summaryrefslogtreecommitdiff
path: root/target/linux/s3c24xx/patches/0195-From-119f4e02ba81cffe4dbc88d8ff667048ad28d925-Mon-Se.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/s3c24xx/patches/0195-From-119f4e02ba81cffe4dbc88d8ff667048ad28d925-Mon-Se.patch')
-rwxr-xr-xtarget/linux/s3c24xx/patches/0195-From-119f4e02ba81cffe4dbc88d8ff667048ad28d925-Mon-Se.patch322
1 files changed, 322 insertions, 0 deletions
diff --git a/target/linux/s3c24xx/patches/0195-From-119f4e02ba81cffe4dbc88d8ff667048ad28d925-Mon-Se.patch b/target/linux/s3c24xx/patches/0195-From-119f4e02ba81cffe4dbc88d8ff667048ad28d925-Mon-Se.patch
new file mode 100755
index 0000000000..1e4adc707f
--- /dev/null
+++ b/target/linux/s3c24xx/patches/0195-From-119f4e02ba81cffe4dbc88d8ff667048ad28d925-Mon-Se.patch
@@ -0,0 +1,322 @@
+From 1cc62cde7f9717e9349f4b117900bd17750e4bf2 Mon Sep 17 00:00:00 2001
+From: Andrzej Zaborowski <balrog@zabor.org>
+Date: Fri, 25 Jul 2008 23:06:17 +0100
+Subject: [PATCH] From 119f4e02ba81cffe4dbc88d8ff667048ad28d925 Mon Sep 17 00:00:00 2001
+ Subject: [PATCH] Hacky CONFIG_NO_IDLE_HZ (dyn-tick) support for S3C24xx.
+
+---
+ arch/arm/plat-s3c24xx/time.c | 247 +++++++++++++++++++++++++++++++++++-------
+ 1 files changed, 209 insertions(+), 38 deletions(-)
+
+diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c
+index 03b8643..8b101e0 100644
+--- a/arch/arm/plat-s3c24xx/time.c
++++ b/arch/arm/plat-s3c24xx/time.c
+@@ -3,6 +3,8 @@
+ * Copyright (C) 2003-2005 Simtec Electronics
+ * Ben Dooks, <ben@simtec.co.uk>
+ *
++ * dyn_tick support by Andrzej Zaborowski based on omap_dyn_tick_timer.
++ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+@@ -44,6 +46,9 @@ static unsigned long timer_startval;
+ static unsigned long timer_usec_ticks;
+ static struct work_struct resume_work;
+
++unsigned long pclk;
++struct clk *clk;
++
+ #define TIMER_USEC_SHIFT 16
+
+ /* we use the shifted arithmetic to work out the ratio of timer ticks
+@@ -178,11 +183,7 @@ static void s3c2410_timer_setup (void)
+ tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
+ tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
+ } else {
+- unsigned long pclk;
+- struct clk *clk;
+-
+- /* for the h1940 (and others), we use the pclk from the core
+- * to generate the timer values. since values around 50 to
++ /* since values around 50 to
+ * 70MHz are not values we can directly generate the timer
+ * value from, we need to pre-scale and divide before using it.
+ *
+@@ -190,20 +191,7 @@ static void s3c2410_timer_setup (void)
+ * (8.45 ticks per usec)
+ */
+
+- /* this is used as default if no other timer can be found */
+-
+- clk = clk_get(NULL, "timers");
+- if (IS_ERR(clk))
+- panic("failed to get clock for system timer");
+-
+- clk_enable(clk);
+-
+- pclk = clk_get_rate(clk);
+-
+- printk("pclk = %lu\n", pclk);
+-
+ /* configure clock tick */
+-
+ timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
+ printk("timer_usec_ticks = %lu\n", timer_usec_ticks);
+
+@@ -214,11 +202,6 @@ static void s3c2410_timer_setup (void)
+ tcfg0 |= ((6 - 1) / 2) << S3C2410_TCFG_PRESCALER1_SHIFT;
+
+ tcnt = (pclk / 6) / HZ;
+-
+- /* start the timer running */
+- tcon |= S3C2410_TCON_T4START | S3C2410_TCON_T4RELOAD;
+- tcon &= ~S3C2410_TCON_T4MANUALUPD;
+- __raw_writel(tcon, S3C2410_TCON);
+ }
+
+ /* timers reload after counting zero, so reduce the count by 1 */
+@@ -260,27 +243,37 @@ static void s3c2410_timer_setup (void)
+
+ }
+
++struct sys_timer s3c24xx_timer;
+ static void timer_resume_work(struct work_struct *work)
+ {
+- s3c2410_timer_setup();
+-}
+-
+-/* ooh a nasty situation arises if we try to call s3c2410_timer_setup() from
+- * the resume handler. It is called in atomic context but the clock APIs
+- * try to lock a mutex which may sleep. We are in a bit of an unusual
+- * situation because we don't have a tick source right now, but it should be
+- * okay to try to schedule a work item... hopefully
+- */
+-
+-static void s3c2410_timer_resume_atomic(void)
+-{
+- int ret = schedule_work(&resume_work);
+- if (!ret)
+- printk(KERN_INFO"Failed to schedule_work tick ctr (%d)\n", ret);
++ clk_enable(clk);
++
++#ifdef CONFIG_NO_IDLE_HZ
++ if (s3c24xx_timer.dyn_tick->state & DYN_TICK_ENABLED)
++ s3c24xx_timer.dyn_tick->enable();
++ else
++#endif
++ s3c2410_timer_setup();
+ }
+
+ static void __init s3c2410_timer_init (void)
+ {
++ if (!use_tclk1_12()) {
++ /* for the h1940 (and others), we use the pclk from the core
++ * to generate the timer values.
++ */
++
++ /* this is used as default if no other timer can be found */
++ clk = clk_get(NULL, "timers");
++ if (IS_ERR(clk))
++ panic("failed to get clock for system timer");
++
++ clk_enable(clk);
++
++ pclk = clk_get_rate(clk);
++ printk("pclk = %lu\n", pclk);
++ }
++
+ INIT_WORK(&resume_work, timer_resume_work);
+ s3c2410_timer_setup();
+ setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
+@@ -302,8 +295,186 @@ static void s3c2410_timer_resume(void)
+ "s3c2410_timer_resume_work already queued ???\n");
+ }
+
++#ifdef CONFIG_NO_IDLE_HZ
++/*
++ * We'll set a constant prescaler so we don't have to bother setting it
++ * when reprogramming and so that we avoid costly divisions.
++ *
++ * (2 * HZ) << INPUT_FREQ_SHIFT is the desired frequency after prescaler.
++ * At HZ == 200, HZ * 1024 should work for PCLKs of up to ~53.5 MHz.
++ */
++#define INPUT_FREQ_SHIFT 9
++
++static int ticks_last;
++static int ticks_left;
++static uint32_t tcnto_last;
++
++static inline int s3c24xx_timer_read(void)
++{
++ uint32_t tcnto = __raw_readl(S3C2410_TCNTO(4));
++
++ /*
++ * WARNING: sometimes we get called before TCNTB has been
++ * loaded into the counter and TCNTO then returns its previous
++ * value and kill us, so don't do anything before counter is
++ * reloaded.
++ */
++ if (unlikely(tcnto == tcnto_last))
++ return ticks_last;
++
++ tcnto_last = -1;
++ return tcnto <<
++ ((__raw_readl(S3C2410_TCFG1) >> S3C2410_TCFG1_MUX4_SHIFT) & 3);
++}
++
++static inline void s3c24xx_timer_program(int ticks)
++{
++ uint32_t tcon = __raw_readl(S3C2410_TCON) & ~(7 << 20);
++ uint32_t tcfg1 = __raw_readl(S3C2410_TCFG1) & ~S3C2410_TCFG1_MUX4_MASK;
++
++ /* Just make sure the timer is stopped. */
++ __raw_writel(tcon, S3C2410_TCON);
++
++ /* TODO: add likely()ies / unlikely()ies */
++ if (ticks >> 18) {
++ ticks_last = min(ticks, 0xffff << 3);
++ ticks_left = ticks - ticks_last;
++ __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV16, S3C2410_TCFG1);
++ __raw_writel(ticks_last >> 3, S3C2410_TCNTB(4));
++ } else if (ticks >> 17) {
++ ticks_last = ticks;
++ ticks_left = 0;
++ __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV8, S3C2410_TCFG1);
++ __raw_writel(ticks_last >> 2, S3C2410_TCNTB(4));
++ } else if (ticks >> 16) {
++ ticks_last = ticks;
++ ticks_left = 0;
++ __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV4, S3C2410_TCFG1);
++ __raw_writel(ticks_last >> 1, S3C2410_TCNTB(4));
++ } else {
++ ticks_last = ticks;
++ ticks_left = 0;
++ __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV2, S3C2410_TCFG1);
++ __raw_writel(ticks_last >> 0, S3C2410_TCNTB(4));
++ }
++
++ tcnto_last = __raw_readl(S3C2410_TCNTO(4));
++ __raw_writel(tcon | S3C2410_TCON_T4MANUALUPD,
++ S3C2410_TCON);
++ __raw_writel(tcon | S3C2410_TCON_T4START,
++ S3C2410_TCON);
++}
++
++/*
++ * If we have already waited all the time we were supposed to wait,
++ * kick the timer, setting the longest allowed timeout value just
++ * for time-keeping.
++ */
++static inline void s3c24xx_timer_program_idle(void)
++{
++ s3c24xx_timer_program(0xffff << 3);
++}
++
++static inline void s3c24xx_timer_update(int restart)
++{
++ int ticks_cur = s3c24xx_timer_read();
++ int jiffies_elapsed = (ticks_last - ticks_cur) >> INPUT_FREQ_SHIFT;
++ int subjiffy = ticks_last - (jiffies_elapsed << INPUT_FREQ_SHIFT);
++
++ if (restart) {
++ if (ticks_left >= (1 << INPUT_FREQ_SHIFT))
++ s3c24xx_timer_program(ticks_left);
++ else
++ s3c24xx_timer_program_idle();
++ ticks_last += subjiffy;
++ } else
++ ticks_last = subjiffy;
++
++ while (jiffies_elapsed --)
++ timer_tick();
++}
++
++/* Called when the timer expires. */
++static irqreturn_t s3c24xx_timer_handler(int irq, void *dev_id)
++{
++ tcnto_last = -1;
++ s3c24xx_timer_update(1);
++
++ return IRQ_HANDLED;
++}
++
++/* Called to update jiffies with time elapsed. */
++static irqreturn_t s3c24xx_timer_handler_dyn_tick(int irq, void *dev_id)
++{
++ s3c24xx_timer_update(0);
++
++ return IRQ_HANDLED;
++}
++
++/*
++ * Programs the next timer interrupt needed. Called when dynamic tick is
++ * enabled, and to reprogram the ticks to skip from pm_idle. The CPU goes
++ * to sleep directly after this.
++ */
++static void s3c24xx_timer_reprogram_dyn_tick(unsigned long next_jiffies)
++{
++ int subjiffy_left = ticks_last - s3c24xx_timer_read();
++
++ s3c24xx_timer_program(max((int) next_jiffies, 1) << INPUT_FREQ_SHIFT);
++ ticks_last += subjiffy_left;
++}
++
++static unsigned long s3c24xx_timer_offset_dyn_tick(void)
++{
++ /* TODO */
++ return 0;
++}
++
++static int s3c24xx_timer_enable_dyn_tick(void)
++{
++ /* Set our constant prescaler. */
++ uint32_t tcfg0 = __raw_readl(S3C2410_TCFG0);
++ int prescaler =
++ max(min(256, (int) pclk / (HZ << (INPUT_FREQ_SHIFT + 1))), 1);
++
++ tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
++ tcfg0 |= (prescaler - 1) << S3C2410_TCFG_PRESCALER1_SHIFT;
++ __raw_writel(tcfg0, S3C2410_TCFG0);
++
++ /* Override handlers. */
++ s3c2410_timer_irq.handler = s3c24xx_timer_handler;
++ s3c24xx_timer.offset = s3c24xx_timer_offset_dyn_tick;
++
++ printk(KERN_INFO "dyn_tick enabled on s3c24xx timer 4, "
++ "%li Hz pclk with prescaler %i\n", pclk, prescaler);
++
++ s3c24xx_timer_program_idle();
++
++ return 0;
++}
++
++static int s3c24xx_timer_disable_dyn_tick(void)
++{
++ s3c2410_timer_irq.handler = s3c2410_timer_interrupt;
++ s3c24xx_timer.offset = s3c2410_gettimeoffset;
++ s3c2410_timer_setup();
++
++ return 0;
++}
++
++static struct dyn_tick_timer s3c24xx_dyn_tick_timer = {
++ .enable = s3c24xx_timer_enable_dyn_tick,
++ .disable = s3c24xx_timer_disable_dyn_tick,
++ .reprogram = s3c24xx_timer_reprogram_dyn_tick,
++ .handler = s3c24xx_timer_handler_dyn_tick,
++};
++#endif /* CONFIG_NO_IDLE_HZ */
++
+ struct sys_timer s3c24xx_timer = {
+ .init = s3c2410_timer_init,
+ .offset = s3c2410_gettimeoffset,
+ .resume = s3c2410_timer_resume,
++#ifdef CONFIG_NO_IDLE_HZ
++ .dyn_tick = &s3c24xx_dyn_tick_timer,
++#endif
+ };
+--
+1.5.6.3
+