diff options
Diffstat (limited to 'target/linux/ppc40x/patches-2.6.30/005-openrb.patch')
| -rw-r--r-- | target/linux/ppc40x/patches-2.6.30/005-openrb.patch | 412 |
1 files changed, 0 insertions, 412 deletions
diff --git a/target/linux/ppc40x/patches-2.6.30/005-openrb.patch b/target/linux/ppc40x/patches-2.6.30/005-openrb.patch deleted file mode 100644 index 43407c2025..0000000000 --- a/target/linux/ppc40x/patches-2.6.30/005-openrb.patch +++ /dev/null @@ -1,412 +0,0 @@ ---- /dev/null -+++ b/arch/powerpc/boot/cuboot-openrb.c -@@ -0,0 +1,71 @@ -+/* -+ * Old U-boot compatibility for OpenRB boards -+ * -+ * Author: Gabor Juhos <juhosg@openwrt.org> -+ * Imre Kaloz <kaloz@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include "ops.h" -+#include "io.h" -+#include "dcr.h" -+#include "stdio.h" -+#include "4xx.h" -+#include "44x.h" -+#include "cuboot.h" -+ -+#define TARGET_4xx -+#define TARGET_405EP -+#include "ppcboot.h" -+ -+static bd_t bd; -+ -+static void fixup_cf_card(void) -+{ -+#define DCRN_CPC0_PCI_BASE 0xf9 -+#define CF_CS0_BASE 0xff100000 -+#define CF_CS1_BASE 0xff200000 -+ -+ /* Turn on PerWE instead of PCIsomething */ -+ mtdcr(DCRN_CPC0_PCI_BASE, -+ mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27)); -+ -+ /* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */ -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B1CR); -+ mtdcr(DCRN_EBC0_CFGDATA, CF_CS0_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16); -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B1AP); -+ mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800); -+ -+ /* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */ -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B2CR); -+ mtdcr(DCRN_EBC0_CFGDATA, CF_CS1_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16); -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B2AP); -+ mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800); -+ -+#undef DCRN_CPC0_PCI_BASE -+#undef CF_CS0_BASE -+#undef CF_CS1_BASE -+} -+ -+static void openrb_fixups(void) -+{ -+ ibm405ep_fixup_clocks(bd.bi_procfreq / 8); -+ ibm4xx_sdram_fixup_memsize(); -+ -+ fixup_cf_card(); -+ -+ dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); -+} -+ -+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, -+ unsigned long r6, unsigned long r7) -+{ -+ CUBOOT_INIT(); -+ platform_ops.fixups = openrb_fixups; -+ platform_ops.exit = ibm40x_dbcr_reset; -+ fdt_init(_dtb_start); -+ serial_console_init(); -+} ---- /dev/null -+++ b/arch/powerpc/boot/dts/openrb.dts -@@ -0,0 +1,276 @@ -+/* -+ * Device Tree Source for OpenRB boards -+ * -+ * Copyright 2009 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright 2009 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * Based on walnut.dts -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without -+ * any warranty of any kind, whether express or implied. -+ */ -+ -+/dts-v1/; -+ -+/ { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ model = "openrb"; -+ compatible = "openrb"; -+ dcr-parent = <&{/cpus/cpu@0}>; -+ -+ aliases { -+ ethernet0 = &EMAC0; -+ ethernet1 = &EMAC1; -+ serial0 = &UART0; -+ serial1 = &UART1; -+ }; -+ -+ cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu@0 { -+ device_type = "cpu"; -+ model = "PowerPC,405EP"; -+ reg = <0x00000000>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ timebase-frequency = <0>; /* Filled in by zImage */ -+ i-cache-line-size = <0x20>; -+ d-cache-line-size = <0x20>; -+ i-cache-size = <0x4000>; -+ d-cache-size = <0x4000>; -+ dcr-controller; -+ dcr-access-method = "native"; -+ }; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */ -+ }; -+ -+ UIC0: interrupt-controller { -+ compatible = "ibm,uic"; -+ interrupt-controller; -+ cell-index = <0>; -+ dcr-reg = <0x0c0 0x009>; -+ #address-cells = <0>; -+ #size-cells = <0>; -+ #interrupt-cells = <2>; -+ }; -+ -+ plb { -+ compatible = "ibm,plb3"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ SDRAM0: memory-controller { -+ compatible = "ibm,sdram-405ep"; -+ dcr-reg = <0x010 0x002>; -+ }; -+ -+ MAL: mcmal { -+ compatible = "ibm,mcmal-405ep", "ibm,mcmal"; -+ dcr-reg = <0x180 0x062>; -+ num-tx-chans = <4>; -+ num-rx-chans = <2>; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0xb 0x4 /* TXEOB */ -+ 0xc 0x4 /* RXEOB */ -+ 0xa 0x4 /* SERR */ -+ 0xd 0x4 /* TXDE */ -+ 0xe 0x4 /* RXDE */>; -+ }; -+ -+ POB0: opb { -+ compatible = "ibm,opb-405ep", "ibm,opb"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0xef600000 0xef600000 0x00a00000>; -+ dcr-reg = <0x0a0 0x005>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ UART0: serial@ef600300 { -+ device_type = "serial"; -+ compatible = "ns16550"; -+ reg = <0xef600300 0x00000008>; -+ virtual-reg = <0xef600300>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ current-speed = <115200>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x0 0x4>; -+ }; -+ -+ UART1: serial@ef600400 { -+ device_type = "serial"; -+ compatible = "ns16550"; -+ reg = <0xef600400 0x00000008>; -+ virtual-reg = <0xef600400>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ current-speed = <115200>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x1 0x4>; -+ }; -+ -+ IIC: i2c@ef600500 { -+ compatible = "ibm,iic-405ep", "ibm,iic"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0xef600500 0x00000011>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x2 0x4>; -+ -+ eeprom@50 { -+ compatible = "at24,24c16"; -+ reg = <0x50>; -+ }; -+ }; -+ -+ GPIO0: gpio-controller@ef600700 { -+ compatible = "ibm,ppc4xx-gpio"; -+ reg = <0xef600700 0x00000020>; -+ #gpio-cells = <2>; -+ gpio-controller; -+ }; -+ -+ EMAC0: ethernet@ef600800 { -+ linux,network-index = <0x0>; -+ device_type = "network"; -+ compatible = "ibm,emac-405ep", "ibm,emac"; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0xf 0x4 /* Ethernet */ -+ 0x9 0x4 /* Ethernet Wake Up */>; -+ local-mac-address = [000000000000]; /* Filled in by zImage */ -+ reg = <0xef600800 0x00000070>; -+ mal-device = <&MAL>; -+ mal-tx-channel = <0>; -+ mal-rx-channel = <0>; -+ cell-index = <0>; -+ max-frame-size = <0x5dc>; -+ rx-fifo-size = <0x1000>; -+ tx-fifo-size = <0x800>; -+ phy-mode = "mii"; -+ phy-map = <0x00000000>; -+ }; -+ -+ EMAC1: ethernet@ef600900 { -+ linux,network-index = <0x1>; -+ device_type = "network"; -+ compatible = "ibm,emac-405ep", "ibm,emac"; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0x11 0x4 /* Ethernet */ -+ 0x09 0x4 /* Ethernet Wake Up */>; -+ local-mac-address = [000000000000]; /* Filled in by zImage */ -+ reg = <0xef600900 0x00000070>; -+ mal-device = <&MAL>; -+ mal-tx-channel = <2>; -+ mal-rx-channel = <1>; -+ cell-index = <1>; -+ max-frame-size = <0x5dc>; -+ rx-fifo-size = <0x1000>; -+ tx-fifo-size = <0x800>; -+ mdio-device = <&EMAC0>; -+ phy-mode = "mii"; -+ phy-map = <0x00000001>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ user { -+ label = "openrb:green:user"; -+ gpios = <&GPIO0 2 1>; -+ }; -+ }; -+ }; -+ -+ EBC0: ebc { -+ compatible = "ibm,ebc-405ep", "ibm,ebc"; -+ dcr-reg = <0x012 0x002>; -+ #address-cells = <2>; -+ #size-cells = <1>; -+ /* The ranges property is supplied by the bootwrapper -+ * and is based on the firmware's configuration of the -+ * EBC bridge -+ */ -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ cf_card@ff100000 { -+ compatible = "magicbox-cf", "pata-magicbox-cf"; -+ reg = <0x00000000 0xff100000 0x00001000 -+ 0x00000000 0xff200000 0x00001000>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x19 0x1 /* IRQ_TYPE_EDGE_RISING */ >; -+ }; -+ -+ nor_flash@ff800000 { -+ compatible = "cfi-flash"; -+ bank-width = <2>; -+ reg = <0x00000000 0xff800000 0x00800000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ partition@0 { -+ label = "linux"; -+ reg = <0x0 0x120000>; -+ }; -+ partition@120000 { -+ label = "rootfs"; -+ reg = <0x120000 0x6a0000>; -+ }; -+ partition@7c0000 { -+ label = "u-boot"; -+ reg = <0x7c0000 0x30000>; -+ read-only; -+ }; -+ }; -+ }; -+ -+ PCI0: pci@ec000000 { -+ device_type = "pci"; -+ #interrupt-cells = <1>; -+ #size-cells = <2>; -+ #address-cells = <3>; -+ compatible = "ibm,plb405ep-pci", "ibm,plb-pci"; -+ primary; -+ reg = <0xeec00000 0x00000008 /* Config space access */ -+ 0xeed80000 0x00000004 /* IACK */ -+ 0xeed80000 0x00000004 /* Special cycle */ -+ 0xef480000 0x00000040>; /* Internal registers */ -+ -+ /* Outbound ranges, one memory and one IO, -+ * later cannot be changed. Chip supports a second -+ * IO range but we don't use it for now -+ */ -+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 -+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; -+ -+ /* Inbound 2GB range starting at 0 */ -+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; -+ -+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>; -+ interrupt-map = < -+ /* IDSEL 1 */ -+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 -+ -+ /* IDSEL 2 */ -+ 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8 -+ -+ /* IDSEL 3 */ -+ 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8 -+ -+ /* IDSEL 4 */ -+ 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8 -+ >; -+ }; -+ }; -+ -+ chosen { -+ linux,stdout-path = "/plb/opb/serial@ef600300"; -+ }; -+}; ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -43,6 +43,7 @@ $(obj)/cuboot-taishan.o: BOOTCFLAGS += - - $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440 - $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 - $(obj)/cuboot-magicbox.o: BOOTCFLAGS += -mcpu=405 -+$(obj)/cuboot-openrb.o: BOOTCFLAGS += -mcpu=405 - $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 - $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405 - -@@ -76,7 +77,8 @@ src-plat := of.c cuboot-52xx.c cuboot-82 - cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ - cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ - virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ -- cuboot-acadia.c cuboot-amigaone.c cuboot-magicbox.c -+ cuboot-acadia.c cuboot-amigaone.c cuboot-magicbox.c \ -+ cuboot-openrb.c - src-boot := $(src-wlib) $(src-plat) empty.c - - src-boot := $(addprefix $(obj)/, $(src-boot)) -@@ -194,6 +196,7 @@ image-$(CONFIG_EP405) += dtbImage.ep40 - image-$(CONFIG_WALNUT) += treeImage.walnut - image-$(CONFIG_ACADIA) += cuImage.acadia - image-$(CONFIG_MAGICBOX) += cuImage.magicbox -+image-$(CONFIG_OPENRB) += cuImage.openrb - - # Board ports in arch/powerpc/platform/44x/Kconfig - image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony ---- a/arch/powerpc/platforms/40x/Kconfig -+++ b/arch/powerpc/platforms/40x/Kconfig -@@ -60,6 +60,16 @@ config MAGICBOX - help - This option enables support for the Magicbox boards. - -+config OPENRB -+ bool "OpenRB" -+ depends on 40x -+ default n -+ select PPC40x_SIMPLE -+ select 405EP -+ select PCI -+ help -+ This option enables support for the OpenRB boards. -+ - config MAKALU - bool "Makalu" - depends on 40x ---- a/arch/powerpc/platforms/40x/ppc40x_simple.c -+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c -@@ -55,7 +55,8 @@ static char *board[] __initdata = { - "amcc,haleakala", - "amcc,kilauea", - "amcc,makalu", -- "magicbox" -+ "magicbox", -+ "openrb" - }; - - static int __init ppc40x_probe(void) |