summaryrefslogtreecommitdiff
path: root/target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch')
-rw-r--r--target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch192
1 files changed, 84 insertions, 108 deletions
diff --git a/target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch b/target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch
index 9e7ea4b67e..d8c48b83b9 100644
--- a/target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch
+++ b/target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch
@@ -11,8 +11,8 @@
Index: linux-2.6.37/arch/arm/mach-omap1/board-nokia770.c
===================================================================
---- linux-2.6.37.orig/arch/arm/mach-omap1/board-nokia770.c 2011-01-27 14:17:04.376000007 +0100
-+++ linux-2.6.37/arch/arm/mach-omap1/board-nokia770.c 2011-01-27 14:17:29.131000007 +0100
+--- linux-2.6.37.orig/arch/arm/mach-omap1/board-nokia770.c 2011-01-05 01:50:19.000000000 +0100
++++ linux-2.6.37/arch/arm/mach-omap1/board-nokia770.c 2011-01-28 18:09:59.378233620 +0100
@@ -36,6 +36,7 @@
#include <plat/lcd_mipid.h>
#include <plat/mmc.h>
@@ -47,8 +47,8 @@ Index: linux-2.6.37/arch/arm/mach-omap1/board-nokia770.c
static void mipid_shutdown(struct mipid_platform_data *pdata)
Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c
===================================================================
---- linux-2.6.37.orig/arch/arm/mach-omap2/board-n8x0.c 2011-01-27 14:17:04.381000007 +0100
-+++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c 2011-01-27 14:17:29.132000007 +0100
+--- linux-2.6.37.orig/arch/arm/mach-omap2/board-n8x0.c 2011-01-05 01:50:19.000000000 +0100
++++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c 2011-01-28 18:13:25.864968462 +0100
@@ -18,9 +18,13 @@
#include <linux/io.h>
#include <linux/stddef.h>
@@ -72,7 +72,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c
#include "mux.h"
-@@ -40,109 +46,154 @@
+@@ -40,109 +46,162 @@
static int slot2_cover_open;
static struct device *mmc_device;
@@ -81,43 +81,14 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c
-#define TUSB6010_GPIO_INT 58
-#define TUSB6010_GPIO_ENABLE 0
-#define TUSB6010_DMACHAN 0x3f
--
--#if defined(CONFIG_USB_TUSB6010) || \
-- defined(CONFIG_USB_TUSB6010_MODULE)
--/*
-- * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
-- * 1.5 V voltage regulators of PM companion chip. Companion chip will then
-- * provide then PGOOD signal to TUSB6010 which will release it from reset.
-- */
--static int tusb_set_power(int state)
--{
-- int i, retval = 0;
--
-- if (state) {
-- gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
-- msleep(1);
--
-- /* Wait until TUSB6010 pulls INT pin down */
-- i = 100;
-- while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
-- msleep(1);
-- i--;
-- }
--
-- if (!i) {
-- printk(KERN_ERR "tusb: powerup failed\n");
-- retval = -ENODEV;
-- }
-- } else {
-- gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
-- msleep(10);
-- }
--
-- return retval;
+#define RX51_TSC2005_RESET_GPIO 94
+#define RX51_TSC2005_IRQ_GPIO 106
+#define OMAP_TAG_NOKIA_BT 0x4e01
+
++/* We map the FN key as LALT to workaround an X keycode problem.
++ * The XKB map needs to be adjusted to support this. */
++#define MAP_FN_AS_LEFTALT
++
+static s16 rx44_keymap[LM8323_KEYMAP_SIZE] = {
+ [0x01] = KEY_Q,
+ [0x02] = KEY_K,
@@ -149,10 +120,24 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c
+ [0x22] = KEY_SEMICOLON,
+ [0x23] = KEY_MINUS,
+ [0x24] = KEY_EQUAL,
++#ifdef MAP_FN_AS_LEFTALT
++ [0x2b] = KEY_LEFTALT,
++#else
+ [0x2b] = KEY_FN,
++#endif
+ [0x2c] = KEY_M,
+ [0x2f] = KEY_F8,
-+
+
+-#if defined(CONFIG_USB_TUSB6010) || \
+- defined(CONFIG_USB_TUSB6010_MODULE)
+-/*
+- * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
+- * 1.5 V voltage regulators of PM companion chip. Companion chip will then
+- * provide then PGOOD signal to TUSB6010 which will release it from reset.
+- */
+-static int tusb_set_power(int state)
+-{
+- int i, retval = 0;
+ [0x31] = KEY_R,
+ [0x32] = KEY_RIGHTCTRL,
+ [0x34] = KEY_SPACE,
@@ -217,16 +202,46 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c
+ n8x0_bt_device.dev.platform_data = (void *) bt_config;
+ if (platform_device_register(&n8x0_bt_device) < 0)
+ BUG();
- }
++}
+
+- if (state) {
+- gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
+- msleep(1);
++static struct omap2_mcspi_device_config mipid_mcspi_config = {
++ .turbo_mode = 0,
++ .single_channel = 1,
++};
+- /* Wait until TUSB6010 pulls INT pin down */
+- i = 100;
+- while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
+- msleep(1);
+- i--;
+- }
++static int slot1_cover_open;
++static int slot2_cover_open;
++static struct device *mmc_device;
+
+- if (!i) {
+- printk(KERN_ERR "tusb: powerup failed\n");
+- retval = -ENODEV;
+- }
+- } else {
+- gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
+- msleep(10);
+- }
+
+- return retval;
+-}
+-
-static struct musb_hdrc_config musb_config = {
- .multipoint = 1,
- .dyn_fifo = 1,
- .num_eps = 16,
- .ram_bits = 12,
-+static struct omap2_mcspi_device_config mipid_mcspi_config = {
++static struct omap2_mcspi_device_config p54spi_mcspi_config = {
+ .turbo_mode = 0,
-+ .single_channel = 1,
++ .single_channel = 1,
};
-static struct musb_hdrc_platform_data tusb_data = {
@@ -236,15 +251,20 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c
- .mode = MUSB_PERIPHERAL,
-#else /* defined(CONFIG_USB_MUSB_HOST) */
- .mode = MUSB_HOST,
--#endif
++#ifdef CONFIG_MACH_NOKIA_N8X0_LCD
++extern struct mipid_platform_data n8x0_mipid_platform_data;
+ #endif
- .set_power = tusb_set_power,
- .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */
- .power = 100, /* Max 100 mA VBUS for host mode */
- .config = &musb_config,
-};
--
+
-static void __init n8x0_usb_init(void)
--{
++#ifdef CONFIG_TOUCHSCREEN_TSC2005
++static struct tsc2005_platform_data tsc2005_config;
++static void rx51_tsc2005_set_reset(bool enable)
+ {
- int ret = 0;
- static char announce[] __initdata = KERN_INFO "TUSB 6010\n";
-
@@ -258,42 +278,28 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c
- gpio_direction_output(TUSB6010_GPIO_ENABLE, 0);
-
- tusb_set_power(0);
-+static int slot1_cover_open;
-+static int slot2_cover_open;
-+static struct device *mmc_device;
-
+-
- ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
- TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
- TUSB6010_GPIO_INT, TUSB6010_DMACHAN);
- if (ret != 0)
- goto err;
-
+-
- printk(announce);
-+static struct omap2_mcspi_device_config p54spi_mcspi_config = {
-+ .turbo_mode = 0,
-+ .single_channel = 1,
-+};
-
+-
- return;
-+#ifdef CONFIG_MACH_NOKIA_N8X0_LCD
-+extern struct mipid_platform_data n8x0_mipid_platform_data;
-+#endif
-
+-
-err:
- gpio_free(TUSB6010_GPIO_ENABLE);
-+#ifdef CONFIG_TOUCHSCREEN_TSC2005
-+static struct tsc2005_platform_data tsc2005_config;
-+static void rx51_tsc2005_set_reset(bool enable)
-+{
+ gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
}
-#else
-
-static void __init n8x0_usb_init(void) {}
-
--#endif /*CONFIG_USB_TUSB6010 */
-
+-#endif /*CONFIG_USB_TUSB6010 */
-
+
-static struct omap2_mcspi_device_config p54spi_mcspi_config = {
+static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
.turbo_mode = 0,
@@ -315,7 +321,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c
{
.modalias = "p54spi",
.bus_num = 2,
-@@ -150,8 +201,60 @@
+@@ -150,8 +209,60 @@
.max_speed_hz = 48000000,
.controller_data = &p54spi_mcspi_config,
},
@@ -376,7 +382,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-@@ -184,6 +287,20 @@
+@@ -184,6 +295,20 @@
},
};
@@ -397,7 +403,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c
static struct omap_onenand_platform_data board_onenand_data = {
.cs = 0,
.gpio_irq = 26,
-@@ -626,6 +743,11 @@
+@@ -626,6 +751,11 @@
static struct i2c_board_info n810_i2c_board_info_2[] __initdata = {
{
@@ -409,7 +415,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c
I2C_BOARD_INFO("tlv320aic3x", 0x18),
.platform_data = &n810_aic33_data,
},
-@@ -657,10 +779,62 @@
+@@ -657,10 +787,62 @@
#define board_mux NULL
#endif
@@ -472,7 +478,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c
spi_register_board_info(n800_spi_board_info,
ARRAY_SIZE(n800_spi_board_info));
omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
-@@ -671,6 +845,10 @@
+@@ -671,6 +853,10 @@
ARRAY_SIZE(n810_i2c_board_info_2));
omap_serial_init();
@@ -486,7 +492,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c
Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0-lcd.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0-lcd.c 2011-01-27 14:17:29.132000007 +0100
++++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0-lcd.c 2011-01-28 18:10:37.941647955 +0100
@@ -0,0 +1,127 @@
+/*
+ * linux/arch/arm/mach-omap2/board-n8x0.c
@@ -618,7 +624,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0-lcd.c
Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0-usb.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0-usb.c 2011-01-27 14:17:29.132000007 +0100
++++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0-usb.c 2011-01-28 18:09:59.378233620 +0100
@@ -0,0 +1,175 @@
+/*
+ * linux/arch/arm/mach-omap2/board-n8x0-usb.c
@@ -797,8 +803,8 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0-usb.c
+}
Index: linux-2.6.37/arch/arm/mach-omap2/control.c
===================================================================
---- linux-2.6.37.orig/arch/arm/mach-omap2/control.c 2011-01-27 14:17:04.403000007 +0100
-+++ linux-2.6.37/arch/arm/mach-omap2/control.c 2011-01-27 14:17:29.132000007 +0100
+--- linux-2.6.37.orig/arch/arm/mach-omap2/control.c 2011-01-05 01:50:19.000000000 +0100
++++ linux-2.6.37/arch/arm/mach-omap2/control.c 2011-01-28 18:09:59.378233620 +0100
@@ -172,6 +172,7 @@
return __raw_readw(OMAP_CTRL_REGADDR(offset));
}
@@ -817,8 +823,8 @@ Index: linux-2.6.37/arch/arm/mach-omap2/control.c
__raw_writel(val, OMAP_CTRL_REGADDR(offset));
Index: linux-2.6.37/arch/arm/mach-omap2/Kconfig
===================================================================
---- linux-2.6.37.orig/arch/arm/mach-omap2/Kconfig 2011-01-27 14:17:04.391000007 +0100
-+++ linux-2.6.37/arch/arm/mach-omap2/Kconfig 2011-01-27 14:17:29.132000007 +0100
+--- linux-2.6.37.orig/arch/arm/mach-omap2/Kconfig 2011-01-05 01:50:19.000000000 +0100
++++ linux-2.6.37/arch/arm/mach-omap2/Kconfig 2011-01-28 18:09:59.378233620 +0100
@@ -210,6 +210,16 @@
select MACH_NOKIA_N810
select MACH_NOKIA_N810_WIMAX
@@ -838,8 +844,8 @@ Index: linux-2.6.37/arch/arm/mach-omap2/Kconfig
depends on ARCH_OMAP3
Index: linux-2.6.37/arch/arm/mach-omap2/Makefile
===================================================================
---- linux-2.6.37.orig/arch/arm/mach-omap2/Makefile 2011-01-27 14:17:04.386000007 +0100
-+++ linux-2.6.37/arch/arm/mach-omap2/Makefile 2011-01-27 14:17:29.132000007 +0100
+--- linux-2.6.37.orig/arch/arm/mach-omap2/Makefile 2011-01-05 01:50:19.000000000 +0100
++++ linux-2.6.37/arch/arm/mach-omap2/Makefile 2011-01-28 18:09:59.378233620 +0100
@@ -139,6 +139,8 @@
hsmmc.o \
board-flash.o
@@ -849,33 +855,3 @@ Index: linux-2.6.37/arch/arm/mach-omap2/Makefile
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
board-rx51-sdram.o \
board-rx51-peripherals.o \
-Index: linux-2.6.37/arch/arm/mach-omap2/serial.c
-===================================================================
---- linux-2.6.37.orig/arch/arm/mach-omap2/serial.c 2011-01-27 14:17:04.398000007 +0100
-+++ linux-2.6.37/arch/arm/mach-omap2/serial.c 2011-01-27 14:17:29.132000007 +0100
-@@ -546,14 +546,17 @@
- uart->padconf = 0;
- }
-
-+#if 1
- uart->irqflags |= IRQF_SHARED;
- ret = request_threaded_irq(uart->irq, NULL, omap_uart_interrupt,
- IRQF_SHARED, "serial idle", (void *)uart);
- WARN_ON(ret);
-+#endif
- }
-
- void omap_uart_enable_irqs(int enable)
- {
-+#if 1
- int ret;
- struct omap_uart_state *uart;
-
-@@ -570,6 +573,7 @@
- free_irq(uart->irq, (void *)uart);
- }
- }
-+#endif
- }
-
- static ssize_t sleep_timeout_show(struct device *dev,