1 files changed, 0 insertions, 483 deletions
diff --git a/target/linux/s3c24xx/patches-2.6.30/070-s3c24xx-time.patch b/target/linux/s3c24xx/patches-2.6.30/070-s3c24xx-time.patch
deleted file mode 100644
index 8b850452e2..0000000000
--- a/target/linux/s3c24xx/patches-2.6.30/070-s3c24xx-time.patch
+++ /dev/null
@@ -1,483 +0,0 @@
---- /dev/null
-+++ b/arch/arm/plat-s3c24xx/time.c
-@@ -0,0 +1,480 @@
-+/* linux/arch/arm/plat-s3c24xx/time.c
-+ *
-+ * Copyright (C) 2003-2005 Simtec Electronics
-+ *	Ben Dooks, <ben@simtec.co.uk>
-+ *
-+ * dyn_tick support by Andrzej Zaborowski based on omap_dyn_tick_timer.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/err.h>
-+#include <linux/clk.h>
-+
-+#include <asm/system.h>
-+#include <asm/leds.h>
-+#include <asm/mach-types.h>
-+
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <mach/map.h>
-+#include <asm/plat-s3c/regs-timer.h>
-+#include <mach/regs-irq.h>
-+#include <asm/mach/time.h>
-+
-+#include <asm/plat-s3c24xx/clock.h>
-+#include <asm/plat-s3c24xx/cpu.h>
-+
-+static unsigned long timer_startval;
-+static unsigned long timer_usec_ticks;
-+static struct work_struct resume_work;
-+
-+unsigned long pclk;
-+struct clk *clk;
-+
-+#define TIMER_USEC_SHIFT 16
-+
-+/* we use the shifted arithmetic to work out the ratio of timer ticks
-+ * to usecs, as often the peripheral clock is not a nice even multiple
-+ * of 1MHz.
-+ *
-+ * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok
-+ * for the current HZ value of 200 without producing overflows.
-+ *
-+ * Original patch by Dimitry Andric, updated by Ben Dooks
-+*/
-+
-+
-+/* timer_mask_usec_ticks
-+ *
-+ * given a clock and divisor, make the value to pass into timer_ticks_to_usec
-+ * to scale the ticks into usecs
-+*/
-+
-+static inline unsigned long
-+timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk)
-+{
-+	unsigned long den = pclk / 1000;
-+
-+	return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den;
-+}
-+
-+/* timer_ticks_to_usec
-+ *
-+ * convert timer ticks to usec.
-+*/
-+
-+static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
-+{
-+	unsigned long res;
-+
-+	res = ticks * timer_usec_ticks;
-+	res += 1 << (TIMER_USEC_SHIFT - 4);	/* round up slightly */
-+
-+	return res >> TIMER_USEC_SHIFT;
-+}
-+
-+/***
-+ * Returns microsecond  since last clock interrupt.  Note that interrupts
-+ * will have been disabled by do_gettimeoffset()
-+ * IRQs are disabled before entering here from do_gettimeofday()
-+ */
-+
-+#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
-+
-+unsigned long s3c2410_gettimeoffset (void)
-+{
-+	unsigned long tdone;
-+	unsigned long irqpend;
-+	unsigned long tval;
-+
-+	/* work out how many ticks have gone since last timer interrupt */
-+
-+        tval =  __raw_readl(S3C2410_TCNTO(4));
-+	tdone = timer_startval - tval;
-+
-+	/* check to see if there is an interrupt pending */
-+
-+	irqpend = __raw_readl(S3C2410_SRCPND);
-+	if (irqpend & SRCPND_TIMER4) {
-+		/* re-read the timer, and try and fix up for the missed
-+		 * interrupt. Note, the interrupt may go off before the
-+		 * timer has re-loaded from wrapping.
-+		 */
-+
-+		tval =  __raw_readl(S3C2410_TCNTO(4));
-+		tdone = timer_startval - tval;
-+
-+		if (tval != 0)
-+			tdone += timer_startval;
-+	}
-+
-+	return timer_ticks_to_usec(tdone);
-+}
-+
-+
-+/*
-+ * IRQ handler for the timer
-+ */
-+static irqreturn_t
-+s3c2410_timer_interrupt(int irq, void *dev_id)
-+{
-+	timer_tick();
-+	return IRQ_HANDLED;
-+}
-+
-+static struct irqaction s3c2410_timer_irq = {
-+	.name		= "S3C2410 Timer Tick",
-+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-+	.handler	= s3c2410_timer_interrupt,
-+};
-+
-+#define use_tclk1_12() ( \
-+	machine_is_bast()	|| \
-+	machine_is_vr1000()	|| \
-+	machine_is_anubis()	|| \
-+	machine_is_osiris() )
-+
-+/*
-+ * Set up timer interrupt, and return the current time in seconds.
-+ *
-+ * Currently we only use timer4, as it is the only timer which has no
-+ * other function that can be exploited externally
-+ */
-+static void s3c2410_timer_setup (void)
-+{
-+	unsigned long tcon;
-+	unsigned long tcnt;
-+	unsigned long tcfg1;
-+	unsigned long tcfg0;
-+
-+	tcnt = 0xffff;  /* default value for tcnt */
-+
-+	/* read the current timer configuration bits */
-+
-+	tcon = __raw_readl(S3C2410_TCON);
-+	tcfg1 = __raw_readl(S3C2410_TCFG1);
-+	tcfg0 = __raw_readl(S3C2410_TCFG0);
-+
-+	/* configure the system for whichever machine is in use */
-+
-+	if (use_tclk1_12()) {
-+		/* timer is at 12MHz, scaler is 1 */
-+		timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
-+		tcnt = 12000000 / HZ;
-+
-+		tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
-+		tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
-+	} else {
-+		/* since values around 50 to
-+		 * 70MHz are not values we can directly generate the timer
-+		 * value from, we need to pre-scale and divide before using it.
-+		 *
-+		 * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz
-+		 * (8.45 ticks per usec)
-+		 */
-+
-+		/* configure clock tick */
-+		timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
-+		printk("timer_usec_ticks = %lu\n", timer_usec_ticks);
-+
-+		tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
-+		tcfg1 |= S3C2410_TCFG1_MUX4_DIV2;
-+
-+		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
-+		tcfg0 |= ((6 - 1) / 2) << S3C2410_TCFG_PRESCALER1_SHIFT;
-+
-+		tcnt = (pclk / 6) / HZ;
-+	}
-+
-+	/* timers reload after counting zero, so reduce the count by 1 */
-+
-+	tcnt--;
-+
-+	printk("timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
-+	       tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
-+
-+	/* check to see if timer is within 16bit range... */
-+	if (tcnt > 0xffff) {
-+		panic("setup_timer: HZ is too small, cannot configure timer!");
-+		return;
-+	}
-+
-+	__raw_writel(tcfg1, S3C2410_TCFG1);
-+	__raw_writel(tcfg0, S3C2410_TCFG0);
-+
-+	timer_startval = tcnt;
-+	__raw_writel(tcnt, S3C2410_TCNTB(4));
-+
-+	/* ensure timer is stopped... */
-+
-+	tcon &= ~(7<<20);
-+	tcon |= S3C2410_TCON_T4RELOAD;
-+	tcon |= S3C2410_TCON_T4MANUALUPD;
-+
-+	__raw_writel(tcon, S3C2410_TCON);
-+	__raw_writel(tcnt, S3C2410_TCNTB(4));
-+	__raw_writel(tcnt, S3C2410_TCMPB(4));
-+
-+	/* start the timer running */
-+	tcon |= S3C2410_TCON_T4START;
-+	tcon &= ~S3C2410_TCON_T4MANUALUPD;
-+	__raw_writel(tcon, S3C2410_TCON);
-+
-+	__raw_writel(__raw_readl(S3C2410_INTMSK) & (~(1UL << 14)),
-+		     S3C2410_INTMSK);
-+
-+}
-+
-+struct sys_timer s3c24xx_timer;
-+static void timer_resume_work(struct work_struct *work)
-+{
-+	clk_enable(clk);
-+
-+#ifdef CONFIG_NO_IDLE_HZ
-+	if (s3c24xx_timer.dyn_tick->state & DYN_TICK_ENABLED)
-+		s3c24xx_timer.dyn_tick->enable();
-+	else
-+#endif
-+		s3c2410_timer_setup();
-+}
-+
-+static void __init s3c2410_timer_init (void)
-+{
-+	if (!use_tclk1_12()) {
-+		/* for the h1940 (and others), we use the pclk from the core
-+		 * to generate the timer values.
-+		 */
-+
-+		/* this is used as default if no other timer can be found */
-+		clk = clk_get(NULL, "timers");
-+		if (IS_ERR(clk))
-+			panic("failed to get clock for system timer");
-+
-+		clk_enable(clk);
-+
-+		pclk = clk_get_rate(clk);
-+		printk("pclk = %lu\n", pclk);
-+	}
-+
-+	INIT_WORK(&resume_work, timer_resume_work);
-+	s3c2410_timer_setup();
-+	setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
-+}
-+
-+static void s3c2410_timer_resume_work(struct work_struct *work)
-+{
-+	s3c2410_timer_setup();
-+}
-+
-+static void s3c2410_timer_resume(void)
-+{
-+	static DECLARE_WORK(work, s3c2410_timer_resume_work);
-+	int res;
-+
-+	res = schedule_work(&work);
-+	if (!res)
-+		printk(KERN_ERR
-+		    "s3c2410_timer_resume_work already queued ???\n");
-+}
-+
-+#ifdef CONFIG_NO_IDLE_HZ
-+/*
-+ * We'll set a constant prescaler so we don't have to bother setting it
-+ * when reprogramming and so that we avoid costly divisions.
-+ *
-+ * (2 * HZ) << INPUT_FREQ_SHIFT is the desired frequency after prescaler.
-+ * At HZ == 200, HZ * 1024 should work for PCLKs of up to ~53.5 MHz.
-+ */
-+#define INPUT_FREQ_SHIFT	9
-+
-+static int ticks_last;
-+static int ticks_left;
-+static uint32_t tcnto_last;
-+
-+static inline int s3c24xx_timer_read(void)
-+{
-+	uint32_t tcnto = __raw_readl(S3C2410_TCNTO(4));
-+
-+	/*
-+	 * WARNING: sometimes we get called before TCNTB has been
-+	 * loaded into the counter and TCNTO then returns its previous
-+	 * value and kill us, so don't do anything before counter is
-+	 * reloaded.
-+	 */
-+	if (unlikely(tcnto == tcnto_last))
-+		return ticks_last;
-+
-+	tcnto_last = -1;
-+	return tcnto <<
-+		((__raw_readl(S3C2410_TCFG1) >> S3C2410_TCFG1_MUX4_SHIFT) & 3);
-+}
-+
-+static inline void s3c24xx_timer_program(int ticks)
-+{
-+	uint32_t tcon = __raw_readl(S3C2410_TCON) & ~(7 << 20);
-+	uint32_t tcfg1 = __raw_readl(S3C2410_TCFG1) & ~S3C2410_TCFG1_MUX4_MASK;
-+
-+	/* Just make sure the timer is stopped.  */
-+	__raw_writel(tcon, S3C2410_TCON);
-+
-+	/* TODO: add likely()ies / unlikely()ies */
-+	if (ticks >> 18) {
-+		ticks_last = min(ticks, 0xffff << 3);
-+		ticks_left = ticks - ticks_last;
-+		__raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV16, S3C2410_TCFG1);
-+		__raw_writel(ticks_last >> 3, S3C2410_TCNTB(4));
-+	} else if (ticks >> 17) {
-+		ticks_last = ticks;
-+		ticks_left = 0;
-+		__raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV8, S3C2410_TCFG1);
-+		__raw_writel(ticks_last >> 2, S3C2410_TCNTB(4));
-+	} else if (ticks >> 16) {
-+		ticks_last = ticks;
-+		ticks_left = 0;
-+		__raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV4, S3C2410_TCFG1);
-+		__raw_writel(ticks_last >> 1, S3C2410_TCNTB(4));
-+	} else {
-+		ticks_last = ticks;
-+		ticks_left = 0;
-+		__raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV2, S3C2410_TCFG1);
-+		__raw_writel(ticks_last >> 0, S3C2410_TCNTB(4));
-+	}
-+
-+	tcnto_last = __raw_readl(S3C2410_TCNTO(4));
-+	__raw_writel(tcon | S3C2410_TCON_T4MANUALUPD,
-+			S3C2410_TCON);
-+	__raw_writel(tcon | S3C2410_TCON_T4START,
-+			S3C2410_TCON);
-+}
-+
-+/*
-+ * If we have already waited all the time we were supposed to wait,
-+ * kick the timer, setting the longest allowed timeout value just
-+ * for time-keeping.
-+ */
-+static inline void s3c24xx_timer_program_idle(void)
-+{
-+	s3c24xx_timer_program(0xffff << 3);
-+}
-+
-+static inline void s3c24xx_timer_update(int restart)
-+{
-+	int ticks_cur = s3c24xx_timer_read();
-+	int jiffies_elapsed = (ticks_last - ticks_cur) >> INPUT_FREQ_SHIFT;
-+	int subjiffy = ticks_last - (jiffies_elapsed << INPUT_FREQ_SHIFT);
-+
-+	if (restart) {
-+		if (ticks_left >= (1 << INPUT_FREQ_SHIFT))
-+			s3c24xx_timer_program(ticks_left);
-+		else
-+			s3c24xx_timer_program_idle();
-+		ticks_last += subjiffy;
-+	} else
-+		ticks_last = subjiffy;
-+
-+	while (jiffies_elapsed --)
-+		timer_tick();
-+}
-+
-+/* Called when the timer expires.  */
-+static irqreturn_t s3c24xx_timer_handler(int irq, void *dev_id)
-+{
-+	tcnto_last = -1;
-+	s3c24xx_timer_update(1);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/* Called to update jiffies with time elapsed.  */
-+static irqreturn_t s3c24xx_timer_handler_dyn_tick(int irq, void *dev_id)
-+{
-+	s3c24xx_timer_update(0);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/*
-+ * Programs the next timer interrupt needed.  Called when dynamic tick is
-+ * enabled, and to reprogram the ticks to skip from pm_idle.  The CPU goes
-+ * to sleep directly after this.
-+ */
-+static void s3c24xx_timer_reprogram_dyn_tick(unsigned long next_jiffies)
-+{
-+	int subjiffy_left = ticks_last - s3c24xx_timer_read();
-+
-+	s3c24xx_timer_program(max((int) next_jiffies, 1) << INPUT_FREQ_SHIFT);
-+	ticks_last += subjiffy_left;
-+}
-+
-+static unsigned long s3c24xx_timer_offset_dyn_tick(void)
-+{
-+	/* TODO */
-+	return 0;
-+}
-+
-+static int s3c24xx_timer_enable_dyn_tick(void)
-+{
-+	/* Set our constant prescaler.  */
-+	uint32_t tcfg0 = __raw_readl(S3C2410_TCFG0);
-+	int prescaler =
-+		max(min(256, (int) pclk / (HZ << (INPUT_FREQ_SHIFT + 1))), 1);
-+
-+	tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
-+	tcfg0 |= (prescaler - 1) << S3C2410_TCFG_PRESCALER1_SHIFT;
-+	__raw_writel(tcfg0, S3C2410_TCFG0);
-+
-+	/* Override handlers.  */
-+	s3c2410_timer_irq.handler = s3c24xx_timer_handler;
-+	s3c24xx_timer.offset = s3c24xx_timer_offset_dyn_tick;
-+
-+	printk(KERN_INFO "dyn_tick enabled on s3c24xx timer 4, "
-+			"%li Hz pclk with prescaler %i\n", pclk, prescaler);
-+
-+	s3c24xx_timer_program_idle();
-+
-+	return 0;
-+}
-+
-+static int s3c24xx_timer_disable_dyn_tick(void)
-+{
-+	s3c2410_timer_irq.handler = s3c2410_timer_interrupt;
-+	s3c24xx_timer.offset = s3c2410_gettimeoffset;
-+	s3c2410_timer_setup();
-+
-+	return 0;
-+}
-+
-+static struct dyn_tick_timer s3c24xx_dyn_tick_timer = {
-+	.enable		= s3c24xx_timer_enable_dyn_tick,
-+	.disable	= s3c24xx_timer_disable_dyn_tick,
-+	.reprogram	= s3c24xx_timer_reprogram_dyn_tick,
-+	.handler	= s3c24xx_timer_handler_dyn_tick,
-+};
-+#endif	/* CONFIG_NO_IDLE_HZ */
-+
-+struct sys_timer s3c24xx_timer = {
-+	.init		= s3c2410_timer_init,
-+	.offset		= s3c2410_gettimeoffset,
-+	.resume		= s3c2410_timer_resume,
-+#ifdef CONFIG_NO_IDLE_HZ
-+	.dyn_tick	= &s3c24xx_dyn_tick_timer,
-+#endif
-+};