx_buf, unsigned int tx_len, char *rx_buf, unsigned int rx_len); -extern int ifx_ssc_tx (char *tx_buf, unsigned int tx_len); -extern int ifx_ssc_rx (char *rx_buf, unsigned int rx_len); - -#define EEPROM_CS IFX_SSC_WHBGPOSTAT_OUT0_POS - -/* commands for EEPROM, x25160, x25140 */ -#define EEPROM_WREN ((unsigned char)0x06) -#define EEPROM_WRDI ((unsigned char)0x04) -#define EEPROM_RDSR ((unsigned char)0x05) -#define EEPROM_WRSR ((unsigned char)0x01) -#define EEPROM_READ ((unsigned char)0x03) -#define EEPROM_WRITE ((unsigned char)0x02) -#define EEPROM_PAGE_SIZE 4 -#define EEPROM_SIZE 512 - -static int -eeprom_rdsr (void) -{ - int ret = 0; - unsigned char cmd = EEPROM_RDSR; - unsigned long flag; - char status; - - local_irq_save(flag); - - if ((ret = ifx_ssc_cs_low(EEPROM_CS)) == 0) - if ((ret = ifx_ssc_txrx(&cmd, 1, &status, 1)) >= 0) - ret = status & 1; - - ifx_ssc_cs_high(EEPROM_CS); - local_irq_restore(flag); - - return ret; -} - -void -eeprom_wip_over (void) -{ - while (eeprom_rdsr()) - printk("waiting for eeprom\n"); -} - -static int -eeprom_wren (void) -{ - unsigned char cmd = EEPROM_WREN; - int ret = 0; - unsigned long flag; - - local_irq_save(flag); - if ((ret = ifx_ssc_cs_low(EEPROM_CS)) == 0) - if ((ret = ifx_ssc_tx(&cmd, 1)) >= 0) - ret = 0; - - ifx_ssc_cs_high(EEPROM_CS); - local_irq_restore(flag); - - if (!ret) - eeprom_wip_over(); - - return ret; -} - -static int -eeprom_wrsr (void) -{ - int ret = 0; - unsigned char cmd[2]; - unsigned long flag; - - cmd[0] = EEPROM_WRSR; - cmd[1] = 0; - - if ((ret = eeprom_wren())) - { - printk ("eeprom_wren fails\n"); - goto out1; - } - - local_irq_save(flag); - - if ((ret = ifx_ssc_cs_low(EEPROM_CS))) - goto out; - - if ((ret = ifx_ssc_tx(cmd, 2)) < 0) { - ifx_ssc_cs_high(EEPROM_CS); - goto out; - } - - if ((ret = ifx_ssc_cs_low(EEPROM_CS))) - goto out; - - local_irq_restore(flag); - eeprom_wip_over(); - - return ret; - -out: - local_irq_restore (flag); - eeprom_wip_over (); - -out1: - return ret; -} - -static int -eeprom_read (unsigned int addr, unsigned char *buf, unsigned int len) -{ - int ret = 0; - unsigned char write_buf[2]; - unsigned int eff = 0; - unsigned long flag; - - while (1) - { - eeprom_wip_over(); - eff = EEPROM_PAGE_SIZE - (addr % EEPROM_PAGE_SIZE); - eff = (eff < len) ? eff : len; - local_irq_save(flag); - - if ((ret = ifx_ssc_cs_low(EEPROM_CS)) < 0) - goto out; - - write_buf[0] = EEPROM_READ | ((unsigned char) ((addr & 0x100) >> 5)); - write_buf[1] = (addr & 0xff); - - if ((ret = ifx_ssc_txrx (write_buf, 2, buf, eff)) != eff) - { - printk("ssc_txrx fails %d\n", ret); - ifx_ssc_cs_high (EEPROM_CS); - goto out; - } - - buf += ret; - len -= ret; - addr += ret; - - if ((ret = ifx_ssc_cs_high(EEPROM_CS))) - goto out; - - local_irq_restore(flag); - - if (len <= 0) - goto out2; - } - -out: - local_irq_restore (flag); -out2: - return ret; -} - -static int -eeprom_write (unsigned int addr, unsigned char *buf, unsigned int len) -{ - int ret = 0; - unsigned int eff = 0; - unsigned char write_buf[2]; - int i; - unsigned char rx_buf[EEPROM_PAGE_SIZE]; - - while (1) - { - eeprom_wip_over(); - - if ((ret = eeprom_wren())) - { - printk("eeprom_wren fails\n"); - goto out; - } - - write_buf[0] = EEPROM_WRITE | ((unsigned char) ((addr & 0x100) >> 5)); - write_buf[1] = (addr & 0xff); - - eff = EEPROM_PAGE_SIZE - (addr % EEPROM_PAGE_SIZE); - eff = (eff < len) ? eff : len; - - printk("EEPROM Write:\n"); - for (i = 0; i < eff; i++) { - printk("%2x ", buf[i]); - if ((i % 16) == 15) - printk("\n"); - } - printk("\n"); - - if ((ret = ifx_ssc_cs_low(EEPROM_CS))) - goto out; - - if ((ret = ifx_ssc_tx (write_buf, 2)) < 0) - { - printk("ssc_tx fails %d\n", ret); - ifx_ssc_cs_high(EEPROM_CS); - goto out; - } - - if ((ret = ifx_ssc_tx (buf, eff)) != eff) - { - printk("ssc_tx fails %d\n", ret); - ifx_ssc_cs_high(EEPROM_CS); - goto out; - } - - buf += ret; - len -= ret; - addr += ret; - - if ((ret = ifx_ssc_cs_high (EEPROM_CS))) - goto out; - - printk ("<=="); - eeprom_read((addr - eff), rx_buf, eff); - for (i = 0; i < eff; i++) - { - printk ("[%x]", rx_buf[i]); - } - printk ("\n"); - - if (len <= 0) - break; - } - -out: - return ret; -} - -int -danube_eeprom_open (struct inode *inode, struct file *filp) -{ - filp->f_pos = 0; - return 0; -} - -int -danube_eeprom_close (struct inode *inode, struct file *filp) -{ - return 0; -} - -int -danube_eeprom_ioctl (struct inode *inode, struct file *filp, unsigned int cmd, unsigned long data) -{ - return 0; -} - -ssize_t -danube_eeprom_read (char *buf, size_t len, unsigned int addr) -{ - int ret = 0; - unsigned int data; - - printk("addr:=%d\n", addr); - printk("len:=%d\n", len); - - if ((addr + len) > EEPROM_SIZE) - { - printk("invalid len\n"); - addr = 0; - len = EEPROM_SIZE / 2; - } - - if ((ret = ifx_ssc_open((struct inode *) 0, NULL))) - { - printk("danube_eeprom_open fails\n"); - goto out; - } - - data = (unsigned int)IFX_SSC_MODE_RXTX; - - if ((ret = ifx_ssc_ioctl((struct inode *) 0, NULL, IFX_SSC_RXTX_MODE_SET, (unsigned long) &data))) - { - printk("set RXTX mode fails\n"); - goto out; - } - - if ((ret = eeprom_wrsr())) - { - printk("EEPROM reset fails\n"); - goto out; - } - - if ((ret = eeprom_read(addr, buf, len))) - { - printk("eeprom read fails\n"); - goto out; - } - -out: - if (ifx_ssc_close((struct inode *) 0, NULL)) - printk("danube_eeprom_close fails\n"); - - return len; -} -EXPORT_SYMBOL(danube_eeprom_read); - -static ssize_t -danube_eeprom_fops_read (struct file *filp, char *ubuf, size_t len, loff_t * off) -{ - int ret = 0; - unsigned char ssc_rx_buf[EEPROM_SIZE]; - long flag; - - if (*off >= EEPROM_SIZE) - return 0; - - if (*off + len > EEPROM_SIZE) - len = EEPROM_SIZE - *off; - - if (len == 0) - return 0; - - local_irq_save(flag); - - if ((ret = danube_eeprom_read(ssc_rx_buf, len, *off)) < 0) - { - printk("read fails, err=%x\n", ret); - local_irq_restore(flag); - return ret; - } - - if (copy_to_user((void*)ubuf, ssc_rx_buf, ret) != 0) - { - local_irq_restore(flag); - ret = -EFAULT; - } - - local_irq_restore(flag); - *off += len; - - return len; -} - -ssize_t -danube_eeprom_write (char *buf, size_t len, unsigned int addr) -{ - int ret = 0; - unsigned int data; - - if ((ret = ifx_ssc_open ((struct inode *) 0, NULL))) - { - printk ("danube_eeprom_open fails\n"); - goto out; - } - - data = (unsigned int) IFX_SSC_MODE_RXTX; - - if ((ret = ifx_ssc_ioctl ((struct inode *) 0, NULL, IFX_SSC_RXTX_MODE_SET, (unsigned long) &data))) - { - printk ("set RXTX mode fails\n"); - goto out; - } - - if ((ret = eeprom_wrsr ())) { - printk ("EEPROM reset fails\n"); - goto out; - } - - if ((ret = eeprom_write (addr, buf, len))) { - printk ("eeprom write fails\n"); - goto out; - } - -out: - if (ifx_ssc_close ((struct inode *) 0, NULL)) - printk ("danube_eeprom_close fails\n"); - - return ret; -} -EXPORT_SYMBOL(danube_eeprom_write); - -static ssize_t -danube_eeprom_fops_write (struct file *filp, const char *ubuf, size_t len, loff_t * off) -{ - int ret = 0; - unsigned char ssc_tx_buf[EEPROM_SIZE]; - - if (*off >= EEPROM_SIZE) - return 0; - - if (len + *off > EEPROM_SIZE) - len = EEPROM_SIZE - *off; - - if ((ret = copy_from_user (ssc_tx_buf, ubuf, len))) - return EFAULT; - - ret = danube_eeprom_write (ssc_tx_buf, len, *off); - - if (ret > 0) - *off = ret; - - return ret; -} - -loff_t -danube_eeprom_llseek (struct file * filp, loff_t off, int whence) -{ - loff_t newpos; - switch (whence) { - case SEEK_SET: - newpos = off; - break; - - case SEEK_CUR: - newpos = filp->f_pos + off; - break; - - default: - return -EINVAL; - } - - if (newpos < 0) - return -EINVAL; - - filp->f_pos = newpos; - - return newpos; -} - -static struct file_operations danube_eeprom_fops = { - owner:THIS_MODULE, - llseek:danube_eeprom_llseek, - read:danube_eeprom_fops_read, - write:danube_eeprom_fops_write, - ioctl:danube_eeprom_ioctl, - open:danube_eeprom_open, - release:danube_eeprom_close, -}; - -int __init -danube_eeprom_init (void) -{ - int ret = 0; - - danube_eeprom_maj = register_chrdev(0, "eeprom", &danube_eeprom_fops); - - if (danube_eeprom_maj < 0) - { - printk("failed to register eeprom device\n"); - ret = -EINVAL; - - goto out; - } - - printk("danube_eeprom : /dev/eeprom mayor %d\n", danube_eeprom_maj); - -out: - return ret; -} - -void __exit -danube_eeprom_cleanup_module (void) -{ - /*if (unregister_chrdev (danube_eeprom_maj, "eeprom")) { - printk ("Unable to unregister major %d for the EEPROM\n", - maj); - }*/ -} - -module_exit (danube_eeprom_cleanup_module); -module_init (danube_eeprom_init); - -MODULE_LICENSE ("GPL"); -MODULE_AUTHOR ("Peng Liu"); -MODULE_DESCRIPTION ("IFAP EEPROM driver"); -MODULE_SUPPORTED_DEVICE ("danube_eeprom"); - - diff --git a/target/linux/danube/files/drivers/char/danube_gpio.c b/target/linux/danube/files/drivers/char/danube_gpio.c deleted file mode 100644 index dbdb71e8fb..0000000000 --- a/target/linux/danube/files/drivers/char/danube_gpio.c +++ /dev/null @@ -1,442 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2005 infineon - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/proc_fs.h> -#include <linux/init.h> -#include <linux/ioctl.h> -#include <asm/semaphore.h> -#include <asm/uaccess.h> -#include <asm/danube/danube.h> -#include <asm/danube/danube_ioctl.h> - -#define MAX_PORTS 2 -#define PINS_PER_PORT 16 - -static unsigned int danube_gpio_major = 0; - -/* TODO do we need this ? */ -static struct semaphore port_sem; - -/* TODO do we really need this ? return in a define is forbidden by coding style */ -#define DANUBE_GPIO_SANITY {if (port > MAX_PORTS || pin > PINS_PER_PORT) return -EINVAL; } - -int -danube_port_reserve_pin (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - printk("%s : call to obseleted function\n", __func__); - - return 0; -} -EXPORT_SYMBOL(danube_port_reserve_pin); - -int -danube_port_free_pin (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - printk("%s : call to obseleted function\n", __func__); - - return 0; -} -EXPORT_SYMBOL(danube_port_free_pin); - -int -danube_port_set_open_drain (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - writel(readl(DANUBE_GPIO_P0_OD + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_OD); - - return 0; -} -EXPORT_SYMBOL(danube_port_set_open_drain); - -int -danube_port_clear_open_drain (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - writel(readl(DANUBE_GPIO_P0_OD + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_OD); - - return 0; -} -EXPORT_SYMBOL(danube_port_clear_open_drain); - -int -danube_port_set_pudsel (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - writel(readl(DANUBE_GPIO_P0_PUDSEL + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_PUDSEL); - - return 0; -} -EXPORT_SYMBOL(danube_port_set_pudsel); - -int -danube_port_clear_pudsel (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - writel(readl(DANUBE_GPIO_P0_PUDSEL + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_PUDSEL); - - return 0; -} -EXPORT_SYMBOL(danube_port_clear_pudsel); - -int -danube_port_set_puden (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - writel(readl(DANUBE_GPIO_P0_PUDEN + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_PUDEN); - - return 0; -} -EXPORT_SYMBOL(danube_port_set_puden); - -int -danube_port_clear_puden (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - writel(readl(DANUBE_GPIO_P0_PUDEN + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_PUDEN); - - return 0; -} -EXPORT_SYMBOL(danube_port_clear_puden); - -int -danube_port_set_stoff (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - writel(readl(DANUBE_GPIO_P0_STOFF + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_STOFF); - - return 0; -} -EXPORT_SYMBOL(danube_port_set_stoff); - -int -danube_port_clear_stoff (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - writel(readl(DANUBE_GPIO_P0_STOFF + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_STOFF); - - return 0; -} -EXPORT_SYMBOL(danube_port_clear_stoff); - -int -danube_port_set_dir_out (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - writel(readl(DANUBE_GPIO_P0_DIR + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_DIR); - - return 0; -} -EXPORT_SYMBOL(danube_port_set_dir_out); - -int -danube_port_set_dir_in (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - writel(readl(DANUBE_GPIO_P0_DIR + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_DIR); - - return 0; -} -EXPORT_SYMBOL(danube_port_set_dir_in); - -int -danube_port_set_output (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - writel(readl(DANUBE_GPIO_P0_OUT + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_OUT); - - return 0; -} -EXPORT_SYMBOL(danube_port_set_output); - -int -danube_port_clear_output (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - writel(readl(DANUBE_GPIO_P0_OUT + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_OUT); - - return 0; -} -EXPORT_SYMBOL(danube_port_clear_output); - -int -danube_port_get_input (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - - if (readl(DANUBE_GPIO_P0_IN + (port * 0x30)) & (1 << pin)) - return 0; - else - return 1; -} -EXPORT_SYMBOL(danube_port_get_input); - -int -danube_port_set_altsel0 (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - writel(readl(DANUBE_GPIO_P0_ALTSEL0 + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_ALTSEL0); - - return 0; -} -EXPORT_SYMBOL(danube_port_set_altsel0); - -int -danube_port_clear_altsel0 (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - writel(readl(DANUBE_GPIO_P0_ALTSEL0 + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_ALTSEL0); - - return 0; -} -EXPORT_SYMBOL(danube_port_clear_altsel0); - -int -danube_port_set_altsel1 (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - writel(readl(DANUBE_GPIO_P0_ALTSEL1 + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_ALTSEL1); - - return 0; -} -EXPORT_SYMBOL(danube_port_set_altsel1); - -int -danube_port_clear_altsel1 (unsigned int port, unsigned int pin) -{ - DANUBE_GPIO_SANITY; - writel(readl(DANUBE_GPIO_P0_ALTSEL1 + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_ALTSEL1); - - return 0; -} -EXPORT_SYMBOL(danube_port_clear_altsel1); - -long danube_port_read_procmem_helper(char* tag, u32* in_reg, char *buf) -{ - u32 reg, bit = 0; - unsigned int len, t; - - len = sprintf(buf, "\n%s: ", tag); - reg = readl(in_reg); - bit = 0x80000000; - for (t = 0; t < 32; t++) { - if ((reg & bit) > 0) - len = len + sprintf(buf + len, "X"); - else - len = len + sprintf(buf + len, " "); - bit = bit >> 1; - } - - return len; -} - -int -danube_port_read_procmem (char *buf, char **start, off_t offset, int count, - int *eof, void *data) -{ - long len = sprintf (buf, "\nDanube Port Settings\n"); - - len += sprintf (buf + len, - " 3 2 1 0\n"); - len += sprintf (buf + len, - " 10987654321098765432109876543210\n"); - len += sprintf (buf + len, - "----------------------------------------\n"); - - len += danube_port_read_procmem_helper("P0-OUT", DANUBE_GPIO_P0_OUT, &buf[len]); - len += danube_port_read_procmem_helper("P1-OUT", DANUBE_GPIO_P1_OUT, &buf[len]); - len += danube_port_read_procmem_helper("P0-IN ", DANUBE_GPIO_P0_IN, &buf[len]); - len += danube_port_read_procmem_helper("P1-IN ", DANUBE_GPIO_P1_IN, &buf[len]); - len += danube_port_read_procmem_helper("P0-DIR", DANUBE_GPIO_P0_DIR, &buf[len]); - len += danube_port_read_procmem_helper("P1-DIR", DANUBE_GPIO_P1_DIR, &buf[len]); - len += danube_port_read_procmem_helper("P0-STO ", DANUBE_GPIO_P0_STOFF, &buf[len]); - len += danube_port_read_procmem_helper("P1-STO ", DANUBE_GPIO_P1_STOFF, &buf[len]); - len += danube_port_read_procmem_helper("P0-PUDE", DANUBE_GPIO_P0_PUDEN, &buf[len]); - len += danube_port_read_procmem_helper("P1-PUDE", DANUBE_GPIO_P1_PUDEN, &buf[len]); - len += danube_port_read_procmem_helper("P0-OD ", DANUBE_GPIO_P0_OD, &buf[len]); - len += danube_port_read_procmem_helper("P1-OD ", DANUBE_GPIO_P1_OD, &buf[len]); - len += danube_port_read_procmem_helper("P0-PUDS", DANUBE_GPIO_P0_PUDSEL, &buf[len]); - len += danube_port_read_procmem_helper("P1-PUDS", DANUBE_GPIO_P1_PUDSEL, &buf[len]); - len += danube_port_read_procmem_helper("P0-ALT0", DANUBE_GPIO_P0_ALTSEL0, &buf[len]); - len += danube_port_read_procmem_helper("P1-ALT0", DANUBE_GPIO_P1_ALTSEL0, &buf[len]); - len += danube_port_read_procmem_helper("P0-ALT1", DANUBE_GPIO_P0_ALTSEL1, &buf[len]); - len += danube_port_read_procmem_helper("P1-ALT1", DANUBE_GPIO_P1_ALTSEL1, &buf[len]); - len = len + sprintf (buf + len, "\n\n"); - - *eof = 1; - - return len; -} - -static int -danube_port_open (struct inode *inode, struct file *filep) -{ - return 0; -} - -static int -danube_port_release (struct inode *inode, struct file *filelp) -{ - return 0; -} - -static int -danube_port_ioctl (struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - int ret = 0; - volatile struct danube_port_ioctl_parm parm; - - if (_IOC_TYPE (cmd) != DANUBE_PORT_IOC_MAGIC) - return -EINVAL; - - if (_IOC_DIR (cmd) & _IOC_WRITE) { - if (!access_ok - (VERIFY_READ, arg, - sizeof (struct danube_port_ioctl_parm))) - return -EFAULT; - ret = copy_from_user ((void *) &parm, (void *) arg, - sizeof (struct danube_port_ioctl_parm)); - } - if (_IOC_DIR (cmd) & _IOC_READ) { - if (!access_ok - (VERIFY_WRITE, arg, - sizeof (struct danube_port_ioctl_parm))) - return -EFAULT; - } - - if (down_trylock (&port_sem) != 0) - return -EBUSY; - - switch (cmd) { - case DANUBE_PORT_IOCOD: - if (parm.value == 0x00) - danube_port_clear_open_drain(parm.port, parm.pin); - else - danube_port_set_open_drain(parm.port, parm.pin); - break; - - case DANUBE_PORT_IOCPUDSEL: - if (parm.value == 0x00) - danube_port_clear_pudsel(parm.port, parm.pin); - else - danube_port_set_pudsel(parm.port, parm.pin); - break; - - case DANUBE_PORT_IOCPUDEN: - if (parm.value == 0x00) - danube_port_clear_puden(parm.port, parm.pin); - else - danube_port_set_puden(parm.port, parm.pin); - break; - - case DANUBE_PORT_IOCSTOFF: - if (parm.value == 0x00) - danube_port_clear_stoff(parm.port, parm.pin); - else - danube_port_set_stoff(parm.port, parm.pin); - break; - - case DANUBE_PORT_IOCDIR: - if (parm.value == 0x00) - danube_port_set_dir_in(parm.port, parm.pin); - else - danube_port_set_dir_out(parm.port, parm.pin); - break; - - case DANUBE_PORT_IOCOUTPUT: - if (parm.value == 0x00) - danube_port_clear_output(parm.port, parm.pin); - else - danube_port_set_output(parm.port, parm.pin); - break; - - case DANUBE_PORT_IOCALTSEL0: - if (parm.value == 0x00) - danube_port_clear_altsel0(parm.port, parm.pin); - else - danube_port_set_altsel0(parm.port, parm.pin); - break; - - case DANUBE_PORT_IOCALTSEL1: - if (parm.value == 0x00) - danube_port_clear_altsel1(parm.port, parm.pin); - else - danube_port_set_altsel1(parm.port, parm.pin); - break; - - case DANUBE_PORT_IOCINPUT: - parm.value = danube_port_get_input(parm.port, parm.pin); - copy_to_user((void*)arg, (void*)&parm, - sizeof(struct danube_port_ioctl_parm)); - break; - - default: - ret = -EINVAL; - } - - up (&port_sem); - - return ret; -} - -static struct file_operations port_fops = { - .open = danube_port_open, - .release = danube_port_release, - .ioctl = danube_port_ioctl -}; - -int __init -danube_gpio_init (void) -{ - int retval = 0; - - sema_init (&port_sem, 1); - - danube_gpio_major = register_chrdev(0, "danube_gpio", &port_fops); - if (!danube_gpio_major) - { - printk("danube-port: Error! Could not register port device. #%d\n", danube_gpio_major); - retval = -EINVAL; - goto out; - } - - create_proc_read_entry("danube_gpio", 0, NULL, - danube_port_read_procmem, NULL); - - printk("registered danube gpio driver\n"); - -out: - return retval; -} - -void __exit -danube_gpio_exit (void) -{ - unregister_chrdev(danube_gpio_major, "danube_gpio"); - remove_proc_entry("danube_gpio", NULL); -} - -module_init(danube_gpio_init); -module_exit(danube_gpio_exit); diff --git a/target/linux/danube/files/drivers/char/danube_led.c b/target/linux/danube/files/drivers/char/danube_led.c deleted file mode 100644 index 86a92d5999..0000000000 --- a/target/linux/danube/files/drivers/char/danube_led.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2006 infineon - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/version.h> -#include <linux/types.h> -#include <linux/fs.h> -#include <linux/init.h> -#include <asm/uaccess.h> -#include <asm/unistd.h> -#include <linux/errno.h> -#include <asm/danube/danube.h> -#include <asm/danube/danube_gpio.h> -#include <asm/danube/danube_pmu.h> - -#define DANUBE_LED_CLK_EDGE DANUBE_LED_FALLING -//#define DANUBE_LED_CLK_EDGE DANUBE_LED_RISING - -#define DANUBE_LED_SPEED DANUBE_LED_8HZ - -#define DANUBE_LED_GPIO_PORT 0 - -static int danube_led_major; - -void -danube_led_set (unsigned int led) -{ - led &= 0xffffff; - writel(readl(DANUBE_LED_CPU0) | led, DANUBE_LED_CPU0); -} -EXPORT_SYMBOL(danube_led_set); - -void -danube_led_clear (unsigned int led) -{ - led = ~(led & 0xffffff); - writel(readl(DANUBE_LED_CPU0) & led, DANUBE_LED_CPU0); -} -EXPORT_SYMBOL(danube_led_clear); - -void -danube_led_blink_set (unsigned int led) -{ - led &= 0xffffff; - writel(readl(DANUBE_LED_CON0) | led, DANUBE_LED_CON0); -} -EXPORT_SYMBOL(danube_led_blink_set); - -void -danube_led_blink_clear (unsigned int led) -{ - led = ~(led & 0xffffff); - writel(readl(DANUBE_LED_CON0) & led, DANUBE_LED_CON0); -} -EXPORT_SYMBOL(danube_led_blink_clear); - -void -danube_led_setup_gpio (void) -{ - int i = 0; - - /* we need to setup pins SH,D,ST (4,5,6) */ - for (i = 4; i < 7; i++) - { - danube_port_set_altsel0(DANUBE_LED_GPIO_PORT, i); - danube_port_clear_altsel1(DANUBE_LED_GPIO_PORT, i); - danube_port_set_dir_out(DANUBE_LED_GPIO_PORT, i); - danube_port_set_open_drain(DANUBE_LED_GPIO_PORT, i); - } -} - -static int -led_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) -{ - int ret = -EINVAL; - - switch ( cmd ) - { - } - - return ret; -} - -static int -led_open (struct inode *inode, struct file *file) -{ - return 0; -} - -static int -led_release (struct inode *inode, struct file *file) -{ - return 0; -} - -static struct file_operations danube_led_fops = { - .owner = THIS_MODULE, - .ioctl = led_ioctl, - .open = led_open, - .release = led_release -}; - - -/* -Map for LED on reference board - WLAN_READ LED11 OUT1 15 - WARNING LED12 OUT2 14 - FXS1_LINK LED13 OUT3 13 - FXS2_LINK LED14 OUT4 12 - FXO_ACT LED15 OUT5 11 - USB_LINK LED16 OUT6 10 - ADSL2_LINK LED19 OUT7 9 - BT_LINK LED17 OUT8 8 - SD_LINK LED20 OUT9 7 - ADSL2_TRAFFIC LED31 OUT16 0 -Map for hardware relay on reference board - USB Power On OUT11 5 - RELAY OUT12 4 -*/ - - -int __init -danube_led_init (void) -{ - int ret = 0; - - danube_led_setup_gpio(); - - writel(0, DANUBE_LED_AR); - writel(0, DANUBE_LED_CPU0); - writel(0, DANUBE_LED_CPU1); - writel(LED_CON0_SWU, DANUBE_LED_CON0); - writel(0, DANUBE_LED_CON1); - - /* setup the clock edge that the shift register is triggered on */ - writel(readl(DANUBE_LED_CON0) & ~DANUBE_LED_EDGE_MASK, DANUBE_LED_CON0); - writel(readl(DANUBE_LED_CON0) | DANUBE_LED_CLK_EDGE, DANUBE_LED_CON0); - - /* per default leds 15-0 are set */ - writel(DANUBE_LED_GROUP1 | DANUBE_LED_GROUP0, DANUBE_LED_CON1); - - /* leds are update periodically by the FPID */ - writel(readl(DANUBE_LED_CON1) & ~DANUBE_LED_UPD_MASK, DANUBE_LED_CON1); - writel(readl(DANUBE_LED_CON1) | DANUBE_LED_UPD_SRC_FPI, DANUBE_LED_CON1); - - /* set led update speed */ - writel(readl(DANUBE_LED_CON1) & ~DANUBE_LED_MASK, DANUBE_LED_CON1); - writel(readl(DANUBE_LED_CON1) | DANUBE_LED_SPEED, DANUBE_LED_CON1); - - /* adsl 0 and 1 leds are updated by the arc */ - writel(readl(DANUBE_LED_CON0) | DANUBE_LED_ADSL_SRC, DANUBE_LED_CON0); - - /* per default, the leds are turned on */ - danube_pmu_enable(DANUBE_PMU_PWDCR_LED); - - danube_led_major = register_chrdev(0, "danube_led", &danube_led_fops); - - if (!danube_led_major) - { - printk("danube_led: Error! Could not register device. %d\n", danube_led_major); - ret = -EINVAL; - - goto out; - } - - printk(KERN_INFO "danube_led : device registered on major %d\n", danube_led_major); - -out: - return ret; -} - -void __exit -danube_led_exit (void) -{ - unregister_chrdev(danube_led_major, "danube_led"); -} - -module_init(danube_led_init); -module_exit(danube_led_exit); diff --git a/target/linux/danube/files/drivers/char/danube_ssc.c b/target/linux/danube/files/drivers/char/danube_ssc.c deleted file mode 100644 index 1f90dac595..0000000000 --- a/target/linux/danube/files/drivers/char/danube_ssc.c +++ /dev/null @@ -1,1533 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2006 infineon - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ - -// ### TO DO: general issues: -// - power management -// - interrupt handling (direct/indirect) -// - pin/mux-handling (just overall concept due to project dependency) -// - multiple instances capability -// - slave functionality - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fs.h> -#include <linux/proc_fs.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/spinlock.h> -#include <linux/slab.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/bitops.h> - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/version.h> - -#include <asm/danube/danube.h> -#include <asm/danube/danube_irq.h> -#include <asm/danube/ifx_ssc_defines.h> -#include <asm/danube/ifx_ssc.h> - -#ifdef SSC_FRAME_INT_ENABLE -#undef SSC_FRAME_INT_ENABLE -#endif - -#define not_yet - -#define SPI_VINETIC - - - -/* allow the user to set the major device number */ -static int maj = 0; - -/* - * This is the per-channel data structure containing pointers, flags - * and variables for the port. This driver supports a maximum of PORT_CNT. - * isp is allocated in ifx_ssc_init() based on the chip version. - */ -static struct ifx_ssc_port *isp; - -/* prototypes for fops */ -static ssize_t ifx_ssc_read (struct file *, char *, size_t, loff_t *); -static ssize_t ifx_ssc_write (struct file *, const char *, size_t, loff_t *); -//static unsigned int ifx_ssc_poll(struct file *, struct poll_table_struct *); -int ifx_ssc_ioctl (struct inode *, struct file *, unsigned int, - unsigned long); -int ifx_ssc_open (struct inode *, struct file *); -int ifx_ssc_close (struct inode *, struct file *); - -/* other forward declarations */ -static unsigned int ifx_ssc_get_kernel_clk (struct ifx_ssc_port *info); -static void tx_int (struct ifx_ssc_port *); -static int ifx_ssc1_read_proc (char *, char **, off_t, int, int *, void *); - -extern unsigned int danube_get_fpi_hz (void); -extern void mask_and_ack_danube_irq (unsigned int irq_nr); - -static struct file_operations ifx_ssc_fops = { - .owner = THIS_MODULE, - .read = ifx_ssc_read, - .write = ifx_ssc_write, - .ioctl = ifx_ssc_ioctl, - .open = ifx_ssc_open, - .release = ifx_ssc_close, -}; - -static inline unsigned int -ifx_ssc_get_kernel_clk (struct ifx_ssc_port *info) -{ - unsigned int rmc; - - rmc = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_CLC) & IFX_CLC_RUN_DIVIDER_MASK) >> IFX_CLC_RUN_DIVIDER_OFFSET; - if (rmc == 0) - { - printk ("ifx_ssc_get_kernel_clk rmc==0 \n"); - return 0; - } - return danube_get_fpi_hz () / rmc; -} - -#ifndef not_yet -#ifdef IFX_SSC_INT_USE_BH -/* - * This routine is used by the interrupt handler to schedule - * processing in the software interrupt portion of the driver - * (also known as the "bottom half"). This can be called any - * number of times for any channel without harm. - */ -static inline void -ifx_ssc_sched_event (struct ifx_ssc_port *info, int event) -{ - info->event |= 1 << event; /* remember what kind of event and who */ - queue_task (&info->tqueue, &tq_cyclades); /* it belongs to */ - mark_bh (CYCLADES_BH); /* then trigger event */ -} - -static void -do_softint (void *private_) -{ - struct ifx_ssc_port *info = (struct ifx_ssc_port *) private_; - - if (test_and_clear_bit (Cy_EVENT_HANGUP, &info->event)) - { - wake_up_interruptible (&info->open_wait); - info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CALLOUT_ACTIVE); - } - - if (test_and_clear_bit (Cy_EVENT_OPEN_WAKEUP, &info->event)) - wake_up_interruptible (&info->open_wait); - - if (test_and_clear_bit (Cy_EVENT_DELTA_WAKEUP, &info->event)) - wake_up_interruptible (&info->delta_msr_wait); - - if (test_and_clear_bit (Cy_EVENT_WRITE_WAKEUP, &info->event)) - wake_up_interruptible (&tty->write_wait); -#ifdef Z_WAKE - if (test_and_clear_bit (Cy_EVENT_SHUTDOWN_WAKEUP, &info->event)) - wake_up_interruptible (&info->shutdown_wait); -#endif -} -#endif -#endif - -inline static void -rx_int (struct ifx_ssc_port *info) -{ - int fifo_fill_lev, bytes_in_buf, i; - unsigned long tmp_val; - unsigned long *tmp_ptr; - unsigned int rx_valid_cnt; - /* number of words waiting in the RX FIFO */ - fifo_fill_lev = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_FSTAT) & IFX_SSC_FSTAT_RECEIVED_WORDS_MASK) >> IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET; - // Note: There are always 32 bits in a fifo-entry except for the last - // word of a contigous transfer block and except for not in rx-only - // mode and CON.ENBV set. But for this case it should be a convention - // in software which helps: - // In tx or rx/tx mode all transfers from the buffer to the FIFO are - // 32-bit wide, except for the last three bytes, which could be a - // combination of 16- and 8-bit access. - // => The whole block is received as 32-bit words as a contigous stream, - // even if there was a gap in tx which has the fifo run out of data! - // Just the last fifo entry *may* be partially filled (0, 1, 2 or 3 bytes)! - - /* free space in the RX buffer */ - bytes_in_buf = info->rxbuf_end - info->rxbuf_ptr; - // transfer with 32 bits per entry - while ((bytes_in_buf >= 4) && (fifo_fill_lev > 0)) { - tmp_ptr = (unsigned long *) info->rxbuf_ptr; - *tmp_ptr = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_RB); - info->rxbuf_ptr += 4; - info->stats.rxBytes += 4; - fifo_fill_lev--; - bytes_in_buf -= 4; - } - - // now do the rest as mentioned in STATE.RXBV - while ((bytes_in_buf > 0) && (fifo_fill_lev > 0)) { - rx_valid_cnt = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET; - if (rx_valid_cnt == 0) - break; - - if (rx_valid_cnt > bytes_in_buf) - rx_valid_cnt = bytes_in_buf; - - tmp_val = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_RB); - - for (i = 0; i < rx_valid_cnt; i++) - { - *info->rxbuf_ptr = (tmp_val >> (8 * (rx_valid_cnt - i - 1))) & 0xff; - bytes_in_buf--; - info->rxbuf_ptr++; - } - info->stats.rxBytes += rx_valid_cnt; - } - - // check if transfer is complete - if (info->rxbuf_ptr >= info->rxbuf_end) - { - disable_irq(info->rxirq); - wake_up_interruptible (&info->rwait); - } else if ((info->opts.modeRxTx == IFX_SSC_MODE_RX) && (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_RXCNT) == 0)) - { - if (info->rxbuf_end - info->rxbuf_ptr < IFX_SSC_RXREQ_BLOCK_SIZE) - WRITE_PERIPHERAL_REGISTER ((info->rxbuf_end - info->rxbuf_ptr) << IFX_SSC_RXREQ_RXCOUNT_OFFSET, info->mapbase + IFX_SSC_RXREQ); - else - WRITE_PERIPHERAL_REGISTER (IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, info->mapbase + IFX_SSC_RXREQ); - } -} - -inline static void -tx_int (struct ifx_ssc_port *info) -{ - - int fifo_space, fill, i; - fifo_space = ((READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_ID) & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET) - - ((READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_FSTAT) & IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK) >> IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET); - - if (fifo_space == 0) - return; - - fill = info->txbuf_end - info->txbuf_ptr; - - if (fill > fifo_space * 4) - fill = fifo_space * 4; - - for (i = 0; i < fill / 4; i++) - { - // at first 32 bit access - WRITE_PERIPHERAL_REGISTER (*(UINT32 *) info->txbuf_ptr, info->mapbase + IFX_SSC_TB); - info->txbuf_ptr += 4; - } - - fifo_space -= fill / 4; - info->stats.txBytes += fill & ~0x3; - fill &= 0x3; - if ((fifo_space > 0) & (fill > 1)) - { - // trailing 16 bit access - WRITE_PERIPHERAL_REGISTER_16 (*(UINT16 *) info->txbuf_ptr, info->mapbase + IFX_SSC_TB); - info->txbuf_ptr += 2; - info->stats.txBytes += 2; - fifo_space--; - fill -= 2; - } - - if ((fifo_space > 0) & (fill > 0)) - { - // trailing 8 bit access - WRITE_PERIPHERAL_REGISTER_8 (*(UINT8 *) info->txbuf_ptr, info->mapbase + IFX_SSC_TB); - info->txbuf_ptr++; - info->stats.txBytes++; - } - - // check if transmission complete - if (info->txbuf_ptr >= info->txbuf_end) - { - disable_irq(info->txirq); - kfree (info->txbuf); - info->txbuf = NULL; - } - -} - -irqreturn_t -ifx_ssc_rx_int (int irq, void *dev_id) -{ - struct ifx_ssc_port *info = (struct ifx_ssc_port *) dev_id; - rx_int (info); - - return IRQ_HANDLED; -} - -irqreturn_t -ifx_ssc_tx_int (int irq, void *dev_id) -{ - struct ifx_ssc_port *info = (struct ifx_ssc_port *) dev_id; - tx_int (info); - - return IRQ_HANDLED; -} - -irqreturn_t -ifx_ssc_err_int (int irq, void *dev_id) -{ - struct ifx_ssc_port *info = (struct ifx_ssc_port *) dev_id; - unsigned int state; - unsigned int write_back = 0; - unsigned long flags; - - local_irq_save (flags); - state = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE); - - if ((state & IFX_SSC_STATE_RX_UFL) != 0) { - info->stats.rxUnErr++; - write_back |= IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR; - } - - if ((state & IFX_SSC_STATE_RX_OFL) != 0) { - info->stats.rxOvErr++; - write_back |= IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR; - } - - if ((state & IFX_SSC_STATE_TX_OFL) != 0) { - info->stats.txOvErr++; - write_back |= IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR; - } - - if ((state & IFX_SSC_STATE_TX_UFL) != 0) { - info->stats.txUnErr++; - write_back |= IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR; - } - - if ((state & IFX_SSC_STATE_MODE_ERR) != 0) { - info->stats.modeErr++; - write_back |= IFX_SSC_WHBSTATE_CLR_MODE_ERROR; - } - - if (write_back) - WRITE_PERIPHERAL_REGISTER (write_back, info->mapbase + IFX_SSC_WHBSTATE); - - local_irq_restore (flags); - - return IRQ_HANDLED; -} - -static void -ifx_ssc_abort (struct ifx_ssc_port *info) -{ - unsigned long flags; - bool enabled; - - local_irq_save (flags); - - disable_irq(info->rxirq); - disable_irq(info->txirq); - disable_irq(info->errirq); - - local_irq_restore (flags); - - // disable SSC (also aborts a receive request!) - // ### TO DO: Perhaps it's better to abort after the receiption of a - // complete word. The disable cuts the transmission immediatly and - // releases the chip selects. This could result in unpredictable - // behavior of connected external devices! - enabled = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_IS_ENABLED) != 0; - WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE, info->mapbase + IFX_SSC_WHBSTATE); - - // flush fifos - WRITE_PERIPHERAL_REGISTER (IFX_SSC_XFCON_FIFO_FLUSH, info->mapbase + IFX_SSC_TXFCON); - WRITE_PERIPHERAL_REGISTER (IFX_SSC_XFCON_FIFO_FLUSH, info->mapbase + IFX_SSC_RXFCON); - - // free txbuf - if (info->txbuf != NULL) - { - kfree (info->txbuf); - info->txbuf = NULL; - } - - // wakeup read process - if (info->rxbuf != NULL) - wake_up_interruptible (&info->rwait); - - // clear pending int's - mask_and_ack_danube_irq(info->rxirq); - mask_and_ack_danube_irq(info->txirq); - mask_and_ack_danube_irq(info->errirq); - - // clear error flags - WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ALL_ERROR, info->mapbase + IFX_SSC_WHBSTATE); - - if (enabled) - WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_ENABLE, info->mapbase + IFX_SSC_WHBSTATE); - -} - -/* - * This routine is called whenever a port is opened. It enforces - * exclusive opening of a port and enables interrupts, etc. - */ -int -ifx_ssc_open (struct inode *inode, struct file *filp) -{ - struct ifx_ssc_port *info; - int line; - int from_kernel = 0; - - if ((inode == (struct inode *) 0) || (inode == (struct inode *) 1)) { - from_kernel = 1; - line = (int) inode; - } else { - line = MINOR (filp->f_dentry->d_inode->i_rdev); - filp->f_op = &ifx_ssc_fops; - } - - /* don't open more minor devices than we can support */ - if (line < 0 || line >= PORT_CNT) - return -ENXIO; - - info = &isp[line]; - - /* exclusive open */ - if (info->port_is_open != 0) - return -EBUSY; - info->port_is_open++; - - disable_irq(info->rxirq); - disable_irq(info->txirq); - disable_irq(info->errirq); - - /* Flush and enable TX/RX FIFO */ - WRITE_PERIPHERAL_REGISTER ((IFX_SSC_DEF_TXFIFO_FL << IFX_SSC_XFCON_ITL_OFFSET) | IFX_SSC_XFCON_FIFO_FLUSH | IFX_SSC_XFCON_FIFO_ENABLE, info->mapbase + IFX_SSC_TXFCON); - WRITE_PERIPHERAL_REGISTER ((IFX_SSC_DEF_RXFIFO_FL << IFX_SSC_XFCON_ITL_OFFSET) | IFX_SSC_XFCON_FIFO_FLUSH | IFX_SSC_XFCON_FIFO_ENABLE, info->mapbase + IFX_SSC_RXFCON); - - /* logically flush the software FIFOs */ - info->rxbuf_ptr = 0; - info->txbuf_ptr = 0; - - /* clear all error bits */ - WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ALL_ERROR, info->mapbase + IFX_SSC_WHBSTATE); - - // clear pending interrupts - mask_and_ack_danube_irq(info->rxirq); - mask_and_ack_danube_irq(info->txirq); - mask_and_ack_danube_irq(info->errirq); - - WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_ENABLE, info->mapbase + IFX_SSC_WHBSTATE); - - return 0; -} -EXPORT_SYMBOL(ifx_ssc_open); - -int -ifx_ssc_close (struct inode *inode, struct file *filp) -{ - struct ifx_ssc_port *info; - int idx; - - if ((inode == (struct inode *) 0) || (inode == (struct inode *) 1)) - idx = (int) inode; - else - idx = MINOR (filp->f_dentry->d_inode->i_rdev); - - if (idx < 0 || idx >= PORT_CNT) - return -ENXIO; - - info = &isp[idx]; - if (!info) - return -ENXIO; - - WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE, info->mapbase + IFX_SSC_WHBSTATE); - - ifx_ssc_abort(info); - - info->port_is_open--; - - return 0; -} -EXPORT_SYMBOL(ifx_ssc_close); - -static ssize_t -ifx_ssc_read_helper_poll (struct ifx_ssc_port *info, char *buf, size_t len, int from_kernel) -{ - ssize_t ret_val; - unsigned long flags; - - if (info->opts.modeRxTx == IFX_SSC_MODE_TX) - return -EFAULT; - local_irq_save (flags); - info->rxbuf_ptr = info->rxbuf; - info->rxbuf_end = info->rxbuf + len; - local_irq_restore (flags); - /* Vinetic driver always works in IFX_SSC_MODE_RXTX */ - /* TXRX in poll mode */ - while (info->rxbuf_ptr < info->rxbuf_end) - { - if (info->txbuf_ptr < info->txbuf_end) - tx_int (info); - - rx_int (info); - }; - - ret_val = info->rxbuf_ptr - info->rxbuf; - - return ret_val; -} - -static ssize_t -ifx_ssc_read_helper (struct ifx_ssc_port *info, char *buf, size_t len, int from_kernel) -{ - ssize_t ret_val; - unsigned long flags; - DECLARE_WAITQUEUE (wait, current); - - if (info->opts.modeRxTx == IFX_SSC_MODE_TX) - return -EFAULT; - - local_irq_save (flags); - info->rxbuf_ptr = info->rxbuf; - info->rxbuf_end = info->rxbuf + len; - - if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) - { - if ((info->txbuf == NULL) || (info->txbuf != info->txbuf_ptr) || (info->txbuf_end != len + info->txbuf)) - { - local_irq_restore (flags); - printk ("IFX SSC - %s: write must be called before calling " "read in combined RX/TX!\n", __func__); - return -EFAULT; - } - - local_irq_restore(flags); - tx_int (info); - - if (info->txbuf_ptr < info->txbuf_end) - enable_irq(info->txirq); - - enable_irq(info->rxirq); - } else { - local_irq_restore(flags); - if (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_RXCNT) & IFX_SSC_RXCNT_TODO_MASK) - return -EBUSY; - enable_irq(info->rxirq); - if (len < IFX_SSC_RXREQ_BLOCK_SIZE) - WRITE_PERIPHERAL_REGISTER (len << IFX_SSC_RXREQ_RXCOUNT_OFFSET, info->mapbase + IFX_SSC_RXREQ); - else - WRITE_PERIPHERAL_REGISTER (IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, info->mapbase + IFX_SSC_RXREQ); - } - - __add_wait_queue (&info->rwait, &wait); - set_current_state (TASK_INTERRUPTIBLE); - - do { - local_irq_save (flags); - if (info->rxbuf_ptr >= info->rxbuf_end) - break; - - local_irq_restore (flags); - - if (signal_pending (current)) - { - ret_val = -ERESTARTSYS; - goto out; - } - schedule(); - } while (1); - - ret_val = info->rxbuf_ptr - info->rxbuf; - local_irq_restore (flags); - -out: - current->state = TASK_RUNNING; - __remove_wait_queue (&info->rwait, &wait); - - return (ret_val); -} - -static ssize_t -ifx_ssc_write_helper (struct ifx_ssc_port *info, const char *buf, - size_t len, int from_kernel) -{ - if (info->opts.modeRxTx == IFX_SSC_MODE_RX) - return -EFAULT; - - info->txbuf_ptr = info->txbuf; - info->txbuf_end = len + info->txbuf; - if (info->opts.modeRxTx == IFX_SSC_MODE_TX) - { - tx_int (info); - if (info->txbuf_ptr < info->txbuf_end) - { - enable_irq(info->txirq); - } - } - - return len; -} - -ssize_t -ifx_ssc_kread (int port, char *kbuf, size_t len) -{ - struct ifx_ssc_port *info; - ssize_t ret_val; - - if (port < 0 || port >= PORT_CNT) - return -ENXIO; - - if (len == 0) - return 0; - - info = &isp[port]; - - if (info->rxbuf != NULL) - { - printk ("SSC device busy\n"); - return -EBUSY; - } - - info->rxbuf = kbuf; - if (info->rxbuf == NULL) - { - printk ("SSC device error\n"); - return -EINVAL; - } - - ret_val = ifx_ssc_read_helper_poll (info, kbuf, len, 1); - info->rxbuf = NULL; - - disable_irq(info->rxirq); - - return ret_val; -} -EXPORT_SYMBOL(ifx_ssc_kread); - -ssize_t -ifx_ssc_kwrite (int port, const char *kbuf, size_t len) -{ - struct ifx_ssc_port *info; - ssize_t ret_val; - - if (port < 0 || port >= PORT_CNT) - return -ENXIO; - - if (len == 0) - return 0; - - info = &isp[port]; - - // check if transmission in progress - if (info->txbuf != NULL) - return -EBUSY; - - info->txbuf = (char *) kbuf; - - ret_val = ifx_ssc_write_helper (info, info->txbuf, len, 1); - - if (ret_val < 0) - info->txbuf = NULL; - - return ret_val; -} -EXPORT_SYMBOL(ifx_ssc_kwrite); - -static ssize_t -ifx_ssc_read (struct file *filp, char *ubuf, size_t len, loff_t * off) -{ - ssize_t ret_val; - int idx; - struct ifx_ssc_port *info; - - idx = MINOR (filp->f_dentry->d_inode->i_rdev); - info = &isp[idx]; - - if (info->rxbuf != NULL) - return -EBUSY; - - info->rxbuf = kmalloc (len + 3, GFP_KERNEL); - if (info->rxbuf == NULL) - return -ENOMEM; - - ret_val = ifx_ssc_read_helper (info, info->rxbuf, len, 0); - if (copy_to_user ((void *) ubuf, info->rxbuf, ret_val) != 0) - ret_val = -EFAULT; - - disable_irq(info->rxirq); - - kfree (info->rxbuf); - info->rxbuf = NULL; - - return (ret_val); -} - -static ssize_t -ifx_ssc_write (struct file *filp, const char *ubuf, size_t len, loff_t * off) -{ - int idx; - struct ifx_ssc_port *info; - int ret_val; - - if (len == 0) - return (0); - - idx = MINOR (filp->f_dentry->d_inode->i_rdev); - info = &isp[idx]; - - if (info->txbuf != NULL) - return -EBUSY; - - info->txbuf = kmalloc (len + 3, GFP_KERNEL); - if (info->txbuf == NULL) - return -ENOMEM; - - ret_val = copy_from_user (info->txbuf, ubuf, len); - if (ret_val == 0) - ret_val = ifx_ssc_write_helper (info, info->txbuf, len, 0); - else - ret_val = -EFAULT; - - if (ret_val < 0) - { - kfree (info->txbuf); - info->txbuf = NULL; - } - - return (ret_val); -} - -static struct ifx_ssc_frm_status * -ifx_ssc_frm_status_get (struct ifx_ssc_port *info) -{ - unsigned long tmp; - - tmp = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_SFSTAT); - info->frm_status.DataBusy = (tmp & IFX_SSC_SFSTAT_IN_DATA) > 0; - info->frm_status.PauseBusy = (tmp & IFX_SSC_SFSTAT_IN_PAUSE) > 0; - info->frm_status.DataCount = (tmp & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET; - info->frm_status.PauseCount = (tmp & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET; - tmp = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_SFCON); - info->frm_status.EnIntAfterData = (tmp & IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE) > 0; - info->frm_status.EnIntAfterPause = (tmp & IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE) > 0; - - return &info->frm_status; -} - - -static struct ifx_ssc_frm_opts * -ifx_ssc_frm_control_get (struct ifx_ssc_port *info) -{ - unsigned long tmp; - - tmp = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_SFCON); - info->frm_opts.FrameEnable = (tmp & IFX_SSC_SFCON_SF_ENABLE) > 0; - info->frm_opts.DataLength = (tmp & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET; - info->frm_opts.PauseLength = (tmp & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET; - info->frm_opts.IdleData = (tmp & IFX_SSC_SFCON_PAUSE_DATA_MASK) >> IFX_SSC_SFCON_PAUSE_DATA_OFFSET; - info->frm_opts.IdleClock = (tmp & IFX_SSC_SFCON_PAUSE_CLOCK_MASK) >> IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET; - info->frm_opts.StopAfterPause = (tmp & IFX_SSC_SFCON_STOP_AFTER_PAUSE) > 0; - - return &info->frm_opts; -} - -static int -ifx_ssc_frm_control_set (struct ifx_ssc_port *info) -{ - unsigned long tmp; - - // check parameters - if ((info->frm_opts.DataLength > IFX_SSC_SFCON_DATA_LENGTH_MAX) - || (info->frm_opts.DataLength < 1) - || (info->frm_opts.PauseLength > IFX_SSC_SFCON_PAUSE_LENGTH_MAX) - || (info->frm_opts.PauseLength < 1) - || (info->frm_opts.IdleData & ~(IFX_SSC_SFCON_PAUSE_DATA_MASK >> IFX_SSC_SFCON_PAUSE_DATA_OFFSET)) - || (info->frm_opts.IdleClock & ~(IFX_SSC_SFCON_PAUSE_CLOCK_MASK >> IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET))) - return -EINVAL; - - // read interrupt bits (they're not changed here) - tmp = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_SFCON) & - (IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE | IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE); - - // set all values with respect to it's bit position (for data and pause - // length set N-1) - tmp = (info->frm_opts.DataLength - 1) << IFX_SSC_SFCON_DATA_LENGTH_OFFSET; - tmp |= (info->frm_opts.PauseLength - 1) << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET; - tmp |= info->frm_opts.IdleData << IFX_SSC_SFCON_PAUSE_DATA_OFFSET; - tmp |= info->frm_opts.IdleClock << IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET; - tmp |= info->frm_opts.FrameEnable * IFX_SSC_SFCON_SF_ENABLE; - tmp |= info->frm_opts.StopAfterPause * IFX_SSC_SFCON_STOP_AFTER_PAUSE; - - WRITE_PERIPHERAL_REGISTER(tmp, info->mapbase + IFX_SSC_SFCON); - - return 0; -} - -static int -ifx_ssc_rxtx_mode_set (struct ifx_ssc_port *info, unsigned int val) -{ - unsigned long tmp; - - if (!(info) || (val & ~(IFX_SSC_MODE_MASK))) - return -EINVAL; - - if ((READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_BUSY) - || (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_RXCNT) & IFX_SSC_RXCNT_TODO_MASK)) - return -EBUSY; - - tmp = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_CON) & ~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF)) | (val); - WRITE_PERIPHERAL_REGISTER (tmp, info->mapbase + IFX_SSC_CON); - info->opts.modeRxTx = val; - - return 0; -} - -static int -ifx_ssc_sethwopts (struct ifx_ssc_port *info) -{ - unsigned long flags, bits; - struct ifx_ssc_hwopts *opts = &info->opts; - - if ((opts->dataWidth < IFX_SSC_MIN_DATA_WIDTH) - || (opts->dataWidth > IFX_SSC_MAX_DATA_WIDTH)) - return -EINVAL; - - bits = (opts->dataWidth - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET; - bits |= IFX_SSC_CON_ENABLE_BYTE_VALID; - - if (opts->rxOvErrDetect) - bits |= IFX_SSC_CON_RX_OFL_CHECK; - if (opts->rxUndErrDetect) - bits |= IFX_SSC_CON_RX_UFL_CHECK; - if (opts->txOvErrDetect) - bits |= IFX_SSC_CON_TX_OFL_CHECK; - if (opts->txUndErrDetect) - bits |= IFX_SSC_CON_TX_UFL_CHECK; - if (opts->loopBack) - bits |= IFX_SSC_CON_LOOPBACK_MODE; - if (opts->echoMode) - bits |= IFX_SSC_CON_ECHO_MODE_ON; - if (opts->headingControl) - bits |= IFX_SSC_CON_MSB_FIRST; - if (opts->clockPhase) - bits |= IFX_SSC_CON_LATCH_THEN_SHIFT; - if (opts->clockPolarity) - bits |= IFX_SSC_CON_CLOCK_FALL; - - switch (opts->modeRxTx) - { - case IFX_SSC_MODE_TX: - bits |= IFX_SSC_CON_RX_OFF; - break; - case IFX_SSC_MODE_RX: - bits |= IFX_SSC_CON_TX_OFF; - break; - } - - local_irq_save (flags); - - WRITE_PERIPHERAL_REGISTER (bits, info->mapbase + IFX_SSC_CON); - WRITE_PERIPHERAL_REGISTER ((info->opts.gpoCs << IFX_SSC_GPOCON_ISCSB0_POS) | - (info->opts.gpoInv << IFX_SSC_GPOCON_INVOUT0_POS), info->mapbase + IFX_SSC_GPOCON); - - WRITE_PERIPHERAL_REGISTER (info->opts.gpoCs << IFX_SSC_WHBGPOSTAT_SETOUT0_POS, info->mapbase + IFX_SSC_WHBGPOSTAT); - - //master mode - if (opts->masterSelect) - WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_MASTER_SELECT, info->mapbase + IFX_SSC_WHBSTATE); - else - WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_MASTER_SELECT, info->mapbase + IFX_SSC_WHBSTATE); - - // init serial framing - WRITE_PERIPHERAL_REGISTER (0, info->mapbase + IFX_SSC_SFCON); - /* set up the port pins */ - //check for general requirements to switch (external) pad/pin characteristics - /* TODO: P0.9 SPI_CS4, P0.10 SPI_CS5, P 0.11 SPI_CS6, because of ASC0 */ - /* p0.15 SPI_CS1(EEPROM), P0.13 SPI_CS3, */ - /* Set p0.15 to alternative 01, others to 00 (In/OUT) */ - *(DANUBE_GPIO_P0_DIR) = (*DANUBE_GPIO_P0_DIR) | (0xA000); - *(DANUBE_GPIO_P0_ALTSEL0) = (((*DANUBE_GPIO_P0_ALTSEL0) | (0x8000)) & (~(0x2000))); - *(DANUBE_GPIO_P0_ALTSEL1) = (((*DANUBE_GPIO_P0_ALTSEL1) & (~0x8000)) & (~(0x2000))); - *(DANUBE_GPIO_P0_OD) = (*DANUBE_GPIO_P0_OD) | 0xA000; - - /* p1.6 SPI_CS2(SFLASH), p1.0 SPI_DIN, p1.1 SPI_DOUT, p1.2 SPI_CLK */ - *(DANUBE_GPIO_P1_DIR) = ((*DANUBE_GPIO_P1_DIR) | (0x46)) & (~1); - *(DANUBE_GPIO_P1_ALTSEL0) = ((*DANUBE_GPIO_P1_ALTSEL0) | (0x47)); - *(DANUBE_GPIO_P1_ALTSEL1) = (*DANUBE_GPIO_P1_ALTSEL1) & (~0x47); - *(DANUBE_GPIO_P1_OD) = (*DANUBE_GPIO_P1_OD) | 0x0046; - - /*CS3 */ - /*TODO: CS4 CS5 CS6 */ - *DANUBE_GPIO_P0_OUT = ((*DANUBE_GPIO_P0_OUT) | 0x2000); - - local_irq_restore (flags); - - return 0; -} - -static int -ifx_ssc_set_baud (struct ifx_ssc_port *info, unsigned int baud) -{ - unsigned int ifx_ssc_clock; - unsigned int br; - unsigned long flags; - bool enabled; - int retval = 0; - - ifx_ssc_clock = ifx_ssc_get_kernel_clk(info); - if (ifx_ssc_clock == 0) - { - retval = -EINVAL; - goto out; - } - - local_irq_save (flags); - - enabled = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_IS_ENABLED); - WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE, info->mapbase + IFX_SSC_WHBSTATE); - - br = (((ifx_ssc_clock >> 1) + baud / 2) / baud) - 1; - wmb(); - - if (br > 0xffff || ((br == 0) && - ((READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_IS_MASTER) == 0))) { - local_irq_restore (flags); - printk ("%s: invalid baudrate %u\n", __func__, baud); - return -EINVAL; - } - - WRITE_PERIPHERAL_REGISTER (br, info->mapbase + IFX_SSC_BR); - - if (enabled) - WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_ENABLE, info->mapbase + IFX_SSC_WHBSTATE); - - local_irq_restore(flags); - -out: - return retval; -} - -static int -ifx_ssc_hwinit (struct ifx_ssc_port *info) -{ - unsigned long flags; - bool enabled; - - enabled = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_IS_ENABLED); - WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE, info->mapbase + IFX_SSC_WHBSTATE); - - if (ifx_ssc_sethwopts (info) < 0) - { - printk ("%s: setting the hardware options failed\n", __func__); - return -EINVAL; - } - - if (ifx_ssc_set_baud (info, info->baud) < 0) - { - printk ("%s: setting the baud rate failed\n", __func__); - return -EINVAL; - } - - local_irq_save (flags); - - /* TX FIFO */ - WRITE_PERIPHERAL_REGISTER ((IFX_SSC_DEF_TXFIFO_FL << IFX_SSC_XFCON_ITL_OFFSET) | IFX_SSC_XFCON_FIFO_ENABLE, - info->mapbase + IFX_SSC_TXFCON); - /* RX FIFO */ - WRITE_PERIPHERAL_REGISTER ((IFX_SSC_DEF_RXFIFO_FL << IFX_SSC_XFCON_ITL_OFFSET) | IFX_SSC_XFCON_FIFO_ENABLE, - info->mapbase + IFX_SSC_RXFCON); - - local_irq_restore (flags); - - if (enabled) - WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_ENABLE, info->mapbase + IFX_SSC_WHBSTATE); - - return 0; -} - -int -ifx_ssc_ioctl (struct inode *inode, struct file *filp, unsigned int cmd, unsigned long data) -{ - struct ifx_ssc_port *info; - int line, ret_val = 0; - unsigned long flags; - unsigned long tmp; - int from_kernel = 0; - - if ((inode == (struct inode *) 0) || (inode == (struct inode *) 1)) - { - from_kernel = 1; - line = (int) inode; - } else { - line = MINOR (filp->f_dentry->d_inode->i_rdev); - } - - if (line < 0 || line >= PORT_CNT) - return -ENXIO; - - info = &isp[line]; - - switch (cmd) - { - case IFX_SSC_STATS_READ: - /* data must be a pointer to a struct ifx_ssc_statistics */ - if (from_kernel) - memcpy ((void *) data, (void *) &info->stats, - sizeof (struct ifx_ssc_statistics)); - else if (copy_to_user ((void *) data, - (void *) &info->stats, - sizeof (struct ifx_ssc_statistics))) - ret_val = -EFAULT; - break; - case IFX_SSC_STATS_RESET: - /* just resets the statistics counters */ - memset ((void *) &info->stats, 0, - sizeof (struct ifx_ssc_statistics)); - break; - case IFX_SSC_BAUD_SET: - /* if the buffers are not empty then the port is */ - /* busy and we shouldn't change things on-the-fly! */ - if (!info->txbuf || !info->rxbuf || - (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) - & IFX_SSC_STATE_BUSY)) { - ret_val = -EBUSY; - break; - } - /* misuse flags */ - if (from_kernel) - flags = *((unsigned long *) data); - else if (copy_from_user ((void *) &flags, - (void *) data, sizeof (flags))) { - ret_val = -EFAULT; - break; - } - if (flags == 0) { - ret_val = -EINVAL; - break; - } - if (ifx_ssc_set_baud (info, flags) < 0) { - ret_val = -EINVAL; - break; - } - info->baud = flags; - break; - case IFX_SSC_BAUD_GET: - if (from_kernel) - *((unsigned int *) data) = info->baud; - else if (copy_to_user ((void *) data, - (void *) &info->baud, - sizeof (unsigned long))) - ret_val = -EFAULT; - break; - case IFX_SSC_RXTX_MODE_SET: - if (from_kernel) - tmp = *((unsigned long *) data); - else if (copy_from_user ((void *) &tmp, - (void *) data, sizeof (tmp))) { - ret_val = -EFAULT; - break; - } - ret_val = ifx_ssc_rxtx_mode_set (info, tmp); - break; - case IFX_SSC_RXTX_MODE_GET: - tmp = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_CON) & - (~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF)); - if (from_kernel) - *((unsigned int *) data) = tmp; - else if (copy_to_user ((void *) data, - (void *) &tmp, sizeof (tmp))) - ret_val = -EFAULT; - break; - - case IFX_SSC_ABORT: - ifx_ssc_abort (info); - break; - - case IFX_SSC_GPO_OUT_SET: - if (from_kernel) - tmp = *((unsigned long *) data); - else if (copy_from_user ((void *) &tmp, - (void *) data, sizeof (tmp))) { - ret_val = -EFAULT; - break; - } - if (tmp > IFX_SSC_MAX_GPO_OUT) - ret_val = -EINVAL; - else - WRITE_PERIPHERAL_REGISTER - (1 << (tmp + IFX_SSC_WHBGPOSTAT_SETOUT0_POS), - info->mapbase + IFX_SSC_WHBGPOSTAT); - break; - case IFX_SSC_GPO_OUT_CLR: - if (from_kernel) - tmp = *((unsigned long *) data); - else if (copy_from_user ((void *) &tmp, - (void *) data, sizeof (tmp))) { - ret_val = -EFAULT; - break; - } - if (tmp > IFX_SSC_MAX_GPO_OUT) - ret_val = -EINVAL; - else { - WRITE_PERIPHERAL_REGISTER - (1 << (tmp + IFX_SSC_WHBGPOSTAT_CLROUT0_POS), - info->mapbase + IFX_SSC_WHBGPOSTAT); - } - break; - case IFX_SSC_GPO_OUT_GET: - tmp = READ_PERIPHERAL_REGISTER - (info->mapbase + IFX_SSC_GPOSTAT); - if (from_kernel) - *((unsigned int *) data) = tmp; - else if (copy_to_user ((void *) data, - (void *) &tmp, sizeof (tmp))) - ret_val = -EFAULT; - break; - case IFX_SSC_FRM_STATUS_GET: - ifx_ssc_frm_status_get (info); - if (from_kernel) - memcpy ((void *) data, (void *) &info->frm_status, - sizeof (struct ifx_ssc_frm_status)); - else if (copy_to_user ((void *) data, - (void *) &info->frm_status, - sizeof (struct ifx_ssc_frm_status))) - ret_val = -EFAULT; - break; - case IFX_SSC_FRM_CONTROL_GET: - ifx_ssc_frm_control_get (info); - if (from_kernel) - memcpy ((void *) data, (void *) &info->frm_opts, - sizeof (struct ifx_ssc_frm_opts)); - else if (copy_to_user ((void *) data, - (void *) &info->frm_opts, - sizeof (struct ifx_ssc_frm_opts))) - ret_val = -EFAULT; - break; - case IFX_SSC_FRM_CONTROL_SET: - if (from_kernel) - memcpy ((void *) &info->frm_opts, (void *) data, - sizeof (struct ifx_ssc_frm_opts)); - else if (copy_to_user ((void *) &info->frm_opts, - (void *) data, - sizeof (struct ifx_ssc_frm_opts))) { - ret_val = -EFAULT; - break; - } - ret_val = ifx_ssc_frm_control_set (info); - break; - case IFX_SSC_HWOPTS_SET: - /* data must be a pointer to a struct ifx_ssc_hwopts */ - /* if the buffers are not empty then the port is */ - /* busy and we shouldn't change things on-the-fly! */ - if (!info->txbuf || !info->rxbuf || - (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) - & IFX_SSC_STATE_BUSY)) { - ret_val = -EBUSY; - break; - } - if (from_kernel) - memcpy ((void *) &info->opts, (void *) data, - sizeof (struct ifx_ssc_hwopts)); - else if (copy_from_user ((void *) &info->opts, - (void *) data, - sizeof (struct ifx_ssc_hwopts))) { - ret_val = -EFAULT; - break; - } - if (ifx_ssc_hwinit (info) < 0) { - ret_val = -EIO; - } - break; - case IFX_SSC_HWOPTS_GET: - /* data must be a pointer to a struct ifx_ssc_hwopts */ - if (from_kernel) - memcpy ((void *) data, (void *) &info->opts, - sizeof (struct ifx_ssc_hwopts)); - else if (copy_to_user ((void *) data, - (void *) &info->opts, - sizeof (struct ifx_ssc_hwopts))) - ret_val = -EFAULT; - break; - default: - ret_val = -ENOIOCTLCMD; - } - - return ret_val; -} -EXPORT_SYMBOL(ifx_ssc_ioctl); - -static int -ifx_ssc1_read_proc (char *page, char **start, off_t offset, int count, int *eof, void *data) -{ - int off = 0; - unsigned long flags; - - local_save_flags(flags); - local_irq_disable(); - - off += sprintf (page + off, "Statistics for Infineon Synchronous Serial Controller SSC1\n"); - off += sprintf (page + off, "RX overflow errors %d\n", isp[0].stats.rxOvErr); - off += sprintf (page + off, "RX underflow errors %d\n", isp[0].stats.rxUnErr); - off += sprintf (page + off, "TX overflow errors %d\n", isp[0].stats.txOvErr); - off += sprintf (page + off, "TX underflow errors %d\n", isp[0].stats.txUnErr); - off += sprintf (page + off, "Abort errors %d\n", isp[0].stats.abortErr); - off += sprintf (page + off, "Mode errors %d\n", isp[0].stats.modeErr); - off += sprintf (page + off, "RX Bytes %d\n", isp[0].stats.rxBytes); - off += sprintf (page + off, "TX Bytes %d\n", isp[0].stats.txBytes); - - local_irq_restore(flags); - *eof = 1; - - return off; -} - -int __init -ifx_ssc_init (void) -{ - struct ifx_ssc_port *info; - int i, nbytes; - unsigned long flags; - int ret_val; - - ret_val = -ENOMEM; - nbytes = PORT_CNT * sizeof(struct ifx_ssc_port); - isp = (struct ifx_ssc_port*)kmalloc(nbytes, GFP_KERNEL); - - if (isp == NULL) - { - printk("%s: no memory for isp\n", __func__); - return (ret_val); - } - memset(isp, 0, nbytes); - - ret_val = -ENXIO; - if ((i = register_chrdev (maj, "ssc", &ifx_ssc_fops)) < 0) - { - printk ("Unable to register major %d for the Infineon SSC\n", maj); - if (maj == 0) - { - goto errout; - } else { - maj = 0; - if ((i = register_chrdev (maj, "ssc", &ifx_ssc_fops)) < 0) - { - printk ("Unable to register major %d for the Infineon SSC\n", maj); - goto errout; - } - } - } - - if (maj == 0) - maj = i; - - /* set default values in ifx_ssc_port */ - for (i = 0; i < PORT_CNT; i++) { - info = &isp[i]; - info->port_nr = i; - /* default values for the HwOpts */ - info->opts.AbortErrDetect = IFX_SSC_DEF_ABRT_ERR_DETECT; - info->opts.rxOvErrDetect = IFX_SSC_DEF_RO_ERR_DETECT; - info->opts.rxUndErrDetect = IFX_SSC_DEF_RU_ERR_DETECT; - info->opts.txOvErrDetect = IFX_SSC_DEF_TO_ERR_DETECT; - info->opts.txUndErrDetect = IFX_SSC_DEF_TU_ERR_DETECT; - info->opts.loopBack = IFX_SSC_DEF_LOOP_BACK; - info->opts.echoMode = IFX_SSC_DEF_ECHO_MODE; - info->opts.idleValue = IFX_SSC_DEF_IDLE_DATA; - info->opts.clockPolarity = IFX_SSC_DEF_CLOCK_POLARITY; - info->opts.clockPhase = IFX_SSC_DEF_CLOCK_PHASE; - info->opts.headingControl = IFX_SSC_DEF_HEADING_CONTROL; - info->opts.dataWidth = IFX_SSC_DEF_DATA_WIDTH; - info->opts.modeRxTx = IFX_SSC_DEF_MODE_RXTX; - info->opts.gpoCs = IFX_SSC_DEF_GPO_CS; - info->opts.gpoInv = IFX_SSC_DEF_GPO_INV; - info->opts.masterSelect = IFX_SSC_DEF_MASTERSLAVE; - info->baud = IFX_SSC_DEF_BAUDRATE; - info->rxbuf = NULL; - info->txbuf = NULL; - /* values specific to SSC1 */ - if (i == 0) { - info->mapbase = DANUBE_SSC1_BASE_ADDR; - info->txirq = DANUBE_SSC_TIR; - info->rxirq = DANUBE_SSC_RIR; - info->errirq = DANUBE_SSC_EIR; - } - - WRITE_PERIPHERAL_REGISTER (IFX_SSC_DEF_RMC << IFX_CLC_RUN_DIVIDER_OFFSET, info->mapbase + IFX_SSC_CLC); - - init_waitqueue_head (&info->rwait); - - local_irq_save (flags); - - // init serial framing register - WRITE_PERIPHERAL_REGISTER (IFX_SSC_DEF_SFCON, info->mapbase + IFX_SSC_SFCON); - - ret_val = request_irq(info->txirq, ifx_ssc_tx_int, SA_INTERRUPT, "ifx_ssc_tx", info); - if (ret_val) - { - printk("%s: unable to get irq %d\n", __func__, info->txirq); - local_irq_restore(flags); - goto errout; - } - - ret_val = request_irq(info->rxirq, ifx_ssc_rx_int, SA_INTERRUPT, "ifx_ssc_rx", info); - if (ret_val) - { - printk ("%s: unable to get irq %d\n", __func__, info->rxirq); - local_irq_restore (flags); - goto irqerr; - } - - ret_val = request_irq(info->errirq, ifx_ssc_err_int, SA_INTERRUPT,"ifx_ssc_err", info); - if (ret_val) - { - printk ("%s: unable to get irq %d\n", __func__, info->errirq); - local_irq_restore (flags); - goto irqerr; - } - WRITE_PERIPHERAL_REGISTER (IFX_SSC_DEF_IRNEN, info->mapbase + IFX_SSC_IRN_EN); - - enable_irq(info->txirq); - enable_irq(info->rxirq); - enable_irq(info->errirq); - - local_irq_restore (flags); - } - - for (i = 0; i < PORT_CNT; i++) { - info = &isp[i]; - if (ifx_ssc_hwinit (info) < 0) - { - printk ("%s: hardware init failed for port %d\n", __func__, i); - goto irqerr; - } - } - - create_proc_read_entry ("driver/ssc1", 0, NULL, ifx_ssc1_read_proc, NULL); - - return 0; - -irqerr: - free_irq(isp[0].txirq, &isp[0]); - free_irq(isp[0].rxirq, &isp[0]); - free_irq(isp[0].errirq, &isp[0]); -errout: - kfree (isp); - return (ret_val); -} - -void -ifx_ssc_cleanup_module (void) -{ - int i; - - for (i = 0; i < PORT_CNT; i++) { - WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE, isp[i].mapbase + IFX_SSC_WHBSTATE); - free_irq(isp[i].txirq, &isp[i]); - free_irq(isp[i].rxirq, &isp[i]); - free_irq(isp[i].errirq, &isp[i]); - } - kfree (isp); - remove_proc_entry ("driver/ssc1", NULL); -} - -module_init(ifx_ssc_init); -module_exit(ifx_ssc_cleanup_module); - - -inline int -ifx_ssc_cs_low (u32 pin) -{ - int ret = 0; - if ((ret = ifx_ssc_ioctl ((struct inode *) 0, NULL, IFX_SSC_GPO_OUT_CLR, (unsigned long) &pin))) - printk ("clear CS %d fails\n", pin); - wmb (); - - return ret; -} -EXPORT_SYMBOL(ifx_ssc_cs_low); - -inline int -ifx_ssc_cs_high (u32 pin) -{ - int ret = 0; - if ((ret = ifx_ssc_ioctl((struct inode *) 0, NULL, IFX_SSC_GPO_OUT_SET, (unsigned long) &pin))) - printk ("set CS %d fails\n", pin); - wmb (); - - return ret; -} -EXPORT_SYMBOL(ifx_ssc_cs_high); - -static int -ssc_session (char *tx_buf, u32 tx_len, char *rx_buf, u32 rx_len) -{ - int ret = 0; - - char *ssc_tx_buf = NULL; - char *ssc_rx_buf = NULL; - int eff_size = 0; - u8 mode = 0; - - if (tx_buf == NULL && tx_len == 0 && rx_buf == NULL && rx_len == 0) { - printk ("invalid parameters\n"); - ret = -EINVAL; - goto ssc_session_exit; - } - else if (tx_buf == NULL || tx_len == 0) { - if (rx_buf != NULL && rx_len != 0) { - mode = IFX_SSC_MODE_RX; - } - else { - printk ("invalid parameters\n"); - ret = -EINVAL; - goto ssc_session_exit; - } - } - else if (rx_buf == NULL || rx_len == 0) { - if (tx_buf != NULL && tx_len != 0) { - mode = IFX_SSC_MODE_TX; - } - else { - printk ("invalid parameters\n"); - ret = -EINVAL; - goto ssc_session_exit; - } - } - else { - mode = IFX_SSC_MODE_RXTX; - } - - if (mode == IFX_SSC_MODE_RXTX) { - eff_size = tx_len + rx_len; - } - else if (mode == IFX_SSC_MODE_RX) { - eff_size = rx_len; - } - else { - eff_size = tx_len; - } - - //4 bytes alignment, required by driver - /* change by TaiCheng */ - //if (in_irq()){ - if (1) { - ssc_tx_buf = - (char *) kmalloc (sizeof (char) * - ((eff_size + 3) & (~3)), - GFP_ATOMIC); - ssc_rx_buf = - (char *) kmalloc (sizeof (char) * - ((eff_size + 3) & (~3)), - GFP_ATOMIC); - } - else { - ssc_tx_buf = - (char *) kmalloc (sizeof (char) * - ((eff_size + 3) & (~3)), - GFP_KERNEL); - ssc_rx_buf = - (char *) kmalloc (sizeof (char) * - ((eff_size + 3) & (~3)), - GFP_KERNEL); - } - if (ssc_tx_buf == NULL || ssc_rx_buf == NULL) { - printk ("no memory for size of %d\n", eff_size); - ret = -ENOMEM; - goto ssc_session_exit; - } - memset ((void *) ssc_tx_buf, 0, eff_size); - memset ((void *) ssc_rx_buf, 0, eff_size); - - if (tx_len > 0) { - memcpy (ssc_tx_buf, tx_buf, tx_len); - } - - ret = ifx_ssc_kwrite (0, ssc_tx_buf, eff_size); - - if (ret > 0) { - ssc_tx_buf = NULL; //should be freed by ifx_ssc_kwrite - } - - if (ret != eff_size) { - printk ("ifx_ssc_write return %d\n", ret); - goto ssc_session_exit; - } - ret = ifx_ssc_kread (0, ssc_rx_buf, eff_size); - if (ret != eff_size) { - printk ("ifx_ssc_read return %d\n", ret); - goto ssc_session_exit; - } - - memcpy (rx_buf, ssc_rx_buf + tx_len, rx_len); - - if (mode == IFX_SSC_MODE_TX) { - ret = tx_len; - } - else { - ret = rx_len; - } - ssc_session_exit: - - if (ssc_tx_buf != NULL) - kfree (ssc_tx_buf); - if (ssc_rx_buf != NULL) - kfree (ssc_rx_buf); - - if (ret < 0) { - printk ("ssc session fails\n"); - } - return ret; -} - -int -ifx_ssc_txrx (char *tx_buf, u32 tx_len, char *rx_buf, u32 rx_len) -{ - return ssc_session(tx_buf, tx_len, rx_buf, rx_len); -} -EXPORT_SYMBOL(ifx_ssc_txrx); - -int -ifx_ssc_tx (char *tx_buf, u32 tx_len) -{ - return ssc_session(tx_buf, tx_len, NULL, 0); -} -EXPORT_SYMBOL(ifx_ssc_tx); - -int -ifx_ssc_rx (char *rx_buf, u32 rx_len) -{ - return ssc_session(NULL, 0, rx_buf, rx_len); -} -EXPORT_SYMBOL(ifx_ssc_rx); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); -MODULE_DESCRIPTION("danube ssc driver"); - diff --git a/target/linux/danube/files/drivers/char/watchdog/danube_wdt.c b/target/linux/danube/files/drivers/char/watchdog/danube_wdt.c deleted file mode 100644 index be2b339381..0000000000 --- a/target/linux/danube/files/drivers/char/watchdog/danube_wdt.c +++ /dev/null @@ -1,287 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2006 infineon - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ - -#include <asm/uaccess.h> -#include <linux/errno.h> -#include <linux/proc_fs.h> -#include <linux/ioctl.h> -#include <linux/module.h> -#include <asm-mips/danube/danube_wdt.h> -#include <asm-mips/danube/danube.h> - - -// TODO remove magic numbers and weirdo macros - -extern unsigned int danube_get_fpi_hz (void); - -static int danube_wdt_inuse = 0; -static int danube_wdt_major = 0; - -int -danube_wdt_enable (unsigned int timeout) -{ - unsigned int wdt_cr = 0; - unsigned int wdt_reload = 0; - unsigned int wdt_clkdiv, wdt_pwl, ffpi; - int retval = 0; - - /* clock divider & prewarning limit */ - wdt_clkdiv = 1 << (7 * DANUBE_BIU_WDT_CR_CLKDIV_GET(readl(DANUBE_BIU_WDT_CR))); - wdt_pwl = 0x8000 >> DANUBE_BIU_WDT_CR_PWL_GET(readl(DANUBE_BIU_WDT_CR)); - - //TODO - printk("WARNING FUNCTION CALL MISSING!!!"); - //ffpi = cgu_get_io_region_clock(); - printk("cpu clock = %d\n", ffpi); - - /* caculate reload value */ - wdt_reload = (timeout * (ffpi / wdt_clkdiv)) + wdt_pwl; - - printk("wdt_pwl=0x%x, wdt_clkdiv=%d, ffpi=%d, wdt_reload = 0x%x\n", - wdt_pwl, wdt_clkdiv, ffpi, wdt_reload); - - if (wdt_reload > 0xFFFF) - { - printk ("timeout too large %d\n", timeout); - retval = -EINVAL; - goto out; - } - - /* Write first part of password access */ - writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW1), DANUBE_BIU_WDT_CR); - - wdt_cr = readl(DANUBE_BIU_WDT_CR); - wdt_cr &= (!DANUBE_BIU_WDT_CR_PW_SET(0xff) & - !DANUBE_BIU_WDT_CR_PWL_SET(0x3) & - !DANUBE_BIU_WDT_CR_CLKDIV_SET(0x3) & - !DANUBE_BIU_WDT_CR_RELOAD_SET(0xffff)); - - wdt_cr |= (DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2) | - DANUBE_BIU_WDT_CR_PWL_SET(DANUBE_BIU_WDT_CR_PWL_GET(readl(DANUBE_BIU_WDT_CR))) | - DANUBE_BIU_WDT_CR_CLKDIV_SET(DANUBE_BIU_WDT_CR_CLKDIV_GET(readl(DANUBE_BIU_WDT_CR))) | - DANUBE_BIU_WDT_CR_RELOAD_SET(wdt_reload) | - DANUBE_BIU_WDT_CR_GEN); - - writel(wdt_cr, DANUBE_BIU_WDT_CR); - - printk("watchdog enabled\n"); - -out: - return retval; -} - -void -danube_wdt_disable (void) -{ - writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW1), DANUBE_BIU_WDT_CR); - writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2), DANUBE_BIU_WDT_CR); - - printk("watchdog disabled\n"); -} - -/* passed LPEN or DSEN */ -void -danube_wdt_enable_feature (int en, int type) -{ - unsigned int wdt_cr = 0; - - writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW1), DANUBE_BIU_WDT_CR); - - wdt_cr = readl(DANUBE_BIU_WDT_CR); - - if (en) - { - wdt_cr &= (~DANUBE_BIU_WDT_CR_PW_SET(0xff)); - wdt_cr |= (DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2) | type); - } else { - wdt_cr &= (~DANUBE_BIU_WDT_CR_PW_SET(0xff) & ~type); - wdt_cr |= DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2); - } - - writel(wdt_cr, DANUBE_BIU_WDT_CR); -} - -void -danube_wdt_prewarning_limit (int pwl) -{ - unsigned int wdt_cr = 0; - - wdt_cr = readl(DANUBE_BIU_WDT_CR); - writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW1), DANUBE_BIU_WDT_CR); - - wdt_cr &= 0xf300ffff; - wdt_cr |= (DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2) | DANUBE_BIU_WDT_CR_PWL_SET(pwl)); - - /* Set reload value in second password access */ - writel(wdt_cr, DANUBE_BIU_WDT_CR); -} - -void -danube_wdt_set_clkdiv (int clkdiv) -{ - unsigned int wdt_cr = 0; - - wdt_cr = readl(DANUBE_BIU_WDT_CR); - writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW1), DANUBE_BIU_WDT_CR); - - wdt_cr &= 0xfc00ffff; - wdt_cr |= (DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2) | DANUBE_BIU_WDT_CR_CLKDIV_SET(clkdiv)); - - /* Set reload value in second password access */ - writel(wdt_cr, DANUBE_BIU_WDT_CR); -} - -static int -danube_wdt_ioctl (struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) -{ - int result = 0; - static int timeout = -1; - unsigned int user_arg; - - if ((cmd != DANUBE_WDT_IOC_STOP) && (cmd != DANUBE_WDT_IOC_PING) && (cmd != DANUBE_WDT_IOC_GET_STATUS)) - { - if (copy_from_user((void *) &user_arg, (void *) arg, sizeof (int))){ - result = -EINVAL; - goto out; - } - } - - switch (cmd) - { - case DANUBE_WDT_IOC_START: - if ((result = danube_wdt_enable(user_arg)) < 0) - timeout = -1; - else - timeout = user_arg; - break; - - case DANUBE_WDT_IOC_STOP: - printk("disable watch dog timer\n"); - danube_wdt_disable(); - break; - - case DANUBE_WDT_IOC_PING: - if (timeout < 0) - result = -EIO; - else - result = danube_wdt_enable(timeout); - break; - - case DANUBE_WDT_IOC_GET_STATUS: - user_arg = readl(DANUBE_BIU_WDT_SR); - copy_to_user((int*)arg, (int*)&user_arg, sizeof(int)); - break; - - case DANUBE_WDT_IOC_SET_PWL: - danube_wdt_prewarning_limit(user_arg); - break; - - case DANUBE_WDT_IOC_SET_DSEN: - danube_wdt_enable_feature(user_arg, DANUBE_BIU_WDT_CR_DSEN); - break; - - case DANUBE_WDT_IOC_SET_LPEN: - danube_wdt_enable_feature(user_arg, DANUBE_BIU_WDT_CR_LPEN); - break; - - case DANUBE_WDT_IOC_SET_CLKDIV: - danube_wdt_set_clkdiv(user_arg); - break; - - default: - printk("unknown watchdog iotcl\n"); - } - -out: - return result; -} - -static int -danube_wdt_open (struct inode *inode, struct file *file) -{ - if (danube_wdt_inuse) - return -EBUSY; - - danube_wdt_inuse = 1; - - return 0; -} - -static int -danube_wdt_release (struct inode *inode, struct file *file) -{ - danube_wdt_inuse = 0; - - return 0; -} - -int -danube_wdt_register_proc_read (char *buf, char **start, off_t offset, int count, - int *eof, void *data) -{ - int len = 0; - - len += sprintf (buf + len, "DANUBE_BIU_WDT_PROC_READ\n"); - len += sprintf (buf + len, "DANUBE_BIU_WDT_CR(0x%08x) : 0x%08x\n", - (unsigned int)DANUBE_BIU_WDT_CR, readl(DANUBE_BIU_WDT_CR)); - len += sprintf (buf + len, "DANUBE_BIU_WDT_SR(0x%08x) : 0x%08x\n", - (unsigned int)DANUBE_BIU_WDT_SR, readl(DANUBE_BIU_WDT_SR)); - - *eof = 1; - - return len; -} - -static struct file_operations wdt_fops = { - .owner = THIS_MODULE, - .ioctl = danube_wdt_ioctl, - .open = danube_wdt_open, - .release = danube_wdt_release, -}; - -int __init -danube_wdt_init_module (void) -{ - danube_wdt_major = register_chrdev(0, "wdt", &wdt_fops); - - if (danube_wdt_major < 0) - { - printk("cannot register watchdog device\n"); - - return -EINVAL; - } - - create_proc_read_entry("danube_wdt", 0, NULL, danube_wdt_register_proc_read, NULL); - - printk("danube watchdog loaded\n"); - - return 0; -} - -void -danube_wdt_cleanup_module (void) -{ - unregister_chrdev(danube_wdt_major, "wdt"); - remove_proc_entry("danube_wdt", NULL); -} - -module_init(danube_wdt_init_module); -module_exit(danube_wdt_cleanup_module); diff --git a/target/linux/danube/files/drivers/mtd/maps/danube.c b/target/linux/danube/files/drivers/mtd/maps/danube.c deleted file mode 100644 index 25e9df3de8..0000000000 --- a/target/linux/danube/files/drivers/mtd/maps/danube.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * Driver for DANUBE flashmap - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Copyright (C) 2004 Liu Peng Infineon IFAP DC COM CPE - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <asm/io.h> - -#include <linux/init.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/cfi.h> -#include <asm/danube/danube.h> -#include <linux/magic.h> - -static struct map_info -danube_map = { - .name = "DANUBE_FLASH", - .bankwidth = 2, - .size = 0x400000, -}; - -static map_word -danube_read16 (struct map_info * map, unsigned long adr) -{ - map_word temp; - - adr ^= 2; - temp.x[0] = *((__u16 *) (map->virt + adr)); - - return temp; -} - -static void -danube_write16 (struct map_info *map, map_word d, unsigned long adr) -{ - adr ^= 2; - *((__u16 *) (map->virt + adr)) = d.x[0]; -} - -void -danube_copy_from (struct map_info *map, void *to, unsigned long from, ssize_t len) -{ - u8 *p; - u8 *to_8; - - from = (unsigned long) (from + map->virt); - p = (u8 *) from; - to_8 = (u8 *) to; - while(len--){ - *to_8++ = *p++; - } -} - -void -danube_copy_to (struct map_info *map, unsigned long to, const void *from, ssize_t len) -{ - u8 *p = (u8*) from; - u8 *to_8; - - to += (unsigned long) map->virt; - to_8 = (u8*)to; - while(len--){ - *p++ = *to_8++; - } -} - -static struct mtd_partition -danube_partitions[4] = { - { - name:"U-Boot", - offset:0x00000000, - size:0x00020000, - }, - { - name:"U-Boot-Env", - offset:0x00020000, - size:0x00010000, - }, - { - name:"kernel", - offset:0x00030000, - size:0x0, - }, - { - name:"rootfs", - offset:0x0, - size:0x0, - }, -}; - -#define DANUBE_FLASH_START 0x10000000 -#define DANUBE_FLASH_MAX 0x2000000 - -int -find_uImage_size (unsigned long start_offset){ - unsigned long temp; - - danube_copy_from(&danube_map, &temp, start_offset + 12, 4); - printk("kernel size is %ld \n", temp + 0x40); - return temp + 0x40; -} - -int -detect_squashfs_partition (unsigned long start_offset){ - unsigned long temp; - - danube_copy_from(&danube_map, &temp, start_offset, 4); - - return (temp == SQUASHFS_MAGIC); -} - -int __init -init_danube_mtd (void) -{ - struct mtd_info *danube_mtd = NULL; - struct mtd_partition *parts = NULL; - unsigned long uimage_size; - - writel(0x1d7ff, DANUBE_EBU_BUSCON0); - - danube_map.read = danube_read16; - danube_map.write = danube_write16; - danube_map.copy_from = danube_copy_from; - danube_map.copy_to = danube_copy_to; - - danube_map.phys = DANUBE_FLASH_START; - danube_map.virt = ioremap_nocache(DANUBE_FLASH_START, DANUBE_FLASH_MAX); - danube_map.size = DANUBE_FLASH_MAX; - if (!danube_map.virt) { - printk(KERN_WARNING "Failed to ioremap!\n"); - return -EIO; - } - - danube_mtd = (struct mtd_info *) do_map_probe("cfi_probe", &danube_map); - if (!danube_mtd) { - iounmap(danube_map.virt); - printk("probing failed\n"); - return -ENXIO; - } - - danube_mtd->owner = THIS_MODULE; - - uimage_size = find_uImage_size(danube_partitions[2].offset); - - if(detect_squashfs_partition(danube_partitions[2].offset + uimage_size)){ - printk("Found a squashfs following the uImage\n"); - } else { - uimage_size &= ~0xffff; - uimage_size += 0x10000; - } - - danube_partitions[2].size = uimage_size; - danube_partitions[3].offset = danube_partitions[2].offset + danube_partitions[2].size; - danube_partitions[3].size = ((danube_mtd->size >> 20) * 1024 * 1024) - danube_partitions[3].offset; - - parts = &danube_partitions[0]; - add_mtd_partitions(danube_mtd, parts, 4); - - printk("Added danube flash with %dMB\n", danube_mtd->size >> 20); - return 0; -} - -static void -__exit -cleanup_danube_mtd (void) -{ -} - -module_init (init_danube_mtd); -module_exit (cleanup_danube_mtd); - -MODULE_LICENSE ("GPL"); -MODULE_AUTHOR ("John Crispin <blogic@openwrt.org>"); -MODULE_DESCRIPTION ("MTD map driver for DANUBE boards"); diff --git a/target/linux/danube/files/drivers/net/danube_mii0.c b/target/linux/danube/files/drivers/net/danube_mii0.c deleted file mode 100644 index 354ccc36d1..0000000000 --- a/target/linux/danube/files/drivers/net/danube_mii0.c +++ /dev/null @@ -1,433 +0,0 @@ -/* - * drivers/net/danube_mii0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2005 Infineon - * - * Rewrite of Infineon Danube code, thanks to infineon for the support, - * software and hardware - * - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ - -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <asm/uaccess.h> -#include <linux/in.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/ip.h> -#include <linux/tcp.h> -#include <linux/skbuff.h> -#include <linux/mm.h> -#include <linux/ethtool.h> -#include <asm/checksum.h> -#include <linux/init.h> -#include <asm/delay.h> -#include <asm/danube/danube.h> -#include <asm/danube/danube_mii0.h> -#include <asm/danube/danube_dma.h> -#include <asm/danube/danube_pmu.h> - -static struct net_device danube_mii0_dev; -static unsigned char u_boot_ethaddr[MAX_ADDR_LEN]; - -void -danube_write_mdio (u32 phy_addr, u32 phy_reg, u16 phy_data) -{ - u32 val = MDIO_ACC_REQUEST | - ((phy_addr & MDIO_ACC_ADDR_MASK) << MDIO_ACC_ADDR_OFFSET) | - ((phy_reg & MDIO_ACC_REG_MASK) << MDIO_ACC_REG_OFFSET) | - phy_data; - - while (readl(DANUBE_PPE32_MDIO_ACC) & MDIO_ACC_REQUEST); - writel(val, DANUBE_PPE32_MDIO_ACC); -} - -unsigned short -danube_read_mdio (u32 phy_addr, u32 phy_reg) -{ - u32 val = MDIO_ACC_REQUEST | MDIO_ACC_READ | - ((phy_addr & MDIO_ACC_ADDR_MASK) << MDIO_ACC_ADDR_OFFSET) | - ((phy_reg & MDIO_ACC_REG_MASK) << MDIO_ACC_REG_OFFSET); - - writel(val, DANUBE_PPE32_MDIO_ACC); - while (readl(DANUBE_PPE32_MDIO_ACC) & MDIO_ACC_REQUEST){}; - val = readl(DANUBE_PPE32_MDIO_ACC) & MDIO_ACC_VAL_MASK; - - return val; -} - -int -danube_switch_open (struct net_device *dev) -{ - struct switch_priv* priv = (struct switch_priv*)dev->priv; - struct dma_device_info* dma_dev = priv->dma_device; - int i; - - for (i = 0; i < dma_dev->max_rx_chan_num; i++) - { - if ((dma_dev->rx_chan[i])->control == DANUBE_DMA_CH_ON) - (dma_dev->rx_chan[i])->open(dma_dev->rx_chan[i]); - } - - netif_start_queue(dev); - - return 0; -} - -int -switch_release (struct net_device *dev){ - struct switch_priv* priv = (struct switch_priv*)dev->priv; - struct dma_device_info* dma_dev = priv->dma_device; - int i; - - for (i = 0; i < dma_dev->max_rx_chan_num; i++) - dma_dev->rx_chan[i]->close(dma_dev->rx_chan[i]); - - netif_stop_queue(dev); - - return 0; -} - -int -switch_hw_receive (struct net_device* dev,struct dma_device_info* dma_dev) -{ - struct switch_priv *priv = (struct switch_priv*)dev->priv; - unsigned char* buf = NULL; - struct sk_buff *skb = NULL; - int len = 0; - - len = dma_device_read(dma_dev, &buf, (void**)&skb); - - if (len >= ETHERNET_PACKET_DMA_BUFFER_SIZE) - { - printk("packet too large %d\n",len); - goto switch_hw_receive_err_exit; - } - - /* remove CRC */ - len -= 4; - if (skb == NULL ) - { - printk("cannot restore pointer\n"); - goto switch_hw_receive_err_exit; - } - - if (len > (skb->end - skb->tail)) - { - printk("BUG, len:%d end:%p tail:%p\n", (len+4), skb->end, skb->tail); - goto switch_hw_receive_err_exit; - } - - skb_put(skb, len); - skb->dev = dev; - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - - priv->stats.rx_packets++; - priv->stats.rx_bytes += len; - - return 0; - -switch_hw_receive_err_exit: - if (len == 0) - { - if(skb) - dev_kfree_skb_any(skb); - priv->stats.rx_errors++; - priv->stats.rx_dropped++; - - return -EIO; - } else { - return len; - } -} - -int -switch_hw_tx (char *buf, int len, struct net_device *dev) -{ - int ret = 0; - struct switch_priv *priv = dev->priv; - struct dma_device_info* dma_dev = priv->dma_device; - - ret = dma_device_write(dma_dev, buf, len, priv->skb); - - return ret; -} - -int -switch_tx (struct sk_buff *skb, struct net_device *dev) -{ - int len; - char *data; - struct switch_priv *priv = dev->priv; - struct dma_device_info* dma_dev = priv->dma_device; - - len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; - data = skb->data; - priv->skb = skb; - dev->trans_start = jiffies; - // TODO we got more than 1 dma channel, so we should do something intelligent - // here to select one - dma_dev->current_tx_chan = 0; - - wmb(); - - if (switch_hw_tx(data, len, dev) != len) - { - dev_kfree_skb_any(skb); - priv->stats.tx_errors++; - priv->stats.tx_dropped++; - } else { - priv->stats.tx_packets++; - priv->stats.tx_bytes+=len; - } - - return 0; -} - -void -switch_tx_timeout (struct net_device *dev) -{ - int i; - struct switch_priv* priv = (struct switch_priv*)dev->priv; - - priv->stats.tx_errors++; - - for (i = 0; i < priv->dma_device->max_tx_chan_num; i++) - { - priv->dma_device->tx_chan[i]->disable_irq(priv->dma_device->tx_chan[i]); - } - - netif_wake_queue(dev); - - return; -} - -int -dma_intr_handler (struct dma_device_info* dma_dev, int status) -{ - int i; - - switch (status) - { - case RCV_INT: - switch_hw_receive(&danube_mii0_dev, dma_dev); - break; - - case TX_BUF_FULL_INT: - printk("tx buffer full\n"); - netif_stop_queue(&danube_mii0_dev); - for (i = 0; i < dma_dev->max_tx_chan_num; i++) - { - if ((dma_dev->tx_chan[i])->control==DANUBE_DMA_CH_ON) - dma_dev->tx_chan[i]->enable_irq(dma_dev->tx_chan[i]); - } - break; - - case TRANSMIT_CPT_INT: - for (i = 0; i < dma_dev->max_tx_chan_num; i++) - dma_dev->tx_chan[i]->disable_irq(dma_dev->tx_chan[i]); - - netif_wake_queue(&danube_mii0_dev); - break; - } - - return 0; -} - -unsigned char* -danube_etop_dma_buffer_alloc (int len, int *byte_offset, void **opt) -{ - unsigned char *buffer = NULL; - struct sk_buff *skb = NULL; - - skb = dev_alloc_skb(ETHERNET_PACKET_DMA_BUFFER_SIZE); - if (skb == NULL) - return NULL; - - buffer = (unsigned char*)(skb->data); - skb_reserve(skb, 2); - *(int*)opt = (int)skb; - *byte_offset = 2; - - return buffer; -} - -void -danube_etop_dma_buffer_free (unsigned char *dataptr, void *opt) -{ - struct sk_buff *skb = NULL; - - if(opt == NULL) - { - kfree(dataptr); - } else { - skb = (struct sk_buff*)opt; - dev_kfree_skb_any(skb); - } -} - -static struct net_device_stats* -danube_get_stats (struct net_device *dev) -{ - return (struct net_device_stats *)dev->priv; -} - -static int -switch_init (struct net_device *dev) -{ - u64 retval = 0; - int i; - struct switch_priv *priv; - - ether_setup(dev); - - printk("%s up\n", dev->name); - - dev->open = danube_switch_open; - dev->stop = switch_release; - dev->hard_start_xmit = switch_tx; - dev->get_stats = danube_get_stats; - dev->tx_timeout = switch_tx_timeout; - dev->watchdog_timeo = 10 * HZ; - dev->priv = kmalloc(sizeof(struct switch_priv), GFP_KERNEL); - - if (dev->priv == NULL) - return -ENOMEM; - - memset(dev->priv, 0, sizeof(struct switch_priv)); - priv = dev->priv; - - priv->dma_device = dma_device_reserve("PPE"); - - if (!priv->dma_device){ - BUG(); - return -ENODEV; - } - - priv->dma_device->buffer_alloc = &danube_etop_dma_buffer_alloc; - priv->dma_device->buffer_free = &danube_etop_dma_buffer_free; - priv->dma_device->intr_handler = &dma_intr_handler; - priv->dma_device->max_rx_chan_num = 4; - - for (i = 0; i < priv->dma_device->max_rx_chan_num; i++) - { - priv->dma_device->rx_chan[i]->packet_size = ETHERNET_PACKET_DMA_BUFFER_SIZE; - priv->dma_device->rx_chan[i]->control = DANUBE_DMA_CH_ON; - } - - for (i = 0; i < priv->dma_device->max_tx_chan_num; i++) - { - if(i == 0) - priv->dma_device->tx_chan[i]->control = DANUBE_DMA_CH_ON; - else - priv->dma_device->tx_chan[i]->control = DANUBE_DMA_CH_OFF; - } - - dma_device_register(priv->dma_device); - - /*read the mac address from the mac table and put them into the mac table.*/ - for (i = 0; i < 6; i++) - { - retval += u_boot_ethaddr[i]; - } - - //TODO - /* ethaddr not set in u-boot ? */ - if (retval == 0) - { - printk("use default MAC address\n"); - dev->dev_addr[0] = 0x00; - dev->dev_addr[1] = 0x11; - dev->dev_addr[2] = 0x22; - dev->dev_addr[3] = 0x33; - dev->dev_addr[4] = 0x44; - dev->dev_addr[5] = 0x55; - } else { - for (i = 0; i < 6; i++) - dev->dev_addr[i] = u_boot_ethaddr[i]; - } - - return 0; -} - -static void -danube_sw_chip_init (int mode) -{ - danube_pmu_enable(DANUBE_PMU_PWDCR_DMA); - danube_pmu_enable(DANUBE_PMU_PWDCR_PPE); - - if(mode == REV_MII_MODE) - writel((readl(DANUBE_PPE32_CFG) & PPE32_MII_MASK) | PPE32_MII_REVERSE, DANUBE_PPE32_CFG); - else if(mode == MII_MODE) - writel((readl(DANUBE_PPE32_CFG) & PPE32_MII_MASK) | PPE32_MII_NORMAL, DANUBE_PPE32_CFG); - - writel(PPE32_PLEN_UNDER | PPE32_PLEN_OVER, DANUBE_PPE32_IG_PLEN_CTRL); - - writel(PPE32_CGEN, DANUBE_PPE32_ENET_MAC_CFG); - - wmb(); -} - -int __init -switch_init_module(void) -{ - int result = 0; - - danube_mii0_dev.init = switch_init; - - strcpy(danube_mii0_dev.name, "eth%d"); - SET_MODULE_OWNER(dev); - - result = register_netdev(&danube_mii0_dev); - if (result) - { - printk("error %i registering device \"%s\"\n", result, danube_mii0_dev.name); - goto out; - } - - /* danube eval kit connects the phy/switch in REV mode */ - danube_sw_chip_init(REV_MII_MODE); - printk("danube MAC driver loaded!\n"); - -out: - return result; -} - -static void __exit -switch_cleanup(void) -{ - struct switch_priv *priv = (struct switch_priv*)danube_mii0_dev.priv; - - printk("danube_mii0 cleanup\n"); - - dma_device_unregister(priv->dma_device); - dma_device_release(priv->dma_device); - kfree(priv->dma_device); - kfree(danube_mii0_dev.priv); - unregister_netdev(&danube_mii0_dev); - - return; -} - -module_init(switch_init_module); -module_exit(switch_cleanup); diff --git a/target/linux/danube/files/drivers/serial/danube_asc.c b/target/linux/danube/files/drivers/serial/danube_asc.c deleted file mode 100644 index b50b1e7bee..0000000000 --- a/target/linux/danube/files/drivers/serial/danube_asc.c +++ /dev/null @@ -1,608 +0,0 @@ -/* - * Driver for DANUBEASC serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Copyright (C) 2004 Infineon IFAP DC COM CPE - * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - */ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/circ_buf.h> -#include <linux/serial.h> -#include <linux/serial_core.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/irq.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/bitops.h> -#include <asm/danube/danube.h> -#include <asm/danube/danube_irq.h> -#include <asm/danube/danube_serial.h> - -#define PORT_DANUBEASC 111 - -#include <linux/serial_core.h> - -#define UART_DUMMY_UER_RX 1 - -static void danubeasc_tx_chars(struct uart_port *port); -extern void prom_printf(const char * fmt, ...); -static struct uart_port danubeasc_port; -static struct uart_driver danubeasc_reg; -static unsigned int uartclk = 0; -extern unsigned int danube_get_fpi_hz(void); - -static void -danubeasc_stop_tx (struct uart_port *port) -{ - /* fifo underrun shuts up after firing once */ - return; -} - -static void -danubeasc_start_tx (struct uart_port *port) -{ - unsigned long flags; - - local_irq_save(flags); - danubeasc_tx_chars(port); - local_irq_restore(flags); - - return; -} - -static void -danubeasc_stop_rx (struct uart_port *port) -{ - /* clear the RX enable bit */ - writel(ASCWHBSTATE_CLRREN, DANUBE_ASC1_WHBSTATE); -} - -static void -danubeasc_enable_ms (struct uart_port *port) -{ - /* no modem signals */ - return; -} - -static void -danubeasc_rx_chars (struct uart_port *port) -{ - struct tty_struct *tty = port->info->tty; - unsigned int ch = 0, rsr = 0, fifocnt; - - fifocnt = readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_RXFFLMASK; - while (fifocnt--) - { - u8 flag = TTY_NORMAL; - ch = readl(DANUBE_ASC1_RBUF); - rsr = (readl(DANUBE_ASC1_STATE) & ASCSTATE_ANY) | UART_DUMMY_UER_RX; - tty_flip_buffer_push(tty); - port->icount.rx++; - - /* - * Note that the error handling code is - * out of the main execution path - */ - if (rsr & ASCSTATE_ANY) { - if (rsr & ASCSTATE_PE) { - port->icount.parity++; - writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRPE, DANUBE_ASC1_WHBSTATE); - } else if (rsr & ASCSTATE_FE) { - port->icount.frame++; - writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRFE, DANUBE_ASC1_WHBSTATE); - } - if (rsr & ASCSTATE_ROE) { - port->icount.overrun++; - writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRROE, DANUBE_ASC1_WHBSTATE); - } - - rsr &= port->read_status_mask; - - if (rsr & ASCSTATE_PE) - flag = TTY_PARITY; - else if (rsr & ASCSTATE_FE) - flag = TTY_FRAME; - } - - if ((rsr & port->ignore_status_mask) == 0) - tty_insert_flip_char(tty, ch, flag); - - if (rsr & ASCSTATE_ROE) - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - if (ch != 0) - tty_flip_buffer_push(tty); - - return; -} - - -static void -danubeasc_tx_chars (struct uart_port *port) -{ - struct circ_buf *xmit = &port->info->xmit; - - if (uart_tx_stopped(port)) { - danubeasc_stop_tx(port); - return; - } - - while(((readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK) - >> ASCFSTAT_TXFFLOFF) != DANUBEASC_TXFIFO_FULL) - { - if (port->x_char) { - writel(port->x_char, DANUBE_ASC1_TBUF); - port->icount.tx++; - port->x_char = 0; - continue; - } - - if (uart_circ_empty(xmit)) - break; - - writel(port->info->xmit.buf[port->info->xmit.tail], DANUBE_ASC1_TBUF); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); -} - -static irqreturn_t -danubeasc_tx_int (int irq, void *port) -{ - writel(ASC_IRNCR_TIR, DANUBE_ASC1_IRNCR); - danubeasc_start_tx(port); - mask_and_ack_danube_irq(irq); - - return IRQ_HANDLED; -} - -static irqreturn_t -danubeasc_er_int (int irq, void *port) -{ - /* clear any pending interrupts */ - writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRPE | - ASCWHBSTATE_CLRFE | ASCWHBSTATE_CLRROE, DANUBE_ASC1_WHBSTATE); - - return IRQ_HANDLED; -} - -static irqreturn_t -danubeasc_rx_int (int irq, void *port) -{ - writel(ASC_IRNCR_RIR, DANUBE_ASC1_IRNCR); - danubeasc_rx_chars((struct uart_port *) port); - mask_and_ack_danube_irq(irq); - - return IRQ_HANDLED; -} - -static unsigned int -danubeasc_tx_empty (struct uart_port *port) -{ - int status; - - status = readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK; - - return status ? 0 : TIOCSER_TEMT; -} - -static unsigned int -danubeasc_get_mctrl (struct uart_port *port) -{ - return TIOCM_CTS | TIOCM_CAR | TIOCM_DSR; -} - -static void -danubeasc_set_mctrl (struct uart_port *port, u_int mctrl) -{ - return; -} - -static void -danubeasc_break_ctl (struct uart_port *port, int break_state) -{ - return; -} - -static void -danubeasc1_hw_init (void) -{ - /* this setup was probably already done in ROM/u-boot but we do it again*/ - /* TODO: GPIO pins are multifunction */ - writel(readl(DANUBE_ASC1_CLC) & ~DANUBE_ASC1_CLC_DISS, DANUBE_ASC1_CLC); - writel((readl(DANUBE_ASC1_CLC) & ~ASCCLC_RMCMASK) | (1 << ASCCLC_RMCOFFSET), DANUBE_ASC1_CLC); - writel(0, DANUBE_ASC1_PISEL); - writel(((DANUBEASC_TXFIFO_FL << ASCTXFCON_TXFITLOFF) & - ASCTXFCON_TXFITLMASK) | ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU, DANUBE_ASC1_TXFCON); - writel(((DANUBEASC_RXFIFO_FL << ASCRXFCON_RXFITLOFF) & - ASCRXFCON_RXFITLMASK) | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU, DANUBE_ASC1_RXFCON); - wmb (); - - /*framing, overrun, enable */ - writel(readl(DANUBE_ASC1_CON) | ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN, - DANUBE_ASC1_CON); -} - -static int -danubeasc_startup (struct uart_port *port) -{ - unsigned long flags; - int retval; - - /* this assumes: CON.BRS = CON.FDE = 0 */ - if (uartclk == 0) - uartclk = danube_get_fpi_hz(); - - danubeasc_port.uartclk = uartclk; - - danubeasc1_hw_init(); - - local_irq_save(flags); - - retval = request_irq(DANUBEASC1_RIR, danubeasc_rx_int, IRQF_DISABLED, "asc_rx", port); - if (retval){ - printk("failed to request danubeasc_rx_int\n"); - return retval; - } - - retval = request_irq(DANUBEASC1_TIR, danubeasc_tx_int, IRQF_DISABLED, "asc_tx", port); - if (retval){ - printk("failed to request danubeasc_tx_int\n"); - goto err1; - } - - retval = request_irq(DANUBEASC1_EIR, danubeasc_er_int, IRQF_DISABLED, "asc_er", port); - if (retval){ - printk("failed to request danubeasc_er_int\n"); - goto err2; - } - - writel(ASC_IRNREN_RX_BUF | ASC_IRNREN_TX_BUF | ASC_IRNREN_ERR | ASC_IRNREN_TX, - DANUBE_ASC1_IRNREN); - - local_irq_restore(flags); - - return 0; - -err2: - free_irq(DANUBEASC1_TIR, port); - -err1: - free_irq(DANUBEASC1_RIR, port); - local_irq_restore(flags); - - return retval; -} - -static void -danubeasc_shutdown (struct uart_port *port) -{ - free_irq(DANUBEASC1_RIR, port); - free_irq(DANUBEASC1_TIR, port); - free_irq(DANUBEASC1_EIR, port); - /* - * disable the baudrate generator to disable the ASC - */ - writel(0, DANUBE_ASC1_CON); - - /* flush and then disable the fifos */ - writel(readl(DANUBE_ASC1_RXFCON) | ASCRXFCON_RXFFLU, DANUBE_ASC1_RXFCON); - writel(readl(DANUBE_ASC1_RXFCON) & ~ASCRXFCON_RXFEN, DANUBE_ASC1_RXFCON); - writel(readl(DANUBE_ASC1_TXFCON) | ASCTXFCON_TXFFLU, DANUBE_ASC1_TXFCON); - writel(readl(DANUBE_ASC1_TXFCON) & ~ASCTXFCON_TXFEN, DANUBE_ASC1_TXFCON); -} - -static void danubeasc_set_termios(struct uart_port *port, struct ktermios *new, struct ktermios *old) -{ - unsigned int cflag; - unsigned int iflag; - unsigned int quot; - unsigned int baud; - unsigned int con = 0; - unsigned long flags; - - cflag = new->c_cflag; - iflag = new->c_iflag; - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS7: - con = ASCCON_M_7ASYNC; - break; - - case CS5: - case CS6: - default: - con = ASCCON_M_8ASYNC; - break; - } - - if (cflag & CSTOPB) - con |= ASCCON_STP; - - if (cflag & PARENB) { - if (!(cflag & PARODD)) - con &= ~ASCCON_ODD; - else - con |= ASCCON_ODD; - } - - port->read_status_mask = ASCSTATE_ROE; - if (iflag & INPCK) - port->read_status_mask |= ASCSTATE_FE | ASCSTATE_PE; - - port->ignore_status_mask = 0; - if (iflag & IGNPAR) - port->ignore_status_mask |= ASCSTATE_FE | ASCSTATE_PE; - - if (iflag & IGNBRK) { - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (iflag & IGNPAR) - port->ignore_status_mask |= ASCSTATE_ROE; - } - - if ((cflag & CREAD) == 0) - port->ignore_status_mask |= UART_DUMMY_UER_RX; - - /* set error signals - framing, parity and overrun, enable receiver */ - con |= ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN; - - local_irq_save(flags); - - /* set up CON */ - writel(readl(DANUBE_ASC1_CON) | con, DANUBE_ASC1_CON); - - /* Set baud rate - take a divider of 2 into account */ - baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); - quot = uart_get_divisor(port, baud); - quot = quot / 2 - 1; - - /* disable the baudrate generator */ - writel(readl(DANUBE_ASC1_CON) & ~ASCCON_R, DANUBE_ASC1_CON); - - /* make sure the fractional divider is off */ - writel(readl(DANUBE_ASC1_CON) & ~ASCCON_FDE, DANUBE_ASC1_CON); - - /* set up to use divisor of 2 */ - writel(readl(DANUBE_ASC1_CON) & ~ASCCON_BRS, DANUBE_ASC1_CON); - - /* now we can write the new baudrate into the register */ - writel(quot, DANUBE_ASC1_BG); - - /* turn the baudrate generator back on */ - writel(readl(DANUBE_ASC1_CON) | ASCCON_R, DANUBE_ASC1_CON); - - /* enable rx */ - writel(ASCWHBSTATE_SETREN, DANUBE_ASC1_WHBSTATE); - - local_irq_restore(flags); -} - -static const char* -danubeasc_type (struct uart_port *port) -{ - return port->type == PORT_DANUBEASC ? "DANUBEASC" : NULL; -} - -static void -danubeasc_release_port (struct uart_port *port) -{ - return; -} - -static int -danubeasc_request_port (struct uart_port *port) -{ - return 0; -} - -static void -danubeasc_config_port (struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_DANUBEASC; - danubeasc_request_port(port); - } -} - -static int -danubeasc_verify_port (struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - if (ser->type != PORT_UNKNOWN && ser->type != PORT_DANUBEASC) - ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= NR_IRQS) - ret = -EINVAL; - if (ser->baud_base < 9600) - ret = -EINVAL; - return ret; -} - -static struct uart_ops danubeasc_pops = { - .tx_empty = danubeasc_tx_empty, - .set_mctrl = danubeasc_set_mctrl, - .get_mctrl = danubeasc_get_mctrl, - .stop_tx = danubeasc_stop_tx, - .start_tx = danubeasc_start_tx, - .stop_rx = danubeasc_stop_rx, - .enable_ms = danubeasc_enable_ms, - .break_ctl = danubeasc_break_ctl, - .startup = danubeasc_startup, - .shutdown = danubeasc_shutdown, - .set_termios = danubeasc_set_termios, - .type = danubeasc_type, - .release_port = danubeasc_release_port, - .request_port = danubeasc_request_port, - .config_port = danubeasc_config_port, - .verify_port = danubeasc_verify_port, -}; - -static struct uart_port danubeasc_port = { - membase: (void *)DANUBE_ASC1_BASE_ADDR, - mapbase: DANUBE_ASC1_BASE_ADDR, - iotype: SERIAL_IO_MEM, - irq: DANUBEASC1_RIR, - uartclk: 0, - fifosize: 16, - unused: {DANUBEASC1_TIR, DANUBEASC1_EIR}, - type: PORT_DANUBEASC, - ops: &danubeasc_pops, - flags: ASYNC_BOOT_AUTOCONF, -}; - -static void -danubeasc_console_write (struct console *co, const char *s, u_int count) -{ - int i, fifocnt; - unsigned long flags; - - local_irq_save(flags); - for (i = 0; i < count; i++) - { - /* wait until the FIFO is not full */ - do - { - fifocnt = (readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK) - >> ASCFSTAT_TXFFLOFF; - } while (fifocnt == DANUBEASC_TXFIFO_FULL); - - if (s[i] == '\0') - { - break; - } - - if (s[i] == '\n') - { - writel('\r', DANUBE_ASC1_TBUF); - do - { - fifocnt = (readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK) - >> ASCFSTAT_TXFFLOFF; - } while (fifocnt == DANUBEASC_TXFIFO_FULL); - } - writel(s[i], DANUBE_ASC1_TBUF); - } - - local_irq_restore(flags); -} - -static int __init -danubeasc_console_setup (struct console *co, char *options) -{ - struct uart_port *port; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (uartclk == 0) - uartclk = danube_get_fpi_hz(); - co->index = 0; - port = &danubeasc_port; - danubeasc_port.uartclk = uartclk; - danubeasc_port.type = PORT_DANUBEASC; - - if (options){ - uart_parse_options(options, &baud, &parity, &bits, &flow); - } - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver danubeasc_reg; -static struct console danubeasc_console = { - name: "ttyS", - write: danubeasc_console_write, - device: uart_console_device, - setup: danubeasc_console_setup, - flags: CON_PRINTBUFFER, - index: -1, - data: &danubeasc_reg, -}; - -static int __init -danubeasc_console_init (void) -{ - register_console(&danubeasc_console); - return 0; -} -console_initcall(danubeasc_console_init); - -static struct uart_driver danubeasc_reg = { - .owner = THIS_MODULE, - .driver_name = "serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = 1, - .cons = &danubeasc_console, -}; - -static int __init -danubeasc_init (void) -{ - unsigned char res; - - uart_register_driver(&danubeasc_reg); - res = uart_add_one_port(&danubeasc_reg, &danubeasc_port); - - return res; -} - -static void __exit -danubeasc_exit (void) -{ - uart_unregister_driver(&danubeasc_reg); -} - -module_init(danubeasc_init); -module_exit(danubeasc_exit); - -MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); -MODULE_DESCRIPTION("MIPS Danube serial port driver"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/danube/files/include/asm-mips/danube/danube.h b/target/linux/danube/files/include/asm-mips/danube/danube.h deleted file mode 100644 index 5bad876e1f..0000000000 --- a/target/linux/danube/files/include/asm-mips/danube/danube.h +++ /dev/null @@ -1,358 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2005 infineon - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ -#ifndef _DANUBE_H__ -#define _DANUBE_H__ - - -/*------------ GENERAL */ - -#define BOARD_SYSTEM_TYPE "DANUBE" - -#define IOPORT_RESOURCE_START 0x10000000 -#define IOPORT_RESOURCE_END 0xffffffff -#define IOMEM_RESOURCE_START 0x10000000 -#define IOMEM_RESOURCE_END 0xffffffff - - -/*------------ ASC1 */ - -#define DANUBE_ASC1_BASE_ADDR (KSEG1 + 0x1E100C00) - -/* FIFO status register */ -#define DANUBE_ASC1_FSTAT ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0048)) -#define ASCFSTAT_TXFFLMASK 0x3F00 -#define ASCFSTAT_TXFFLOFF 8 - -/* ASC1 transmit buffer */ -#define DANUBE_ASC1_TBUF ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0020)) - -/* channel operating modes */ -#define ASCOPT_CSIZE 0x3 -#define ASCOPT_CS7 0x1 -#define ASCOPT_CS8 0x2 -#define ASCOPT_PARENB 0x4 -#define ASCOPT_STOPB 0x8 -#define ASCOPT_PARODD 0x0 -#define ASCOPT_CREAD 0x20 - -/* hardware modified control register */ -#define DANUBE_ASC1_WHBSTATE ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0018)) - -/* receive buffer register */ -#define DANUBE_ASC1_RBUF ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0024)) - -/* status register */ -#define DANUBE_ASC1_STATE ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0014)) - -/* interrupt control */ -#define DANUBE_ASC1_IRNCR ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x00F8)) - -#define ASC_IRNCR_TIR 0x4 -#define ASC_IRNCR_RIR 0x2 -#define ASC_IRNCR_EIR 0x4 - -/* clock control */ -#define DANUBE_ASC1_CLC ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0000)) - -#define DANUBE_ASC1_CLC_DISS 0x2 - -/* port input select register */ -#define DANUBE_ASC1_PISEL ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0004)) - -/* tx fifo */ -#define DANUBE_ASC1_TXFCON ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0044)) - -/* rx fifo */ -#define DANUBE_ASC1_RXFCON ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0040)) - -/* control */ -#define DANUBE_ASC1_CON ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0010)) - -/* timer reload */ -#define DANUBE_ASC1_BG ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0050)) - -/* int enable */ -#define DANUBE_ASC1_IRNREN ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x00F4)) - -#define ASC_IRNREN_RX_BUF 0x8 -#define ASC_IRNREN_TX_BUF 0x4 -#define ASC_IRNREN_ERR 0x2 -#define ASC_IRNREN_TX 0x1 - - -/*------------ RCU */ - -#define DANUBE_RCU_BASE_ADDR 0xBF203000 - -/* reset request */ -#define DANUBE_RCU_REQ ((u32*)(DANUBE_RCU_BASE_ADDR + 0x0010)) -#define DANUBE_RST_ALL 0x40000000 - - -/*------------ MCD */ - -#define DANUBE_MCD_BASE_ADDR (KSEG1 + 0x1F106000) - -/* chip id */ -#define DANUBE_MCD_CHIPID ((u32*)(DANUBE_MCD_BASE_ADDR + 0x0028)) - - -/*------------ GPTU */ - -#define DANUBE_GPTU_BASE_ADDR 0xB8000300 - -/* clock control register */ -#define DANUBE_GPTU_GPT_CLC ((u32*)(DANUBE_GPTU_BASE_ADDR + 0x0000)) - -/* captur reload register */ -#define DANUBE_GPTU_GPT_CAPREL ((u32*)(DANUBE_GPTU_BASE_ADDR + 0x0030)) - -/* timer 6 control register */ -#define DANUBE_GPTU_GPT_T6CON ((u32*)(DANUBE_GPTU_BASE_ADDR + 0x0020)) - - -/*------------ EBU */ - -#define DANUBE_EBU_BASE_ADDR 0xBE105300 - -/* bus configuration register */ -#define DANUBE_EBU_BUSCON0 ((u32*)(DANUBE_EBU_BASE_ADDR + 0x0060)) -#define DANUBE_EBU_PCC_CON ((u32*)(DANUBE_EBU_BASE_ADDR + 0x0090)) -#define DANUBE_EBU_PCC_IEN ((u32*)(DANUBE_EBU_BASE_ADDR + 0x00A4)) -#define DANUBE_EBU_PCC_ISTAT ((u32*)(DANUBE_EBU_BASE_ADDR + 0x00A0)) - - -/*------------ CGU */ - -#define DANUBE_CGU_BASE_ADDR 0xBF103000 - -/* clock mux */ -#define DANUBE_CGU_SYS ((u32*)(DANUBE_CGU_BASE_ADDR + 0x0010)) -#define DANUBE_CGU_IFCCR ((u32*)(DANUBE_CGU_BASE_ADDR + 0x0018)) -#define DANUBE_CGU_PCICR ((u32*)(DANUBE_CGU_BASE_ADDR + 0x0034)) - -#define CLOCK_60M 60000000 -#define CLOCK_83M 83333333 -#define CLOCK_111M 111111111 -#define CLOCK_133M 133333333 -#define CLOCK_167M 166666667 -#define CLOCK_333M 333333333 - - -/*------------ CGU */ - -#define DANUBE_PMU_BASE_ADDR (KSEG1 + 0x1F102000) - -#define DANUBE_PMU_PWDCR ((u32*)(DANUBE_PMU_BASE_ADDR + 0x001C)) -#define DANUBE_PMU_PWDSR ((u32*)(DANUBE_PMU_BASE_ADDR + 0x0020)) - - -/*------------ ICU */ - -#define DANUBE_ICU_BASE_ADDR 0xBF880200 - - -#define DANUBE_ICU_IM0_ISR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0000)) -#define DANUBE_ICU_IM0_IER ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0008)) -#define DANUBE_ICU_IM0_IOSR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0010)) -#define DANUBE_ICU_IM0_IRSR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0018)) -#define DANUBE_ICU_IM0_IMR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0020)) - -#define DANUBE_ICU_IM1_ISR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0028)) - -#define DANUBE_ICU_OFFSET (DANUBE_ICU_IM1_ISR - DANUBE_ICU_IM0_ISR) - - -/*------------ ETOP */ - -#define DANUBE_PPE32_BASE_ADDR 0xBE180000 - -#define ETHERNET_PACKET_DMA_BUFFER_SIZE 0x600 - -#define DANUBE_PPE32_MEM_MAP (DANUBE_PPE32_BASE_ADDR + 0x10000 ) - -#define MII_MODE 1 - -#define REV_MII_MODE 2 - -/* mdio access */ -#define DANUBE_PPE32_MDIO_ACC ((u32*)(DANUBE_PPE32_MEM_MAP + 0x1804)) - -#define MDIO_ACC_REQUEST 0x80000000 -#define MDIO_ACC_READ 0x40000000 -#define MDIO_ACC_ADDR_MASK 0x1f -#define MDIO_ACC_ADDR_OFFSET 0x15 -#define MDIO_ACC_REG_MASK 0xff -#define MDIO_ACC_REG_OFFSET 0x10 -#define MDIO_ACC_VAL_MASK 0xffff - -/* configuration */ -#define DANUBE_PPE32_CFG ((u32*)(DANUBE_PPE32_MEM_MAP + 0x1808)) - -#define PPE32_MII_MASK 0xfffffffc -#define PPE32_MII_NORMAL 0x8 -#define PPE32_MII_REVERSE 0xe - -/* packet length */ -#define DANUBE_PPE32_IG_PLEN_CTRL ((u32*)(DANUBE_PPE32_MEM_MAP + 0x1820)) - -#define PPE32_PLEN_OVER 0x5ee -#define PPE32_PLEN_UNDER 0x400000 - -/* enet */ -#define DANUBE_PPE32_ENET_MAC_CFG ((u32*)(DANUBE_PPE32_MEM_MAP + 0x1840)) - -#define PPE32_CGEN 0x800 - - -/*------------ DMA */ -#define DANUBE_DMA_BASE_ADDR 0xBE104100 - -#define DANUBE_DMA_CS ((u32*)(DANUBE_DMA_BASE_ADDR + 0x18)) -#define DANUBE_DMA_CIE ((u32*)(DANUBE_DMA_BASE_ADDR + 0x2C)) -#define DANUBE_DMA_IRNEN ((u32*)(DANUBE_DMA_BASE_ADDR + 0xf4)) -#define DANUBE_DMA_CCTRL ((u32*)(DANUBE_DMA_BASE_ADDR + 0x1C)) -#define DANUBE_DMA_CIS ((u32*)(DANUBE_DMA_BASE_ADDR + 0x28)) -#define DANUBE_DMA_CDLEN ((u32*)(DANUBE_DMA_BASE_ADDR + 0x24)) -#define DANUBE_DMA_PS ((u32*)(DANUBE_DMA_BASE_ADDR + 0x40)) -#define DANUBE_DMA_PCTRL ((u32*)(DANUBE_DMA_BASE_ADDR + 0x44)) -#define DANUBE_DMA_CTRL ((u32*)(DANUBE_DMA_BASE_ADDR + 0x10)) -#define DANUBE_DMA_CPOLL ((u32*)(DANUBE_DMA_BASE_ADDR + 0x14)) -#define DANUBE_DMA_CDBA ((u32*)(DANUBE_DMA_BASE_ADDR + 0x20)) - - -/*------------ PCI */ -#define PCI_CR_PR_BASE_ADDR (KSEG1 + 0x1E105400) - -#define PCI_CR_FCI_ADDR_MAP0 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00C0)) -#define PCI_CR_FCI_ADDR_MAP1 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00C4)) -#define PCI_CR_FCI_ADDR_MAP2 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00C8)) -#define PCI_CR_FCI_ADDR_MAP3 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00CC)) -#define PCI_CR_FCI_ADDR_MAP4 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00D0)) -#define PCI_CR_FCI_ADDR_MAP5 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00D4)) -#define PCI_CR_FCI_ADDR_MAP6 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00D8)) -#define PCI_CR_FCI_ADDR_MAP7 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00DC)) -#define PCI_CR_CLK_CTRL ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0000)) -#define PCI_CR_PCI_MOD ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0030)) -#define PCI_CR_PC_ARB ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0080)) -#define PCI_CR_FCI_ADDR_MAP11hg ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00E4)) -#define PCI_CR_BAR11MASK ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0044)) -#define PCI_CR_BAR12MASK ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0048)) -#define PCI_CR_BAR13MASK ((u32*)(PCI_CR_PR_BASE_ADDR + 0x004C)) -#define PCI_CS_BASE_ADDR1 ((u32*)(PCI_CS_PR_BASE_ADDR + 0x0010)) -#define PCI_CR_PCI_ADDR_MAP11 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0064)) -#define PCI_CR_FCI_BURST_LENGTH ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00E8)) -#define PCI_CR_PCI_EOI ((u32*)(PCI_CR_PR_BASE_ADDR + 0x002C)) - -#define PCI_CS_PR_BASE_ADDR (KSEG1 + 0x17000000) - -#define PCI_CS_STS_CMD ((u32*)(PCI_CS_PR_BASE_ADDR + 0x0004)) - -#define PCI_MASTER0_REQ_MASK_2BITS 8 -#define PCI_MASTER1_REQ_MASK_2BITS 10 -#define PCI_MASTER2_REQ_MASK_2BITS 12 -#define INTERNAL_ARB_ENABLE_BIT 0 - - -/*------------ WDT */ - -#define DANUBE_WDT_BASE_ADDR (KSEG1 + 0x1F880000) - -#define DANUBE_BIU_WDT_CR ((u32*)(DANUBE_WDT_BASE_ADDR + 0x03F0)) -#define DANUBE_BIU_WDT_SR ((u32*)(DANUBE_WDT_BASE_ADDR + 0x03F8)) - -#define DANUBE_BIU_WDT_CR_GEN (1 << 31) -#define DANUBE_BIU_WDT_CR_DSEN (1 << 30) -#define DANUBE_BIU_WDT_CR_LPEN (1 << 29) - -#define DANUBE_BIU_WDT_CR_CLKDIV_GET(value) (((value) >> 24) & ((1 << 2) - 1)) -#define DANUBE_BIU_WDT_CR_PWL_GET(value) (((value) >> 26) & ((1 << 2) - 1)) -#define DANUBE_BIU_WDT_CR_PWL_SET(value) ((((1 << 2) - 1) & (value)) << 26) -#define DANUBE_BIU_WDT_CR_PW_SET(value) (((( 1 << 8) - 1) & (value)) << 16) -#define DANUBE_BIU_WDT_CR_CLKDIV_SET(value) (((( 1 << 2) - 1) & (value)) << 24) -#define DANUBE_BIU_WDT_CR_RELOAD_SET(value) (((( 1 << 16) - 1) & (value)) << 0) - - -/*------------ LED */ - -#define DANUBE_LED_BASE_ADDR (KSEG1 + 0x1E100BB0) -#define DANUBE_LED_CON0 ((u32*)(DANUBE_LED_BASE_ADDR + 0x0000)) -#define DANUBE_LED_CON1 ((u32*)(DANUBE_LED_BASE_ADDR + 0x0004)) -#define DANUBE_LED_CPU0 ((u32*)(DANUBE_LED_BASE_ADDR + 0x0008)) -#define DANUBE_LED_CPU1 ((u32*)(DANUBE_LED_BASE_ADDR + 0x000C)) -#define DANUBE_LED_AR ((u32*)(DANUBE_LED_BASE_ADDR + 0x0010)) - -#define LED_CON0_SWU (1 << 31) -#define LED_CON0_AD1 (1 << 25) -#define LED_CON0_AD0 (1 << 24) - -#define DANUBE_LED_2HZ (0) -#define DANUBE_LED_4HZ (1 << 23) -#define DANUBE_LED_8HZ (2 << 23) -#define DANUBE_LED_10HZ (3 << 23) -#define DANUBE_LED_MASK (0xf << 23) - -#define DANUBE_LED_UPD_SRC_FPI (1 << 31) -#define DANUBE_LED_UPD_MASK (3 << 30) -#define DANUBE_LED_ADSL_SRC (3 << 24) - -#define DANUBE_LED_GROUP0 (1 << 0) -#define DANUBE_LED_GROUP1 (1 << 1) -#define DANUBE_LED_GROUP2 (1 << 2) - -#define DANUBE_LED_RISING 0 -#define DANUBE_LED_FALLING (1 << 26) -#define DANUBE_LED_EDGE_MASK (1 << 26) - - -/*------------ GPIO */ - -#define DANUBE_GPIO_BASE_ADDR (0xBE100B00) - -#define DANUBE_GPIO_P0_OUT ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0010)) -#define DANUBE_GPIO_P1_OUT ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0040)) -#define DANUBE_GPIO_P0_IN ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0014)) -#define DANUBE_GPIO_P1_IN ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0044)) -#define DANUBE_GPIO_P0_DIR ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0018)) -#define DANUBE_GPIO_P1_DIR ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0048)) -#define DANUBE_GPIO_P0_ALTSEL0 ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x001C)) -#define DANUBE_GPIO_P1_ALTSEL0 ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x004C)) -#define DANUBE_GPIO_P0_ALTSEL1 ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0020)) -#define DANUBE_GPIO_P1_ALTSEL1 ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0050)) -#define DANUBE_GPIO_P0_OD ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0024)) -#define DANUBE_GPIO_P1_OD ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0054)) -#define DANUBE_GPIO_P0_STOFF ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0028)) -#define DANUBE_GPIO_P1_STOFF ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0058)) -#define DANUBE_GPIO_P0_PUDSEL ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x002C)) -#define DANUBE_GPIO_P1_PUDSEL ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x005C)) -#define DANUBE_GPIO_P0_PUDEN ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0030)) -#define DANUBE_GPIO_P1_PUDEN ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0060)) - - -/*------------ SSC */ - -#define DANUBE_SSC1_BASE_ADDR (KSEG1 + 0x1e100800) - - - - - - -#endif diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_dma.h b/target/linux/danube/files/include/asm-mips/danube/danube_dma.h deleted file mode 100644 index 219fd490ed..0000000000 --- a/target/linux/danube/files/include/asm-mips/danube/danube_dma.h +++ /dev/null @@ -1,202 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2005 infineon - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ -#ifndef _DANUBE_DMA_H__ -#define _DANUBE_DMA_H__ - -#define RCV_INT 1 -#define TX_BUF_FULL_INT 2 -#define TRANSMIT_CPT_INT 4 -#define DANUBE_DMA_CH_ON 1 -#define DANUBE_DMA_CH_OFF 0 -#define DANUBE_DMA_CH_DEFAULT_WEIGHT 100 - -enum attr_t{ - TX = 0, - RX = 1, - RESERVED = 2, - DEFAULT = 3, -}; - -#define DMA_OWN 1 -#define CPU_OWN 0 -#define DMA_MAJOR 250 - -#define DMA_DESC_OWN_CPU 0x0 -#define DMA_DESC_OWN_DMA 0x80000000 -#define DMA_DESC_CPT_SET 0x40000000 -#define DMA_DESC_SOP_SET 0x20000000 -#define DMA_DESC_EOP_SET 0x10000000 - -#define MISCFG_MASK 0x40 -#define RDERR_MASK 0x20 -#define CHOFF_MASK 0x10 -#define DESCPT_MASK 0x8 -#define DUR_MASK 0x4 -#define EOP_MASK 0x2 - -#define DMA_DROP_MASK (1<<31) - -#define DANUBE_DMA_RX -1 -#define DANUBE_DMA_TX 1 - -typedef struct dma_chan_map { - char dev_name[15]; - enum attr_t dir; - int pri; - int irq; - int rel_chan_no; -} _dma_chan_map; - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -typedef struct rx_desc{ - u32 data_length:16; - volatile u32 reserved:7; - volatile u32 byte_offset:2; - volatile u32 Burst_length_offset:3; - volatile u32 EoP:1; - volatile u32 Res:1; - volatile u32 C:1; - volatile u32 OWN:1; - volatile u32 Data_Pointer; - /*fix me:should be 28 bits here, 32 bits just for host simulatiuon purpose*/ -}_rx_desc; - -typedef struct tx_desc{ - volatile u32 data_length:16; - volatile u32 reserved1:7; - volatile u32 byte_offset:5; - volatile u32 EoP:1; - volatile u32 SoP:1; - volatile u32 C:1; - volatile u32 OWN:1; - volatile u32 Data_Pointer;//fix me:should be 28 bits here -}_tx_desc; -#else //BIG -typedef struct rx_desc{ - union - { - struct - { - volatile u32 OWN:1; - volatile u32 C:1; - volatile u32 SoP:1; - volatile u32 EoP:1; - volatile u32 Burst_length_offset:3; - volatile u32 byte_offset:2; - volatile u32 reserve:7; - volatile u32 data_length:16; - }field; - volatile u32 word; - }status; - volatile u32 Data_Pointer; -}_rx_desc; - -typedef struct tx_desc{ - union - { - struct - { - volatile u32 OWN:1; - volatile u32 C:1; - volatile u32 SoP:1; - volatile u32 EoP:1; - volatile u32 byte_offset:5; - volatile u32 reserved:7; - volatile u32 data_length:16; - }field; - volatile u32 word; - }status; - volatile u32 Data_Pointer; -}_tx_desc; -#endif //ENDIAN - -typedef struct dma_channel_info{ - /*relative channel number*/ - int rel_chan_no; - /*class for this channel for QoS*/ - int pri; - /*specify byte_offset*/ - int byte_offset; - /*direction*/ - int dir; - /*irq number*/ - int irq; - /*descriptor parameter*/ - int desc_base; - int desc_len; - int curr_desc; - int prev_desc;/*only used if it is a tx channel*/ - /*weight setting for WFQ algorithm*/ - int weight; - int default_weight; - int packet_size; - int burst_len; - /*on or off of this channel*/ - int control; - /**optional information for the upper layer devices*/ -#if defined(CONFIG_DANUBE_ETHERNET_D2) || defined(CONFIG_DANUBE_PPA) - void* opt[64]; -#else - void* opt[25]; -#endif - /*Pointer to the peripheral device who is using this channel*/ - void* dma_dev; - /*channel operations*/ - void (*open)(struct dma_channel_info* pCh); - void (*close)(struct dma_channel_info* pCh); - void (*reset)(struct dma_channel_info* pCh); - void (*enable_irq)(struct dma_channel_info* pCh); - void (*disable_irq)(struct dma_channel_info* pCh); -}_dma_channel_info; - -typedef struct dma_device_info{ - /*device name of this peripheral*/ - char device_name[15]; - int reserved; - int tx_burst_len; - int rx_burst_len; - int default_weight; - int current_tx_chan; - int current_rx_chan; - int num_tx_chan; - int num_rx_chan; - int max_rx_chan_num; - int max_tx_chan_num; - _dma_channel_info* tx_chan[20]; - _dma_channel_info* rx_chan[20]; - /*functions, optional*/ - u8* (*buffer_alloc)(int len,int* offset, void** opt); - void (*buffer_free)(u8* dataptr, void* opt); - int (*intr_handler)(struct dma_device_info* info, int status); - void * priv; /* used by peripheral driver only */ -}_dma_device_info; - -_dma_device_info* dma_device_reserve(char* dev_name); - -void dma_device_release(_dma_device_info* dev); - -void dma_device_register(_dma_device_info* info); - -void dma_device_unregister(_dma_device_info* info); - -int dma_device_read(struct dma_device_info* info, u8** dataptr, void** opt); - -int dma_device_write(struct dma_device_info* info, u8* dataptr, int len, void* opt); -#endif diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_gpio.h b/target/linux/danube/files/include/asm-mips/danube/danube_gpio.h deleted file mode 100644 index 2ea8d9cf7d..0000000000 --- a/target/linux/danube/files/include/asm-mips/danube/danube_gpio.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ -#ifndef _DANUBE_GPIO_H__ -#define _DANUBE_GPIO_H__ - -extern int danube_port_reserve_pin (unsigned int port, unsigned int pin); -extern int danube_port_free_pin (unsigned int port, unsigned int pin); -extern int danube_port_set_open_drain (unsigned int port, unsigned int pin); -extern int danube_port_clear_open_drain (unsigned int port, unsigned int pin); -extern int danube_port_set_pudsel (unsigned int port, unsigned int pin); -extern int danube_port_clear_pudsel (unsigned int port, unsigned int pin); -extern int danube_port_set_puden (unsigned int port, unsigned int pin); -extern int danube_port_clear_puden (unsigned int port, unsigned int pin); -extern int danube_port_set_stoff (unsigned int port, unsigned int pin); -extern int danube_port_clear_stoff (unsigned int port, unsigned int pin); -extern int danube_port_set_dir_out (unsigned int port, unsigned int pin); -extern int danube_port_set_dir_in (unsigned int port, unsigned int pin); -extern int danube_port_set_output (unsigned int port, unsigned int pin); -extern int danube_port_clear_output (unsigned int port, unsigned int pin); -extern int danube_port_get_input (unsigned int port, unsigned int pin); -extern int danube_port_set_altsel0 (unsigned int port, unsigned int pin); -extern int danube_port_clear_altsel0 (unsigned int port, unsigned int pin); -extern int danube_port_set_altsel1 (unsigned int port, unsigned int pin); -extern int danube_port_clear_altsel1 (unsigned int port, unsigned int pin); - -#endif diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_ioctl.h b/target/linux/danube/files/include/asm-mips/danube/danube_ioctl.h deleted file mode 100644 index 6d14f5d060..0000000000 --- a/target/linux/danube/files/include/asm-mips/danube/danube_ioctl.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ -#ifndef _DANUBE_IOCTL_H__ -#define _DANUBE_IOCTL_H__ - -/*------------ LED */ - -struct danube_port_ioctl_parm -{ - int port; - int pin; - int value; -}; - -#define DANUBE_PORT_IOC_MAGIC 0xbf -#define DANUBE_PORT_IOCOD _IOW(DANUBE_PORT_IOC_MAGIC,0,struct danube_port_ioctl_parm) -#define DANUBE_PORT_IOCPUDSEL _IOW(DANUBE_PORT_IOC_MAGIC,1,struct danube_port_ioctl_parm) -#define DANUBE_PORT_IOCPUDEN _IOW(DANUBE_PORT_IOC_MAGIC,2,struct danube_port_ioctl_parm) -#define DANUBE_PORT_IOCSTOFF _IOW(DANUBE_PORT_IOC_MAGIC,3,struct danube_port_ioctl_parm) -#define DANUBE_PORT_IOCDIR _IOW(DANUBE_PORT_IOC_MAGIC,4,struct danube_port_ioctl_parm) -#define DANUBE_PORT_IOCOUTPUT _IOW(DANUBE_PORT_IOC_MAGIC,5,struct danube_port_ioctl_parm) -#define DANUBE_PORT_IOCINPUT _IOWR(DANUBE_PORT_IOC_MAGIC,6,struct danube_port_ioctl_parm) -#define DANUBE_PORT_IOCALTSEL0 _IOW(DANUBE_PORT_IOC_MAGIC,7,struct danube_port_ioctl_parm) -#define DANUBE_PORT_IOCALTSEL1 _IOW(DANUBE_PORT_IOC_MAGIC,8,struct danube_port_ioctl_parm) - -#endif diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_irq.h b/target/linux/danube/files/include/asm-mips/danube/danube_irq.h deleted file mode 100644 index 45796831fe..0000000000 --- a/target/linux/danube/files/include/asm-mips/danube/danube_irq.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2005 infineon - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ -#ifndef _DANUBE_IRQ__ -#define _DANUBE_IRQ__ - -#define INT_NUM_IRQ0 8 -#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0) -#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32) -#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64) -#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96) -#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128) -#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0) - -#define DANUBEASC1_TIR (INT_NUM_IM3_IRL0 + 7) -#define DANUBEASC1_RIR (INT_NUM_IM3_IRL0 + 9) -#define DANUBEASC1_EIR (INT_NUM_IM3_IRL0 + 10) - -#define DANUBE_SSC_TIR (INT_NUM_IM0_IRL0 + 15) -#define DANUBE_SSC_RIR (INT_NUM_IM0_IRL0 + 14) -#define DANUBE_SSC_EIR (INT_NUM_IM0_IRL0 + 16) - -#define DANUBE_TIMER6_INT (INT_NUM_IM1_IRL0 + 23) - -#define MIPS_CPU_TIMER_IRQ 7 - -#define DANUBE_DMA_CH0_INT (INT_NUM_IM2_IRL0) -#define DANUBE_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1) -#define DANUBE_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2) -#define DANUBE_DMA_CH3_INT (INT_NUM_IM2_IRL0 + 3) -#define DANUBE_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4) -#define DANUBE_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5) -#define DANUBE_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6) -#define DANUBE_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7) -#define DANUBE_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8) -#define DANUBE_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9) -#define DANUBE_DMA_CH10_INT (INT_NUM_IM2_IRL0 + 10) -#define DANUBE_DMA_CH11_INT (INT_NUM_IM2_IRL0 + 11) -#define DANUBE_DMA_CH12_INT (INT_NUM_IM2_IRL0 + 25) -#define DANUBE_DMA_CH13_INT (INT_NUM_IM2_IRL0 + 26) -#define DANUBE_DMA_CH14_INT (INT_NUM_IM2_IRL0 + 27) -#define DANUBE_DMA_CH15_INT (INT_NUM_IM2_IRL0 + 28) -#define DANUBE_DMA_CH16_INT (INT_NUM_IM2_IRL0 + 29) -#define DANUBE_DMA_CH17_INT (INT_NUM_IM2_IRL0 + 30) -#define DANUBE_DMA_CH18_INT (INT_NUM_IM2_IRL0 + 16) -#define DANUBE_DMA_CH19_INT (INT_NUM_IM2_IRL0 + 21) - -extern void mask_and_ack_danube_irq (unsigned int irq_nr); - -#endif diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_mii0.h b/target/linux/danube/files/include/asm-mips/danube/danube_mii0.h deleted file mode 100644 index 6f96ef6b79..0000000000 --- a/target/linux/danube/files/include/asm-mips/danube/danube_mii0.h +++ /dev/null @@ -1,254 +0,0 @@ -#ifndef DANUBE_SW_H -#define DANUBE_SW_H - - - -/****************************************************************************** -** -** FILE NAME : danube_sw.h -** PROJECT : Danube -** MODULES : ETH Interface (MII0) -** -** DATE : 11 AUG 2005 -** AUTHOR : Wu Qi Ming -** DESCRIPTION : ETH Interface (MII0) Driver Header File -** COPYRIGHT : Copyright (c) 2006 -** Infineon Technologies AG -** Am Campeon 1-12, 85579 Neubiberg, Germany -** -** This program is free software; you can redistribute it and/or modify -** it under the terms of the GNU General Public License as published by -** the Free Software Foundation; either version 2 of the License, or -** (at your option) any later version. -** -** HISTORY -** $Date $Author $Comment -** 11 AUG 2005 Wu Qi Ming Initiate Version -** 23 OCT 2006 Xu Liang Add GPL header. -*******************************************************************************/ - - -#define SET_ETH_SPEED_AUTO SIOCDEVPRIVATE -#define SET_ETH_SPEED_10 SIOCDEVPRIVATE+1 -#define SET_ETH_SPEED_100 SIOCDEVPRIVATE+2 -#define SET_ETH_DUPLEX_AUTO SIOCDEVPRIVATE+3 -#define SET_ETH_DUPLEX_HALF SIOCDEVPRIVATE+4 -#define SET_ETH_DUPLEX_FULL SIOCDEVPRIVATE+5 -#define SET_ETH_REG SIOCDEVPRIVATE+6 -#define VLAN_TOOLS SIOCDEVPRIVATE+7 -#define MAC_TABLE_TOOLS SIOCDEVPRIVATE+8 -#define SET_VLAN_COS SIOCDEVPRIVATE+9 -#define SET_DSCP_COS SIOCDEVPRIVATE+10 -#define ENABLE_VLAN_CLASSIFICATION SIOCDEVPRIVATE+11 -#define DISABLE_VLAN_CLASSIFICATION SIOCDEVPRIVATE+12 -#define VLAN_CLASS_FIRST SIOCDEVPRIVATE+13 -#define VLAN_CLASS_SECOND SIOCDEVPRIVATE+14 -#define ENABLE_DSCP_CLASSIFICATION SIOCDEVPRIVATE+15 -#define DISABLE_DSCP_CLASSIFICATION SIOCDEVPRIVATE+16 -#define PASS_UNICAST_PACKETS SIOCDEVPRIVATE+17 -#define FILTER_UNICAST_PACKETS SIOCDEVPRIVATE+18 -#define KEEP_BROADCAST_PACKETS SIOCDEVPRIVATE+19 -#define DROP_BROADCAST_PACKETS SIOCDEVPRIVATE+20 -#define KEEP_MULTICAST_PACKETS SIOCDEVPRIVATE+21 -#define DROP_MULTICAST_PACKETS SIOCDEVPRIVATE+22 - - -/*===mac table commands==*/ -#define RESET_MAC_TABLE 0 -#define READ_MAC_ENTRY 1 -#define WRITE_MAC_ENTRY 2 -#define ADD_MAC_ENTRY 3 - -/*====vlan commands===*/ - -#define CHANGE_VLAN_CTRL 0 -#define READ_VLAN_ENTRY 1 -#define UPDATE_VLAN_ENTRY 2 -#define CLEAR_VLAN_ENTRY 3 -#define RESET_VLAN_TABLE 4 -#define ADD_VLAN_ENTRY 5 - -/* -** MDIO constants. -*/ - -#define MDIO_BASE_STATUS_REG 0x1 -#define MDIO_BASE_CONTROL_REG 0x0 -#define MDIO_PHY_ID_HIGH_REG 0x2 -#define MDIO_PHY_ID_LOW_REG 0x3 -#define MDIO_BC_NEGOTIATE 0x0200 -#define MDIO_BC_FULL_DUPLEX_MASK 0x0100 -#define MDIO_BC_AUTO_NEG_MASK 0x1000 -#define MDIO_BC_SPEED_SELECT_MASK 0x2000 -#define MDIO_STATUS_100_FD 0x4000 -#define MDIO_STATUS_100_HD 0x2000 -#define MDIO_STATUS_10_FD 0x1000 -#define MDIO_STATUS_10_HD 0x0800 -#define MDIO_STATUS_SPEED_DUPLEX_MASK 0x7800 -#define MDIO_ADVERTISMENT_REG 0x4 -#define MDIO_ADVERT_100_FD 0x100 -#define MDIO_ADVERT_100_HD 0x080 -#define MDIO_ADVERT_10_FD 0x040 -#define MDIO_ADVERT_10_HD 0x020 -#define MDIO_LINK_UP_MASK 0x4 -#define MDIO_START 0x1 -#define MDIO_READ 0x2 -#define MDIO_WRITE 0x1 -#define MDIO_PREAMBLE 0xfffffffful - -#define PHY_RESET 0x8000 -#define AUTO_NEGOTIATION_ENABLE 0X1000 -#define AUTO_NEGOTIATION_COMPLETE 0x20 -#define RESTART_AUTO_NEGOTIATION 0X200 - - -/*ETOP_MDIO_CFG MASKS*/ -#define SMRST_MASK 0X2000 -#define PHYA1_MASK 0X1F00 -#define PHYA0_MASK 0XF8 -#define UMM1_MASK 0X4 -#define UMM0_MASK 0X2 - -/*ETOP_MDIO_ACCESS MASKS*/ -#define MDIO_RA_MASK 0X80000000 -#define MDIO_RW_MASK 0X40000000 - - -/*ENET_MAC_CFG MASKS*/ -#define BP_MASK 1<<12 -#define CGEN_MASK 1<<11 -#define IFG_MASK 0x3F<<5 -#define IPAUS_MASK 1<<4 -#define EPAUS_MASK 1<<3 -#define DUPLEX_MASK 1<<2 -#define SPEED_MASK 0x2 -#define LINK_MASK 1 - -/*ENETS_CoS_CFG MASKS*/ -#define VLAN_MASK 2 -#define DSCP_MASK 1 - -/*ENET_CFG MASKS*/ -#define VL2_MASK 1<<29 -#define FTUC_MASK 1<<25 -#define DPBC_MASK 1<<24 -#define DPMC_MASK 1<<23 - -#define PHY0_ADDR 0 -#define PHY1_ADDR 1 -#define P1M 0 - -#define DANUBE_SW_REG32(reg_num) *((volatile u32*)(reg_num)) - -#define OK 0; - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -typedef struct mac_table_entry{ - u64 mac_address:48; - u64 p0:1; - u64 p1:1; - u64 p2:1; - u64 cr:1; - u64 ma_st:3; - u64 res:9; -}_mac_table_entry; - -typedef struct IFX_Switch_VLanTableEntry{ - u32 vlan_id:12; - u32 mp0:1; - u32 mp1:1; - u32 mp2:1; - u32 v:1; - u32 res:16; -}_IFX_Switch_VLanTableEntry; - -typedef struct mac_table_req{ - int cmd; - int index; - u32 data; - u64 entry_value; -}_mac_table_req; - -#else //not CONFIG_CPU_LITTLE_ENDIAN -typedef struct mac_table_entry{ - u64 mac_address:48; - u64 p0:1; - u64 p1:1; - u64 p2:1; - u64 cr:1; - u64 ma_st:3; - u64 res:9; -}_mac_table_entry; - -typedef struct IFX_Switch_VLanTableEntry{ - u32 vlan_id:12; - u32 mp0:1; - u32 mp1:1; - u32 mp2:1; - u32 v:1; - u32 res:16; -}_IFX_Switch_VLanTableEntry; - - -typedef struct mac_table_req{ - int cmd; - int index; - u32 data; - u64 entry_value; -}_mac_table_req; - -#endif //CONFIG_CPU_LITTLE_ENDIAN - -typedef struct vlan_cos_req{ - int pri; - int cos_value; -}_vlan_cos_req; - -typedef struct dscp_cos_req{ - int dscp; - int cos_value; -}_dscp_cos_req; - - -typedef struct vlan_req{ - int cmd; - int index; - u32 data; - u32 entry_value; -}_vlan_req; - -typedef struct data_req{ - int index; - u32 value; -}_data_req; - -enum duplex -{ - half, - full, - autoneg -}; - -struct switch_priv { - struct net_device_stats stats; - int rx_packetlen; - u8 *rx_packetdata; - int rx_status; - int tx_packetlen; -#ifdef CONFIG_NET_HW_FLOWCONTROL - int fc_bit; -#endif //CONFIG_NET_HW_FLOWCONTROL - u8 *tx_packetdata; - int tx_status; - struct dma_device_info *dma_device; - struct sk_buff *skb; - spinlock_t lock; - int mdio_phy_addr; - int current_speed; - int current_speed_selection; - int rx_queue_len; - int full_duplex; - enum duplex current_duplex; -}; - -#endif //DANUBE_SW_H diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_orig.h b/target/linux/danube/files/include/asm-mips/danube/danube_orig.h deleted file mode 100644 index 4197933f85..0000000000 --- a/target/linux/danube/files/include/asm-mips/danube/danube_orig.h +++ /dev/null @@ -1,2021 +0,0 @@ -#ifndef DANUBE_H -#define DANUBE_H -/****************************************************************************** - Copyright (c) 2002, Infineon Technologies. All rights reserved. - - No Warranty - Because the program is licensed free of charge, there is no warranty for - the program, to the extent permitted by applicable law. Except when - otherwise stated in writing the copyright holders and/or other parties - provide the program "as is" without warranty of any kind, either - expressed or implied, including, but not limited to, the implied - warranties of merchantability and fitness for a particular purpose. The - entire risk as to the quality and performance of the program is with - you. should the program prove defective, you assume the cost of all - necessary servicing, repair or correction. - - In no event unless required by applicable law or agreed to in writing - will any copyright holder, or any other party who may modify and/or - redistribute the program as permitted above, be liable to you for - damages, including any general, special, incidental or consequential - damages arising out of the use or inability to use the program - (including but not limited to loss of data or data being rendered - inaccurate or losses sustained by you or third parties or a failure of - the program to operate with any other programs), even if such holder or - other party has been advised of the possibility of such damages. -******************************************************************************/ - -/***********************************************************************/ -/* Module : WDT register address and bits */ -/***********************************************************************/ - -#define BOARD_SYSTEM_TYPE "DANUBE" - -#define DANUBE_BIU_WDT (KSEG1+0x1F880000) - -/***Watchdog Timer Control Register ***/ -#define DANUBE_BIU_WDT_CR ((volatile u32*)(DANUBE_BIU_WDT + 0x03F0)) -#define DANUBE_BIU_WDT_CR_GEN (1 << 31) -#define DANUBE_BIU_WDT_CR_DSEN (1 << 30) -#define DANUBE_BIU_WDT_CR_LPEN (1 << 29) -#define DANUBE_BIU_WDT_CR_PWL_GET(value) (((value) >> 26) & ((1 << 2) - 1)) -#define DANUBE_BIU_WDT_CR_PWL_SET(value) (((( 1 << 2) - 1) & (value)) << 26) -#define DANUBE_BIU_WDT_CR_CLKDIV_GET(value) (((value) >> 24) & ((1 << 2) - 1)) -#define DANUBE_BIU_WDT_CR_CLKDIV_SET(value) (((( 1 << 2) - 1) & (value)) << 24) -#define DANUBE_BIU_WDT_CR_PW_GET(value) (((value) >> 16) & ((1 << 8) - 1)) -#define DANUBE_BIU_WDT_CR_PW_SET(value) (((( 1 << 8) - 1) & (value)) << 16) -#define DANUBE_BIU_WDT_CR_RELOAD_GET(value) (((value) >> 0) & ((1 << 16) - 1)) -#define DANUBE_BIU_WDT_CR_RELOAD_SET(value) (((( 1 << 16) - 1) & (value)) << 0) - -/***Watchdog Timer Status Register***/ -#define DANUBE_BIU_WDT_SR ((volatile u32*)(DANUBE_BIU_WDT + 0x03F8)) -#define DANUBE_BIU_WDT_SR_EN (1 << 31) -#define DANUBE_BIU_WDT_SR_AE (1 << 30) -#define DANUBE_BIU_WDT_SR_PRW (1 << 29) -#define DANUBE_BIU_WDT_SR_EXP (1 << 28) -#define DANUBE_BIU_WDT_SR_PWD (1 << 27) -#define DANUBE_BIU_WDT_SR_DS (1 << 26) -#define DANUBE_BIU_WDT_SR_VALUE_GET(value) (((value) >> 0) & ((1 << 16) - 1)) -#define DANUBE_BIU_WDT_SR_VALUE_SET(value) (((( 1 << 16) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : PMU register address and bits */ -/***********************************************************************/ - -#define DANUBE_PMU (KSEG1+0x1F102000) - -/* PMU Power down Control Register */ -#define DANUBE_PMU_PWDCR ((volatile u32*)(DANUBE_PMU+0x001C)) -#define DANUBE_PMU_PWDCR_GPT (1 << 12) -#define DANUBE_PMU_PWDCR_FPI (1 << 14) - - -/* PMU Status Register */ -#define DANUBE_PMU_SR ((volatile u32*)(DANUBE_PMU+0x0020)) - -#define DANUBE_PMU_DMA_SHIFT 5 -#define DANUBE_PMU_PPE_SHIFT 13 -#define DANUBE_PMU_SDIO_SHIFT 16 -#define DANUBE_PMU_ETOP_SHIFT 22 -#define DANUBE_PMU_ENET0_SHIFT 24 -#define DANUBE_PMU_ENET1_SHIFT 25 - -/***********************************************************************/ -/* Module : RCU register address and bits */ -/***********************************************************************/ -#define DANUBE_RCU_BASE_ADDR (0xBF203000) - -#define DANUBE_RCU_REQ (0x0010 + DANUBE_RCU_BASE_ADDR) /* will remove this, pls use DANUBE_RCU_RST_REQ */ - -#define DANUBE_RCU_RST_REQ ((volatile u32*)(DANUBE_RCU_BASE_ADDR + 0x0010)) -#define DANUBE_RCU_RST_STAT ((volatile u32*)(DANUBE_RCU_BASE_ADDR + 0x0014)) -#define DANUBE_RST_ALL (0x40000000) - -/***Reset Request Register***/ -#define DANUBE_RCU_RST_REQ_CPU0 (1 << 31) -#define DANUBE_RCU_RST_REQ_CPU1 (1 << 3) -#define DANUBE_RCU_RST_REQ_CPUSUB (1 << 29) -#define DANUBE_RCU_RST_REQ_HRST (1 << 28) -#define DANUBE_RCU_RST_REQ_WDT0 (1 << 27) -#define DANUBE_RCU_RST_REQ_WDT1 (1 << 26) -#define DANUBE_RCU_RST_REQ_CFG_GET(value) (((value) >> 23) & ((1 << 3) - 1)) -#define DANUBE_RCU_RST_REQ_CFG_SET(value) (((( 1 << 3) - 1) & (value)) << 23) -#define DANUBE_RCU_RST_REQ_SWTBOOT (1 << 22) -#define DANUBE_RCU_RST_REQ_DMA (1 << 21) -#define DANUBE_RCU_RST_REQ_ARC_JTAG (1 << 20) -#define DANUBE_RCU_RST_REQ_ETHPHY0 (1 << 19) -#define DANUBE_RCU_RST_REQ_CPU0_BR (1 << 18) - -#define DANBUE_RCU_RST_REQ_AFE (1 << 11) -#define DANBUE_RCU_RST_REQ_DFE (1 << 7) - -/* CPU0, CPU1, CPUSUB, HRST, WDT0, WDT1, DMA, ETHPHY1, ETHPHY0 */ -#define DANUBE_RCU_RST_REQ_ALL DANUBE_RST_ALL - -#define DANUBE_RCU_STAT (0x0014 + DANUBE_RCU_BASE_ADDR) -#define DANUBE_RCU_RST_SR ( (volatile u32 *)(DANUBE_RCU_STAT)) /* will remove this, pls use DANUBE_RCU_RST_STAT */ - -/*#define DANUBE_RCU_MON (0x0030 + DANUBE_RCU_BASE_ADDR) */ - -/***********************************************************************/ -/* Module : BCU register address and bits */ -/***********************************************************************/ - -#define DANUBE_BCU_BASE_ADDR (KSEG1+0x1E100000) - -/***BCU Control Register (0010H)***/ -#define DANUBE_BCU_CON ((volatile u32*)(0x0010 + DANUBE_BCU_BASE_ADDR)) -#define DANUBE_BCU_BCU_CON_SPC (value) (((( 1 << 8) - 1) & (value)) << 24) -#define DANUBE_BCU_BCU_CON_SPE (1 << 19) -#define DANUBE_BCU_BCU_CON_PSE (1 << 18) -#define DANUBE_BCU_BCU_CON_DBG (1 << 16) -#define DANUBE_BCU_BCU_CON_TOUT (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***BCU Error Control Capture Register (0020H)***/ -#define DANUBE_BCU_ECON ((volatile u32*)(0x0020 + DANUBE_BCU_BASE_ADDR)) -#define DANUBE_BCU_BCU_ECON_TAG (value) (((( 1 << 4) - 1) & (value)) << 24) -#define DANUBE_BCU_BCU_ECON_RDN (1 << 23) -#define DANUBE_BCU_BCU_ECON_WRN (1 << 22) -#define DANUBE_BCU_BCU_ECON_SVM (1 << 21) -#define DANUBE_BCU_BCU_ECON_ACK (value) (((( 1 << 2) - 1) & (value)) << 19) -#define DANUBE_BCU_BCU_ECON_ABT (1 << 18) -#define DANUBE_BCU_BCU_ECON_RDY (1 << 17) -#define DANUBE_BCU_BCU_ECON_TOUT (1 << 16) -#define DANUBE_BCU_BCU_ECON_ERRCNT (value) (((( 1 << 16) - 1) & (value)) << 0) -#define DANUBE_BCU_BCU_ECON_OPC (value) (((( 1 << 4) - 1) & (value)) << 28) - -/***BCU Error Address Capture Register (0024 H)***/ -#define DANUBE_BCU_EADD ((volatile u32*)(0x0024 + DANUBE_BCU_BASE_ADDR)) - -/***BCU Error Data Capture Register (0028H)***/ -#define DANUBE_BCU_EDAT ((volatile u32*)(0x0028 + DANUBE_BCU_BASE_ADDR)) -#define DANUBE_BCU_IRNEN ((volatile u32*)(0x00F4 + DANUBE_BCU_BASE_ADDR)) -#define DANUBE_BCU_IRNICR ((volatile u32*)(0x00F8 + DANUBE_BCU_BASE_ADDR)) -#define DANUBE_BCU_IRNCR ((volatile u32*)(0x00FC + DANUBE_BCU_BASE_ADDR)) - -/***********************************************************************/ -/* Module : MBC register address and bits */ -/***********************************************************************/ - -#define DANUBE_MBC (0xBF103000) -/***********************************************************************/ - -/***Mailbox CPU Configuration Register***/ -#define DANUBE_MBC_MBC_CFG ((volatile u32*)(DANUBE_MBC+ 0x0080)) -#define DANUBE_MBC_MBC_CFG_SWAP (value) (((( 1 << 2) - 1) & (value)) << 6) -#define DANUBE_MBC_MBC_CFG_RES (1 << 5) -#define DANUBE_MBC_MBC_CFG_FWID (value) (((( 1 << 4) - 1) & (value)) << 1) -#define DANUBE_MBC_MBC_CFG_SIZE (1 << 0) - -/***Mailbox CPU Interrupt Status Register***/ -#define DANUBE_MBC_MBC_ISR ((volatile u32*)(DANUBE_MBC+ 0x0084)) -#define DANUBE_MBC_MBC_ISR_B3DA (1 << 31) -#define DANUBE_MBC_MBC_ISR_B2DA (1 << 30) -#define DANUBE_MBC_MBC_ISR_B1E (1 << 29) -#define DANUBE_MBC_MBC_ISR_B0E (1 << 28) -#define DANUBE_MBC_MBC_ISR_WDT (1 << 27) -#define DANUBE_MBC_MBC_ISR_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) - -/***Mailbox CPU Mask Register***/ -#define DANUBE_MBC_MBC_MSK ((volatile u32*)(DANUBE_MBC+ 0x0088)) -#define DANUBE_MBC_MBC_MSK_B3DA (1 << 31) -#define DANUBE_MBC_MBC_MSK_B2DA (1 << 30) -#define DANUBE_MBC_MBC_MSK_B1E (1 << 29) -#define DANUBE_MBC_MBC_MSK_B0E (1 << 28) -#define DANUBE_MBC_MBC_MSK_WDT (1 << 27) -#define DANUBE_MBC_MBC_MSK_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) - -/***Mailbox CPU Mask 01 Register***/ -#define DANUBE_MBC_MBC_MSK01 ((volatile u32*)(DANUBE_MBC+ 0x008C)) -#define DANUBE_MBC_MBC_MSK01_B3DA (1 << 31) -#define DANUBE_MBC_MBC_MSK01_B2DA (1 << 30) -#define DANUBE_MBC_MBC_MSK01_B1E (1 << 29) -#define DANUBE_MBC_MBC_MSK01_B0E (1 << 28) -#define DANUBE_MBC_MBC_MSK01_WDT (1 << 27) -#define DANUBE_MBC_MBC_MSK01_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) - -/***Mailbox CPU Mask 10 Register***/ -#define DANUBE_MBC_MBC_MSK10 ((volatile u32*)(DANUBE_MBC+ 0x0090)) -#define DANUBE_MBC_MBC_MSK10_B3DA (1 << 31) -#define DANUBE_MBC_MBC_MSK10_B2DA (1 << 30) -#define DANUBE_MBC_MBC_MSK10_B1E (1 << 29) -#define DANUBE_MBC_MBC_MSK10_B0E (1 << 28) -#define DANUBE_MBC_MBC_MSK10_WDT (1 << 27) -#define DANUBE_MBC_MBC_MSK10_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) - -/***Mailbox CPU Short Command Register***/ -#define DANUBE_MBC_MBC_CMD ((volatile u32*)(DANUBE_MBC+ 0x0094)) -#define DANUBE_MBC_MBC_CMD_CS270 (value) (((( 1 << 28) - 1) & (value)) << 0) - -/***Mailbox CPU Input Data of Buffer 0***/ -#define DANUBE_MBC_MBC_ID0 ((volatile u32*)(DANUBE_MBC+ 0x0000)) -#define DANUBE_MBC_MBC_ID0_INDATA - -/***Mailbox CPU Input Data of Buffer 1***/ -#define DANUBE_MBC_MBC_ID1 ((volatile u32*)(DANUBE_MBC+ 0x0020)) -#define DANUBE_MBC_MBC_ID1_INDATA - -/***Mailbox CPU Output Data of Buffer 2***/ -#define DANUBE_MBC_MBC_OD2 ((volatile u32*)(DANUBE_MBC+ 0x0040)) -#define DANUBE_MBC_MBC_OD2_OUTDATA - -/***Mailbox CPU Output Data of Buffer 3***/ -#define DANUBE_MBC_MBC_OD3 ((volatile u32*)(DANUBE_MBC+ 0x0060)) -#define DANUBE_MBC_MBC_OD3_OUTDATA - -/***Mailbox CPU Control Register of Buffer 0***/ -#define DANUBE_MBC_MBC_CR0 ((volatile u32*)(DANUBE_MBC+ 0x0004)) -#define DANUBE_MBC_MBC_CR0_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***Mailbox CPU Control Register of Buffer 1***/ -#define DANUBE_MBC_MBC_CR1 ((volatile u32*)(DANUBE_MBC+ 0x0024)) -#define DANUBE_MBC_MBC_CR1_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***Mailbox CPU Control Register of Buffer 2***/ -#define DANUBE_MBC_MBC_CR2 ((volatile u32*)(DANUBE_MBC+ 0x0044)) -#define DANUBE_MBC_MBC_CR2_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***Mailbox CPU Control Register of Buffer 3***/ -#define DANUBE_MBC_MBC_CR3 ((volatile u32*)(DANUBE_MBC+ 0x0064)) -#define DANUBE_MBC_MBC_CR3_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***Mailbox CPU Free Space of Buffer 0***/ -#define DANUBE_MBC_MBC_FS0 ((volatile u32*)(DANUBE_MBC+ 0x0008)) -#define DANUBE_MBC_MBC_FS0_FS - -/***Mailbox CPU Free Space of Buffer 1***/ -#define DANUBE_MBC_MBC_FS1 ((volatile u32*)(DANUBE_MBC+ 0x0028)) -#define DANUBE_MBC_MBC_FS1_FS - -/***Mailbox CPU Free Space of Buffer 2***/ -#define DANUBE_MBC_MBC_FS2 ((volatile u32*)(DANUBE_MBC+ 0x0048)) -#define DANUBE_MBC_MBC_FS2_FS - -/***Mailbox CPU Free Space of Buffer 3***/ -#define DANUBE_MBC_MBC_FS3 ((volatile u32*)(DANUBE_MBC+ 0x0068)) -#define DANUBE_MBC_MBC_FS3_FS - -/***Mailbox CPU Data Available in Buffer 0***/ -#define DANUBE_MBC_MBC_DA0 ((volatile u32*)(DANUBE_MBC+ 0x000C)) -#define DANUBE_MBC_MBC_DA0_DA - -/***Mailbox CPU Data Available in Buffer 1***/ -#define DANUBE_MBC_MBC_DA1 ((volatile u32*)(DANUBE_MBC+ 0x002C)) -#define DANUBE_MBC_MBC_DA1_DA - -/***Mailbox CPU Data Available in Buffer 2***/ -#define DANUBE_MBC_MBC_DA2 ((volatile u32*)(DANUBE_MBC+ 0x004C)) -#define DANUBE_MBC_MBC_DA2_DA - -/***Mailbox CPU Data Available in Buffer 3***/ -#define DANUBE_MBC_MBC_DA3 ((volatile u32*)(DANUBE_MBC+ 0x006C)) -#define DANUBE_MBC_MBC_DA3_DA - -/***Mailbox CPU Input Absolute Pointer of Buffer 0***/ -#define DANUBE_MBC_MBC_IABS0 ((volatile u32*)(DANUBE_MBC+ 0x0010)) -#define DANUBE_MBC_MBC_IABS0_IABS - -/***Mailbox CPU Input Absolute Pointer of Buffer 1***/ -#define DANUBE_MBC_MBC_IABS1 ((volatile u32*)(DANUBE_MBC+ 0x0030)) -#define DANUBE_MBC_MBC_IABS1_IABS - -/***Mailbox CPU Input Absolute Pointer of Buffer 2***/ -#define DANUBE_MBC_MBC_IABS2 ((volatile u32*)(DANUBE_MBC+ 0x0050)) -#define DANUBE_MBC_MBC_IABS2_IABS - -/***Mailbox CPU Input Absolute Pointer of Buffer 3***/ -#define DANUBE_MBC_MBC_IABS3 ((volatile u32*)(DANUBE_MBC+ 0x0070)) -#define DANUBE_MBC_MBC_IABS3_IABS - -/***Mailbox CPU Input Temporary Pointer of Buffer 0***/ -#define DANUBE_MBC_MBC_ITMP0 ((volatile u32*)(DANUBE_MBC+ 0x0014)) -#define DANUBE_MBC_MBC_ITMP0_ITMP - -/***Mailbox CPU Input Temporary Pointer of Buffer 1***/ -#define DANUBE_MBC_MBC_ITMP1 ((volatile u32*)(DANUBE_MBC+ 0x0034)) -#define DANUBE_MBC_MBC_ITMP1_ITMP - -/***Mailbox CPU Input Temporary Pointer of Buffer 2***/ -#define DANUBE_MBC_MBC_ITMP2 ((volatile u32*)(DANUBE_MBC+ 0x0054)) -#define DANUBE_MBC_MBC_ITMP2_ITMP - -/***Mailbox CPU Input Temporary Pointer of Buffer 3***/ -#define DANUBE_MBC_MBC_ITMP3 ((volatile u32*)(DANUBE_MBC+ 0x0074)) -#define DANUBE_MBC_MBC_ITMP3_ITMP - -/***Mailbox CPU Output Absolute Pointer of Buffer 0***/ -#define DANUBE_MBC_MBC_OABS0 ((volatile u32*)(DANUBE_MBC+ 0x0018)) -#define DANUBE_MBC_MBC_OABS0_OABS - -/***Mailbox CPU Output Absolute Pointer of Buffer 1***/ -#define DANUBE_MBC_MBC_OABS1 ((volatile u32*)(DANUBE_MBC+ 0x0038)) -#define DANUBE_MBC_MBC_OABS1_OABS - -/***Mailbox CPU Output Absolute Pointer of Buffer 2***/ -#define DANUBE_MBC_MBC_OABS2 ((volatile u32*)(DANUBE_MBC+ 0x0058)) -#define DANUBE_MBC_MBC_OABS2_OABS - -/***Mailbox CPU Output Absolute Pointer of Buffer 3***/ -#define DANUBE_MBC_MBC_OABS3 ((volatile u32*)(DANUBE_MBC+ 0x0078)) -#define DANUBE_MBC_MBC_OABS3_OABS - -/***Mailbox CPU Output Temporary Pointer of Buffer 0***/ -#define DANUBE_MBC_MBC_OTMP0 ((volatile u32*)(DANUBE_MBC+ 0x001C)) -#define DANUBE_MBC_MBC_OTMP0_OTMP - -/***Mailbox CPU Output Temporary Pointer of Buffer 1***/ -#define DANUBE_MBC_MBC_OTMP1 ((volatile u32*)(DANUBE_MBC+ 0x003C)) -#define DANUBE_MBC_MBC_OTMP1_OTMP - -/***Mailbox CPU Output Temporary Pointer of Buffer 2***/ -#define DANUBE_MBC_MBC_OTMP2 ((volatile u32*)(DANUBE_MBC+ 0x005C)) -#define DANUBE_MBC_MBC_OTMP2_OTMP - -/***Mailbox CPU Output Temporary Pointer of Buffer 3***/ -#define DANUBE_MBC_MBC_OTMP3 ((volatile u32*)(DANUBE_MBC+ 0x007C)) -#define DANUBE_MBC_MBC_OTMP3_OTMP - -/***DSP Control Register***/ -#define DANUBE_MBC_DCTRL ((volatile u32*)(DANUBE_MBC+ 0x00A0)) -#define DANUBE_MBC_DCTRL_BA (1 << 0) -#define DANUBE_MBC_DCTRL_BMOD (value) (((( 1 << 3) - 1) & (value)) << 1) -#define DANUBE_MBC_DCTRL_IDL (1 << 4) -#define DANUBE_MBC_DCTRL_RES (1 << 15) - -/***DSP Status Register***/ -#define DANUBE_MBC_DSTA ((volatile u32*)(DANUBE_MBC+ 0x00A4)) -#define DANUBE_MBC_DSTA_IDLE (1 << 0) -#define DANUBE_MBC_DSTA_PD (1 << 1) - -/***DSP Test 1 Register***/ -#define DANUBE_MBC_DTST1 ((volatile u32*)(DANUBE_MBC+ 0x00A8)) -#define DANUBE_MBC_DTST1_ABORT (1 << 0) -#define DANUBE_MBC_DTST1_HWF32 (1 << 1) -#define DANUBE_MBC_DTST1_HWF4M (1 << 2) -#define DANUBE_MBC_DTST1_HWFOP (1 << 3) - -/***********************************************************************/ -/* Module : MEI register address and bits */ -/***********************************************************************/ -#define MEI_SPACE_ACCESS 0xBE116000 - -/*** Register address offsets, relative to MEI_SPACE_ADDRESS ***/ -#define MEI_DATA_XFR ((volatile u32*)(0x0000 + MEI_SPACE_ACCESS)) -#define MEI_VERSION ((volatile u32*)(0x0004 + MEI_SPACE_ACCESS)) -#define MEI_ARC_GP_STAT ((volatile u32*)(0x0008 + MEI_SPACE_ACCESS)) -#define MEI_DATA_XFR_STAT ((volatile u32*)(0x000C + MEI_SPACE_ACCESS)) -#define MEI_XFR_ADDR ((volatile u32*)(0x0010 + MEI_SPACE_ACCESS)) -#define MEI_MAX_WAIT ((volatile u32*)(0x0014 + MEI_SPACE_ACCESS)) -#define MEI_TO_ARC_INT ((volatile u32*)(0x0018 + MEI_SPACE_ACCESS)) -#define ARC_TO_MEI_INT ((volatile u32*)(0x001C + MEI_SPACE_ACCESS)) -#define ARC_TO_MEI_INT_MASK ((volatile u32*)(0x0020 + MEI_SPACE_ACCESS)) -#define MEI_DEBUG_WAD ((volatile u32*)(0x0024 + MEI_SPACE_ACCESS)) -#define MEI_DEBUG_RAD ((volatile u32*)(0x0028 + MEI_SPACE_ACCESS)) -#define MEI_DEBUG_DATA ((volatile u32*)(0x002C + MEI_SPACE_ACCESS)) -#define MEI_DEBUG_DEC ((volatile u32*)(0x0030 + MEI_SPACE_ACCESS)) -#define MEI_CONFIG ((volatile u32*)(0x0034 + MEI_SPACE_ACCESS)) -#define MEI_RST_CONTROL ((volatile u32*)(0x0038 + MEI_SPACE_ACCESS)) -#define MEI_DBG_MASTER ((volatile u32*)(0x003C + MEI_SPACE_ACCESS)) -#define MEI_CLK_CONTROL ((volatile u32*)(0x0040 + MEI_SPACE_ACCESS)) -#define MEI_BIST_CONTROL ((volatile u32*)(0x0044 + MEI_SPACE_ACCESS)) -#define MEI_BIST_STAT ((volatile u32*)(0x0048 + MEI_SPACE_ACCESS)) -#define MEI_XDATA_BASE_SH ((volatile u32*)(0x004c + MEI_SPACE_ACCESS)) -#define MEI_XDATA_BASE ((volatile u32*)(0x0050 + MEI_SPACE_ACCESS)) -#define MEI_XMEM_BAR_BASE ((volatile u32*)(0x0054 + MEI_SPACE_ACCESS)) -#define MEI_XMEM_BAR0 ((volatile u32*)(0x0054 + MEI_SPACE_ACCESS)) -#define MEI_XMEM_BAR1 ((volatile u32*)(0x0058 + MEI_SPACE_ACCESS)) -#define MEI_XMEM_BAR2 ((volatile u32*)(0x005C + MEI_SPACE_ACCESS)) -#define MEI_XMEM_BAR3 ((volatile u32*)(0x0060 + MEI_SPACE_ACCESS)) -#define MEI_XMEM_BAR4 ((volatile u32*)(0x0064 + MEI_SPACE_ACCESS)) -#define MEI_XMEM_BAR5 ((volatile u32*)(0x0068 + MEI_SPACE_ACCESS)) -#define MEI_XMEM_BAR6 ((volatile u32*)(0x006C + MEI_SPACE_ACCESS))) -#define MEI_XMEM_BAR7 ((volatile u32*)(0x0070 + MEI_SPACE_ACCESS)) -#define MEI_XMEM_BAR8 ((volatile u32*)(0x0074 + MEI_SPACE_ACCESS)) -#define MEI_XMEM_BAR9 ((volatile u32*)(0x0078 + MEI_SPACE_ACCESS)) -#define MEI_XMEM_BAR10 ((volatile u32*)(0x007C + MEI_SPACE_ACCESS)) -#define MEI_XMEM_BAR11 ((volatile u32*)(0x0080 + MEI_SPACE_ACCESS)) -#define MEI_XMEM_BAR12 ((volatile u32*)(0x0084 + MEI_SPACE_ACCESS)) -#define MEI_XMEM_BAR13 ((volatile u32*)(0x0088 + MEI_SPACE_ACCESS)) -#define MEI_XMEM_BAR14 ((volatile u32*)(0x008C + MEI_SPACE_ACCESS)) -#define MEI_XMEM_BAR15 ((volatile u32*)(0x0090 + MEI_SPACE_ACCESS)) -#define MEI_XMEM_BAR16 ((volatile u32*)(0x0094 + MEI_SPACE_ACCESS)) - -/***********************************************************************/ -/* Module : SSC1 register address and bits */ -/***********************************************************************/ - -#define DANUBE_SSC1 (KSEG1+0x1e100800) -/***********************************************************************/ -/***SSC Clock Control Register***/ -#define DANUBE_SSC_CLC (0x0000) -#define DANUBE_SSC_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8) -#define DANUBE_SSC_CLC_DISS (1 << 1) -#define DANUBE_SSC_CLC_DISR (1 << 0) -/***SSC Port Input Selection Register***/ -#define DANUBE_SSC_PISEL (0x0004) -/***SSC Identification Register***/ -#define DANUBE_SSC_ID (0x0008) -/***Control Register (Programming Mode)***/ -#define DANUBE_SSC_CON (0x0010) -#define DANUBE_SSC_CON_RUEN (1 << 12) -#define DANUBE_SSC_CON_TUEN (1 << 11) -#define DANUBE_SSC_CON_AEN (1 << 10) -#define DANUBE_SSC_CON_REN (1 << 9) -#define DANUBE_SSC_CON_TEN (1 << 8) -#define DANUBE_SSC_CON_LB (1 << 7) -#define DANUBE_SSC_CON_PO (1 << 6) -#define DANUBE_SSC_CON_PH (1 << 5) -#define DANUBE_SSC_CON_HB (1 << 4) -#define DANUBE_SSC_CON_BM(value) (((( 1 << 5) - 1) & (value)) << 16) -#define DANUBE_SSC_CON_RX_OFF (1 << 1) -#define DANUBE_SSC_CON_TX_OFF (1 << 0) -/***SCC Status Register***/ -#define DANUBE_SSC_STATE (0x0014) -#define DANUBE_SSC_STATE_EN (1 << 0) -#define DANUBE_SSC_STATE_MS (1 << 1) -#define DANUBE_SSC_STATE_BSY (1 << 13) -#define DANUBE_SSC_STATE_RUE (1 << 12) -#define DANUBE_SSC_STATE_TUE (1 << 11) -#define DANUBE_SSC_STATE_AE (1 << 10) -#define DANUBE_SSC_STATE_RE (1 << 9) -#define DANUBE_SSC_STATE_TE (1 << 8) -#define DANUBE_SSC_STATE_BC(value) (((( 1 << 5) - 1) & (value)) << 16) -/***SSC Write Hardware Modified Control Register***/ -#define DANUBE_SSC_WHBSTATE ( 0x0018) -#define DANUBE_SSC_WHBSTATE_SETBE (1 << 15) -#define DANUBE_SSC_WHBSTATE_SETPE (1 << 14) -#define DANUBE_SSC_WHBSTATE_SETRE (1 << 13) -#define DANUBE_SSC_WHBSTATE_SETTE (1 << 12) -#define DANUBE_SSC_WHBSTATE_CLRBE (1 << 11) -#define DANUBE_SSC_WHBSTATE_CLRPE (1 << 10) -#define DANUBE_SSC_WHBSTATE_CLRRE (1 << 9) -#define DANUBE_SSC_WHBSTATE_CLRTE (1 << 8) -/***SSC Transmitter Buffer Register***/ -#define DANUBE_SSC_TB (0x0020) -#define DANUBE_SSC_TB_TB_VALUE(value) (((( 1 << 16) - 1) & (value)) << 0) -/***SSC Receiver Buffer Register***/ -#define DANUBE_SSC_RB (0x0024) -#define DANUBE_SSC_RB_RB_VALUE(value) (((( 1 << 16) - 1) & (value)) << 0) -/***SSC Receive FIFO Control Register***/ -#define DANUBE_SSC_RXFCON (0x0030) -#define DANUBE_SSC_RXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8) -#define DANUBE_SSC_RXFCON_RXTMEN (1 << 2) -#define DANUBE_SSC_RXFCON_RXFLU (1 << 1) -#define DANUBE_SSC_RXFCON_RXFEN (1 << 0) -/***SSC Transmit FIFO Control Register***/ -#define DANUBE_SSC_TXFCON ( 0x0034) -#define DANUBE_SSC_TXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8) -#define DANUBE_SSC_TXFCON_TXTMEN (1 << 2) -#define DANUBE_SSC_TXFCON_TXFLU (1 << 1) -#define DANUBE_SSC_TXFCON_TXFEN (1 << 0) -/***SSC FIFO Status Register***/ -#define DANUBE_SSC_FSTAT (0x0038) -#define DANUBE_SSC_FSTAT_TXFFL(value) (((( 1 << 6) - 1) & (value)) << 8) -#define DANUBE_SSC_FSTAT_RXFFL(value) (((( 1 << 6) - 1) & (value)) << 0) -/***SSC Baudrate Timer Reload Register***/ -#define DANUBE_SSC_BR (0x0040) -#define DANUBE_SSC_BR_BR_VALUE(value) (((( 1 << 16) - 1) & (value)) << 0) -#define DANUBE_SSC_BRSTAT (0x0044) -#define DANUBE_SSC_SFCON (0x0060) -#define DANUBE_SSC_SFSTAT (0x0064) -#define DANUBE_SSC_GPOCON (0x0070) -#define DANUBE_SSC_GPOSTAT (0x0074) -#define DANUBE_SSC_WHBGPOSTAT (0x0078) -#define DANUBE_SSC_RXREQ (0x0080) -#define DANUBE_SSC_RXCNT (0x0084) -/*DMA Registers in Bus Clock Domain*/ -#define DANUBE_SSC_DMA_CON (0x00EC) -/*interrupt Node Registers in Bus Clock Domain*/ -#define DANUBE_SSC_IRNEN (0x00F4) -#define DANUBE_SSC_IRNCR (0x00F8) -#define DANUBE_SSC_IRNICR (0x00FC) -#define DANUBE_SSC_IRN_FIR 0x8 -#define DANUBE_SSC_IRN_EIR 0x4 -#define DANUBE_SSC_IRN_RIR 0x2 -#define DANUBE_SSC_IRN_TIR 0x1 - -#define DANUBE_SSC1_CLC ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_CLC)) -#define DANUBE_SSC1_ID ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_ID)) -#define DANUBE_SSC1_CON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_CON)) -#define DANUBE_SSC1_STATE ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_STATE)) -#define DANUBE_SSC1_WHBSTATE ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_WHBSTATE)) -#define DANUBE_SSC1_TB ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_TB)) -#define DANUBE_SSC1_RB ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RB)) -#define DANUBE_SSC1_FSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_FSTAT)) -#define DANUBE_SSC1_PISEL ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_PISEL)) -#define DANUBE_SSC1_RXFCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXFCON)) -#define DANUBE_SSC1_TXFCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_TXFCON)) -#define DANUBE_SSC1_BR ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_BR)) -#define DANUBE_SSC1_BRSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_BRSTAT)) -#define DANUBE_SSC1_SFCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_SFCON)) -#define DANUBE_SSC1_SFSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_SFSTAT)) -#define DANUBE_SSC1_GPOCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_GPOCON)) -#define DANUBE_SSC1_GPOSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_GPOSTAT)) -#define DANUBE_SSC1_WHBGPOSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_WHBGPOSTAT)) -#define DANUBE_SSC1_RXREQ ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXREQ)) -#define DANUBE_SSC1_RXCNT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXCNT)) -#define DANUBE_SSC1_DMA_CON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_DMA_CON)) -#define DANUBE_SSC1_IRNEN ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNEN)) -#define DANUBE_SSC1_IRNICR ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNICR)) -#define DANUBE_SSC1_IRNCR ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNCR)) - -/***********************************************************************/ -/* Module : GPIO register address and bits */ -/***********************************************************************/ -#define DANUBE_GPIO (0xBE100B00) -/***Port 0 Data Output Register (0010H)***/ -#define DANUBE_GPIO_P0_OUT ((volatile u32 *)(DANUBE_GPIO+ 0x0010)) -/***Port 1 Data Output Register (0040H)***/ -#define DANUBE_GPIO_P1_OUT ((volatile u32 *)(DANUBE_GPIO+ 0x0040)) -/***Port 0 Data Input Register (0014H)***/ -#define DANUBE_GPIO_P0_IN ((volatile u32 *)(DANUBE_GPIO+ 0x0014)) -/***Port 1 Data Input Register (0044H)***/ -#define DANUBE_GPIO_P1_IN ((volatile u32 *)(DANUBE_GPIO+ 0x0044)) -/***Port 0 Direction Register (0018H)***/ -#define DANUBE_GPIO_P0_DIR ((volatile u32 *)(DANUBE_GPIO+ 0x0018)) -/***Port 1 Direction Register (0048H)***/ -#define DANUBE_GPIO_P1_DIR ((volatile u32 *)(DANUBE_GPIO+ 0x0048)) -/***Port 0 Alternate Function Select Register 0 (001C H) ***/ -#define DANUBE_GPIO_P0_ALTSEL0 ((volatile u32 *)(DANUBE_GPIO+ 0x001C)) -/***Port 1 Alternate Function Select Register 0 (004C H) ***/ -#define DANUBE_GPIO_P1_ALTSEL0 ((volatile u32 *)(DANUBE_GPIO+ 0x004C)) -/***Port 0 Alternate Function Select Register 1 (0020 H) ***/ -#define DANUBE_GPIO_P0_ALTSEL1 ((volatile u32 *)(DANUBE_GPIO+ 0x0020)) -/***Port 1 Alternate Function Select Register 0 (0050 H) ***/ -#define DANUBE_GPIO_P1_ALTSEL1 ((volatile u32 *)(DANUBE_GPIO+ 0x0050)) -/***Port 0 Open Drain Control Register (0024H)***/ -#define DANUBE_GPIO_P0_OD ((volatile u32 *)(DANUBE_GPIO+ 0x0024)) -/***Port 1 Open Drain Control Register (0054H)***/ -#define DANUBE_GPIO_P1_OD ((volatile u32 *)(DANUBE_GPIO+ 0x0054)) -/***Port 0 Input Schmitt-Trigger Off Register (0028 H) ***/ -#define DANUBE_GPIO_P0_STOFF ((volatile u32 *)(DANUBE_GPIO+ 0x0028)) -/***Port 1 Input Schmitt-Trigger Off Register (0058 H) ***/ -#define DANUBE_GPIO_P1_STOFF ((volatile u32 *)(DANUBE_GPIO+ 0x0058)) -/***Port 0 Pull Up/Pull Down Select Register (002C H)***/ -#define DANUBE_GPIO_P0_PUDSEL ((volatile u32 *)(DANUBE_GPIO+ 0x002C)) -/***Port 1 Pull Up/Pull Down Select Register (005C H)***/ -#define DANUBE_GPIO_P1_PUDSEL ((volatile u32 *)(DANUBE_GPIO+ 0x005C)) -/***Port 0 Pull Up Device Enable Register (0030 H)***/ -#define DANUBE_GPIO_P0_PUDEN ((volatile u32 *)(DANUBE_GPIO+ 0x0030)) -/***Port 1 Pull Up Device Enable Register (0060 H)***/ -#define DANUBE_GPIO_P1_PUDEN ((volatile u32 *)(DANUBE_GPIO+ 0x0060)) -/***********************************************************************/ -/* Module : CGU register address and bits */ -/***********************************************************************/ - -#define DANUBE_CGU (0xBF103000) -/***********************************************************************/ -/***CGU Clock PLL0 ***/ -#define DANUBE_CGU_PLL0_CFG ((volatile u32*)(DANUBE_CGU+ 0x0004)) -/***CGU Clock PLL1 ***/ -#define DANUBE_CGU_PLL1_CFG ((volatile u32*)(DANUBE_CGU+ 0x0008)) -/***CGU Clock SYS Mux Register***/ -#define DANUBE_CGU_SYS ((volatile u32*)(DANUBE_CGU+ 0x0010)) -/***CGU Interface Clock Control Register***/ -#define DANUBE_CGU_IFCCR ((volatile u32*)(DANUBE_CGU+ 0x0018)) -/***CGU PCI Clock Control Register**/ -#define DANUBE_CGU_PCICR ((volatile u32*)(DANUBE_CGU+ 0x0034)) -#define CLOCK_60M 60000000 -#define CLOCK_83M 83333333 -#define CLOCK_111M 111111111 -#define CLOCK_133M 133333333 -#define CLOCK_167M 166666667 -#define CLOCK_333M 333333333 - -/***********************************************************************/ -/* Module : MCD register address and bits */ -/***********************************************************************/ -#define DANUBE_MCD (KSEG1+0x1F106000) - -/***Manufacturer Identification Register***/ -#define DANUBE_MCD_MANID ((volatile u32*)(DANUBE_MCD+ 0x0024)) -#define DANUBE_MCD_MANID_MANUF(value) (((( 1 << 11) - 1) & (value)) << 5) - -/***Chip Identification Register***/ -#define DANUBE_MCD_CHIPID ((volatile u32*)(DANUBE_MCD+ 0x0028)) -#define DANUBE_MCD_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1)) -#define DANUBE_MCD_CHIPID_VERSION_SET(value) (((( 1 << 4) - 1) & (value)) << 28) -#define DANUBE_MCD_CHIPID_PART_NUMBER_GET(value) (((value) >> 12) & ((1 << 16) - 1)) -#define DANUBE_MCD_CHIPID_PART_NUMBER_SET(value) (((( 1 << 16) - 1) & (value)) << 12) -#define DANUBE_MCD_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 11) - 1)) -#define DANUBE_MCD_CHIPID_MANID_SET(value) (((( 1 << 11) - 1) & (value)) << 1) - -#define DANUBE_CHIPID_STANDARD 0x00EB -#define DANUBE_CHIPID_YANGTSE 0x00ED - -/***Redesign Tracing Identification Register***/ -#define DANUBE_MCD_RTID ((volatile u32*)(DANUBE_MCD+ 0x002C)) -#define DANUBE_MCD_RTID_LC (1 << 15) -#define DANUBE_MCD_RTID_RIX(value) (((( 1 << 3) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : EBU register address and bits */ -/***********************************************************************/ - -#define DANUBE_EBU (0xBE105300) - -/***********************************************************************/ - -/***EBU Clock Control Register***/ -#define DANUBE_EBU_CLC ((volatile u32*)(DANUBE_EBU+ 0x0000)) -#define DANUBE_EBU_CLC_DISS (1 << 1) -#define DANUBE_EBU_CLC_DISR (1 << 0) - -/***EBU Global Control Register***/ -#define DANUBE_EBU_CON ((volatile u32*)(DANUBE_EBU+ 0x0010)) -#define DANUBE_EBU_CON_DTACS (value) (((( 1 << 3) - 1) & (value)) << 20) -#define DANUBE_EBU_CON_DTARW (value) (((( 1 << 3) - 1) & (value)) << 16) -#define DANUBE_EBU_CON_TOUTC (value) (((( 1 << 8) - 1) & (value)) << 8) -#define DANUBE_EBU_CON_ARBMODE (value) (((( 1 << 2) - 1) & (value)) << 6) -#define DANUBE_EBU_CON_ARBSYNC (1 << 5) -#define DANUBE_EBU_CON_1 (1 << 3) - -/***EBU Address Select Register 0***/ -#define DANUBE_EBU_ADDSEL0 ((volatile u32*)(DANUBE_EBU+ 0x0020)) -#define DANUBE_EBU_ADDSEL0_BASE (value) (((( 1 << 20) - 1) & (value)) << 12) -#define DANUBE_EBU_ADDSEL0_MASK (value) (((( 1 << 4) - 1) & (value)) << 4) -#define DANUBE_EBU_ADDSEL0_MIRRORE (1 << 1) -#define DANUBE_EBU_ADDSEL0_REGEN (1 << 0) - -/***EBU Address Select Register 1***/ -#define DANUBE_EBU_ADDSEL1 ((volatile u32*)(DANUBE_EBU+ 0x0024)) -#define DANUBE_EBU_ADDSEL1_BASE (value) (((( 1 << 20) - 1) & (value)) << 12) -#define DANUBE_EBU_ADDSEL1_MASK (value) (((( 1 << 4) - 1) & (value)) << 4) -#define DANUBE_EBU_ADDSEL1_MIRRORE (1 << 1) -#define DANUBE_EBU_ADDSEL1_REGEN (1 << 0) - -/***EBU Address Select Register 2***/ -#define DANUBE_EBU_ADDSEL2 ((volatile u32*)(DANUBE_EBU+ 0x0028)) -#define DANUBE_EBU_ADDSEL2_BASE (value) (((( 1 << 20) - 1) & (value)) << 12) -#define DANUBE_EBU_ADDSEL2_MASK (value) (((( 1 << 4) - 1) & (value)) << 4) -#define DANUBE_EBU_ADDSEL2_MIRRORE (1 << 1) -#define DANUBE_EBU_ADDSEL2_REGEN (1 << 0) - -/***EBU Address Select Register 3***/ -#define DANUBE_EBU_ADDSEL3 ((volatile u32*)(DANUBE_EBU+ 0x0028)) -#define DANUBE_EBU_ADDSEL3_BASE (value) (((( 1 << 20) - 1) & (value)) << 12) -#define DANUBE_EBU_ADDSEL3_MASK (value) (((( 1 << 4) - 1) & (value)) << 4) -#define DANUBE_EBU_ADDSEL3_MIRRORE (1 << 1) -#define DANUBE_EBU_ADDSEL3_REGEN (1 << 0) - -/***EBU Bus Configuration Register 0***/ -#define DANUBE_EBU_BUSCON0 ((volatile u32*)(DANUBE_EBU+ 0x0060)) -#define DANUBE_EBU_BUSCON0_WRDIS (1 << 31) -#define DANUBE_EBU_BUSCON0_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29) -#define DANUBE_EBU_BUSCON0_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27) -#define DANUBE_EBU_BUSCON0_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24) -#define DANUBE_EBU_BUSCON0_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22) -#define DANUBE_EBU_BUSCON0_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20) -#define DANUBE_EBU_BUSCON0_WAITINV (1 << 19) -#define DANUBE_EBU_BUSCON0_SETUP (1 << 18) -#define DANUBE_EBU_BUSCON0_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16) -#define DANUBE_EBU_BUSCON0_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9) -#define DANUBE_EBU_BUSCON0_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6) -#define DANUBE_EBU_BUSCON0_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4) -#define DANUBE_EBU_BUSCON0_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2) -#define DANUBE_EBU_BUSCON0_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***EBU Bus Configuration Register 1***/ -#define DANUBE_EBU_BUSCON1 ((volatile u32*)(DANUBE_EBU+ 0x0064)) -#define DANUBE_EBU_BUSCON1_WRDIS (1 << 31) -#define DANUBE_EBU_BUSCON1_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29) -#define DANUBE_EBU_BUSCON1_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27) -#define DANUBE_EBU_BUSCON1_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24) -#define DANUBE_EBU_BUSCON1_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22) -#define DANUBE_EBU_BUSCON1_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20) -#define DANUBE_EBU_BUSCON1_WAITINV (1 << 19) -#define DANUBE_EBU_BUSCON1_SETUP (1 << 18) -#define DANUBE_EBU_BUSCON1_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16) -#define DANUBE_EBU_BUSCON1_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9) -#define DANUBE_EBU_BUSCON1_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6) -#define DANUBE_EBU_BUSCON1_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4) -#define DANUBE_EBU_BUSCON1_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2) -#define DANUBE_EBU_BUSCON1_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***EBU Bus Configuration Register 2***/ -#define DANUBE_EBU_BUSCON2 ((volatile u32*)(DANUBE_EBU+ 0x0068)) -#define DANUBE_EBU_BUSCON2_WRDIS (1 << 31) -#define DANUBE_EBU_BUSCON2_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29) -#define DANUBE_EBU_BUSCON2_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27) -#define DANUBE_EBU_BUSCON2_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24) -#define DANUBE_EBU_BUSCON2_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22) -#define DANUBE_EBU_BUSCON2_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20) -#define DANUBE_EBU_BUSCON2_WAITINV (1 << 19) -#define DANUBE_EBU_BUSCON2_SETUP (1 << 18) -#define DANUBE_EBU_BUSCON2_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16) -#define DANUBE_EBU_BUSCON2_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9) -#define DANUBE_EBU_BUSCON2_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6) -#define DANUBE_EBU_BUSCON2_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4) -#define DANUBE_EBU_BUSCON2_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2) -#define DANUBE_EBU_BUSCON2_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0) - -#define DANUBE_EBU_PCC_CON ((volatile u32*)(DANUBE_EBU+ 0x0090)) -#define DANUBE_EBU_PCC_STAT ((volatile u32*)(DANUBE_EBU+ 0x0094)) -#define DANUBE_EBU_PCC_ISTAT ((volatile u32*)(DANUBE_EBU+ 0x00A0)) -#define DANUBE_EBU_PCC_IEN ((volatile u32*)(DANUBE_EBU+ 0x00A4)) -/***********************************************************************/ -/* Module : SDRAM register address and bits */ -/***********************************************************************/ - -#define DANUBE_SDRAM (0xBF800000) -/***********************************************************************/ - -/***MC Access Error Cause Register***/ -#define DANUBE_SDRAM_MC_ERRCAUSE ((volatile u32*)(DANUBE_SDRAM+ 0x0100)) -#define DANUBE_SDRAM_MC_ERRCAUSE_ERR (1 << 31) -#define DANUBE_SDRAM_MC_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16) -#define DANUBE_SDRAM_MC_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0) -#define DANUBE_SDRAM_MC_ERRCAUSE_Res (value) (((( 1 << NaN) - 1) & (value)) << NaN) - -/***MC Access Error Address Register***/ -#define DANUBE_SDRAM_MC_ERRADDR ((volatile u32*)(DANUBE_SDRAM+ 0x0108)) -#define DANUBE_SDRAM_MC_ERRADDR_ADDR - -/***MC I/O General Purpose Register***/ -#define DANUBE_SDRAM_MC_IOGP ((volatile u32*)(DANUBE_SDRAM+ 0x0800)) -#define DANUBE_SDRAM_MC_IOGP_GPR6 (value) (((( 1 << 4) - 1) & (value)) << 28) -#define DANUBE_SDRAM_MC_IOGP_GPR5 (value) (((( 1 << 4) - 1) & (value)) << 24) -#define DANUBE_SDRAM_MC_IOGP_GPR4 (value) (((( 1 << 4) - 1) & (value)) << 20) -#define DANUBE_SDRAM_MC_IOGP_GPR3 (value) (((( 1 << 4) - 1) & (value)) << 16) -#define DANUBE_SDRAM_MC_IOGP_GPR2 (value) (((( 1 << 4) - 1) & (value)) << 12) -#define DANUBE_SDRAM_MC_IOGP_CPS (1 << 11) -#define DANUBE_SDRAM_MC_IOGP_CLKDELAY (value) (((( 1 << 3) - 1) & (value)) << 8) -#define DANUBE_SDRAM_MC_IOGP_CLKRAT (value) (((( 1 << 4) - 1) & (value)) << 4) -#define DANUBE_SDRAM_MC_IOGP_RDDEL (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***MC Self Refresh Register***/ -#define DANUBE_SDRAM_MC_SELFRFSH ((volatile u32*)(DANUBE_SDRAM+ 0x0A00)) -#define DANUBE_SDRAM_MC_SELFRFSH_PWDS (1 << 1) -#define DANUBE_SDRAM_MC_SELFRFSH_PWD (1 << 0) -#define DANUBE_SDRAM_MC_SELFRFSH_Res (value) (((( 1 << 30) - 1) & (value)) << 2) - -/***MC Enable Register***/ -#define DANUBE_SDRAM_MC_CTRLENA ((volatile u32*)(DANUBE_SDRAM+ 0x1000)) -#define DANUBE_SDRAM_MC_CTRLENA_ENA (1 << 0) -#define DANUBE_SDRAM_MC_CTRLENA_Res (value) (((( 1 << 31) - 1) & (value)) << 1) - -/***MC Mode Register Setup Code***/ -#define DANUBE_SDRAM_MC_MRSCODE ((volatile u32*)(DANUBE_SDRAM+ 0x1008)) -#define DANUBE_SDRAM_MC_MRSCODE_UMC (value) (((( 1 << 5) - 1) & (value)) << 7) -#define DANUBE_SDRAM_MC_MRSCODE_CL (value) (((( 1 << 3) - 1) & (value)) << 4) -#define DANUBE_SDRAM_MC_MRSCODE_WT (1 << 3) -#define DANUBE_SDRAM_MC_MRSCODE_BL (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***MC Configuration Data-word Width Register***/ -#define DANUBE_SDRAM_MC_CFGDW ((volatile u32*)(DANUBE_SDRAM+ 0x1010)) -#define DANUBE_SDRAM_MC_CFGDW_DW (value) (((( 1 << 4) - 1) & (value)) << 0) -#define DANUBE_SDRAM_MC_CFGDW_Res (value) (((( 1 << 28) - 1) & (value)) << 4) - -/***MC Configuration Physical Bank 0 Register***/ -#define DANUBE_SDRAM_MC_CFGPB0 ((volatile u32*)(DANUBE_SDRAM+ 0x1018)) -#define DANUBE_SDRAM_MC_CFGPB0_MCSEN0 (value) (((( 1 << 4) - 1) & (value)) << 12) -#define DANUBE_SDRAM_MC_CFGPB0_BANKN0 (value) (((( 1 << 4) - 1) & (value)) << 8) -#define DANUBE_SDRAM_MC_CFGPB0_ROWW0 (value) (((( 1 << 4) - 1) & (value)) << 4) -#define DANUBE_SDRAM_MC_CFGPB0_COLW0 (value) (((( 1 << 4) - 1) & (value)) << 0) -#define DANUBE_SDRAM_MC_CFGPB0_Res (value) (((( 1 << 16) - 1) & (value)) << 16) - -/***MC Latency Register***/ -#define DANUBE_SDRAM_MC_LATENCY ((volatile u32*)(DANUBE_SDRAM+ 0x1038)) -#define DANUBE_SDRAM_MC_LATENCY_TRP (value) (((( 1 << 4) - 1) & (value)) << 16) -#define DANUBE_SDRAM_MC_LATENCY_TRAS (value) (((( 1 << 4) - 1) & (value)) << 12) -#define DANUBE_SDRAM_MC_LATENCY_TRCD (value) (((( 1 << 4) - 1) & (value)) << 8) -#define DANUBE_SDRAM_MC_LATENCY_TDPL (value) (((( 1 << 4) - 1) & (value)) << 4) -#define DANUBE_SDRAM_MC_LATENCY_TDAL (value) (((( 1 << 4) - 1) & (value)) << 0) -#define DANUBE_SDRAM_MC_LATENCY_Res (value) (((( 1 << 12) - 1) & (value)) << 20) - -/***MC Refresh Cycle Time Register***/ -#define DANUBE_SDRAM_MC_TREFRESH ((volatile u32*)(DANUBE_SDRAM+ 0x1040)) -#define DANUBE_SDRAM_MC_TREFRESH_TREF (value) (((( 1 << 13) - 1) & (value)) << 0) -#define DANUBE_SDRAM_MC_TREFRESH_Res (value) (((( 1 << 19) - 1) & (value)) << 13) - -/***********************************************************************/ -/* Module : GPTC register address and bits */ -/***********************************************************************/ - -#define DANUBE_GPTC (KSEG1 + 0x1E100A00) -#define DANUBE_GPTC_CLC ((volatile u32*) (DANUBE_GPTC + 0x0000)) -#define DANUBE_GPTC_ID ((volatile u32*) (DANUBE_GPTC + 0x0008)) -#define DANUBE_GPTC_IRNEN ((volatile u32*) (DANUBE_GPTC + 0x00F4)) -#define DANUBE_GPTC_IRNICR ((volatile u32*) (DANUBE_GPTC + 0x00F8) -#define DANUBE_GPTC_IRNCR ((volatile u32*) (DANUBE_GPTC + 0x00FC)) - -#define DANUBE_GPTC_CON_1A ((volatile u32*) (DANUBE_GPTC + 0x0010)) -#define DANUBE_GPTC_RUN_1A ((volatile u32*) (DANUBE_GPTC + 0x0018)) -#define DANUBE_GPTC_RELOAD_1A ((volatile u32*) (DANUBE_GPTC + 0x0020)) -#define DANUBE_GPTC_COUNT_1A ((volatile u32*) (DANUBE_GPTC + 0x0028)) - -#define DANUBE_GPTC_CON_1B ((volatile u32*) (DANUBE_GPTC + 0x0014)) -#define DANUBE_GPTC_RUN_1B ((volatile u32*) (DANUBE_GPTC + 0x001C)) -#define DANUBE_GPTC_RELOAD_1B ((volatile u32*) (DANUBE_GPTC + 0x0024)) -#define DANUBE_GPTC_COUNT_1B ((volatile u32*) (DANUBE_GPTC + 0x002C)) - -#define DANUBE_GPTC_CON_2A ((volatile u32*) (DANUBE_GPTC + 0x0030)) -#define DANUBE_GPTC_RUN_2A ((volatile u32*) (DANUBE_GPTC + 0x0038)) -#define DANUBE_GPTC_RELOAD_2A ((volatile u32*) (DANUBE_GPTC + 0x0040)) -#define DANUBE_GPTC_COUNT_2A ((volatile u32*) (DANUBE_GPTC + 0x0048)) - -#define DANUBE_GPTC_CON_2B ((volatile u32*) (DANUBE_GPTC + 0x0034)) -#define DANUBE_GPTC_RUN_2B ((volatile u32*) (DANUBE_GPTC + 0x003C)) -#define DANUBE_GPTC_RELOAD_2B ((volatile u32*) (DANUBE_GPTC + 0x0044)) -#define DANUBE_GPTC_COUNT_2B ((volatile u32*) (DANUBE_GPTC + 0x004C)) - -/***********************************************************************/ -/* Module : GPTU register address and bits */ -/***********************************************************************/ - -#define DANUBE_GPTU (0xB8000300) -/***********************************************************************/ - -/***GPT Clock Control Register***/ -#define DANUBE_GPTU_GPT_CLC ((volatile u32*)(DANUBE_GPTU+ 0x0000)) -#define DANUBE_GPTU_GPT_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8) -#define DANUBE_GPTU_GPT_CLC_DISS (1 << 1) -#define DANUBE_GPTU_GPT_CLC_DISR (1 << 0) - -/***GPT Timer 3 Control Register***/ -#define DANUBE_GPTU_GPT_T3CON ((volatile u32*)(DANUBE_GPTU+ 0x0014)) -#define DANUBE_GPTU_GPT_T3CON_T3RDIR (1 << 15) -#define DANUBE_GPTU_GPT_T3CON_T3CHDIR (1 << 14) -#define DANUBE_GPTU_GPT_T3CON_T3EDGE (1 << 13) -#define DANUBE_GPTU_GPT_T3CON_BPS1 (value) (((( 1 << 2) - 1) & (value)) << 11) -#define DANUBE_GPTU_GPT_T3CON_T3OTL (1 << 10) -#define DANUBE_GPTU_GPT_T3CON_T3UD (1 << 7) -#define DANUBE_GPTU_GPT_T3CON_T3R (1 << 6) -#define DANUBE_GPTU_GPT_T3CON_T3M (value) (((( 1 << 3) - 1) & (value)) << 3) -#define DANUBE_GPTU_GPT_T3CON_T3I (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Write Hardware Modified Timer 3 Control Register -If set and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define DANUBE_GPTU_GPT_WHBT3CON ((volatile u32*)(DANUBE_GPTU+ 0x004C)) -#define DANUBE_GPTU_GPT_WHBT3CON_SETT3CHDIR (1 << 15) -#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3CHDIR (1 << 14) -#define DANUBE_GPTU_GPT_WHBT3CON_SETT3EDGE (1 << 13) -#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3EDGE (1 << 12) -#define DANUBE_GPTU_GPT_WHBT3CON_SETT3OTL (1 << 11) -#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3OTL (1 << 10) - -/***GPT Timer 2 Control Register***/ -#define DANUBE_GPTU_GPT_T2CON ((volatile u32*)(DANUBE_GPTU+ 0x0010)) -#define DANUBE_GPTU_GPT_T2CON_TxRDIR (1 << 15) -#define DANUBE_GPTU_GPT_T2CON_TxCHDIR (1 << 14) -#define DANUBE_GPTU_GPT_T2CON_TxEDGE (1 << 13) -#define DANUBE_GPTU_GPT_T2CON_TxIRDIS (1 << 12) -#define DANUBE_GPTU_GPT_T2CON_TxRC (1 << 9) -#define DANUBE_GPTU_GPT_T2CON_TxUD (1 << 7) -#define DANUBE_GPTU_GPT_T2CON_TxR (1 << 6) -#define DANUBE_GPTU_GPT_T2CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3) -#define DANUBE_GPTU_GPT_T2CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Timer 4 Control Register***/ -#define DANUBE_GPTU_GPT_T4CON ((volatile u32*)(DANUBE_GPTU+ 0x0018)) -#define DANUBE_GPTU_GPT_T4CON_TxRDIR (1 << 15) -#define DANUBE_GPTU_GPT_T4CON_TxCHDIR (1 << 14) -#define DANUBE_GPTU_GPT_T4CON_TxEDGE (1 << 13) -#define DANUBE_GPTU_GPT_T4CON_TxIRDIS (1 << 12) -#define DANUBE_GPTU_GPT_T4CON_TxRC (1 << 9) -#define DANUBE_GPTU_GPT_T4CON_TxUD (1 << 7) -#define DANUBE_GPTU_GPT_T4CON_TxR (1 << 6) -#define DANUBE_GPTU_GPT_T4CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3) -#define DANUBE_GPTU_GPT_T4CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Write HW Modified Timer 2 Control Register If set - and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define DANUBE_GPTU_GPT_WHBT2CON ((volatile u32*)(DANUBE_GPTU+ 0x0048)) -#define DANUBE_GPTU_GPT_WHBT2CON_SETTxCHDIR (1 << 15) -#define DANUBE_GPTU_GPT_WHBT2CON_CLRTxCHDIR (1 << 14) -#define DANUBE_GPTU_GPT_WHBT2CON_SETTxEDGE (1 << 13) -#define DANUBE_GPTU_GPT_WHBT2CON_CLRTxEDGE (1 << 12) - -/***GPT Write HW Modified Timer 4 Control Register If set - and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define DANUBE_GPTU_GPT_WHBT4CON ((volatile u32*)(DANUBE_GPTU+ 0x0050)) -#define DANUBE_GPTU_GPT_WHBT4CON_SETTxCHDIR (1 << 15) -#define DANUBE_GPTU_GPT_WHBT4CON_CLRTxCHDIR (1 << 14) -#define DANUBE_GPTU_GPT_WHBT4CON_SETTxEDGE (1 << 13) -#define DANUBE_GPTU_GPT_WHBT4CON_CLRTxEDGE (1 << 12) - -/***GPT Capture Reload Register***/ -#define DANUBE_GPTU_GPT_CAPREL ((volatile u32*)(DANUBE_GPTU+ 0x0030)) -#define DANUBE_GPTU_GPT_CAPREL_CAPREL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 2 Register***/ -#define DANUBE_GPTU_GPT_T2 ((volatile u32*)(DANUBE_GPTU+ 0x0034)) -#define DANUBE_GPTU_GPT_T2_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 3 Register***/ -#define DANUBE_GPTU_GPT_T3 ((volatile u32*)(DANUBE_GPTU+ 0x0038)) -#define DANUBE_GPTU_GPT_T3_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 4 Register***/ -#define DANUBE_GPTU_GPT_T4 ((volatile u32*)(DANUBE_GPTU+ 0x003C)) -#define DANUBE_GPTU_GPT_T4_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 5 Register***/ -#define DANUBE_GPTU_GPT_T5 ((volatile u32*)(DANUBE_GPTU+ 0x0040)) -#define DANUBE_GPTU_GPT_T5_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 6 Register***/ -#define DANUBE_GPTU_GPT_T6 ((volatile u32*)(DANUBE_GPTU+ 0x0044)) -#define DANUBE_GPTU_GPT_T6_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 6 Control Register***/ -#define DANUBE_GPTU_GPT_T6CON ((volatile u32*)(DANUBE_GPTU+ 0x0020)) -#define DANUBE_GPTU_GPT_T6CON_T6SR (1 << 15) -#define DANUBE_GPTU_GPT_T6CON_T6CLR (1 << 14) -#define DANUBE_GPTU_GPT_T6CON_BPS2 (value) (((( 1 << 2) - 1) & (value)) << 11) -#define DANUBE_GPTU_GPT_T6CON_T6OTL (1 << 10) -#define DANUBE_GPTU_GPT_T6CON_T6UD (1 << 7) -#define DANUBE_GPTU_GPT_T6CON_T6R (1 << 6) -#define DANUBE_GPTU_GPT_T6CON_T6M (value) (((( 1 << 3) - 1) & (value)) << 3) -#define DANUBE_GPTU_GPT_T6CON_T6I (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Write HW Modified Timer 6 Control Register If set - and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define DANUBE_GPTU_GPT_WHBT6CON ((volatile u32*)(DANUBE_GPTU+ 0x0054)) -#define DANUBE_GPTU_GPT_WHBT6CON_SETT6OTL (1 << 11) -#define DANUBE_GPTU_GPT_WHBT6CON_CLRT6OTL (1 << 10) - -/***GPT Timer 5 Control Register***/ -#define DANUBE_GPTU_GPT_T5CON ((volatile u32*)(DANUBE_GPTU+ 0x001C)) -#define DANUBE_GPTU_GPT_T5CON_T5SC (1 << 15) -#define DANUBE_GPTU_GPT_T5CON_T5CLR (1 << 14) -#define DANUBE_GPTU_GPT_T5CON_CI (value) (((( 1 << 2) - 1) & (value)) << 12) -#define DANUBE_GPTU_GPT_T5CON_T5CC (1 << 11) -#define DANUBE_GPTU_GPT_T5CON_CT3 (1 << 10) -#define DANUBE_GPTU_GPT_T5CON_T5RC (1 << 9) -#define DANUBE_GPTU_GPT_T5CON_T5UDE (1 << 8) -#define DANUBE_GPTU_GPT_T5CON_T5UD (1 << 7) -#define DANUBE_GPTU_GPT_T5CON_T5R (1 << 6) -#define DANUBE_GPTU_GPT_T5CON_T5M (value) (((( 1 << 3) - 1) & (value)) << 3) -#define DANUBE_GPTU_GPT_T5CON_T5I (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : IOM register address and bits */ -/***********************************************************************/ - -#define DANUBE_IOM (0xBF105000) -/***********************************************************************/ - -/***Receive FIFO***/ -#define DANUBE_IOM_RFIFO ((volatile u32*)(DANUBE_IOM+ 0x0000)) -#define DANUBE_IOM_RFIFO_RXD (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Transmit FIFO***/ -#define DANUBE_IOM_XFIFO ((volatile u32*)(DANUBE_IOM+ 0x0000)) -#define DANUBE_IOM_XFIFO_TXD (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Interrupt Status Register HDLC***/ -#define DANUBE_IOM_ISTAH ((volatile u32*)(DANUBE_IOM+ 0x0080)) -#define DANUBE_IOM_ISTAH_RME (1 << 7) -#define DANUBE_IOM_ISTAH_RPF (1 << 6) -#define DANUBE_IOM_ISTAH_RFO (1 << 5) -#define DANUBE_IOM_ISTAH_XPR (1 << 4) -#define DANUBE_IOM_ISTAH_XMR (1 << 3) -#define DANUBE_IOM_ISTAH_XDU (1 << 2) - -/***Interrupt Mask Register HDLC***/ -#define DANUBE_IOM_MASKH ((volatile u32*)(DANUBE_IOM+ 0x0080)) -#define DANUBE_IOM_MASKH_RME (1 << 7) -#define DANUBE_IOM_MASKH_RPF (1 << 6) -#define DANUBE_IOM_MASKH_RFO (1 << 5) -#define DANUBE_IOM_MASKH_XPR (1 << 4) -#define DANUBE_IOM_MASKH_XMR (1 << 3) -#define DANUBE_IOM_MASKH_XDU (1 << 2) - -/***Status Register***/ -#define DANUBE_IOM_STAR ((volatile u32*)(DANUBE_IOM+ 0x0084)) -#define DANUBE_IOM_STAR_XDOV (1 << 7) -#define DANUBE_IOM_STAR_XFW (1 << 6) -#define DANUBE_IOM_STAR_RACI (1 << 3) -#define DANUBE_IOM_STAR_XACI (1 << 1) - -/***Command Register***/ -#define DANUBE_IOM_CMDR ((volatile u32*)(DANUBE_IOM+ 0x0084)) -#define DANUBE_IOM_CMDR_RMC (1 << 7) -#define DANUBE_IOM_CMDR_RRES (1 << 6) -#define DANUBE_IOM_CMDR_XTF (1 << 3) -#define DANUBE_IOM_CMDR_XME (1 << 1) -#define DANUBE_IOM_CMDR_XRES (1 << 0) - -/***Mode Register***/ -#define DANUBE_IOM_MODEH ((volatile u32*)(DANUBE_IOM+ 0x0088)) -#define DANUBE_IOM_MODEH_MDS2 (1 << 7) -#define DANUBE_IOM_MODEH_MDS1 (1 << 6) -#define DANUBE_IOM_MODEH_MDS0 (1 << 5) -#define DANUBE_IOM_MODEH_RAC (1 << 3) -#define DANUBE_IOM_MODEH_DIM2 (1 << 2) -#define DANUBE_IOM_MODEH_DIM1 (1 << 1) -#define DANUBE_IOM_MODEH_DIM0 (1 << 0) - -/***Extended Mode Register***/ -#define DANUBE_IOM_EXMR ((volatile u32*)(DANUBE_IOM+ 0x008C)) -#define DANUBE_IOM_EXMR_XFBS (1 << 7) -#define DANUBE_IOM_EXMR_RFBS (value) (((( 1 << 2) - 1) & (value)) << 5) -#define DANUBE_IOM_EXMR_SRA (1 << 4) -#define DANUBE_IOM_EXMR_XCRC (1 << 3) -#define DANUBE_IOM_EXMR_RCRC (1 << 2) -#define DANUBE_IOM_EXMR_ITF (1 << 0) - -/***SAPI1 Register***/ -#define DANUBE_IOM_SAP1 ((volatile u32*)(DANUBE_IOM+ 0x0094)) -#define DANUBE_IOM_SAP1_SAPI1 (value) (((( 1 << 6) - 1) & (value)) << 2) -#define DANUBE_IOM_SAP1_MHA (1 << 0) - -/***Receive Frame Byte Count Low***/ -#define DANUBE_IOM_RBCL ((volatile u32*)(DANUBE_IOM+ 0x0098)) -#define DANUBE_IOM_RBCL_RBC(value) (1 << value) - -/***SAPI2 Register***/ -#define DANUBE_IOM_SAP2 ((volatile u32*)(DANUBE_IOM+ 0x0098)) -#define DANUBE_IOM_SAP2_SAPI2 (value) (((( 1 << 6) - 1) & (value)) << 2) -#define DANUBE_IOM_SAP2_MLA (1 << 0) - -/***Receive Frame Byte Count High***/ -#define DANUBE_IOM_RBCH ((volatile u32*)(DANUBE_IOM+ 0x009C)) -#define DANUBE_IOM_RBCH_OV (1 << 4) -#define DANUBE_IOM_RBCH_RBC11 (1 << 3) -#define DANUBE_IOM_RBCH_RBC10 (1 << 2) -#define DANUBE_IOM_RBCH_RBC9 (1 << 1) -#define DANUBE_IOM_RBCH_RBC8 (1 << 0) - -/***TEI1 Register 1***/ -#define DANUBE_IOM_TEI1 ((volatile u32*)(DANUBE_IOM+ 0x009C)) -#define DANUBE_IOM_TEI1_TEI1 (value) (((( 1 << 7) - 1) & (value)) << 1) -#define DANUBE_IOM_TEI1_EA (1 << 0) - -/***Receive Status Register***/ -#define DANUBE_IOM_RSTA ((volatile u32*)(DANUBE_IOM+ 0x00A0)) -#define DANUBE_IOM_RSTA_VFR (1 << 7) -#define DANUBE_IOM_RSTA_RDO (1 << 6) -#define DANUBE_IOM_RSTA_CRC (1 << 5) -#define DANUBE_IOM_RSTA_RAB (1 << 4) -#define DANUBE_IOM_RSTA_SA1 (1 << 3) -#define DANUBE_IOM_RSTA_SA0 (1 << 2) -#define DANUBE_IOM_RSTA_TA (1 << 0) -#define DANUBE_IOM_RSTA_CR (1 << 1) - -/***TEI2 Register***/ -#define DANUBE_IOM_TEI2 ((volatile u32*)(DANUBE_IOM+ 0x00A0)) -#define DANUBE_IOM_TEI2_TEI2 (value) (((( 1 << 7) - 1) & (value)) << 1) -#define DANUBE_IOM_TEI2_EA (1 << 0) - -/***Test Mode Register HDLC***/ -#define DANUBE_IOM_TMH ((volatile u32*)(DANUBE_IOM+ 0x00A4)) -#define DANUBE_IOM_TMH_TLP (1 << 0) - -/***Command/Indication Receive 0***/ -#define DANUBE_IOM_CIR0 ((volatile u32*)(DANUBE_IOM+ 0x00B8)) -#define DANUBE_IOM_CIR0_CODR0 (value) (((( 1 << 4) - 1) & (value)) << 4) -#define DANUBE_IOM_CIR0_CIC0 (1 << 3) -#define DANUBE_IOM_CIR0_CIC1 (1 << 2) -#define DANUBE_IOM_CIR0_SG (1 << 1) -#define DANUBE_IOM_CIR0_BAS (1 << 0) - -/***Command/Indication Transmit 0***/ -#define DANUBE_IOM_CIX0 ((volatile u32*)(DANUBE_IOM+ 0x00B8)) -#define DANUBE_IOM_CIX0_CODX0 (value) (((( 1 << 4) - 1) & (value)) << 4) -#define DANUBE_IOM_CIX0_TBA2 (1 << 3) -#define DANUBE_IOM_CIX0_TBA1 (1 << 2) -#define DANUBE_IOM_CIX0_TBA0 (1 << 1) -#define DANUBE_IOM_CIX0_BAC (1 << 0) - -/***Command/Indication Receive 1***/ -#define DANUBE_IOM_CIR1 ((volatile u32*)(DANUBE_IOM+ 0x00BC)) -#define DANUBE_IOM_CIR1_CODR1 (value) (((( 1 << 6) - 1) & (value)) << 2) - -/***Command/Indication Transmit 1***/ -#define DANUBE_IOM_CIX1 ((volatile u32*)(DANUBE_IOM+ 0x00BC)) -#define DANUBE_IOM_CIX1_CODX1 (value) (((( 1 << 6) - 1) & (value)) << 2) -#define DANUBE_IOM_CIX1_CICW (1 << 1) -#define DANUBE_IOM_CIX1_CI1E (1 << 0) - -/***Controller Data Access Reg. (CH10)***/ -#define DANUBE_IOM_CDA10 ((volatile u32*)(DANUBE_IOM+ 0x0100)) -#define DANUBE_IOM_CDA10_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Controller Data Access Reg. (CH11)***/ -#define DANUBE_IOM_CDA11 ((volatile u32*)(DANUBE_IOM+ 0x0104)) -#define DANUBE_IOM_CDA11_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Controller Data Access Reg. (CH20)***/ -#define DANUBE_IOM_CDA20 ((volatile u32*)(DANUBE_IOM+ 0x0108)) -#define DANUBE_IOM_CDA20_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Controller Data Access Reg. (CH21)***/ -#define DANUBE_IOM_CDA21 ((volatile u32*)(DANUBE_IOM+ 0x010C)) -#define DANUBE_IOM_CDA21_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH10)***/ -#define DANUBE_IOM_CDA_TSDP10 ((volatile u32*)(DANUBE_IOM+ 0x0110)) -#define DANUBE_IOM_CDA_TSDP10_DPS (1 << 7) -#define DANUBE_IOM_CDA_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH11)***/ -#define DANUBE_IOM_CDA_TSDP11 ((volatile u32*)(DANUBE_IOM+ 0x0114)) -#define DANUBE_IOM_CDA_TSDP11_DPS (1 << 7) -#define DANUBE_IOM_CDA_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH20)***/ -#define DANUBE_IOM_CDA_TSDP20 ((volatile u32*)(DANUBE_IOM+ 0x0118)) -#define DANUBE_IOM_CDA_TSDP20_DPS (1 << 7) -#define DANUBE_IOM_CDA_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH21)***/ -#define DANUBE_IOM_CDA_TSDP21 ((volatile u32*)(DANUBE_IOM+ 0x011C)) -#define DANUBE_IOM_CDA_TSDP21_DPS (1 << 7) -#define DANUBE_IOM_CDA_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH10)***/ -#define DANUBE_IOM_CO_TSDP10 ((volatile u32*)(DANUBE_IOM+ 0x0120)) -#define DANUBE_IOM_CO_TSDP10_DPS (1 << 7) -#define DANUBE_IOM_CO_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH11)***/ -#define DANUBE_IOM_CO_TSDP11 ((volatile u32*)(DANUBE_IOM+ 0x0124)) -#define DANUBE_IOM_CO_TSDP11_DPS (1 << 7) -#define DANUBE_IOM_CO_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH20)***/ -#define DANUBE_IOM_CO_TSDP20 ((volatile u32*)(DANUBE_IOM+ 0x0128)) -#define DANUBE_IOM_CO_TSDP20_DPS (1 << 7) -#define DANUBE_IOM_CO_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH21)***/ -#define DANUBE_IOM_CO_TSDP21 ((volatile u32*)(DANUBE_IOM+ 0x012C)) -#define DANUBE_IOM_CO_TSDP21_DPS (1 << 7) -#define DANUBE_IOM_CO_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Ctrl. Reg. Contr. Data Access CH1x***/ -#define DANUBE_IOM_CDA1_CR ((volatile u32*)(DANUBE_IOM+ 0x0138)) -#define DANUBE_IOM_CDA1_CR_EN_TBM (1 << 5) -#define DANUBE_IOM_CDA1_CR_EN_I1 (1 << 4) -#define DANUBE_IOM_CDA1_CR_EN_I0 (1 << 3) -#define DANUBE_IOM_CDA1_CR_EN_O1 (1 << 2) -#define DANUBE_IOM_CDA1_CR_EN_O0 (1 << 1) -#define DANUBE_IOM_CDA1_CR_SWAP (1 << 0) - -/***Ctrl. Reg. Contr. Data Access CH1x***/ -#define DANUBE_IOM_CDA2_CR ((volatile u32*)(DANUBE_IOM+ 0x013C)) -#define DANUBE_IOM_CDA2_CR_EN_TBM (1 << 5) -#define DANUBE_IOM_CDA2_CR_EN_I1 (1 << 4) -#define DANUBE_IOM_CDA2_CR_EN_I0 (1 << 3) -#define DANUBE_IOM_CDA2_CR_EN_O1 (1 << 2) -#define DANUBE_IOM_CDA2_CR_EN_O0 (1 << 1) -#define DANUBE_IOM_CDA2_CR_SWAP (1 << 0) - -/***Control Register B-Channel Data***/ -#define DANUBE_IOM_BCHA_CR ((volatile u32*)(DANUBE_IOM+ 0x0144)) -#define DANUBE_IOM_BCHA_CR_EN_BC2 (1 << 4) -#define DANUBE_IOM_BCHA_CR_EN_BC1 (1 << 3) - -/***Control Register B-Channel Data***/ -#define DANUBE_IOM_BCHB_CR ((volatile u32*)(DANUBE_IOM+ 0x0148)) -#define DANUBE_IOM_BCHB_CR_EN_BC2 (1 << 4) -#define DANUBE_IOM_BCHB_CR_EN_BC1 (1 << 3) - -/***Control Reg. for HDLC and CI1 Data***/ -#define DANUBE_IOM_DCI_CR ((volatile u32*)(DANUBE_IOM+ 0x014C)) -#define DANUBE_IOM_DCI_CR_DPS_CI1 (1 << 7) -#define DANUBE_IOM_DCI_CR_EN_CI1 (1 << 6) -#define DANUBE_IOM_DCI_CR_EN_D (1 << 5) - -/***Control Reg. for HDLC and CI1 Data***/ -#define DANUBE_IOM_DCIC_CR ((volatile u32*)(DANUBE_IOM+ 0x014C)) -#define DANUBE_IOM_DCIC_CR_DPS_CI0 (1 << 7) -#define DANUBE_IOM_DCIC_CR_EN_CI0 (1 << 6) -#define DANUBE_IOM_DCIC_CR_DPS_D (1 << 5) - -/***Control Reg. Serial Data Strobe x***/ -#define DANUBE_IOM_SDS_CR ((volatile u32*)(DANUBE_IOM+ 0x0154)) -#define DANUBE_IOM_SDS_CR_ENS_TSS (1 << 7) -#define DANUBE_IOM_SDS_CR_ENS_TSS_1 (1 << 6) -#define DANUBE_IOM_SDS_CR_ENS_TSS_3 (1 << 5) -#define DANUBE_IOM_SDS_CR_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Control Register IOM Data***/ -#define DANUBE_IOM_IOM_CR ((volatile u32*)(DANUBE_IOM+ 0x015C)) -#define DANUBE_IOM_IOM_CR_SPU (1 << 7) -#define DANUBE_IOM_IOM_CR_CI_CS (1 << 5) -#define DANUBE_IOM_IOM_CR_TIC_DIS (1 << 4) -#define DANUBE_IOM_IOM_CR_EN_BCL (1 << 3) -#define DANUBE_IOM_IOM_CR_CLKM (1 << 2) -#define DANUBE_IOM_IOM_CR_Res (1 << 1) -#define DANUBE_IOM_IOM_CR_DIS_IOM (1 << 0) - -/***Synchronous Transfer Interrupt***/ -#define DANUBE_IOM_STI ((volatile u32*)(DANUBE_IOM+ 0x0160)) -#define DANUBE_IOM_STI_STOV21 (1 << 7) -#define DANUBE_IOM_STI_STOV20 (1 << 6) -#define DANUBE_IOM_STI_STOV11 (1 << 5) -#define DANUBE_IOM_STI_STOV10 (1 << 4) -#define DANUBE_IOM_STI_STI21 (1 << 3) -#define DANUBE_IOM_STI_STI20 (1 << 2) -#define DANUBE_IOM_STI_STI11 (1 << 1) -#define DANUBE_IOM_STI_STI10 (1 << 0) - -/***Acknowledge Synchronous Transfer Interrupt***/ -#define DANUBE_IOM_ASTI ((volatile u32*)(DANUBE_IOM+ 0x0160)) -#define DANUBE_IOM_ASTI_ACK21 (1 << 3) -#define DANUBE_IOM_ASTI_ACK20 (1 << 2) -#define DANUBE_IOM_ASTI_ACK11 (1 << 1) -#define DANUBE_IOM_ASTI_ACK10 (1 << 0) - -/***Mask Synchronous Transfer Interrupt***/ -#define DANUBE_IOM_MSTI ((volatile u32*)(DANUBE_IOM+ 0x0164)) -#define DANUBE_IOM_MSTI_STOV21 (1 << 7) -#define DANUBE_IOM_MSTI_STOV20 (1 << 6) -#define DANUBE_IOM_MSTI_STOV11 (1 << 5) -#define DANUBE_IOM_MSTI_STOV10 (1 << 4) -#define DANUBE_IOM_MSTI_STI21 (1 << 3) -#define DANUBE_IOM_MSTI_STI20 (1 << 2) -#define DANUBE_IOM_MSTI_STI11 (1 << 1) -#define DANUBE_IOM_MSTI_STI10 (1 << 0) - -/***Configuration Register for Serial Data Strobes***/ -#define DANUBE_IOM_SDS_CONF ((volatile u32*)(DANUBE_IOM+ 0x0168)) -#define DANUBE_IOM_SDS_CONF_SDS_BCL (1 << 0) - -/***Monitoring CDA Bits***/ -#define DANUBE_IOM_MCDA ((volatile u32*)(DANUBE_IOM+ 0x016C)) -#define DANUBE_IOM_MCDA_MCDA21 (value) (((( 1 << 2) - 1) & (value)) << 6) -#define DANUBE_IOM_MCDA_MCDA20 (value) (((( 1 << 2) - 1) & (value)) << 4) -#define DANUBE_IOM_MCDA_MCDA11 (value) (((( 1 << 2) - 1) & (value)) << 2) -#define DANUBE_IOM_MCDA_MCDA10 (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : ASC0 register address and bits */ -/***********************************************************************/ -#define DANUBE_ASC0 (KSEG1+0x1E100400) -/***********************************************************************/ -#define DANUBE_ASC0_TBUF ((volatile u32*)(DANUBE_ASC0 + 0x0020)) -#define DANUBE_ASC0_RBUF ((volatile u32*)(DANUBE_ASC0 + 0x0024)) -#define DANUBE_ASC0_FSTAT ((volatile u32*)(DANUBE_ASC0 + 0x0048)) -#define DANUBE_ASC0_FSTAT_TXFREE_GET(value) (((value) >> 24) & ((1 << 6) - 1)) -#define DANUBE_ASC0_FSTAT_TXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 24) -#define DANUBE_ASC0_FSTAT_RXFREE_GET(value) (((value) >> 16) & ((1 << 6) - 1)) -#define DANUBE_ASC0_FSTAT_RXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 16) -#define DANUBE_ASC0_FSTAT_TXFFL_GET(value) (((value) >> 8) & ((1 << 6) - 1)) -#define DANUBE_ASC0_FSTAT_TXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 8) -#define DANUBE_ASC0_FSTAT_RXFFL_GET(value) (((value) >> 0) & ((1 << 6) - 1)) -#define DANUBE_ASC0_FSTAT_RXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : ASC1 register address and bits */ -/***********************************************************************/ - -#define DANUBE_ASC1 (KSEG1+0x1E100C00) -/***********************************************************************/ -/***ASC Clock Control Register***/ -#define DANUBE_ASC1_CLC ((volatile u32*)(DANUBE_ASC1+ 0x0000)) -#define DANUBE_ASC1_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8) -#define DANUBE_ASC1_CLC_DISS (1 << 1) -#define DANUBE_ASC1_CLC_DISR (1 << 0) - -/***ASC Port Input Select Register***/ -#define DANUBE_ASC1_PISEL ((volatile u32*)(DANUBE_ASC1+ 0x0004)) -#define DANUBE_ASC1_PISEL ((volatile u32*)(DANUBE_ASC1+ 0x0004)) -#define DANUBE_ASC1_PISEL_RIS (1 << 0) - -/***ASC Control Register***/ -#define DANUBE_ASC1_CON ((volatile u32*)(DANUBE_ASC1+ 0x0010)) -#define DANUBE_ASC1_CON_BEN (1 << 20) -#define DANUBE_ASC1_CON_TOEN (1 << 20) -#define DANUBE_ASC1_CON_ROEN (1 << 19) -#define DANUBE_ASC1_CON_RUEN (1 << 18) -#define DANUBE_ASC1_CON_FEN (1 << 17) -#define DANUBE_ASC1_CON_PAL (1 << 16) -#define DANUBE_ASC1_CON_R (1 << 15) -#define DANUBE_ASC1_CON_ACO (1 << 14) -#define DANUBE_ASC1_CON_LB (1 << 13) -#define DANUBE_ASC1_CON_ERCLK (1 << 10) -#define DANUBE_ASC1_CON_FDE (1 << 9) -#define DANUBE_ASC1_CON_BRS (1 << 8) -#define DANUBE_ASC1_CON_STP (1 << 7) -#define DANUBE_ASC1_CON_SP (1 << 6) -#define DANUBE_ASC1_CON_ODD (1 << 5) -#define DANUBE_ASC1_CON_PEN (1 << 4) -#define DANUBE_ASC1_CON_M(value) (((( 1 << 3) - 1) & (value)) << 0) - -/***ASC Staus Register***/ -#define DANUBE_ASC1_STATE ((volatile u32*)(DANUBE_ASC1+ 0x0014)) -/***ASC Write Hardware Modified Control Register***/ -#define DANUBE_ASC1_WHBSTATE ((volatile u32*)(DANUBE_ASC1+ 0x0018)) -#define DANUBE_ASC1_WHBSTATE_SETBE (1 << 113) -#define DANUBE_ASC1_WHBSTATE_SETTOE (1 << 12) -#define DANUBE_ASC1_WHBSTATE_SETROE (1 << 11) -#define DANUBE_ASC1_WHBSTATE_SETRUE (1 << 10) -#define DANUBE_ASC1_WHBSTATE_SETFE (1 << 19) -#define DANUBE_ASC1_WHBSTATE_SETPE (1 << 18) -#define DANUBE_ASC1_WHBSTATE_CLRBE (1 << 17) -#define DANUBE_ASC1_WHBSTATE_CLRTOE (1 << 6) -#define DANUBE_ASC1_WHBSTATE_CLRROE (1 << 5) -#define DANUBE_ASC1_WHBSTATE_CLRRUE (1 << 4) -#define DANUBE_ASC1_WHBSTATE_CLRFE (1 << 3) -#define DANUBE_ASC1_WHBSTATE_CLRPE (1 << 2) -#define DANUBE_ASC1_WHBSTATE_SETREN (1 << 1) -#define DANUBE_ASC1_WHBSTATE_CLRREN (1 << 0) - -/***ASC Baudrate Timer/Reload Register***/ -#define DANUBE_ASC1_BG ((volatile u32*)(DANUBE_ASC1+ 0x0050)) -#define DANUBE_ASC1_BG_BR_VALUE(value) (((( 1 << 13) - 1) & (value)) << 0) - -/***ASC Fractional Divider Register***/ -#define DANUBE_ASC1_FDV ((volatile u32*)(DANUBE_ASC1+ 0x0018)) -#define DANUBE_ASC1_FDV_FD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0) - -/***ASC Transmit Buffer Register***/ -#define DANUBE_ASC1_TBUF ((volatile u32*)(DANUBE_ASC1+ 0x0020)) -#define DANUBE_ASC1_TBUF_TD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0) - -/***ASC Receive Buffer Register***/ -#define DANUBE_ASC1_RBUF ((volatile u32*)(DANUBE_ASC1+ 0x0024)) -#define DANUBE_ASC1_RBUF_RD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0) - -/***ASC Autobaud Control Register***/ -#define DANUBE_ASC1_ABCON ((volatile u32*)(DANUBE_ASC1+ 0x0030)) -#define DANUBE_ASC1_ABCON_RXINV (1 << 11) -#define DANUBE_ASC1_ABCON_TXINV (1 << 10) -#define DANUBE_ASC1_ABCON_ABEM(value) (((( 1 << 2) - 1) & (value)) << 8) -#define DANUBE_ASC1_ABCON_FCDETEN (1 << 4) -#define DANUBE_ASC1_ABCON_ABDETEN (1 << 3) -#define DANUBE_ASC1_ABCON_ABSTEN (1 << 2) -#define DANUBE_ASC1_ABCON_AUREN (1 << 1) -#define DANUBE_ASC1_ABCON_ABEN (1 << 0) - -/***Receive FIFO Control Register***/ -#define DANUBE_ASC1_RXFCON ((volatile u32*)(DANUBE_ASC1+ 0x0040)) -#define DANUBE_ASC1_RXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8) -#define DANUBE_ASC1_RXFCON_RXFFLU (1 << 1) -#define DANUBE_ASC1_RXFCON_RXFEN (1 << 0) - -/***Transmit FIFO Control Register***/ -#define DANUBE_ASC1_TXFCON ((volatile u32*)(DANUBE_ASC1+ 0x0044)) -#define DANUBE_ASC1_TXFCON_TXFITL(value) (((( 1 << 6) - 1) & (value)) << 8) -#define DANUBE_ASC1_TXFCON_TXFFLU (1 << 1) -#define DANUBE_ASC1_TXFCON_TXFEN (1 << 0) - -/***FIFO Status Register***/ -#define DANUBE_ASC1_FSTAT ((volatile u32*)(DANUBE_ASC1+ 0x0048)) -#define DANUBE_ASC1_FSTAT_TXFFL(value) (((( 1 << 6) - 1) & (value)) << 8) -#define DANUBE_ASC1_FSTAT_RXFFL(value) (((( 1 << 6) - 1) & (value)) << 0) -#define DANUBE_ASC1_FSTAT_TXFREE_GET(value) (((value) >> 24) & ((1 << 6) - 1)) -#define DANUBE_ASC1_FSTAT_TXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 24) -#define DANUBE_ASC1_FSTAT_RXFREE_GET(value) (((value) >> 16) & ((1 << 6) - 1)) -#define DANUBE_ASC1_FSTAT_RXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 16) -#define DANUBE_ASC1_FSTAT_TXFFL_GET(value) (((value) >> 8) & ((1 << 6) - 1)) -#define DANUBE_ASC1_FSTAT_TXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 8) -#define DANUBE_ASC1_FSTAT_RXFFL_GET(value) (((value) >> 0) & ((1 << 6) - 1)) -#define DANUBE_ASC1_FSTAT_RXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 0) - -/***ASC Autobaud Status Register***/ -#define DANUBE_ASC1_ABSTAT ((volatile u32*)(DANUBE_ASC1+ 0x0034)) -#define DANUBE_ASC1_ABSTAT_DETWAIT (1 << 4) -#define DANUBE_ASC1_ABSTAT_SCCDET (1 << 3) -#define DANUBE_ASC1_ABSTAT_SCSDET (1 << 2) -#define DANUBE_ASC1_ABSTAT_FCCDET (1 << 1) -#define DANUBE_ASC1_ABSTAT_FCSDET (1 << 0) - -/***ASC Write HW Modified Autobaud Status Register***/ -#define DANUBE_ASC1_WHBABSTAT ((volatile u32*)(DANUBE_ASC1+ 0x003C)) -#define DANUBE_ASC1_WHBABSTAT_SETDETWAIT (1 << 9) -#define DANUBE_ASC1_WHBABSTAT_CLRDETWAIT (1 << 8) -#define DANUBE_ASC1_WHBABSTAT_SETSCCDET (1 << 7) -#define DANUBE_ASC1_WHBABSTAT_CLRSCCDET (1 << 6) -#define DANUBE_ASC1_WHBABSTAT_SETSCSDET (1 << 5) -#define DANUBE_ASC1_WHBABSTAT_CLRSCSDET (1 << 4) -#define DANUBE_ASC1_WHBABSTAT_SETFCCDET (1 << 3) -#define DANUBE_ASC1_WHBABSTAT_CLRFCCDET (1 << 2) -#define DANUBE_ASC1_WHBABSTAT_SETFCSDET (1 << 1) -#define DANUBE_ASC1_WHBABSTAT_CLRFCSDET (1 << 0) - -/***ASC IRNCR0 **/ -#define DANUBE_ASC1_IRNREN ((volatile u32*)(DANUBE_ASC1+ 0x00F4)) -#define DANUBE_ASC1_IRNICR ((volatile u32*)(DANUBE_ASC1+ 0x00FC)) -/***ASC IRNCR1 **/ -#define DANUBE_ASC1_IRNCR ((volatile u32*)(DANUBE_ASC1+ 0x00F8)) -#define ASC_IRNCR_TIR 0x4 -#define ASC_IRNCR_RIR 0x2 -#define ASC_IRNCR_EIR 0x4 - -/***********************************************************************/ -/* Module : DMA register address and bits */ -/***********************************************************************/ - -#define DANUBE_DMA (0xBE104100) -/***********************************************************************/ - -#define DANUBE_DMA_BASE DANUBE_DMA -#define DANUBE_DMA_CLC (volatile u32*)DANUBE_DMA_BASE -#define DANUBE_DMA_ID (volatile u32*)(DANUBE_DMA_BASE+0x08) -#define DANUBE_DMA_CTRL (volatile u32*)(DANUBE_DMA_BASE+0x10) -#define DANUBE_DMA_CPOLL (volatile u32*)(DANUBE_DMA_BASE+0x14) -#define DANUBE_DMA_CS (volatile u32*)(DANUBE_DMA_BASE+0x18) -#define DANUBE_DMA_CCTRL (volatile u32*)(DANUBE_DMA_BASE+0x1C) -#define DANUBE_DMA_CDBA (volatile u32*)(DANUBE_DMA_BASE+0x20) -#define DANUBE_DMA_CDLEN (volatile u32*)(DANUBE_DMA_BASE+0x24) -#define DANUBE_DMA_CIS (volatile u32*)(DANUBE_DMA_BASE+0x28) -#define DANUBE_DMA_CIE (volatile u32*)(DANUBE_DMA_BASE+0x2C) - -#define DANUBE_DMA_PS (volatile u32*)(DANUBE_DMA_BASE+0x40) -#define DANUBE_DMA_PCTRL (volatile u32*)(DANUBE_DMA_BASE+0x44) - -#define DANUBE_DMA_IRNEN (volatile u32*)(DANUBE_DMA_BASE+0xf4) -#define DANUBE_DMA_IRNCR (volatile u32*)(DANUBE_DMA_BASE+0xf8) -#define DANUBE_DMA_IRNICR (volatile u32*)(DANUBE_DMA_BASE+0xfc) -/***********************************************************************/ -/* Module : Debug register address and bits */ -/***********************************************************************/ - -#define DANUBE_Debug (0xBF106000) -/***********************************************************************/ - -/***MCD Break Bus Switch Register***/ -#define DANUBE_Debug_MCD_BBS ((volatile u32*)(DANUBE_Debug+ 0x0000)) -#define DANUBE_Debug_MCD_BBS_BTP1 (1 << 19) -#define DANUBE_Debug_MCD_BBS_BTP0 (1 << 18) -#define DANUBE_Debug_MCD_BBS_BSP1 (1 << 17) -#define DANUBE_Debug_MCD_BBS_BSP0 (1 << 16) -#define DANUBE_Debug_MCD_BBS_BT5EN (1 << 15) -#define DANUBE_Debug_MCD_BBS_BT4EN (1 << 14) -#define DANUBE_Debug_MCD_BBS_BT5 (1 << 13) -#define DANUBE_Debug_MCD_BBS_BT4 (1 << 12) -#define DANUBE_Debug_MCD_BBS_BS5EN (1 << 7) -#define DANUBE_Debug_MCD_BBS_BS4EN (1 << 6) -#define DANUBE_Debug_MCD_BBS_BS5 (1 << 5) -#define DANUBE_Debug_MCD_BBS_BS4 (1 << 4) - -/***MCD Multiplexer Control Register***/ -#define DANUBE_Debug_MCD_MCR ((volatile u32*)(DANUBE_Debug+ 0x0008)) -#define DANUBE_Debug_MCD_MCR_MUX5 (1 << 4) -#define DANUBE_Debug_MCD_MCR_MUX4 (1 << 3) -#define DANUBE_Debug_MCD_MCR_MUX1 (1 << 0) - -/***********************************************************************/ -/* Module : SRAM register address and bits */ -/***********************************************************************/ - -#define DANUBE_SRAM (0xBF980000) -/***********************************************************************/ - -/***SRAM Size Register***/ -#define DANUBE_SRAM_SRAM_SIZE ((volatile u32*)(DANUBE_SRAM+ 0x0800)) -#define DANUBE_SRAM_SRAM_SIZE_SIZE (value) (((( 1 << 23) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : BIU register address and bits */ -/***********************************************************************/ - -#define DANUBE_BIU (0xBFA80000) -/***********************************************************************/ - -/***BIU Identification Register***/ -#define DANUBE_BIU_BIU_ID ((volatile u32*)(DANUBE_BIU+ 0x0000)) -#define DANUBE_BIU_BIU_ID_ARCH (1 << 16) -#define DANUBE_BIU_BIU_ID_ID (value) (((( 1 << 8) - 1) & (value)) << 8) -#define DANUBE_BIU_BIU_ID_REV (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***BIU Access Error Cause Register***/ -#define DANUBE_BIU_BIU_ERRCAUSE ((volatile u32*)(DANUBE_BIU+ 0x0100)) -#define DANUBE_BIU_BIU_ERRCAUSE_ERR (1 << 31) -#define DANUBE_BIU_BIU_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16) -#define DANUBE_BIU_BIU_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***BIU Access Error Address Register***/ -#define DANUBE_BIU_BIU_ERRADDR ((volatile u32*)(DANUBE_BIU+ 0x0108)) -#define DANUBE_BIU_BIU_ERRADDR_ADDR - -/***********************************************************************/ -/* Module : ICU register address and bits */ -/***********************************************************************/ - -#define DANUBE_ICU (0xBF880200) -/***********************************************************************/ -#define DANUBE_ICU_IM0_ISR ((volatile u32*)(DANUBE_ICU + 0x0000)) -#define DANUBE_ICU_IM0_IER ((volatile u32*)(DANUBE_ICU + 0x0008)) -#define DANUBE_ICU_IM0_IOSR ((volatile u32*)(DANUBE_ICU + 0x0010)) -#define DANUBE_ICU_IM0_IRSR ((volatile u32*)(DANUBE_ICU + 0x0018)) -#define DANUBE_ICU_IM0_IMR ((volatile u32*)(DANUBE_ICU + 0x0020)) -#define DANUBE_ICU_IM0_IMR_IID (1 << 31) -#define DANUBE_ICU_IM0_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1)) -#define DANUBE_ICU_IM0_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0) -#define DANUBE_ICU_IM0_IR(value) (1 << (value)) - -#define DANUBE_ICU_IM1_ISR ((volatile u32*)(DANUBE_ICU + 0x0028)) -#define DANUBE_ICU_IM1_IER ((volatile u32*)(DANUBE_ICU + 0x0030)) -#define DANUBE_ICU_IM1_IOSR ((volatile u32*)(DANUBE_ICU + 0x0038)) -#define DANUBE_ICU_IM1_IRSR ((volatile u32*)(DANUBE_ICU + 0x0040)) -#define DANUBE_ICU_IM1_IMR ((volatile u32*)(DANUBE_ICU + 0x0048)) -#define DANUBE_ICU_IM1_IMR_IID (1 << 31) -#define DANUBE_ICU_IM1_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1)) -#define DANUBE_ICU_IM1_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0) -#define DANUBE_ICU_IM1_IR(value) (1 << (value)) - -#define DANUBE_ICU_IM2_ISR ((volatile u32*)(DANUBE_ICU + 0x0050)) -#define DANUBE_ICU_IM2_IER ((volatile u32*)(DANUBE_ICU + 0x0058)) -#define DANUBE_ICU_IM2_IOSR ((volatile u32*)(DANUBE_ICU + 0x0060)) -#define DANUBE_ICU_IM2_IRSR ((volatile u32*)(DANUBE_ICU + 0x0068)) -#define DANUBE_ICU_IM2_IMR ((volatile u32*)(DANUBE_ICU + 0x0070)) -#define DANUBE_ICU_IM2_IMR_IID (1 << 31) -#define DANUBE_ICU_IM2_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1)) -#define DANUBE_ICU_IM2_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0) -#define DANUBE_ICU_IM2_IR(value) (1 << (value)) - -#define DANUBE_ICU_IM3_ISR ((volatile u32*)(DANUBE_ICU + 0x0078)) -#define DANUBE_ICU_IM3_IER ((volatile u32*)(DANUBE_ICU + 0x0080)) -#define DANUBE_ICU_IM3_IOSR ((volatile u32*)(DANUBE_ICU + 0x0088)) -#define DANUBE_ICU_IM3_IRSR ((volatile u32*)(DANUBE_ICU + 0x0090)) -#define DANUBE_ICU_IM3_IMR ((volatile u32*)(DANUBE_ICU + 0x0098)) -#define DANUBE_ICU_IM3_IMR_IID (1 << 31) -#define DANUBE_ICU_IM3_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1)) -#define DANUBE_ICU_IM3_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0) -#define DANUBE_ICU_IM3_IR(value) (1 << (value)) - -#define DANUBE_ICU_IM4_ISR ((volatile u32*)(DANUBE_ICU + 0x00A0)) -#define DANUBE_ICU_IM4_IER ((volatile u32*)(DANUBE_ICU + 0x00A8)) -#define DANUBE_ICU_IM4_IOSR ((volatile u32*)(DANUBE_ICU + 0x00B0)) -#define DANUBE_ICU_IM4_IRSR ((volatile u32*)(DANUBE_ICU + 0x00B8)) -#define DANUBE_ICU_IM4_IMR ((volatile u32*)(DANUBE_ICU + 0x00C0)) -#define DANUBE_ICU_IM4_IMR_IID (1 << 31) -#define DANUBE_ICU_IM4_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1)) -#define DANUBE_ICU_IM4_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0) -#define DANUBE_ICU_IM4_IR(value) (1 << (value)) - -#define DANUBE_ICU_IM5_ISR ((volatile u32*)(DANUBE_ICU + 0x00C8)) -#define DANUBE_ICU_IM5_IER ((volatile u32*)(DANUBE_ICU + 0x00D0)) -#define DANUBE_ICU_IM5_IOSR ((volatile u32*)(DANUBE_ICU + 0x00D8)) -#define DANUBE_ICU_IM5_IRSR ((volatile u32*)(DANUBE_ICU + 0x00E0)) -#define DANUBE_ICU_IM5_IMR ((volatile u32*)(DANUBE_ICU + 0x00E8)) -#define DANUBE_ICU_IM5_IMR_IID (1 << 31) -#define DANUBE_ICU_IM5_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1)) -#define DANUBE_ICU_IM5_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0) -#define DANUBE_ICU_IM5_IR(value) (1 << (value)) - -/***Interrupt Vector Value Register***/ -//#define DANUBE_ICU_IM_VEC ((volatile u32*)(DANUBE_ICU+ 0x00f0)) -#define DANUBE_ICU_IM_VEC ((volatile u32*)(DANUBE_ICU+ 0x00EC)) - -/***Interrupt Vector Value Mask***/ -#define DANUBE_ICU_IM0_VEC_MASK 0x0000001f -#define DANUBE_ICU_IM1_VEC_MASK 0x000003e0 -#define DANUBE_ICU_IM2_VEC_MASK 0x00007c00 -#define DANUBE_ICU_IM3_VEC_MASK 0x000f8000 -#define DANUBE_ICU_IM4_VEC_MASK 0x01f00000 - -#define DANUBE_ICU_IM0_ISR_IR(value) (1<<(value)) -#define DANUBE_ICU_IM0_IER_IR(value) (1<<(value)) -#define DANUBE_ICU_IM1_ISR_IR(value) (1<<(value)) -#define DANUBE_ICU_IM1_IER_IR(value) (1<<(value)) -#define DANUBE_ICU_IM2_ISR_IR(value) (1<<(value)) -#define DANUBE_ICU_IM2_IER_IR(value) (1<<(value)) -#define DANUBE_ICU_IM3_ISR_IR(value) (1<<(value)) -#define DANUBE_ICU_IM3_IER_IR(value) (1<<(value)) -#define DANUBE_ICU_IM4_ISR_IR(value) (1<<(value)) -#define DANUBE_ICU_IM4_IER_IR(value) (1<<(value)) -#define DANUBE_ICU_IM5_ISR_IR(value) (1<<(value)) -#define DANUBE_ICU_IM5_IER_IR(value) (1<<(value)) - -/***DMA Interrupt Mask Value***/ -#define DANUBE_DMA_H_MASK 0x00000fff - -/***External Interrupt Control Register***/ -#define DANUBE_ICU_EIU (KSEG1+0x1f101000) -#define DANUBE_ICU_EIU_EXIN_C ((volatile u32*)(DANUBE_ICU_EIU+ 0x0000)) -#define DANUBE_ICU_EIU_INIC ((volatile u32*)(DANUBE_ICU_EIU+ 0x0004)) -#define DANUBE_ICU_EIU_INC ((volatile u32*)(DANUBE_ICU_EIU+ 0x0008)) -#define DANUBE_ICU_EIU_INEN ((volatile u32*)(DANUBE_ICU_EIU+ 0x000c)) - -/***********************************************************************/ -/* Module : MPS register address and bits */ -/***********************************************************************/ - -#define DANUBE_MPS (KSEG1+0x1F107000) -/***********************************************************************/ - -#define DANUBE_MPS_CHIPID ((volatile u32*)(DANUBE_MPS + 0x0344)) -#define DANUBE_MPS_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1)) -#define DANUBE_MPS_CHIPID_VERSION_SET(value) (((( 1 << 4) - 1) & (value)) << 28) -#define DANUBE_MPS_CHIPID_PARTNUM_GET(value) (((value) >> 12) & ((1 << 16) - 1)) -#define DANUBE_MPS_CHIPID_PARTNUM_SET(value) (((( 1 << 16) - 1) & (value)) << 12) -#define DANUBE_MPS_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 10) - 1)) -#define DANUBE_MPS_CHIPID_MANID_SET(value) (((( 1 << 10) - 1) & (value)) << 1) - -/* voice channel 0 ... 3 interrupt enable register */ -#define DANUBE_MPS_VC0ENR ((volatile u32*)(DANUBE_MPS + 0x0000)) -#define DANUBE_MPS_VC1ENR ((volatile u32*)(DANUBE_MPS + 0x0004)) -#define DANUBE_MPS_VC2ENR ((volatile u32*)(DANUBE_MPS + 0x0008)) -#define DANUBE_MPS_VC3ENR ((volatile u32*)(DANUBE_MPS + 0x000C)) -/* voice channel 0 ... 3 interrupt status read register */ -#define DANUBE_MPS_RVC0SR ((volatile u32*)(DANUBE_MPS + 0x0010)) -#define DANUBE_MPS_RVC1SR ((volatile u32*)(DANUBE_MPS + 0x0014)) -#define DANUBE_MPS_RVC2SR ((volatile u32*)(DANUBE_MPS + 0x0018)) -#define DANUBE_MPS_RVC3SR ((volatile u32*)(DANUBE_MPS + 0x001C)) -/* voice channel 0 ... 3 interrupt status set register */ -#define DANUBE_MPS_SVC0SR ((volatile u32*)(DANUBE_MPS + 0x0020)) -#define DANUBE_MPS_SVC1SR ((volatile u32*)(DANUBE_MPS + 0x0024)) -#define DANUBE_MPS_SVC2SR ((volatile u32*)(DANUBE_MPS + 0x0028)) -#define DANUBE_MPS_SVC3SR ((volatile u32*)(DANUBE_MPS + 0x002C)) -/* voice channel 0 ... 3 interrupt status clear register */ -#define DANUBE_MPS_CVC0SR ((volatile u32*)(DANUBE_MPS + 0x0030)) -#define DANUBE_MPS_CVC1SR ((volatile u32*)(DANUBE_MPS + 0x0034)) -#define DANUBE_MPS_CVC2SR ((volatile u32*)(DANUBE_MPS + 0x0038)) -#define DANUBE_MPS_CVC3SR ((volatile u32*)(DANUBE_MPS + 0x003C)) -/* common status 0 and 1 read register */ -#define DANUBE_MPS_RAD0SR ((volatile u32*)(DANUBE_MPS + 0x0040)) -#define DANUBE_MPS_RAD1SR ((volatile u32*)(DANUBE_MPS + 0x0044)) -/* common status 0 and 1 set register */ -#define DANUBE_MPS_SAD0SR ((volatile u32*)(DANUBE_MPS + 0x0048)) -#define DANUBE_MPS_SAD1SR ((volatile u32*)(DANUBE_MPS + 0x004C)) -/* common status 0 and 1 clear register */ -#define DANUBE_MPS_CAD0SR ((volatile u32*)(DANUBE_MPS + 0x0050)) -#define DANUBE_MPS_CAD1SR ((volatile u32*)(DANUBE_MPS + 0x0054)) -/* common status 0 and 1 enable register */ -#define DANUBE_MPS_AD0ENR ((volatile u32*)(DANUBE_MPS + 0x0058)) -#define DANUBE_MPS_AD1ENR ((volatile u32*)(DANUBE_MPS + 0x005C)) -/* notification enable register */ -#define DANUBE_MPS_CPU0_NFER ((volatile u32*)(DANUBE_MPS + 0x0060)) -#define DANUBE_MPS_CPU1_NFER ((volatile u32*)(DANUBE_MPS + 0x0064)) -/* CPU to CPU interrup request register */ -#define DANUBE_MPS_CPU0_2_CPU1_IRR ((volatile u32*)(DANUBE_MPS + 0x0070)) -#define DANUBE_MPS_CPU0_2_CPU1_IER ((volatile u32*)(DANUBE_MPS + 0x0074)) -/* Global interrupt request and request enable register */ -#define DANUBE_MPS_GIRR ((volatile u32*)(DANUBE_MPS + 0x0078)) -#define DANUBE_MPS_GIER ((volatile u32*)(DANUBE_MPS + 0x007C)) - -#define DANUBE_MPS_SRAM ((volatile u32*)(KSEG1 + 0x1F200000)) - -#define DANUBE_MPS_VCPU_FW_AD ((volatile u32*)(KSEG1 + 0x1F2001E0)) - -#define DANUBE_FUSE_BASE_ADDR (KSEG1+0x1F107354) - -/************************************************************************/ -/* Module : DEU register address and bits */ -/************************************************************************/ -//#define DANUBE_DEU_BASE_ADDR (0xBE102000) -#define DANUBE_DEU_BASE_ADDR (KSEG1 + 0x1E103100) -/* DEU Control Register */ -#define DANUBE_DEU_CLK ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0000)) -#define DANUBE_DEU_ID ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0008)) - -/* DEU control register */ -#define DANUBE_DES_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0010)) -#define DANUBE_DES_IHR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0014)) -#define DANUBE_DES_ILR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0018)) -#define DANUBE_DES_K1HR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x001C)) -#define DANUBE_DES_K1LR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0020)) -#define DANUBE_DES_K3HR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0024)) -#define DANUBE_DES_K3LR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0028)) -#define DANUBE_DES_IVHR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x002C)) -#define DANUBE_DES_IVLR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0030)) -#define DANUBE_DES_OHR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0040)) -#define DANUBE_DES_OLR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0050)) - -/* AES DEU register */ -#define DANUBE_AES_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0050)) -#define DANUBE_AES_ID3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0054)) -#define DANUBE_AES_ID2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0058)) -#define DANUBE_AES_ID1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x005C)) -#define DANUBE_AES_ID0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0060)) - -/* AES Key register */ -#define DANUBE_AES_K7R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0064)) -#define DANUBE_AES_K6R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0068)) -#define DANUBE_AES_K5R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x006C)) -#define DANUBE_AES_K4R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0070)) -#define DANUBE_AES_K3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0074)) -#define DANUBE_AES_K2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0078)) -#define DANUBE_AES_K1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x007C)) -#define DANUBE_AES_K0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0080)) - -/* AES vector register */ -#define DANUBE_AES_IV3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0084)) -#define DANUBE_AES_IV2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0088)) -#define DANUBE_AES_IV1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x008C)) -#define DANUBE_AES_IV0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0090)) -#define DANUBE_AES_0D3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0094)) -#define DANUBE_AES_0D2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0098)) -#define DANUBE_AES_OD1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x009C)) -#define DANUBE_AES_OD0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00A0)) - -/* hash control registe */ -#define DANUBE_HASH_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B0)) -#define DANUBE_HASH_MR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B4)) -#define DANUBE_HASH_D1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B8 )) -#define DANUBE_HASH_D2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00BC )) -#define DANUBE_HASH_D3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C0 )) -#define DANUBE_HASH_D4R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C4)) -#define DANUBE_HASH_D5R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C8)) - -#define DANUBE_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00EC)) - -#define DANUBE_DEU_IRNEN ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00F4)) -#define DANUBE_DEU_IRNCR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00F8)) -#define DANUBE_DEU_IRNICR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00FC)) - -/************************************************************************/ -/* Module : PPE register address and bits */ -/************************************************************************/ -#define DANUBE_PPE32_BASE 0xBE180000 -#define DANUBE_PPE32_DEBUG_BREAK_TRACE_REG (DANUBE_PPE32_BASE + (0x0000 * 4)) -#define DANUBE_PPE32_INT_MASK_STATUS_REG (DANUBE_PPE32_BASE + (0x0030 * 4)) -#define DANUBE_PPE32_INT_RESOURCE_REG (DANUBE_PPE32_BASE + (0x0040 * 4)) -#define DANUBE_PPE32_CDM_CODE_MEM_B0 (DANUBE_PPE32_BASE + (0x1000 * 4)) -#define DANUBE_PPE32_CDM_CODE_MEM_B1 (DANUBE_PPE32_BASE + (0x2000 * 4)) -#define DANUBE_PPE32_DATA_MEM_MAP_REG_BASE (DANUBE_PPE32_BASE + (0x4000 * 4)) - -#define DANUBE_PPE32_SRST (DANUBE_PPE32_BASE + 0x10080) - -/* - * ETOP MDIO Registers - */ -#define DANUBE_PPE32_ETOP_MDIO_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0600 * 4))) -#define DANUBE_PPE32_ETOP_MDIO_ACC ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0601 * 4))) -#define DANUBE_PPE32_ETOP_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0602 * 4))) -#define DANUBE_PPE32_ETOP_IG_VLAN_COS ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0603 * 4))) -#define DANUBE_PPE32_ETOP_IG_DSCP_COS3 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0604 * 4))) -#define DANUBE_PPE32_ETOP_IG_DSCP_COS2 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0605 * 4))) -#define DANUBE_PPE32_ETOP_IG_DSCP_COS1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0606 * 4))) -#define DANUBE_PPE32_ETOP_IG_DSCP_COS0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0607 * 4))) -#define DANUBE_PPE32_ETOP_IG_PLEN_CTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0608 * 4))) -#define DANUBE_PPE32_ETOP_ISR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060A * 4))) -#define DANUBE_PPE32_ETOP_IER ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060B * 4))) -#define DANUBE_PPE32_ETOP_VPID ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060C * 4))) - -/* ENET Register */ -#define DANUBE_PPE32_ENET_MAC_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0610 * 4))) -#define DANUBE_PPE32_ENET_IG_PKTDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0619 * 4))) -#define DANUBE_PPE32_ENET_CoS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0618 * 4))) - -/* Sharebuff SB RAM2 control data */ - -#define DANUBE_PPE32_SB2_DATABASE ((DANUBE_PPE32_BASE + (0x8C00 * 4))) -#define DANUBE_PPE32_SB2_CTRLBASE ((DANUBE_PPE32_BASE + (0x92E0 * 4))) -/************************************************************************/ -/* Module : PPE register address and bits */ -/************************************************************************/ -#define DANUBE_PPE32_BASE 0xBE180000 -#define DANUBE_PPE32_DEBUG_BREAK_TRACE_REG (DANUBE_PPE32_BASE + (0x0000 * 4)) -#define DANUBE_PPE32_INT_MASK_STATUS_REG (DANUBE_PPE32_BASE + (0x0030 * 4)) -#define DANUBE_PPE32_INT_RESOURCE_REG (DANUBE_PPE32_BASE + (0x0040 * 4)) -#define DANUBE_PPE32_CDM_CODE_MEM_B0 (DANUBE_PPE32_BASE + (0x1000 * 4)) -#define DANUBE_PPE32_CDM_CODE_MEM_B1 (DANUBE_PPE32_BASE + (0x2000 * 4)) -#define DANUBE_PPE32_DATA_MEM_MAP_REG_BASE (DANUBE_PPE32_BASE + (0x4000 * 4)) - -/* - * ETOP MDIO Registers - */ -#define ETOP_MDIO_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0600 * 4))) -#define ETOP_MDIO_ACC ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0601 * 4))) -#define ETOP_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0602 * 4))) -#define ETOP_IG_VLAN_COS ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0603 * 4))) -#define ETOP_IG_DSCP_COS3 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0604 * 4))) -#define ETOP_IG_DSCP_COS2 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0605 * 4))) -#define ETOP_IG_DSCP_COS1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0606 * 4))) -#define ETOP_IG_DSCP_COS0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0607 * 4))) -#define ETOP_IG_PLEN_CTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0608 * 4))) -#define ETOP_ISR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060A * 4))) -#define ETOP_IER ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060B * 4))) -#define ETOP_VPID ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060C * 4))) -#define ENET_MAC_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0610 * 4))) -#define ENETS_DBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0612 * 4))) -#define ENETS_CBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0613 * 4))) -#define ENETS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0614 * 4))) -#define ENETS_PGCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0615 * 4))) -#define ENETS_PKTCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0616 * 4))) -#define ENETS_BUF_CTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0617 * 4))) -#define ENETS_COS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0618 * 4))) -#define ENETS_IGDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0619 * 4))) -#define ENETS_IGERR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061A * 4))) -#define ENET_MAC_DA0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061B * 4))) -#define ENET_MAC_DA1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061C * 4))) - -#define ENETF_DBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0630 * 4))) -#define ENETF_CBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0631 * 4))) -#define ENETF_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0632 * 4))) -#define ENETF_PGCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0633 * 4))) -#define ENETF_PKTCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0634 * 4))) -#define ENETF_HFCTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0635 * 4))) -#define ENETF_TXCTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0636 * 4))) - -#define ENETF_VLCOS0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0638 * 4))) -#define ENETF_VLCOS1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0639 * 4))) -#define ENETF_VLCOS2 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063A * 4))) -#define ENETF_VLCOS3 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063B * 4))) -#define ENETF_EGERR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063C * 4))) -#define ENETF_EGDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063D * 4))) - -/* ENET Register */ -#define DANUBE_PPE32_ENET_MAC_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0610 * 4))) -#define DANUBE_PPE32_ENET_IG_PKTDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0619 * 4))) -#define DANUBE_PPE32_ENET_CoS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0618 * 4))) - -/* Sharebuff SB RAM2 control data */ - -#define DANUBE_PPE32_SB2_DATABASE ((DANUBE_PPE32_BASE + (0x8C00 * 4))) -#define DANUBE_PPE32_SB2_CTRLBASE ((DANUBE_PPE32_BASE + (0x92E0 * 4))) - -/***********************************************************************/ -/* Module : PCI register address and bits */ -/***********************************************************************/ -#define PCI_CR_PR_OFFSET (KSEG1+0x1E105400) -#define PCI_CFG_BASE (KSEG1+0x17000000) -#define PCI_MEM_BASE (KSEG1+0x18000000) -#define PCI_CS_PR_OFFSET (KSEG1+0x17000000) - -/* PCI CONTROLLER REGISTER ADDRESS MAP */ -#define PCI_CR_CLK_CTRL_REG (PCI_CR_PR_OFFSET + 0x0000) -#define PCI_CR_PCI_ID_REG (PCI_CR_PR_OFFSET + 0x0004) -#define PCI_CR_SFT_RST_REG (PCI_CR_PR_OFFSET + 0x0010) -#define PCI_CR_PCI_FPI_ERR_ADDR_REG (PCI_CR_PR_OFFSET + 0x0014) -#define PCI_CR_FCI_PCI_ERR_ADDR_REG (PCI_CR_PR_OFFSET + 0x0018) -#define PCI_CR_FPI_ERR_TAG_REG (PCI_CR_PR_OFFSET + 0x001C) -#define PCI_CR_PCI_IRR_REG (PCI_CR_PR_OFFSET + 0x0020) -#define PCI_CR_PCI_IRA_REG (PCI_CR_PR_OFFSET + 0x0024) -#define PCI_CR_PCI_IRM_REG (PCI_CR_PR_OFFSET + 0x0028) -#define PCI_CR_PCI_EOI_REG (PCI_CR_PR_OFFSET + 0x002C) -#define PCI_CR_PCI_MOD_REG (PCI_CR_PR_OFFSET + 0x0030) -#define PCI_CR_DV_ID_REG (PCI_CR_PR_OFFSET + 0x0034) -#define PCI_CR_SUBSYS_ID_REG (PCI_CR_PR_OFFSET + 0x0038) -#define PCI_CR_PCI_PM_REG (PCI_CR_PR_OFFSET + 0x003C) -#define PCI_CR_CLASS_CODE1_REG (PCI_CR_PR_OFFSET + 0x0040) -#define PCI_CR_BAR11MASK_REG (PCI_CR_PR_OFFSET + 0x0044) -#define PCI_CR_BAR12MASK_REG (PCI_CR_PR_OFFSET + 0x0048) -#define PCI_CR_BAR13MASK_REG (PCI_CR_PR_OFFSET + 0x004C) -#define PCI_CR_BAR14MASK_REG (PCI_CR_PR_OFFSET + 0x0050) -#define PCI_CR_BAR15MASK_REG (PCI_CR_PR_OFFSET + 0x0054) -#define PCI_CR_BAR16MASK_REG (PCI_CR_PR_OFFSET + 0x0058) -#define PCI_CR_CIS_PT1_REG (PCI_CR_PR_OFFSET + 0x005C) -#define PCI_CR_SUBSYS_ID1_REG (PCI_CR_PR_OFFSET + 0x0060) -#define PCI_CR_PCI_ADDR_MAP11_REG (PCI_CR_PR_OFFSET + 0x0064) -#define PCI_CR_PCI_ADDR_MAP12_REG (PCI_CR_PR_OFFSET + 0x0068) -#define PCI_CR_PCI_ADDR_MAP13_REG (PCI_CR_PR_OFFSET + 0x006C) -#define PCI_CR_PCI_ADDR_MAP14_REG (PCI_CR_PR_OFFSET + 0x0070) -#define PCI_CR_PCI_ADDR_MAP15_REG (PCI_CR_PR_OFFSET + 0x0074) -#define PCI_CR_PCI_ADDR_MAP16_REG (PCI_CR_PR_OFFSET + 0x0078) -#define PCI_CR_FPI_SEG_EN_REG (PCI_CR_PR_OFFSET + 0x007C) -#define PCI_CR_PC_ARB_REG (PCI_CR_PR_OFFSET + 0x0080) -#define PCI_CR_BAR21MASK_REG (PCI_CR_PR_OFFSET + 0x0084) -#define PCI_CR_BAR22MASK_REG (PCI_CR_PR_OFFSET + 0x0088) -#define PCI_CR_BAR23MASK_REG (PCI_CR_PR_OFFSET + 0x008C) -#define PCI_CR_BAR24MASK_REG (PCI_CR_PR_OFFSET + 0x0090) -#define PCI_CR_BAR25MASK_REG (PCI_CR_PR_OFFSET + 0x0094) -#define PCI_CR_BAR26MASK_REG (PCI_CR_PR_OFFSET + 0x0098) -#define PCI_CR_CIS_PT2_REG (PCI_CR_PR_OFFSET + 0x009C) -#define PCI_CR_SUBSYS_ID2_REG (PCI_CR_PR_OFFSET + 0x00A0) -#define PCI_CR_PCI_ADDR_MAP21_REG (PCI_CR_PR_OFFSET + 0x00A4) -#define PCI_CR_PCI_ADDR_MAP22_REG (PCI_CR_PR_OFFSET + 0x00A8) -#define PCI_CR_PCI_ADDR_MAP23_REG (PCI_CR_PR_OFFSET + 0x00AC) -#define PCI_CR_PCI_ADDR_MAP24_REG (PCI_CR_PR_OFFSET + 0x00B0) -#define PCI_CR_PCI_ADDR_MAP25_REG (PCI_CR_PR_OFFSET + 0x00B4) -#define PCI_CR_PCI_ADDR_MAP26_REG (PCI_CR_PR_OFFSET + 0x00B8) -#define PCI_CR_FPI_ADDR_MASK_REG (PCI_CR_PR_OFFSET + 0x00BC) -#define PCI_CR_FCI_ADDR_MAP0_REG (PCI_CR_PR_OFFSET + 0x00C0) -#define PCI_CR_FCI_ADDR_MAP1_REG (PCI_CR_PR_OFFSET + 0x00C4) -#define PCI_CR_FCI_ADDR_MAP2_REG (PCI_CR_PR_OFFSET + 0x00C8) -#define PCI_CR_FCI_ADDR_MAP3_REG (PCI_CR_PR_OFFSET + 0x00CC) -#define PCI_CR_FCI_ADDR_MAP4_REG (PCI_CR_PR_OFFSET + 0x00D0) -#define PCI_CR_FCI_ADDR_MAP5_REG (PCI_CR_PR_OFFSET + 0x00D4) -#define PCI_CR_FCI_ADDR_MAP6_REG (PCI_CR_PR_OFFSET + 0x00D8) -#define PCI_CR_FCI_ADDR_MAP7_REG (PCI_CR_PR_OFFSET + 0x00DC) -#define PCI_CR_FCI_ADDR_MAP11lo_REG (PCI_CR_PR_OFFSET + 0x00E0) -#define PCI_CR_FCI_ADDR_MAP11hg_REG (PCI_CR_PR_OFFSET + 0x00E4) -#define PCI_CR_FCI_BURST_LENGTH_REG (PCI_CR_PR_OFFSET + 0x00E8) -#define PCI_CR_PCI_SET_SERR_REG (PCI_CR_PR_OFFSET + 0x00EC) -#define PCI_CR_DMA_FPI_ST_ADDR_REG (PCI_CR_PR_OFFSET + 0x00F0) -#define PCI_CR_DMA_PCI_ST_ADDR_REG (PCI_CR_PR_OFFSET + 0x00F4) -#define PCI_CR_DMA_TRAN_CNT_REG (PCI_CR_PR_OFFSET + 0x00F8) -#define PCI_CR_DMA_TRAN_CTL_REG (PCI_CR_PR_OFFSET + 0x00FC) - -/* PCI CONFIGURATION SPACE REGISTER Base Address */ -#define EXT_PCI1_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x0800 -#define EXT_PCI2_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x1000 -#define EXT_PCI3_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x1800 -#define EXT_PCI4_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x2000 -#define EXT_PCI5_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x2800 -#define EXT_PCI6_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x3000 -#define EXT_PCI7_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x3800 -#define EXT_PCI8_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x4000 -#define EXT_PCI9_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x4800 -#define EXT_PCI10_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x5000 -#define EXT_PCI11_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x5800 -#define EXT_PCI12_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x6000 -#define EXT_PCI13_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x6800 -#define EXT_PCI14_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x7000 -#define EXT_PCI15_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x7800 -#define EXT_CARDBUS_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0XF000 - -/* PCI CONFIGURATION SPACE REGISTER ADDRESS MAP */ -#define PCI_CS_DEV_VEN_ID_REG (PCI_CS_PR_OFFSET + 0x0000) -#define PCI_CS_STS_CMD_REG (PCI_CS_PR_OFFSET + 0x0004) -#define PCI_CS_CL_CODE_REVIDG (PCI_CS_PR_OFFSET + 0x0008) -#define PCI_CS_BST_HT_LT_CLS_REG (PCI_CS_PR_OFFSET + 0x000C) -#define PCI_CS_BASE_ADDR1_REG (PCI_CS_PR_OFFSET + 0x0010) -#define PCI_CS_BASE_ADDR2_REG (PCI_CS_PR_OFFSET + 0x0014) -#define PCI_CS_BASE_ADDR3_REG (PCI_CS_PR_OFFSET + 0x0018) -#define PCI_CS_BASE_ADDR4_REG (PCI_CS_PR_OFFSET + 0x001C) -#define PCI_CS_BASE_ADDR5_REG (PCI_CS_PR_OFFSET + 0x0020) -#define PCI_CS_BASE_ADDR6_REG (PCI_CS_PR_OFFSET + 0x0024) -#define PCI_CS_CARDBUS_CIS_PT_REG (PCI_CS_PR_OFFSET + 0x0028) -#define PCI_CS_SUBSYS_VEN_ID_REG (PCI_CS_PR_OFFSET + 0x002C) -#define PCI_CS_EXROM_BAS_ADDR_REG (PCI_CS_PR_OFFSET + 0x0030) -#define PCI_CS_RES1_REG (PCI_CS_PR_OFFSET + 0x0034) -#define PCI_CS_RES2_REG (PCI_CS_PR_OFFSET + 0x0038) -#define PCI_CS_LAT_GNT_INTR_REG (PCI_CS_PR_OFFSET + 0x003C) -#define PCI_CS_PM_PT_CPID_REG (PCI_CS_PR_OFFSET + 0x0040) -#define PCI_CS_DAT_PMCSR_PM_REG (PCI_CS_PR_OFFSET + 0x0044) -#define PCI_CS_RES3_REG (PCI_CS_PR_OFFSET + 0x0048) -#define PCI_CS_RES4_REG (PCI_CS_PR_OFFSET + 0x004C) -#define PCI_CS_ERR_ADDR_PCI_FPI_REG (PCI_CS_PR_OFFSET + 0x0050) -#define PCI_CS_ERR_ADDR_FPI_PCI_REG (PCI_CS_PR_OFFSET + 0x0054) -#define PCI_CS_ERR_TAG_FPI_PCI_REG (PCI_CS_PR_OFFSET + 0x0058) -#define PCI_CS_PC_ARB_REG (PCI_CS_PR_OFFSET + 0x005C) -#define PCI_CS_FPI_PCI_INT_STS_REG (PCI_CS_PR_OFFSET + 0x0060) -#define PCI_CS_FPI_PCI_INT_ACK_REG (PCI_CS_PR_OFFSET + 0x0064) -#define PCI_CS_FPI_PCI_INT_MASK_REG (PCI_CS_PR_OFFSET + 0x0068) -#define PCI_CS_CARDBUS_CTL_STS_REG (PCI_CS_PR_OFFSET + 0x006C) - -// PCI CONTROLLER ADDRESS SPACE -#define PCI_CA_PR_OFFSET 0xB8000000 -#define PCI_CA_PR_END 0xBBFFFFFF - -// PCI CONTROLLER REGISTER ADDRESS MASK -#define PCI_CR_CLK_CTRL_MSK 0x82000000 -#define PCI_CR_PCI_ID_MSK 0x00000000 -#define PCI_CR_SFT_RST_MSK 0x00000002 -#define PCI_CR_PCI_FPI_ERR_ADDR_MSK 0x00000000 -#define PCI_CR_FCI_PCI_ERR_ADDR_MSK 0x00000000 -#define PCI_CR_FPI_ERR_TAG_MSK 0x00000000 -#define PCI_CR_PCI_IRR_MSK 0x07013B2F -#define PCI_CR_PCI_IRA_MSK 0x07013B2F -#define PCI_CR_PCI_IRM_MSK 0x07013B2F -#define PCI_CR_PCI_EOI_MSK 0x07013B2F -#define PCI_CR_PCI_MOD_MSK 0x1107070F -#define PCI_CR_DV_ID_MSK 0x00000000 -#define PCI_CR_SUBSYS_ID_MSK 0x00000000 -#define PCI_CR_PCI_PM_MSK 0x0000001F -#define PCI_CR_CLASS_CODE1_MSK 0x00000000 -#define PCI_CR_BAR11MASK_MSK 0x8FFFFFF8 -#define PCI_CR_BAR12MASK_MSK 0x80001F08 -#define PCI_CR_BAR13MASK_MSK 0x8FF00008 -#define PCI_CR_BAR14MASK_MSK 0x8FFFFF08 -#define PCI_CR_BAR15MASK_MSK 0x8FFFFF08 -#define PCI_CR_BAR16MASK_MSK 0x8FFFFFF9 -#define PCI_CR_CIS_PT1_MSK 0x03FFFFFF -#define PCI_CR_SUBSYS_ID1_MSK 0x00000000 -#define PCI_CR_PCI_ADDR_MAP11_MSK 0x7FFF0001 -#define PCI_CR_PCI_ADDR_MAP12_MSK 0x7FFFFF01 -#define PCI_CR_PCI_ADDR_MAP13_MSK 0x7FF00001 -#define PCI_CR_PCI_ADDR_MAP14_MSK 0x7FFFFF01 -#define PCI_CR_PCI_ADDR_MAP15_MSK 0x7FF00001 -#define PCI_CR_PCI_ADDR_MAP16_MSK 0x7FF00001 -#define PCI_CR_FPI_SEG_EN_MSK 0x000003FF -#define PCI_CR_CLASS_CODE2_MSK 0x00000000 -#define PCI_CR_BAR21MASK_MSK 0x800F0008 -#define PCI_CR_BAR22MASK_MSK 0x807F0008 -#define PCI_CR_BAR23MASK_MSK 0x8FF00008 -#define PCI_CR_BAR24MASK_MSK 0x8FFFFF08 -#define PCI_CR_BAR25MASK_MSK 0x8FFFFF08 -#define PCI_CR_BAR26MASK_MSK 0x8FFFFFF9 -#define PCI_CR_CIS_PT2_MSK 0x03FFFFFF -#define PCI_CR_SUBSYS_ID2_MSK 0x00000000 -#define PCI_CR_PCI_ADDR_MAP21_MSK 0x7FFE0001 -#define PCI_CR_PCI_ADDR_MAP22_MSK 0x7FFF0001 -#define PCI_CR_PCI_ADDR_MAP23_MSK 0x7FF00001 -#define PCI_CR_PCI_ADDR_MAP24_MSK 0x7FFFFF01 -#define PCI_CR_PCI_ADDR_MAP25_MSK 0x7FFFFF01 -#define PCI_CR_PCI_ADDR_MAP26_MSK 0x7FF00001 -#define PCI_CR_FPI_ADDR_MASK_MSK 0x00070000 -#define PCI_CR_FCI_ADDR_MAP0_MSK 0xFFF00000 -#define PCI_CR_FCI_ADDR_MAP1_MSK 0xFFF00000 -#define PCI_CR_FCI_ADDR_MAP2_MSK 0xFFF00000 -#define PCI_CR_FCI_ADDR_MAP3_MSK 0xFFF00000 -#define PCI_CR_FCI_ADDR_MAP4_MSK 0xFFF00000 -#define PCI_CR_FCI_ADDR_MAP5_MSK 0xFFF00000 -#define PCI_CR_FCI_ADDR_MAP6_MSK 0xFFF00000 -#define PCI_CR_FCI_ADDR_MAP7_MSK 0xFFF00000 -#define PCI_CR_FCI_ADDR_MAP11lo_MSK 0xFFFF0000 -#define PCI_CR_FCI_ADDR_MAP11hg_MSK 0xFFF00000 -#define PCI_CR_FCI_BURST_LENGTH_MSK 0x00000303 -#define PCI_CR_PCI_SET_SERR_MSK 0x00000001 -#define PCI_CR_DMA_FPI_ST_ADDR_MSK 0xFFFFFFFF -#define PCI_CR_DMA_PCI_ST_ADDR_MSK 0xFFFFFFFF -#define PCI_CR_DMA_TRAN_CNT_MSK 0x000003FF -#define PCI_CR_DMA_TRAN_CTL_MSK 0x00000003 - -#define INTERNAL_ARB_ENABLE_BIT 0 -#define ARB_SCHEME_BIT 1 -#define PCI_MASTER0_PRIOR_2BITS 2 -#define PCI_MASTER1_PRIOR_2BITS 4 -#define PCI_MASTER2_PRIOR_2BITS 6 -#define PCI_MASTER0_REQ_MASK_2BITS 8 -#define PCI_MASTER1_REQ_MASK_2BITS 10 -#define PCI_MASTER2_REQ_MASK_2BITS 12 - -#define IOPORT_RESOURCE_START 0x10000000 -#define IOPORT_RESOURCE_END 0xffffffff -#define IOMEM_RESOURCE_START 0x10000000 -#define IOMEM_RESOURCE_END 0xffffffff - -/***********************************************************************/ -#define DANUBE_REG32(addr) *((volatile u32 *)(addr)) -/***********************************************************************/ -#endif //DANUBE_H diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_pmu.h b/target/linux/danube/files/include/asm-mips/danube/danube_pmu.h deleted file mode 100644 index b404b262c3..0000000000 --- a/target/linux/danube/files/include/asm-mips/danube/danube_pmu.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ -#ifndef _DANUBE_PMU_H__ -#define _DANUBE_PMU_H__ - -#define DANUBE_PMU_PWDCR_DMA 0x20 -#define DANUBE_PMU_PWDCR_LED 0x800 -#define DANUBE_PMU_PWDCR_GPT 0x1000 -#define DANUBE_PMU_PWDCR_PPE 0x2000 -#define DANUBE_PMU_PWDCR_FPI 0x4000 - -void danube_pmu_enable (unsigned int module); -void danube_pmu_disable (unsigned int module); - -#endif diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_serial.h b/target/linux/danube/files/include/asm-mips/danube/danube_serial.h deleted file mode 100644 index 7b7994751b..0000000000 --- a/target/linux/danube/files/include/asm-mips/danube/danube_serial.h +++ /dev/null @@ -1,194 +0,0 @@ -/* incaAscSio.h - (DANUBE) ASC UART tty driver header */ - -#ifndef __DANUBE_ASC_H -#define __DANUBE_ASC_H - -/****************************************************************************** -** -** FILE NAME : serial.c -** PROJECT : Danube -** MODULES : ASC/UART -** -** DATE : 27 MAR 2006 -** AUTHOR : Liu Peng -** DESCRIPTION : Asynchronous Serial Channel (ASC/UART) Driver Header File -** COPYRIGHT : Copyright (c) 2006 -** Infineon Technologies AG -** Am Campeon 1-12, 85579 Neubiberg, Germany -** -** This program is free software; you can redistribute it and/or modify -** it under the terms of the GNU General Public License as published by -** the Free Software Foundation; either version 2 of the License, or -** (at your option) any later version. -** -** HISTORY -** $Date $Author $Comment -** 27 MAR 2006 Liu Peng Initiate Version (rev 1.7) -** 23 OCT 2006 Xu Liang Add GPL header. -*******************************************************************************/ - -/* channel operating modes */ -/*#define ASCOPT_CSIZE 0x00000003 -#define ASCOPT_CS7 0x00000001 -#define ASCOPT_CS8 0x00000002 -#define ASCOPT_PARENB 0x00000004 -#define ASCOPT_STOPB 0x00000008 -#define ASCOPT_PARODD 0x00000010 -#define ASCOPT_CREAD 0x00000020 -*/ -#define ASC_OPTIONS (ASCOPT_CREAD | ASCOPT_CS8) - -/* ASC input select (0 or 1) */ -#define CONSOLE_TTY 0 - -#define DANUBEASC_TXFIFO_FL 1 -#define DANUBEASC_RXFIFO_FL 1 -#define DANUBEASC_TXFIFO_FULL 16 - -/* interrupt lines masks for the ASC device interrupts*/ -/* change these macroses if it's necessary */ -#define DANUBEASC_IRQ_LINE_ALL 0x0000007f /* all IRQs */ - -#define DANUBEASC_IRQ_LINE_TIR 0x00000001 /* Tx Int */ -#define DANUBEASC_IRQ_LINE_TBIR 0x00000002 /* Tx Buffer Int */ -#define DANUBEASC_IRQ_LINE_RIR 0x00000004 /* Rx Int */ -#define DANUBEASC_IRQ_LINE_EIR 0x00000008 /* Error Int */ -#define DANUBEASC_IRQ_LINE_ABSTIR 0x00000010 /* Autobaud Start Int */ -#define DANUBEASC_IRQ_LINE_ABDETIP 0x00000020 /* Autobaud Detection Int */ -#define DANUBEASC_IRQ_LINE_SFCIR 0x00000040 /* Software Flow Control Int */ - -/* interrupt controller access macros */ -#define ASC_INTERRUPTS_ENABLE(X) \ -*((volatile unsigned int*) DANUBE_ICU_IM0_IER) |= X; -#define ASC_INTERRUPTS_DISABLE(X) \ -*((volatile unsigned int*) DANUBE_ICU_IM0_IER) &= ~X; -#define ASC_INTERRUPTS_CLEAR(X) \ -*((volatile unsigned int*) DANUBE_ICU_IM0_ISR) = X; - -/* CLC register's bits and bitfields */ -#define ASCCLC_DISR 0x00000001 -#define ASCCLC_DISS 0x00000002 -#define ASCCLC_RMCMASK 0x0000FF00 -#define ASCCLC_RMCOFFSET 8 - -/* CON register's bits and bitfields */ -#define ASCCON_MODEMASK 0x0000000f -#define ASCCON_M_8ASYNC 0x0 -#define ASCCON_M_8IRDA 0x1 -#define ASCCON_M_7ASYNC 0x2 -#define ASCCON_M_7IRDA 0x3 -#define ASCCON_WLSMASK 0x0000000c -#define ASCCON_WLSOFFSET 2 -#define ASCCON_WLS_8BIT 0x0 -#define ASCCON_WLS_7BIT 0x1 -#define ASCCON_PEN 0x00000010 -#define ASCCON_ODD 0x00000020 -#define ASCCON_SP 0x00000040 -#define ASCCON_STP 0x00000080 -#define ASCCON_BRS 0x00000100 -#define ASCCON_FDE 0x00000200 -#define ASCCON_ERRCLK 0x00000400 -#define ASCCON_EMMASK 0x00001800 -#define ASCCON_EMOFFSET 11 -#define ASCCON_EM_ECHO_OFF 0x0 -#define ASCCON_EM_ECHO_AB 0x1 -#define ASCCON_EM_ECHO_ON 0x2 -#define ASCCON_LB 0x00002000 -#define ASCCON_ACO 0x00004000 -#define ASCCON_R 0x00008000 -#define ASCCON_PAL 0x00010000 -#define ASCCON_FEN 0x00020000 -#define ASCCON_RUEN 0x00040000 -#define ASCCON_ROEN 0x00080000 -#define ASCCON_TOEN 0x00100000 -#define ASCCON_BEN 0x00200000 -#define ASCCON_TXINV 0x01000000 -#define ASCCON_RXINV 0x02000000 -#define ASCCON_TXMSB 0x04000000 -#define ASCCON_RXMSB 0x08000000 - -/* STATE register's bits and bitfields */ -#define ASCSTATE_REN 0x00000001 -#define ASCSTATE_PE 0x00010000 -#define ASCSTATE_FE 0x00020000 -#define ASCSTATE_RUE 0x00040000 -#define ASCSTATE_ROE 0x00080000 -#define ASCSTATE_TOE 0x00100000 -#define ASCSTATE_BE 0x00200000 -#define ASCSTATE_TXBVMASK 0x07000000 -#define ASCSTATE_TXBVOFFSET 24 -#define ASCSTATE_TXEOM 0x08000000 -#define ASCSTATE_RXBVMASK 0x70000000 -#define ASCSTATE_RXBVOFFSET 28 -#define ASCSTATE_RXEOM 0x80000000 -#define ASCSTATE_ANY (ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE) - -/* WHBSTATE register's bits and bitfields */ -#define ASCWHBSTATE_CLRREN 0x00000001 -#define ASCWHBSTATE_SETREN 0x00000002 -#define ASCWHBSTATE_CLRPE 0x00000004 -#define ASCWHBSTATE_CLRFE 0x00000008 -#define ASCWHBSTATE_CLRRUE 0x00000010 -#define ASCWHBSTATE_CLRROE 0x00000020 -#define ASCWHBSTATE_CLRTOE 0x00000040 -#define ASCWHBSTATE_CLRBE 0x00000080 -#define ASCWHBSTATE_SETPE 0x00000100 -#define ASCWHBSTATE_SETFE 0x00000200 -#define ASCWHBSTATE_SETRUE 0x00000400 -#define ASCWHBSTATE_SETROE 0x00000800 -#define ASCWHBSTATE_SETTOE 0x00001000 -#define ASCWHBSTATE_SETBE 0x00002000 - -/* ABCON register's bits and bitfields */ -#define ASCABCON_ABEN 0x0001 -#define ASCABCON_AUREN 0x0002 -#define ASCABCON_ABSTEN 0x0004 -#define ASCABCON_ABDETEN 0x0008 -#define ASCABCON_FCDETEN 0x0010 - -/* FDV register mask, offset and bitfields*/ -#define ASCFDV_VALUE_MASK 0x000001FF - -/* WHBABCON register's bits and bitfields */ -#define ASCWHBABCON_CLRABEN 0x0001 -#define ASCWHBABCON_SETABEN 0x0002 - -/* ABSTAT register's bits and bitfields */ -#define ASCABSTAT_FCSDET 0x0001 -#define ASCABSTAT_FCCDET 0x0002 -#define ASCABSTAT_SCSDET 0x0004 -#define ASCABSTAT_SCCDET 0x0008 -#define ASCABSTAT_DETWAIT 0x0010 - -/* WHBABSTAT register's bits and bitfields */ -#define ASCWHBABSTAT_CLRFCSDET 0x0001 -#define ASCWHBABSTAT_SETFCSDET 0x0002 -#define ASCWHBABSTAT_CLRFCCDET 0x0004 -#define ASCWHBABSTAT_SETFCCDET 0x0008 -#define ASCWHBABSTAT_CLRSCSDET 0x0010 -#define ASCWHBABSTAT_SETSCSDET 0x0020 -#define ASCWHBABSTAT_CLRSCCDET 0x0040 -#define ASCWHBABSTAT_SETSCCDET 0x0080 -#define ASCWHBABSTAT_CLRDETWAIT 0x0100 -#define ASCWHBABSTAT_SETDETWAIT 0x0200 - -/* TXFCON register's bits and bitfields */ -#define ASCTXFCON_TXFIFO1 0x00000400 -#define ASCTXFCON_TXFEN 0x0001 -#define ASCTXFCON_TXFFLU 0x0002 -#define ASCTXFCON_TXFITLMASK 0x3F00 -#define ASCTXFCON_TXFITLOFF 8 - -/* RXFCON register's bits and bitfields */ -#define ASCRXFCON_RXFIFO1 0x00000400 -#define ASCRXFCON_RXFEN 0x0001 -#define ASCRXFCON_RXFFLU 0x0002 -#define ASCRXFCON_RXFITLMASK 0x3F00 -#define ASCRXFCON_RXFITLOFF 8 - -/* FSTAT register's bits and bitfields */ -#define ASCFSTAT_RXFFLMASK 0x003F -#define ASCFSTAT_TXFFLMASK 0x3F00 -#define ASCFSTAT_TXFFLOFF 8 - -#endif /* __DANUBE_ASC_H */ diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_wdt.h b/target/linux/danube/files/include/asm-mips/danube/danube_wdt.h deleted file mode 100644 index 1c31fc9ee2..0000000000 --- a/target/linux/danube/files/include/asm-mips/danube/danube_wdt.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2005 infineon - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ - -#ifndef DANUBE_WDT_H -#define DANUBE_WDT_H - -/* Danube wdt ioctl control */ -#define DANUBE_WDT_IOC_MAGIC 0xc0 -#define DANUBE_WDT_IOC_START _IOW(DANUBE_WDT_IOC_MAGIC, 0, int) -#define DANUBE_WDT_IOC_STOP _IO(DANUBE_WDT_IOC_MAGIC, 1) -#define DANUBE_WDT_IOC_PING _IO(DANUBE_WDT_IOC_MAGIC, 2) -#define DANUBE_WDT_IOC_SET_PWL _IOW(DANUBE_WDT_IOC_MAGIC, 3, int) -#define DANUBE_WDT_IOC_SET_DSEN _IOW(DANUBE_WDT_IOC_MAGIC, 4, int) -#define DANUBE_WDT_IOC_SET_LPEN _IOW(DANUBE_WDT_IOC_MAGIC, 5, int) -#define DANUBE_WDT_IOC_GET_STATUS _IOR(DANUBE_WDT_IOC_MAGIC, 6, int) -#define DANUBE_WDT_IOC_SET_CLKDIV _IOW(DANUBE_WDT_IOC_MAGIC, 7, int) - -/* password 1 and 2 */ -#define DANUBE_WDT_PW1 0x000000BE -#define DANUBE_WDT_PW2 0x000000DC - -#define DANUBE_WDT_CLKDIV0_VAL 1 -#define DANUBE_WDT_CLKDIV1_VAL 64 -#define DANUBE_WDT_CLKDIV2_VAL 4096 -#define DANUBE_WDT_CLKDIV3_VAL 262144 -#define DANUBE_WDT_CLKDIV0 0 -#define DANUBE_WDT_CLKDIV1 1 -#define DANUBE_WDT_CLKDIV2 2 -#define DANUBE_WDT_CLKDIV3 3 - -#endif diff --git a/target/linux/danube/files/include/asm-mips/danube/ifx_peripheral_definitions.h b/target/linux/danube/files/include/asm-mips/danube/ifx_peripheral_definitions.h deleted file mode 100644 index 5bd788fff6..0000000000 --- a/target/linux/danube/files/include/asm-mips/danube/ifx_peripheral_definitions.h +++ /dev/null @@ -1,119 +0,0 @@ -//************************************************************************* -//* Summary of definitions which are used in each peripheral * -//************************************************************************* - -#ifndef peripheral_definitions_h -#define peripheral_definitions_h - -////#include "cpu.h" -// -///* These files have to be included by each peripheral */ -//#include <sysdefs.h> -//#include <excep.h> -//#include <cpusubsys.h> -//#include <sys_api.h> -//#include <mips.h> -//#include "SRAM_address_map.h" -// -///* common header files for all CPU's */ -//#include "iiu.h" -//#include "bcu.h" -//#include "FPI_address_map.h" -//#include "direct_interrupts.h" - -///////////////////////////////////////////////////////////////////////// - -//extern int _clz(); -//extern void _nop(); -//extern void _sleep(); -//extern void sys_enable_int(); - -typedef unsigned char UINT8; -typedef signed char INT8; -typedef unsigned short UINT16; -typedef signed short INT16; -typedef unsigned int UINT32; -typedef signed int INT32; -typedef unsigned long long UINT64; -typedef signed long long INT64; - -#define REG8( addr ) (*(volatile UINT8 *) (addr)) -#define REG16( addr ) (*(volatile UINT16 *)(addr)) -#define REG32( addr ) (*(volatile UINT32 *)(addr)) -#define REG64( addr ) (*(volatile UINT64 *)(addr)) - -/* define routine to set FPI access in Supervisor Mode */ -#define IFX_SUPERVISOR_ON() REG32(FB0_CFG) = 0x01 -/* Supervisor mode ends, following functions will be done in User mode */ -#define IFX_SUPERVISOR_OFF() REG32(FB0_CFG) = 0x00 -/* Supervisor mode ends, following functions will be done in User mode */ -#define IFX_SUPERVISOR_MODE() REG32(FB0_CFG) -/* Supervisor mode ends, following functions will be done in User mode */ -#define IFX_SUPERVISOR_SET(svm) REG32(FB0_CFG) = svm -/* enable all Interrupts in IIU */ -//#define IFX_ENABLE_IRQ(irq_mask, im_base) REG32(im_base | IIU_MASK) = irq_mask -///* get all high priority interrupt bits in IIU */ -//#define IFX_GET_IRQ_MASKED(im_base) REG32(im_base | IIU_IRMASKED) -///* signal ends of interrupt to IIU */ -//#define IFX_CLEAR_DIRECT_IRQ(irq_bit, im_base) REG32(im_base | IIU_IR) = irq_bit -///* force IIU interrupt register */ -//#define IFX_FORCE_IIU_REGISTER(data, im_base) REG32(im_base | IIU_IRDEBUG) = data -///* get all bits of interrupt register */ -//#define IFX_GET_IRQ_UNMASKED(im_base) REG32(im_base | IIU_IR) -/* insert a NOP instruction */ -#define NOP _nop() -/* CPU goes to power down mode until interrupt occurs */ -#define IFX_CPU_SLEEP _sleep() -/* enable all interrupts to CPU */ -#define IFX_CPU_ENABLE_ALL_INTERRUPT sys_enable_int() -/* get all low priority interrupt bits in peripheral */ -#define IFX_GET_LOW_PRIO_IRQ(int_reg) REG32(int_reg) -/* clear low priority interrupt bit in peripheral */ -#define IFX_CLEAR_LOW_PRIO_IRQ(irq_bit, int_reg) REG32(int_reg) = irq_bit -/* write FPI bus */ -#define WRITE_FPI_BYTE(data, addr) REG8(addr) = data -#define WRITE_FPI_16BIT(data, addr) REG16(addr) = data -#define WRITE_FPI_32BIT(data, addr) REG32(addr) = data -/* read FPI bus */ -#define READ_FPI_BYTE(addr) REG8(addr) -#define READ_FPI_16BIT(addr) REG16(addr) -#define READ_FPI_32BIT(addr) REG32(addr) -/* write peripheral register */ -#define WRITE_PERIPHERAL_REGISTER(data, addr) REG32(addr) = data - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr) = data -#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr) = data -#else //not CONFIG_CPU_LITTLE_ENDIAN -#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr+2) = data -#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr+3) = data -#endif //CONFIG_CPU_LITTLE_ENDIAN - -/* read peripheral register */ -#define READ_PERIPHERAL_REGISTER(addr) REG32(addr) - -/* read/modify(or)/write peripheral register */ -#define RMW_OR_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) | data -/* read/modify(and)/write peripheral register */ -#define RMW_AND_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) & (UINT32)data - -/* CPU-independent mnemonic constants */ -/* CLC register bits */ -#define IFX_CLC_ENABLE 0x00000000 -#define IFX_CLC_DISABLE 0x00000001 -#define IFX_CLC_DISABLE_STATUS 0x00000002 -#define IFX_CLC_SUSPEND_ENABLE 0x00000004 -#define IFX_CLC_CLOCK_OFF_DISABLE 0x00000008 -#define IFX_CLC_OVERWRITE_SPEN_FSOE 0x00000010 -#define IFX_CLC_FAST_CLOCK_SWITCH_OFF 0x00000020 -#define IFX_CLC_RUN_DIVIDER_MASK 0x0000FF00 -#define IFX_CLC_RUN_DIVIDER_OFFSET 8 -#define IFX_CLC_SLEEP_DIVIDER_MASK 0x00FF0000 -#define IFX_CLC_SLEEP_DIVIDER_OFFSET 16 -#define IFX_CLC_SPECIFIC_DIVIDER_MASK 0x00FF0000 -#define IFX_CLC_SPECIFIC_DIVIDER_OFFSET 24 - -/* number of cycles to wait for interrupt service routine to be called */ -#define WAIT_CYCLES 50 - -#endif /* PERIPHERAL_DEFINITIONS_H not yet defined */ diff --git a/target/linux/danube/files/include/asm-mips/danube/ifx_ssc.h b/target/linux/danube/files/include/asm-mips/danube/ifx_ssc.h deleted file mode 100644 index e541c8ec3b..0000000000 --- a/target/linux/danube/files/include/asm-mips/danube/ifx_ssc.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - * ifx_ssc.h defines some data sructures used in ifx_ssc.c - * - * Copyright (C) 2004 Michael Schoenenborn (IFX COM TI BT) - * - * - */ - -#ifndef __IFX_SSC_H -#define __IFX_SSC_H -#ifdef __KERNEL__ -#include <asm/danube/ifx_ssc_defines.h> -#endif //__KERNEL__ - -#define PORT_CNT 1 // assume default value - -/* symbolic constants to be used in SSC routines */ - -// ### TO DO: bad performance -#define IFX_SSC_TXFIFO_ITL 1 -#define IFX_SSC_RXFIFO_ITL 1 - -struct ifx_ssc_statistics { - unsigned int abortErr; /* abort error */ - unsigned int modeErr; /* master/slave mode error */ - unsigned int txOvErr; /* TX Overflow error */ - unsigned int txUnErr; /* TX Underrun error */ - unsigned int rxOvErr; /* RX Overflow error */ - unsigned int rxUnErr; /* RX Underrun error */ - unsigned int rxBytes; - unsigned int txBytes; -}; - -struct ifx_ssc_hwopts { - unsigned int AbortErrDetect:1; /* Abort Error detection (in slave mode) */ - unsigned int rxOvErrDetect:1; /* Receive Overflow Error detection */ - unsigned int rxUndErrDetect:1; /* Receive Underflow Error detection */ - unsigned int txOvErrDetect:1; /* Transmit Overflow Error detection */ - unsigned int txUndErrDetect:1; /* Transmit Underflow Error detection */ - unsigned int echoMode:1; /* Echo mode */ - unsigned int loopBack:1; /* Loopback mode */ - unsigned int idleValue:1; /* Idle value */ - unsigned int clockPolarity:1; /* Idle clock is high or low */ - unsigned int clockPhase:1; /* Tx on trailing or leading edge */ - unsigned int headingControl:1; /* LSB first or MSB first */ - unsigned int dataWidth:6; /* from 2 up to 32 bits */ - unsigned int masterSelect:1; /* Master or Slave mode */ - unsigned int modeRxTx:2; /* rx/tx mode */ - unsigned int gpoCs:8; /* choose outputs to use for chip select */ - unsigned int gpoInv:8; /* invert GPO outputs */ -}; - -struct ifx_ssc_frm_opts { - bool FrameEnable; // SFCON.SFEN - unsigned int DataLength; // SFCON.DLEN - unsigned int PauseLength; // SFCON.PLEN - unsigned int IdleData; // SFCON.IDAT - unsigned int IdleClock; // SFCON.ICLK - bool StopAfterPause; // SFCON.STOP -}; - -struct ifx_ssc_frm_status { - bool DataBusy; // SFSTAT.DBSY - bool PauseBusy; // SFSTAT.PBSY - unsigned int DataCount; // SFSTAT.DCNT - unsigned int PauseCount; // SFSTAT.PCNT - bool EnIntAfterData; // SFCON.IBEN - bool EnIntAfterPause; // SFCON.IAEN -}; - -typedef struct { - char *buf; - size_t len; -} ifx_ssc_buf_item_t; - -// data structures for batch execution -typedef union { - struct { - bool save_options; - } init; - ifx_ssc_buf_item_t read; - ifx_ssc_buf_item_t write; - ifx_ssc_buf_item_t rd_wr; - unsigned int set_baudrate; - struct ifx_ssc_frm_opts set_frm; - unsigned int set_gpo; - struct ifx_ssc_hwopts set_hwopts; -} ifx_ssc_batch_cmd_param; - -struct ifx_ssc_batch_list { - unsigned int cmd; - ifx_ssc_batch_cmd_param cmd_param; - struct ifx_ssc_batch_list *next; -}; - -#ifdef __KERNEL__ -#define IFX_SSC_IS_MASTER(p) ((p)->opts.masterSelect == SSC_MASTER_MODE) - -struct ifx_ssc_port { - unsigned long mapbase; - struct ifx_ssc_hwopts opts; - struct ifx_ssc_statistics stats; - struct ifx_ssc_frm_status frm_status; - struct ifx_ssc_frm_opts frm_opts; - /* wait queue for ifx_ssc_read() */ - wait_queue_head_t rwait, pwait; - int port_nr; - char port_is_open; /* exclusive open - boolean */ -// int no_of_bits; /* number of _valid_ bits */ -// int elem_size; /* shift for element (no of bytes)*/ - /* buffer and pointers to the read/write position */ - char *rxbuf; /* buffer for RX */ - char *rxbuf_end; /* buffer end pointer for RX */ - volatile char *rxbuf_ptr; /* buffer write pointer for RX */ - char *txbuf; /* buffer for TX */ - char *txbuf_end; /* buffer end pointer for TX */ - volatile char *txbuf_ptr; /* buffer read pointer for TX */ - unsigned int baud; - /* each channel has its own interrupts */ - /* (transmit/receive/error/frame) */ - unsigned int txirq, rxirq, errirq, frmirq; -}; -/* default values for SSC configuration */ -// values of CON -#define IFX_SSC_DEF_IDLE_DATA 1 /* enable */ -#define IFX_SSC_DEF_BYTE_VALID_CTL 1 /* enable */ -#define IFX_SSC_DEF_DATA_WIDTH 32 /* bits */ -#define IFX_SSC_DEF_ABRT_ERR_DETECT 0 /* disable */ -#define IFX_SSC_DEF_RO_ERR_DETECT 1 /* enable */ -#define IFX_SSC_DEF_RU_ERR_DETECT 0 /* disable */ -#define IFX_SSC_DEF_TO_ERR_DETECT 0 /* disable */ -#define IFX_SSC_DEF_TU_ERR_DETECT 0 /* disable */ -#define IFX_SSC_DEF_LOOP_BACK 0 /* disable */ -#define IFX_SSC_DEF_ECHO_MODE 0 /* disable */ -#define IFX_SSC_DEF_CLOCK_POLARITY 0 /* low */ -#define IFX_SSC_DEF_CLOCK_PHASE 1 /* 0: shift on leading edge, latch on trailling edge, 1, otherwise */ -#define IFX_SSC_DEF_HEADING_CONTROL IFX_SSC_MSB_FIRST -#define IFX_SSC_DEF_MODE_RXTX IFX_SSC_MODE_RXTX -// other values -#define IFX_SSC_DEF_MASTERSLAVE IFX_SSC_MASTER_MODE /* master */ -#ifdef CONFIG_USE_EMULATOR -#define IFX_SSC_DEF_BAUDRATE 10000 -#else -#define IFX_SSC_DEF_BAUDRATE 2000000 -#endif -#define IFX_SSC_DEF_RMC 0x10 - -#define IFX_SSC_DEF_TXFIFO_FL 8 -#define IFX_SSC_DEF_RXFIFO_FL 1 - -#if 1 //TODO -#define IFX_SSC_DEF_GPO_CS 0x3 /* no chip select */ -#define IFX_SSC_DEF_GPO_INV 0 /* no chip select */ -#else -#error "what is ur Chip Select???" -#endif -#define IFX_SSC_DEF_SFCON 0 /* no serial framing */ -#if 0 -#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\ - IFX_SSC_R_BIT | IFX_SSC_E_BIT | IFX_SSC_F_BIT -#endif -#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\ - IFX_SSC_R_BIT | IFX_SSC_E_BIT -#endif /* __KERNEL__ */ - -// batch execution commands -#define IFX_SSC_BATCH_CMD_INIT 1 -#define IFX_SSC_BATCH_CMD_READ 2 -#define IFX_SSC_BATCH_CMD_WRITE 3 -#define IFX_SSC_BATCH_CMD_RD_WR 4 -#define IFX_SSC_BATCH_CMD_SET_BAUDRATE 5 -#define IFX_SSC_BATCH_CMD_SET_HWOPTS 6 -#define IFX_SSC_BATCH_CMD_SET_FRM 7 -#define IFX_SSC_BATCH_CMD_SET_GPO 8 -#define IFX_SSC_BATCH_CMD_FIFO_FLUSH 9 -//#define IFX_SSC_BATCH_CMD_ -//#define IFX_SSC_BATCH_CMD_ -#define IFX_SSC_BATCH_CMD_END_EXEC 0 - -/* Macros to configure SSC hardware */ -/* headingControl: */ -#define IFX_SSC_LSB_FIRST 0 -#define IFX_SSC_MSB_FIRST 1 -/* dataWidth: */ -#define IFX_SSC_MIN_DATA_WIDTH 2 -#define IFX_SSC_MAX_DATA_WIDTH 32 -/* master/slave mode select */ -#define IFX_SSC_MASTER_MODE 1 -#define IFX_SSC_SLAVE_MODE 0 -/* rx/tx mode */ -// ### TO DO: !!! ATTENTION! Hardware dependency => move to ifx_ssc_defines.h -#define IFX_SSC_MODE_RXTX 0 -#define IFX_SSC_MODE_RX 1 -#define IFX_SSC_MODE_TX 2 -#define IFX_SSC_MODE_OFF 3 -#define IFX_SSC_MODE_MASK IFX_SSC_MODE_RX | IFX_SSC_MODE_TX - -/* GPO values */ -#define IFX_SSC_MAX_GPO_OUT 7 - -#define IFX_SSC_RXREQ_BLOCK_SIZE 32768 - -/***********************/ -/* defines for ioctl's */ -/***********************/ -#define IFX_SSC_IOCTL_MAGIC 'S' -/* read out the statistics */ -#define IFX_SSC_STATS_READ _IOR(IFX_SSC_IOCTL_MAGIC, 1, struct ifx_ssc_statistics) -/* clear the statistics */ -#define IFX_SSC_STATS_RESET _IO(IFX_SSC_IOCTL_MAGIC, 2) -/* set the baudrate */ -#define IFX_SSC_BAUD_SET _IOW(IFX_SSC_IOCTL_MAGIC, 3, unsigned int) -/* get the current baudrate */ -#define IFX_SSC_BAUD_GET _IOR(IFX_SSC_IOCTL_MAGIC, 4, unsigned int) -/* set hardware options */ -#define IFX_SSC_HWOPTS_SET _IOW(IFX_SSC_IOCTL_MAGIC, 5, struct ifx_ssc_hwopts) -/* get the current hardware options */ -#define IFX_SSC_HWOPTS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 6, struct ifx_ssc_hwopts) -/* set transmission mode */ -#define IFX_SSC_RXTX_MODE_SET _IOW(IFX_SSC_IOCTL_MAGIC, 7, unsigned int) -/* get the current transmission mode */ -#define IFX_SSC_RXTX_MODE_GET _IOR(IFX_SSC_IOCTL_MAGIC, 8, unsigned int) -/* abort transmission */ -#define IFX_SSC_ABORT _IO(IFX_SSC_IOCTL_MAGIC, 9) -#define IFX_SSC_FIFO_FLUSH _IO(IFX_SSC_IOCTL_MAGIC, 9) - -/* set general purpose outputs */ -#define IFX_SSC_GPO_OUT_SET _IOW(IFX_SSC_IOCTL_MAGIC, 32, unsigned int) -/* clear general purpose outputs */ -#define IFX_SSC_GPO_OUT_CLR _IOW(IFX_SSC_IOCTL_MAGIC, 33, unsigned int) -/* get general purpose outputs */ -#define IFX_SSC_GPO_OUT_GET _IOR(IFX_SSC_IOCTL_MAGIC, 34, unsigned int) - -/*** serial framing ***/ -/* get status of serial framing */ -#define IFX_SSC_FRM_STATUS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 48, struct ifx_ssc_frm_status) -/* get counter reload values and control bits */ -#define IFX_SSC_FRM_CONTROL_GET _IOR(IFX_SSC_IOCTL_MAGIC, 49, struct ifx_ssc_frm_opts) -/* set counter reload values and control bits */ -#define IFX_SSC_FRM_CONTROL_SET _IOW(IFX_SSC_IOCTL_MAGIC, 50, struct ifx_ssc_frm_opts) - -/*** batch execution ***/ -/* do batch execution */ -#define IFX_SSC_BATCH_EXEC _IOW(IFX_SSC_IOCTL_MAGIC, 64, struct ifx_ssc_batch_list) - -#ifdef __KERNEL__ -// routines from ifx_ssc.c -// ### TO DO -/* kernel interface for read and write */ -ssize_t ifx_ssc_kread (int, char *, size_t); -ssize_t ifx_ssc_kwrite (int, const char *, size_t); - -#ifdef CONFIG_IFX_VP_KERNEL_TEST -void ifx_ssc_tc (void); -#endif // CONFIG_IFX_VP_KERNEL_TEST - -#endif //__KERNEL__ -#endif // __IFX_SSC_H diff --git a/target/linux/danube/files/include/asm-mips/danube/ifx_ssc_defines.h b/target/linux/danube/files/include/asm-mips/danube/ifx_ssc_defines.h deleted file mode 100644 index 805d48ad84..0000000000 --- a/target/linux/danube/files/include/asm-mips/danube/ifx_ssc_defines.h +++ /dev/null @@ -1,547 +0,0 @@ -#ifndef IFX_SSC_DEFINES_H -#define IFX_SSC_DEFINES_H - -#include "ifx_peripheral_definitions.h" - -/* maximum SSC FIFO size */ -#define IFX_SSC_MAX_FIFO_SIZE 32 - -/* register map of SSC */ - -/* address of the Clock Control Register of the SSC */ -#define IFX_SSC_CLC 0x00000000 -/* IFX_SSC_CLC register is significant in bits 23 downto 8 and in bits 5, 3, 2, 0 - bit 1 is hardware modified*/ -#define IFX_SSC_CLC_readmask 0x00FFFFEF -#define IFX_SSC_CLC_writemask 0x00FFFF3D -#define IFX_SSC_CLC_hwmask 0x00000002 -#define IFX_SSC_CLC_dontcare (IFX_SSC_CLC_readmask & IFX_SSC_CLC_writemask & ~IFX_SSC_CLC_hwmask) - -/* address of Port Input Select Register of the SSC */ -#define IFX_SSC_PISEL 0x00000004 -/* IFX_SSC_PISEL register is significant in lowest three bits only */ -#define IFX_SSC_PISEL_readmask 0x00000007 -#define IFX_SSC_PISEL_writemask 0x00000007 -#define IFX_SSC_PISEL_hwmask 0x00000000 -#define IFX_SSC_PISEL_dontcare (IFX_SSC_PISEL_readmask & IFX_SSC_PISEL_writemask & ~IFX_SSC_PISEL_hwmask) - -/* address of Identification Register of the SSC */ -#define IFX_SSC_ID 0x00000008 -/* IFX_SSC_ID register is significant in no bit */ -#define IFX_SSC_ID_readmask 0x0000FF3F -#define IFX_SSC_ID_writemask 0x00000000 -#define IFX_SSC_ID_hwmask 0x00000000 -#define IFX_SSC_ID_dontcare (IFX_SSC_ID_readmask & IFX_SSC_ID_writemask & ~IFX_SSC_ID_hwmask) - -/* address of the Control Register of the SSC */ -#define IFX_SSC_CON 0x00000010 -/* IFX_SSC_CON register is significant in bits 23:22, 20:16 and 12:0 */ -#define IFX_SSC_CON_readmask 0x01DF1FFF -#define IFX_SSC_CON_writemask 0x01DF1FFF -#define IFX_SSC_CON_hwmask 0x00000000 -#define IFX_SSC_CON_dontcare (IFX_SSC_CON_readmask & IFX_SSC_CON_writemask & ~IFX_SSC_CON_hwmask) - -/* address of the Status Register of the SSC */ -#define IFX_SSC_STATE 0x00000014 -/* IFX_SSC_STATE register is readable in bits 30:28, 26:24, 20:16, 12:7 and 2:0 - all bits except 1:0 are hardware modified */ -#define IFX_SSC_STATE_readmask 0x771F3F87 -#define IFX_SSC_STATE_writemask 0x00000000 -#define IFX_SSC_STATE_hwmask 0x771F3F84 -#define IFX_SSC_STATE_dontcare (IFX_SSC_STATE_readmask & IFX_SSC_STATE_writemask & ~IFX_SSC_STATE_hwmask) - -/* address of the Write Hardware Modified Control Register Bits of the SSC */ -#define IFX_SSC_WHBSTATE 0x00000018 -/* IFX_SSC_WHBSTATE register is write only */ -#define IFX_SSC_WHBSTATE_readmask 0x00000000 -#define IFX_SSC_WHBSTATE_writemask 0x0000FFFF -#define IFX_SSC_WHBSTATE_hwmask 0x00000000 -#define IFX_SSC_WHBSTATE_dontcare (IFX_SSC_WHBSTATE_readmask & IFX_SSC_WHBSTATE_writemask & ~IFX_SSC_WHBSTATE_hwmask) - -/* address of the Baudrate Timer Reload Register of the SSC */ -#define IFX_SSC_BR 0x00000040 -/* IFX_SSC_BR register is significant in bit 15 downto 0*/ -#define IFX_SSC_BR_readmask 0x0000FFFF -#define IFX_SSC_BR_writemask 0x0000FFFF -#define IFX_SSC_BR_hwmask 0x00000000 -#define IFX_SSC_BR_dontcare (IFX_SSC_BR_readmask & IFX_SSC_BR_writemask & ~IFX_SSC_BR_hwmask) - -/* address of the Baudrate Timer Status Register of the SSC */ -#define IFX_SSC_BRSTAT 0x00000044 -/* IFX_SSC_BRSTAT register is significant in bit 15 downto 0*/ -#define IFX_SSC_BRSTAT_readmask 0x0000FFFF -#define IFX_SSC_BRSTAT_writemask 0x00000000 -#define IFX_SSC_BRSTAT_hwmask 0x0000FFFF -#define IFX_SSC_BRSTAT_dontcare (IFX_SSC_BRSTAT_readmask & IFX_SSC_BRSTAT_writemask & ~IFX_SSC_BRSTAT_hwmask) - -/* address of the Transmitter Buffer Register of the SSC */ -#define IFX_SSC_TB 0x00000020 -/* IFX_SSC_TB register is significant in bit 31 downto 0*/ -#define IFX_SSC_TB_readmask 0xFFFFFFFF -#define IFX_SSC_TB_writemask 0xFFFFFFFF -#define IFX_SSC_TB_hwmask 0x00000000 -#define IFX_SSC_TB_dontcare (IFX_SSC_TB_readmask & IFX_SSC_TB_writemask & ~IFX_SSC_TB_hwmask) - -/* address of the Reciver Buffer Register of the SSC */ -#define IFX_SSC_RB 0x00000024 -/* IFX_SSC_RB register is significant in no bits*/ -#define IFX_SSC_RB_readmask 0xFFFFFFFF -#define IFX_SSC_RB_writemask 0x00000000 -#define IFX_SSC_RB_hwmask 0xFFFFFFFF -#define IFX_SSC_RB_dontcare (IFX_SSC_RB_readmask & IFX_SSC_RB_writemask & ~IFX_SSC_RB_hwmask) - -/* address of the Receive FIFO Control Register of the SSC */ -#define IFX_SSC_RXFCON 0x00000030 -/* IFX_SSC_RXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */ -#define IFX_SSC_RXFCON_readmask 0x00003F03 -#define IFX_SSC_RXFCON_writemask 0x00003F03 -#define IFX_SSC_RXFCON_hwmask 0x00000000 -#define IFX_SSC_RXFCON_dontcare (IFX_SSC_RXFCON_readmask & IFX_SSC_RXFCON_writemask & ~IFX_SSC_RXFCON_hwmask) - -/* address of the Transmit FIFO Control Register of the SSC */ -#define IFX_SSC_TXFCON 0x00000034 -/* IFX_SSC_TXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */ -#define IFX_SSC_TXFCON_readmask 0x00003F03 -#define IFX_SSC_TXFCON_writemask 0x00003F03 -#define IFX_SSC_TXFCON_hwmask 0x00000000 -#define IFX_SSC_TXFCON_dontcare (IFX_SSC_TXFCON_readmask & IFX_SSC_TXFCON_writemask & ~IFX_SSC_TXFCON_hwmask) - -/* address of the FIFO Status Register of the SSC */ -#define IFX_SSC_FSTAT 0x00000038 -/* IFX_SSC_FSTAT register is significant in no bit*/ -#define IFX_SSC_FSTAT_readmask 0x00003F3F -#define IFX_SSC_FSTAT_writemask 0x00000000 -#define IFX_SSC_FSTAT_hwmask 0x00003F3F -#define IFX_SSC_FSTAT_dontcare (IFX_SSC_FSTAT_readmask & IFX_SSC_FSTAT_writemask & ~IFX_SSC_FSTAT_hwmask) - -/* address of the Data Frame Control register of the SSC */ -#define IFX_SSC_SFCON 0x00000060 -#define IFX_SSC_SFCON_readmask 0xFFDFFFFD -#define IFX_SSC_SFCON_writemask 0xFFDFFFFD -#define IFX_SSC_SFCON_hwmask 0x00000000 -#define IFX_SSC_SFCON_dontcare (IFX_SSC_SFCON_readmask & IFX_SSC_SFCON_writemask & ~IFX_SSC_SFCON_hwmask) - -/* address of the Data Frame Status register of the SSC */ -#define IFX_SSC_SFSTAT 0x00000064 -#define IFX_SSC_SFSTAT_readmask 0xFFC0FFF3 -#define IFX_SSC_SFSTAT_writemask 0x00000000 -#define IFX_SSC_SFSTAT_hwmask 0xFFC0FFF3 -#define IFX_SSC_SFSTAT_dontcare (IFX_SSC_SFSTAT_readmask & IFX_SSC_SFSTAT_writemask & ~IFX_SSC_SFSTAT_hwmask) - -/* address of the General Purpose Output Control register of the SSC */ -#define IFX_SSC_GPOCON 0x00000070 -#define IFX_SSC_GPOCON_readmask 0x0000FFFF -#define IFX_SSC_GPOCON_writemask 0x0000FFFF -#define IFX_SSC_GPOCON_hwmask 0x00000000 -#define IFX_SSC_GPOCON_dontcare (IFX_SSC_GPOCON_readmask & IFX_SSC_GPOCON_writemask & ~IFX_SSC_GPOCON_hwmask) - -/* address of the General Purpose Output Status register of the SSC */ -#define IFX_SSC_GPOSTAT 0x00000074 -#define IFX_SSC_GPOSTAT_readmask 0x000000FF -#define IFX_SSC_GPOSTAT_writemask 0x00000000 -#define IFX_SSC_GPOSTAT_hwmask 0x00000000 -#define IFX_SSC_GPOSTAT_dontcare (IFX_SSC_GPOSTAT_readmask & IFX_SSC_GPOSTAT_writemask & ~IFX_SSC_GPOSTAT_hwmask) - -/* address of the Force GPO Status register of the SSC */ -#define IFX_SSC_WHBGPOSTAT 0x00000078 -#define IFX_SSC_WHBGPOSTAT_readmask 0x00000000 -#define IFX_SSC_WHBGPOSTAT_writemask 0x0000FFFF -#define IFX_SSC_WHBGPOSTAT_hwmask 0x00000000 -#define IFX_SSC_WHBGPOSTAT_dontcare (IFX_SSC_WHBGPOSTAT_readmask & IFX_SSC_WHBGPOSTAT_writemask & ~IFX_SSC_WHBGPOSTAT_hwmask) - -/* address of the Receive Request Register of the SSC */ -#define IFX_SSC_RXREQ 0x00000080 -#define IFX_SSC_RXREQ_readmask 0x0000FFFF -#define IFX_SSC_RXREQ_writemask 0x0000FFFF -#define IFX_SSC_RXREQ_hwmask 0x00000000 -#define IFX_SSC_RXREQ_dontcare (IFX_SSC_RXREQ_readmask & IFX_SSC_RXREQ_writemask & ~IFX_SSC_RXREQ_hwmask) - -/* address of the Receive Count Register of the SSC */ -#define IFX_SSC_RXCNT 0x00000084 -#define IFX_SSC_RXCNT_readmask 0x0000FFFF -#define IFX_SSC_RXCNT_writemask 0x00000000 -#define IFX_SSC_RXCNT_hwmask 0x0000FFFF -#define IFX_SSC_RXCNT_dontcare (IFX_SSC_RXCNT_readmask & IFX_SSC_RXCNT_writemask & ~IFX_SSC_RXCNT_hwmask) - -/* address of the DMA Configuration Register of the SSC */ -#define IFX_SSC_DMACON 0x000000EC -#define IFX_SSC_DMACON_readmask 0x0000FFFF -#define IFX_SSC_DMACON_writemask 0x00000000 -#define IFX_SSC_DMACON_hwmask 0x0000FFFF -#define IFX_SSC_DMACON_dontcare (IFX_SSC_DMACON_readmask & IFX_SSC_DMACON_writemask & ~IFX_SSC_DMACON_hwmask) - -//------------------------------------------------------ -// interrupt register for enabling interrupts, mask register of irq_reg -#define IFX_SSC_IRN_EN 0xF4 -// read/write -#define IFX_SSC_IRN_EN_readmask 0x0000000F -#define IFX_SSC_IRN_EN_writemask 0x0000000F -#define IFX_SSC_IRN_EN_hwmask 0x00000000 -#define IFX_SSC_IRN_EN_dontcare (IFX_SSC_IRN_EN_readmask & IFX_SSC_IRN_EN_writemask & ~IFX_SSC_IRN_EN_hwmask) - -// interrupt register for accessing interrupts -#define IFX_SSC_IRN_CR 0xF8 -// read/write -#define IFX_SSC_IRN_CR_readmask 0x0000000F -#define IFX_SSC_IRN_CR_writemask 0x0000000F -#define IFX_SSC_IRN_CR_hwmask 0x0000000F -#define IFX_SSC_IRN_CR_dontcare (IFX_SSC_IRN_CR_readmask & IFX_SSC_IRN_CR_writemask & ~IFX_SSC_IRN_CR_hwmask) - -// interrupt register for stimulating interrupts -#define IFX_SSC_IRN_ICR 0xFC -// read/write -#define IFX_SSC_IRN_ICR_readmask 0x0000000F -#define IFX_SSC_IRN_ICR_writemask 0x0000000F -#define IFX_SSC_IRN_ICR_hwmask 0x00000000 -#define IFX_SSC_IRN_ICR_dontcare (IFX_SSC_IRN_ICR_readmask & IFX_SSC_IRN_ICR_writemask & ~IFX_SSC_IRN_ICR_hwmask) - -//--------------------------------------------------------------------- -// Number of IRQs and bitposition of IRQ -#define IFX_SSC_NUM_IRQ 4 -#define IFX_SSC_T_BIT 0x00000001 -#define IFX_SSC_R_BIT 0x00000002 -#define IFX_SSC_E_BIT 0x00000004 -#define IFX_SSC_F_BIT 0x00000008 - -/* bit masks for SSC registers */ - -/* ID register */ -#define IFX_SSC_PERID_REV_MASK 0x0000001F -#define IFX_SSC_PERID_CFG_MASK 0x00000020 -#define IFX_SSC_PERID_ID_MASK 0x0000FF00 -#define IFX_SSC_PERID_REV_OFFSET 0 -#define IFX_SSC_PERID_CFG_OFFSET 5 -#define IFX_SSC_PERID_ID_OFFSET 8 -#define IFX_SSC_PERID_ID 0x45 -#define IFX_SSC_PERID_DMA_ON 0x00000020 -#define IFX_SSC_PERID_RXFS_MASK 0x003F0000 -#define IFX_SSC_PERID_RXFS_OFFSET 16 -#define IFX_SSC_PERID_TXFS_MASK 0x3F000000 -#define IFX_SSC_PERID_TXFS_OFFSET 24 - -/* PISEL register */ -#define IFX_SSC_PISEL_MASTER_IN_A 0x0000 -#define IFX_SSC_PISEL_MASTER_IN_B 0x0001 -#define IFX_SSC_PISEL_SLAVE_IN_A 0x0000 -#define IFX_SSC_PISEL_SLAVE_IN_B 0x0002 -#define IFX_SSC_PISEL_CLOCK_IN_A 0x0000 -#define IFX_SSC_PISEL_CLOCK_IN_B 0x0004 - -/* IFX_SSC_CON register */ -#define IFX_SSC_CON_ECHO_MODE_ON 0x01000000 -#define IFX_SSC_CON_ECHO_MODE_OFF 0x00000000 -#define IFX_SSC_CON_IDLE_HIGH 0x00800000 -#define IFX_SSC_CON_IDLE_LOW 0x00000000 -#define IFX_SSC_CON_ENABLE_BYTE_VALID 0x00400000 -#define IFX_SSC_CON_DISABLE_BYTE_VALID 0x00000000 -#define IFX_SSC_CON_DATA_WIDTH_OFFSET 16 -#define IFX_SSC_CON_DATA_WIDTH_MASK 0x001F0000 -#define IFX_SSC_ENCODE_DATA_WIDTH(width) (((width - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET) & IFX_SSC_CON_DATA_WIDTH_MASK) - -#define IFX_SSC_CON_RESET_ON_BAUDERR 0x00002000 -#define IFX_SSC_CON_GO_ON_ON_BAUDERR 0x00000000 - -#define IFX_SSC_CON_RX_UFL_CHECK 0x00001000 -#define IFX_SSC_CON_RX_UFL_IGNORE 0x00000000 -#define IFX_SSC_CON_TX_UFL_CHECK 0x00000800 -#define IFX_SSC_CON_TX_UFL_IGNORE 0x00000000 -#define IFX_SSC_CON_ABORT_ERR_CHECK 0x00000400 -#define IFX_SSC_CON_ABORT_ERR_IGNORE 0x00000000 -#define IFX_SSC_CON_RX_OFL_CHECK 0x00000200 -#define IFX_SSC_CON_RX_OFL_IGNORE 0x00000000 -#define IFX_SSC_CON_TX_OFL_CHECK 0x00000100 -#define IFX_SSC_CON_TX_OFL_IGNORE 0x00000000 -#define IFX_SSC_CON_ALL_ERR_CHECK 0x00001F00 -#define IFX_SSC_CON_ALL_ERR_IGNORE 0x00000000 - -#define IFX_SSC_CON_LOOPBACK_MODE 0x00000080 -#define IFX_SSC_CON_NO_LOOPBACK 0x00000000 -#define IFX_SSC_CON_HALF_DUPLEX 0x00000080 -#define IFX_SSC_CON_FULL_DUPLEX 0x00000000 -#define IFX_SSC_CON_CLOCK_FALL 0x00000040 -#define IFX_SSC_CON_CLOCK_RISE 0x00000000 -#define IFX_SSC_CON_SHIFT_THEN_LATCH 0x00000000 -#define IFX_SSC_CON_LATCH_THEN_SHIFT 0x00000020 -#define IFX_SSC_CON_MSB_FIRST 0x00000010 -#define IFX_SSC_CON_LSB_FIRST 0x00000000 -#define IFX_SSC_CON_ENABLE_CSB 0x00000008 -#define IFX_SSC_CON_DISABLE_CSB 0x00000000 -#define IFX_SSC_CON_INVERT_CSB 0x00000004 -#define IFX_SSC_CON_TRUE_CSB 0x00000000 -#define IFX_SSC_CON_RX_OFF 0x00000002 -#define IFX_SSC_CON_RX_ON 0x00000000 -#define IFX_SSC_CON_TX_OFF 0x00000001 -#define IFX_SSC_CON_TX_ON 0x00000000 - -/* IFX_SSC_STATE register */ -#define IFX_SSC_STATE_RX_BYTE_VALID_OFFSET 28 -#define IFX_SSC_STATE_RX_BYTE_VALID_MASK 0x70000000 -#define IFX_SSC_DECODE_RX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET) -#define IFX_SSC_STATE_TX_BYTE_VALID_OFFSET 24 -#define IFX_SSC_STATE_TX_BYTE_VALID_MASK 0x07000000 -#define IFX_SSC_DECODE_TX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_TX_BYTE_VALID_MASK) >> IFX_SSC_STATE_TX_BYTE_VALID_OFFSET) -#define IFX_SSC_STATE_BIT_COUNT_OFFSET 16 -#define IFX_SSC_STATE_BIT_COUNT_MASK 0x001F0000 -#define IFX_SSC_DECODE_DATA_WIDTH(con_state) (((con_state & IFX_SSC_STATE_BIT_COUNT_MASK) >> IFX_SSC_STATE_BIT_COUNT_OFFSET) + 1) -#define IFX_SSC_STATE_BUSY 0x00002000 -#define IFX_SSC_STATE_RX_UFL 0x00001000 -#define IFX_SSC_STATE_TX_UFL 0x00000800 -#define IFX_SSC_STATE_ABORT_ERR 0x00000400 -#define IFX_SSC_STATE_RX_OFL 0x00000200 -#define IFX_SSC_STATE_TX_OFL 0x00000100 -#define IFX_SSC_STATE_MODE_ERR 0x00000080 -#define IFX_SSC_STATE_SLAVE_IS_SELECTED 0x00000004 -#define IFX_SSC_STATE_IS_MASTER 0x00000002 -#define IFX_SSC_STATE_IS_ENABLED 0x00000001 - -/* WHBSTATE register */ -#define IFX_SSC_WHBSTATE_DISABLE_SSC 0x0001 -#define IFX_SSC_WHBSTATE_CONFIGURATION_MODE 0x0001 -#define IFX_SSC_WHBSTATE_CLR_ENABLE 0x0001 - -#define IFX_SSC_WHBSTATE_ENABLE_SSC 0x0002 -#define IFX_SSC_WHBSTATE_RUN_MODE 0x0002 -#define IFX_SSC_WHBSTATE_SET_ENABLE 0x0002 - -#define IFX_SSC_WHBSTATE_SLAVE_MODE 0x0004 -#define IFX_SSC_WHBSTATE_CLR_MASTER_SELECT 0x0004 - -#define IFX_SSC_WHBSTATE_MASTER_MODE 0x0008 -#define IFX_SSC_WHBSTATE_SET_MASTER_SELECT 0x0008 - -#define IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR 0x0010 -#define IFX_SSC_WHBSTATE_SET_RX_UFL_ERROR 0x0020 - -#define IFX_SSC_WHBSTATE_CLR_MODE_ERROR 0x0040 -#define IFX_SSC_WHBSTATE_SET_MODE_ERROR 0x0080 - -#define IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR 0x0100 -#define IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR 0x0200 -#define IFX_SSC_WHBSTATE_CLR_ABORT_ERROR 0x0400 -#define IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR 0x0800 -#define IFX_SSC_WHBSTATE_SET_TX_OFL_ERROR 0x1000 -#define IFX_SSC_WHBSTATE_SET_RX_OFL_ERROR 0x2000 -#define IFX_SSC_WHBSTATE_SET_ABORT_ERROR 0x4000 -#define IFX_SSC_WHBSTATE_SET_TX_UFL_ERROR 0x8000 -#define IFX_SSC_WHBSTATE_CLR_ALL_ERROR 0x0F50 -#define IFX_SSC_WHBSTATE_SET_ALL_ERROR 0xF0A0 - -/* BR register */ -#define IFX_SSC_BR_BAUDRATE_OFFSET 0 -#define IFX_SSC_BR_BAUDRATE_MASK 0xFFFF - -/* BR_STAT register */ -#define IFX_SSC_BRSTAT_BAUDTIMER_OFFSET 0 -#define IFX_SSC_BRSTAT_BAUDTIMER_MASK 0xFFFF - -/* TB register */ -#define IFX_SSC_TB_DATA_OFFSET 0 -#define IFX_SSC_TB_DATA_MASK 0xFFFFFFFF - -/* RB register */ -#define IFX_SSC_RB_DATA_OFFSET 0 -#define IFX_SSC_RB_DATA_MASK 0xFFFFFFFF - -/* RXFCON and TXFCON registers */ -#define IFX_SSC_XFCON_FIFO_DISABLE 0x0000 -#define IFX_SSC_XFCON_FIFO_ENABLE 0x0001 -#define IFX_SSC_XFCON_FIFO_FLUSH 0x0002 -#define IFX_SSC_XFCON_ITL_MASK 0x00003F00 -#define IFX_SSC_XFCON_ITL_OFFSET 8 - -/* FSTAT register */ -#define IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET 0 -#define IFX_SSC_FSTAT_RECEIVED_WORDS_MASK 0x003F -#define IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET 8 -#define IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK 0x3F00 - -/* GPOCON register */ -#define IFX_SSC_GPOCON_INVOUT0_POS 0 -#define IFX_SSC_GPOCON_INV_OUT0 0x00000001 -#define IFX_SSC_GPOCON_TRUE_OUT0 0x00000000 -#define IFX_SSC_GPOCON_INVOUT1_POS 1 -#define IFX_SSC_GPOCON_INV_OUT1 0x00000002 -#define IFX_SSC_GPOCON_TRUE_OUT1 0x00000000 -#define IFX_SSC_GPOCON_INVOUT2_POS 2 -#define IFX_SSC_GPOCON_INV_OUT2 0x00000003 -#define IFX_SSC_GPOCON_TRUE_OUT2 0x00000000 -#define IFX_SSC_GPOCON_INVOUT3_POS 3 -#define IFX_SSC_GPOCON_INV_OUT3 0x00000008 -#define IFX_SSC_GPOCON_TRUE_OUT3 0x00000000 -#define IFX_SSC_GPOCON_INVOUT4_POS 4 -#define IFX_SSC_GPOCON_INV_OUT4 0x00000010 -#define IFX_SSC_GPOCON_TRUE_OUT4 0x00000000 -#define IFX_SSC_GPOCON_INVOUT5_POS 5 -#define IFX_SSC_GPOCON_INV_OUT5 0x00000020 -#define IFX_SSC_GPOCON_TRUE_OUT5 0x00000000 -#define IFX_SSC_GPOCON_INVOUT6_POS 6 -#define IFX_SSC_GPOCON_INV_OUT6 0x00000040 -#define IFX_SSC_GPOCON_TRUE_OUT6 0x00000000 -#define IFX_SSC_GPOCON_INVOUT7_POS 7 -#define IFX_SSC_GPOCON_INV_OUT7 0x00000080 -#define IFX_SSC_GPOCON_TRUE_OUT7 0x00000000 -#define IFX_SSC_GPOCON_INV_OUT_ALL 0x000000FF -#define IFX_SSC_GPOCON_TRUE_OUT_ALL 0x00000000 - -#define IFX_SSC_GPOCON_ISCSB0_POS 8 -#define IFX_SSC_GPOCON_IS_CSB0 0x00000100 -#define IFX_SSC_GPOCON_IS_GPO0 0x00000000 -#define IFX_SSC_GPOCON_ISCSB1_POS 9 -#define IFX_SSC_GPOCON_IS_CSB1 0x00000200 -#define IFX_SSC_GPOCON_IS_GPO1 0x00000000 -#define IFX_SSC_GPOCON_ISCSB2_POS 10 -#define IFX_SSC_GPOCON_IS_CSB2 0x00000400 -#define IFX_SSC_GPOCON_IS_GPO2 0x00000000 -#define IFX_SSC_GPOCON_ISCSB3_POS 11 -#define IFX_SSC_GPOCON_IS_CSB3 0x00000800 -#define IFX_SSC_GPOCON_IS_GPO3 0x00000000 -#define IFX_SSC_GPOCON_ISCSB4_POS 12 -#define IFX_SSC_GPOCON_IS_CSB4 0x00001000 -#define IFX_SSC_GPOCON_IS_GPO4 0x00000000 -#define IFX_SSC_GPOCON_ISCSB5_POS 13 -#define IFX_SSC_GPOCON_IS_CSB5 0x00002000 -#define IFX_SSC_GPOCON_IS_GPO5 0x00000000 -#define IFX_SSC_GPOCON_ISCSB6_POS 14 -#define IFX_SSC_GPOCON_IS_CSB6 0x00004000 -#define IFX_SSC_GPOCON_IS_GPO6 0x00000000 -#define IFX_SSC_GPOCON_ISCSB7_POS 15 -#define IFX_SSC_GPOCON_IS_CSB7 0x00008000 -#define IFX_SSC_GPOCON_IS_GPO7 0x00000000 -#define IFX_SSC_GPOCON_IS_CSB_ALL 0x0000FF00 -#define IFX_SSC_GPOCON_IS_GPO_ALL 0x00000000 - -/* GPOSTAT register */ -#define IFX_SSC_GPOSTAT_OUT0 0x00000001 -#define IFX_SSC_GPOSTAT_OUT1 0x00000002 -#define IFX_SSC_GPOSTAT_OUT2 0x00000004 -#define IFX_SSC_GPOSTAT_OUT3 0x00000008 -#define IFX_SSC_GPOSTAT_OUT4 0x00000010 -#define IFX_SSC_GPOSTAT_OUT5 0x00000020 -#define IFX_SSC_GPOSTAT_OUT6 0x00000040 -#define IFX_SSC_GPOSTAT_OUT7 0x00000080 -#define IFX_SSC_GPOSTAT_OUT_ALL 0x000000FF - -/* WHBGPOSTAT register */ -#define IFX_SSC_WHBGPOSTAT_CLROUT0_POS 0 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT0 0x00000001 -#define IFX_SSC_WHBGPOSTAT_CLROUT1_POS 1 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT1 0x00000002 -#define IFX_SSC_WHBGPOSTAT_CLROUT2_POS 2 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT2 0x00000004 -#define IFX_SSC_WHBGPOSTAT_CLROUT3_POS 3 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT3 0x00000008 -#define IFX_SSC_WHBGPOSTAT_CLROUT4_POS 4 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT4 0x00000010 -#define IFX_SSC_WHBGPOSTAT_CLROUT5_POS 5 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT5 0x00000020 -#define IFX_SSC_WHBGPOSTAT_CLROUT6_POS 6 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT6 0x00000040 -#define IFX_SSC_WHBGPOSTAT_CLROUT7_POS 7 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT7 0x00000080 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT_ALL 0x000000FF - -#define IFX_SSC_WHBGPOSTAT_OUT0_POS 0 -#define IFX_SSC_WHBGPOSTAT_OUT1_POS 1 -#define IFX_SSC_WHBGPOSTAT_OUT2_POS 2 -#define IFX_SSC_WHBGPOSTAT_OUT3_POS 3 -#define IFX_SSC_WHBGPOSTAT_OUT4_POS 4 -#define IFX_SSC_WHBGPOSTAT_OUT5_POS 5 -#define IFX_SSC_WHBGPOSTAT_OUT6_POS 6 -#define IFX_SSC_WHBGPOSTAT_OUT7_POS 7 - -#define IFX_SSC_WHBGPOSTAT_SETOUT0_POS 8 -#define IFX_SSC_WHBGPOSTAT_SET_OUT0 0x00000100 -#define IFX_SSC_WHBGPOSTAT_SETOUT1_POS 9 -#define IFX_SSC_WHBGPOSTAT_SET_OUT1 0x00000200 -#define IFX_SSC_WHBGPOSTAT_SETOUT2_POS 10 -#define IFX_SSC_WHBGPOSTAT_SET_OUT2 0x00000400 -#define IFX_SSC_WHBGPOSTAT_SETOUT3_POS 11 -#define IFX_SSC_WHBGPOSTAT_SET_OUT3 0x00000800 -#define IFX_SSC_WHBGPOSTAT_SETOUT4_POS 12 -#define IFX_SSC_WHBGPOSTAT_SET_OUT4 0x00001000 -#define IFX_SSC_WHBGPOSTAT_SETOUT5_POS 13 -#define IFX_SSC_WHBGPOSTAT_SET_OUT5 0x00002000 -#define IFX_SSC_WHBGPOSTAT_SETOUT6_POS 14 -#define IFX_SSC_WHBGPOSTAT_SET_OUT6 0x00004000 -#define IFX_SSC_WHBGPOSTAT_SETOUT7_POS 15 -#define IFX_SSC_WHBGPOSTAT_SET_OUT7 0x00008000 -#define IFX_SSC_WHBGPOSTAT_SET_OUT_ALL 0x0000FF00 - -/* SFCON register */ -#define IFX_SSC_SFCON_SF_ENABLE 0x00000001 -#define IFX_SSC_SFCON_SF_DISABLE 0x00000000 -#define IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE 0x00000004 -#define IFX_SSC_SFCON_FIR_DISABLE_BEFORE_PAUSE 0x00000000 -#define IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE 0x00000008 -#define IFX_SSC_SFCON_FIR_DISABLE_AFTER_PAUSE 0x00000000 -#define IFX_SSC_SFCON_DATA_LENGTH_MASK 0x0000FFF0 -#define IFX_SSC_SFCON_DATA_LENGTH_OFFSET 4 -#define IFX_SSC_SFCON_PAUSE_DATA_MASK 0x00030000 -#define IFX_SSC_SFCON_PAUSE_DATA_OFFSET 16 -#define IFX_SSC_SFCON_PAUSE_DATA_0 0x00000000 -#define IFX_SSC_SFCON_PAUSE_DATA_1 0x00010000 -#define IFX_SSC_SFCON_PAUSE_DATA_IDLE 0x00020000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_MASK 0x000C0000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET 18 -#define IFX_SSC_SFCON_PAUSE_CLOCK_0 0x00000000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_1 0x00040000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_IDLE 0x00080000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_RUN 0x000C0000 -#define IFX_SSC_SFCON_STOP_AFTER_PAUSE 0x00100000 -#define IFX_SSC_SFCON_CONTINUE_AFTER_PAUSE 0x00000000 -#define IFX_SSC_SFCON_PAUSE_LENGTH_MASK 0xFFC00000 -#define IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET 22 -#define IFX_SSC_SFCON_DATA_LENGTH_MAX 4096 -#define IFX_SSC_SFCON_PAUSE_LENGTH_MAX 1024 - -#define IFX_SSC_SFCON_EXTRACT_DATA_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET) -#define IFX_SSC_SFCON_EXTRACT_PAUSE_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) -#define IFX_SSC_SFCON_SET_DATA_LENGTH(value) ((value << IFX_SSC_SFCON_DATA_LENGTH_OFFSET) & IFX_SSC_SFCON_DATA_LENGTH_MASK) -#define IFX_SSC_SFCON_SET_PAUSE_LENGTH(value) ((value << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) - -/* SFSTAT register */ -#define IFX_SSC_SFSTAT_IN_DATA 0x00000001 -#define IFX_SSC_SFSTAT_IN_PAUSE 0x00000002 -#define IFX_SSC_SFSTAT_DATA_COUNT_MASK 0x0000FFF0 -#define IFX_SSC_SFSTAT_DATA_COUNT_OFFSET 4 -#define IFX_SSC_SFSTAT_PAUSE_COUNT_MASK 0xFFF00000 -#define IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET 20 - -#define IFX_SSC_SFSTAT_EXTRACT_DATA_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET) -#define IFX_SSC_SFSTAT_EXTRACT_PAUSE_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET) - -/* RXREQ register */ -#define IFX_SSC_RXREQ_RXCOUNT_MASK 0x0000FFFF -#define IFX_SSC_RXREQ_RXCOUNT_OFFSET 0 - -/* RXCNT register */ -#define IFX_SSC_RXCNT_TODO_MASK 0x0000FFFF -#define IFX_SSC_RXCNT_TODO_OFFSET 0 - -/* DMACON register */ -#define IFX_SSC_DMACON_RXON 0x00000001 -#define IFX_SSC_DMACON_RXOFF 0x00000000 -#define IFX_SSC_DMACON_TXON 0x00000002 -#define IFX_SSC_DMACON_TXOFF 0x00000000 -#define IFX_SSC_DMACON_DMAON 0x00000003 -#define IFX_SSC_DMACON_DMAOFF 0x00000000 -#define IFX_SSC_DMACON_CLASS_MASK 0x0000000C -#define IFX_SSC_DMACON_CLASS_OFFSET 2 - -/* register access macros */ -#define ifx_ssc_fstat_received_words(status) (status & 0x003F) -#define ifx_ssc_fstat_words_to_transmit(status) ((status & 0x3F00) >> 8) - -#define ifx_ssc_change_status(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_WHBSTATE)) -#define ifx_ssc_set_config(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_CON)) -#define ifx_ssc_get_config(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_CON)) -#define ifx_ssc_get_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_STATE)) -#define ifx_ssc_receive(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_RB)) -#define ifx_ssc_transmit(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_TB)) -#define ifx_ssc_fifo_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_FSTAT)) -#define ifx_ssc_set_baudrate(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_BR)) - -#define ifx_ssc_extract_rx_fifo_size(id) ((id & IFX_SSC_PERID_RXFS_MASK) >> IFX_SSC_PERID_RXFS_OFFSET) -#define ifx_ssc_extract_tx_fifo_size(id) ((id & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET) - -#endif diff --git a/target/linux/danube/files/include/asm-mips/mach-danube/irq.h b/target/linux/danube/files/include/asm-mips/mach-danube/irq.h deleted file mode 100644 index 7f1e7d3325..0000000000 --- a/target/linux/danube/files/include/asm-mips/mach-danube/irq.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __DANUBE_IRQ_H -#define __DANUBE_IRQ_H - -#define NR_IRQS 256 -#include_next <irq.h> - -#endif - diff --git a/target/linux/danube/image/Makefile b/target/linux/danube/image/Makefile deleted file mode 100644 index 41082982b9..0000000000 --- a/target/linux/danube/image/Makefile +++ /dev/null @@ -1,34 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -define Image/BuildKernel - $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma - mkimage -A mips -O linux -T kernel -a 0x80002000 -C lzma -e \ - 0x80002000 \ - -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \ - -d $(KDIR)/vmlinux.lzma $(KDIR)/uImage - - cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-uImage -endef - -define Image/Build/squashfs - cat $(KDIR)/uImage $(KDIR)/root.$(1) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image - $(call prepare_generic_squashfs,$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image) -endef - -define Image/Build/jffs2-64k - dd if=$(KDIR)/uImage of=$(KDIR)/uImage.$(1) bs=64k conv=sync - cat $(KDIR)/uImage.$(1) $(KDIR)/root.$(1) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image -endef - -define Image/Build - $(call Image/Build/$(1),$(1)) -endef - -$(eval $(call BuildImage)) diff --git a/target/linux/danube/patches/100-board.patch b/target/linux/danube/patches/100-board.patch deleted file mode 100644 index c73c4e7fdc..0000000000 --- a/target/linux/danube/patches/100-board.patch +++ /dev/null @@ -1,66 +0,0 @@ -Index: linux-2.6.23/arch/mips/Kconfig -=================================================================== ---- linux-2.6.23.orig/arch/mips/Kconfig 2007-10-16 22:12:19.000000000 +0200 -+++ linux-2.6.23/arch/mips/Kconfig 2007-10-16 22:12:21.000000000 +0200 -@@ -58,6 +58,17 @@ - select SYS_SUPPORTS_LITTLE_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ - -+config DANUBE -+ bool "Danube support" -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select SYS_HAS_CPU_MIPS32_R1 -+ select HAVE_STD_PC_SERIAL_PORT -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_HAS_EARLY_PRINTK -+ select HW_HAS_PCI -+ - config MACH_DECSTATION - bool "DECstations" - select BOOT_ELF32 -@@ -605,6 +615,7 @@ - source "arch/mips/tx4927/Kconfig" - source "arch/mips/tx4938/Kconfig" - source "arch/mips/vr41xx/Kconfig" -+source "arch/mips/danube/Kconfig" - - endmenu - -Index: linux-2.6.23/arch/mips/Makefile -=================================================================== ---- linux-2.6.23.orig/arch/mips/Makefile 2007-10-16 22:12:21.000000000 +0200 -+++ linux-2.6.23/arch/mips/Makefile 2007-10-16 22:12:21.000000000 +0200 -@@ -276,6 +276,13 @@ - cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/mach-cobalt - load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000 - -+# -+# Infineon DANUBE -+# -+core-$(CONFIG_DANUBE) += arch/mips/danube/ -+cflags-$(CONFIG_DANUBE) += -Iinclude/asm-mips/mach-danube -+load-$(CONFIG_DANUBE) += 0xffffffff80002000 -+ - # - # DECstation family - # -Index: linux-2.6.23/include/asm-mips/bootinfo.h -=================================================================== ---- linux-2.6.23.orig/include/asm-mips/bootinfo.h 2007-10-16 22:12:19.000000000 +0200 -+++ linux-2.6.23/include/asm-mips/bootinfo.h 2007-10-16 22:12:21.000000000 +0200 -@@ -208,6 +208,13 @@ - #define MACH_GROUP_WINDRIVER 28 /* Windriver boards */ - #define MACH_WRPPMC 1 - -+/* -+ * Valid machtype for group ATHEROS -+ */ -+#define MACH_GROUP_DANUBE 29 -+#define MACH_INFINEON_DANUBE 0 -+ -+ - #define CL_SIZE COMMAND_LINE_SIZE - - const char *get_system_type(void); diff --git a/target/linux/danube/patches/110-drivers.patch b/target/linux/danube/patches/110-drivers.patch deleted file mode 100644 index 35a2024bb6..0000000000 --- a/target/linux/danube/patches/110-drivers.patch +++ /dev/null @@ -1,93 +0,0 @@ -Index: linux-2.6.23/drivers/serial/Kconfig -=================================================================== ---- linux-2.6.23.orig/drivers/serial/Kconfig 2007-12-13 20:41:42.000000000 +0100 -+++ linux-2.6.23/drivers/serial/Kconfig 2007-12-13 20:41:57.000000000 +0100 -@@ -1259,4 +1259,10 @@ - Currently, only 8250 compatible ports are supported, but - others can easily be added. - -+config SERIAL_DANUBE -+ bool "Danube serial driver" -+ depends on DANUBE -+ help -+ Driver for the danubes built in ASC hardware -+ - endmenu -Index: linux-2.6.23/drivers/serial/Makefile -=================================================================== ---- linux-2.6.23.orig/drivers/serial/Makefile 2007-12-13 20:41:42.000000000 +0100 -+++ linux-2.6.23/drivers/serial/Makefile 2007-12-13 20:41:57.000000000 +0100 -@@ -64,3 +64,4 @@ - obj-$(CONFIG_SERIAL_NETX) += netx-serial.o - obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o - obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o -+obj-$(CONFIG_SERIAL_DANUBE) += danube_asc.o -Index: linux-2.6.23/drivers/mtd/maps/Makefile -=================================================================== ---- linux-2.6.23.orig/drivers/mtd/maps/Makefile 2007-12-13 20:41:42.000000000 +0100 -+++ linux-2.6.23/drivers/mtd/maps/Makefile 2007-12-13 20:41:57.000000000 +0100 -@@ -71,3 +71,4 @@ - obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o - obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o - obj-$(CONFIG_MTD_TQM834x) += tqm834x.o -+obj-$(CONFIG_MTD_DANUBE) += danube.o -Index: linux-2.6.23/drivers/net/Kconfig -=================================================================== ---- linux-2.6.23.orig/drivers/net/Kconfig 2007-12-13 20:41:42.000000000 +0100 -+++ linux-2.6.23/drivers/net/Kconfig 2007-12-13 20:41:57.000000000 +0100 -@@ -339,6 +339,18 @@ - - source "drivers/net/arm/Kconfig" - -+config DANUBE_MII0 -+ tristate "Infineon Danube eth0 driver" -+ depends on DANUBE -+ help -+ Support for the MII0 inside the Danube SOC -+ -+config DANUBE_MII1 -+ tristate "Infineon Danube eth1 driver" -+ depends on DANUBE -+ help -+ Support for the MII1 inside the Danube SOC -+ - config AX88796 - tristate "ASIX AX88796 NE2000 clone support" - depends on ARM || MIPS -Index: linux-2.6.23/drivers/net/Makefile -=================================================================== ---- linux-2.6.23.orig/drivers/net/Makefile 2007-12-13 20:41:42.000000000 +0100 -+++ linux-2.6.23/drivers/net/Makefile 2007-12-13 20:41:57.000000000 +0100 -@@ -208,6 +208,7 @@ - obj-$(CONFIG_FEC_8XX) += fec_8xx/ - obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o - obj-$(CONFIG_MLX4_CORE) += mlx4/ -+obj-$(CONFIG_DANUBE_MII0) += danube_mii0.o - - obj-$(CONFIG_MACB) += macb.o - -Index: linux-2.6.23/drivers/char/watchdog/Makefile -=================================================================== ---- linux-2.6.23.orig/drivers/char/watchdog/Makefile 2007-12-13 20:41:42.000000000 +0100 -+++ linux-2.6.23/drivers/char/watchdog/Makefile 2007-12-13 20:41:57.000000000 +0100 -@@ -90,6 +90,7 @@ - obj-$(CONFIG_INDYDOG) += indydog.o - obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o - obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o -+obj-$(CONFIG_DANUBE_WDT) += danube_wdt.o - - # PARISC Architecture - -Index: linux-2.6.23/drivers/char/Makefile -=================================================================== ---- linux-2.6.23.orig/drivers/char/Makefile 2007-12-13 20:41:42.000000000 +0100 -+++ linux-2.6.23/drivers/char/Makefile 2007-12-14 22:41:07.000000000 +0100 -@@ -135,3 +135,8 @@ - rm $@.tmp - - endif -+ -+obj-$(CONFIG_DANUBE_LED) += danube_led.o -+obj-$(CONFIG_DANUBE_GPIO) += danube_gpio.o -+obj-$(CONFIG_DANUBE_SSC) += danube_ssc.o -+obj-$(CONFIG_DANUBE_EEPROM) += danube_eeprom.o diff --git a/target/linux/danube/patches/160-cfi-swap.patch b/target/linux/danube/patches/160-cfi-swap.patch deleted file mode 100644 index ca70928713..0000000000 --- a/target/linux/danube/patches/160-cfi-swap.patch +++ /dev/null @@ -1,15 +0,0 @@ -Index: linux-2.6.23/drivers/mtd/chips/cfi_cmdset_0002.c -=================================================================== ---- linux-2.6.23.orig/drivers/mtd/chips/cfi_cmdset_0002.c 2007-11-02 23:02:29.000000000 +0100 -+++ linux-2.6.23/drivers/mtd/chips/cfi_cmdset_0002.c 2007-11-02 23:07:15.000000000 +0100 -@@ -1007,7 +1007,9 @@ - int ret = 0; - map_word oldd; - int retry_cnt = 0; -- -+#ifdef CONFIG_DANUBE -+ adr ^= 2; -+#endif - adr += chip->start; - - spin_lock(chip->mutex); diff --git a/target/linux/danube/series b/target/linux/danube/series deleted file mode 100644 index 19bcf21175..0000000000 --- a/target/linux/danube/series +++ /dev/null @@ -1,88 +0,0 @@ -Makefile -base-files/etc/config/network -config-2.6.23 -files/arch/mips/danube/Kconfig -files/arch/mips/danube/Makefile -files/arch/mips/danube/built-in.o -files/arch/mips/danube/dma-core.c -files/arch/mips/danube/dma-core.h -files/arch/mips/danube/dma-core.o -files/arch/mips/danube/interrupt.c -files/arch/mips/danube/interrupt.o -files/arch/mips/danube/kgdb_serial.c -files/arch/mips/danube/pci.c -files/arch/mips/danube/prom.c -files/arch/mips/danube/prom.o -files/arch/mips/danube/reset.c -files/arch/mips/danube/reset.o -files/arch/mips/danube/setup.c -files/arch/mips/danube/setup.o -files/drivers/mtd/maps/danube.c -files/drivers/serial/danube_asc.c -files/drivers/serial/danube_asc.c~ -files/drivers/serial/danube_asc.o -files/include/asm-mips/danube/adm6996.h -files/include/asm-mips/danube/atm_mib.h -files/include/asm-mips/danube/danube.h -files/include/asm-mips/danube/danube_bcu.h -files/include/asm-mips/danube/danube_cgu.h -files/include/asm-mips/danube/danube_deu.h -files/include/asm-mips/danube/danube_deu_structs.h -files/include/asm-mips/danube/danube_dma.h -files/include/asm-mips/danube/danube_eth2.h -files/include/asm-mips/danube/danube_eth2_fw.h -files/include/asm-mips/danube/danube_eth2_fw_with_dplus.h -files/include/asm-mips/danube/danube_eth2_fw_with_dplus_sb.h -files/include/asm-mips/danube/danube_eth_d2.h -files/include/asm-mips/danube/danube_eth_fw_d2.h -files/include/asm-mips/danube/danube_gpio.h -files/include/asm-mips/danube/danube_gptu.h -files/include/asm-mips/danube/danube_icu.h -files/include/asm-mips/danube/danube_led.h -files/include/asm-mips/danube/danube_mei.h -files/include/asm-mips/danube/danube_mei_app.h -files/include/asm-mips/danube/danube_mei_app_ioctl.h -files/include/asm-mips/danube/danube_mei_bsp.h -files/include/asm-mips/danube/danube_mei_ioctl.h -files/include/asm-mips/danube/danube_mei_linux.h -files/include/asm-mips/danube/danube_misc.h -files/include/asm-mips/danube/danube_pmu.h -files/include/asm-mips/danube/danube_ppa_api.h -files/include/asm-mips/danube/danube_ppa_eth_fw_d2.h -files/include/asm-mips/danube/danube_ppa_eth_fw_d3.h -files/include/asm-mips/danube/danube_ppa_hook.h -files/include/asm-mips/danube/danube_ppa_ppe_d3_hal.h -files/include/asm-mips/danube/danube_ppa_ppe_hal.h -files/include/asm-mips/danube/danube_ppa_stack_al.h -files/include/asm-mips/danube/danube_ppe.h -files/include/asm-mips/danube/danube_ppe_fw.h -files/include/asm-mips/danube/danube_ppe_fw_fix_for_pci.h -files/include/asm-mips/danube/danube_rcu.h -files/include/asm-mips/danube/danube_sdio_controller.h -files/include/asm-mips/danube/danube_sdio_controller_registers.h -files/include/asm-mips/danube/danube_ssc.h -files/include/asm-mips/danube/danube_sw.h -files/include/asm-mips/danube/danube_wdt.h -files/include/asm-mips/danube/danube_ws.h -files/include/asm-mips/danube/emulation.h -files/include/asm-mips/danube/ifx_mps.h -files/include/asm-mips/danube/ifx_peripheral_definitions.h -files/include/asm-mips/danube/ifx_sd_card.h -files/include/asm-mips/danube/ifx_serial.h -files/include/asm-mips/danube/ifx_ssc.h -files/include/asm-mips/danube/ifx_ssc_defines.h -files/include/asm-mips/danube/ifx_types.h -files/include/asm-mips/danube/infineon_sdio.h -files/include/asm-mips/danube/infineon_sdio_card.h -files/include/asm-mips/danube/infineon_sdio_cmds.h -files/include/asm-mips/danube/infineon_sdio_controller.h -files/include/asm-mips/danube/irq.h -files/include/asm-mips/danube/memcopy.h -files/include/asm-mips/danube/mps.h -files/include/asm-mips/danube/port.h -files/include/asm-mips/danube/ppe.h -files/include/asm-mips/danube/serial.h -files/include/asm-mips/mach-danube/irq.h -image/Makefile -patches/100-board.patch -patches/110-drivers.patch |