summaryrefslogtreecommitdiff
path: root/target/linux/s3c24xx/patches-2.6.24/1235-fix-force-sdcard-clk-off-when-idle.patch.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/s3c24xx/patches-2.6.24/1235-fix-force-sdcard-clk-off-when-idle.patch.patch')
-rw-r--r--target/linux/s3c24xx/patches-2.6.24/1235-fix-force-sdcard-clk-off-when-idle.patch.patch240
1 files changed, 240 insertions, 0 deletions
diff --git a/target/linux/s3c24xx/patches-2.6.24/1235-fix-force-sdcard-clk-off-when-idle.patch.patch b/target/linux/s3c24xx/patches-2.6.24/1235-fix-force-sdcard-clk-off-when-idle.patch.patch
new file mode 100644
index 0000000000..327b450129
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.24/1235-fix-force-sdcard-clk-off-when-idle.patch.patch
@@ -0,0 +1,240 @@
+From 5d70edcbe3ff5f6d5aef54ee9e278ad1ce431fd5 Mon Sep 17 00:00:00 2001
+From: Andy Green <andy@openmoko.com>
+Date: Thu, 17 Jul 2008 10:02:19 +0100
+Subject: [PATCH] fix-force-sdcard-clk-off-when-idle.patch
+
+Existing Glamo bit for stopping SD Card Clock when there is no
+transfer taking place does not work. This patch adds stuff around
+the transfer code to force the SD clock up when something is going on
+and down when it is idle. This'll save a little power and noise ;-)
+
+I tested it briefly and was able to SD Boot normally on Sandisk 512M.
+Wider testing is appreciated.
+
+Signed-off-by: Andy Green <andy@openmoko.com>
+---
+ drivers/mfd/glamo/glamo-mci.c | 126 +++++++++++++++++++++++++++++------------
+ 1 files changed, 89 insertions(+), 37 deletions(-)
+
+diff --git a/drivers/mfd/glamo/glamo-mci.c b/drivers/mfd/glamo/glamo-mci.c
+index f264a6c..350b47d 100644
+--- a/drivers/mfd/glamo/glamo-mci.c
++++ b/drivers/mfd/glamo/glamo-mci.c
+@@ -20,6 +20,7 @@
+ #include <linux/pcf50633.h>
+ #include <linux/delay.h>
+ #include <linux/interrupt.h>
++#include <linux/spinlock.h>
+
+ #include <asm/dma.h>
+ #include <asm/dma-mapping.h>
+@@ -32,6 +33,7 @@
+ /* from glamo-core.c */
+ extern struct glamo_mci_pdata glamo_mci_def_pdata;
+
++static spinlock_t clock_lock;
+
+ #define DRIVER_NAME "glamo-mci"
+ #define RESSIZE(ressource) (((ressource)->end - (ressource)->start) + 1)
+@@ -164,6 +166,67 @@ static int do_pio_write(struct glamo_mci_host *host)
+ return err;
+ }
+
++static void __glamo_mci_fix_card_div(struct glamo_mci_host *host, int div)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&clock_lock, flags);
++
++ if (div < 0) {
++ /* stop clock - remove clock from divider input */
++ writew(readw(glamo_mci_def_pdata.pglamo->base +
++ GLAMO_REG_CLOCK_GEN5_1) & (~GLAMO_CLOCK_GEN51_EN_DIV_TCLK),
++ glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1);
++ } else {
++ /* set the nearest prescaler factor
++ *
++ * register shared with SCLK divisor -- no chance of race because
++ * we don't use sensor interface
++ */
++ writew_dly((readw(glamo_mci_def_pdata.pglamo->base +
++ GLAMO_REG_CLOCK_GEN8) & 0xff00) | div,
++ glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN8);
++ /* enable clock to divider input */
++ writew_dly(readw(glamo_mci_def_pdata.pglamo->base +
++ GLAMO_REG_CLOCK_GEN5_1) | GLAMO_CLOCK_GEN51_EN_DIV_TCLK,
++ glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1);
++ }
++
++ spin_unlock_irqrestore(&clock_lock, flags);
++}
++
++static int __glamo_mci_set_card_clock(struct glamo_mci_host *host, int freq,
++ int *division)
++{
++ int div = 0;
++ int real_rate = 0;
++
++ if (freq) {
++ /* Set clock */
++ for (div = 0; div < 256; div++) {
++ real_rate = host->clk_rate / (div + 1);
++ if (real_rate <= freq)
++ break;
++ }
++ if (div > 255)
++ div = 255;
++
++ if (division)
++ *division = div;
++
++ __glamo_mci_fix_card_div(host, div);
++
++ } else {
++ /* stop clock */
++ if (division)
++ *division = 0xff;
++
++ __glamo_mci_fix_card_div(host, -1); /* clock off */
++ }
++
++ return real_rate;
++}
++
+ static void glamo_mci_irq(unsigned int irq, struct irq_desc *desc)
+ {
+ struct glamo_mci_host *host = (struct glamo_mci_host *)
+@@ -212,6 +275,10 @@ static void glamo_mci_irq(unsigned int irq, struct irq_desc *desc)
+ glamo_mci_send_request(host->mmc);
+ host->cmd_is_stop = 0;
+ }
++
++ /* clock off */
++ __glamo_mci_fix_card_div(host, -1);
++
+ done:
+ host->complete_what = COMPLETION_NONE;
+ host->mrq = NULL;
+@@ -441,8 +508,11 @@ static void glamo_mci_send_request(struct mmc_host *mmc)
+ cmd->opcode, cmd->arg, cmd->data, cmd->mrq->stop,
+ cmd->flags);
+
++ /* resume requested clock rate */
++ __glamo_mci_fix_card_div(host, host->clk_div);
++
+ if (glamo_mci_send_command(host, cmd))
+- return;
++ goto bail;
+ /*
+ * we must spin until response is ready or timed out
+ * -- we don't get interrupts unless there is a bulk rx
+@@ -464,7 +534,7 @@ static void glamo_mci_send_request(struct mmc_host *mmc)
+ cmd->error = -EILSEQ;
+
+ if (host->cmd_is_stop)
+- return;
++ goto bail;
+
+ if (cmd->error) {
+ dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
+@@ -516,10 +586,12 @@ static void glamo_mci_send_request(struct mmc_host *mmc)
+ if (cmd->data->error)
+ cmd->data->error = -ETIMEDOUT;
+ dev_err(&host->pdev->dev, "Payload timeout\n");
+- return;
++ goto bail;
+ }
+
+- /* yay we are an interrupt controller! -- call the ISR */
++ /* yay we are an interrupt controller! -- call the ISR
++ * it will stop clock to card
++ */
+ glamo_mci_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC),
+ irq_desc + IRQ_GLAMO(GLAMO_IRQIDX_MMC));
+ }
+@@ -529,6 +601,12 @@ done:
+ host->complete_what = COMPLETION_NONE;
+ host->mrq = NULL;
+ mmc_request_done(host->mmc, cmd->mrq);
++ return;
++
++bail:
++ /* stop the clock to card */
++ __glamo_mci_fix_card_div(host, -1);
++ return;
+ }
+
+ static void glamo_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+@@ -556,11 +634,12 @@ static void glamo_mci_reset(struct glamo_mci_host *host)
+ glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_MMC);
+ }
+
++
+ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+ {
+ struct glamo_mci_host *host = mmc_priv(mmc);
+- int mci_psc = 0;
+ int n = 0;
++ int div;
+
+ /* Set power */
+ switch(ios->power_mode) {
+@@ -590,43 +669,15 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+ }
+ host->power_mode_current = ios->power_mode;
+
+- /* Set clock */
+-/* if (ios->clock) { */
+- for (mci_psc = 0; mci_psc < 256; mci_psc++) {
+- host->real_rate = host->clk_rate / (mci_psc + 1);
+- if (host->real_rate <= ios->clock)
+- break;
+- }
+- if (mci_psc > 255)
+- mci_psc = 255;
+- host->clk_div = mci_psc;
+- /* set the nearest prescaler factor
+- *
+- * register shared with SCLK divisor -- no chance of race because
+- * we don't use sensor interface
+- */
+- writew_dly((readw(glamo_mci_def_pdata.pglamo->base +
+- GLAMO_REG_CLOCK_GEN8) & 0xff00) | host->clk_div,
+- glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN8);
+- /* enable clock to divider input */
+- writew_dly(readw(glamo_mci_def_pdata.pglamo->base +
+- GLAMO_REG_CLOCK_GEN5_1) | GLAMO_CLOCK_GEN51_EN_DIV_TCLK,
+- glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1);
+-#if 0
+- } else { /* stop clock */
+- host->real_rate = 0;
+- /* remove clock from divider input */
+- writew(readw(glamo_mci_def_pdata.pglamo->base +
+- GLAMO_REG_CLOCK_GEN5_1) & (~GLAMO_CLOCK_GEN51_EN_DIV_TCLK),
+- glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1);
+- }
+-#endif
++ host->real_rate = __glamo_mci_set_card_clock(host, ios->clock, &div);
++ host->clk_div = div;
++
+ if ((ios->power_mode == MMC_POWER_ON) ||
+ (ios->power_mode == MMC_POWER_UP)) {
+ dev_info(&host->pdev->dev,
+ "powered (vdd = %d) clk: %lukHz div=%d (req: %ukHz). "
+ "Bus width=%d\n",ios->vdd,
+- host->real_rate / 1000, mci_psc,
++ host->real_rate / 1000, host->real_rate,
+ ios->clock / 1000, ios->bus_width);
+ } else
+ dev_info(&host->pdev->dev, "glamo_mci_set_ios: power down.\n");
+@@ -856,6 +907,7 @@ static struct platform_driver glamo_mci_driver =
+
+ static int __init glamo_mci_init(void)
+ {
++ spin_lock_init(&clock_lock);
+ platform_driver_register(&glamo_mci_driver);
+ return 0;
+ }
+--
+1.5.6.5
+