summaryrefslogtreecommitdiff
path: root/target/linux/s3c24xx/patches-2.6.24/1012-gta01-jbt6k74.patch.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/s3c24xx/patches-2.6.24/1012-gta01-jbt6k74.patch.patch')
-rw-r--r--target/linux/s3c24xx/patches-2.6.24/1012-gta01-jbt6k74.patch.patch748
1 files changed, 748 insertions, 0 deletions
diff --git a/target/linux/s3c24xx/patches-2.6.24/1012-gta01-jbt6k74.patch.patch b/target/linux/s3c24xx/patches-2.6.24/1012-gta01-jbt6k74.patch.patch
new file mode 100644
index 0000000000..210d004126
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.24/1012-gta01-jbt6k74.patch.patch
@@ -0,0 +1,748 @@
+From 6887823c9ab409a15ea73bda8a8b0523cebbe444 Mon Sep 17 00:00:00 2001
+From: mokopatches <mokopatches@openmoko.org>
+Date: Fri, 4 Apr 2008 11:31:13 +0100
+Subject: [PATCH] gta01-jbt6k74.patch
+ This driver adds support for the SPI-based control interface of the LCM (LCD
+ Panel) found on the FIC GTA01 hardware.
+
+The specific panel in this hardware is a TPO TD028TTEC1, but the driver should
+be able to drive any other diplay based on the JBT6K74-AS controller ASIC.
+
+Signed-off-by: Harald Welte <laforge@openmoko.org>
+---
+ arch/arm/mach-s3c2410/Kconfig | 1 +
+ drivers/video/display/Kconfig | 11 +
+ drivers/video/display/Makefile | 1 +
+ drivers/video/display/jbt6k74.c | 678 +++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 691 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/video/display/jbt6k74.c
+
+diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
+index a2acd65..ff339e1 100644
+--- a/arch/arm/mach-s3c2410/Kconfig
++++ b/arch/arm/mach-s3c2410/Kconfig
+@@ -107,6 +107,7 @@ config MACH_VR1000
+ config MACH_QT2410
+ bool "QT2410"
+ select CPU_S3C2410
++ select DISPLAY_JBT6K74
+ help
+ Say Y here if you are using the Armzone QT2410
+
+diff --git a/drivers/video/display/Kconfig b/drivers/video/display/Kconfig
+index f99af93..f0da483 100644
+--- a/drivers/video/display/Kconfig
++++ b/drivers/video/display/Kconfig
+@@ -21,4 +21,15 @@ config DISPLAY_SUPPORT
+ comment "Display hardware drivers"
+ depends on DISPLAY_SUPPORT
+
++config DISPLAY_JBT6K74
++ tristate "TPO JBT6K74-AS TFT display ASIC control interface"
++ depends on SPI_MASTER && SYSFS
++ help
++ SPI driver for the control interface of TFT panels containing
++ the TPO JBT6K74-AS controller ASIC, such as the TPO TD028TTEC1
++ TFT diplay module used in the FIC/OpenMoko Neo1973 GSM phones.
++
++ The control interface is required for display operation, as it
++ controls power management, display timing and gamma calibration.
++
+ endmenu
+diff --git a/drivers/video/display/Makefile b/drivers/video/display/Makefile
+index c0ea832..011b69d 100644
+--- a/drivers/video/display/Makefile
++++ b/drivers/video/display/Makefile
+@@ -3,4 +3,5 @@
+ display-objs := display-sysfs.o
+
+ obj-$(CONFIG_DISPLAY_SUPPORT) += display.o
++obj-$(CONFIG_DISPLAY_JBT6K74) += jbt6k74.o
+
+diff --git a/drivers/video/display/jbt6k74.c b/drivers/video/display/jbt6k74.c
+new file mode 100644
+index 0000000..d021d7e
+--- /dev/null
++++ b/drivers/video/display/jbt6k74.c
+@@ -0,0 +1,678 @@
++/* Linux kernel driver for the tpo JBT6K74-AS LCM ASIC
++ *
++ * Copyright (C) 2006-2007 by OpenMoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>,
++ * Stefan Schmidt <stefan@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++
++#include <linux/spi/spi.h>
++
++enum jbt_register {
++ JBT_REG_SLEEP_IN = 0x10,
++ JBT_REG_SLEEP_OUT = 0x11,
++
++ JBT_REG_DISPLAY_OFF = 0x28,
++ JBT_REG_DISPLAY_ON = 0x29,
++
++ JBT_REG_RGB_FORMAT = 0x3a,
++ JBT_REG_QUAD_RATE = 0x3b,
++
++ JBT_REG_POWER_ON_OFF = 0xb0,
++ JBT_REG_BOOSTER_OP = 0xb1,
++ JBT_REG_BOOSTER_MODE = 0xb2,
++ JBT_REG_BOOSTER_FREQ = 0xb3,
++ JBT_REG_OPAMP_SYSCLK = 0xb4,
++ JBT_REG_VSC_VOLTAGE = 0xb5,
++ JBT_REG_VCOM_VOLTAGE = 0xb6,
++ JBT_REG_EXT_DISPL = 0xb7,
++ JBT_REG_OUTPUT_CONTROL = 0xb8,
++ JBT_REG_DCCLK_DCEV = 0xb9,
++ JBT_REG_DISPLAY_MODE1 = 0xba,
++ JBT_REG_DISPLAY_MODE2 = 0xbb,
++ JBT_REG_DISPLAY_MODE = 0xbc,
++ JBT_REG_ASW_SLEW = 0xbd,
++ JBT_REG_DUMMY_DISPLAY = 0xbe,
++ JBT_REG_DRIVE_SYSTEM = 0xbf,
++
++ JBT_REG_SLEEP_OUT_FR_A = 0xc0,
++ JBT_REG_SLEEP_OUT_FR_B = 0xc1,
++ JBT_REG_SLEEP_OUT_FR_C = 0xc2,
++ JBT_REG_SLEEP_IN_LCCNT_D = 0xc3,
++ JBT_REG_SLEEP_IN_LCCNT_E = 0xc4,
++ JBT_REG_SLEEP_IN_LCCNT_F = 0xc5,
++ JBT_REG_SLEEP_IN_LCCNT_G = 0xc6,
++
++ JBT_REG_GAMMA1_FINE_1 = 0xc7,
++ JBT_REG_GAMMA1_FINE_2 = 0xc8,
++ JBT_REG_GAMMA1_INCLINATION = 0xc9,
++ JBT_REG_GAMMA1_BLUE_OFFSET = 0xca,
++
++ /* VGA */
++ JBT_REG_BLANK_CONTROL = 0xcf,
++ JBT_REG_BLANK_TH_TV = 0xd0,
++ JBT_REG_CKV_ON_OFF = 0xd1,
++ JBT_REG_CKV_1_2 = 0xd2,
++ JBT_REG_OEV_TIMING = 0xd3,
++ JBT_REG_ASW_TIMING_1 = 0xd4,
++ JBT_REG_ASW_TIMING_2 = 0xd5,
++
++ /* QVGA */
++ JBT_REG_BLANK_CONTROL_QVGA = 0xd6,
++ JBT_REG_BLANK_TH_TV_QVGA = 0xd7,
++ JBT_REG_CKV_ON_OFF_QVGA = 0xd8,
++ JBT_REG_CKV_1_2_QVGA = 0xd9,
++ JBT_REG_OEV_TIMING_QVGA = 0xde,
++ JBT_REG_ASW_TIMING_1_QVGA = 0xdf,
++ JBT_REG_ASW_TIMING_2_QVGA = 0xe0,
++
++
++ JBT_REG_HCLOCK_VGA = 0xec,
++ JBT_REG_HCLOCK_QVGA = 0xed,
++
++};
++
++enum jbt_state {
++ JBT_STATE_DEEP_STANDBY,
++ JBT_STATE_SLEEP,
++ JBT_STATE_NORMAL,
++ JBT_STATE_QVGA_NORMAL,
++};
++
++static const char *jbt_state_names[] = {
++ [JBT_STATE_DEEP_STANDBY] = "deep-standby",
++ [JBT_STATE_SLEEP] = "sleep",
++ [JBT_STATE_NORMAL] = "normal",
++ [JBT_STATE_QVGA_NORMAL] = "qvga-normal",
++};
++
++struct jbt_info {
++ enum jbt_state state, last_state;
++ struct spi_device *spi_dev;
++ struct mutex lock; /* protects tx_buf and reg_cache */
++ u16 tx_buf[8];
++ u16 reg_cache[0xEE];
++};
++
++#define JBT_COMMAND 0x000
++#define JBT_DATA 0x100
++
++static int jbt_reg_write_nodata(struct jbt_info *jbt, u8 reg)
++{
++ int rc;
++
++ mutex_lock(&jbt->lock);
++
++ jbt->tx_buf[0] = JBT_COMMAND | reg;
++ rc = spi_write(jbt->spi_dev, (u8 *)jbt->tx_buf,
++ 1*sizeof(u16));
++ if (rc == 0)
++ jbt->reg_cache[reg] = 0;
++
++ mutex_unlock(&jbt->lock);
++
++ return rc;
++}
++
++
++static int jbt_reg_write(struct jbt_info *jbt, u8 reg, u8 data)
++{
++ int rc;
++
++ mutex_lock(&jbt->lock);
++
++ jbt->tx_buf[0] = JBT_COMMAND | reg;
++ jbt->tx_buf[1] = JBT_DATA | data;
++ rc = spi_write(jbt->spi_dev, (u8 *)jbt->tx_buf,
++ 2*sizeof(u16));
++ if (rc == 0)
++ jbt->reg_cache[reg] = data;
++
++ mutex_unlock(&jbt->lock);
++
++ return rc;
++}
++
++static int jbt_reg_write16(struct jbt_info *jbt, u8 reg, u16 data)
++{
++ int rc;
++
++ mutex_lock(&jbt->lock);
++
++ jbt->tx_buf[0] = JBT_COMMAND | reg;
++ jbt->tx_buf[1] = JBT_DATA | (data >> 8);
++ jbt->tx_buf[2] = JBT_DATA | (data & 0xff);
++
++ rc = spi_write(jbt->spi_dev, (u8 *)jbt->tx_buf,
++ 3*sizeof(u16));
++ if (rc == 0)
++ jbt->reg_cache[reg] = data;
++
++ mutex_unlock(&jbt->lock);
++
++ return rc;
++}
++
++static int jbt_init_regs(struct jbt_info *jbt, int qvga)
++{
++ int rc;
++
++ dev_dbg(&jbt->spi_dev->dev, "entering %cVGA mode\n", qvga ? 'Q' : ' ');
++
++ rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE1, 0x01);
++ rc |= jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE2, 0x00);
++ rc |= jbt_reg_write(jbt, JBT_REG_RGB_FORMAT, 0x60);
++ rc |= jbt_reg_write(jbt, JBT_REG_DRIVE_SYSTEM, 0x10);
++ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_OP, 0x56);
++ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_MODE, 0x33);
++ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11);
++ rc |= jbt_reg_write(jbt, JBT_REG_OPAMP_SYSCLK, 0x02);
++ rc |= jbt_reg_write(jbt, JBT_REG_VSC_VOLTAGE, 0x2b);
++ rc |= jbt_reg_write(jbt, JBT_REG_VCOM_VOLTAGE, 0x40);
++ rc |= jbt_reg_write(jbt, JBT_REG_EXT_DISPL, 0x03);
++ rc |= jbt_reg_write(jbt, JBT_REG_DCCLK_DCEV, 0x04);
++ /*
++ * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
++ * to avoid red / blue flicker
++ */
++ rc |= jbt_reg_write(jbt, JBT_REG_ASW_SLEW, 0x04);
++ rc |= jbt_reg_write(jbt, JBT_REG_DUMMY_DISPLAY, 0x00);
++
++ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_A, 0x11);
++ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_B, 0x11);
++ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_C, 0x11);
++ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
++ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
++ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
++ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
++
++ rc |= jbt_reg_write16(jbt, JBT_REG_GAMMA1_FINE_1, 0x5533);
++ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_FINE_2, 0x00);
++ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_INCLINATION, 0x00);
++ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
++
++ if (!qvga) {
++ rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_VGA, 0x1f0);
++ rc |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL, 0x02);
++ rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804);
++
++ rc |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF, 0x01);
++ rc |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2, 0x0000);
++
++ rc |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING, 0x0d0e);
++ rc |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1, 0x11a4);
++ rc |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2, 0x0e);
++ } else {
++ rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff);
++ rc |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL_QVGA, 0x02);
++ rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV_QVGA, 0x0804);
++
++ rc |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF_QVGA, 0x01);
++ rc |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2_QVGA, 0x0008);
++
++ rc |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING_QVGA, 0x050a);
++ rc |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1_QVGA, 0x0a19);
++ rc |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2_QVGA, 0x0a);
++ }
++
++ return rc ? -EIO : 0;
++}
++
++static int standby_to_sleep(struct jbt_info *jbt)
++{
++ int rc;
++
++ /* three times command zero */
++ rc = jbt_reg_write_nodata(jbt, 0x00);
++ mdelay(1);
++ rc |= jbt_reg_write_nodata(jbt, 0x00);
++ mdelay(1);
++ rc |= jbt_reg_write_nodata(jbt, 0x00);
++ mdelay(1);
++
++ /* deep standby out */
++ rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x17);
++
++ return rc ? -EIO : 0;
++}
++
++static int sleep_to_normal(struct jbt_info *jbt)
++{
++ int rc;
++
++ /* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
++ rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x80);
++
++ /* Quad mode off */
++ rc |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x00);
++
++ /* AVDD on, XVDD on */
++ rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x16);
++
++ /* Output control */
++ rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0xfff9);
++
++ /* Sleep mode off */
++ rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_OUT);
++
++ /* initialize register set */
++ rc |= jbt_init_regs(jbt, 0);
++
++ return rc ? -EIO : 0;
++}
++
++static int sleep_to_qvga_normal(struct jbt_info *jbt)
++{
++ int rc;
++
++ /* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
++ rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x81);
++
++ /* Quad mode on */
++ rc |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x22);
++
++ /* AVDD on, XVDD on */
++ rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x16);
++
++ /* Output control */
++ rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0xfff9);
++
++ /* Sleep mode off */
++ rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_OUT);
++
++ /* initialize register set for qvga*/
++ rc |= jbt_init_regs(jbt, 1);
++
++ return rc ? -EIO : 0;
++}
++
++static int normal_to_sleep(struct jbt_info *jbt)
++{
++ int rc;
++
++ rc = jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF);
++ rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0x8002);
++ rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_IN);
++
++ return rc ? -EIO : 0;
++}
++
++static int sleep_to_standby(struct jbt_info *jbt)
++{
++ return jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x00);
++}
++
++/* frontend function */
++int jbt6k74_enter_state(struct jbt_info *jbt, enum jbt_state new_state)
++{
++ int rc = -EINVAL;
++
++ dev_dbg(&jbt->spi_dev->dev, "entering (old_state=%u, "
++ "new_state=%u)\n", jbt->state, new_state);
++
++ switch (jbt->state) {
++ case JBT_STATE_DEEP_STANDBY:
++ switch (new_state) {
++ case JBT_STATE_DEEP_STANDBY:
++ rc = 0;
++ break;
++ case JBT_STATE_SLEEP:
++ rc = standby_to_sleep(jbt);
++ break;
++ case JBT_STATE_NORMAL:
++ /* first transition into sleep */
++ rc = standby_to_sleep(jbt);
++ /* then transition into normal */
++ rc |= sleep_to_normal(jbt);
++ break;
++ case JBT_STATE_QVGA_NORMAL:
++ /* first transition into sleep */
++ rc = standby_to_sleep(jbt);
++ /* then transition into normal */
++ rc |= sleep_to_qvga_normal(jbt);
++ break;
++ }
++ break;
++ case JBT_STATE_SLEEP:
++ switch (new_state) {
++ case JBT_STATE_SLEEP:
++ rc = 0;
++ break;
++ case JBT_STATE_DEEP_STANDBY:
++ rc = sleep_to_standby(jbt);
++ break;
++ case JBT_STATE_NORMAL:
++ rc = sleep_to_normal(jbt);
++ break;
++ case JBT_STATE_QVGA_NORMAL:
++ rc = sleep_to_qvga_normal(jbt);
++ break;
++ }
++ break;
++ case JBT_STATE_NORMAL:
++ switch (new_state) {
++ case JBT_STATE_NORMAL:
++ rc = 0;
++ break;
++ case JBT_STATE_DEEP_STANDBY:
++ /* first transition into sleep */
++ rc = normal_to_sleep(jbt);
++ /* then transition into deep standby */
++ rc |= sleep_to_standby(jbt);
++ break;
++ case JBT_STATE_SLEEP:
++ rc = normal_to_sleep(jbt);
++ break;
++ case JBT_STATE_QVGA_NORMAL:
++ /* first transition into sleep */
++ rc = normal_to_sleep(jbt);
++ /* second transition into deep standby */
++ rc |= sleep_to_standby(jbt);
++ /* third transition into sleep */
++ rc |= standby_to_sleep(jbt);
++ /* fourth transition into normal */
++ rc |= sleep_to_qvga_normal(jbt);
++ break;
++ }
++ break;
++ case JBT_STATE_QVGA_NORMAL:
++ switch (new_state) {
++ case JBT_STATE_QVGA_NORMAL:
++ rc = 0;
++ break;
++ case JBT_STATE_DEEP_STANDBY:
++ /* first transition into sleep */
++ rc = normal_to_sleep(jbt);
++ /* then transition into deep standby */
++ rc |= sleep_to_standby(jbt);
++ break;
++ case JBT_STATE_SLEEP:
++ rc = normal_to_sleep(jbt);
++ break;
++ case JBT_STATE_NORMAL:
++ /* first transition into sleep */
++ rc = normal_to_sleep(jbt);
++ /* second transition into deep standby */
++ rc |= sleep_to_standby(jbt);
++ /* third transition into sleep */
++ rc |= standby_to_sleep(jbt);
++ /* fourth transition into normal */
++ rc |= sleep_to_normal(jbt);
++ break;
++ }
++ break;
++ }
++ if (rc == 0)
++ jbt->state = new_state;
++
++ return rc;
++}
++EXPORT_SYMBOL_GPL(jbt6k74_enter_state);
++
++int jbt6k74_display_onoff(struct jbt_info *jbt, int on)
++{
++ if (on)
++ return jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_ON);
++ else
++ return jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF);
++}
++EXPORT_SYMBOL_GPL(jbt6k74_display_onoff);
++
++static ssize_t state_read(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct jbt_info *jbt = dev_get_drvdata(dev);
++
++ if (jbt->state >= ARRAY_SIZE(jbt_state_names))
++ return -EIO;
++
++ return sprintf(buf, "%s\n", jbt_state_names[jbt->state]);
++}
++
++static ssize_t state_write(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct jbt_info *jbt = dev_get_drvdata(dev);
++ int i, rc;
++
++ for (i = 0; i < ARRAY_SIZE(jbt_state_names); i++) {
++ if (!strncmp(buf, jbt_state_names[i],
++ strlen(jbt_state_names[i]))) {
++ rc = jbt6k74_enter_state(jbt, i);
++ if (rc)
++ return rc;
++ switch (i) {
++ case JBT_STATE_NORMAL:
++ case JBT_STATE_QVGA_NORMAL:
++ /* Enable display again after deep-standby */
++ rc = jbt6k74_display_onoff(jbt, 1);
++ if (rc)
++ return rc;
++ break;
++ default:
++ break;
++ }
++ return count;
++ }
++ }
++
++ return -EINVAL;
++}
++
++static DEVICE_ATTR(state, 0644, state_read, state_write);
++
++static int reg_by_string(const char *name)
++{
++ if (!strcmp(name, "gamma_fine1"))
++ return JBT_REG_GAMMA1_FINE_1;
++ else if (!strcmp(name, "gamma_fine2"))
++ return JBT_REG_GAMMA1_FINE_2;
++ else if (!strcmp(name, "gamma_inclination"))
++ return JBT_REG_GAMMA1_INCLINATION;
++ else
++ return JBT_REG_GAMMA1_BLUE_OFFSET;
++}
++
++static ssize_t gamma_read(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct jbt_info *jbt = dev_get_drvdata(dev);
++ int reg = reg_by_string(attr->attr.name);
++ u16 val;
++
++ mutex_lock(&jbt->lock);
++ val = jbt->reg_cache[reg];
++ mutex_unlock(&jbt->lock);
++
++ return sprintf(buf, "0x%04x\n", val);
++}
++
++static ssize_t gamma_write(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct jbt_info *jbt = dev_get_drvdata(dev);
++ int reg = reg_by_string(attr->attr.name);
++ unsigned long val = simple_strtoul(buf, NULL, 10);
++
++ jbt_reg_write(jbt, reg, val & 0xff);
++
++ return count;
++}
++
++static DEVICE_ATTR(gamma_fine1, 0644, gamma_read, gamma_write);
++static DEVICE_ATTR(gamma_fine2, 0644, gamma_read, gamma_write);
++static DEVICE_ATTR(gamma_inclination, 0644, gamma_read, gamma_write);
++static DEVICE_ATTR(gamma_blue_offset, 0644, gamma_read, gamma_write);
++
++static struct attribute *jbt_sysfs_entries[] = {
++ &dev_attr_state.attr,
++ &dev_attr_gamma_fine1.attr,
++ &dev_attr_gamma_fine2.attr,
++ &dev_attr_gamma_inclination.attr,
++ &dev_attr_gamma_blue_offset.attr,
++ NULL,
++};
++
++static struct attribute_group jbt_attr_group = {
++ .name = NULL,
++ .attrs = jbt_sysfs_entries,
++};
++
++/* linux device model infrastructure */
++
++static int __devinit jbt_probe(struct spi_device *spi)
++{
++ int rc;
++ struct jbt_info *jbt;
++
++ /* the controller doesn't have a MISO pin; we can't do detection */
++
++ spi->mode = SPI_CPOL | SPI_CPHA;
++ spi->bits_per_word = 9;
++
++ rc = spi_setup(spi);
++ if (rc < 0) {
++ dev_err(&spi->dev,
++ "error during spi_setup of jbt6k74 driver\n");
++ return rc;
++ }
++
++ jbt = kzalloc(sizeof(*jbt), GFP_KERNEL);
++ if (!jbt)
++ return -ENOMEM;
++
++ jbt->spi_dev = spi;
++ jbt->state = JBT_STATE_DEEP_STANDBY;
++ mutex_init(&jbt->lock);
++
++ dev_set_drvdata(&spi->dev, jbt);
++
++ rc = jbt6k74_enter_state(jbt, JBT_STATE_NORMAL);
++ if (rc < 0) {
++ dev_err(&spi->dev, "cannot enter NORMAL state\n");
++ goto err_free_drvdata;
++ }
++
++ rc = jbt6k74_display_onoff(jbt, 1);
++ if (rc < 0) {
++ dev_err(&spi->dev, "cannot switch display on\n");
++ goto err_standby;
++ }
++
++ rc = sysfs_create_group(&spi->dev.kobj, &jbt_attr_group);
++ if (rc < 0) {
++ dev_err(&spi->dev, "cannot create sysfs group\n");
++ goto err_off;
++ }
++
++ return 0;
++
++err_off:
++ jbt6k74_display_onoff(jbt, 0);
++err_standby:
++ jbt6k74_enter_state(jbt, JBT_STATE_DEEP_STANDBY);
++err_free_drvdata:
++ dev_set_drvdata(&spi->dev, NULL);
++ kfree(jbt);
++
++ return rc;
++}
++
++static int __devexit jbt_remove(struct spi_device *spi)
++{
++ struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
++
++ /* We don't want to switch off the display in case the user
++ * accidentially onloads the module (whose use count normally is 0) */
++
++ sysfs_remove_group(&spi->dev.kobj, &jbt_attr_group);
++ dev_set_drvdata(&spi->dev, NULL);
++ kfree(jbt);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++static int jbt_suspend(struct spi_device *spi, pm_message_t state)
++{
++ struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
++
++ /* Save mode for resume */
++ jbt->last_state = jbt->state;
++ jbt6k74_enter_state(jbt, JBT_STATE_DEEP_STANDBY);
++
++ return 0;
++}
++
++static int jbt_resume(struct spi_device *spi)
++{
++ struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
++
++ jbt6k74_enter_state(jbt, jbt->last_state);
++
++ switch (jbt->last_state) {
++ case JBT_STATE_NORMAL:
++ case JBT_STATE_QVGA_NORMAL:
++ jbt6k74_display_onoff(jbt, 1);
++ break;
++ default:
++ break;
++ }
++
++ return 0;
++}
++#else
++#define jbt_suspend NULL
++#define jbt_resume NULL
++#endif
++
++static struct spi_driver jbt6k74_driver = {
++ .driver = {
++ .name = "jbt6k74",
++ .owner = THIS_MODULE,
++ },
++
++ .probe = jbt_probe,
++ .remove = __devexit_p(jbt_remove),
++ .suspend = jbt_suspend,
++ .resume = jbt_resume,
++};
++
++static int __init jbt_init(void)
++{
++ return spi_register_driver(&jbt6k74_driver);
++}
++
++static void __exit jbt_exit(void)
++{
++ spi_unregister_driver(&jbt6k74_driver);
++}
++
++MODULE_DESCRIPTION("SPI driver for tpo JBT6K74-AS LCM control interface");
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_LICENSE("GPL");
++
++module_init(jbt_init);
++module_exit(jbt_exit);
+--
+1.5.6.5
+
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 17:52:04 +0000