summaryrefslogtreecommitdiff
path: root/target/linux/rb532/files/arch/mips/rb500/prom.c
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/rb532/files/arch/mips/rb500/prom.c')
-rw-r--r--target/linux/rb532/files/arch/mips/rb500/prom.c165
1 files changed, 165 insertions, 0 deletions
diff --git a/target/linux/rb532/files/arch/mips/rb500/prom.c b/target/linux/rb532/files/arch/mips/rb500/prom.c
new file mode 100644
index 0000000000..1978b0f17c
--- /dev/null
+++ b/target/linux/rb532/files/arch/mips/rb500/prom.c
@@ -0,0 +1,165 @@
+/*
+* prom.c
+**********************************************************************
+* P . Sadik Oct 10, 2003
+*
+* Started change log
+* idt_cpu_freq is make a kernel configuration parameter
+* idt_cpu_freq is exported so that other modules can use it.
+* Code cleanup
+**********************************************************************
+* P. Sadik Oct 20, 2003
+*
+* Removed NVRAM code from here, since they are already available under
+* nvram directory.
+* Added serial port initialisation.
+**********************************************************************
+**********************************************************************
+* P. Sadik Oct 30, 2003
+*
+* Added reset_cons_port
+**********************************************************************
+
+ P.Christeas, 2005-2006
+ Port to 2.6, add 2.6 cmdline parsing
+
+*/
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/console.h>
+#include <asm/bootinfo.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <asm/rc32434/ddr.h>
+
+#define PROM_ENTRY(x) (0xbfc00000+((x)*8))
+extern void __init setup_serial_port(void);
+
+unsigned int idt_cpu_freq = 132000000;
+EXPORT_SYMBOL(idt_cpu_freq);
+unsigned int board_type = 500;
+EXPORT_SYMBOL(board_type);
+unsigned int gpio_bootup_state = 0;
+EXPORT_SYMBOL(gpio_bootup_state);
+
+
+char mips_mac_address[18] = "08:00:06:05:40:01";
+EXPORT_SYMBOL(mips_mac_address);
+
+/* what to append to cmdline when button is [not] pressed */
+#define GPIO_INIT_NOBUTTON ""
+#define GPIO_INIT_BUTTON " 2"
+
+#ifdef CONFIG_MIKROTIK_RB500
+unsigned soft_reboot = 0;
+EXPORT_SYMBOL(soft_reboot);
+#endif
+
+#define SR_NMI 0x00180000 /* NMI */
+#define SERIAL_SPEED_ENTRY 0x00000001
+
+#ifdef CONFIG_REMOTE_DEBUG
+extern int remote_debug;
+#endif
+
+extern unsigned long mips_machgroup;
+extern unsigned long mips_machtype;
+
+#define FREQ_TAG "HZ="
+#define GPIO_TAG "gpio="
+#define KMAC_TAG "kmac="
+#define MEM_TAG "mem="
+#define BOARD_TAG "board="
+#define IGNORE_CMDLINE_MEM 1
+#define DEBUG_DDR
+
+void parse_soft_settings(unsigned *ptr, unsigned size);
+void parse_hard_settings(unsigned *ptr, unsigned size);
+
+void __init prom_setup_cmdline(void);
+
+void __init prom_init(void)
+{
+ DDR_t ddr = (DDR_t) DDR_VirtualAddress; /* define the pointer to the DDR registers */
+ phys_t memsize = 0-ddr->ddrmask;
+
+ /* this should be the very first message, even before serial is properly initialized */
+ prom_setup_cmdline();
+ setup_serial_port();
+
+ mips_machgroup = MACH_GROUP_MIKROTIK;
+ soft_reboot = read_c0_status() & SR_NMI;
+ pm_power_off = NULL;
+
+ /*
+ * give all RAM to boot allocator,
+ * except for the first 0x400 and the last 0x200 bytes
+ */
+ add_memory_region(ddr->ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM);
+}
+
+void prom_free_prom_memory(void)
+{
+ /* FIXME: STUB */
+}
+
+extern char _image_cmdline;
+void __init prom_setup_cmdline(void){
+ char cmd_line[CL_SIZE];
+ char *cp;
+ int prom_argc;
+ char **prom_argv, **prom_envp;
+ int i;
+
+ prom_argc = fw_arg0;
+ prom_argv = (char **) fw_arg1;
+ prom_envp = (char **) fw_arg2;
+
+ cp=cmd_line;
+ /* Note: it is common that parameters start at argv[1] and not argv[0],
+ however, our elf loader starts at [0] */
+ for(i=0;i<prom_argc;i++){
+ if (strncmp(prom_argv[i], FREQ_TAG, sizeof(FREQ_TAG) - 1) == 0) {
+ idt_cpu_freq = simple_strtoul(prom_argv[i] + sizeof(FREQ_TAG) - 1, 0, 10);
+ continue;
+ }
+#ifdef IGNORE_CMDLINE_MEM
+ /* parses out the "mem=xx" arg */
+ if (strncmp(prom_argv[i], MEM_TAG, sizeof(MEM_TAG) - 1) == 0) {
+ continue;
+ }
+#endif
+ if (i>0) *(cp++) = ' ';
+ if (strncmp(prom_argv[i], BOARD_TAG, sizeof(BOARD_TAG) - 1) == 0) {
+ board_type = simple_strtoul(prom_argv[i] + sizeof(BOARD_TAG) - 1, 0, 10);
+ }
+ if (strncmp(prom_argv[i], GPIO_TAG, sizeof(GPIO_TAG) - 1) == 0) {
+ gpio_bootup_state = simple_strtoul(prom_argv[i] + sizeof(GPIO_TAG) - 1, 0, 10);
+ }
+ strcpy(cp,prom_argv[i]);
+ cp+=strlen(prom_argv[i]);
+ }
+ *(cp++) = ' ';
+ strcpy(cp,(&_image_cmdline + 8));
+ cp += strlen(&_image_cmdline);
+
+ i=strlen(arcs_cmdline);
+ if (i>0){
+ *(cp++) = ' ';
+ strcpy(cp,arcs_cmdline);
+ cp+=strlen(arcs_cmdline);
+ }
+ if (gpio_bootup_state&0x02)
+ strcpy(cp,GPIO_INIT_NOBUTTON);
+ else
+ strcpy(cp,GPIO_INIT_BUTTON);
+ cmd_line[CL_SIZE-1] = '\0';
+
+ strcpy(arcs_cmdline,cmd_line);
+}
+