diff options
Diffstat (limited to 'target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.c')
-rw-r--r-- | target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.c | 1265 |
1 files changed, 0 insertions, 1265 deletions
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.c deleted file mode 100644 index 87d3fbbbc2..0000000000 --- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.c +++ /dev/null @@ -1,1265 +0,0 @@ -/* ========================================================================== - * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.c $ - * $Revision: 1.7 $ - * $Date: 2008-11-21 05:39:15 $ - * $Change: 791271 $ - * - * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, - * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless - * otherwise expressly agreed to in writing between Synopsys and you. - * - * The Software IS NOT an item of Licensed Software or Licensed Product under - * any End User Software License Agreement or Agreement for Licensed Product - * with Synopsys or any supplement thereto. You are permitted to use and - * redistribute this Software in source and binary forms, with or without - * modification, provided that redistributions of source code must retain this - * notice. You may not view, use, disclose, copy or distribute this file or - * any information contained herein except pursuant to this license grant from - * Synopsys. If you do not agree with this notice, including the disclaimer - * below, then you are not authorized to use the Software. - * - * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * ========================================================================== */ - -/** @file - * The dwc_otg_driver module provides the initialization and cleanup entry - * points for the DWC_otg driver. This module will be dynamically installed - * after Linux is booted using the insmod command. When the module is - * installed, the dwc_otg_driver_init function is called. When the module is - * removed (using rmmod), the dwc_otg_driver_cleanup function is called. - * - * This module also defines a data structure for the dwc_otg_driver, which is - * used in conjunction with the standard ARM platform_device structure. These - * structures allow the OTG driver to comply with the standard Linux driver - * model in which devices and drivers are registered with a bus driver. This - * has the benefit that Linux can expose attributes of the driver and device - * in its special sysfs file system. Users can then read or write files in - * this file system to perform diagnostics on the driver components or the - * device. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/errno.h> -#include <linux/types.h> -#include <linux/stat.h> /* permission constants */ -#include <linux/version.h> -#include <linux/platform_device.h> - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -# include <linux/irq.h> -#endif - -#include <asm/io.h> - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) -# include <asm/irq.h> -#endif - -#include "linux/dwc_otg_plat.h" -#include "dwc_otg_attr.h" -#include "dwc_otg_driver.h" -#include "dwc_otg_cil.h" -#include "dwc_otg_pcd.h" -#include "dwc_otg_hcd.h" - -#define DWC_DRIVER_VERSION "2.72a 24-JUN-2008" -#define DWC_DRIVER_DESC "HS OTG USB Controller driver" - -static const char dwc_driver_name[] = "dwc_otg"; - -/*-------------------------------------------------------------------------*/ -/* Encapsulate the module parameter settings */ - -static dwc_otg_core_params_t dwc_otg_module_params = { - .opt = -1, - .otg_cap = -1, - .dma_enable = -1, - .dma_desc_enable = -1, - .dma_burst_size = -1, - .speed = -1, - .host_support_fs_ls_low_power = -1, - .host_ls_low_power_phy_clk = -1, - .enable_dynamic_fifo = -1, - .data_fifo_size = -1, - .dev_rx_fifo_size = -1, - .dev_nperio_tx_fifo_size = -1, - .dev_perio_tx_fifo_size = { - /* dev_perio_tx_fifo_size_1 */ - -1, - -1, - -1, - -1, - -1, - -1, - -1, - -1, - -1, - -1, - -1, - -1, - -1, - -1, - -1 - /* 15 */ - }, - .host_rx_fifo_size = -1, - .host_nperio_tx_fifo_size = -1, - .host_perio_tx_fifo_size = -1, - .max_transfer_size = -1, - .max_packet_count = -1, - .host_channels = -1, - .dev_endpoints = -1, - .phy_type = -1, - .phy_utmi_width = -1, - .phy_ulpi_ddr = -1, - .phy_ulpi_ext_vbus = -1, - .i2c_enable = -1, - .ulpi_fs_ls = -1, - .ts_dline = -1, - .en_multiple_tx_fifo = -1, - .dev_tx_fifo_size = { - /* dev_tx_fifo_size */ - -1, - -1, - -1, - -1, - -1, - -1, - -1, - -1, - -1, - -1, - -1, - -1, - -1, - -1, - -1 - /* 15 */ - }, - .thr_ctl = -1, - .tx_thr_length = -1, - .rx_thr_length = -1, - .pti_enable = -1, - .mpi_enable = -1, -}; - -/** - * This function shows the Driver Version. - */ -static ssize_t version_show(struct device_driver *dev, char *buf) -{ - return snprintf(buf, sizeof(DWC_DRIVER_VERSION)+2, "%s\n", - DWC_DRIVER_VERSION); -} -static DRIVER_ATTR(version, S_IRUGO, version_show, NULL); - -/** - * Global Debug Level Mask. - */ -uint32_t g_dbg_lvl = 0; /* OFF */ - -/** - * This function shows the driver Debug Level. - */ -static ssize_t dbg_level_show(struct device_driver *drv, char *buf) -{ - return sprintf(buf, "0x%0x\n", g_dbg_lvl); -} - -/** - * This function stores the driver Debug Level. - */ -static ssize_t dbg_level_store(struct device_driver *drv, const char *buf, - size_t count) -{ - g_dbg_lvl = simple_strtoul(buf, NULL, 16); - return count; -} -static DRIVER_ATTR(debuglevel, S_IRUGO|S_IWUSR, dbg_level_show, dbg_level_store); - -/** - * This function is called during module intialization to verify that - * the module parameters are in a valid state. - */ -static int check_parameters(dwc_otg_core_if_t *core_if) -{ - int i; - int retval = 0; - -/* Checks if the parameter is outside of its valid range of values */ -#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \ - ((dwc_otg_module_params._param_ < (_low_)) || \ - (dwc_otg_module_params._param_ > (_high_))) - -/* If the parameter has been set by the user, check that the parameter value is - * within the value range of values. If not, report a module error. */ -#define DWC_OTG_PARAM_ERR(_param_, _low_, _high_, _string_) \ - do { \ - if (dwc_otg_module_params._param_ != -1) { \ - if (DWC_OTG_PARAM_TEST(_param_, (_low_), (_high_))) { \ - DWC_ERROR("`%d' invalid for parameter `%s'\n", \ - dwc_otg_module_params._param_, _string_); \ - dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \ - retval++; \ - } \ - } \ - } while (0) - - DWC_OTG_PARAM_ERR(opt,0,1,"opt"); - DWC_OTG_PARAM_ERR(otg_cap,0,2,"otg_cap"); - DWC_OTG_PARAM_ERR(dma_enable,0,1,"dma_enable"); - DWC_OTG_PARAM_ERR(dma_desc_enable,0,1,"dma_desc_enable"); - DWC_OTG_PARAM_ERR(speed,0,1,"speed"); - DWC_OTG_PARAM_ERR(host_support_fs_ls_low_power,0,1,"host_support_fs_ls_low_power"); - DWC_OTG_PARAM_ERR(host_ls_low_power_phy_clk,0,1,"host_ls_low_power_phy_clk"); - DWC_OTG_PARAM_ERR(enable_dynamic_fifo,0,1,"enable_dynamic_fifo"); - DWC_OTG_PARAM_ERR(data_fifo_size,32,32768,"data_fifo_size"); - DWC_OTG_PARAM_ERR(dev_rx_fifo_size,16,32768,"dev_rx_fifo_size"); - DWC_OTG_PARAM_ERR(dev_nperio_tx_fifo_size,16,32768,"dev_nperio_tx_fifo_size"); - DWC_OTG_PARAM_ERR(host_rx_fifo_size,16,32768,"host_rx_fifo_size"); - DWC_OTG_PARAM_ERR(host_nperio_tx_fifo_size,16,32768,"host_nperio_tx_fifo_size"); - DWC_OTG_PARAM_ERR(host_perio_tx_fifo_size,16,32768,"host_perio_tx_fifo_size"); - DWC_OTG_PARAM_ERR(max_transfer_size,2047,524288,"max_transfer_size"); - DWC_OTG_PARAM_ERR(max_packet_count,15,511,"max_packet_count"); - DWC_OTG_PARAM_ERR(host_channels,1,16,"host_channels"); - DWC_OTG_PARAM_ERR(dev_endpoints,1,15,"dev_endpoints"); - DWC_OTG_PARAM_ERR(phy_type,0,2,"phy_type"); - DWC_OTG_PARAM_ERR(phy_ulpi_ddr,0,1,"phy_ulpi_ddr"); - DWC_OTG_PARAM_ERR(phy_ulpi_ext_vbus,0,1,"phy_ulpi_ext_vbus"); - DWC_OTG_PARAM_ERR(i2c_enable,0,1,"i2c_enable"); - DWC_OTG_PARAM_ERR(ulpi_fs_ls,0,1,"ulpi_fs_ls"); - DWC_OTG_PARAM_ERR(ts_dline,0,1,"ts_dline"); - - if (dwc_otg_module_params.dma_burst_size != -1) { - if (DWC_OTG_PARAM_TEST(dma_burst_size,1,1) && - DWC_OTG_PARAM_TEST(dma_burst_size,4,4) && - DWC_OTG_PARAM_TEST(dma_burst_size,8,8) && - DWC_OTG_PARAM_TEST(dma_burst_size,16,16) && - DWC_OTG_PARAM_TEST(dma_burst_size,32,32) && - DWC_OTG_PARAM_TEST(dma_burst_size,64,64) && - DWC_OTG_PARAM_TEST(dma_burst_size,128,128) && - DWC_OTG_PARAM_TEST(dma_burst_size,256,256)) { - DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n", - dwc_otg_module_params.dma_burst_size); - dwc_otg_module_params.dma_burst_size = 32; - retval++; - } - - { - uint8_t brst_sz = 0; - while(dwc_otg_module_params.dma_burst_size > 1) { - brst_sz ++; - dwc_otg_module_params.dma_burst_size >>= 1; - } - dwc_otg_module_params.dma_burst_size = brst_sz; - } - } - - if (dwc_otg_module_params.phy_utmi_width != -1) { - if (DWC_OTG_PARAM_TEST(phy_utmi_width, 8, 8) && - DWC_OTG_PARAM_TEST(phy_utmi_width, 16, 16)) { - DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n", - dwc_otg_module_params.phy_utmi_width); - dwc_otg_module_params.phy_utmi_width = 16; - retval++; - } - } - - for (i = 0; i < 15; i++) { - /** @todo should be like above */ - //DWC_OTG_PARAM_ERR(dev_perio_tx_fifo_size[i], 4, 768, "dev_perio_tx_fifo_size"); - if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) { - if (DWC_OTG_PARAM_TEST(dev_perio_tx_fifo_size[i], 4, 768)) { - DWC_ERROR("`%d' invalid for parameter `%s_%d'\n", - dwc_otg_module_params.dev_perio_tx_fifo_size[i], "dev_perio_tx_fifo_size", i); - dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default; - retval++; - } - } - } - - DWC_OTG_PARAM_ERR(en_multiple_tx_fifo, 0, 1, "en_multiple_tx_fifo"); - - for (i = 0; i < 15; i++) { - /** @todo should be like above */ - //DWC_OTG_PARAM_ERR(dev_tx_fifo_size[i], 4, 768, "dev_tx_fifo_size"); - if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) { - if (DWC_OTG_PARAM_TEST(dev_tx_fifo_size[i], 4, 768)) { - DWC_ERROR("`%d' invalid for parameter `%s_%d'\n", - dwc_otg_module_params.dev_tx_fifo_size[i], "dev_tx_fifo_size", i); - dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default; - retval++; - } - } - } - - DWC_OTG_PARAM_ERR(thr_ctl, 0, 7, "thr_ctl"); - DWC_OTG_PARAM_ERR(tx_thr_length, 8, 128, "tx_thr_length"); - DWC_OTG_PARAM_ERR(rx_thr_length, 8, 128, "rx_thr_length"); - - DWC_OTG_PARAM_ERR(pti_enable,0,1,"pti_enable"); - DWC_OTG_PARAM_ERR(mpi_enable,0,1,"mpi_enable"); - - /* At this point, all module parameters that have been set by the user - * are valid, and those that have not are left unset. Now set their - * default values and/or check the parameters against the hardware - * configurations of the OTG core. */ - -/* This sets the parameter to the default value if it has not been set by the - * user */ -#define DWC_OTG_PARAM_SET_DEFAULT(_param_) \ - ({ \ - int changed = 1; \ - if (dwc_otg_module_params._param_ == -1) { \ - changed = 0; \ - dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \ - } \ - changed; \ - }) - -/* This checks the macro agains the hardware configuration to see if it is - * valid. It is possible that the default value could be invalid. In this - * case, it will report a module error if the user touched the parameter. - * Otherwise it will adjust the value without any error. */ -#define DWC_OTG_PARAM_CHECK_VALID(_param_, _str_, _is_valid_, _set_valid_) \ - ({ \ - int changed = DWC_OTG_PARAM_SET_DEFAULT(_param_); \ - int error = 0; \ - if (!(_is_valid_)) { \ - if (changed) { \ - DWC_ERROR("`%d' invalid for parameter `%s'. Check HW configuration.\n", dwc_otg_module_params._param_, _str_); \ - error = 1; \ - } \ - dwc_otg_module_params._param_ = (_set_valid_); \ - } \ - error; \ - }) - - /* OTG Cap */ - retval += DWC_OTG_PARAM_CHECK_VALID(otg_cap, "otg_cap", - ({ - int valid; - valid = 1; - switch (dwc_otg_module_params.otg_cap) { - case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE: - if (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) - valid = 0; - break; - case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE: - if ((core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) && - (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) && - (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) && - (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) { - valid = 0; - } - break; - case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE: - /* always valid */ - break; - } - valid; - }), - (((core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) || - (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) || - (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) || - (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ? - DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE : - DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE)); - - retval += DWC_OTG_PARAM_CHECK_VALID(dma_enable, "dma_enable", - ((dwc_otg_module_params.dma_enable == 1) && (core_if->hwcfg2.b.architecture == 0)) ? 0 : 1, - 0); - - retval += DWC_OTG_PARAM_CHECK_VALID(dma_desc_enable, "dma_desc_enable", - ((dwc_otg_module_params.dma_desc_enable == 1) && - ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.desc_dma == 0))) ? 0 : 1, - 0); - - retval += DWC_OTG_PARAM_CHECK_VALID(opt, "opt", 1, 0); - - DWC_OTG_PARAM_SET_DEFAULT(dma_burst_size); - - retval += DWC_OTG_PARAM_CHECK_VALID(host_support_fs_ls_low_power, - "host_support_fs_ls_low_power", - 1, 0); - - retval += DWC_OTG_PARAM_CHECK_VALID(enable_dynamic_fifo, - "enable_dynamic_fifo", - ((dwc_otg_module_params.enable_dynamic_fifo == 0) || - (core_if->hwcfg2.b.dynamic_fifo == 1)), 0); - - retval += DWC_OTG_PARAM_CHECK_VALID(data_fifo_size, - "data_fifo_size", - (dwc_otg_module_params.data_fifo_size <= core_if->hwcfg3.b.dfifo_depth), - core_if->hwcfg3.b.dfifo_depth); - - retval += DWC_OTG_PARAM_CHECK_VALID(dev_rx_fifo_size, - "dev_rx_fifo_size", - (dwc_otg_module_params.dev_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)), - dwc_read_reg32(&core_if->core_global_regs->grxfsiz)); - - retval += DWC_OTG_PARAM_CHECK_VALID(dev_nperio_tx_fifo_size, - "dev_nperio_tx_fifo_size", - (dwc_otg_module_params.dev_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)), - (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)); - - retval += DWC_OTG_PARAM_CHECK_VALID(host_rx_fifo_size, - "host_rx_fifo_size", - (dwc_otg_module_params.host_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)), - dwc_read_reg32(&core_if->core_global_regs->grxfsiz)); - - retval += DWC_OTG_PARAM_CHECK_VALID(host_nperio_tx_fifo_size, - "host_nperio_tx_fifo_size", - (dwc_otg_module_params.host_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)), - (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)); - - retval += DWC_OTG_PARAM_CHECK_VALID(host_perio_tx_fifo_size, - "host_perio_tx_fifo_size", - (dwc_otg_module_params.host_perio_tx_fifo_size <= ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))), - ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))); - - retval += DWC_OTG_PARAM_CHECK_VALID(max_transfer_size, - "max_transfer_size", - (dwc_otg_module_params.max_transfer_size < (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))), - ((1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1)); - - retval += DWC_OTG_PARAM_CHECK_VALID(max_packet_count, - "max_packet_count", - (dwc_otg_module_params.max_packet_count < (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))), - ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1)); - - retval += DWC_OTG_PARAM_CHECK_VALID(host_channels, - "host_channels", - (dwc_otg_module_params.host_channels <= (core_if->hwcfg2.b.num_host_chan + 1)), - (core_if->hwcfg2.b.num_host_chan + 1)); - - retval += DWC_OTG_PARAM_CHECK_VALID(dev_endpoints, - "dev_endpoints", - (dwc_otg_module_params.dev_endpoints <= (core_if->hwcfg2.b.num_dev_ep)), - core_if->hwcfg2.b.num_dev_ep); - -/* - * Define the following to disable the FS PHY Hardware checking. This is for - * internal testing only. - * - * #define NO_FS_PHY_HW_CHECKS - */ - -#ifdef NO_FS_PHY_HW_CHECKS - retval += DWC_OTG_PARAM_CHECK_VALID(phy_type, - "phy_type", 1, 0); -#else - retval += DWC_OTG_PARAM_CHECK_VALID(phy_type, - "phy_type", - ({ - int valid = 0; - if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_UTMI) && - ((core_if->hwcfg2.b.hs_phy_type == 1) || - (core_if->hwcfg2.b.hs_phy_type == 3))) { - valid = 1; - } - else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_ULPI) && - ((core_if->hwcfg2.b.hs_phy_type == 2) || - (core_if->hwcfg2.b.hs_phy_type == 3))) { - valid = 1; - } - else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) && - (core_if->hwcfg2.b.fs_phy_type == 1)) { - valid = 1; - } - valid; - }), - ({ - int set = DWC_PHY_TYPE_PARAM_FS; - if (core_if->hwcfg2.b.hs_phy_type) { - if ((core_if->hwcfg2.b.hs_phy_type == 3) || - (core_if->hwcfg2.b.hs_phy_type == 1)) { - set = DWC_PHY_TYPE_PARAM_UTMI; - } - else { - set = DWC_PHY_TYPE_PARAM_ULPI; - } - } - set; - })); -#endif - - retval += DWC_OTG_PARAM_CHECK_VALID(speed, "speed", - (dwc_otg_module_params.speed == 0) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1, - dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS ? 1 : 0); - - retval += DWC_OTG_PARAM_CHECK_VALID(host_ls_low_power_phy_clk, - "host_ls_low_power_phy_clk", - ((dwc_otg_module_params.host_ls_low_power_phy_clk == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1), - ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ)); - - DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ddr); - DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ext_vbus); - DWC_OTG_PARAM_SET_DEFAULT(phy_utmi_width); - DWC_OTG_PARAM_SET_DEFAULT(ulpi_fs_ls); - DWC_OTG_PARAM_SET_DEFAULT(ts_dline); - -#ifdef NO_FS_PHY_HW_CHECKS - retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable, "i2c_enable", 1, 0); -#else - retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable, - "i2c_enable", - (dwc_otg_module_params.i2c_enable == 1) && (core_if->hwcfg3.b.i2c == 0) ? 0 : 1, - 0); -#endif - - for (i = 0; i < 15; i++) { - int changed = 1; - int error = 0; - - if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] == -1) { - changed = 0; - dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default; - } - if (!(dwc_otg_module_params.dev_perio_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) { - if (changed) { - DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i], i); - error = 1; - } - dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]); - } - retval += error; - } - - retval += DWC_OTG_PARAM_CHECK_VALID(en_multiple_tx_fifo, "en_multiple_tx_fifo", - ((dwc_otg_module_params.en_multiple_tx_fifo == 1) && (core_if->hwcfg4.b.ded_fifo_en == 0)) ? 0 : 1, - 0); - - for (i = 0; i < 15; i++) { - int changed = 1; - int error = 0; - - if (dwc_otg_module_params.dev_tx_fifo_size[i] == -1) { - changed = 0; - dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default; - } - if (!(dwc_otg_module_params.dev_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) { - if (changed) { - DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_tx_fifo_size[i], i); - error = 1; - } - dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]); - } - retval += error; - } - - retval += DWC_OTG_PARAM_CHECK_VALID(thr_ctl, "thr_ctl", - ((dwc_otg_module_params.thr_ctl != 0) && ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.ded_fifo_en == 0))) ? 0 : 1, - 0); - - DWC_OTG_PARAM_SET_DEFAULT(tx_thr_length); - DWC_OTG_PARAM_SET_DEFAULT(rx_thr_length); - - retval += DWC_OTG_PARAM_CHECK_VALID(pti_enable, "pti_enable", - ((dwc_otg_module_params.pti_enable == 0) || ((dwc_otg_module_params.pti_enable == 1) && (core_if->snpsid >= 0x4F54272A))) ? 1 : 0, - 0); - - retval += DWC_OTG_PARAM_CHECK_VALID(mpi_enable, "mpi_enable", - ((dwc_otg_module_params.mpi_enable == 0) || ((dwc_otg_module_params.mpi_enable == 1) && (core_if->hwcfg2.b.multi_proc_int == 1))) ? 1 : 0, - 0); - return retval; -} - -/** - * This function is the top level interrupt handler for the Common - * (Device and host modes) interrupts. - */ -static irqreturn_t dwc_otg_common_irq(int irq, void *dev -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) - , struct pt_regs *r -#endif - ) -{ - dwc_otg_device_t *otg_dev = dev; - int32_t retval = IRQ_NONE; - - retval = dwc_otg_handle_common_intr(otg_dev->core_if); - return IRQ_RETVAL(retval); -} - -/** - * This function is called when a platform_device is unregistered with the - * dwc_otg_driver. This happens, for example, when the rmmod command is - * executed. The device may or may not be electrically present. If it is - * present, the driver stops device processing. Any resources used on behalf - * of this device are freed. - * - * @param[in] pdev - */ -static int dwc_otg_driver_remove(struct platform_device *pdev) -{ - dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev); - DWC_DEBUGPL(DBG_ANY, "%s(%p)\n", __func__, pdev); - - if (!otg_dev) { - /* Memory allocation for the dwc_otg_device failed. */ - DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); - return 0; - } - - /* - * Free the IRQ - */ - if (otg_dev->common_irq_installed) { - free_irq(otg_dev->irq, otg_dev); - } - -#ifndef DWC_DEVICE_ONLY - if (otg_dev->hcd) { - dwc_otg_hcd_remove(&pdev->dev); - } else { - DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); - return 0; - } -#endif - -#ifndef DWC_HOST_ONLY - if (otg_dev->pcd) { - dwc_otg_pcd_remove(&pdev->dev); - } -#endif - if (otg_dev->core_if) { - dwc_otg_cil_remove(otg_dev->core_if); - } - - /* - * Remove the device attributes - */ - dwc_otg_attr_remove(otg_dev->parent); - - /* Disable USB port */ - dwc_write_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0xe00), 0xf); - - /* - * Return the memory. - */ - if (otg_dev->base) { - iounmap(otg_dev->base); - } - - if (otg_dev->phys_addr != 0) { - release_mem_region(otg_dev->phys_addr, otg_dev->base_len); - } - - kfree(otg_dev); - - /* - * Clear the drvdata pointer. - */ - platform_set_drvdata(pdev, NULL); - - return 0; -} - -/** - * This function is called when an platform_device is bound to a - * dwc_otg_driver. It creates the driver components required to - * control the device (CIL, HCD, and PCD) and it initializes the - * device. The driver components are stored in a dwc_otg_device - * structure. A reference to the dwc_otg_device is saved in the - * platform_device. This allows the driver to access the dwc_otg_device - * structure on subsequent calls to driver methods for this device. - * - * @param[in] pdev platform_device definition - */ -static int dwc_otg_driver_probe(struct platform_device *pdev) -{ - int retval = 0; - uint32_t snpsid; - dwc_otg_device_t *otg_dev; - struct resource *res; - - dev_dbg(&pdev->dev, "dwc_otg_driver_probe(%p)\n", pdev); - - otg_dev= kzalloc(sizeof(dwc_otg_device_t), GFP_KERNEL); - if (!otg_dev) { - dev_err(&pdev->dev, "kmalloc of dwc_otg_device failed\n"); - retval = -ENOMEM; - goto fail; - } - - otg_dev->reg_offset = 0xFFFFFFFF; - - /* - * Retrieve the memory and IRQ resources. - */ - otg_dev->irq = platform_get_irq(pdev, 0); - if (otg_dev->irq <= 0) { - dev_err(&pdev->dev, "no device irq\n"); - retval = -EINVAL; - goto fail; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "no CSR address\n"); - retval = -EINVAL; - goto fail; - } - - otg_dev->parent = &pdev->dev; - otg_dev->phys_addr = res->start; - otg_dev->base_len = res->end - res->start + 1; - if (request_mem_region(otg_dev->phys_addr, - otg_dev->base_len, - dwc_driver_name) == NULL) { - dev_err(&pdev->dev, "request_mem_region failed\n"); - retval = -EBUSY; - goto fail; - } - - /* - * Map the DWC_otg Core memory into virtual address space. - */ - otg_dev->base = ioremap(otg_dev->phys_addr, otg_dev->base_len); - if (!otg_dev->base) { - dev_err(&pdev->dev, "ioremap() failed\n"); - retval = -ENOMEM; - goto fail; - } - dev_dbg(&pdev->dev, "mapped base=0x%08x\n", (unsigned) otg_dev->base); - - /* Enable USB Port */ - dwc_write_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0xe00), 0); - - /* - * Attempt to ensure this device is really a DWC_otg Controller. - * Read and verify the SNPSID register contents. The value should be - * 0x45F42XXX, which corresponds to "OT2", as in "OTG version 2.XX". - */ - snpsid = dwc_read_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0x40)); - - if ((snpsid & 0xFFFFF000) != OTG_CORE_REV_2_00) { - dev_err(&pdev->dev, "Bad value for SNPSID: 0x%08x\n", snpsid); - retval = -EINVAL; - goto fail; - } - - DWC_PRINT("Core Release: %x.%x%x%x\n", - (snpsid >> 12 & 0xF), - (snpsid >> 8 & 0xF), - (snpsid >> 4 & 0xF), - (snpsid & 0xF)); - - /* - * Initialize driver data to point to the global DWC_otg - * Device structure. - */ - platform_set_drvdata(pdev, otg_dev); - dev_dbg(&pdev->dev, "dwc_otg_device=0x%p\n", otg_dev); - - - otg_dev->core_if = dwc_otg_cil_init(otg_dev->base, - &dwc_otg_module_params); - - otg_dev->core_if->snpsid = snpsid; - - if (!otg_dev->core_if) { - dev_err(&pdev->dev, "CIL initialization failed!\n"); - retval = -ENOMEM; - goto fail; - } - - /* - * Validate parameter values. - */ - if (check_parameters(otg_dev->core_if)) { - retval = -EINVAL; - goto fail; - } - - /* - * Create Device Attributes in sysfs - */ - dwc_otg_attr_create(&pdev->dev); - - /* - * Disable the global interrupt until all the interrupt - * handlers are installed. - */ - dwc_otg_disable_global_interrupts(otg_dev->core_if); - - /* - * Install the interrupt handler for the common interrupts before - * enabling common interrupts in core_init below. - */ - DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n", - otg_dev->irq); - retval = request_irq(otg_dev->irq, dwc_otg_common_irq, - IRQF_SHARED, "dwc_otg", otg_dev); - if (retval) { - DWC_ERROR("request of irq%d failed\n", otg_dev->irq); - retval = -EBUSY; - goto fail; - } else { - otg_dev->common_irq_installed = 1; - } - - /* - * Initialize the DWC_otg core. - */ - dwc_otg_core_init(otg_dev->core_if); - -#ifndef DWC_HOST_ONLY - /* - * Initialize the PCD - */ - retval = dwc_otg_pcd_init(&pdev->dev); - if (retval != 0) { - DWC_ERROR("dwc_otg_pcd_init failed\n"); - otg_dev->pcd = NULL; - goto fail; - } -#endif -#ifndef DWC_DEVICE_ONLY - /* - * Initialize the HCD - */ - retval = dwc_otg_hcd_init(&pdev->dev); - if (retval != 0) { - DWC_ERROR("dwc_otg_hcd_init failed\n"); - otg_dev->hcd = NULL; - goto fail; - } -#endif - - /* - * Enable the global interrupt after all the interrupt - * handlers are installed. - */ - dwc_otg_enable_global_interrupts(otg_dev->core_if); - - return 0; - - fail: - dwc_otg_driver_remove(pdev); - return retval; -} - -/** - * This structure defines the methods to be called by a bus driver - * during the lifecycle of a device on that bus. Both drivers and - * devices are registered with a bus driver. The bus driver matches - * devices to drivers based on information in the device and driver - * structures. - * - * The probe function is called when the bus driver matches a device - * to this driver. The remove function is called when a device is - * unregistered with the bus driver. - */ -static struct platform_driver dwc_otg_driver = { - .driver = { - .name = (char *)dwc_driver_name, - }, - .probe = dwc_otg_driver_probe, - .remove = dwc_otg_driver_remove, -}; - -/** - * This function is called when the dwc_otg_driver is installed with the - * insmod command. It registers the dwc_otg_driver structure with the - * appropriate bus driver. This will cause the dwc_otg_driver_probe function - * to be called. In addition, the bus driver will automatically expose - * attributes defined for the device and driver in the special sysfs file - * system. - * - * @return - */ -static int __init dwc_otg_driver_init(void) -{ - int retval = 0; - int error; - - printk(KERN_INFO "%s: version %s\n", dwc_driver_name, DWC_DRIVER_VERSION); - - retval = platform_driver_register(&dwc_otg_driver); - if (retval) { - printk(KERN_ERR "%s retval=%d\n", __func__, retval); - return retval; - } - - error = driver_create_file(&dwc_otg_driver.driver, &driver_attr_version); - error = driver_create_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); - - return retval; -} -module_init(dwc_otg_driver_init); - -/** - * This function is called when the driver is removed from the kernel - * with the rmmod command. The driver unregisters itself with its bus - * driver. - * - */ -static void __exit dwc_otg_driver_cleanup(void) -{ - printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n"); - - driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); - driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version); - - platform_driver_unregister(&dwc_otg_driver); - - printk(KERN_INFO "%s module removed\n", dwc_driver_name); -} -module_exit(dwc_otg_driver_cleanup); - -MODULE_DESCRIPTION(DWC_DRIVER_DESC); -MODULE_AUTHOR("Synopsys Inc."); -MODULE_LICENSE("GPL"); - -module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444); -MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None"); -module_param_named(opt, dwc_otg_module_params.opt, int, 0444); -MODULE_PARM_DESC(opt, "OPT Mode"); -module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444); -MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled"); - -module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int, 0444); -MODULE_PARM_DESC(dma_desc_enable, "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled"); - -module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, 0444); -MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256"); -module_param_named(speed, dwc_otg_module_params.speed, int, 0444); -MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed"); -module_param_named(host_support_fs_ls_low_power, dwc_otg_module_params.host_support_fs_ls_low_power, int, 0444); -MODULE_PARM_DESC(host_support_fs_ls_low_power, "Support Low Power w/FS or LS 0=Support 1=Don't Support"); -module_param_named(host_ls_low_power_phy_clk, dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444); -MODULE_PARM_DESC(host_ls_low_power_phy_clk, "Low Speed Low Power Clock 0=48Mhz 1=6Mhz"); -module_param_named(enable_dynamic_fifo, dwc_otg_module_params.enable_dynamic_fifo, int, 0444); -MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing"); -module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, 0444); -MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768"); -module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, int, 0444); -MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); -module_param_named(dev_nperio_tx_fifo_size, dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444); -MODULE_PARM_DESC(dev_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768"); -module_param_named(dev_perio_tx_fifo_size_1, dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444); -MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, "Number of words in the periodic Tx FIFO 4-768"); -module_param_named(dev_perio_tx_fifo_size_2, dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444); -MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, "Number of words in the periodic Tx FIFO 4-768"); -module_param_named(dev_perio_tx_fifo_size_3, dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444); -MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, "Number of words in the periodic Tx FIFO 4-768"); -module_param_named(dev_perio_tx_fifo_size_4, dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444); -MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, "Number of words in the periodic Tx FIFO 4-768"); -module_param_named(dev_perio_tx_fifo_size_5, dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444); -MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, "Number of words in the periodic Tx FIFO 4-768"); -module_param_named(dev_perio_tx_fifo_size_6, dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444); -MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, "Number of words in the periodic Tx FIFO 4-768"); -module_param_named(dev_perio_tx_fifo_size_7, dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444); -MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, "Number of words in the periodic Tx FIFO 4-768"); -module_param_named(dev_perio_tx_fifo_size_8, dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444); -MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, "Number of words in the periodic Tx FIFO 4-768"); -module_param_named(dev_perio_tx_fifo_size_9, dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444); -MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, "Number of words in the periodic Tx FIFO 4-768"); -module_param_named(dev_perio_tx_fifo_size_10, dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444); -MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO 4-768"); -module_param_named(dev_perio_tx_fifo_size_11, dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444); -MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO 4-768"); -module_param_named(dev_perio_tx_fifo_size_12, dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444); -MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO 4-768"); -module_param_named(dev_perio_tx_fifo_size_13, dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444); -MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO 4-768"); -module_param_named(dev_perio_tx_fifo_size_14, dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444); -MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO 4-768"); -module_param_named(dev_perio_tx_fifo_size_15, dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444); -MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO 4-768"); -module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, int, 0444); -MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); -module_param_named(host_nperio_tx_fifo_size, dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444); -MODULE_PARM_DESC(host_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768"); -module_param_named(host_perio_tx_fifo_size, dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444); -MODULE_PARM_DESC(host_perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768"); -module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, int, 0444); -/** @todo Set the max to 512K, modify checks */ -MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535"); -module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, int, 0444); -MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511"); -module_param_named(host_channels, dwc_otg_module_params.host_channels, int, 0444); -MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16"); -module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, 0444); -MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15"); -module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444); -MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI"); -module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, 0444); -MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits"); -module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444); -MODULE_PARM_DESC(phy_ulpi_ddr, "ULPI at double or single data rate 0=Single 1=Double"); -module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, int, 0444); -MODULE_PARM_DESC(phy_ulpi_ext_vbus, "ULPI PHY using internal or external vbus 0=Internal"); -module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444); -MODULE_PARM_DESC(i2c_enable, "FS PHY Interface"); -module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444); -MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only"); -module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444); -MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs"); -module_param_named(debug, g_dbg_lvl, int, 0444); -MODULE_PARM_DESC(debug, ""); - -module_param_named(en_multiple_tx_fifo, dwc_otg_module_params.en_multiple_tx_fifo, int, 0444); -MODULE_PARM_DESC(en_multiple_tx_fifo, "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled"); -module_param_named(dev_tx_fifo_size_1, dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444); -MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768"); -module_param_named(dev_tx_fifo_size_2, dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444); -MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768"); -module_param_named(dev_tx_fifo_size_3, dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444); -MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768"); -module_param_named(dev_tx_fifo_size_4, dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444); -MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768"); -module_param_named(dev_tx_fifo_size_5, dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444); -MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768"); -module_param_named(dev_tx_fifo_size_6, dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444); -MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768"); -module_param_named(dev_tx_fifo_size_7, dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444); -MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768"); -module_param_named(dev_tx_fifo_size_8, dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444); -MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768"); -module_param_named(dev_tx_fifo_size_9, dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444); -MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768"); -module_param_named(dev_tx_fifo_size_10, dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444); -MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768"); -module_param_named(dev_tx_fifo_size_11, dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444); -MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768"); -module_param_named(dev_tx_fifo_size_12, dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444); -MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768"); -module_param_named(dev_tx_fifo_size_13, dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444); -MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768"); -module_param_named(dev_tx_fifo_size_14, dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444); -MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768"); -module_param_named(dev_tx_fifo_size_15, dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444); -MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768"); - -module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444); -MODULE_PARM_DESC(thr_ctl, "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled"); -module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, 0444); -MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs"); -module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, 0444); -MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs"); - -module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444); -MODULE_PARM_DESC(pti_enable, "Per Transfer Interrupt mode 0=disabled 1=enabled"); - -module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444); -MODULE_PARM_DESC(mpi_enable, "Multiprocessor Interrupt mode 0=disabled 1=enabled"); - -/** @page "Module Parameters" - * - * The following parameters may be specified when starting the module. - * These parameters define how the DWC_otg controller should be - * configured. Parameter values are passed to the CIL initialization - * function dwc_otg_cil_init - * - * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code> - * - - <table> - <tr><td>Parameter Name</td><td>Meaning</td></tr> - - <tr> - <td>otg_cap</td> - <td>Specifies the OTG capabilities. The driver will automatically detect the - value for this parameter if none is specified. - - 0: HNP and SRP capable (default, if available) - - 1: SRP Only capable - - 2: No HNP/SRP capable - </td></tr> - - <tr> - <td>dma_enable</td> - <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs. - The driver will automatically detect the value for this parameter if none is - specified. - - 0: Slave - - 1: DMA (default, if available) - </td></tr> - - <tr> - <td>dma_burst_size</td> - <td>The DMA Burst size (applicable only for External DMA Mode). - - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32) - </td></tr> - - <tr> - <td>speed</td> - <td>Specifies the maximum speed of operation in host and device mode. The - actual speed depends on the speed of the attached device and the value of - phy_type. - - 0: High Speed (default) - - 1: Full Speed - </td></tr> - - <tr> - <td>host_support_fs_ls_low_power</td> - <td>Specifies whether low power mode is supported when attached to a Full - Speed or Low Speed device in host mode. - - 0: Don't support low power mode (default) - - 1: Support low power mode - </td></tr> - - <tr> - <td>host_ls_low_power_phy_clk</td> - <td>Specifies the PHY clock rate in low power mode when connected to a Low - Speed device in host mode. This parameter is applicable only if - HOST_SUPPORT_FS_LS_LOW_POWER is enabled. - - 0: 48 MHz (default) - - 1: 6 MHz - </td></tr> - - <tr> - <td>enable_dynamic_fifo</td> - <td> Specifies whether FIFOs may be resized by the driver software. - - 0: Use cC FIFO size parameters - - 1: Allow dynamic FIFO sizing (default) - </td></tr> - - <tr> - <td>data_fifo_size</td> - <td>Total number of 4-byte words in the data FIFO memory. This memory - includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs. - - Values: 32 to 32768 (default 8192) - - Note: The total FIFO memory depth in the FPGA configuration is 8192. - </td></tr> - - <tr> - <td>dev_rx_fifo_size</td> - <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic - FIFO sizing is enabled. - - Values: 16 to 32768 (default 1064) - </td></tr> - - <tr> - <td>dev_nperio_tx_fifo_size</td> - <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when - dynamic FIFO sizing is enabled. - - Values: 16 to 32768 (default 1024) - </td></tr> - - <tr> - <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td> - <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode - when dynamic FIFO sizing is enabled. - - Values: 4 to 768 (default 256) - </td></tr> - - <tr> - <td>host_rx_fifo_size</td> - <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO - sizing is enabled. - - Values: 16 to 32768 (default 1024) - </td></tr> - - <tr> - <td>host_nperio_tx_fifo_size</td> - <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when - dynamic FIFO sizing is enabled in the core. - - Values: 16 to 32768 (default 1024) - </td></tr> - - <tr> - <td>host_perio_tx_fifo_size</td> - <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO - sizing is enabled. - - Values: 16 to 32768 (default 1024) - </td></tr> - - <tr> - <td>max_transfer_size</td> - <td>The maximum transfer size supported in bytes. - - Values: 2047 to 65,535 (default 65,535) - </td></tr> - - <tr> - <td>max_packet_count</td> - <td>The maximum number of packets in a transfer. - - Values: 15 to 511 (default 511) - </td></tr> - - <tr> - <td>host_channels</td> - <td>The number of host channel registers to use. - - Values: 1 to 16 (default 12) - - Note: The FPGA configuration supports a maximum of 12 host channels. - </td></tr> - - <tr> - <td>dev_endpoints</td> - <td>The number of endpoints in addition to EP0 available for device mode - operations. - - Values: 1 to 15 (default 6 IN and OUT) - - Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in - addition to EP0. - </td></tr> - - <tr> - <td>phy_type</td> - <td>Specifies the type of PHY interface to use. By default, the driver will - automatically detect the phy_type. - - 0: Full Speed - - 1: UTMI+ (default, if available) - - 2: ULPI - </td></tr> - - <tr> - <td>phy_utmi_width</td> - <td>Specifies the UTMI+ Data Width. This parameter is applicable for a - phy_type of UTMI+. Also, this parameter is applicable only if the - OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the - core has been configured to work at either data path width. - - Values: 8 or 16 bits (default 16) - </td></tr> - - <tr> - <td>phy_ulpi_ddr</td> - <td>Specifies whether the ULPI operates at double or single data rate. This - parameter is only applicable if phy_type is ULPI. - - 0: single data rate ULPI interface with 8 bit wide data bus (default) - - 1: double data rate ULPI interface with 4 bit wide data bus - </td></tr> - - <tr> - <td>i2c_enable</td> - <td>Specifies whether to use the I2C interface for full speed PHY. This - parameter is only applicable if PHY_TYPE is FS. - - 0: Disabled (default) - - 1: Enabled - </td></tr> - - <tr> - <td>otg_en_multiple_tx_fifo</td> - <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs. - The driver will automatically detect the value for this parameter if none is - specified. - - 0: Disabled - - 1: Enabled (default, if available) - </td></tr> - - <tr> - <td>dev_tx_fifo_size_n (n = 1 to 15)</td> - <td>Number of 4-byte words in each of the Tx FIFOs in device mode - when dynamic FIFO sizing is enabled. - - Values: 4 to 768 (default 256) - </td></tr> - -*/ |