diff options
Diffstat (limited to 'target/linux')
17 files changed, 0 insertions, 899 deletions
diff --git a/target/linux/ramips/patches-2.6.39/001-mips-add-cp0-compare-irq-function.patch b/target/linux/ramips/patches-2.6.39/001-mips-add-cp0-compare-irq-function.patch deleted file mode 100644 index 71b0b3f3e2..0000000000 --- a/target/linux/ramips/patches-2.6.39/001-mips-add-cp0-compare-irq-function.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/arch/mips/kernel/traps.c -+++ b/arch/mips/kernel/traps.c -@@ -54,6 +54,7 @@ - #include <asm/types.h> - #include <asm/stacktrace.h> - #include <asm/uasm.h> -+#include <asm/time.h> - - extern void check_wait(void); - extern asmlinkage void r4k_wait(void); -@@ -1576,6 +1577,8 @@ void __cpuinit per_cpu_trap_init(void) - if (cpu_has_mips_r2) { - cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP; - cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7; -+ if (get_c0_compare_irq) -+ cp0_compare_irq = get_c0_compare_irq(); - cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7; - if (cp0_perfcount_irq == cp0_compare_irq) - cp0_perfcount_irq = -1; ---- a/arch/mips/include/asm/time.h -+++ b/arch/mips/include/asm/time.h -@@ -52,6 +52,7 @@ extern int (*perf_irq)(void); - */ - #ifdef CONFIG_CEVT_R4K_LIB - extern unsigned int __weak get_c0_compare_int(void); -+extern unsigned int __weak get_c0_compare_irq(void); - extern int r4k_clockevent_init(void); - #endif - diff --git a/target/linux/ramips/patches-2.6.39/002-fix-occassional-kernel-hangs.patch b/target/linux/ramips/patches-2.6.39/002-fix-occassional-kernel-hangs.patch deleted file mode 100644 index 8150ee4810..0000000000 --- a/target/linux/ramips/patches-2.6.39/002-fix-occassional-kernel-hangs.patch +++ /dev/null @@ -1,104 +0,0 @@ -From patchwork Tue Nov 8 14:59:01 2011 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: MIPS: Kernel hangs occasionally during boot. -Date: Tue, 08 Nov 2011 13:59:01 -0000 -From: Al Cooper <alcooperx@gmail.com> -X-Patchwork-Id: 2911 -Message-Id: <1320764341-4275-1-git-send-email-alcooperx@gmail.com> -To: ralf@linux-mips.org, linux-mips@linux-mips.org, - linux-kernel@vger.kernel.org -Cc: "Al Cooper" <alcooperx@gmail.com> - -The Kernel hangs occasionally during boot after -"Calibrating delay loop..". This is caused by the -c0_compare_int_usable() routine in cevt-r4k.c returning false which -causes the system to disable the timer and hang later. The false -return happens because the routine is using a series of four calls to -irq_disable_hazard() as a delay while it waits for the timer changes -to propagate to the cp0 cause register. On newer MIPS cores, like the 74K, -the series of irq_disable_hazard() calls turn into ehb instructions and -can take as little as a few clock ticks for all 4 instructions. This -is not enough of a delay, so the routine thinks the timer is not working. -This fix uses up to a max number of cycle counter ticks for the delay -and uses back_to_back_c0_hazard() instead of irq_disable_hazard() to -handle the hazard condition between cp0 writes and cp0 reads. - -Signed-off-by: Al Cooper <alcooperx@gmail.com> - ---- -arch/mips/kernel/cevt-r4k.c | 38 +++++++++++++++++++------------------- - 1 files changed, 19 insertions(+), 19 deletions(-) - ---- a/arch/mips/kernel/cevt-r4k.c -+++ b/arch/mips/kernel/cevt-r4k.c -@@ -103,19 +103,10 @@ static int c0_compare_int_pending(void) - - /* - * Compare interrupt can be routed and latched outside the core, -- * so a single execution hazard barrier may not be enough to give -- * it time to clear as seen in the Cause register. 4 time the -- * pipeline depth seems reasonably conservative, and empirically -- * works better in configurations with high CPU/bus clock ratios. -+ * so wait up to worst case number of cycle counter ticks for timer interrupt -+ * changes to propagate to the cause register. - */ -- --#define compare_change_hazard() \ -- do { \ -- irq_disable_hazard(); \ -- irq_disable_hazard(); \ -- irq_disable_hazard(); \ -- irq_disable_hazard(); \ -- } while (0) -+#define COMPARE_INT_SEEN_TICKS 50 - - int c0_compare_int_usable(void) - { -@@ -126,8 +117,12 @@ int c0_compare_int_usable(void) - * IP7 already pending? Try to clear it by acking the timer. - */ - if (c0_compare_int_pending()) { -- write_c0_compare(read_c0_count()); -- compare_change_hazard(); -+ cnt = read_c0_count(); -+ write_c0_compare(cnt); -+ back_to_back_c0_hazard(); -+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) -+ if (!c0_compare_int_pending()) -+ break; - if (c0_compare_int_pending()) - return 0; - } -@@ -136,7 +131,7 @@ int c0_compare_int_usable(void) - cnt = read_c0_count(); - cnt += delta; - write_c0_compare(cnt); -- compare_change_hazard(); -+ back_to_back_c0_hazard(); - if ((int)(read_c0_count() - cnt) < 0) - break; - /* increase delta if the timer was already expired */ -@@ -145,12 +140,17 @@ int c0_compare_int_usable(void) - while ((int)(read_c0_count() - cnt) <= 0) - ; /* Wait for expiry */ - -- compare_change_hazard(); -+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) -+ if (c0_compare_int_pending()) -+ break; - if (!c0_compare_int_pending()) - return 0; -- -- write_c0_compare(read_c0_count()); -- compare_change_hazard(); -+ cnt = read_c0_count(); -+ write_c0_compare(cnt); -+ back_to_back_c0_hazard(); -+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) -+ if (!c0_compare_int_pending()) -+ break; - if (c0_compare_int_pending()) - return 0; - diff --git a/target/linux/ramips/patches-2.6.39/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch b/target/linux/ramips/patches-2.6.39/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch deleted file mode 100644 index 93062be849..0000000000 --- a/target/linux/ramips/patches-2.6.39/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -1631,7 +1631,7 @@ static int __xipram do_erase_chip(struct - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) -+ if (chip_good(map, adr, map_word_ff(map))) - break; - - if (time_after(jiffies, timeo)) { -@@ -1719,7 +1719,7 @@ static int __xipram do_erase_oneblock(st - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) { -+ if (chip_good(map, adr, map_word_ff(map))) { - xip_enable(map, chip, adr); - break; - } diff --git a/target/linux/ramips/patches-2.6.39/011-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ramips/patches-2.6.39/011-mtd-cfi_cmdset_0002-force-word-write.patch deleted file mode 100644 index b6100ba253..0000000000 --- a/target/linux/ramips/patches-2.6.39/011-mtd-cfi_cmdset_0002-force-word-write.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -39,7 +39,7 @@ - #include <linux/mtd/xip.h> - - #define AMD_BOOTLOC_BUG --#define FORCE_WORD_WRITE 0 -+#define FORCE_WORD_WRITE 1 - - #define MAX_WORD_RETRIES 3 - -@@ -50,7 +50,9 @@ - - static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); - static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#if !FORCE_WORD_WRITE - static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#endif - static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); - static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); - static void cfi_amdstd_sync (struct mtd_info *); -@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m - } - #endif - -+#if !FORCE_WORD_WRITE - static void fixup_use_write_buffers(struct mtd_info *mtd) - { - struct map_info *map = mtd->priv; -@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru - mtd->write = cfi_amdstd_write_buffers; - } - } -+#endif /* !FORCE_WORD_WRITE */ - - /* Atmel chips don't use the same PRI format as AMD chips */ - static void fixup_convert_atmel_pri(struct mtd_info *mtd) -@@ -1377,6 +1381,7 @@ static int cfi_amdstd_write_words(struct - /* - * FIXME: interleaved mode not tested, and probably not supported! - */ -+#if !FORCE_WORD_WRITE - static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, - unsigned long adr, const u_char *buf, - int len) -@@ -1487,7 +1492,6 @@ static int __xipram do_write_buffer(stru - return ret; - } - -- - static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) - { -@@ -1566,6 +1570,7 @@ static int cfi_amdstd_write_buffers(stru - - return 0; - } -+#endif /* !FORCE_WORD_WRITE */ - - - /* diff --git a/target/linux/ramips/patches-2.6.39/100-mips-ralink-core.patch b/target/linux/ramips/patches-2.6.39/100-mips-ralink-core.patch deleted file mode 100644 index 4214b4f0d7..0000000000 --- a/target/linux/ramips/patches-2.6.39/100-mips-ralink-core.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -84,6 +84,9 @@ config ATH79 - help - Support for the Atheros AR71XX/AR724X/AR913X SoCs. - -+config MIPS_RALINK -+ bool "Ralink MIPS SoC based boards" -+ - config BCM47XX - bool "Broadcom BCM47XX based boards" - select CEVT_R4K -@@ -745,6 +748,7 @@ source "arch/mips/jazz/Kconfig" - source "arch/mips/jz4740/Kconfig" - source "arch/mips/lasat/Kconfig" - source "arch/mips/pmc-sierra/Kconfig" -+source "arch/mips/ralink/Kconfig" - source "arch/mips/powertv/Kconfig" - source "arch/mips/sgi-ip27/Kconfig" - source "arch/mips/sibyte/Kconfig" -@@ -1102,7 +1106,7 @@ config BOOT_ELF32 - - config MIPS_L1_CACHE_SHIFT - int -- default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL -+ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || RALINK_RT288X - default "6" if MIPS_CPU_SCACHE - default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON - default "5" ---- a/arch/mips/Kbuild.platforms -+++ b/arch/mips/Kbuild.platforms -@@ -19,6 +19,7 @@ platforms += pmc-sierra - platforms += pnx833x - platforms += pnx8550 - platforms += powertv -+platforms += ralink - platforms += rb532 - platforms += sgi-ip22 - platforms += sgi-ip27 diff --git a/target/linux/ramips/patches-2.6.39/101-rt288x_serial_driver_hack.patch b/target/linux/ramips/patches-2.6.39/101-rt288x_serial_driver_hack.patch deleted file mode 100644 index 07fa6632e7..0000000000 --- a/target/linux/ramips/patches-2.6.39/101-rt288x_serial_driver_hack.patch +++ /dev/null @@ -1,91 +0,0 @@ ---- a/drivers/tty/serial/8250.c -+++ b/drivers/tty/serial/8250.c -@@ -305,9 +305,9 @@ static const struct serial8250_config ua - }, - }; - --#if defined(CONFIG_MIPS_ALCHEMY) -+#if defined(CONFIG_MIPS_ALCHEMY) || defined (CONFIG_SERIAL_8250_RT288X) - --/* Au1x00 UART hardware has a weird register layout */ -+/* Au1x00 and RT288x UART hardware has a weird register layout */ - static const u8 au_io_in_map[] = { - [UART_RX] = 0, - [UART_IER] = 2, -@@ -597,8 +597,8 @@ static inline void _serial_dl_write(stru - serial_outp(up, UART_DLM, value >> 8 & 0xff); - } - --#if defined(CONFIG_MIPS_ALCHEMY) --/* Au1x00 haven't got a standard divisor latch */ -+#if defined(CONFIG_MIPS_ALCHEMY) || defined (CONFIG_SERIAL_8250_RT288X) -+/* Au1x00 and RT288x haven't got a standard divisor latch */ - static int serial_dl_read(struct uart_8250_port *up) - { - if (up->port.iotype == UPIO_AU) -@@ -805,22 +805,19 @@ static int size_fifo(struct uart_8250_po - */ - static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p) - { -- unsigned char old_dll, old_dlm, old_lcr; -+ unsigned char old_lcr; -+ unsigned int old_dl; - unsigned int id; - - old_lcr = serial_inp(p, UART_LCR); - serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_A); - -- old_dll = serial_inp(p, UART_DLL); -- old_dlm = serial_inp(p, UART_DLM); -+ old_dl = serial_dl_read(p); - -- serial_outp(p, UART_DLL, 0); -- serial_outp(p, UART_DLM, 0); -+ serial_dl_write(p, 0); -+ id = serial_dl_read(p); - -- id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8; -- -- serial_outp(p, UART_DLL, old_dll); -- serial_outp(p, UART_DLM, old_dlm); -+ serial_dl_write(p, old_dl); - serial_outp(p, UART_LCR, old_lcr); - - return id; -@@ -946,7 +943,7 @@ static int broken_efr(struct uart_8250_p - /* - * Exar ST16C2550 "A2" devices incorrectly detect as - * having an EFR, and report an ID of 0x0201. See -- * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html -+ * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html - */ - if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) - return 1; ---- a/drivers/tty/serial/Kconfig -+++ b/drivers/tty/serial/Kconfig -@@ -258,6 +258,14 @@ config SERIAL_8250_ACORN - system, say Y to this option. The driver can handle 1, 2, or 3 port - cards. If unsure, say N. - -+config SERIAL_8250_RT288X -+ bool "Ralink RT288x/RT305x/RT3883 serial port support" -+ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X || SOC_RT3883) -+ help -+ If you have a Ralink RT288x/RT305x SoC based board and want to use the -+ serial port, say Y to this option. The driver can handle up to 2 serial -+ ports. If unsure, say N. -+ - config SERIAL_8250_RM9K - bool "Support for MIPS RM9xxx integrated serial port" - depends on SERIAL_8250 != n && SERIAL_RM9000 ---- a/include/linux/serial_core.h -+++ b/include/linux/serial_core.h -@@ -311,7 +311,7 @@ struct uart_port { - #define UPIO_HUB6 (1) - #define UPIO_MEM (2) - #define UPIO_MEM32 (3) --#define UPIO_AU (4) /* Au1x00 type IO */ -+#define UPIO_AU (4) /* Au1x00 and RT288x type IO */ - #define UPIO_TSI (5) /* Tsi108/109 type IO */ - #define UPIO_DWAPB (6) /* DesignWare APB UART */ - #define UPIO_RM9000 (7) /* RM9000 type IO */ diff --git a/target/linux/ramips/patches-2.6.39/102-rt288x-pci-driver-hook.patch b/target/linux/ramips/patches-2.6.39/102-rt288x-pci-driver-hook.patch deleted file mode 100644 index d2056c6465..0000000000 --- a/target/linux/ramips/patches-2.6.39/102-rt288x-pci-driver-hook.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capc - obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o - obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o - obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o -+obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o - - ifdef CONFIG_PCI_MSI - obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o diff --git a/target/linux/ramips/patches-2.6.39/103-ethernet.patch b/target/linux/ramips/patches-2.6.39/103-ethernet.patch deleted file mode 100644 index a5a9ab4241..0000000000 --- a/target/linux/ramips/patches-2.6.39/103-ethernet.patch +++ /dev/null @@ -1,30 +0,0 @@ ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -494,6 +494,17 @@ config MIPS_AU1X00_ENET - If you have an Alchemy Semi AU1X00 based system - say Y. Otherwise, say N. - -+config MIPS_RAMIPS_NET -+ tristate "Ethernet driver for rt288x/rt305x" -+ depends on MIPS_RALINK -+ select PHYLIB if (SOC_RT288X || SOC_RT3883) -+ help -+ This driver supports the etehrnet mac inside the ralink wisocs -+ -+config RAMIPS_ETH_DEBUG -+ bool "Enable debug messages in the Ralink ethernet driver" -+ depends on MIPS_RAMIPS_NET -+ - config SGI_IOC3_ETH - bool "SGI IOC3 Ethernet" - depends on PCI && SGI_IP27 ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -227,6 +227,7 @@ obj-$(CONFIG_KORINA) += korina.o - obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o - obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o - obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o -+obj-$(CONFIG_MIPS_RAMIPS_NET) += ramips.o - obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o - obj-$(CONFIG_DECLANCE) += declance.o - obj-$(CONFIG_ATARILANCE) += atarilance.o diff --git a/target/linux/ramips/patches-2.6.39/104-ramips-watchdog-driver.patch b/target/linux/ramips/patches-2.6.39/104-ramips-watchdog-driver.patch deleted file mode 100644 index 854fe0a8a5..0000000000 --- a/target/linux/ramips/patches-2.6.39/104-ramips-watchdog-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -990,6 +990,13 @@ config BCM63XX_WDT - To compile this driver as a loadable module, choose M here. - The module will be called bcm63xx_wdt. - -+config RAMIPS_WDT -+ tristate "Ralink RT288X/RT305X Watchdog Timer" -+ depends on SOC_RT288X || SOC_RT305X || SOC_RT3883 -+ help -+ Hardware driver for the built-in watchdog timer on the -+ Ralink RT288X/RT305X SoCs. -+ - # PARISC Architecture - - # POWERPC Architecture ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -123,6 +123,7 @@ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o - obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o - octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o -+obj-$(CONFIG_RAMIPS_WDT) += ramips_wdt.o - - # PARISC Architecture - diff --git a/target/linux/ramips/patches-2.6.39/105-ramips-spi-driver.patch b/target/linux/ramips/patches-2.6.39/105-ramips-spi-driver.patch deleted file mode 100644 index 777a5258a6..0000000000 --- a/target/linux/ramips/patches-2.6.39/105-ramips-spi-driver.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -310,6 +310,12 @@ config SPI_PXA2XX - config SPI_PXA2XX_PCI - def_bool SPI_PXA2XX && X86_32 && PCI - -+config SPI_RAMIPS -+ tristate "Ralink RT288x/RT305x SPI Controller" -+ depends on (SOC_RT288X || SOC_RT305X) && SPI_MASTER -+ help -+ This selects a driver for the Ralink RT288x/RT305x SPI Controller. -+ - config SPI_S3C24XX - tristate "Samsung S3C24XX series SPI" - depends on ARCH_S3C2410 && EXPERIMENTAL ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -42,6 +42,7 @@ obj-$(CONFIG_SPI_FSL_LIB) += spi_fsl_li - obj-$(CONFIG_SPI_FSL_ESPI) += spi_fsl_espi.o - obj-$(CONFIG_SPI_FSL_SPI) += spi_fsl_spi.o - obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o -+obj-$(CONFIG_SPI_RAMIPS) += ramips_spi.o - obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o - obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o - obj-$(CONFIG_SPI_S3C64XX) += spi_s3c64xx.o diff --git a/target/linux/ramips/patches-2.6.39/105-usb_dwc_otg.patch b/target/linux/ramips/patches-2.6.39/105-usb_dwc_otg.patch deleted file mode 100644 index 1840c9d75a..0000000000 --- a/target/linux/ramips/patches-2.6.39/105-usb_dwc_otg.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- a/drivers/usb/Kconfig -+++ b/drivers/usb/Kconfig -@@ -164,4 +164,6 @@ source "drivers/usb/gadget/Kconfig" - - source "drivers/usb/otg/Kconfig" - -+source "drivers/usb/dwc_otg/Kconfig" -+ - endif # USB_SUPPORT ---- a/drivers/usb/Makefile -+++ b/drivers/usb/Makefile -@@ -45,3 +45,4 @@ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early - - obj-$(CONFIG_USB_ATM) += atm/ - obj-$(CONFIG_USB_SPEEDTOUCH) += atm/ -+obj-$(CONFIG_DWC_OTG) += dwc_otg/ diff --git a/target/linux/ramips/patches-2.6.39/106-rt3883-pci-support.patch b/target/linux/ramips/patches-2.6.39/106-rt3883-pci-support.patch deleted file mode 100644 index 59ed6edca6..0000000000 --- a/target/linux/ramips/patches-2.6.39/106-rt3883-pci-support.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -56,6 +56,7 @@ obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o - obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o - obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o - obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o -+obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o - - ifdef CONFIG_PCI_MSI - obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o diff --git a/target/linux/ramips/patches-2.6.39/200-rt3883-ehci-glue.patch b/target/linux/ramips/patches-2.6.39/200-rt3883-ehci-glue.patch deleted file mode 100644 index d01bd4702c..0000000000 --- a/target/linux/ramips/patches-2.6.39/200-rt3883-ehci-glue.patch +++ /dev/null @@ -1,32 +0,0 @@ ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -202,6 +202,15 @@ config USB_CNS3XXX_EHCI - It is needed for high-speed (480Mbit/sec) USB 2.0 device - support. - -+config USB_EHCI_RT3883 -+ bool "EHCI support for Ralink RT3662/RT3883 SoCs" -+ depends on USB_EHCI_HCD && SOC_RT3883 -+ select USB_EHCI_ROOT_HUB_TT -+ default y -+ ---help--- -+ Enables support for the built-in EHCI controller present -+ on the Ralink RT3883 SoC. -+ - config USB_OXU210HP_HCD - tristate "OXU210HP HCD support" - depends on USB ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -1267,6 +1267,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER tegra_ehci_driver - #endif - -+#ifdef CONFIG_USB_EHCI_RT3883 -+#include "ehci-rt3883.c" -+#define PLATFORM_DRIVER ehci_rt3883_driver -+#endif -+ - #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ - !defined(XILINX_OF_PLATFORM_DRIVER) diff --git a/target/linux/ramips/patches-2.6.39/201-rt3883-ohci-glue.patch b/target/linux/ramips/patches-2.6.39/201-rt3883-ohci-glue.patch deleted file mode 100644 index 1415245364..0000000000 --- a/target/linux/ramips/patches-2.6.39/201-rt3883-ohci-glue.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -296,6 +296,14 @@ config USB_OHCI_HCD_OMAP3 - Enables support for the on-chip OHCI controller on - OMAP3 and later chips. - -+config USB_OHCI_RT3883 -+ bool "USB OHCI support for the Ralink RT3883 SoCs" -+ depends on USB_OHCI_HCD && SOC_RT3883 -+ default y -+ help -+ Enables support for the built-in OHCI controller present on the -+ Ralink RT3883 SoC. -+ - config USB_OHCI_HCD_PPC_SOC - bool "OHCI support for on-chip PPC USB controller" - depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) ---- a/drivers/usb/host/ohci-hcd.c -+++ b/drivers/usb/host/ohci-hcd.c -@@ -1107,6 +1107,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver - #endif - -+#ifdef CONFIG_USB_OHCI_RT3883 -+#include "ohci-rt3883.c" -+#define PLATFORM_DRIVER ohci_rt3883_driver -+#endif -+ - #if !defined(PCI_DRIVER) && \ - !defined(PLATFORM_DRIVER) && \ - !defined(OMAP1_PLATFORM_DRIVER) && \ diff --git a/target/linux/ramips/rt288x/config-2.6.39 b/target/linux/ramips/rt288x/config-2.6.39 deleted file mode 100644 index a84d5cac0b..0000000000 --- a/target/linux/ramips/rt288x/config-2.6.39 +++ /dev/null @@ -1,120 +0,0 @@ -# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_ATH79 is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CSRC_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_HARDIRQS=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_WORK=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=m -CONFIG_IMAGE_CMDLINE_HACK=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IP17XX_PHY=y -CONFIG_IRQ_CPU=y -# CONFIG_LEDS_GPIO is not set -CONFIG_MACH_NO_WESTBRIDGE=y -# CONFIG_MII is not set -# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set -CONFIG_MIPS=y -CONFIG_MIPS_L1_CACHE_SHIFT=4 -CONFIG_MIPS_MACHINE=y -CONFIG_MIPS_MT_DISABLED=y -CONFIG_MIPS_RALINK=y -CONFIG_MIPS_RAMIPS_NET=y -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -# CONFIG_PREEMPT_RCU is not set -# CONFIG_QUOTACTL is not set -CONFIG_RALINK_DEV_GPIO_BUTTONS=y -CONFIG_RALINK_DEV_GPIO_LEDS=y -CONFIG_RALINK_RT288X=y -# CONFIG_RALINK_RT305X is not set -# CONFIG_RALINK_RT3883 is not set -# CONFIG_RAMIPS_ETH_DEBUG is not set -CONFIG_RAMIPS_WDT=y -CONFIG_RT288X_MACH_F5D8235_V1=y -CONFIG_RT288X_MACH_RT_N15=y -CONFIG_RT288X_MACH_V11ST_FE=y -CONFIG_RT288X_MACH_WLI_TX4_AG300N=y -CONFIG_RT288X_MACH_WZR_AGL300NH=y -CONFIG_RTL8366S_PHY=y -CONFIG_RTL8366_SMI=y -# CONFIG_SCSI_DMA is not set -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RT288X=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -CONFIG_SOC_RT288X=y -CONFIG_SWCONFIG=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_USB_SUPPORT=y -CONFIG_XZ_DEC=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ramips/rt305x/config-2.6.39 b/target/linux/ramips/rt305x/config-2.6.39 deleted file mode 100644 index 58b44666ad..0000000000 --- a/target/linux/ramips/rt305x/config-2.6.39 +++ /dev/null @@ -1,140 +0,0 @@ -# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_ATH79 is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CSRC_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DMA_NONCOHERENT=y -# CONFIG_DWC_OTG is not set -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_HARDIRQS=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_WORK=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HW_RANDOM=m -CONFIG_IMAGE_CMDLINE_HACK=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQ_CPU=y -# CONFIG_LEDS_GPIO is not set -CONFIG_M25PXX_USE_FAST_READ=y -CONFIG_MACH_NO_WESTBRIDGE=y -# CONFIG_MII is not set -# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set -CONFIG_MIPS=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_MACHINE=y -CONFIG_MIPS_MT_DISABLED=y -CONFIG_MIPS_RALINK=y -CONFIG_MIPS_RAMIPS_NET=y -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_PHYSMAP=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -# CONFIG_PREEMPT_RCU is not set -# CONFIG_QUOTACTL is not set -CONFIG_RALINK_DEV_GPIO_BUTTONS=y -CONFIG_RALINK_DEV_GPIO_LEDS=y -# CONFIG_RALINK_RT288X is not set -CONFIG_RALINK_RT305X=y -# CONFIG_RALINK_RT3883 is not set -# CONFIG_RAMIPS_ETH_DEBUG is not set -CONFIG_RAMIPS_WDT=y -CONFIG_RT305X_MACH_ALL0256N=y -CONFIG_RT305X_MACH_ARGUS_ATP52B=y -CONFIG_RT305X_MACH_BC2=y -CONFIG_RT305X_MACH_DIR_300_REVB=y -CONFIG_RT305X_MACH_ESR_9753=y -CONFIG_RT305X_MACH_F5D8235_V2=y -CONFIG_RT305X_MACH_FONERA20N=y -CONFIG_RT305X_MACH_HW550_3G=y -CONFIG_RT305X_MACH_MOFI3500_3GN=y -CONFIG_RT305X_MACH_NBG_419N=y -CONFIG_RT305X_MACH_NW718=y -CONFIG_RT305X_MACH_OMNI_EMB=y -CONFIG_RT305X_MACH_PWH2004=y -CONFIG_RT305X_MACH_RT_G32_REVB=y -CONFIG_RT305X_MACH_SL_R7205=y -CONFIG_RT305X_MACH_V22RW_2X2=y -CONFIG_RT305X_MACH_W502U=y -CONFIG_RT305X_MACH_WCR150GN=y -CONFIG_RT305X_MACH_WHR_G300N=y -CONFIG_RT305X_MACH_WL341V3=y -CONFIG_RT305X_MACH_WL351=y -CONFIG_RT305X_MACH_WR512_3GN=y -CONFIG_RT305X_MACH_WR6202=y -# CONFIG_SCSI_DMA is not set -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RT288X=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -CONFIG_SOC_RT305X=y -CONFIG_SPI=y -# CONFIG_SPI_BITBANG is not set -# CONFIG_SPI_GPIO is not set -CONFIG_SPI_MASTER=y -CONFIG_SPI_RAMIPS=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -CONFIG_USB_SUPPORT=y -CONFIG_XZ_DEC=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ramips/rt3883/config-2.6.39 b/target/linux/ramips/rt3883/config-2.6.39 deleted file mode 100644 index 1993f90d8c..0000000000 --- a/target/linux/ramips/rt3883/config-2.6.39 +++ /dev/null @@ -1,115 +0,0 @@ -# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_ATH79 is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CSRC_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_HARDIRQS=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_WORK=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=m -CONFIG_IMAGE_CMDLINE_HACK=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQ_CPU=y -# CONFIG_LEDS_GPIO is not set -CONFIG_MACH_NO_WESTBRIDGE=y -# CONFIG_MII is not set -# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set -CONFIG_MIPS=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_MACHINE=y -CONFIG_MIPS_MT_DISABLED=y -CONFIG_MIPS_RALINK=y -CONFIG_MIPS_RAMIPS_NET=y -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -# CONFIG_PREEMPT_RCU is not set -# CONFIG_QUOTACTL is not set -CONFIG_RALINK_DEV_GPIO_BUTTONS=y -CONFIG_RALINK_DEV_GPIO_LEDS=y -# CONFIG_RALINK_RT288X is not set -# CONFIG_RALINK_RT305X is not set -CONFIG_RALINK_RT3883=y -# CONFIG_RAMIPS_ETH_DEBUG is not set -CONFIG_RAMIPS_WDT=y -CONFIG_RT3883_MACH_RT_N56U=y -CONFIG_RTL8366_SMI=y -CONFIG_RTL8367_PHY=y -# CONFIG_SCSI_DMA is not set -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RT288X=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -CONFIG_SOC_RT3883=y -CONFIG_SWCONFIG=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_USB_SUPPORT=y -CONFIG_XZ_DEC=y -CONFIG_ZONE_DMA_FLAG=0 |