summaryrefslogtreecommitdiff
path: root/target/linux/olpc/patches/100-olpc.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/olpc/patches/100-olpc.patch')
-rw-r--r--target/linux/olpc/patches/100-olpc.patch12718
1 files changed, 3 insertions, 12715 deletions
diff --git a/target/linux/olpc/patches/100-olpc.patch b/target/linux/olpc/patches/100-olpc.patch
index a1ce5687e3..abbf61f808 100644
--- a/target/linux/olpc/patches/100-olpc.patch
+++ b/target/linux/olpc/patches/100-olpc.patch
@@ -1,21 +1,3 @@
-diff --git a/MAINTAINERS b/MAINTAINERS
-index 9c54a5e..f88d691 100644
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3026,6 +3026,13 @@ L: linux-wireless@vger.kernel.org
- W: http://prism54.org
- S: Maintained
-
-+ADM8211 WIRELESS DRIVER
-+P: Michael Wu
-+M: flamingice@sourmilk.net
-+L: netdev@vger.kernel.org
-+W: http://aluminum.sourmilk.net/adm8211/netdev/
-+S: Maintained
-+
- PROMISE DC4030 CACHING DISK CONTROLLER DRIVER
- P: Peter Denison
- M: promise@pnd-pc.demon.co.uk
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 97b64d7..92ceab7 100644
--- a/arch/i386/Kconfig
@@ -111,5508 +93,6 @@ index 97b64d7..92ceab7 100644
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
-diff --git a/arch/i386/boot/setup.S b/arch/i386/boot/setup.S
-new file mode 100644
-index 0000000..4cf6e23
---- /dev/null
-+++ b/arch/i386/boot/setup.S
-@@ -0,0 +1,1080 @@
-+/*
-+ * setup.S Copyright (C) 1991, 1992 Linus Torvalds
-+ *
-+ * setup.s is responsible for getting the system data from the BIOS,
-+ * and putting them into the appropriate places in system memory.
-+ * both setup.s and system has been loaded by the bootblock.
-+ *
-+ * This code asks the bios for memory/disk/other parameters, and
-+ * puts them in a "safe" place: 0x90000-0x901FF, ie where the
-+ * boot-block used to be. It is then up to the protected mode
-+ * system to read them from there before the area is overwritten
-+ * for buffer-blocks.
-+ *
-+ * Move PS/2 aux init code to psaux.c
-+ * (troyer@saifr00.cfsat.Honeywell.COM) 03Oct92
-+ *
-+ * some changes and additional features by Christoph Niemann,
-+ * March 1993/June 1994 (Christoph.Niemann@linux.org)
-+ *
-+ * add APM BIOS checking by Stephen Rothwell, May 1994
-+ * (sfr@canb.auug.org.au)
-+ *
-+ * High load stuff, initrd support and position independency
-+ * by Hans Lermen & Werner Almesberger, February 1996
-+ * <lermen@elserv.ffm.fgan.de>, <almesber@lrc.epfl.ch>
-+ *
-+ * Video handling moved to video.S by Martin Mares, March 1996
-+ * <mj@k332.feld.cvut.cz>
-+ *
-+ * Extended memory detection scheme retwiddled by orc@pell.chi.il.us (david
-+ * parsons) to avoid loadlin confusion, July 1997
-+ *
-+ * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999.
-+ * <stiker@northlink.com>
-+ *
-+ * Fix to work around buggy BIOSes which don't use carry bit correctly
-+ * and/or report extended memory in CX/DX for e801h memory size detection
-+ * call. As a result the kernel got wrong figures. The int15/e801h docs
-+ * from Ralf Brown interrupt list seem to indicate AX/BX should be used
-+ * anyway. So to avoid breaking many machines (presumably there was a reason
-+ * to orginally use CX/DX instead of AX/BX), we do a kludge to see
-+ * if CX/DX have been changed in the e801 call and if so use AX/BX .
-+ * Michael Miller, April 2001 <michaelm@mjmm.org>
-+ *
-+ * New A20 code ported from SYSLINUX by H. Peter Anvin. AMD Elan bugfixes
-+ * by Robert Schwebel, December 2001 <robert@schwebel.de>
-+ */
-+
-+#include <asm/segment.h>
-+#include <linux/utsrelease.h>
-+#include <linux/compile.h>
-+#include <asm/boot.h>
-+#include <asm/e820.h>
-+#include <asm/page.h>
-+#include <asm/setup.h>
-+
-+/* Signature words to ensure LILO loaded us right */
-+#define SIG1 0xAA55
-+#define SIG2 0x5A5A
-+
-+INITSEG = DEF_INITSEG # 0x9000, we move boot here, out of the way
-+SYSSEG = DEF_SYSSEG # 0x1000, system loaded at 0x10000 (65536).
-+SETUPSEG = DEF_SETUPSEG # 0x9020, this is the current segment
-+ # ... and the former contents of CS
-+
-+DELTA_INITSEG = SETUPSEG - INITSEG # 0x0020
-+
-+.code16
-+.globl begtext, begdata, begbss, endtext, enddata, endbss
-+
-+.text
-+begtext:
-+.data
-+begdata:
-+.bss
-+begbss:
-+.text
-+
-+start:
-+ jmp trampoline
-+
-+# This is the setup header, and it must start at %cs:2 (old 0x9020:2)
-+
-+ .ascii "HdrS" # header signature
-+ .word 0x0206 # header version number (>= 0x0105)
-+ # or else old loadlin-1.5 will fail)
-+realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
-+start_sys_seg: .word SYSSEG
-+ .word kernel_version # pointing to kernel version string
-+ # above section of header is compatible
-+ # with loadlin-1.5 (header v1.5). Don't
-+ # change it.
-+
-+type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin,
-+ # Bootlin, SYSLX, bootsect...)
-+ # See Documentation/i386/boot.txt for
-+ # assigned ids
-+
-+# flags, unused bits must be zero (RFU) bit within loadflags
-+loadflags:
-+LOADED_HIGH = 1 # If set, the kernel is loaded high
-+CAN_USE_HEAP = 0x80 # If set, the loader also has set
-+ # heap_end_ptr to tell how much
-+ # space behind setup.S can be used for
-+ # heap purposes.
-+ # Only the loader knows what is free
-+#ifndef __BIG_KERNEL__
-+ .byte 0
-+#else
-+ .byte LOADED_HIGH
-+#endif
-+
-+setup_move_size: .word 0x8000 # size to move, when setup is not
-+ # loaded at 0x90000. We will move setup
-+ # to 0x90000 then just before jumping
-+ # into the kernel. However, only the
-+ # loader knows how much data behind
-+ # us also needs to be loaded.
-+
-+code32_start: # here loaders can put a different
-+ # start address for 32-bit code.
-+#ifndef __BIG_KERNEL__
-+ .long 0x1000 # 0x1000 = default for zImage
-+#else
-+ .long 0x100000 # 0x100000 = default for big kernel
-+#endif
-+
-+ramdisk_image: .long 0 # address of loaded ramdisk image
-+ # Here the loader puts the 32-bit
-+ # address where it loaded the image.
-+ # This only will be read by the kernel.
-+
-+ramdisk_size: .long 0 # its size in bytes
-+
-+bootsect_kludge:
-+ .long 0 # obsolete
-+
-+heap_end_ptr: .word modelist+1024 # (Header version 0x0201 or later)
-+ # space from here (exclusive) down to
-+ # end of setup code can be used by setup
-+ # for local heap purposes.
-+
-+pad1: .word 0
-+cmd_line_ptr: .long 0 # (Header version 0x0202 or later)
-+ # If nonzero, a 32-bit pointer
-+ # to the kernel command line.
-+ # The command line should be
-+ # located between the start of
-+ # setup and the end of low
-+ # memory (0xa0000), or it may
-+ # get overwritten before it
-+ # gets read. If this field is
-+ # used, there is no longer
-+ # anything magical about the
-+ # 0x90000 segment; the setup
-+ # can be located anywhere in
-+ # low memory 0x10000 or higher.
-+
-+ramdisk_max: .long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff
-+ # (Header version 0x0203 or later)
-+ # The highest safe address for
-+ # the contents of an initrd
-+
-+kernel_alignment: .long CONFIG_PHYSICAL_ALIGN #physical addr alignment
-+ #required for protected mode
-+ #kernel
-+#ifdef CONFIG_RELOCATABLE
-+relocatable_kernel: .byte 1
-+#else
-+relocatable_kernel: .byte 0
-+#endif
-+pad2: .byte 0
-+pad3: .word 0
-+
-+cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line,
-+ #added with boot protocol
-+ #version 2.06
-+
-+trampoline: call start_of_setup
-+ .align 16
-+ # The offset at this point is 0x240
-+ .space (0xeff-0x240+1) # E820 & EDD space (ending at 0xeff)
-+# End of setup header #####################################################
-+
-+start_of_setup:
-+# Bootlin depends on this being done early
-+ movw $0x01500, %ax
-+ movb $0x81, %dl
-+ int $0x13
-+
-+#ifdef SAFE_RESET_DISK_CONTROLLER
-+# Reset the disk controller.
-+ movw $0x0000, %ax
-+ movb $0x80, %dl
-+ int $0x13
-+#endif
-+
-+# Set %ds = %cs, we know that SETUPSEG = %cs at this point
-+ movw %cs, %ax # aka SETUPSEG
-+ movw %ax, %ds
-+# Check signature at end of setup
-+ cmpw $SIG1, setup_sig1
-+ jne bad_sig
-+
-+ cmpw $SIG2, setup_sig2
-+ jne bad_sig
-+
-+ jmp good_sig1
-+
-+# Routine to print asciiz string at ds:si
-+prtstr:
-+ lodsb
-+ andb %al, %al
-+ jz fin
-+
-+ call prtchr
-+ jmp prtstr
-+
-+fin: ret
-+
-+# Space printing
-+prtsp2: call prtspc # Print double space
-+prtspc: movb $0x20, %al # Print single space (note: fall-thru)
-+
-+# Part of above routine, this one just prints ascii al
-+prtchr: pushw %ax
-+ pushw %cx
-+ movw $7,%bx
-+ movw $0x01, %cx
-+ movb $0x0e, %ah
-+ int $0x10
-+ popw %cx
-+ popw %ax
-+ ret
-+
-+beep: movb $0x07, %al
-+ jmp prtchr
-+
-+no_sig_mess: .string "No setup signature found ..."
-+
-+good_sig1:
-+ jmp good_sig
-+
-+# We now have to find the rest of the setup code/data
-+bad_sig:
-+ movw %cs, %ax # SETUPSEG
-+ subw $DELTA_INITSEG, %ax # INITSEG
-+ movw %ax, %ds
-+ xorb %bh, %bh
-+ movb (497), %bl # get setup sect from bootsect
-+ subw $4, %bx # LILO loads 4 sectors of setup
-+ shlw $8, %bx # convert to words (1sect=2^8 words)
-+ movw %bx, %cx
-+ shrw $3, %bx # convert to segment
-+ addw $SYSSEG, %bx
-+ movw %bx, %cs:start_sys_seg
-+# Move rest of setup code/data to here
-+ movw $2048, %di # four sectors loaded by LILO
-+ subw %si, %si
-+ pushw %cs
-+ popw %es
-+ movw $SYSSEG, %ax
-+ movw %ax, %ds
-+ rep
-+ movsw
-+ movw %cs, %ax # aka SETUPSEG
-+ movw %ax, %ds
-+ cmpw $SIG1, setup_sig1
-+ jne no_sig
-+
-+ cmpw $SIG2, setup_sig2
-+ jne no_sig
-+
-+ jmp good_sig
-+
-+no_sig:
-+ lea no_sig_mess, %si
-+ call prtstr
-+
-+no_sig_loop:
-+ hlt
-+ jmp no_sig_loop
-+
-+good_sig:
-+ movw %cs, %ax # aka SETUPSEG
-+ subw $DELTA_INITSEG, %ax # aka INITSEG
-+ movw %ax, %ds
-+# Check if an old loader tries to load a big-kernel
-+ testb $LOADED_HIGH, %cs:loadflags # Do we have a big kernel?
-+ jz loader_ok # No, no danger for old loaders.
-+
-+ cmpb $0, %cs:type_of_loader # Do we have a loader that
-+ # can deal with us?
-+ jnz loader_ok # Yes, continue.
-+
-+ pushw %cs # No, we have an old loader,
-+ popw %ds # die.
-+ lea loader_panic_mess, %si
-+ call prtstr
-+
-+ jmp no_sig_loop
-+
-+loader_panic_mess: .string "Wrong loader, giving up..."
-+
-+# check minimum cpuid
-+# we do this here because it is the last place we can actually
-+# show a user visible error message. Later the video modus
-+# might be already messed up.
-+loader_ok:
-+ call verify_cpu
-+ testl %eax,%eax
-+ jz cpu_ok
-+ movw %cs,%ax # aka SETUPSEG
-+ movw %ax,%ds
-+ lea cpu_panic_mess,%si
-+ call prtstr
-+1: jmp 1b
-+
-+cpu_panic_mess:
-+ .asciz "PANIC: CPU too old for this kernel."
-+
-+#include "../kernel/verify_cpu.S"
-+
-+cpu_ok:
-+# Get memory size (extended mem, kB)
-+
-+ xorl %eax, %eax
-+ movl %eax, (0x1e0)
-+#ifndef STANDARD_MEMORY_BIOS_CALL
-+ movb %al, (E820NR)
-+# Try three different memory detection schemes. First, try
-+# e820h, which lets us assemble a memory map, then try e801h,
-+# which returns a 32-bit memory size, and finally 88h, which
-+# returns 0-64m
-+
-+# method E820H:
-+# the memory map from hell. e820h returns memory classified into
-+# a whole bunch of different types, and allows memory holes and
-+# everything. We scan through this memory map and build a list
-+# of the first 32 memory areas, which we return at [E820MAP].
-+# This is documented at http://www.acpi.info/, in the ACPI 2.0 specification.
-+
-+#define SMAP 0x534d4150
-+
-+meme820:
-+ xorl %ebx, %ebx # continuation counter
-+ movw $E820MAP, %di # point into the whitelist
-+ # so we can have the bios
-+ # directly write into it.
-+
-+jmpe820:
-+ movl $0x0000e820, %eax # e820, upper word zeroed
-+ movl $SMAP, %edx # ascii 'SMAP'
-+ movl $20, %ecx # size of the e820rec
-+ pushw %ds # data record.
-+ popw %es
-+ int $0x15 # make the call
-+ jc bail820 # fall to e801 if it fails
-+
-+ cmpl $SMAP, %eax # check the return is `SMAP'
-+ jne bail820 # fall to e801 if it fails
-+
-+# cmpl $1, 16(%di) # is this usable memory?
-+# jne again820
-+
-+ # If this is usable memory, we save it by simply advancing %di by
-+ # sizeof(e820rec).
-+ #
-+good820:
-+ movb (E820NR), %al # up to 128 entries
-+ cmpb $E820MAX, %al
-+ jae bail820
-+
-+ incb (E820NR)
-+ movw %di, %ax
-+ addw $20, %ax
-+ movw %ax, %di
-+again820:
-+ cmpl $0, %ebx # check to see if
-+ jne jmpe820 # %ebx is set to EOF
-+bail820:
-+
-+
-+# method E801H:
-+# memory size is in 1k chunksizes, to avoid confusing loadlin.
-+# we store the 0xe801 memory size in a completely different place,
-+# because it will most likely be longer than 16 bits.
-+# (use 1e0 because that's what Larry Augustine uses in his
-+# alternative new memory detection scheme, and it's sensible
-+# to write everything into the same place.)
-+
-+meme801:
-+ stc # fix to work around buggy
-+ xorw %cx,%cx # BIOSes which don't clear/set
-+ xorw %dx,%dx # carry on pass/error of
-+ # e801h memory size call
-+ # or merely pass cx,dx though
-+ # without changing them.
-+ movw $0xe801, %ax
-+ int $0x15
-+ jc mem88
-+
-+ cmpw $0x0, %cx # Kludge to handle BIOSes
-+ jne e801usecxdx # which report their extended
-+ cmpw $0x0, %dx # memory in AX/BX rather than
-+ jne e801usecxdx # CX/DX. The spec I have read
-+ movw %ax, %cx # seems to indicate AX/BX
-+ movw %bx, %dx # are more reasonable anyway...
-+
-+e801usecxdx:
-+ andl $0xffff, %edx # clear sign extend
-+ shll $6, %edx # and go from 64k to 1k chunks
-+ movl %edx, (0x1e0) # store extended memory size
-+ andl $0xffff, %ecx # clear sign extend
-+ addl %ecx, (0x1e0) # and add lower memory into
-+ # total size.
-+
-+# Ye Olde Traditional Methode. Returns the memory size (up to 16mb or
-+# 64mb, depending on the bios) in ax.
-+mem88:
-+
-+#endif
-+ movb $0x88, %ah
-+ int $0x15
-+ movw %ax, (2)
-+
-+# Set the keyboard repeat rate to the max
-+ movw $0x0305, %ax
-+ xorw %bx, %bx
-+ int $0x16
-+
-+#ifndef CONFIG_VGA_NOPROBE
-+
-+# Check for video adapter and its parameters and allow the
-+# user to browse video modes.
-+ call video # NOTE: we need %ds pointing
-+ # to bootsector
-+#endif
-+
-+# Get hd0 data...
-+ xorw %ax, %ax
-+ movw %ax, %ds
-+ ldsw (4 * 0x41), %si
-+ movw %cs, %ax # aka SETUPSEG
-+ subw $DELTA_INITSEG, %ax # aka INITSEG
-+ pushw %ax
-+ movw %ax, %es
-+ movw $0x0080, %di
-+ movw $0x10, %cx
-+ pushw %cx
-+ cld
-+ rep
-+ movsb
-+# Get hd1 data...
-+ xorw %ax, %ax
-+ movw %ax, %ds
-+ ldsw (4 * 0x46), %si
-+ popw %cx
-+ popw %es
-+ movw $0x0090, %di
-+ rep
-+ movsb
-+# Check that there IS a hd1 :-)
-+ movw $0x01500, %ax
-+ movb $0x81, %dl
-+ int $0x13
-+ jc no_disk1
-+
-+ cmpb $3, %ah
-+ je is_disk1
-+
-+no_disk1:
-+ movw %cs, %ax # aka SETUPSEG
-+ subw $DELTA_INITSEG, %ax # aka INITSEG
-+ movw %ax, %es
-+ movw $0x0090, %di
-+ movw $0x10, %cx
-+ xorw %ax, %ax
-+ cld
-+ rep
-+ stosb
-+is_disk1:
-+# check for Micro Channel (MCA) bus
-+ movw %cs, %ax # aka SETUPSEG
-+ subw $DELTA_INITSEG, %ax # aka INITSEG
-+ movw %ax, %ds
-+ xorw %ax, %ax
-+ movw %ax, (0xa0) # set table length to 0
-+ movb $0xc0, %ah
-+ stc
-+ int $0x15 # moves feature table to es:bx
-+ jc no_mca
-+
-+ pushw %ds
-+ movw %es, %ax
-+ movw %ax, %ds
-+ movw %cs, %ax # aka SETUPSEG
-+ subw $DELTA_INITSEG, %ax # aka INITSEG
-+ movw %ax, %es
-+ movw %bx, %si
-+ movw $0xa0, %di
-+ movw (%si), %cx
-+ addw $2, %cx # table length is a short
-+ cmpw $0x10, %cx
-+ jc sysdesc_ok
-+
-+ movw $0x10, %cx # we keep only first 16 bytes
-+sysdesc_ok:
-+ rep
-+ movsb
-+ popw %ds
-+no_mca:
-+#ifdef CONFIG_X86_VOYAGER
-+ movb $0xff, 0x40 # flag on config found
-+ movb $0xc0, %al
-+ mov $0xff, %ah
-+ int $0x15 # put voyager config info at es:di
-+ jc no_voyager
-+ movw $0x40, %si # place voyager info in apm table
-+ cld
-+ movw $7, %cx
-+voyager_rep:
-+ movb %es:(%di), %al
-+ movb %al,(%si)
-+ incw %di
-+ incw %si
-+ decw %cx
-+ jnz voyager_rep
-+no_voyager:
-+#endif
-+# Check for PS/2 pointing device
-+ movw %cs, %ax # aka SETUPSEG
-+ subw $DELTA_INITSEG, %ax # aka INITSEG
-+ movw %ax, %ds
-+ movb $0, (0x1ff) # default is no pointing device
-+ int $0x11 # int 0x11: equipment list
-+ testb $0x04, %al # check if mouse installed
-+ jz no_psmouse
-+
-+ movb $0xAA, (0x1ff) # device present
-+no_psmouse:
-+
-+#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
-+ movl $0x0000E980, %eax # IST Support
-+ movl $0x47534943, %edx # Request value
-+ int $0x15
-+
-+ movl %eax, (96)
-+ movl %ebx, (100)
-+ movl %ecx, (104)
-+ movl %edx, (108)
-+#endif
-+
-+#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
-+# Then check for an APM BIOS...
-+ # %ds points to the bootsector
-+ movw $0, 0x40 # version = 0 means no APM BIOS
-+ movw $0x05300, %ax # APM BIOS installation check
-+ xorw %bx, %bx
-+ int $0x15
-+ jc done_apm_bios # Nope, no APM BIOS
-+
-+ cmpw $0x0504d, %bx # Check for "PM" signature
-+ jne done_apm_bios # No signature, no APM BIOS
-+
-+ andw $0x02, %cx # Is 32 bit supported?
-+ je done_apm_bios # No 32-bit, no (good) APM BIOS
-+
-+ movw $0x05304, %ax # Disconnect first just in case
-+ xorw %bx, %bx
-+ int $0x15 # ignore return code
-+ movw $0x05303, %ax # 32 bit connect
-+ xorl %ebx, %ebx
-+ xorw %cx, %cx # paranoia :-)
-+ xorw %dx, %dx # ...
-+ xorl %esi, %esi # ...
-+ xorw %di, %di # ...
-+ int $0x15
-+ jc no_32_apm_bios # Ack, error.
-+
-+ movw %ax, (66) # BIOS code segment
-+ movl %ebx, (68) # BIOS entry point offset
-+ movw %cx, (72) # BIOS 16 bit code segment
-+ movw %dx, (74) # BIOS data segment
-+ movl %esi, (78) # BIOS code segment lengths
-+ movw %di, (82) # BIOS data segment length
-+# Redo the installation check as the 32 bit connect
-+# modifies the flags returned on some BIOSs
-+ movw $0x05300, %ax # APM BIOS installation check
-+ xorw %bx, %bx
-+ xorw %cx, %cx # paranoia
-+ int $0x15
-+ jc apm_disconnect # error -> shouldn't happen
-+
-+ cmpw $0x0504d, %bx # check for "PM" signature
-+ jne apm_disconnect # no sig -> shouldn't happen
-+
-+ movw %ax, (64) # record the APM BIOS version
-+ movw %cx, (76) # and flags
-+ jmp done_apm_bios
-+
-+apm_disconnect: # Tidy up
-+ movw $0x05304, %ax # Disconnect
-+ xorw %bx, %bx
-+ int $0x15 # ignore return code
-+
-+ jmp done_apm_bios
-+
-+no_32_apm_bios:
-+ andw $0xfffd, (76) # remove 32 bit support bit
-+done_apm_bios:
-+#endif
-+
-+#include "edd.S"
-+
-+# Now we want to move to protected mode ...
-+ cmpw $0, %cs:realmode_swtch
-+ jz rmodeswtch_normal
-+
-+ lcall *%cs:realmode_swtch
-+
-+ jmp rmodeswtch_end
-+
-+rmodeswtch_normal:
-+ pushw %cs
-+ call default_switch
-+
-+rmodeswtch_end:
-+# Now we move the system to its rightful place ... but we check if we have a
-+# big-kernel. In that case we *must* not move it ...
-+ testb $LOADED_HIGH, %cs:loadflags
-+ jz do_move0 # .. then we have a normal low
-+ # loaded zImage
-+ # .. or else we have a high
-+ # loaded bzImage
-+ jmp end_move # ... and we skip moving
-+
-+do_move0:
-+ movw $0x100, %ax # start of destination segment
-+ movw %cs, %bp # aka SETUPSEG
-+ subw $DELTA_INITSEG, %bp # aka INITSEG
-+ movw %cs:start_sys_seg, %bx # start of source segment
-+ cld
-+do_move:
-+ movw %ax, %es # destination segment
-+ incb %ah # instead of add ax,#0x100
-+ movw %bx, %ds # source segment
-+ addw $0x100, %bx
-+ subw %di, %di
-+ subw %si, %si
-+ movw $0x800, %cx
-+ rep
-+ movsw
-+ cmpw %bp, %bx # assume start_sys_seg > 0x200,
-+ # so we will perhaps read one
-+ # page more than needed, but
-+ # never overwrite INITSEG
-+ # because destination is a
-+ # minimum one page below source
-+ jb do_move
-+
-+end_move:
-+# then we load the segment descriptors
-+ movw %cs, %ax # aka SETUPSEG
-+ movw %ax, %ds
-+
-+# Check whether we need to be downward compatible with version <=201
-+ cmpl $0, cmd_line_ptr
-+ jne end_move_self # loader uses version >=202 features
-+ cmpb $0x20, type_of_loader
-+ je end_move_self # bootsect loader, we know of it
-+
-+# Boot loader doesnt support boot protocol version 2.02.
-+# If we have our code not at 0x90000, we need to move it there now.
-+# We also then need to move the params behind it (commandline)
-+# Because we would overwrite the code on the current IP, we move
-+# it in two steps, jumping high after the first one.
-+ movw %cs, %ax
-+ cmpw $SETUPSEG, %ax
-+ je end_move_self
-+
-+ cli # make sure we really have
-+ # interrupts disabled !
-+ # because after this the stack
-+ # should not be used
-+ subw $DELTA_INITSEG, %ax # aka INITSEG
-+ movw %ss, %dx
-+ cmpw %ax, %dx
-+ jb move_self_1
-+
-+ addw $INITSEG, %dx
-+ subw %ax, %dx # this will go into %ss after
-+ # the move
-+move_self_1:
-+ movw %ax, %ds
-+ movw $INITSEG, %ax # real INITSEG
-+ movw %ax, %es
-+ movw %cs:setup_move_size, %cx
-+ std # we have to move up, so we use
-+ # direction down because the
-+ # areas may overlap
-+ movw %cx, %di
-+ decw %di
-+ movw %di, %si
-+ subw $move_self_here+0x200, %cx
-+ rep
-+ movsb
-+ ljmp $SETUPSEG, $move_self_here
-+
-+move_self_here:
-+ movw $move_self_here+0x200, %cx
-+ rep
-+ movsb
-+ movw $SETUPSEG, %ax
-+ movw %ax, %ds
-+ movw %dx, %ss
-+end_move_self: # now we are at the right place
-+
-+#
-+# Enable A20. This is at the very best an annoying procedure.
-+# A20 code ported from SYSLINUX 1.52-1.63 by H. Peter Anvin.
-+# AMD Elan bug fix by Robert Schwebel.
-+#
-+
-+#if defined(CONFIG_X86_ELAN)
-+ movb $0x02, %al # alternate A20 gate
-+ outb %al, $0x92 # this works on SC410/SC520
-+a20_elan_wait:
-+ call a20_test
-+ jz a20_elan_wait
-+ jmp a20_done
-+#endif
-+
-+
-+A20_TEST_LOOPS = 32 # Iterations per wait
-+A20_ENABLE_LOOPS = 255 # Total loops to try
-+
-+
-+#ifndef CONFIG_X86_VOYAGER
-+a20_try_loop:
-+
-+ # First, see if we are on a system with no A20 gate.
-+a20_none:
-+ call a20_test
-+ jnz a20_done
-+
-+ # Next, try the BIOS (INT 0x15, AX=0x2401)
-+a20_bios:
-+ movw $0x2401, %ax
-+ pushfl # Be paranoid about flags
-+ int $0x15
-+ popfl
-+
-+ call a20_test
-+ jnz a20_done
-+
-+ # Try enabling A20 through the keyboard controller
-+#endif /* CONFIG_X86_VOYAGER */
-+a20_kbc:
-+ call empty_8042
-+
-+#ifndef CONFIG_X86_VOYAGER
-+ call a20_test # Just in case the BIOS worked
-+ jnz a20_done # but had a delayed reaction.
-+#endif
-+
-+ movb $0xD1, %al # command write
-+ outb %al, $0x64
-+ call empty_8042
-+
-+ movb $0xDF, %al # A20 on
-+ outb %al, $0x60
-+ call empty_8042
-+
-+#ifndef CONFIG_X86_VOYAGER
-+ # Wait until a20 really *is* enabled; it can take a fair amount of
-+ # time on certain systems; Toshiba Tecras are known to have this
-+ # problem.
-+a20_kbc_wait:
-+ xorw %cx, %cx
-+a20_kbc_wait_loop:
-+ call a20_test
-+ jnz a20_done
-+ loop a20_kbc_wait_loop
-+
-+ # Final attempt: use "configuration port A"
-+a20_fast:
-+ inb $0x92, %al # Configuration Port A
-+ orb $0x02, %al # "fast A20" version
-+ andb $0xFE, %al # don't accidentally reset
-+ outb %al, $0x92
-+
-+ # Wait for configuration port A to take effect
-+a20_fast_wait:
-+ xorw %cx, %cx
-+a20_fast_wait_loop:
-+ call a20_test
-+ jnz a20_done
-+ loop a20_fast_wait_loop
-+
-+ # A20 is still not responding. Try frobbing it again.
-+ #
-+ decb (a20_tries)
-+ jnz a20_try_loop
-+
-+ movw $a20_err_msg, %si
-+ call prtstr
-+
-+a20_die:
-+ hlt
-+ jmp a20_die
-+
-+a20_tries:
-+ .byte A20_ENABLE_LOOPS
-+
-+a20_err_msg:
-+ .ascii "linux: fatal error: A20 gate not responding!"
-+ .byte 13, 10, 0
-+
-+ # If we get here, all is good
-+a20_done:
-+
-+#endif /* CONFIG_X86_VOYAGER */
-+# set up gdt and idt and 32bit start address
-+ lidt idt_48 # load idt with 0,0
-+ xorl %eax, %eax # Compute gdt_base
-+ movw %ds, %ax # (Convert %ds:gdt to a linear ptr)
-+ shll $4, %eax
-+ addl %eax, code32
-+ addl $gdt, %eax
-+ movl %eax, (gdt_48+2)
-+ lgdt gdt_48 # load gdt with whatever is
-+ # appropriate
-+
-+# make sure any possible coprocessor is properly reset..
-+ xorw %ax, %ax
-+ outb %al, $0xf0
-+ call delay
-+
-+ outb %al, $0xf1
-+ call delay
-+
-+# well, that went ok, I hope. Now we mask all interrupts - the rest
-+# is done in init_IRQ().
-+ movb $0xFF, %al # mask all interrupts for now
-+ outb %al, $0xA1
-+ call delay
-+
-+ movb $0xFB, %al # mask all irq's but irq2 which
-+ outb %al, $0x21 # is cascaded
-+
-+# Well, that certainly wasn't fun :-(. Hopefully it works, and we don't
-+# need no steenking BIOS anyway (except for the initial loading :-).
-+# The BIOS-routine wants lots of unnecessary data, and it's less
-+# "interesting" anyway. This is how REAL programmers do it.
-+#
-+# Well, now's the time to actually move into protected mode. To make
-+# things as simple as possible, we do no register set-up or anything,
-+# we let the gnu-compiled 32-bit programs do that. We just jump to
-+# absolute address 0x1000 (or the loader supplied one),
-+# in 32-bit protected mode.
-+#
-+# Note that the short jump isn't strictly needed, although there are
-+# reasons why it might be a good idea. It won't hurt in any case.
-+ movw $1, %ax # protected mode (PE) bit
-+ lmsw %ax # This is it!
-+ jmp flush_instr
-+
-+flush_instr:
-+ xorw %bx, %bx # Flag to indicate a boot
-+ xorl %esi, %esi # Pointer to real-mode code
-+ movw %cs, %si
-+ subw $DELTA_INITSEG, %si
-+ shll $4, %esi # Convert to 32-bit pointer
-+
-+# jump to startup_32 in arch/i386/boot/compressed/head.S
-+#
-+# NOTE: For high loaded big kernels we need a
-+# jmpi 0x100000,__BOOT_CS
-+#
-+# but we yet haven't reloaded the CS register, so the default size
-+# of the target offset still is 16 bit.
-+# However, using an operand prefix (0x66), the CPU will properly
-+# take our 48 bit far pointer. (INTeL 80386 Programmer's Reference
-+# Manual, Mixing 16-bit and 32-bit code, page 16-6)
-+
-+ .byte 0x66, 0xea # prefix + jmpi-opcode
-+code32: .long startup_32 # will be set to %cs+startup_32
-+ .word __BOOT_CS
-+.code32
-+startup_32:
-+ movl $(__BOOT_DS), %eax
-+ movl %eax, %ds
-+ movl %eax, %es
-+ movl %eax, %fs
-+ movl %eax, %gs
-+ movl %eax, %ss
-+
-+ xorl %eax, %eax
-+1: incl %eax # check that A20 really IS enabled
-+ movl %eax, 0x00000000 # loop forever if it isn't
-+ cmpl %eax, 0x00100000
-+ je 1b
-+
-+ # Jump to the 32bit entry point
-+ jmpl *(code32_start - start + (DELTA_INITSEG << 4))(%esi)
-+.code16
-+
-+# Here's a bunch of information about your current kernel..
-+kernel_version: .ascii UTS_RELEASE
-+ .ascii " ("
-+ .ascii LINUX_COMPILE_BY
-+ .ascii "@"
-+ .ascii LINUX_COMPILE_HOST
-+ .ascii ") "
-+ .ascii UTS_VERSION
-+ .byte 0
-+
-+# This is the default real mode switch routine.
-+# to be called just before protected mode transition
-+default_switch:
-+ cli # no interrupts allowed !
-+ movb $0x80, %al # disable NMI for bootup
-+ # sequence
-+ outb %al, $0x70
-+ lret
-+
-+
-+#ifndef CONFIG_X86_VOYAGER
-+# This routine tests whether or not A20 is enabled. If so, it
-+# exits with zf = 0.
-+#
-+# The memory address used, 0x200, is the int $0x80 vector, which
-+# should be safe.
-+
-+A20_TEST_ADDR = 4*0x80
-+
-+a20_test:
-+ pushw %cx
-+ pushw %ax
-+ xorw %cx, %cx
-+ movw %cx, %fs # Low memory
-+ decw %cx
-+ movw %cx, %gs # High memory area
-+ movw $A20_TEST_LOOPS, %cx
-+ movw %fs:(A20_TEST_ADDR), %ax
-+ pushw %ax
-+a20_test_wait:
-+ incw %ax
-+ movw %ax, %fs:(A20_TEST_ADDR)
-+ call delay # Serialize and make delay constant
-+ cmpw %gs:(A20_TEST_ADDR+0x10), %ax
-+ loope a20_test_wait
-+
-+ popw %fs:(A20_TEST_ADDR)
-+ popw %ax
-+ popw %cx
-+ ret
-+
-+#endif /* CONFIG_X86_VOYAGER */
-+
-+# This routine checks that the keyboard command queue is empty
-+# (after emptying the output buffers)
-+#
-+# Some machines have delusions that the keyboard buffer is always full
-+# with no keyboard attached...
-+#
-+# If there is no keyboard controller, we will usually get 0xff
-+# to all the reads. With each IO taking a microsecond and
-+# a timeout of 100,000 iterations, this can take about half a
-+# second ("delay" == outb to port 0x80). That should be ok,
-+# and should also be plenty of time for a real keyboard controller
-+# to empty.
-+#
-+
-+empty_8042:
-+ pushl %ecx
-+ movl $100000, %ecx
-+
-+empty_8042_loop:
-+ decl %ecx
-+ jz empty_8042_end_loop
-+
-+ call delay
-+
-+ inb $0x64, %al # 8042 status port
-+ testb $1, %al # output buffer?
-+ jz no_output
-+
-+ call delay
-+ inb $0x60, %al # read it
-+ jmp empty_8042_loop
-+
-+no_output:
-+ testb $2, %al # is input buffer full?
-+ jnz empty_8042_loop # yes - loop
-+empty_8042_end_loop:
-+ popl %ecx
-+ ret
-+
-+# Read the cmos clock. Return the seconds in al
-+gettime:
-+ pushw %cx
-+ movb $0x02, %ah
-+ int $0x1a
-+ movb %dh, %al # %dh contains the seconds
-+ andb $0x0f, %al
-+ movb %dh, %ah
-+ movb $0x04, %cl
-+ shrb %cl, %ah
-+ aad
-+ popw %cx
-+ ret
-+
-+# Delay is needed after doing I/O
-+delay:
-+ outb %al,$0x80
-+ ret
-+
-+# Descriptor tables
-+#
-+# NOTE: The intel manual says gdt should be sixteen bytes aligned for
-+# efficiency reasons. However, there are machines which are known not
-+# to boot with misaligned GDTs, so alter this at your peril! If you alter
-+# GDT_ENTRY_BOOT_CS (in asm/segment.h) remember to leave at least two
-+# empty GDT entries (one for NULL and one reserved).
-+#
-+# NOTE: On some CPUs, the GDT must be 8 byte aligned. This is
-+# true for the Voyager Quad CPU card which will not boot without
-+# This directive. 16 byte aligment is recommended by intel.
-+#
-+ .align 16
-+gdt:
-+ .fill GDT_ENTRY_BOOT_CS,8,0
-+
-+ .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
-+ .word 0 # base address = 0
-+ .word 0x9A00 # code read/exec
-+ .word 0x00CF # granularity = 4096, 386
-+ # (+5th nibble of limit)
-+
-+ .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
-+ .word 0 # base address = 0
-+ .word 0x9200 # data read/write
-+ .word 0x00CF # granularity = 4096, 386
-+ # (+5th nibble of limit)
-+gdt_end:
-+ .align 4
-+
-+ .word 0 # alignment byte
-+idt_48:
-+ .word 0 # idt limit = 0
-+ .word 0, 0 # idt base = 0L
-+
-+ .word 0 # alignment byte
-+gdt_48:
-+ .word gdt_end - gdt - 1 # gdt limit
-+ .word 0, 0 # gdt base (filled in later)
-+
-+#ifndef CONFIG_VGA_NOPROBE
-+# Include video setup & detection code
-+
-+#include "video.S"
-+#endif
-+
-+# Setup signature -- must be last
-+setup_sig1: .word SIG1
-+setup_sig2: .word SIG2
-+
-+# After this point, there is some free space which is used by the video mode
-+# handling code to store the temporary mode table (not used by the kernel).
-+
-+modelist:
-+
-+.text
-+endtext:
-+.data
-+enddata:
-+.bss
-+endbss:
-diff --git a/arch/i386/configs/olpc_defconfig b/arch/i386/configs/olpc_defconfig
-new file mode 100644
-index 0000000..f1675e8
---- /dev/null
-+++ b/arch/i386/configs/olpc_defconfig
-@@ -0,0 +1,2183 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.22-rc5
-+# Wed Jun 20 08:26:53 2007
-+#
-+CONFIG_X86_32=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_CLOCKSOURCE_WATCHDOG=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_SEMAPHORE_SLEEPERS=y
-+CONFIG_X86=y
-+CONFIG_MMU=y
-+CONFIG_ZONE_DMA=y
-+CONFIG_QUICKLIST=y
-+CONFIG_GENERIC_ISA_DMA=y
-+CONFIG_GENERIC_IOMAP=y
-+CONFIG_GENERIC_BUG=y
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-+CONFIG_DMI=y
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# Code maturity level options
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_LOCK_KERNEL=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+
-+#
-+# General setup
-+#
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+# CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+CONFIG_BSD_PROCESS_ACCT=y
-+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_UTS_NS is not set
-+CONFIG_AUDIT=y
-+CONFIG_AUDITSYSCALL=y
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=17
-+# CONFIG_SYSFS_DEPRECATED is not set
-+CONFIG_RELAY=y
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+CONFIG_UID16=y
-+# CONFIG_SYSCTL_SYSCALL is not set
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+CONFIG_KALLSYMS_EXTRA_PASS=y
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+# CONFIG_BASE_FULL is not set
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=1
-+
-+#
-+# Loadable module support
-+#
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+CONFIG_MODVERSIONS=y
-+CONFIG_MODULE_SRCVERSION_ALL=y
-+CONFIG_KMOD=y
-+
-+#
-+# Block layer
-+#
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+# CONFIG_IOSCHED_AS is not set
-+# CONFIG_IOSCHED_DEADLINE is not set
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+
-+#
-+# Processor type and features
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+# CONFIG_SMP is not set
-+CONFIG_X86_PC=y
-+# CONFIG_X86_ELAN is not set
-+# CONFIG_X86_VOYAGER is not set
-+# CONFIG_X86_NUMAQ is not set
-+# CONFIG_X86_SUMMIT is not set
-+# CONFIG_X86_BIGSMP is not set
-+# CONFIG_X86_VISWS is not set
-+# CONFIG_X86_GENERICARCH is not set
-+# CONFIG_X86_ES7000 is not set
-+# CONFIG_PARAVIRT is not set
-+# CONFIG_M386 is not set
-+# CONFIG_M486 is not set
-+# CONFIG_M586 is not set
-+# CONFIG_M586TSC is not set
-+# CONFIG_M586MMX is not set
-+# CONFIG_M686 is not set
-+# CONFIG_MPENTIUMII is not set
-+# CONFIG_MPENTIUMIII is not set
-+# CONFIG_MPENTIUMM is not set
-+# CONFIG_MCORE2 is not set
-+# CONFIG_MPENTIUM4 is not set
-+# CONFIG_MK6 is not set
-+# CONFIG_MK7 is not set
-+# CONFIG_MK8 is not set
-+# CONFIG_MCRUSOE is not set
-+# CONFIG_MEFFICEON is not set
-+# CONFIG_MWINCHIPC6 is not set
-+# CONFIG_MWINCHIP2 is not set
-+# CONFIG_MWINCHIP3D is not set
-+# CONFIG_MGEODEGX1 is not set
-+CONFIG_MGEODE_LX=y
-+# CONFIG_MCYRIXIII is not set
-+# CONFIG_MVIAC3_2 is not set
-+# CONFIG_MVIAC7 is not set
-+# CONFIG_X86_GENERIC is not set
-+CONFIG_X86_CMPXCHG=y
-+CONFIG_X86_L1_CACHE_SHIFT=5
-+CONFIG_X86_XADD=y
-+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_X86_WP_WORKS_OK=y
-+CONFIG_X86_INVLPG=y
-+CONFIG_X86_BSWAP=y
-+CONFIG_X86_POPAD_OK=y
-+CONFIG_X86_USE_PPRO_CHECKSUM=y
-+CONFIG_X86_USE_3DNOW=y
-+CONFIG_X86_TSC=y
-+CONFIG_X86_MINIMUM_CPU_MODEL=4
-+# CONFIG_HPET_TIMER is not set
-+# CONFIG_PREEMPT_NONE is not set
-+# CONFIG_PREEMPT_VOLUNTARY is not set
-+CONFIG_PREEMPT=y
-+CONFIG_PREEMPT_BKL=y
-+# CONFIG_X86_UP_APIC is not set
-+# CONFIG_X86_MCE is not set
-+# CONFIG_VM86 is not set
-+# CONFIG_TOSHIBA is not set
-+# CONFIG_I8K is not set
-+CONFIG_X86_REBOOTFIXUPS=y
-+# CONFIG_MICROCODE is not set
-+CONFIG_X86_MSR=y
-+CONFIG_X86_CPUID=m
-+
-+#
-+# Firmware Drivers
-+#
-+# CONFIG_EDD is not set
-+# CONFIG_DELL_RBU is not set
-+# CONFIG_DCDBAS is not set
-+CONFIG_NOHIGHMEM=y
-+# CONFIG_HIGHMEM4G is not set
-+# CONFIG_HIGHMEM64G is not set
-+CONFIG_VMSPLIT_3G=y
-+# CONFIG_VMSPLIT_3G_OPT is not set
-+# CONFIG_VMSPLIT_2G is not set
-+# CONFIG_VMSPLIT_2G_OPT is not set
-+# CONFIG_VMSPLIT_1G is not set
-+CONFIG_PAGE_OFFSET=0xC0000000
-+CONFIG_ARCH_FLATMEM_ENABLE=y
-+CONFIG_ARCH_SPARSEMEM_ENABLE=y
-+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-+CONFIG_ARCH_POPULATES_NODE_MAP=y
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+CONFIG_SPARSEMEM_STATIC=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_NR_QUICK=1
-+# CONFIG_MATH_EMULATION is not set
-+# CONFIG_MTRR is not set
-+# CONFIG_SECCOMP is not set
-+# CONFIG_VGA_NOPROBE is not set
-+CONFIG_HZ_100=y
-+# CONFIG_HZ_250 is not set
-+# CONFIG_HZ_300 is not set
-+# CONFIG_HZ_1000 is not set
-+CONFIG_HZ=100
-+CONFIG_KEXEC=y
-+CONFIG_PHYSICAL_START=0x400000
-+# CONFIG_RELOCATABLE is not set
-+CONFIG_PHYSICAL_ALIGN=0x100000
-+# CONFIG_COMPAT_VDSO is not set
-+
-+#
-+# Power management options (ACPI, APM)
-+#
-+CONFIG_PM=y
-+CONFIG_PM_LEGACY=y
-+CONFIG_PM_DEBUG=y
-+CONFIG_DISABLE_SUSPEND_VT_SWITCH=y
-+# CONFIG_PM_TRACE is not set
-+# CONFIG_PM_SYSFS_DEPRECATED is not set
-+CONFIG_SOFTWARE_SUSPEND=y
-+CONFIG_PM_STD_PARTITION=""
-+
-+#
-+# ACPI (Advanced Configuration and Power Interface) Support
-+#
-+# CONFIG_ACPI is not set
-+# CONFIG_APM is not set
-+
-+#
-+# CPU Frequency scaling
-+#
-+# CONFIG_CPU_FREQ is not set
-+
-+#
-+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-+#
-+CONFIG_PCI=y
-+# CONFIG_PCI_GOBIOS is not set
-+# CONFIG_PCI_GOMMCONFIG is not set
-+# CONFIG_PCI_GODIRECT is not set
-+# CONFIG_PCI_GOANY is not set
-+CONFIG_PCI_GOOLPC=y
-+CONFIG_PCI_DIRECT=y
-+CONFIG_PCI_OLPC=y
-+# CONFIG_PCIEPORTBUS is not set
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCI_DEBUG is not set
-+CONFIG_ISA_DMA_API=y
-+# CONFIG_ISA is not set
-+# CONFIG_MCA is not set
-+# CONFIG_SCx200 is not set
-+CONFIG_GEODE_MFGPT_TIMER=y
-+CONFIG_OLPC=y
-+CONFIG_OLPC_PM=y
-+CONFIG_OPEN_FIRMWARE=y
-+
-+#
-+# PCCARD (PCMCIA/CardBus) support
-+#
-+# CONFIG_PCCARD is not set
-+# CONFIG_HOTPLUG_PCI is not set
-+
-+#
-+# Executable file formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+CONFIG_BINFMT_MISC=y
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=y
-+# CONFIG_XFRM_SUB_POLICY is not set
-+CONFIG_XFRM_MIGRATE=y
-+CONFIG_NET_KEY=m
-+CONFIG_NET_KEY_MIGRATE=y
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_MULTIPLE_TABLES=y
-+CONFIG_IP_ROUTE_MULTIPATH=y
-+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-+CONFIG_IP_ROUTE_VERBOSE=y
-+# CONFIG_IP_PNP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_IP_MROUTE is not set
-+# CONFIG_ARPD is not set
-+CONFIG_SYN_COOKIES=y
-+CONFIG_INET_AH=m
-+CONFIG_INET_ESP=m
-+CONFIG_INET_IPCOMP=m
-+CONFIG_INET_XFRM_TUNNEL=m
-+CONFIG_INET_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+# CONFIG_INET_DIAG is not set
-+CONFIG_TCP_CONG_ADVANCED=y
-+CONFIG_TCP_CONG_BIC=y
-+CONFIG_TCP_CONG_CUBIC=m
-+CONFIG_TCP_CONG_WESTWOOD=m
-+CONFIG_TCP_CONG_HTCP=m
-+CONFIG_TCP_CONG_HSTCP=m
-+CONFIG_TCP_CONG_HYBLA=m
-+CONFIG_TCP_CONG_VEGAS=m
-+CONFIG_TCP_CONG_SCALABLE=m
-+CONFIG_TCP_CONG_LP=m
-+CONFIG_TCP_CONG_VENO=m
-+CONFIG_TCP_CONG_YEAH=m
-+CONFIG_TCP_CONG_ILLINOIS=m
-+CONFIG_DEFAULT_BIC=y
-+# CONFIG_DEFAULT_CUBIC is not set
-+# CONFIG_DEFAULT_HTCP is not set
-+# CONFIG_DEFAULT_VEGAS is not set
-+# CONFIG_DEFAULT_WESTWOOD is not set
-+# CONFIG_DEFAULT_RENO is not set
-+CONFIG_DEFAULT_TCP_CONG="bic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IP_VS is not set
-+CONFIG_IPV6=y
-+CONFIG_IPV6_PRIVACY=y
-+CONFIG_IPV6_ROUTER_PREF=y
-+CONFIG_IPV6_ROUTE_INFO=y
-+CONFIG_IPV6_OPTIMISTIC_DAD=y
-+CONFIG_INET6_AH=m
-+CONFIG_INET6_ESP=m
-+CONFIG_INET6_IPCOMP=m
-+CONFIG_IPV6_MIP6=y
-+CONFIG_INET6_XFRM_TUNNEL=m
-+CONFIG_INET6_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET6_XFRM_MODE_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_BEET=m
-+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-+CONFIG_IPV6_SIT=m
-+CONFIG_IPV6_TUNNEL=m
-+CONFIG_IPV6_MULTIPLE_TABLES=y
-+CONFIG_IPV6_SUBTREES=y
-+# CONFIG_NETLABEL is not set
-+CONFIG_NETWORK_SECMARK=y
-+CONFIG_NETFILTER=y
-+# CONFIG_NETFILTER_DEBUG is not set
-+
-+#
-+# Core Netfilter Configuration
-+#
-+CONFIG_NETFILTER_NETLINK=m
-+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-+# CONFIG_NETFILTER_NETLINK_LOG is not set
-+CONFIG_NF_CONNTRACK_ENABLED=m
-+CONFIG_NF_CONNTRACK=m
-+# CONFIG_NF_CT_ACCT is not set
-+# CONFIG_NF_CONNTRACK_MARK is not set
-+# CONFIG_NF_CONNTRACK_SECMARK is not set
-+# CONFIG_NF_CONNTRACK_EVENTS is not set
-+# CONFIG_NF_CT_PROTO_SCTP is not set
-+# CONFIG_NF_CONNTRACK_AMANDA is not set
-+CONFIG_NF_CONNTRACK_FTP=m
-+# CONFIG_NF_CONNTRACK_H323 is not set
-+CONFIG_NF_CONNTRACK_IRC=m
-+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-+# CONFIG_NF_CONNTRACK_PPTP is not set
-+# CONFIG_NF_CONNTRACK_SANE is not set
-+# CONFIG_NF_CONNTRACK_SIP is not set
-+# CONFIG_NF_CONNTRACK_TFTP is not set
-+# CONFIG_NF_CT_NETLINK is not set
-+CONFIG_NETFILTER_XTABLES=m
-+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-+# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
-+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-+CONFIG_NETFILTER_XT_MATCH_STATE=m
-+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-+
-+#
-+# IP: Netfilter Configuration
-+#
-+CONFIG_NF_CONNTRACK_IPV4=m
-+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-+# CONFIG_IP_NF_QUEUE is not set
-+CONFIG_IP_NF_IPTABLES=m
-+# CONFIG_IP_NF_MATCH_IPRANGE is not set
-+# CONFIG_IP_NF_MATCH_TOS is not set
-+# CONFIG_IP_NF_MATCH_RECENT is not set
-+# CONFIG_IP_NF_MATCH_ECN is not set
-+# CONFIG_IP_NF_MATCH_AH is not set
-+# CONFIG_IP_NF_MATCH_TTL is not set
-+# CONFIG_IP_NF_MATCH_OWNER is not set
-+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-+CONFIG_IP_NF_FILTER=m
-+# CONFIG_IP_NF_TARGET_REJECT is not set
-+CONFIG_IP_NF_TARGET_LOG=m
-+# CONFIG_IP_NF_TARGET_ULOG is not set
-+CONFIG_NF_NAT=m
-+CONFIG_NF_NAT_NEEDED=y
-+CONFIG_IP_NF_TARGET_MASQUERADE=m
-+# CONFIG_IP_NF_TARGET_REDIRECT is not set
-+# CONFIG_IP_NF_TARGET_NETMAP is not set
-+# CONFIG_IP_NF_TARGET_SAME is not set
-+# CONFIG_NF_NAT_SNMP_BASIC is not set
-+CONFIG_NF_NAT_FTP=m
-+CONFIG_NF_NAT_IRC=m
-+# CONFIG_NF_NAT_TFTP is not set
-+# CONFIG_NF_NAT_AMANDA is not set
-+# CONFIG_NF_NAT_PPTP is not set
-+# CONFIG_NF_NAT_H323 is not set
-+# CONFIG_NF_NAT_SIP is not set
-+# CONFIG_IP_NF_MANGLE is not set
-+# CONFIG_IP_NF_RAW is not set
-+# CONFIG_IP_NF_ARPTABLES is not set
-+
-+#
-+# IPv6: Netfilter Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_NF_CONNTRACK_IPV6 is not set
-+# CONFIG_IP6_NF_QUEUE is not set
-+# CONFIG_IP6_NF_IPTABLES is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+CONFIG_NET_SCHED=y
-+CONFIG_NET_SCH_FIFO=y
-+
-+#
-+# Queueing/Scheduling
-+#
-+CONFIG_NET_SCH_CBQ=m
-+CONFIG_NET_SCH_HTB=m
-+CONFIG_NET_SCH_HFSC=m
-+CONFIG_NET_SCH_PRIO=m
-+CONFIG_NET_SCH_RED=m
-+CONFIG_NET_SCH_SFQ=m
-+CONFIG_NET_SCH_TEQL=m
-+CONFIG_NET_SCH_TBF=m
-+CONFIG_NET_SCH_GRED=m
-+CONFIG_NET_SCH_DSMARK=m
-+CONFIG_NET_SCH_NETEM=m
-+CONFIG_NET_SCH_INGRESS=m
-+
-+#
-+# Classification
-+#
-+CONFIG_NET_CLS=y
-+CONFIG_NET_CLS_BASIC=m
-+CONFIG_NET_CLS_TCINDEX=m
-+CONFIG_NET_CLS_ROUTE4=m
-+CONFIG_NET_CLS_ROUTE=y
-+CONFIG_NET_CLS_FW=m
-+CONFIG_NET_CLS_U32=m
-+CONFIG_CLS_U32_PERF=y
-+CONFIG_CLS_U32_MARK=y
-+CONFIG_NET_CLS_RSVP=m
-+CONFIG_NET_CLS_RSVP6=m
-+CONFIG_NET_EMATCH=y
-+CONFIG_NET_EMATCH_STACK=32
-+CONFIG_NET_EMATCH_CMP=m
-+CONFIG_NET_EMATCH_NBYTE=m
-+CONFIG_NET_EMATCH_U32=m
-+CONFIG_NET_EMATCH_META=m
-+CONFIG_NET_EMATCH_TEXT=m
-+CONFIG_NET_CLS_ACT=y
-+CONFIG_NET_ACT_POLICE=m
-+CONFIG_NET_ACT_GACT=m
-+CONFIG_GACT_PROB=y
-+CONFIG_NET_ACT_MIRRED=m
-+# CONFIG_NET_ACT_IPT is not set
-+CONFIG_NET_ACT_PEDIT=m
-+CONFIG_NET_ACT_SIMP=m
-+CONFIG_NET_CLS_IND=y
-+CONFIG_NET_ESTIMATOR=y
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_NET_TCPPROBE is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+CONFIG_FIB_RULES=y
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+CONFIG_WIRELESS_EXT=y
-+# CONFIG_MAC80211 is not set
-+CONFIG_IEEE80211=m
-+# CONFIG_IEEE80211_DEBUG is not set
-+CONFIG_IEEE80211_CRYPT_WEP=m
-+CONFIG_IEEE80211_CRYPT_CCMP=m
-+CONFIG_IEEE80211_CRYPT_TKIP=m
-+CONFIG_IEEE80211_SOFTMAC=m
-+CONFIG_IEEE80211_SOFTMAC_DEBUG=y
-+# CONFIG_RFKILL is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+
-+#
-+# Connector - unified userspace <-> kernelspace linker
-+#
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+CONFIG_MTD_CONCAT=m
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+# CONFIG_MTD_CMDLINE_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=m
-+CONFIG_MTD_BLKDEVS=m
-+CONFIG_MTD_BLOCK=m
-+CONFIG_MTD_BLOCK_RO=m
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+# CONFIG_MTD_CFI is not set
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+# CONFIG_MTD_TS5500 is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_PMC551 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND=y
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+CONFIG_MTD_NAND_CAFE=y
-+# CONFIG_MTD_NAND_CS553X is not set
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+
-+#
-+# Parallel port support
-+#
-+# CONFIG_PARPORT is not set
-+
-+#
-+# Plug and Play support
-+#
-+# CONFIG_PNPACPI is not set
-+
-+#
-+# Block devices
-+#
-+# CONFIG_BLK_DEV_FD is not set
-+# CONFIG_BLK_CPQ_DA is not set
-+# CONFIG_BLK_CPQ_CISS_DA is not set
-+# CONFIG_BLK_DEV_DAC960 is not set
-+# CONFIG_BLK_DEV_UMEM is not set
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=m
-+CONFIG_BLK_DEV_CRYPTOLOOP=m
-+CONFIG_BLK_DEV_NBD=m
-+# CONFIG_BLK_DEV_SX8 is not set
-+CONFIG_BLK_DEV_UB=m
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=16384
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+
-+#
-+# Misc devices
-+#
-+# CONFIG_IBM_ASM is not set
-+# CONFIG_PHANTOM is not set
-+# CONFIG_SGI_IOC4 is not set
-+# CONFIG_TIFM_CORE is not set
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_IDE=m
-+CONFIG_IDE_MAX_HWIFS=4
-+CONFIG_BLK_DEV_IDE=m
-+
-+#
-+# Please see Documentation/ide.txt for help/info on IDE drives
-+#
-+# CONFIG_BLK_DEV_IDE_SATA is not set
-+# CONFIG_BLK_DEV_HD_IDE is not set
-+CONFIG_BLK_DEV_IDEDISK=m
-+CONFIG_IDEDISK_MULTI_MODE=y
-+# CONFIG_BLK_DEV_IDECD is not set
-+# CONFIG_BLK_DEV_IDETAPE is not set
-+# CONFIG_BLK_DEV_IDEFLOPPY is not set
-+# CONFIG_BLK_DEV_IDESCSI is not set
-+CONFIG_IDE_TASK_IOCTL=y
-+# CONFIG_IDE_PROC_FS is not set
-+
-+#
-+# IDE chipset support/bugfixes
-+#
-+CONFIG_IDE_GENERIC=m
-+# CONFIG_BLK_DEV_CMD640 is not set
-+CONFIG_BLK_DEV_IDEPCI=y
-+CONFIG_IDEPCI_SHARE_IRQ=y
-+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-+# CONFIG_BLK_DEV_OFFBOARD is not set
-+# CONFIG_BLK_DEV_GENERIC is not set
-+# CONFIG_BLK_DEV_OPTI621 is not set
-+# CONFIG_BLK_DEV_RZ1000 is not set
-+CONFIG_BLK_DEV_IDEDMA_PCI=y
-+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-+CONFIG_IDEDMA_ONLYDISK=y
-+# CONFIG_BLK_DEV_AEC62XX is not set
-+# CONFIG_BLK_DEV_ALI15X3 is not set
-+# CONFIG_BLK_DEV_AMD74XX is not set
-+# CONFIG_BLK_DEV_ATIIXP is not set
-+# CONFIG_BLK_DEV_CMD64X is not set
-+# CONFIG_BLK_DEV_TRIFLEX is not set
-+# CONFIG_BLK_DEV_CY82C693 is not set
-+# CONFIG_BLK_DEV_CS5520 is not set
-+# CONFIG_BLK_DEV_CS5530 is not set
-+# CONFIG_BLK_DEV_CS5535 is not set
-+# CONFIG_BLK_DEV_HPT34X is not set
-+# CONFIG_BLK_DEV_HPT366 is not set
-+# CONFIG_BLK_DEV_JMICRON is not set
-+# CONFIG_BLK_DEV_SC1200 is not set
-+CONFIG_BLK_DEV_PIIX=m
-+# CONFIG_BLK_DEV_IT8213 is not set
-+# CONFIG_BLK_DEV_IT821X is not set
-+# CONFIG_BLK_DEV_NS87415 is not set
-+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-+# CONFIG_BLK_DEV_SVWKS is not set
-+# CONFIG_BLK_DEV_SIIMAGE is not set
-+# CONFIG_BLK_DEV_SIS5513 is not set
-+# CONFIG_BLK_DEV_SLC90E66 is not set
-+# CONFIG_BLK_DEV_TRM290 is not set
-+# CONFIG_BLK_DEV_VIA82CXXX is not set
-+# CONFIG_BLK_DEV_TC86C001 is not set
-+# CONFIG_IDE_ARM is not set
-+CONFIG_BLK_DEV_IDEDMA=y
-+# CONFIG_IDEDMA_IVB is not set
-+# CONFIG_BLK_DEV_HD is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+CONFIG_BLK_DEV_SR=m
-+CONFIG_BLK_DEV_SR_VENDOR=y
-+CONFIG_CHR_DEV_SG=m
-+CONFIG_CHR_DEV_SCH=m
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+CONFIG_SCSI_CONSTANTS=y
-+CONFIG_SCSI_LOGGING=y
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+
-+#
-+# SCSI low-level drivers
-+#
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-+# CONFIG_SCSI_3W_9XXX is not set
-+# CONFIG_SCSI_ACARD is not set
-+# CONFIG_SCSI_AACRAID is not set
-+# CONFIG_SCSI_AIC7XXX is not set
-+# CONFIG_SCSI_AIC7XXX_OLD is not set
-+# CONFIG_SCSI_AIC79XX is not set
-+# CONFIG_SCSI_AIC94XX is not set
-+# CONFIG_SCSI_DPT_I2O is not set
-+# CONFIG_SCSI_ADVANSYS is not set
-+# CONFIG_SCSI_ARCMSR is not set
-+# CONFIG_MEGARAID_NEWGEN is not set
-+# CONFIG_MEGARAID_LEGACY is not set
-+# CONFIG_MEGARAID_SAS is not set
-+# CONFIG_SCSI_HPTIOP is not set
-+# CONFIG_SCSI_BUSLOGIC is not set
-+# CONFIG_SCSI_DMX3191D is not set
-+# CONFIG_SCSI_EATA is not set
-+# CONFIG_SCSI_FUTURE_DOMAIN is not set
-+# CONFIG_SCSI_GDTH is not set
-+# CONFIG_SCSI_IPS is not set
-+# CONFIG_SCSI_INITIO is not set
-+# CONFIG_SCSI_INIA100 is not set
-+# CONFIG_SCSI_STEX is not set
-+# CONFIG_SCSI_SYM53C8XX_2 is not set
-+# CONFIG_SCSI_QLOGIC_1280 is not set
-+# CONFIG_SCSI_QLA_FC is not set
-+# CONFIG_SCSI_QLA_ISCSI is not set
-+# CONFIG_SCSI_LPFC is not set
-+# CONFIG_SCSI_DC395x is not set
-+# CONFIG_SCSI_DC390T is not set
-+# CONFIG_SCSI_NSP32 is not set
-+# CONFIG_SCSI_DEBUG is not set
-+# CONFIG_SCSI_SRP is not set
-+# CONFIG_ATA is not set
-+
-+#
-+# Multi-device support (RAID and LVM)
-+#
-+# CONFIG_MD is not set
-+
-+#
-+# Fusion MPT device support
-+#
-+# CONFIG_FUSION is not set
-+# CONFIG_FUSION_SPI is not set
-+# CONFIG_FUSION_FC is not set
-+# CONFIG_FUSION_SAS is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+# CONFIG_FIREWIRE is not set
-+# CONFIG_IEEE1394 is not set
-+
-+#
-+# I2O device support
-+#
-+# CONFIG_I2O is not set
-+# CONFIG_MACINTOSH_DRIVERS is not set
-+
-+#
-+# Network device support
-+#
-+CONFIG_NETDEVICES=y
-+CONFIG_IFB=m
-+CONFIG_DUMMY=m
-+# CONFIG_BONDING is not set
-+# CONFIG_EQUALIZER is not set
-+CONFIG_TUN=m
-+# CONFIG_ARCNET is not set
-+# CONFIG_PHYLIB is not set
-+
-+#
-+# Ethernet (10 or 100Mbit)
-+#
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=m
-+# CONFIG_HAPPYMEAL is not set
-+# CONFIG_SUNGEM is not set
-+# CONFIG_CASSINI is not set
-+# CONFIG_NET_VENDOR_3COM is not set
-+
-+#
-+# Tulip family network device support
-+#
-+# CONFIG_NET_TULIP is not set
-+# CONFIG_HP100 is not set
-+CONFIG_NET_PCI=y
-+CONFIG_PCNET32=m
-+# CONFIG_PCNET32_NAPI is not set
-+# CONFIG_AMD8111_ETH is not set
-+# CONFIG_ADAPTEC_STARFIRE is not set
-+# CONFIG_B44 is not set
-+# CONFIG_FORCEDETH is not set
-+# CONFIG_DGRS is not set
-+# CONFIG_EEPRO100 is not set
-+# CONFIG_E100 is not set
-+# CONFIG_FEALNX is not set
-+# CONFIG_NATSEMI is not set
-+CONFIG_NE2K_PCI=m
-+CONFIG_8139CP=m
-+# CONFIG_8139TOO is not set
-+# CONFIG_SIS900 is not set
-+# CONFIG_EPIC100 is not set
-+# CONFIG_SUNDANCE is not set
-+# CONFIG_TLAN is not set
-+# CONFIG_VIA_RHINE is not set
-+# CONFIG_SC92031 is not set
-+CONFIG_NETDEV_1000=y
-+# CONFIG_ACENIC is not set
-+# CONFIG_DL2K is not set
-+# CONFIG_E1000 is not set
-+# CONFIG_NS83820 is not set
-+# CONFIG_HAMACHI is not set
-+# CONFIG_YELLOWFIN is not set
-+# CONFIG_R8169 is not set
-+# CONFIG_SIS190 is not set
-+# CONFIG_SKGE is not set
-+# CONFIG_SKY2 is not set
-+# CONFIG_SK98LIN is not set
-+# CONFIG_VIA_VELOCITY is not set
-+# CONFIG_TIGON3 is not set
-+# CONFIG_BNX2 is not set
-+# CONFIG_QLA3XXX is not set
-+# CONFIG_ATL1 is not set
-+CONFIG_NETDEV_10000=y
-+# CONFIG_CHELSIO_T1 is not set
-+# CONFIG_CHELSIO_T3 is not set
-+# CONFIG_IXGB is not set
-+# CONFIG_S2IO is not set
-+# CONFIG_MYRI10GE is not set
-+# CONFIG_NETXEN_NIC is not set
-+# CONFIG_MLX4_CORE is not set
-+# CONFIG_TR is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+CONFIG_WLAN_80211=y
-+# CONFIG_IPW2100 is not set
-+# CONFIG_IPW2200 is not set
-+CONFIG_LIBERTAS=m
-+CONFIG_LIBERTAS_USB=m
-+CONFIG_LIBERTAS_DEBUG=y
-+# CONFIG_AIRO is not set
-+# CONFIG_HERMES is not set
-+# CONFIG_ATMEL is not set
-+# CONFIG_PRISM54 is not set
-+# CONFIG_USB_ZD1201 is not set
-+# CONFIG_PRISM54_USB is not set
-+# CONFIG_HOSTAP is not set
-+# CONFIG_BCM43XX is not set
-+# CONFIG_ZD1211RW is not set
-+# CONFIG_ADM8211 is not set
-+# CONFIG_ACX_PCI is not set
-+# CONFIG_ACX_USB is not set
-+
-+#
-+# USB Network Adapters
-+#
-+CONFIG_USB_CATC=m
-+CONFIG_USB_KAWETH=m
-+CONFIG_USB_PEGASUS=m
-+CONFIG_USB_RTL8150=m
-+CONFIG_USB_USBNET_MII=m
-+CONFIG_USB_USBNET=m
-+CONFIG_USB_NET_AX8817X=m
-+CONFIG_USB_NET_CDCETHER=m
-+CONFIG_USB_NET_DM9601=m
-+CONFIG_USB_NET_GL620A=m
-+CONFIG_USB_NET_NET1080=m
-+CONFIG_USB_NET_PLUSB=m
-+CONFIG_USB_NET_MCS7830=m
-+CONFIG_USB_NET_RNDIS_HOST=m
-+CONFIG_USB_NET_CDC_SUBSET=m
-+CONFIG_USB_ALI_M5632=y
-+CONFIG_USB_AN2720=y
-+CONFIG_USB_BELKIN=y
-+CONFIG_USB_ARMLINUX=y
-+CONFIG_USB_EPSON2888=y
-+# CONFIG_USB_KC2190 is not set
-+CONFIG_USB_NET_ZAURUS=m
-+# CONFIG_WAN is not set
-+# CONFIG_FDDI is not set
-+# CONFIG_HIPPI is not set
-+CONFIG_PPP=m
-+CONFIG_PPP_MULTILINK=y
-+CONFIG_PPP_FILTER=y
-+CONFIG_PPP_ASYNC=m
-+CONFIG_PPP_SYNC_TTY=m
-+CONFIG_PPP_DEFLATE=m
-+# CONFIG_PPP_BSDCOMP is not set
-+CONFIG_PPP_MPPE=m
-+CONFIG_PPPOE=m
-+CONFIG_SLIP=m
-+CONFIG_SLIP_COMPRESSED=y
-+CONFIG_SLHC=m
-+CONFIG_SLIP_SMART=y
-+# CONFIG_SLIP_MODE_SLIP6 is not set
-+# CONFIG_NET_FC is not set
-+# CONFIG_SHAPER is not set
-+CONFIG_NETCONSOLE=m
-+CONFIG_NETPOLL=y
-+CONFIG_NETPOLL_TRAP=y
-+CONFIG_NET_POLL_CONTROLLER=y
-+
-+#
-+# ISDN subsystem
-+#
-+# CONFIG_ISDN is not set
-+
-+#
-+# Telephony Support
-+#
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=m
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+CONFIG_INPUT_JOYDEV=m
-+# CONFIG_INPUT_TSDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+CONFIG_KEYBOARD_ATKBD=y
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_INPUT_MOUSE=y
-+CONFIG_MOUSE_PS2=m
-+# CONFIG_MOUSE_PS2_ALPS is not set
-+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
-+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
-+# CONFIG_MOUSE_PS2_LIFEBOOK is not set
-+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
-+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-+CONFIG_MOUSE_PS2_OLPC=y
-+# CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_APPLETOUCH is not set
-+# CONFIG_MOUSE_VSXXXAA is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+CONFIG_INPUT_MISC=y
-+CONFIG_INPUT_PCSPKR=m
-+# CONFIG_INPUT_WISTRON_BTNS is not set
-+# CONFIG_INPUT_ATI_REMOTE is not set
-+# CONFIG_INPUT_ATI_REMOTE2 is not set
-+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-+# CONFIG_INPUT_POWERMATE is not set
-+# CONFIG_INPUT_YEALINK is not set
-+CONFIG_INPUT_UINPUT=m
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=y
-+CONFIG_SERIO_I8042=y
-+CONFIG_SERIO_SERPORT=y
-+# CONFIG_SERIO_CT82C710 is not set
-+# CONFIG_SERIO_PCIPS2 is not set
-+CONFIG_SERIO_LIBPS2=y
-+CONFIG_SERIO_RAW=m
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+CONFIG_SERIAL_8250=y
-+CONFIG_SERIAL_8250_CONSOLE=y
-+CONFIG_SERIAL_8250_PCI=y
-+CONFIG_SERIAL_8250_NR_UARTS=1
-+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-+CONFIG_SERIAL_8250_EXTENDED=y
-+CONFIG_SERIAL_8250_MANY_PORTS=y
-+CONFIG_SERIAL_8250_SHARE_IRQ=y
-+CONFIG_SERIAL_8250_DETECT_IRQ=y
-+CONFIG_SERIAL_8250_RSA=y
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+# CONFIG_SERIAL_JSM is not set
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+
-+#
-+# IPMI
-+#
-+# CONFIG_IPMI_HANDLER is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+CONFIG_SOFT_WATCHDOG=m
-+# CONFIG_ACQUIRE_WDT is not set
-+# CONFIG_ADVANTECH_WDT is not set
-+# CONFIG_ALIM1535_WDT is not set
-+# CONFIG_ALIM7101_WDT is not set
-+# CONFIG_SC520_WDT is not set
-+# CONFIG_EUROTECH_WDT is not set
-+# CONFIG_IB700_WDT is not set
-+# CONFIG_IBMASR is not set
-+# CONFIG_WAFER_WDT is not set
-+# CONFIG_I6300ESB_WDT is not set
-+# CONFIG_ITCO_WDT is not set
-+# CONFIG_SC1200_WDT is not set
-+# CONFIG_PC87413_WDT is not set
-+# CONFIG_60XX_WDT is not set
-+# CONFIG_SBC8360_WDT is not set
-+# CONFIG_CPU5_WDT is not set
-+# CONFIG_SMSC37B787_WDT is not set
-+# CONFIG_W83627HF_WDT is not set
-+# CONFIG_W83697HF_WDT is not set
-+# CONFIG_W83877F_WDT is not set
-+# CONFIG_W83977F_WDT is not set
-+# CONFIG_MACHZ_WDT is not set
-+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
-+
-+#
-+# PCI-based Watchdog Cards
-+#
-+# CONFIG_PCIPCWATCHDOG is not set
-+# CONFIG_WDTPCI is not set
-+
-+#
-+# USB-based Watchdog Cards
-+#
-+# CONFIG_USBPCWATCHDOG is not set
-+CONFIG_HW_RANDOM=y
-+# CONFIG_HW_RANDOM_INTEL is not set
-+# CONFIG_HW_RANDOM_AMD is not set
-+CONFIG_HW_RANDOM_GEODE=y
-+# CONFIG_HW_RANDOM_VIA is not set
-+CONFIG_NVRAM=y
-+# CONFIG_RTC is not set
-+# CONFIG_GEN_RTC is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_APPLICOM is not set
-+# CONFIG_SONYPI is not set
-+# CONFIG_AGP is not set
-+# CONFIG_DRM is not set
-+# CONFIG_MWAVE is not set
-+# CONFIG_PC8736x_GPIO is not set
-+# CONFIG_NSC_GPIO is not set
-+CONFIG_CS5535_GPIO=m
-+# CONFIG_RAW_DRIVER is not set
-+CONFIG_HANGCHECK_TIMER=m
-+
-+#
-+# TPM devices
-+#
-+# CONFIG_TCG_TPM is not set
-+# CONFIG_TELCLOCK is not set
-+CONFIG_DEVPORT=y
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
-+
-+#
-+# I2C Algorithms
-+#
-+# CONFIG_I2C_ALGOBIT is not set
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+# CONFIG_I2C_ALI1535 is not set
-+# CONFIG_I2C_ALI1563 is not set
-+# CONFIG_I2C_ALI15X3 is not set
-+# CONFIG_I2C_AMD756 is not set
-+# CONFIG_I2C_AMD8111 is not set
-+# CONFIG_I2C_I801 is not set
-+# CONFIG_I2C_I810 is not set
-+# CONFIG_I2C_PIIX4 is not set
-+# CONFIG_I2C_NFORCE2 is not set
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_PROSAVAGE is not set
-+# CONFIG_I2C_SAVAGE4 is not set
-+# CONFIG_I2C_SIMTEC is not set
-+CONFIG_SCx200_ACB=y
-+# CONFIG_I2C_SIS5595 is not set
-+# CONFIG_I2C_SIS630 is not set
-+# CONFIG_I2C_SIS96X is not set
-+# CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_TINY_USB is not set
-+# CONFIG_I2C_VIA is not set
-+# CONFIG_I2C_VIAPRO is not set
-+# CONFIG_I2C_VOODOO3 is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+
-+#
-+# SPI support
-+#
-+# CONFIG_SPI is not set
-+# CONFIG_SPI_MASTER is not set
-+
-+#
-+# Dallas's 1-wire bus
-+#
-+# CONFIG_W1 is not set
-+CONFIG_POWER_SUPPLY=y
-+# CONFIG_POWER_SUPPLY_DEBUG is not set
-+# CONFIG_PDA_POWER is not set
-+# CONFIG_BATTERY_DS2760 is not set
-+CONFIG_BATTERY_OLPC=y
-+# CONFIG_HWMON is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# Multimedia devices
-+#
-+CONFIG_VIDEO_DEV=y
-+# CONFIG_VIDEO_V4L1 is not set
-+CONFIG_VIDEO_V4L1_COMPAT=y
-+CONFIG_VIDEO_V4L2=y
-+CONFIG_VIDEO_CAPTURE_DRIVERS=y
-+# CONFIG_VIDEO_ADV_DEBUG is not set
-+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-+
-+#
-+# Encoders/decoders and other helper chips
-+#
-+
-+#
-+# Audio decoders
-+#
-+# CONFIG_VIDEO_TDA9840 is not set
-+# CONFIG_VIDEO_TEA6415C is not set
-+# CONFIG_VIDEO_TEA6420 is not set
-+# CONFIG_VIDEO_MSP3400 is not set
-+# CONFIG_VIDEO_CS53L32A is not set
-+# CONFIG_VIDEO_TLV320AIC23B is not set
-+# CONFIG_VIDEO_WM8775 is not set
-+# CONFIG_VIDEO_WM8739 is not set
-+
-+#
-+# Video decoders
-+#
-+CONFIG_VIDEO_OV7670=y
-+# CONFIG_VIDEO_SAA711X is not set
-+# CONFIG_VIDEO_TVP5150 is not set
-+
-+#
-+# Video and audio decoders
-+#
-+# CONFIG_VIDEO_CX25840 is not set
-+
-+#
-+# MPEG video encoders
-+#
-+# CONFIG_VIDEO_CX2341X is not set
-+
-+#
-+# Video encoders
-+#
-+# CONFIG_VIDEO_SAA7127 is not set
-+
-+#
-+# Video improvement chips
-+#
-+# CONFIG_VIDEO_UPD64031A is not set
-+# CONFIG_VIDEO_UPD64083 is not set
-+# CONFIG_VIDEO_VIVI is not set
-+# CONFIG_VIDEO_SAA5246A is not set
-+# CONFIG_VIDEO_SAA5249 is not set
-+# CONFIG_VIDEO_SAA7134 is not set
-+# CONFIG_VIDEO_HEXIUM_ORION is not set
-+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-+# CONFIG_VIDEO_CX88 is not set
-+CONFIG_VIDEO_CAFE_CCIC=y
-+CONFIG_V4L_USB_DRIVERS=y
-+# CONFIG_VIDEO_PVRUSB2 is not set
-+# CONFIG_VIDEO_USBVISION is not set
-+# CONFIG_USB_SN9C102 is not set
-+# CONFIG_USB_ZR364XX is not set
-+CONFIG_RADIO_ADAPTERS=y
-+# CONFIG_RADIO_GEMTEK_PCI is not set
-+# CONFIG_RADIO_MAXIRADIO is not set
-+# CONFIG_RADIO_MAESTRO is not set
-+# CONFIG_USB_DSBR is not set
-+# CONFIG_DVB_CORE is not set
-+CONFIG_DAB=y
-+# CONFIG_USB_DABUSB is not set
-+
-+#
-+# Graphics support
-+#
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_BACKLIGHT_CLASS_DEVICE=y
-+CONFIG_LCD_CLASS_DEVICE=y
-+# CONFIG_BACKLIGHT_PROGEAR is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+CONFIG_VGASTATE=m
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+CONFIG_FB_DEFERRED_IO=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+CONFIG_FB_MODE_HELPERS=y
-+CONFIG_FB_TILEBLITTING=y
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_CIRRUS is not set
-+# CONFIG_FB_PM2 is not set
-+# CONFIG_FB_CYBER2000 is not set
-+# CONFIG_FB_ARC is not set
-+# CONFIG_FB_ASILIANT is not set
-+# CONFIG_FB_IMSTT is not set
-+CONFIG_FB_VGA16=m
-+CONFIG_FB_VESA=y
-+# CONFIG_FB_HECUBA is not set
-+# CONFIG_FB_HGA is not set
-+# CONFIG_FB_S1D13XXX is not set
-+# CONFIG_FB_NVIDIA is not set
-+# CONFIG_FB_RIVA is not set
-+# CONFIG_FB_I810 is not set
-+# CONFIG_FB_LE80578 is not set
-+# CONFIG_FB_INTEL is not set
-+# CONFIG_FB_MATROX is not set
-+# CONFIG_FB_RADEON is not set
-+# CONFIG_FB_ATY128 is not set
-+# CONFIG_FB_ATY is not set
-+# CONFIG_FB_S3 is not set
-+# CONFIG_FB_SAVAGE is not set
-+# CONFIG_FB_SIS is not set
-+# CONFIG_FB_NEOMAGIC is not set
-+# CONFIG_FB_KYRO is not set
-+# CONFIG_FB_3DFX is not set
-+# CONFIG_FB_VOODOO1 is not set
-+# CONFIG_FB_VT8623 is not set
-+# CONFIG_FB_CYBLA is not set
-+# CONFIG_FB_TRIDENT is not set
-+# CONFIG_FB_ARK is not set
-+# CONFIG_FB_PM3 is not set
-+CONFIG_FB_GEODE=y
-+CONFIG_FB_GEODE_LX=y
-+CONFIG_FB_GEODE_GX=y
-+# CONFIG_FB_GEODE_GX1 is not set
-+CONFIG_FB_OLPC_DCON=y
-+# CONFIG_FB_VIRTUAL is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_VGA_CONSOLE=y
-+CONFIG_VGACON_SOFT_SCROLLBACK=y
-+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-+CONFIG_VIDEO_SELECT=y
-+CONFIG_DUMMY_CONSOLE=y
-+CONFIG_FRAMEBUFFER_CONSOLE=y
-+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-+CONFIG_FONTS=y
-+# CONFIG_FONT_8x8 is not set
-+CONFIG_FONT_8x16=y
-+# CONFIG_FONT_6x11 is not set
-+# CONFIG_FONT_7x14 is not set
-+# CONFIG_FONT_PEARL_8x8 is not set
-+# CONFIG_FONT_ACORN_8x8 is not set
-+# CONFIG_FONT_MINI_4x6 is not set
-+# CONFIG_FONT_SUN8x16 is not set
-+CONFIG_FONT_SUN12x22=y
-+# CONFIG_FONT_10x18 is not set
-+CONFIG_LOGO=y
-+# CONFIG_LOGO_LINUX_MONO is not set
-+# CONFIG_LOGO_LINUX_VGA16 is not set
-+CONFIG_LOGO_LINUX_CLUT224=y
-+
-+#
-+# Sound
-+#
-+CONFIG_SOUND=y
-+
-+#
-+# Advanced Linux Sound Architecture
-+#
-+CONFIG_SND=y
-+CONFIG_SND_TIMER=y
-+CONFIG_SND_PCM=y
-+CONFIG_SND_HWDEP=m
-+CONFIG_SND_RAWMIDI=m
-+CONFIG_SND_SEQUENCER=m
-+CONFIG_SND_SEQ_DUMMY=m
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+CONFIG_SND_SEQUENCER_OSS=y
-+CONFIG_SND_DYNAMIC_MINORS=y
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+CONFIG_SND_VERBOSE_PROCFS=y
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+
-+#
-+# Generic devices
-+#
-+CONFIG_SND_MPU401_UART=m
-+CONFIG_SND_AC97_CODEC=y
-+CONFIG_SND_DUMMY=m
-+CONFIG_SND_VIRMIDI=m
-+CONFIG_SND_MTPAV=m
-+# CONFIG_SND_SERIAL_U16550 is not set
-+CONFIG_SND_MPU401=m
-+
-+#
-+# PCI devices
-+#
-+# CONFIG_SND_AD1889 is not set
-+# CONFIG_SND_ALS300 is not set
-+# CONFIG_SND_ALS4000 is not set
-+# CONFIG_SND_ALI5451 is not set
-+# CONFIG_SND_ATIIXP is not set
-+# CONFIG_SND_ATIIXP_MODEM is not set
-+# CONFIG_SND_AU8810 is not set
-+# CONFIG_SND_AU8820 is not set
-+# CONFIG_SND_AU8830 is not set
-+# CONFIG_SND_AZT3328 is not set
-+# CONFIG_SND_BT87X is not set
-+# CONFIG_SND_CA0106 is not set
-+# CONFIG_SND_CMIPCI is not set
-+# CONFIG_SND_CS4281 is not set
-+# CONFIG_SND_CS46XX is not set
-+CONFIG_SND_CS5535AUDIO=y
-+# CONFIG_SND_DARLA20 is not set
-+# CONFIG_SND_GINA20 is not set
-+# CONFIG_SND_LAYLA20 is not set
-+# CONFIG_SND_DARLA24 is not set
-+# CONFIG_SND_GINA24 is not set
-+# CONFIG_SND_LAYLA24 is not set
-+# CONFIG_SND_MONA is not set
-+# CONFIG_SND_MIA is not set
-+# CONFIG_SND_ECHO3G is not set
-+# CONFIG_SND_INDIGO is not set
-+# CONFIG_SND_INDIGOIO is not set
-+# CONFIG_SND_INDIGODJ is not set
-+# CONFIG_SND_EMU10K1 is not set
-+# CONFIG_SND_EMU10K1X is not set
-+CONFIG_SND_ENS1370=m
-+CONFIG_SND_ENS1371=m
-+# CONFIG_SND_ES1938 is not set
-+# CONFIG_SND_ES1968 is not set
-+# CONFIG_SND_FM801 is not set
-+# CONFIG_SND_HDA_INTEL is not set
-+# CONFIG_SND_HDSP is not set
-+# CONFIG_SND_HDSPM is not set
-+# CONFIG_SND_ICE1712 is not set
-+# CONFIG_SND_ICE1724 is not set
-+CONFIG_SND_INTEL8X0=m
-+# CONFIG_SND_INTEL8X0M is not set
-+# CONFIG_SND_KORG1212 is not set
-+# CONFIG_SND_MAESTRO3 is not set
-+# CONFIG_SND_MIXART is not set
-+# CONFIG_SND_NM256 is not set
-+# CONFIG_SND_PCXHR is not set
-+# CONFIG_SND_RIPTIDE is not set
-+# CONFIG_SND_RME32 is not set
-+# CONFIG_SND_RME96 is not set
-+# CONFIG_SND_RME9652 is not set
-+# CONFIG_SND_SONICVIBES is not set
-+# CONFIG_SND_TRIDENT is not set
-+# CONFIG_SND_VIA82XX is not set
-+# CONFIG_SND_VIA82XX_MODEM is not set
-+# CONFIG_SND_VX222 is not set
-+# CONFIG_SND_YMFPCI is not set
-+CONFIG_SND_AC97_POWER_SAVE=y
-+
-+#
-+# USB devices
-+#
-+CONFIG_SND_USB_AUDIO=m
-+CONFIG_SND_USB_USX2Y=m
-+# CONFIG_SND_USB_CAIAQ is not set
-+
-+#
-+# System on Chip audio support
-+#
-+# CONFIG_SND_SOC is not set
-+
-+#
-+# Open Sound System
-+#
-+# CONFIG_SOUND_PRIME is not set
-+CONFIG_AC97_BUS=y
-+
-+#
-+# HID Devices
-+#
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+
-+#
-+# USB Input Devices
-+#
-+CONFIG_USB_HID=y
-+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-+# CONFIG_HID_FF is not set
-+CONFIG_USB_HIDDEV=y
-+
-+#
-+# USB support
-+#
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_DEVICE_CLASS is not set
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_SUSPEND is not set
-+CONFIG_USB_PERSIST=y
-+# CONFIG_USB_OTG is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_EHCI_SPLIT_ISO=y
-+CONFIG_USB_EHCI_ROOT_HUB_TT=y
-+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
-+# CONFIG_USB_ISP116X_HCD is not set
-+CONFIG_USB_OHCI_HCD=y
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-+# CONFIG_USB_UHCI_HCD is not set
-+# CONFIG_USB_SL811_HCD is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+CONFIG_USB_ACM=m
-+CONFIG_USB_PRINTER=m
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+CONFIG_USB_STORAGE_DATAFAB=y
-+CONFIG_USB_STORAGE_FREECOM=y
-+CONFIG_USB_STORAGE_DPCM=y
-+CONFIG_USB_STORAGE_USBAT=y
-+CONFIG_USB_STORAGE_SDDR09=y
-+CONFIG_USB_STORAGE_SDDR55=y
-+CONFIG_USB_STORAGE_JUMPSHOT=y
-+CONFIG_USB_STORAGE_ALAUDA=y
-+# CONFIG_USB_STORAGE_KARMA is not set
-+CONFIG_USB_LIBUSUAL=y
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+CONFIG_USB_MON=y
-+
-+#
-+# USB port drivers
-+#
-+
-+#
-+# USB Serial Converter support
-+#
-+CONFIG_USB_SERIAL=m
-+CONFIG_USB_SERIAL_GENERIC=y
-+# CONFIG_USB_SERIAL_AIRCABLE is not set
-+# CONFIG_USB_SERIAL_AIRPRIME is not set
-+# CONFIG_USB_SERIAL_ARK3116 is not set
-+# CONFIG_USB_SERIAL_BELKIN is not set
-+# CONFIG_USB_SERIAL_WHITEHEAT is not set
-+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-+CONFIG_USB_SERIAL_CP2101=m
-+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-+# CONFIG_USB_SERIAL_EMPEG is not set
-+CONFIG_USB_SERIAL_FTDI_SIO=m
-+# CONFIG_USB_SERIAL_FUNSOFT is not set
-+# CONFIG_USB_SERIAL_VISOR is not set
-+# CONFIG_USB_SERIAL_IPAQ is not set
-+# CONFIG_USB_SERIAL_IR is not set
-+# CONFIG_USB_SERIAL_EDGEPORT is not set
-+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-+# CONFIG_USB_SERIAL_GARMIN is not set
-+# CONFIG_USB_SERIAL_IPW is not set
-+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-+# CONFIG_USB_SERIAL_KEYSPAN is not set
-+# CONFIG_USB_SERIAL_KLSI is not set
-+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-+# CONFIG_USB_SERIAL_MCT_U232 is not set
-+# CONFIG_USB_SERIAL_MOS7720 is not set
-+# CONFIG_USB_SERIAL_MOS7840 is not set
-+# CONFIG_USB_SERIAL_NAVMAN is not set
-+CONFIG_USB_SERIAL_PL2303=m
-+# CONFIG_USB_SERIAL_HP4X is not set
-+# CONFIG_USB_SERIAL_SAFE is not set
-+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-+# CONFIG_USB_SERIAL_TI is not set
-+# CONFIG_USB_SERIAL_CYBERJACK is not set
-+# CONFIG_USB_SERIAL_XIRCOM is not set
-+# CONFIG_USB_SERIAL_OPTION is not set
-+# CONFIG_USB_SERIAL_OMNINET is not set
-+# CONFIG_USB_SERIAL_DEBUG is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_SISUSBVGA is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+
-+#
-+# USB DSL modem support
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+# CONFIG_USB_GADGET is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+CONFIG_MMC_SDHCI=y
-+# CONFIG_MMC_WBSD is not set
-+# CONFIG_MMC_TIFM_SD is not set
-+
-+#
-+# LED devices
-+#
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+
-+#
-+# LED drivers
-+#
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-+
-+#
-+# InfiniBand support
-+#
-+# CONFIG_INFINIBAND is not set
-+
-+#
-+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-+#
-+# CONFIG_EDAC is not set
-+
-+#
-+# Real Time Clock
-+#
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+# CONFIG_RTC_HCTOSYS is not set
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+
-+#
-+# Platform RTC drivers
-+#
-+CONFIG_RTC_DRV_CMOS=y
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+
-+#
-+# DMA Engine support
-+#
-+# CONFIG_DMA_ENGINE is not set
-+
-+#
-+# DMA Clients
-+#
-+
-+#
-+# DMA Devices
-+#
-+
-+#
-+# Virtualization
-+#
-+# CONFIG_KVM is not set
-+
-+#
-+# Sysprof
-+#
-+CONFIG_SYSPROF=m
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+CONFIG_EXT2_FS_XATTR=y
-+# CONFIG_EXT2_FS_POSIX_ACL is not set
-+CONFIG_EXT2_FS_SECURITY=y
-+CONFIG_EXT2_FS_XIP=y
-+CONFIG_FS_XIP=y
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+CONFIG_EXT3_FS_SECURITY=y
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+CONFIG_QUOTA=y
-+# CONFIG_QFMT_V1 is not set
-+CONFIG_QFMT_V2=y
-+CONFIG_QUOTACTL=y
-+CONFIG_DNOTIFY=y
-+CONFIG_AUTOFS_FS=m
-+CONFIG_AUTOFS4_FS=m
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+CONFIG_ISO9660_FS=m
-+CONFIG_JOLIET=y
-+CONFIG_ZISOFS=y
-+CONFIG_UDF_FS=m
-+CONFIG_UDF_NLS=y
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=m
-+CONFIG_MSDOS_FS=m
-+CONFIG_VFAT_FS=m
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_KCORE=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+CONFIG_HUGETLBFS=y
-+CONFIG_HUGETLB_PAGE=y
-+CONFIG_PROMFS_FS=y
-+CONFIG_RAMFS=y
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_ECRYPT_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+CONFIG_JFFS2_FS_WBUF_VERIFY=y
-+CONFIG_JFFS2_SUMMARY=y
-+CONFIG_JFFS2_FS_XATTR=y
-+# CONFIG_JFFS2_FS_POSIX_ACL is not set
-+CONFIG_JFFS2_FS_SECURITY=y
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+CONFIG_CRAMFS=m
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+
-+#
-+# Network File Systems
-+#
-+CONFIG_NFS_FS=m
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+CONFIG_NFS_V4=y
-+CONFIG_NFS_DIRECTIO=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=m
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=m
-+CONFIG_SUNRPC_GSS=m
-+# CONFIG_SUNRPC_BIND34 is not set
-+CONFIG_RPCSEC_GSS_KRB5=m
-+CONFIG_RPCSEC_GSS_SPKM3=m
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+# CONFIG_9P_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_BSD_DISKLABEL is not set
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+# CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="utf8"
-+CONFIG_NLS_CODEPAGE_437=y
-+CONFIG_NLS_CODEPAGE_737=m
-+CONFIG_NLS_CODEPAGE_775=m
-+CONFIG_NLS_CODEPAGE_850=m
-+CONFIG_NLS_CODEPAGE_852=m
-+CONFIG_NLS_CODEPAGE_855=m
-+CONFIG_NLS_CODEPAGE_857=m
-+CONFIG_NLS_CODEPAGE_860=m
-+CONFIG_NLS_CODEPAGE_861=m
-+CONFIG_NLS_CODEPAGE_862=m
-+CONFIG_NLS_CODEPAGE_863=m
-+CONFIG_NLS_CODEPAGE_864=m
-+CONFIG_NLS_CODEPAGE_865=m
-+CONFIG_NLS_CODEPAGE_866=m
-+CONFIG_NLS_CODEPAGE_869=m
-+CONFIG_NLS_CODEPAGE_936=m
-+CONFIG_NLS_CODEPAGE_950=m
-+CONFIG_NLS_CODEPAGE_932=m
-+CONFIG_NLS_CODEPAGE_949=m
-+CONFIG_NLS_CODEPAGE_874=m
-+CONFIG_NLS_ISO8859_8=m
-+CONFIG_NLS_CODEPAGE_1250=m
-+CONFIG_NLS_CODEPAGE_1251=m
-+CONFIG_NLS_ASCII=y
-+CONFIG_NLS_ISO8859_1=m
-+CONFIG_NLS_ISO8859_2=m
-+CONFIG_NLS_ISO8859_3=m
-+CONFIG_NLS_ISO8859_4=m
-+CONFIG_NLS_ISO8859_5=m
-+CONFIG_NLS_ISO8859_6=m
-+CONFIG_NLS_ISO8859_7=m
-+CONFIG_NLS_ISO8859_9=m
-+CONFIG_NLS_ISO8859_13=m
-+CONFIG_NLS_ISO8859_14=m
-+CONFIG_NLS_ISO8859_15=m
-+CONFIG_NLS_KOI8_R=m
-+CONFIG_NLS_KOI8_U=m
-+CONFIG_NLS_UTF8=m
-+
-+#
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
-+# Instrumentation Support
-+#
-+CONFIG_PROFILING=y
-+CONFIG_OPROFILE=m
-+CONFIG_KPROBES=y
-+
-+#
-+# Kernel hacking
-+#
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_PRINTK_TIME=y
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+CONFIG_MAGIC_SYSRQ=y
-+CONFIG_UNUSED_SYMBOLS=y
-+CONFIG_DEBUG_FS=y
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHEDSTATS=y
-+CONFIG_TIMER_STATS=y
-+# CONFIG_DEBUG_SLAB is not set
-+CONFIG_DEBUG_PREEMPT=y
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+CONFIG_DEBUG_SPINLOCK=y
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+CONFIG_DEBUG_SPINLOCK_SLEEP=y
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+# CONFIG_DEBUG_BUGVERBOSE is not set
-+CONFIG_DEBUG_INFO=y
-+CONFIG_DEBUG_VM=y
-+CONFIG_DEBUG_LIST=y
-+# CONFIG_FRAME_POINTER is not set
-+# CONFIG_FORCED_INLINING is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_LKDTM is not set
-+# CONFIG_FAULT_INJECTION is not set
-+CONFIG_EARLY_PRINTK=y
-+CONFIG_DEBUG_STACKOVERFLOW=y
-+CONFIG_DEBUG_STACK_USAGE=y
-+
-+#
-+# Page alloc debug is incompatible with Software Suspend on i386
-+#
-+CONFIG_DEBUG_RODATA=y
-+CONFIG_4KSTACKS=y
-+CONFIG_DOUBLEFAULT=y
-+
-+#
-+# Security options
-+#
-+CONFIG_KEYS=y
-+CONFIG_KEYS_DEBUG_PROC_KEYS=y
-+CONFIG_SECURITY=y
-+CONFIG_SECURITY_NETWORK=y
-+CONFIG_SECURITY_NETWORK_XFRM=y
-+CONFIG_SECURITY_CAPABILITIES=y
-+# CONFIG_SECURITY_ROOTPLUG is not set
-+CONFIG_SECURITY_SELINUX=y
-+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
-+# CONFIG_SECURITY_SELINUX_DISABLE is not set
-+CONFIG_SECURITY_SELINUX_DEVELOP=y
-+CONFIG_SECURITY_SELINUX_AVC_STATS=y
-+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-+# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
-+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
-+
-+#
-+# Cryptographic options
-+#
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_HMAC=y
-+CONFIG_CRYPTO_XCBC=m
-+CONFIG_CRYPTO_NULL=m
-+CONFIG_CRYPTO_MD4=m
-+CONFIG_CRYPTO_MD5=y
-+CONFIG_CRYPTO_SHA1=y
-+CONFIG_CRYPTO_SHA256=m
-+CONFIG_CRYPTO_SHA512=m
-+CONFIG_CRYPTO_WP512=m
-+CONFIG_CRYPTO_TGR192=m
-+CONFIG_CRYPTO_GF128MUL=m
-+CONFIG_CRYPTO_ECB=m
-+CONFIG_CRYPTO_CBC=m
-+CONFIG_CRYPTO_PCBC=m
-+CONFIG_CRYPTO_LRW=m
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_DES=m
-+CONFIG_CRYPTO_FCRYPT=m
-+CONFIG_CRYPTO_BLOWFISH=m
-+CONFIG_CRYPTO_TWOFISH=m
-+CONFIG_CRYPTO_TWOFISH_COMMON=m
-+# CONFIG_CRYPTO_TWOFISH_586 is not set
-+CONFIG_CRYPTO_SERPENT=m
-+CONFIG_CRYPTO_AES=m
-+CONFIG_CRYPTO_AES_586=m
-+CONFIG_CRYPTO_CAST5=m
-+CONFIG_CRYPTO_CAST6=m
-+CONFIG_CRYPTO_TEA=m
-+CONFIG_CRYPTO_ARC4=m
-+CONFIG_CRYPTO_KHAZAD=m
-+CONFIG_CRYPTO_ANUBIS=m
-+CONFIG_CRYPTO_DEFLATE=m
-+CONFIG_CRYPTO_MICHAEL_MIC=m
-+CONFIG_CRYPTO_CRC32C=m
-+CONFIG_CRYPTO_CAMELLIA=m
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Hardware crypto devices
-+#
-+# CONFIG_CRYPTO_DEV_PADLOCK is not set
-+CONFIG_CRYPTO_DEV_GEODE=y
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_CRC_CCITT=m
-+CONFIG_CRC16=m
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+CONFIG_LIBCRC32C=m
-+CONFIG_AUDIT_GENERIC=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_REED_SOLOMON=y
-+CONFIG_REED_SOLOMON_DEC16=y
-+CONFIG_TEXTSEARCH=y
-+CONFIG_TEXTSEARCH_KMP=m
-+CONFIG_TEXTSEARCH_BM=m
-+CONFIG_TEXTSEARCH_FSM=m
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_X86_BIOS_REBOOT=y
-+CONFIG_KTIME_SCALAR=y
-diff --git a/arch/i386/configs/xs_defconfig b/arch/i386/configs/xs_defconfig
-new file mode 100644
-index 0000000..b937de5
---- /dev/null
-+++ b/arch/i386/configs/xs_defconfig
-@@ -0,0 +1,2221 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.22-rc5
-+# Wed Jun 20 08:26:53 2007
-+#
-+CONFIG_X86_32=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_CLOCKSOURCE_WATCHDOG=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_SEMAPHORE_SLEEPERS=y
-+CONFIG_X86=y
-+CONFIG_MMU=y
-+CONFIG_ZONE_DMA=y
-+CONFIG_QUICKLIST=y
-+CONFIG_GENERIC_ISA_DMA=y
-+CONFIG_GENERIC_IOMAP=y
-+CONFIG_GENERIC_BUG=y
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-+CONFIG_DMI=y
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# Code maturity level options
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_LOCK_KERNEL=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+
-+#
-+# General setup
-+#
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+# CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+CONFIG_BSD_PROCESS_ACCT=y
-+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_UTS_NS is not set
-+CONFIG_AUDIT=y
-+CONFIG_AUDITSYSCALL=y
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=17
-+# CONFIG_SYSFS_DEPRECATED is not set
-+CONFIG_RELAY=y
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+CONFIG_UID16=y
-+# CONFIG_SYSCTL_SYSCALL is not set
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+CONFIG_KALLSYMS_EXTRA_PASS=y
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+# CONFIG_BASE_FULL is not set
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=1
-+
-+#
-+# Loadable module support
-+#
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+CONFIG_MODVERSIONS=y
-+CONFIG_MODULE_SRCVERSION_ALL=y
-+CONFIG_KMOD=y
-+
-+#
-+# Block layer
-+#
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+# CONFIG_IOSCHED_AS is not set
-+# CONFIG_IOSCHED_DEADLINE is not set
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+
-+#
-+# Processor type and features
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+# CONFIG_SMP is not set
-+CONFIG_X86_PC=y
-+# CONFIG_X86_ELAN is not set
-+# CONFIG_X86_VOYAGER is not set
-+# CONFIG_X86_NUMAQ is not set
-+# CONFIG_X86_SUMMIT is not set
-+# CONFIG_X86_BIGSMP is not set
-+# CONFIG_X86_VISWS is not set
-+# CONFIG_X86_GENERICARCH is not set
-+# CONFIG_X86_ES7000 is not set
-+# CONFIG_PARAVIRT is not set
-+# CONFIG_M386 is not set
-+# CONFIG_M486 is not set
-+# CONFIG_M586 is not set
-+# CONFIG_M586TSC is not set
-+# CONFIG_M586MMX is not set
-+# CONFIG_M686 is not set
-+# CONFIG_MPENTIUMII is not set
-+# CONFIG_MPENTIUMIII is not set
-+# CONFIG_MPENTIUMM is not set
-+# CONFIG_MCORE2 is not set
-+# CONFIG_MPENTIUM4 is not set
-+# CONFIG_MK6 is not set
-+# CONFIG_MK7 is not set
-+# CONFIG_MK8 is not set
-+# CONFIG_MCRUSOE is not set
-+# CONFIG_MEFFICEON is not set
-+# CONFIG_MWINCHIPC6 is not set
-+# CONFIG_MWINCHIP2 is not set
-+# CONFIG_MWINCHIP3D is not set
-+# CONFIG_MGEODEGX1 is not set
-+CONFIG_MGEODE_LX=y
-+# CONFIG_MCYRIXIII is not set
-+# CONFIG_MVIAC3_2 is not set
-+# CONFIG_MVIAC7 is not set
-+# CONFIG_X86_GENERIC is not set
-+CONFIG_X86_CMPXCHG=y
-+CONFIG_X86_L1_CACHE_SHIFT=5
-+CONFIG_X86_XADD=y
-+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_X86_WP_WORKS_OK=y
-+CONFIG_X86_INVLPG=y
-+CONFIG_X86_BSWAP=y
-+CONFIG_X86_POPAD_OK=y
-+CONFIG_X86_CMPXCHG64=y
-+CONFIG_X86_USE_PPRO_CHECKSUM=y
-+CONFIG_X86_USE_3DNOW=y
-+CONFIG_X86_TSC=y
-+CONFIG_X86_MINIMUM_CPU_MODEL=4
-+# CONFIG_HPET_TIMER is not set
-+# CONFIG_PREEMPT_NONE is not set
-+# CONFIG_PREEMPT_VOLUNTARY is not set
-+CONFIG_PREEMPT=y
-+CONFIG_PREEMPT_BKL=y
-+# CONFIG_X86_UP_APIC is not set
-+# CONFIG_X86_MCE is not set
-+# CONFIG_VM86 is not set
-+# CONFIG_TOSHIBA is not set
-+# CONFIG_I8K is not set
-+CONFIG_X86_REBOOTFIXUPS=y
-+# CONFIG_MICROCODE is not set
-+CONFIG_X86_MSR=y
-+CONFIG_X86_CPUID=m
-+
-+#
-+# Firmware Drivers
-+#
-+# CONFIG_EDD is not set
-+# CONFIG_DELL_RBU is not set
-+# CONFIG_DCDBAS is not set
-+CONFIG_NOHIGHMEM=y
-+# CONFIG_HIGHMEM4G is not set
-+# CONFIG_HIGHMEM64G is not set
-+CONFIG_VMSPLIT_3G=y
-+# CONFIG_VMSPLIT_3G_OPT is not set
-+# CONFIG_VMSPLIT_2G is not set
-+# CONFIG_VMSPLIT_2G_OPT is not set
-+# CONFIG_VMSPLIT_1G is not set
-+CONFIG_PAGE_OFFSET=0xC0000000
-+CONFIG_ARCH_FLATMEM_ENABLE=y
-+CONFIG_ARCH_SPARSEMEM_ENABLE=y
-+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-+CONFIG_ARCH_POPULATES_NODE_MAP=y
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+CONFIG_SPARSEMEM_STATIC=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_NR_QUICK=1
-+# CONFIG_MATH_EMULATION is not set
-+# CONFIG_MTRR is not set
-+# CONFIG_SECCOMP is not set
-+# CONFIG_VGA_NOPROBE is not set
-+CONFIG_HZ_100=y
-+# CONFIG_HZ_250 is not set
-+# CONFIG_HZ_300 is not set
-+# CONFIG_HZ_1000 is not set
-+CONFIG_HZ=100
-+CONFIG_KEXEC=y
-+CONFIG_PHYSICAL_START=0x400000
-+# CONFIG_RELOCATABLE is not set
-+CONFIG_PHYSICAL_ALIGN=0x100000
-+# CONFIG_COMPAT_VDSO is not set
-+
-+#
-+# Power management options (ACPI, APM)
-+#
-+CONFIG_PM=y
-+CONFIG_PM_LEGACY=y
-+CONFIG_PM_DEBUG=y
-+# CONFIG_DISABLE_CONSOLE_SUSPEND is not set
-+CONFIG_DISABLE_SUSPEND_VT_SWITCH=y
-+# CONFIG_PM_TRACE is not set
-+# CONFIG_PM_SYSFS_DEPRECATED is not set
-+CONFIG_SOFTWARE_SUSPEND=y
-+CONFIG_PM_STD_PARTITION=""
-+
-+#
-+# ACPI (Advanced Configuration and Power Interface) Support
-+#
-+# CONFIG_ACPI is not set
-+# CONFIG_APM is not set
-+
-+#
-+# CPU Frequency scaling
-+#
-+# CONFIG_CPU_FREQ is not set
-+
-+#
-+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-+#
-+CONFIG_PCI=y
-+# CONFIG_PCI_GOBIOS is not set
-+# CONFIG_PCI_GOMMCONFIG is not set
-+# CONFIG_PCI_GODIRECT is not set
-+# CONFIG_PCI_GOANY is not set
-+CONFIG_PCI_GOOLPC=y
-+CONFIG_PCI_DIRECT=y
-+CONFIG_PCI_OLPC=y
-+# CONFIG_PCIEPORTBUS is not set
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCI_DEBUG is not set
-+CONFIG_ISA_DMA_API=y
-+# CONFIG_ISA is not set
-+# CONFIG_MCA is not set
-+# CONFIG_SCx200 is not set
-+CONFIG_GEODE_MFGPT_TIMER=y
-+CONFIG_OLPC=y
-+CONFIG_OLPC_PM=y
-+CONFIG_OPEN_FIRMWARE=y
-+
-+#
-+# PCCARD (PCMCIA/CardBus) support
-+#
-+# CONFIG_PCCARD is not set
-+# CONFIG_HOTPLUG_PCI is not set
-+
-+#
-+# Executable file formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+CONFIG_BINFMT_MISC=y
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=y
-+# CONFIG_XFRM_SUB_POLICY is not set
-+CONFIG_XFRM_MIGRATE=y
-+CONFIG_NET_KEY=m
-+CONFIG_NET_KEY_MIGRATE=y
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_MULTIPLE_TABLES=y
-+CONFIG_IP_ROUTE_MULTIPATH=y
-+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-+CONFIG_IP_ROUTE_VERBOSE=y
-+# CONFIG_IP_PNP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_IP_MROUTE is not set
-+# CONFIG_ARPD is not set
-+CONFIG_SYN_COOKIES=y
-+CONFIG_INET_AH=m
-+CONFIG_INET_ESP=m
-+CONFIG_INET_IPCOMP=m
-+CONFIG_INET_XFRM_TUNNEL=m
-+CONFIG_INET_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+# CONFIG_INET_DIAG is not set
-+CONFIG_TCP_CONG_ADVANCED=y
-+CONFIG_TCP_CONG_BIC=y
-+CONFIG_TCP_CONG_CUBIC=m
-+CONFIG_TCP_CONG_WESTWOOD=m
-+CONFIG_TCP_CONG_HTCP=m
-+CONFIG_TCP_CONG_HSTCP=m
-+CONFIG_TCP_CONG_HYBLA=m
-+CONFIG_TCP_CONG_VEGAS=m
-+CONFIG_TCP_CONG_SCALABLE=m
-+CONFIG_TCP_CONG_LP=m
-+CONFIG_TCP_CONG_VENO=m
-+CONFIG_TCP_CONG_YEAH=m
-+CONFIG_TCP_CONG_ILLINOIS=m
-+CONFIG_DEFAULT_BIC=y
-+# CONFIG_DEFAULT_CUBIC is not set
-+# CONFIG_DEFAULT_HTCP is not set
-+# CONFIG_DEFAULT_VEGAS is not set
-+# CONFIG_DEFAULT_WESTWOOD is not set
-+# CONFIG_DEFAULT_RENO is not set
-+CONFIG_DEFAULT_TCP_CONG="bic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IP_VS is not set
-+CONFIG_IPV6=m
-+CONFIG_IPV6_PRIVACY=y
-+CONFIG_IPV6_ROUTER_PREF=y
-+CONFIG_IPV6_ROUTE_INFO=y
-+CONFIG_IPV6_OPTIMISTIC_DAD=y
-+CONFIG_INET6_AH=m
-+CONFIG_INET6_ESP=m
-+CONFIG_INET6_IPCOMP=m
-+CONFIG_IPV6_MIP6=y
-+CONFIG_INET6_XFRM_TUNNEL=m
-+CONFIG_INET6_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET6_XFRM_MODE_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_BEET=m
-+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-+CONFIG_IPV6_SIT=m
-+CONFIG_IPV6_TUNNEL=m
-+CONFIG_IPV6_MULTIPLE_TABLES=y
-+CONFIG_IPV6_SUBTREES=y
-+# CONFIG_NETLABEL is not set
-+CONFIG_NETWORK_SECMARK=y
-+CONFIG_NETFILTER=y
-+# CONFIG_NETFILTER_DEBUG is not set
-+
-+#
-+# Core Netfilter Configuration
-+#
-+CONFIG_NETFILTER_NETLINK=m
-+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-+# CONFIG_NETFILTER_NETLINK_LOG is not set
-+CONFIG_NF_CONNTRACK_ENABLED=m
-+CONFIG_NF_CONNTRACK=m
-+# CONFIG_NF_CT_ACCT is not set
-+# CONFIG_NF_CONNTRACK_MARK is not set
-+# CONFIG_NF_CONNTRACK_SECMARK is not set
-+# CONFIG_NF_CONNTRACK_EVENTS is not set
-+# CONFIG_NF_CT_PROTO_SCTP is not set
-+# CONFIG_NF_CONNTRACK_AMANDA is not set
-+CONFIG_NF_CONNTRACK_FTP=m
-+# CONFIG_NF_CONNTRACK_H323 is not set
-+CONFIG_NF_CONNTRACK_IRC=m
-+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-+# CONFIG_NF_CONNTRACK_PPTP is not set
-+# CONFIG_NF_CONNTRACK_SANE is not set
-+# CONFIG_NF_CONNTRACK_SIP is not set
-+# CONFIG_NF_CONNTRACK_TFTP is not set
-+# CONFIG_NF_CT_NETLINK is not set
-+CONFIG_NETFILTER_XTABLES=m
-+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-+# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
-+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-+CONFIG_NETFILTER_XT_MATCH_STATE=m
-+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-+
-+#
-+# IP: Netfilter Configuration
-+#
-+CONFIG_NF_CONNTRACK_IPV4=m
-+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-+# CONFIG_IP_NF_QUEUE is not set
-+CONFIG_IP_NF_IPTABLES=m
-+# CONFIG_IP_NF_MATCH_IPRANGE is not set
-+# CONFIG_IP_NF_MATCH_TOS is not set
-+# CONFIG_IP_NF_MATCH_RECENT is not set
-+# CONFIG_IP_NF_MATCH_ECN is not set
-+# CONFIG_IP_NF_MATCH_AH is not set
-+# CONFIG_IP_NF_MATCH_TTL is not set
-+# CONFIG_IP_NF_MATCH_OWNER is not set
-+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-+CONFIG_IP_NF_FILTER=m
-+# CONFIG_IP_NF_TARGET_REJECT is not set
-+CONFIG_IP_NF_TARGET_LOG=m
-+# CONFIG_IP_NF_TARGET_ULOG is not set
-+CONFIG_NF_NAT=m
-+CONFIG_NF_NAT_NEEDED=y
-+CONFIG_IP_NF_TARGET_MASQUERADE=m
-+# CONFIG_IP_NF_TARGET_REDIRECT is not set
-+# CONFIG_IP_NF_TARGET_NETMAP is not set
-+# CONFIG_IP_NF_TARGET_SAME is not set
-+# CONFIG_NF_NAT_SNMP_BASIC is not set
-+CONFIG_NF_NAT_FTP=m
-+CONFIG_NF_NAT_IRC=m
-+# CONFIG_NF_NAT_TFTP is not set
-+# CONFIG_NF_NAT_AMANDA is not set
-+# CONFIG_NF_NAT_PPTP is not set
-+# CONFIG_NF_NAT_H323 is not set
-+# CONFIG_NF_NAT_SIP is not set
-+# CONFIG_IP_NF_MANGLE is not set
-+# CONFIG_IP_NF_RAW is not set
-+# CONFIG_IP_NF_ARPTABLES is not set
-+
-+#
-+# IPv6: Netfilter Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_NF_CONNTRACK_IPV6 is not set
-+# CONFIG_IP6_NF_QUEUE is not set
-+# CONFIG_IP6_NF_IPTABLES is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+CONFIG_NET_SCHED=y
-+CONFIG_NET_SCH_FIFO=y
-+
-+#
-+# Queueing/Scheduling
-+#
-+CONFIG_NET_SCH_CBQ=m
-+CONFIG_NET_SCH_HTB=m
-+CONFIG_NET_SCH_HFSC=m
-+CONFIG_NET_SCH_PRIO=m
-+CONFIG_NET_SCH_RED=m
-+CONFIG_NET_SCH_SFQ=m
-+CONFIG_NET_SCH_TEQL=m
-+CONFIG_NET_SCH_TBF=m
-+CONFIG_NET_SCH_GRED=m
-+CONFIG_NET_SCH_DSMARK=m
-+CONFIG_NET_SCH_NETEM=m
-+CONFIG_NET_SCH_INGRESS=m
-+
-+#
-+# Classification
-+#
-+CONFIG_NET_CLS=y
-+CONFIG_NET_CLS_BASIC=m
-+CONFIG_NET_CLS_TCINDEX=m
-+CONFIG_NET_CLS_ROUTE4=m
-+CONFIG_NET_CLS_ROUTE=y
-+CONFIG_NET_CLS_FW=m
-+CONFIG_NET_CLS_U32=m
-+CONFIG_CLS_U32_PERF=y
-+CONFIG_CLS_U32_MARK=y
-+CONFIG_NET_CLS_RSVP=m
-+CONFIG_NET_CLS_RSVP6=m
-+CONFIG_NET_EMATCH=y
-+CONFIG_NET_EMATCH_STACK=32
-+CONFIG_NET_EMATCH_CMP=m
-+CONFIG_NET_EMATCH_NBYTE=m
-+CONFIG_NET_EMATCH_U32=m
-+CONFIG_NET_EMATCH_META=m
-+CONFIG_NET_EMATCH_TEXT=m
-+CONFIG_NET_CLS_ACT=y
-+CONFIG_NET_ACT_POLICE=m
-+CONFIG_NET_ACT_GACT=m
-+CONFIG_GACT_PROB=y
-+CONFIG_NET_ACT_MIRRED=m
-+# CONFIG_NET_ACT_IPT is not set
-+CONFIG_NET_ACT_PEDIT=m
-+CONFIG_NET_ACT_SIMP=m
-+CONFIG_NET_CLS_IND=y
-+CONFIG_NET_ESTIMATOR=y
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_NET_TCPPROBE is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+CONFIG_FIB_RULES=y
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+CONFIG_WIRELESS_EXT=y
-+# CONFIG_MAC80211 is not set
-+CONFIG_IEEE80211=m
-+# CONFIG_IEEE80211_DEBUG is not set
-+CONFIG_IEEE80211_CRYPT_WEP=m
-+CONFIG_IEEE80211_CRYPT_CCMP=m
-+CONFIG_IEEE80211_CRYPT_TKIP=m
-+CONFIG_IEEE80211_SOFTMAC=m
-+CONFIG_IEEE80211_SOFTMAC_DEBUG=y
-+# CONFIG_RFKILL is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+
-+#
-+# Connector - unified userspace <-> kernelspace linker
-+#
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+CONFIG_MTD_CONCAT=m
-+CONFIG_MTD_PARTITIONS=y
-+CONFIG_MTD_REDBOOT_PARTS=m
-+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=m
-+CONFIG_MTD_BLKDEVS=m
-+CONFIG_MTD_BLOCK=m
-+CONFIG_MTD_BLOCK_RO=m
-+CONFIG_FTL=m
-+CONFIG_NFTL=m
-+CONFIG_NFTL_RW=y
-+CONFIG_INFTL=m
-+CONFIG_RFD_FTL=m
-+# CONFIG_SSFDC is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=m
-+CONFIG_MTD_JEDECPROBE=m
-+CONFIG_MTD_GEN_PROBE=m
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+CONFIG_MTD_CFI_INTELEXT=m
-+CONFIG_MTD_CFI_AMDSTD=m
-+CONFIG_MTD_CFI_STAA=m
-+CONFIG_MTD_CFI_UTIL=m
-+CONFIG_MTD_RAM=m
-+CONFIG_MTD_ROM=m
-+CONFIG_MTD_ABSENT=m
-+
-+#
-+# Mapping drivers for chip access
-+#
-+CONFIG_MTD_COMPLEX_MAPPINGS=y
-+# CONFIG_MTD_PHYSMAP is not set
-+# CONFIG_MTD_PNC2000 is not set
-+CONFIG_MTD_SC520CDP=m
-+CONFIG_MTD_NETSC520=m
-+CONFIG_MTD_TS5500=m
-+# CONFIG_MTD_SBC_GXX is not set
-+# CONFIG_MTD_AMD76XROM is not set
-+# CONFIG_MTD_ICHXROM is not set
-+# CONFIG_MTD_ESB2ROM is not set
-+# CONFIG_MTD_CK804XROM is not set
-+CONFIG_MTD_SCB2_FLASH=m
-+# CONFIG_MTD_NETtel is not set
-+# CONFIG_MTD_DILNETPC is not set
-+# CONFIG_MTD_L440GX is not set
-+CONFIG_MTD_PCI=m
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_PMC551=m
-+# CONFIG_MTD_PMC551_BUGFIX is not set
-+# CONFIG_MTD_PMC551_DEBUG is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+CONFIG_MTD_MTDRAM=m
-+CONFIG_MTDRAM_TOTAL_SIZE=4096
-+CONFIG_MTDRAM_ERASE_SIZE=128
-+CONFIG_MTD_BLOCK2MTD=m
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND=y
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-+CONFIG_MTD_NAND_IDS=y
-+CONFIG_MTD_NAND_DISKONCHIP=m
-+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
-+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
-+CONFIG_MTD_NAND_CAFE=y
-+CONFIG_MTD_NAND_CS553X=y
-+CONFIG_MTD_NAND_NANDSIM=m
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+
-+#
-+# Parallel port support
-+#
-+# CONFIG_PARPORT is not set
-+
-+#
-+# Plug and Play support
-+#
-+# CONFIG_PNPACPI is not set
-+
-+#
-+# Block devices
-+#
-+# CONFIG_BLK_DEV_FD is not set
-+# CONFIG_BLK_CPQ_DA is not set
-+# CONFIG_BLK_CPQ_CISS_DA is not set
-+# CONFIG_BLK_DEV_DAC960 is not set
-+# CONFIG_BLK_DEV_UMEM is not set
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=m
-+CONFIG_BLK_DEV_CRYPTOLOOP=m
-+CONFIG_BLK_DEV_NBD=m
-+# CONFIG_BLK_DEV_SX8 is not set
-+CONFIG_BLK_DEV_UB=m
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=16384
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+
-+#
-+# Misc devices
-+#
-+# CONFIG_IBM_ASM is not set
-+# CONFIG_PHANTOM is not set
-+# CONFIG_SGI_IOC4 is not set
-+# CONFIG_TIFM_CORE is not set
-+# CONFIG_BLINK is not set
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_IDE=m
-+CONFIG_IDE_MAX_HWIFS=4
-+CONFIG_BLK_DEV_IDE=m
-+
-+#
-+# Please see Documentation/ide.txt for help/info on IDE drives
-+#
-+# CONFIG_BLK_DEV_IDE_SATA is not set
-+# CONFIG_BLK_DEV_HD_IDE is not set
-+CONFIG_BLK_DEV_IDEDISK=m
-+CONFIG_IDEDISK_MULTI_MODE=y
-+# CONFIG_BLK_DEV_IDECD is not set
-+# CONFIG_BLK_DEV_IDETAPE is not set
-+# CONFIG_BLK_DEV_IDEFLOPPY is not set
-+# CONFIG_BLK_DEV_IDESCSI is not set
-+CONFIG_IDE_TASK_IOCTL=y
-+# CONFIG_IDE_PROC_FS is not set
-+
-+#
-+# IDE chipset support/bugfixes
-+#
-+CONFIG_IDE_GENERIC=m
-+# CONFIG_BLK_DEV_CMD640 is not set
-+CONFIG_BLK_DEV_IDEPCI=y
-+CONFIG_IDEPCI_SHARE_IRQ=y
-+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-+# CONFIG_BLK_DEV_OFFBOARD is not set
-+# CONFIG_BLK_DEV_GENERIC is not set
-+# CONFIG_BLK_DEV_OPTI621 is not set
-+# CONFIG_BLK_DEV_RZ1000 is not set
-+CONFIG_BLK_DEV_IDEDMA_PCI=y
-+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-+CONFIG_IDEDMA_ONLYDISK=y
-+# CONFIG_BLK_DEV_AEC62XX is not set
-+# CONFIG_BLK_DEV_ALI15X3 is not set
-+# CONFIG_BLK_DEV_AMD74XX is not set
-+# CONFIG_BLK_DEV_ATIIXP is not set
-+# CONFIG_BLK_DEV_CMD64X is not set
-+# CONFIG_BLK_DEV_TRIFLEX is not set
-+# CONFIG_BLK_DEV_CY82C693 is not set
-+# CONFIG_BLK_DEV_CS5520 is not set
-+# CONFIG_BLK_DEV_CS5530 is not set
-+# CONFIG_BLK_DEV_CS5535 is not set
-+# CONFIG_BLK_DEV_HPT34X is not set
-+# CONFIG_BLK_DEV_HPT366 is not set
-+# CONFIG_BLK_DEV_JMICRON is not set
-+# CONFIG_BLK_DEV_SC1200 is not set
-+CONFIG_BLK_DEV_PIIX=m
-+# CONFIG_BLK_DEV_IT8213 is not set
-+# CONFIG_BLK_DEV_IT821X is not set
-+# CONFIG_BLK_DEV_NS87415 is not set
-+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-+# CONFIG_BLK_DEV_SVWKS is not set
-+# CONFIG_BLK_DEV_SIIMAGE is not set
-+# CONFIG_BLK_DEV_SIS5513 is not set
-+# CONFIG_BLK_DEV_SLC90E66 is not set
-+# CONFIG_BLK_DEV_TRM290 is not set
-+# CONFIG_BLK_DEV_VIA82CXXX is not set
-+# CONFIG_BLK_DEV_TC86C001 is not set
-+# CONFIG_IDE_ARM is not set
-+CONFIG_BLK_DEV_IDEDMA=y
-+# CONFIG_IDEDMA_IVB is not set
-+# CONFIG_BLK_DEV_HD is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+CONFIG_BLK_DEV_SR=m
-+CONFIG_BLK_DEV_SR_VENDOR=y
-+CONFIG_CHR_DEV_SG=m
-+CONFIG_CHR_DEV_SCH=m
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+CONFIG_SCSI_CONSTANTS=y
-+CONFIG_SCSI_LOGGING=y
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+
-+#
-+# SCSI low-level drivers
-+#
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-+# CONFIG_SCSI_3W_9XXX is not set
-+# CONFIG_SCSI_ACARD is not set
-+# CONFIG_SCSI_AACRAID is not set
-+# CONFIG_SCSI_AIC7XXX is not set
-+# CONFIG_SCSI_AIC7XXX_OLD is not set
-+# CONFIG_SCSI_AIC79XX is not set
-+# CONFIG_SCSI_AIC94XX is not set
-+# CONFIG_SCSI_DPT_I2O is not set
-+# CONFIG_SCSI_ADVANSYS is not set
-+# CONFIG_SCSI_ARCMSR is not set
-+# CONFIG_MEGARAID_NEWGEN is not set
-+# CONFIG_MEGARAID_LEGACY is not set
-+# CONFIG_MEGARAID_SAS is not set
-+# CONFIG_SCSI_HPTIOP is not set
-+# CONFIG_SCSI_BUSLOGIC is not set
-+# CONFIG_SCSI_DMX3191D is not set
-+# CONFIG_SCSI_EATA is not set
-+# CONFIG_SCSI_FUTURE_DOMAIN is not set
-+# CONFIG_SCSI_GDTH is not set
-+# CONFIG_SCSI_IPS is not set
-+# CONFIG_SCSI_INITIO is not set
-+# CONFIG_SCSI_INIA100 is not set
-+# CONFIG_SCSI_STEX is not set
-+# CONFIG_SCSI_SYM53C8XX_2 is not set
-+# CONFIG_SCSI_QLOGIC_1280 is not set
-+# CONFIG_SCSI_QLA_FC is not set
-+# CONFIG_SCSI_QLA_ISCSI is not set
-+# CONFIG_SCSI_LPFC is not set
-+# CONFIG_SCSI_DC395x is not set
-+# CONFIG_SCSI_DC390T is not set
-+# CONFIG_SCSI_NSP32 is not set
-+# CONFIG_SCSI_DEBUG is not set
-+# CONFIG_SCSI_SRP is not set
-+# CONFIG_ATA is not set
-+
-+#
-+# Multi-device support (RAID and LVM)
-+#
-+# CONFIG_MD is not set
-+
-+#
-+# Fusion MPT device support
-+#
-+# CONFIG_FUSION is not set
-+# CONFIG_FUSION_SPI is not set
-+# CONFIG_FUSION_FC is not set
-+# CONFIG_FUSION_SAS is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+# CONFIG_FIREWIRE is not set
-+# CONFIG_IEEE1394 is not set
-+
-+#
-+# I2O device support
-+#
-+# CONFIG_I2O is not set
-+
-+#
-+# Battery support
-+#
-+# CONFIG_BATTERY_CLASS is not set
-+# CONFIG_MACINTOSH_DRIVERS is not set
-+
-+#
-+# Network device support
-+#
-+CONFIG_NETDEVICES=y
-+CONFIG_IFB=m
-+CONFIG_DUMMY=m
-+# CONFIG_BONDING is not set
-+# CONFIG_EQUALIZER is not set
-+CONFIG_TUN=m
-+# CONFIG_ARCNET is not set
-+# CONFIG_PHYLIB is not set
-+
-+#
-+# Ethernet (10 or 100Mbit)
-+#
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=m
-+# CONFIG_HAPPYMEAL is not set
-+# CONFIG_SUNGEM is not set
-+# CONFIG_CASSINI is not set
-+# CONFIG_NET_VENDOR_3COM is not set
-+
-+#
-+# Tulip family network device support
-+#
-+# CONFIG_NET_TULIP is not set
-+# CONFIG_HP100 is not set
-+CONFIG_NET_PCI=y
-+# CONFIG_PCNET32 is not set
-+# CONFIG_AMD8111_ETH is not set
-+# CONFIG_ADAPTEC_STARFIRE is not set
-+# CONFIG_B44 is not set
-+# CONFIG_FORCEDETH is not set
-+# CONFIG_DGRS is not set
-+# CONFIG_EEPRO100 is not set
-+# CONFIG_E100 is not set
-+# CONFIG_FEALNX is not set
-+# CONFIG_NATSEMI is not set
-+CONFIG_NE2K_PCI=m
-+# CONFIG_8139CP is not set
-+# CONFIG_8139TOO is not set
-+# CONFIG_SIS900 is not set
-+# CONFIG_EPIC100 is not set
-+# CONFIG_SUNDANCE is not set
-+# CONFIG_TLAN is not set
-+# CONFIG_VIA_RHINE is not set
-+# CONFIG_SC92031 is not set
-+CONFIG_NETDEV_1000=y
-+# CONFIG_ACENIC is not set
-+# CONFIG_DL2K is not set
-+# CONFIG_E1000 is not set
-+# CONFIG_NS83820 is not set
-+# CONFIG_HAMACHI is not set
-+# CONFIG_YELLOWFIN is not set
-+# CONFIG_R8169 is not set
-+# CONFIG_SIS190 is not set
-+# CONFIG_SKGE is not set
-+# CONFIG_SKY2 is not set
-+# CONFIG_SK98LIN is not set
-+# CONFIG_VIA_VELOCITY is not set
-+# CONFIG_TIGON3 is not set
-+# CONFIG_BNX2 is not set
-+# CONFIG_QLA3XXX is not set
-+# CONFIG_ATL1 is not set
-+CONFIG_NETDEV_10000=y
-+# CONFIG_CHELSIO_T1 is not set
-+# CONFIG_CHELSIO_T3 is not set
-+# CONFIG_IXGB is not set
-+# CONFIG_S2IO is not set
-+# CONFIG_MYRI10GE is not set
-+# CONFIG_NETXEN_NIC is not set
-+# CONFIG_MLX4_CORE is not set
-+# CONFIG_TR is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+CONFIG_WLAN_80211=y
-+# CONFIG_IPW2100 is not set
-+# CONFIG_IPW2200 is not set
-+CONFIG_LIBERTAS=m
-+CONFIG_LIBERTAS_USB=m
-+CONFIG_LIBERTAS_DEBUG=y
-+# CONFIG_AIRO is not set
-+# CONFIG_HERMES is not set
-+# CONFIG_ATMEL is not set
-+# CONFIG_PRISM54 is not set
-+# CONFIG_USB_ZD1201 is not set
-+# CONFIG_PRISM54_USB is not set
-+# CONFIG_HOSTAP is not set
-+# CONFIG_BCM43XX is not set
-+# CONFIG_ZD1211RW is not set
-+# CONFIG_ADM8211 is not set
-+# CONFIG_ACX_PCI is not set
-+# CONFIG_ACX_USB is not set
-+
-+#
-+# USB Network Adapters
-+#
-+CONFIG_USB_CATC=m
-+CONFIG_USB_KAWETH=m
-+CONFIG_USB_PEGASUS=m
-+CONFIG_USB_RTL8150=m
-+CONFIG_USB_USBNET_MII=m
-+CONFIG_USB_USBNET=m
-+CONFIG_USB_NET_AX8817X=m
-+CONFIG_USB_NET_CDCETHER=m
-+CONFIG_USB_NET_DM9601=m
-+CONFIG_USB_NET_GL620A=m
-+CONFIG_USB_NET_NET1080=m
-+CONFIG_USB_NET_PLUSB=m
-+CONFIG_USB_NET_MCS7830=m
-+CONFIG_USB_NET_RNDIS_HOST=m
-+CONFIG_USB_NET_CDC_SUBSET=m
-+CONFIG_USB_ALI_M5632=y
-+CONFIG_USB_AN2720=y
-+CONFIG_USB_BELKIN=y
-+CONFIG_USB_ARMLINUX=y
-+CONFIG_USB_EPSON2888=y
-+# CONFIG_USB_KC2190 is not set
-+CONFIG_USB_NET_ZAURUS=m
-+# CONFIG_WAN is not set
-+# CONFIG_FDDI is not set
-+# CONFIG_HIPPI is not set
-+CONFIG_PPP=m
-+CONFIG_PPP_MULTILINK=y
-+CONFIG_PPP_FILTER=y
-+CONFIG_PPP_ASYNC=m
-+CONFIG_PPP_SYNC_TTY=m
-+CONFIG_PPP_DEFLATE=m
-+# CONFIG_PPP_BSDCOMP is not set
-+CONFIG_PPP_MPPE=m
-+CONFIG_PPPOE=m
-+CONFIG_SLIP=m
-+CONFIG_SLIP_COMPRESSED=y
-+CONFIG_SLHC=m
-+CONFIG_SLIP_SMART=y
-+# CONFIG_SLIP_MODE_SLIP6 is not set
-+# CONFIG_NET_FC is not set
-+# CONFIG_SHAPER is not set
-+CONFIG_NETCONSOLE=m
-+CONFIG_NETPOLL=y
-+CONFIG_NETPOLL_TRAP=y
-+CONFIG_NET_POLL_CONTROLLER=y
-+
-+#
-+# ISDN subsystem
-+#
-+# CONFIG_ISDN is not set
-+
-+#
-+# Telephony Support
-+#
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=m
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+CONFIG_INPUT_JOYDEV=m
-+# CONFIG_INPUT_TSDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+CONFIG_KEYBOARD_ATKBD=y
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_INPUT_MOUSE=y
-+CONFIG_MOUSE_PS2=m
-+# CONFIG_MOUSE_PS2_ALPS is not set
-+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
-+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
-+# CONFIG_MOUSE_PS2_LIFEBOOK is not set
-+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
-+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-+CONFIG_MOUSE_PS2_OLPC=y
-+# CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_APPLETOUCH is not set
-+# CONFIG_MOUSE_VSXXXAA is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+CONFIG_INPUT_MISC=y
-+CONFIG_INPUT_PCSPKR=m
-+# CONFIG_INPUT_WISTRON_BTNS is not set
-+# CONFIG_INPUT_ATI_REMOTE is not set
-+# CONFIG_INPUT_ATI_REMOTE2 is not set
-+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-+# CONFIG_INPUT_POWERMATE is not set
-+# CONFIG_INPUT_YEALINK is not set
-+CONFIG_INPUT_UINPUT=m
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=y
-+CONFIG_SERIO_I8042=y
-+CONFIG_SERIO_SERPORT=y
-+# CONFIG_SERIO_CT82C710 is not set
-+# CONFIG_SERIO_PCIPS2 is not set
-+CONFIG_SERIO_LIBPS2=y
-+CONFIG_SERIO_RAW=m
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+CONFIG_SERIAL_8250=y
-+CONFIG_SERIAL_8250_CONSOLE=y
-+CONFIG_SERIAL_8250_PCI=y
-+CONFIG_SERIAL_8250_NR_UARTS=1
-+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-+CONFIG_SERIAL_8250_EXTENDED=y
-+CONFIG_SERIAL_8250_MANY_PORTS=y
-+CONFIG_SERIAL_8250_SHARE_IRQ=y
-+CONFIG_SERIAL_8250_DETECT_IRQ=y
-+CONFIG_SERIAL_8250_RSA=y
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+# CONFIG_SERIAL_JSM is not set
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+
-+#
-+# IPMI
-+#
-+# CONFIG_IPMI_HANDLER is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+CONFIG_SOFT_WATCHDOG=m
-+# CONFIG_ACQUIRE_WDT is not set
-+# CONFIG_ADVANTECH_WDT is not set
-+# CONFIG_ALIM1535_WDT is not set
-+# CONFIG_ALIM7101_WDT is not set
-+# CONFIG_SC520_WDT is not set
-+# CONFIG_EUROTECH_WDT is not set
-+# CONFIG_IB700_WDT is not set
-+# CONFIG_IBMASR is not set
-+# CONFIG_WAFER_WDT is not set
-+# CONFIG_I6300ESB_WDT is not set
-+# CONFIG_ITCO_WDT is not set
-+# CONFIG_SC1200_WDT is not set
-+# CONFIG_PC87413_WDT is not set
-+# CONFIG_60XX_WDT is not set
-+# CONFIG_SBC8360_WDT is not set
-+# CONFIG_CPU5_WDT is not set
-+# CONFIG_SMSC37B787_WDT is not set
-+# CONFIG_W83627HF_WDT is not set
-+# CONFIG_W83697HF_WDT is not set
-+# CONFIG_W83877F_WDT is not set
-+# CONFIG_W83977F_WDT is not set
-+# CONFIG_MACHZ_WDT is not set
-+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
-+
-+#
-+# PCI-based Watchdog Cards
-+#
-+# CONFIG_PCIPCWATCHDOG is not set
-+# CONFIG_WDTPCI is not set
-+
-+#
-+# USB-based Watchdog Cards
-+#
-+# CONFIG_USBPCWATCHDOG is not set
-+CONFIG_HW_RANDOM=y
-+# CONFIG_HW_RANDOM_INTEL is not set
-+# CONFIG_HW_RANDOM_AMD is not set
-+CONFIG_HW_RANDOM_GEODE=y
-+# CONFIG_HW_RANDOM_VIA is not set
-+CONFIG_NVRAM=y
-+# CONFIG_RTC is not set
-+# CONFIG_GEN_RTC is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_APPLICOM is not set
-+# CONFIG_SONYPI is not set
-+# CONFIG_AGP is not set
-+# CONFIG_DRM is not set
-+# CONFIG_MWAVE is not set
-+# CONFIG_PC8736x_GPIO is not set
-+# CONFIG_NSC_GPIO is not set
-+CONFIG_CS5535_GPIO=m
-+# CONFIG_RAW_DRIVER is not set
-+CONFIG_HANGCHECK_TIMER=m
-+
-+#
-+# TPM devices
-+#
-+# CONFIG_TCG_TPM is not set
-+# CONFIG_TELCLOCK is not set
-+CONFIG_DEVPORT=y
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
-+
-+#
-+# I2C Algorithms
-+#
-+# CONFIG_I2C_ALGOBIT is not set
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+# CONFIG_I2C_ALI1535 is not set
-+# CONFIG_I2C_ALI1563 is not set
-+# CONFIG_I2C_ALI15X3 is not set
-+# CONFIG_I2C_AMD756 is not set
-+# CONFIG_I2C_AMD8111 is not set
-+# CONFIG_I2C_I801 is not set
-+# CONFIG_I2C_I810 is not set
-+# CONFIG_I2C_PIIX4 is not set
-+# CONFIG_I2C_NFORCE2 is not set
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_PROSAVAGE is not set
-+# CONFIG_I2C_SAVAGE4 is not set
-+# CONFIG_I2C_SIMTEC is not set
-+CONFIG_SCx200_ACB=y
-+# CONFIG_I2C_SIS5595 is not set
-+# CONFIG_I2C_SIS630 is not set
-+# CONFIG_I2C_SIS96X is not set
-+# CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_TINY_USB is not set
-+# CONFIG_I2C_VIA is not set
-+# CONFIG_I2C_VIAPRO is not set
-+# CONFIG_I2C_VOODOO3 is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+
-+#
-+# SPI support
-+#
-+# CONFIG_SPI is not set
-+# CONFIG_SPI_MASTER is not set
-+
-+#
-+# Dallas's 1-wire bus
-+#
-+# CONFIG_W1 is not set
-+CONFIG_POWER_SUPPLY=m
-+# CONFIG_POWER_SUPPLY_DEBUG is not set
-+# CONFIG_PDA_POWER is not set
-+# CONFIG_BATTERY_DS2760 is not set
-+CONFIG_BATTERY_OLPC=m
-+# CONFIG_HWMON is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# Multimedia devices
-+#
-+CONFIG_VIDEO_DEV=m
-+# CONFIG_VIDEO_V4L1 is not set
-+CONFIG_VIDEO_V4L1_COMPAT=y
-+CONFIG_VIDEO_V4L2=y
-+CONFIG_VIDEO_CAPTURE_DRIVERS=y
-+# CONFIG_VIDEO_ADV_DEBUG is not set
-+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-+
-+#
-+# Encoders/decoders and other helper chips
-+#
-+
-+#
-+# Audio decoders
-+#
-+# CONFIG_VIDEO_TDA9840 is not set
-+# CONFIG_VIDEO_TEA6415C is not set
-+# CONFIG_VIDEO_TEA6420 is not set
-+# CONFIG_VIDEO_MSP3400 is not set
-+# CONFIG_VIDEO_CS53L32A is not set
-+# CONFIG_VIDEO_TLV320AIC23B is not set
-+# CONFIG_VIDEO_WM8775 is not set
-+# CONFIG_VIDEO_WM8739 is not set
-+
-+#
-+# Video decoders
-+#
-+CONFIG_VIDEO_OV7670=m
-+# CONFIG_VIDEO_SAA711X is not set
-+# CONFIG_VIDEO_TVP5150 is not set
-+
-+#
-+# Video and audio decoders
-+#
-+# CONFIG_VIDEO_CX25840 is not set
-+
-+#
-+# MPEG video encoders
-+#
-+# CONFIG_VIDEO_CX2341X is not set
-+
-+#
-+# Video encoders
-+#
-+# CONFIG_VIDEO_SAA7127 is not set
-+
-+#
-+# Video improvement chips
-+#
-+# CONFIG_VIDEO_UPD64031A is not set
-+# CONFIG_VIDEO_UPD64083 is not set
-+# CONFIG_VIDEO_VIVI is not set
-+# CONFIG_VIDEO_SAA5246A is not set
-+# CONFIG_VIDEO_SAA5249 is not set
-+# CONFIG_VIDEO_SAA7134 is not set
-+# CONFIG_VIDEO_HEXIUM_ORION is not set
-+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-+# CONFIG_VIDEO_CX88 is not set
-+CONFIG_VIDEO_CAFE_CCIC=m
-+CONFIG_V4L_USB_DRIVERS=y
-+# CONFIG_VIDEO_PVRUSB2 is not set
-+# CONFIG_VIDEO_USBVISION is not set
-+# CONFIG_USB_SN9C102 is not set
-+# CONFIG_USB_ZR364XX is not set
-+CONFIG_RADIO_ADAPTERS=y
-+# CONFIG_RADIO_GEMTEK_PCI is not set
-+# CONFIG_RADIO_MAXIRADIO is not set
-+# CONFIG_RADIO_MAESTRO is not set
-+# CONFIG_USB_DSBR is not set
-+# CONFIG_DVB_CORE is not set
-+CONFIG_DAB=y
-+# CONFIG_USB_DABUSB is not set
-+
-+#
-+# Graphics support
-+#
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_BACKLIGHT_CLASS_DEVICE=y
-+CONFIG_LCD_CLASS_DEVICE=y
-+# CONFIG_BACKLIGHT_PROGEAR is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+CONFIG_VGASTATE=m
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+CONFIG_FB_DEFERRED_IO=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+CONFIG_FB_MODE_HELPERS=y
-+CONFIG_FB_TILEBLITTING=y
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_CIRRUS is not set
-+# CONFIG_FB_PM2 is not set
-+# CONFIG_FB_CYBER2000 is not set
-+# CONFIG_FB_ARC is not set
-+# CONFIG_FB_ASILIANT is not set
-+# CONFIG_FB_IMSTT is not set
-+CONFIG_FB_VGA16=m
-+CONFIG_FB_VESA=y
-+# CONFIG_FB_HECUBA is not set
-+# CONFIG_FB_HGA is not set
-+# CONFIG_FB_S1D13XXX is not set
-+# CONFIG_FB_NVIDIA is not set
-+# CONFIG_FB_RIVA is not set
-+# CONFIG_FB_I810 is not set
-+# CONFIG_FB_LE80578 is not set
-+# CONFIG_FB_INTEL is not set
-+# CONFIG_FB_MATROX is not set
-+# CONFIG_FB_RADEON is not set
-+# CONFIG_FB_ATY128 is not set
-+# CONFIG_FB_ATY is not set
-+# CONFIG_FB_S3 is not set
-+# CONFIG_FB_SAVAGE is not set
-+# CONFIG_FB_SIS is not set
-+# CONFIG_FB_NEOMAGIC is not set
-+# CONFIG_FB_KYRO is not set
-+# CONFIG_FB_3DFX is not set
-+# CONFIG_FB_VOODOO1 is not set
-+# CONFIG_FB_VT8623 is not set
-+# CONFIG_FB_CYBLA is not set
-+# CONFIG_FB_TRIDENT is not set
-+# CONFIG_FB_ARK is not set
-+# CONFIG_FB_PM3 is not set
-+CONFIG_FB_GEODE=y
-+CONFIG_FB_GEODE_LX=y
-+CONFIG_FB_GEODE_GX=y
-+# CONFIG_FB_GEODE_GX1 is not set
-+CONFIG_FB_OLPC_DCON=y
-+# CONFIG_FB_VIRTUAL is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_VGA_CONSOLE=y
-+CONFIG_VGACON_SOFT_SCROLLBACK=y
-+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-+CONFIG_VIDEO_SELECT=y
-+CONFIG_DUMMY_CONSOLE=y
-+CONFIG_FRAMEBUFFER_CONSOLE=y
-+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-+CONFIG_FONTS=y
-+# CONFIG_FONT_8x8 is not set
-+CONFIG_FONT_8x16=y
-+# CONFIG_FONT_6x11 is not set
-+# CONFIG_FONT_7x14 is not set
-+# CONFIG_FONT_PEARL_8x8 is not set
-+# CONFIG_FONT_ACORN_8x8 is not set
-+# CONFIG_FONT_MINI_4x6 is not set
-+# CONFIG_FONT_SUN8x16 is not set
-+CONFIG_FONT_SUN12x22=y
-+# CONFIG_FONT_10x18 is not set
-+CONFIG_LOGO=y
-+# CONFIG_LOGO_LINUX_MONO is not set
-+# CONFIG_LOGO_LINUX_VGA16 is not set
-+CONFIG_LOGO_LINUX_CLUT224=y
-+
-+#
-+# Sound
-+#
-+CONFIG_SOUND=m
-+
-+#
-+# Advanced Linux Sound Architecture
-+#
-+CONFIG_SND=m
-+CONFIG_SND_TIMER=m
-+CONFIG_SND_PCM=m
-+CONFIG_SND_HWDEP=m
-+CONFIG_SND_RAWMIDI=m
-+CONFIG_SND_SEQUENCER=m
-+CONFIG_SND_SEQ_DUMMY=m
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+CONFIG_SND_SEQUENCER_OSS=y
-+CONFIG_SND_DYNAMIC_MINORS=y
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+CONFIG_SND_VERBOSE_PROCFS=y
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+
-+#
-+# Generic devices
-+#
-+CONFIG_SND_MPU401_UART=m
-+CONFIG_SND_AC97_CODEC=m
-+CONFIG_SND_DUMMY=m
-+CONFIG_SND_VIRMIDI=m
-+CONFIG_SND_MTPAV=m
-+# CONFIG_SND_SERIAL_U16550 is not set
-+CONFIG_SND_MPU401=m
-+
-+#
-+# PCI devices
-+#
-+# CONFIG_SND_AD1889 is not set
-+# CONFIG_SND_ALS300 is not set
-+# CONFIG_SND_ALS4000 is not set
-+# CONFIG_SND_ALI5451 is not set
-+# CONFIG_SND_ATIIXP is not set
-+# CONFIG_SND_ATIIXP_MODEM is not set
-+# CONFIG_SND_AU8810 is not set
-+# CONFIG_SND_AU8820 is not set
-+# CONFIG_SND_AU8830 is not set
-+# CONFIG_SND_AZT3328 is not set
-+# CONFIG_SND_BT87X is not set
-+# CONFIG_SND_CA0106 is not set
-+# CONFIG_SND_CMIPCI is not set
-+# CONFIG_SND_CS4281 is not set
-+# CONFIG_SND_CS46XX is not set
-+CONFIG_SND_CS5535AUDIO=m
-+# CONFIG_SND_DARLA20 is not set
-+# CONFIG_SND_GINA20 is not set
-+# CONFIG_SND_LAYLA20 is not set
-+# CONFIG_SND_DARLA24 is not set
-+# CONFIG_SND_GINA24 is not set
-+# CONFIG_SND_LAYLA24 is not set
-+# CONFIG_SND_MONA is not set
-+# CONFIG_SND_MIA is not set
-+# CONFIG_SND_ECHO3G is not set
-+# CONFIG_SND_INDIGO is not set
-+# CONFIG_SND_INDIGOIO is not set
-+# CONFIG_SND_INDIGODJ is not set
-+# CONFIG_SND_EMU10K1 is not set
-+# CONFIG_SND_EMU10K1X is not set
-+CONFIG_SND_ENS1370=m
-+# CONFIG_SND_ENS1371 is not set
-+# CONFIG_SND_ES1938 is not set
-+# CONFIG_SND_ES1968 is not set
-+# CONFIG_SND_FM801 is not set
-+# CONFIG_SND_HDA_INTEL is not set
-+# CONFIG_SND_HDSP is not set
-+# CONFIG_SND_HDSPM is not set
-+# CONFIG_SND_ICE1712 is not set
-+# CONFIG_SND_ICE1724 is not set
-+# CONFIG_SND_INTEL8X0 is not set
-+# CONFIG_SND_INTEL8X0M is not set
-+# CONFIG_SND_KORG1212 is not set
-+# CONFIG_SND_MAESTRO3 is not set
-+# CONFIG_SND_MIXART is not set
-+# CONFIG_SND_NM256 is not set
-+# CONFIG_SND_PCXHR is not set
-+# CONFIG_SND_RIPTIDE is not set
-+# CONFIG_SND_RME32 is not set
-+# CONFIG_SND_RME96 is not set
-+# CONFIG_SND_RME9652 is not set
-+# CONFIG_SND_SONICVIBES is not set
-+# CONFIG_SND_TRIDENT is not set
-+# CONFIG_SND_VIA82XX is not set
-+# CONFIG_SND_VIA82XX_MODEM is not set
-+# CONFIG_SND_VX222 is not set
-+# CONFIG_SND_YMFPCI is not set
-+CONFIG_SND_AC97_POWER_SAVE=y
-+
-+#
-+# USB devices
-+#
-+CONFIG_SND_USB_AUDIO=m
-+CONFIG_SND_USB_USX2Y=m
-+# CONFIG_SND_USB_CAIAQ is not set
-+
-+#
-+# System on Chip audio support
-+#
-+# CONFIG_SND_SOC is not set
-+
-+#
-+# Open Sound System
-+#
-+# CONFIG_SOUND_PRIME is not set
-+CONFIG_AC97_BUS=m
-+
-+#
-+# HID Devices
-+#
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+
-+#
-+# USB Input Devices
-+#
-+CONFIG_USB_HID=y
-+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-+# CONFIG_HID_FF is not set
-+CONFIG_USB_HIDDEV=y
-+
-+#
-+# USB support
-+#
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_DEVICE_CLASS is not set
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_SUSPEND is not set
-+CONFIG_USB_PERSIST=y
-+# CONFIG_USB_OTG is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_EHCI_SPLIT_ISO=y
-+CONFIG_USB_EHCI_ROOT_HUB_TT=y
-+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
-+# CONFIG_USB_ISP116X_HCD is not set
-+CONFIG_USB_OHCI_HCD=y
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-+# CONFIG_USB_UHCI_HCD is not set
-+# CONFIG_USB_SL811_HCD is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+CONFIG_USB_ACM=m
-+CONFIG_USB_PRINTER=m
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+CONFIG_USB_STORAGE_DATAFAB=y
-+CONFIG_USB_STORAGE_FREECOM=y
-+CONFIG_USB_STORAGE_DPCM=y
-+CONFIG_USB_STORAGE_USBAT=y
-+CONFIG_USB_STORAGE_SDDR09=y
-+CONFIG_USB_STORAGE_SDDR55=y
-+CONFIG_USB_STORAGE_JUMPSHOT=y
-+CONFIG_USB_STORAGE_ALAUDA=y
-+# CONFIG_USB_STORAGE_KARMA is not set
-+CONFIG_USB_LIBUSUAL=y
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+CONFIG_USB_MON=y
-+
-+#
-+# USB port drivers
-+#
-+
-+#
-+# USB Serial Converter support
-+#
-+CONFIG_USB_SERIAL=m
-+CONFIG_USB_SERIAL_GENERIC=y
-+# CONFIG_USB_SERIAL_AIRCABLE is not set
-+# CONFIG_USB_SERIAL_AIRPRIME is not set
-+# CONFIG_USB_SERIAL_ARK3116 is not set
-+# CONFIG_USB_SERIAL_BELKIN is not set
-+# CONFIG_USB_SERIAL_WHITEHEAT is not set
-+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-+CONFIG_USB_SERIAL_CP2101=m
-+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-+# CONFIG_USB_SERIAL_EMPEG is not set
-+# CONFIG_USB_SERIAL_FTDI_SIO is not set
-+# CONFIG_USB_SERIAL_FUNSOFT is not set
-+# CONFIG_USB_SERIAL_VISOR is not set
-+# CONFIG_USB_SERIAL_IPAQ is not set
-+# CONFIG_USB_SERIAL_IR is not set
-+# CONFIG_USB_SERIAL_EDGEPORT is not set
-+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-+# CONFIG_USB_SERIAL_GARMIN is not set
-+# CONFIG_USB_SERIAL_IPW is not set
-+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-+# CONFIG_USB_SERIAL_KEYSPAN is not set
-+# CONFIG_USB_SERIAL_KLSI is not set
-+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-+# CONFIG_USB_SERIAL_MCT_U232 is not set
-+# CONFIG_USB_SERIAL_MOS7720 is not set
-+# CONFIG_USB_SERIAL_MOS7840 is not set
-+# CONFIG_USB_SERIAL_NAVMAN is not set
-+CONFIG_USB_SERIAL_PL2303=m
-+# CONFIG_USB_SERIAL_HP4X is not set
-+# CONFIG_USB_SERIAL_SAFE is not set
-+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-+# CONFIG_USB_SERIAL_TI is not set
-+# CONFIG_USB_SERIAL_CYBERJACK is not set
-+# CONFIG_USB_SERIAL_XIRCOM is not set
-+# CONFIG_USB_SERIAL_OPTION is not set
-+# CONFIG_USB_SERIAL_OMNINET is not set
-+# CONFIG_USB_SERIAL_DEBUG is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_SISUSBVGA is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+
-+#
-+# USB DSL modem support
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+# CONFIG_USB_GADGET is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+CONFIG_MMC_SDHCI=y
-+# CONFIG_MMC_WBSD is not set
-+# CONFIG_MMC_TIFM_SD is not set
-+
-+#
-+# LED devices
-+#
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+
-+#
-+# LED drivers
-+#
-+CONFIG_LEDS_OLPC=y
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-+
-+#
-+# InfiniBand support
-+#
-+# CONFIG_INFINIBAND is not set
-+
-+#
-+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-+#
-+# CONFIG_EDAC is not set
-+
-+#
-+# Real Time Clock
-+#
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+# CONFIG_RTC_HCTOSYS is not set
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+
-+#
-+# Platform RTC drivers
-+#
-+CONFIG_RTC_DRV_CMOS=y
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+
-+#
-+# DMA Engine support
-+#
-+# CONFIG_DMA_ENGINE is not set
-+
-+#
-+# DMA Clients
-+#
-+
-+#
-+# DMA Devices
-+#
-+
-+#
-+# Virtualization
-+#
-+# CONFIG_KVM is not set
-+
-+#
-+# Sysprof
-+#
-+CONFIG_SYSPROF=m
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+CONFIG_EXT2_FS_XATTR=y
-+CONFIG_EXT2_FS_POSIX_ACL=y
-+CONFIG_EXT2_FS_SECURITY=y
-+CONFIG_EXT2_FS_XIP=y
-+CONFIG_FS_XIP=y
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+CONFIG_EXT3_FS_POSIX_ACL=y
-+CONFIG_EXT3_FS_SECURITY=y
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+CONFIG_FS_POSIX_ACL=y
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+CONFIG_QUOTA=y
-+# CONFIG_QFMT_V1 is not set
-+CONFIG_QFMT_V2=y
-+CONFIG_QUOTACTL=y
-+CONFIG_DNOTIFY=y
-+CONFIG_AUTOFS_FS=m
-+CONFIG_AUTOFS4_FS=m
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+CONFIG_ISO9660_FS=y
-+CONFIG_JOLIET=y
-+CONFIG_ZISOFS=y
-+CONFIG_UDF_FS=m
-+CONFIG_UDF_NLS=y
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=m
-+CONFIG_MSDOS_FS=m
-+CONFIG_VFAT_FS=m
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_KCORE=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+CONFIG_HUGETLBFS=y
-+CONFIG_HUGETLB_PAGE=y
-+CONFIG_PROMFS_FS=y
-+CONFIG_RAMFS=y
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_ECRYPT_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+CONFIG_JFFS2_SUMMARY=y
-+CONFIG_JFFS2_FS_XATTR=y
-+CONFIG_JFFS2_FS_POSIX_ACL=y
-+CONFIG_JFFS2_FS_SECURITY=y
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+CONFIG_CRAMFS=m
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+
-+#
-+# Network File Systems
-+#
-+CONFIG_NFS_FS=m
-+CONFIG_NFS_V3=y
-+CONFIG_NFS_V3_ACL=y
-+CONFIG_NFS_V4=y
-+CONFIG_NFS_DIRECTIO=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=m
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_ACL_SUPPORT=m
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=m
-+CONFIG_SUNRPC_GSS=m
-+# CONFIG_SUNRPC_BIND34 is not set
-+CONFIG_RPCSEC_GSS_KRB5=m
-+CONFIG_RPCSEC_GSS_SPKM3=m
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+# CONFIG_9P_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_BSD_DISKLABEL is not set
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+# CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="utf8"
-+CONFIG_NLS_CODEPAGE_437=y
-+CONFIG_NLS_CODEPAGE_737=m
-+CONFIG_NLS_CODEPAGE_775=m
-+CONFIG_NLS_CODEPAGE_850=m
-+CONFIG_NLS_CODEPAGE_852=m
-+CONFIG_NLS_CODEPAGE_855=m
-+CONFIG_NLS_CODEPAGE_857=m
-+CONFIG_NLS_CODEPAGE_860=m
-+CONFIG_NLS_CODEPAGE_861=m
-+CONFIG_NLS_CODEPAGE_862=m
-+CONFIG_NLS_CODEPAGE_863=m
-+CONFIG_NLS_CODEPAGE_864=m
-+CONFIG_NLS_CODEPAGE_865=m
-+CONFIG_NLS_CODEPAGE_866=m
-+CONFIG_NLS_CODEPAGE_869=m
-+CONFIG_NLS_CODEPAGE_936=m
-+CONFIG_NLS_CODEPAGE_950=m
-+CONFIG_NLS_CODEPAGE_932=m
-+CONFIG_NLS_CODEPAGE_949=m
-+CONFIG_NLS_CODEPAGE_874=m
-+CONFIG_NLS_ISO8859_8=m
-+CONFIG_NLS_CODEPAGE_1250=m
-+CONFIG_NLS_CODEPAGE_1251=m
-+CONFIG_NLS_ASCII=y
-+CONFIG_NLS_ISO8859_1=m
-+CONFIG_NLS_ISO8859_2=m
-+CONFIG_NLS_ISO8859_3=m
-+CONFIG_NLS_ISO8859_4=m
-+CONFIG_NLS_ISO8859_5=m
-+CONFIG_NLS_ISO8859_6=m
-+CONFIG_NLS_ISO8859_7=m
-+CONFIG_NLS_ISO8859_9=m
-+CONFIG_NLS_ISO8859_13=m
-+CONFIG_NLS_ISO8859_14=m
-+CONFIG_NLS_ISO8859_15=m
-+CONFIG_NLS_KOI8_R=m
-+CONFIG_NLS_KOI8_U=m
-+CONFIG_NLS_UTF8=m
-+
-+#
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
-+# Instrumentation Support
-+#
-+CONFIG_PROFILING=y
-+CONFIG_OPROFILE=m
-+CONFIG_KPROBES=y
-+
-+#
-+# Kernel hacking
-+#
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_PRINTK_TIME=y
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+CONFIG_MAGIC_SYSRQ=y
-+CONFIG_UNUSED_SYMBOLS=y
-+CONFIG_DEBUG_FS=y
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHEDSTATS=y
-+CONFIG_TIMER_STATS=y
-+# CONFIG_DEBUG_SLAB is not set
-+CONFIG_DEBUG_PREEMPT=y
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+CONFIG_DEBUG_SPINLOCK=y
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+CONFIG_DEBUG_SPINLOCK_SLEEP=y
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+# CONFIG_DEBUG_BUGVERBOSE is not set
-+CONFIG_DEBUG_INFO=y
-+CONFIG_DEBUG_VM=y
-+CONFIG_DEBUG_LIST=y
-+# CONFIG_FRAME_POINTER is not set
-+# CONFIG_FORCED_INLINING is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_LKDTM is not set
-+# CONFIG_FAULT_INJECTION is not set
-+CONFIG_EARLY_PRINTK=y
-+CONFIG_DEBUG_STACKOVERFLOW=y
-+CONFIG_DEBUG_STACK_USAGE=y
-+
-+#
-+# Page alloc debug is incompatible with Software Suspend on i386
-+#
-+CONFIG_DEBUG_RODATA=y
-+CONFIG_4KSTACKS=y
-+CONFIG_DOUBLEFAULT=y
-+
-+#
-+# Security options
-+#
-+CONFIG_KEYS=y
-+CONFIG_KEYS_DEBUG_PROC_KEYS=y
-+CONFIG_SECURITY=y
-+CONFIG_SECURITY_NETWORK=y
-+CONFIG_SECURITY_NETWORK_XFRM=y
-+CONFIG_SECURITY_CAPABILITIES=y
-+# CONFIG_SECURITY_ROOTPLUG is not set
-+CONFIG_SECURITY_SELINUX=y
-+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
-+# CONFIG_SECURITY_SELINUX_DISABLE is not set
-+CONFIG_SECURITY_SELINUX_DEVELOP=y
-+CONFIG_SECURITY_SELINUX_AVC_STATS=y
-+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-+# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
-+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
-+
-+#
-+# Cryptographic options
-+#
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_HMAC=y
-+CONFIG_CRYPTO_XCBC=m
-+CONFIG_CRYPTO_NULL=m
-+CONFIG_CRYPTO_MD4=m
-+CONFIG_CRYPTO_MD5=y
-+CONFIG_CRYPTO_SHA1=y
-+CONFIG_CRYPTO_SHA256=m
-+CONFIG_CRYPTO_SHA512=m
-+CONFIG_CRYPTO_WP512=m
-+CONFIG_CRYPTO_TGR192=m
-+CONFIG_CRYPTO_GF128MUL=m
-+CONFIG_CRYPTO_ECB=m
-+CONFIG_CRYPTO_CBC=m
-+CONFIG_CRYPTO_PCBC=m
-+CONFIG_CRYPTO_LRW=m
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_DES=m
-+CONFIG_CRYPTO_FCRYPT=m
-+CONFIG_CRYPTO_BLOWFISH=m
-+CONFIG_CRYPTO_TWOFISH=m
-+CONFIG_CRYPTO_TWOFISH_COMMON=m
-+# CONFIG_CRYPTO_TWOFISH_586 is not set
-+CONFIG_CRYPTO_SERPENT=m
-+CONFIG_CRYPTO_AES=m
-+CONFIG_CRYPTO_AES_586=m
-+CONFIG_CRYPTO_CAST5=m
-+CONFIG_CRYPTO_CAST6=m
-+CONFIG_CRYPTO_TEA=m
-+CONFIG_CRYPTO_ARC4=m
-+CONFIG_CRYPTO_KHAZAD=m
-+CONFIG_CRYPTO_ANUBIS=m
-+CONFIG_CRYPTO_DEFLATE=m
-+CONFIG_CRYPTO_MICHAEL_MIC=m
-+CONFIG_CRYPTO_CRC32C=m
-+CONFIG_CRYPTO_CAMELLIA=m
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Hardware crypto devices
-+#
-+# CONFIG_CRYPTO_DEV_PADLOCK is not set
-+CONFIG_CRYPTO_DEV_GEODE=y
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_CRC_CCITT=m
-+CONFIG_CRC16=m
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+CONFIG_LIBCRC32C=m
-+CONFIG_AUDIT_GENERIC=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_REED_SOLOMON=y
-+CONFIG_REED_SOLOMON_DEC16=y
-+CONFIG_TEXTSEARCH=y
-+CONFIG_TEXTSEARCH_KMP=m
-+CONFIG_TEXTSEARCH_BM=m
-+CONFIG_TEXTSEARCH_FSM=m
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_X86_BIOS_REBOOT=y
-+CONFIG_KTIME_SCALAR=y
diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
index 9d33b00..2e2cf42 100644
--- a/arch/i386/kernel/Makefile
@@ -5702,2246 +182,8 @@ index 8f03821..3176280 100644
page_pde_offset = (__PAGE_OFFSET >> 20);
movl $(pg0 - __PAGE_OFFSET), %edi
-diff --git a/arch/i386/kernel/mfgpt.c b/arch/i386/kernel/mfgpt.c
-new file mode 100644
-index 0000000..2e62a41
---- /dev/null
-+++ b/arch/i386/kernel/mfgpt.c
-@@ -0,0 +1,354 @@
-+/* Driver/API for AMD Geode Multi-Function General Purpose Timers (MFGPT)
-+ *
-+ * Copyright (C) 2006, Advanced Micro Devices, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+/* The MFPGT timers on the CS5536 provide us with suitable timers to use
-+ * as clock event sources - not as good as a HPET or APIC, but certainly
-+ * better then the PIT. This isn't a general purpose MFGPT driver, but
-+ * a simplified one designed specifically to act as a clock event source.
-+ * For full details about the MFGPT, please consult the CS5536 data sheet.
-+*/
-+
-+/* We are using the 32Khz input clock - its the only one that has the
-+ * ranges we find desirable. The following table lists the suitable
-+ * divisors and the associated hz, minimum interval
-+ * and the maximum interval:
-+
-+ Divisor Hz Min Delta (S) Max Delta (S)
-+ 1 32000 .0005 2.048
-+ 2 16000 .001 4.096
-+ 4 8000 .002 8.192
-+ 8 4000 .004 16.384
-+ 16 2000 .008 32.768
-+ 32 1000 .016 65.536
-+ 64 500 .032 131.072
-+ 128 250 .064 262.144
-+ 256 125 .128 524.288
-+*/
-+
-+#include <linux/kernel.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/clocksource.h>
-+#include <linux/clockchips.h>
-+#include <asm/geode.h>
-+
-+#include "do_timer.h"
-+
-+#define MFGPT_MAX_TIMERS 8
-+
-+#define F_AVAIL 0x01
-+
-+static struct mfgpt_timer_t {
-+ int flags;
-+ struct module *owner;
-+} mfgpt_timers[MFGPT_MAX_TIMERS];
-+
-+/* Selected from the table above */
-+
-+#define MFGPT_DIVISOR 16
-+#define MFGPT_SCALE 4 /* divisor = 2^(scale) */
-+#define MFGPT_HZ (32000 / MFGPT_DIVISOR)
-+#define MFGPT_PERIODIC (MFGPT_HZ / HZ)
-+
-+#ifdef CONFIG_GEODE_MFGPT_TIMER
-+static int __init mfgpt_timer_setup(void);
-+#else
-+#define mfgpt_timer_setup() (0)
-+#endif
-+
-+/* Allow for disabling of MFGPTs */
-+static int disable = 0;
-+static int __init mfgpt_disable(char *s)
-+{
-+ disable = 1;
-+ return 1;
-+}
-+__setup("nomfgpt", mfgpt_disable);
-+
-+/*
-+ * Check whether any MFGPTs are available for the kernel to use. In most
-+ * cases, firmware that uses AMD's VSA code will claim all timers during
-+ * bootup; we certainly don't want to take them if they're already in use.
-+ * In other cases (such as with VSAless OpenFirmware), the system firmware
-+ * leaves timers available for us to use.
-+ */
-+int __init geode_mfgpt_detect(void)
-+{
-+ int count = 0, i;
-+ u16 val;
-+
-+ if (disable) {
-+ printk(KERN_INFO "geode-mfgpt: Skipping MFGPT setup\n");
-+ return 0;
-+ }
-+
-+ for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
-+ val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
-+ if (!(val & MFGPT_SETUP_SETUP)) {
-+ mfgpt_timers[i].flags = F_AVAIL;
-+ count++;
-+ }
-+ }
-+
-+ /* set up clock event device, if desired */
-+ i = mfgpt_timer_setup();
-+
-+ return count;
-+}
-+
-+int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable)
-+{
-+ u32 msr, mask, value, dummy;
-+ int shift = (cmp == MFGPT_CMP1) ? 0 : 8;
-+
-+ if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
-+ return -EIO;
-+
-+ /*
-+ * The register maps for these are described in sections 6.17.1.x of
-+ * the AMD Geode CS5536 Companion Device Data Book.
-+ */
-+ switch(event) {
-+ case MFGPT_EVENT_RESET:
-+ /* XXX: According to the docs, we cannot reset timers above
-+ * 6; that is, resets for 7 and 8 will be ignored. Is this
-+ * a problem? */
-+ msr = MFGPT_NR_MSR;
-+ mask = 1 << (timer + 24);
-+ break;
-+
-+ case MFGPT_EVENT_NMI:
-+ msr = MFGPT_NR_MSR;
-+ mask = 1 << (timer + shift);
-+ break;
-+
-+ case MFGPT_EVENT_IRQ:
-+ msr = MFGPT_IRQ_MSR;
-+ mask = 1 << (timer + shift);
-+ break;
-+
-+ default:
-+ return -EIO;
-+ }
-+
-+ rdmsr(msr, value, dummy);
-+
-+ if (enable)
-+ value |= mask;
-+ else
-+ value &= ~mask;
-+
-+ wrmsr(msr, value, dummy);
-+ return 0;
-+}
-+EXPORT_SYMBOL(geode_mfgpt_toggle_event);
-+
-+int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable)
-+{
-+ u32 val, dummy;
-+ int offset;
-+
-+ if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
-+ return -EIO;
-+
-+ if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
-+ return -EIO;
-+
-+ rdmsr(0x51400022, val, dummy);
-+
-+ offset = (timer % 4) * 4;
-+
-+ val &= ~((0xF << offset) | (0xF << (offset + 16)));
-+
-+ if (enable) {
-+ val |= (irq & 0x0F) << (offset);
-+ val |= (irq & 0x0F) << (offset + 16);
-+ }
-+
-+ wrmsr(0x51400022, val, dummy);
-+ return 0;
-+}
-+EXPORT_SYMBOL(geode_mfgpt_set_irq);
-+
-+static int mfgpt_get(int timer, struct module *owner)
-+{
-+ mfgpt_timers[timer].flags &= ~F_AVAIL;
-+ mfgpt_timers[timer].owner = owner;
-+ printk(KERN_INFO "geode-mfgpt: Registered timer %d\n", timer);
-+ return timer;
-+}
-+
-+int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner)
-+{
-+ int i;
-+
-+ if (!geode_get_dev_base(GEODE_DEV_MFGPT))
-+ return -ENODEV;
-+ if (timer >= MFGPT_MAX_TIMERS)
-+ return -EIO;
-+
-+ if (timer < 0) {
-+ /* Try to find an available timer */
-+ for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
-+ if (mfgpt_timers[i].flags & F_AVAIL)
-+ return mfgpt_get(i, owner);
-+
-+ if (i == 5 && domain == MFGPT_DOMAIN_WORKING)
-+ break;
-+ }
-+ }
-+ else {
-+ /* If they requested a specific timer, try to honor that */
-+ if (mfgpt_timers[timer].flags & F_AVAIL)
-+ return mfgpt_get(timer, owner);
-+ }
-+
-+ /* No timers available - too bad */
-+ return -1;
-+}
-+EXPORT_SYMBOL(geode_mfgpt_alloc_timer);
-+
-+#ifdef CONFIG_GEODE_MFGPT_TIMER
-+
-+static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN;
-+static u16 mfgpt_event_clock;
-+
-+static int irq = 7;
-+static int __init mfgpt_setup(char *str)
-+{
-+ get_option(&str, &irq);
-+ return 1;
-+}
-+__setup("mfgpt_irq=", mfgpt_setup);
-+
-+static inline void mfgpt_disable_timer(u16 clock)
-+{
-+ u16 val = geode_mfgpt_read(clock, MFGPT_REG_SETUP);
-+ geode_mfgpt_write(clock, MFGPT_REG_SETUP, val & ~MFGPT_SETUP_CNTEN);
-+}
-+
-+static int mfgpt_next_event(unsigned long, struct clock_event_device *);
-+static void mfgpt_set_mode(enum clock_event_mode, struct clock_event_device *);
-+
-+static struct clock_event_device mfgpt_clockevent = {
-+ .name = "mfgpt-timer",
-+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-+ .set_mode = mfgpt_set_mode,
-+ .set_next_event = mfgpt_next_event,
-+ .rating = 250,
-+ .cpumask = CPU_MASK_ALL,
-+ .shift = 32
-+};
-+
-+static inline void mfgpt_start_timer(u16 clock, u16 delta)
-+{
-+ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_CMP2, (u16) delta);
-+ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
-+
-+ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
-+ MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
-+}
-+
-+static void mfgpt_set_mode(enum clock_event_mode mode,
-+ struct clock_event_device *evt)
-+{
-+ mfgpt_disable_timer(mfgpt_event_clock);
-+
-+ if (mode == CLOCK_EVT_MODE_PERIODIC)
-+ mfgpt_start_timer(mfgpt_event_clock, MFGPT_PERIODIC);
-+
-+ mfgpt_tick_mode = mode;
-+}
-+
-+static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt)
-+{
-+ mfgpt_start_timer(mfgpt_event_clock, delta);
-+ return 0;
-+}
-+
-+/* Assume (foolishly?), that this interrupt was due to our tick */
-+
-+static irqreturn_t mfgpt_tick(int irq, void *dev_id)
-+{
-+ if (mfgpt_tick_mode == CLOCK_EVT_MODE_SHUTDOWN)
-+ return IRQ_HANDLED;
-+
-+ /* Turn off the clock */
-+ mfgpt_disable_timer(mfgpt_event_clock);
-+
-+ /* Clear the counter */
-+ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
-+
-+ /* Restart the clock in periodic mode */
-+
-+ if (mfgpt_tick_mode == CLOCK_EVT_MODE_PERIODIC) {
-+ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
-+ MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
-+ }
-+
-+ mfgpt_clockevent.event_handler(&mfgpt_clockevent);
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction mfgptirq = {
-+ .handler = mfgpt_tick,
-+ .flags = IRQF_DISABLED | IRQF_NOBALANCING,
-+ .mask = CPU_MASK_NONE,
-+ .name = "mfgpt-timer"
-+};
-+
-+static int __init mfgpt_timer_setup(void)
-+{
-+ int timer, ret;
-+ u16 val;
-+
-+ timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING, THIS_MODULE);
-+ if (timer < 0) {
-+ printk(KERN_ERR "mfgpt-timer: Could not allocate a MFPGT timer\n");
-+ return -ENODEV;
-+ }
-+
-+ mfgpt_event_clock = timer;
-+ /* Set the clock scale and enable the event mode for CMP2 */
-+ val = MFGPT_SCALE | (3 << 8);
-+
-+ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val);
-+
-+ /* Set up the IRQ on the MFGPT side */
-+ if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) {
-+ printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq);
-+ return -EIO;
-+ }
-+
-+ /* And register it with the kernel */
-+ ret = setup_irq(irq, &mfgptirq);
-+
-+ if (ret) {
-+ printk(KERN_ERR "mfgpt-timer: Unable to set up the interrupt.\n");
-+ goto err;
-+ }
-+
-+ /* Set up the clock event */
-+ mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC, 32);
-+ mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF, &mfgpt_clockevent);
-+ mfgpt_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE, &mfgpt_clockevent);
-+
-+ printk("mfgpt-timer: registering the MFGT timer as a clock event.\n");
-+ clockevents_register_device(&mfgpt_clockevent);
-+
-+ return 0;
-+
-+err:
-+ geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq);
-+ printk(KERN_ERR "mfgpt-timer: Unable to set up the MFGPT clock source\n");
-+ return -EIO;
-+}
-+
-+#endif
-diff --git a/arch/i386/kernel/ofw.c b/arch/i386/kernel/ofw.c
-new file mode 100644
-index 0000000..fdcd936
---- /dev/null
-+++ b/arch/i386/kernel/ofw.c
-@@ -0,0 +1,100 @@
-+/*
-+ * ofw.c - Open Firmware client interface for 32-bit systems.
-+ * This code is intended to be portable to any 32-bit Open Firmware
-+ * implementation with a standard client interface that can be
-+ * called when Linux is running.
-+ *
-+ * Copyright (C) 2007 Mitch Bradley <wmb@firmworks.com>
-+ * Copyright (C) 2007 Andres Salomon <dilinger@debian.org>
-+ */
-+
-+#include <stdarg.h>
-+#include <linux/spinlock.h>
-+#include <linux/module.h>
-+#include <asm/ofw.h>
-+
-+
-+int (*call_firmware)(int *);
-+
-+static DEFINE_SPINLOCK(prom_lock);
-+
-+#define MAXARGS 20
-+
-+/*
-+ * The return value from ofw() in all cases is 0 if the attempt to call the
-+ * function succeeded, <0 otherwise. That return value is from the
-+ * gateway function only. Any results from the called function are returned
-+ * via output argument pointers.
-+ *
-+ * Here are call templates for all the standard OFW client services:
-+ *
-+ * ofw("test", 1, 1, namestr, &missing);
-+ * ofw("peer", 1, 1, phandle, &sibling_phandle);
-+ * ofw("child", 1, 1, phandle, &child_phandle);
-+ * ofw("parent", 1, 1, phandle, &parent_phandle);
-+ * ofw("instance_to_package", 1, 1, ihandle, &phandle);
-+ * ofw("getproplen", 2, 1, phandle, namestr, &proplen);
-+ * ofw("getprop", 4, 1, phandle, namestr, bufaddr, buflen, &size);
-+ * ofw("nextprop", 3, 1, phandle, previousstr, bufaddr, &flag);
-+ * ofw("setprop", 4, 1, phandle, namestr, bufaddr, len, &size);
-+ * ofw("canon", 3, 1, devspecstr, bufaddr, buflen, &length);
-+ * ofw("finddevice", 1, 1, devspecstr, &phandle);
-+ * ofw("instance-to-path", 3, 1, ihandle, bufaddr, buflen, &length);
-+ * ofw("package-to-path", 3, 1, phandle, bufaddr, buflen, &length);
-+ * ofw("call_method", numin, numout, in0, in1, ..., &out0, &out1, ...);
-+ * ofw("open", 1, 1, devspecstr, &ihandle);
-+ * ofw("close", 1, 0, ihandle);
-+ * ofw("read", 3, 1, ihandle, addr, len, &actual);
-+ * ofw("write", 3, 1, ihandle, addr, len, &actual);
-+ * ofw("seek", 3, 1, ihandle, pos_hi, pos_lo, &status);
-+ * ofw("claim", 3, 1, virtaddr, size, align, &baseaddr);
-+ * ofw("release", 2, 0, virtaddr, size);
-+ * ofw("boot", 1, 0, bootspecstr);
-+ * ofw("enter", 0, 0);
-+ * ofw("exit", 0, 0);
-+ * ofw("chain", 5, 0, virtaddr, size, entryaddr, argsaddr, len);
-+ * ofw("interpret", numin+1, numout+1, cmdstr, in0, ..., &catchres, &out0, ...);
-+ * ofw("set-callback", 1, 1, newfuncaddr, &oldfuncaddr);
-+ * ofw("set-symbol-lookup", 2, 0, symtovaladdr, valtosymaddr);
-+ * ofw("milliseconds", 0, 1, &ms);
-+ */
-+
-+int ofw(char *name, int numargs, int numres, ...)
-+{
-+ va_list ap;
-+ int argarray[MAXARGS+3];
-+ int argnum = 3;
-+ int retval;
-+ int *intp;
-+ unsigned long flags;
-+
-+ if (!call_firmware)
-+ return -1;
-+ if ((numargs + numres) > MAXARGS)
-+ return -1; /* spit out an error? */
-+
-+ argarray[0] = (int) name;
-+ argarray[1] = numargs;
-+ argarray[2] = numres;
-+
-+ va_start(ap, numres);
-+ while (numargs) {
-+ argarray[argnum++] = va_arg(ap, int);
-+ numargs--;
-+ }
-+
-+ spin_lock_irqsave(&prom_lock, flags);
-+ retval = call_firmware(argarray);
-+ spin_unlock_irqrestore(&prom_lock, flags);
-+
-+ if (retval == 0) {
-+ while (numres) {
-+ intp = va_arg(ap, int *);
-+ *intp = argarray[argnum++];
-+ numres--;
-+ }
-+ }
-+ va_end(ap);
-+ return retval;
-+}
-+EXPORT_SYMBOL(ofw);
-diff --git a/arch/i386/kernel/olpc-pm.c b/arch/i386/kernel/olpc-pm.c
-new file mode 100644
-index 0000000..93149f1
---- /dev/null
-+++ b/arch/i386/kernel/olpc-pm.c
-@@ -0,0 +1,785 @@
-+/* olpc-pm.c
-+ * © 2006 Red Hat, Inc.
-+ * Portions also copyright 2006 Advanced Micro Devices, Inc.
-+ * GPLv2
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/input.h>
-+#include <linux/suspend.h>
-+#include <linux/bootmem.h>
-+#include <linux/platform_device.h>
-+#include <linux/rtc.h>
-+#include <linux/mc146818rtc.h>
-+#include <asm/io.h>
-+
-+#include <asm/olpc.h>
-+
-+/* A few words about accessing the ACPI and PM registers. Long story short,
-+ byte and word accesses of the ACPI and PM registers is broken. The only
-+ way to do it really correctly is to use dword accesses, which we do
-+ throughout this code. For more details, please consult Eratta 17 and 18
-+ here:
-+
-+ http://www.amd.com/files/connectivitysolutions/geode/geode_gx/34472D_CS5536_B1_specupdate.pdf
-+*/
-+
-+#define PM_IRQ 3
-+
-+#define CS5536_PM_PWRBTN (1 << 8)
-+#define CS5536_PM_RTC (1 << 10)
-+
-+#define GPIO_WAKEUP_EC (1 << 31)
-+#define GPIO_WAKEUP_LID (1 << 30)
-+
-+#define PM_MODE_NORMAL 0
-+#define PM_MODE_TEST 1
-+#define PM_MODE_MAX 2
-+
-+/* These, and the battery EC commands, should be in an olpc.h. */
-+#define EC_WRITE_SCI_MASK 0x1b
-+#define EC_READ_SCI_MASK 0x1c
-+
-+extern void do_olpc_suspend_lowlevel(void);
-+
-+static struct {
-+ unsigned long address;
-+ unsigned short segment;
-+} ofw_bios_entry = { 0, __KERNEL_CS };
-+
-+static int olpc_pm_mode = PM_MODE_NORMAL;
-+static unsigned long acpi_base;
-+static unsigned long pms_base;
-+static int sci_irq;
-+static int olpc_lid_flag;
-+
-+static struct input_dev *pm_inputdev;
-+static struct input_dev *lid_inputdev;
-+static struct input_dev *ebook_inputdev;
-+static struct pm_ops olpc_pm_ops;
-+
-+static int gpio_wake_events = 0;
-+static int ebook_state = -1;
-+static u16 olpc_wakeup_mask = 0;
-+
-+struct platform_device olpc_powerbutton_dev = {
-+ .name = "powerbutton",
-+ .id = -1,
-+};
-+
-+struct platform_device olpc_lid_dev = {
-+ .name = "lid",
-+ .id = -1,
-+};
-+
-+static void __init init_ebook_state(void)
-+{
-+ if (olpc_ec_cmd(0x2a, NULL, 0, (unsigned char *) &ebook_state, 1)) {
-+ printk(KERN_WARNING "olpc-pm: failed to get EBOOK state!\n");
-+ ebook_state = 0;
-+ }
-+ ebook_state &= 1;
-+
-+ /* the input layer needs to know what value to default to as well */
-+ input_report_switch(ebook_inputdev, SW_TABLET_MODE, ebook_state);
-+ input_sync(ebook_inputdev);
-+}
-+
-+static void (*battery_callback)(unsigned long);
-+static DEFINE_SPINLOCK(battery_callback_lock);
-+
-+/* propagate_events is non-NULL if run from workqueue,
-+ NULL when called at init time to flush SCI queue */
-+static void process_sci_queue(struct work_struct *propagate_events)
-+{
-+ unsigned char data = 0;
-+ unsigned char battery_events = 0;
-+ int ret;
-+
-+ do {
-+ ret = olpc_ec_cmd(0x84, NULL, 0, &data, 1);
-+ if (!ret) {
-+ printk(KERN_DEBUG "olpc-pm: SCI 0x%x received\n",
-+ data);
-+
-+ switch (data) {
-+ case EC_SCI_SRC_EMPTY:
-+ case EC_SCI_SRC_GAME:
-+ case EC_SCI_SRC_WLAN:
-+ /* we ignore these for now */
-+ break;
-+ case EC_SCI_SRC_BATERR:
-+ printk(KERN_ERR "olpc-pm: Battery Management System detected an error! Remove turnip from battery slot.\n");
-+ case EC_SCI_SRC_BATSOC:
-+ case EC_SCI_SRC_BATTERY:
-+ case EC_SCI_SRC_ACPWR:
-+ battery_events |= data;
-+ break;
-+ case EC_SCI_SRC_EBOOK:
-+ ebook_state = !ebook_state;
-+ if (propagate_events) {
-+ input_report_switch(ebook_inputdev,
-+ SW_TABLET_MODE, ebook_state);
-+ input_sync(ebook_inputdev);
-+ }
-+ break;
-+ default:
-+ printk(KERN_ERR "olpc-pm: Unknown SCI event 0x%x occurred!\n", data);
-+ }
-+ }
-+ } while (data && !ret);
-+
-+ if (battery_events && battery_callback && propagate_events) {
-+ void (*cbk)(unsigned long);
-+
-+ /* Older EC versions didn't distinguish between AC and battery
-+ events */
-+ if (olpc_platform_info.ecver < 0x45)
-+ battery_events = EC_SCI_SRC_BATTERY | EC_SCI_SRC_ACPWR;
-+
-+ spin_lock(&battery_callback_lock);
-+ cbk = battery_callback;
-+ spin_unlock(&battery_callback_lock);
-+
-+ cbk(battery_events);
-+ }
-+
-+ if (ret)
-+ printk(KERN_WARNING "Failed to clear SCI queue!\n");
-+}
-+
-+static DECLARE_WORK(sci_work, process_sci_queue);
-+
-+void olpc_register_battery_callback(void (*f)(unsigned long))
-+{
-+ spin_lock(&battery_callback_lock);
-+ battery_callback = f;
-+ spin_unlock(&battery_callback_lock);
-+}
-+EXPORT_SYMBOL_GPL(olpc_register_battery_callback);
-+
-+void olpc_deregister_battery_callback(void)
-+{
-+ spin_lock(&battery_callback_lock);
-+ battery_callback = NULL;
-+ spin_unlock(&battery_callback_lock);
-+ cancel_work_sync(&sci_work);
-+}
-+EXPORT_SYMBOL_GPL(olpc_deregister_battery_callback);
-+
-+
-+static int olpc_pm_interrupt(int irq, void *id)
-+{
-+ uint32_t sts, gpe = 0;
-+
-+ sts = inl(acpi_base + PM1_STS);
-+ outl(sts | 0xFFFF, acpi_base + PM1_STS);
-+
-+ if (olpc_get_rev() >= OLPC_REV_B2) {
-+ gpe = inl(acpi_base + PM_GPE0_STS);
-+ outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
-+ }
-+
-+ if (sts & CS5536_PM_PWRBTN) {
-+ input_report_key(pm_inputdev, KEY_POWER, 1);
-+ input_sync(pm_inputdev);
-+ printk(KERN_DEBUG "olpm-pm: PM_PWRBTN event received\n");
-+ /* Do we need to delay this (and hence schedule_work)? */
-+ input_report_key(pm_inputdev, KEY_POWER, 0);
-+ input_sync(pm_inputdev);
-+ }
-+
-+ if (gpe & GPIO_WAKEUP_EC) {
-+ geode_gpio_clear(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
-+ schedule_work(&sci_work);
-+ }
-+
-+ if (gpe & GPIO_WAKEUP_LID) {
-+ /* Disable events */
-+ geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
-+
-+ /* Clear the edge */
-+
-+ if (olpc_lid_flag)
-+ geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
-+ else
-+ geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
-+
-+ /* Clear the status too */
-+ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS);
-+ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS);
-+
-+ /* The line is high when the LID is open, but SW_LID
-+ * should be high when the LID is closed, so we pass the old
-+ * value of olpc_lid_flag
-+ */
-+
-+ input_report_switch(lid_inputdev, SW_LID, olpc_lid_flag);
-+ input_sync(lid_inputdev);
-+
-+ /* Swap the status */
-+ olpc_lid_flag = !olpc_lid_flag;
-+
-+ if (olpc_lid_flag)
-+ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
-+ else
-+ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
-+
-+ /* re-enable the event */
-+ geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * For now, only support STR. We also don't support suspending on
-+ * B1s, due to difficulties with the cafe FPGA.
-+ */
-+static int olpc_pm_state_valid(suspend_state_t pm_state)
-+{
-+ if (pm_state == PM_SUSPEND_MEM && olpc_rev_after(OLPC_REV_B1))
-+ return 1;
-+
-+ return 0;
-+}
-+
-+/* This is a catchall function for operations that just don't belong
-+ * anywhere else. Later we will evaluate if these belong in the
-+ * individual device drivers or the firmware.
-+ * If you add something to this function, please explain yourself with
-+ * a comment.
-+ */
-+
-+extern void gxfb_flatpanel_control(int state);
-+
-+static u32 gpio_wakeup[2];
-+static u64 irq_sources[4];
-+static u64 mfgpt_irq_msr, mfgpt_nr_msr;
-+
-+void olpc_fixup_wakeup(void)
-+{
-+ u32 base = geode_gpio_base();
-+ int i;
-+
-+ /* This clears any pending events from the status register -
-+ * the firmware also does this, but its possible that it tries
-+ * it too early before the key has a chance to debounce
-+ */
-+
-+ outl((CS5536_PM_PWRBTN << 16) | 0xFFFF, acpi_base + PM1_STS);
-+
-+ /* Enable the flatpanel sequencing as early as possible, because
-+ it takes ~64ms to resume. This probably belongs in the firmware */
-+
-+ //gxfb_flatpanel_control(1);
-+
-+ /* Restore the interrupt sources */
-+ wrmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]);
-+ wrmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]);
-+ wrmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]);
-+ wrmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]);
-+
-+ /* Restore the X and Y sources for GPIO */
-+ outl(gpio_wakeup[0], base + GPIO_MAP_X);
-+ outl(gpio_wakeup[1], base + GPIO_MAP_Y);
-+
-+ /* Resture the MFGPT MSRs */
-+ wrmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr);
-+ wrmsrl(MFGPT_NR_MSR, mfgpt_nr_msr);
-+
-+ for (i=0;i<2;i++) {
-+ /* tell the wireless module to restart USB communication */
-+ olpc_ec_cmd(0x24, NULL, 0, NULL, 0);
-+ }
-+}
-+
-+void olpc_fixup_sleep(void)
-+{
-+ u32 base = geode_gpio_base();
-+ int i;
-+
-+ /* Save the X and Y sources for GPIO */
-+ gpio_wakeup[0] = inl(base + GPIO_MAP_X);
-+ gpio_wakeup[1] = inl(base + GPIO_MAP_Y);
-+
-+ /* Save the Y and Z unrestricted sources */
-+
-+ rdmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]);
-+ rdmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]);
-+ rdmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]);
-+ rdmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]);
-+
-+ /* Turn off the MFGPT timers on the way down */
-+
-+ for(i = 0; i < 8; i++) {
-+ u32 val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
-+
-+ if (val & MFGPT_SETUP_SETUP) {
-+ val &= ~MFGPT_SETUP_CNTEN;
-+ geode_mfgpt_write(i, MFGPT_REG_SETUP, val);
-+ }
-+ }
-+
-+ /* Save the MFGPT MSRs */
-+ rdmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr);
-+ rdmsrl(MFGPT_NR_MSR, mfgpt_nr_msr);
-+
-+ if (device_may_wakeup(&olpc_powerbutton_dev.dev))
-+ olpc_wakeup_mask |= CS5536_PM_PWRBTN;
-+ else
-+ olpc_wakeup_mask &= ~(CS5536_PM_PWRBTN);
-+
-+ if (device_may_wakeup(&olpc_lid_dev.dev)) {
-+ geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
-+ gpio_wake_events |= GPIO_WAKEUP_LID;
-+ } else {
-+ geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
-+ gpio_wake_events &= ~(GPIO_WAKEUP_LID);
-+ }
-+}
-+
-+static int olpc_pm_enter(suspend_state_t pm_state)
-+{
-+ /* Only STR is supported */
-+ if (pm_state != PM_SUSPEND_MEM)
-+ return -EINVAL;
-+
-+ olpc_fixup_sleep();
-+
-+ /* Set the GPIO wakeup bits */
-+ outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
-+ outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
-+
-+ /* Save CPU state */
-+ do_olpc_suspend_lowlevel();
-+
-+ olpc_fixup_wakeup();
-+
-+ /* Restore the SCI wakeup events */
-+ outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
-+
-+ return 0;
-+}
-+
-+int asmlinkage olpc_do_sleep(u8 sleep_state)
-+{
-+ void *pgd_addr = __va(read_cr3());
-+ printk(KERN_ERR "olpc_do_sleep!\n"); /* this needs to remain here so
-+ * that gcc doesn't optimize
-+ * away our __va! */
-+ /* FIXME: Set the SCI bits we want to wake up on here */
-+
-+ /* FIXME: Set any other SCI events that we might want here */
-+
-+ outl((olpc_wakeup_mask << 16) | 0xFFFF, acpi_base + PM1_STS);
-+
-+ /* If we are in test mode, then just return (simulate a successful
-+ suspend/resume). Otherwise, if we are doing the real thing,
-+ then go for the gusto */
-+
-+ if (olpc_pm_mode != PM_MODE_TEST) {
-+ __asm__ __volatile__("movl %0,%%eax" : : "r" (pgd_addr));
-+ __asm__("call *(%%edi); cld"
-+ : : "D" (&ofw_bios_entry));
-+ }
-+
-+ return 0;
-+}
-+
-+/* This code will slowly disappear as we fixup the issues in the BIOS */
-+
-+static void __init olpc_fixup_bios(void)
-+{
-+ unsigned long hi, lo;
-+
-+ if (olpc_has_vsa()) {
-+ /* The VSA aggressively sets up the ACPI and PM register for
-+ * trapping - its not enough to force these values in the BIOS -
-+ * they seem to be changed during PCI init as well.
-+ */
-+
-+ /* Change the PM registers to decode to the DD */
-+
-+ rdmsr(0x510100e2, lo, hi);
-+ hi |= 0x80000000;
-+ wrmsr(0x510100e2, lo, hi);
-+
-+ /* Change the ACPI registers to decode to the DD */
-+
-+ rdmsr(0x510100e3, lo, hi);
-+ hi |= 0x80000000;
-+ wrmsr(0x510100e3, lo, hi);
-+ }
-+
-+ /* GPIO24 controls WORK_AUX */
-+
-+ geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_ENABLE);
-+ geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_AUX1);
-+
-+ if (olpc_get_rev() >= OLPC_REV_B2) {
-+ /* GPIO10 is connected to the thermal alarm */
-+ geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_ENABLE);
-+ geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_AUX1);
-+
-+ /* Set up to get LID events */
-+ geode_gpio_set(OLPC_GPIO_LID, GPIO_INPUT_ENABLE);
-+
-+ /* Clear edge detection and event enable for now */
-+ geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
-+ geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
-+ geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
-+
-+ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS);
-+ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS);
-+
-+ /* Set the LID to cause an PME event on group 6 */
-+ geode_gpio_event_pme(OLPC_GPIO_LID, 6);
-+
-+ /* Set PME group 6 to fire the SCI interrupt */
-+ geode_gpio_set_irq(6, sci_irq);
-+ }
-+
-+ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_INPUT_ENABLE);
-+
-+ /* Clear pending events */
-+
-+ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
-+ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_POSITIVE_EDGE_STS);
-+
-+ //geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_EN);
-+ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_EVENTS_ENABLE);
-+
-+ /* Set the SCI to cause a PME event on group 7 */
-+ geode_gpio_event_pme(OLPC_GPIO_ECSCI, 7);
-+
-+ /* And have group 6 also fire the SCI interrupt */
-+ geode_gpio_set_irq(7, sci_irq);
-+}
-+
-+/* This provides a control file for setting up testing of the
-+ power management system. For now, there is just one setting:
-+ "test" which means that we don't actually enter the power
-+ off routine.
-+*/
-+
-+static const char * const pm_states[] = {
-+ [PM_MODE_NORMAL] = "normal",
-+ [PM_MODE_TEST] = "test",
-+};
-+
-+extern struct mutex pm_mutex;
-+extern struct kset power_subsys;
-+
-+static ssize_t control_show(struct kset *s, char *buf)
-+{
-+ return sprintf(buf, "%s\n", pm_states[olpc_pm_mode]);
-+}
-+
-+static ssize_t control_store(struct kset *s, const char *buf, size_t n)
-+{
-+ int i, len;
-+ char *p;
-+
-+ p = memchr(buf, '\n', n);
-+ len = p ? p - buf : n;
-+
-+ /* Grab the mutex */
-+ mutex_lock(&pm_mutex);
-+
-+ for(i = 0; i < PM_MODE_MAX; i++) {
-+ if (!strncmp(buf, pm_states[i], len)) {
-+ olpc_pm_mode = i;
-+ break;
-+ }
-+ }
-+
-+ mutex_unlock(&pm_mutex);
-+
-+ return (i == PM_MODE_MAX) ? -EINVAL : n;
-+}
-+
-+static struct subsys_attribute control_attr = {
-+ .attr = {
-+ .name = "olpc-pm",
-+ .mode = 0644,
-+ },
-+ .show = control_show,
-+ .store = control_store,
-+};
-+
-+static struct attribute * olpc_attributes[] = {
-+ &control_attr.attr,
-+ NULL
-+};
-+
-+static struct attribute_group olpc_attrs = {
-+ .attrs = olpc_attributes,
-+};
-+
-+static int __init alloc_inputdevs(void)
-+{
-+ int ret = -ENOMEM;
-+
-+ pm_inputdev = input_allocate_device();
-+ if (!pm_inputdev)
-+ goto err;
-+
-+ pm_inputdev->name = "OLPC PM";
-+ pm_inputdev->phys = "olpc_pm/input0";
-+ set_bit(EV_KEY, pm_inputdev->evbit);
-+ set_bit(KEY_POWER, pm_inputdev->keybit);
-+
-+ ret = input_register_device(pm_inputdev);
-+ if (ret) {
-+ printk(KERN_ERR "olpc-pm: failed to register PM input device: %d\n", ret);
-+ goto err;
-+ }
-+
-+ lid_inputdev = input_allocate_device();
-+ if (!lid_inputdev)
-+ goto err;
-+
-+ lid_inputdev->name = "OLPC lid switch";
-+ lid_inputdev->phys = "olpc_pm/input1";
-+ set_bit(EV_SW, lid_inputdev->evbit);
-+ set_bit(SW_LID, lid_inputdev->swbit);
-+
-+ ret = input_register_device(lid_inputdev);
-+ if (ret) {
-+ printk(KERN_ERR "olpc-pm: failed to register lid input device: %d\n", ret);
-+ goto err;
-+ }
-+
-+ ebook_inputdev = input_allocate_device();
-+ if (!ebook_inputdev)
-+ goto err;
-+
-+ ebook_inputdev->name = "OLPC ebook switch";
-+ ebook_inputdev->phys = "olpc_pm/input2";
-+ set_bit(EV_SW, ebook_inputdev->evbit);
-+ set_bit(SW_TABLET_MODE, ebook_inputdev->swbit);
-+
-+ ret = input_register_device(ebook_inputdev);
-+ if (ret) {
-+ printk(KERN_ERR "olpc-pm: failed to register ebook input device: %d\n", ret);
-+ goto err;
-+ }
-+
-+ return ret;
-+err:
-+ if (ebook_inputdev) {
-+ input_unregister_device(ebook_inputdev);
-+ ebook_inputdev = NULL;
-+ }
-+ if (lid_inputdev) {
-+ input_unregister_device(lid_inputdev);
-+ lid_inputdev = NULL;
-+ }
-+ if (pm_inputdev) {
-+ input_unregister_device(pm_inputdev);
-+ pm_inputdev = NULL;
-+ }
-+
-+ return ret;
-+}
-+
-+static int __init olpc_pm_init(void)
-+{
-+ uint32_t lo, hi;
-+ int ret;
-+ uint8_t ec_byte;
-+
-+ if (!machine_is_olpc())
-+ return -ENODEV;
-+
-+ acpi_base = geode_acpi_base();
-+ pms_base = geode_pms_base();
-+
-+ if (!acpi_base || !pms_base)
-+ return -ENODEV;
-+
-+ ret = alloc_inputdevs();
-+ if (ret)
-+ return ret;
-+
-+ rdmsr(0x51400020, lo, hi);
-+ sci_irq = (lo >> 20) & 15;
-+
-+ if (sci_irq) {
-+ printk(KERN_INFO "SCI is mapped to IRQ %d\n", sci_irq);
-+ } else {
-+ /* Zero doesn't mean zero -- it means masked */
-+ printk(KERN_INFO "SCI unmapped. Mapping to IRQ 3\n");
-+ sci_irq = 3;
-+ lo |= 0x00300000;
-+ wrmsrl(0x51400020, lo);
-+ }
-+
-+ olpc_fixup_bios();
-+
-+ lo = inl(pms_base + PM_FSD);
-+
-+ /* Lock, enable failsafe, 4 seconds */
-+ outl(0xc001f400, pms_base + PM_FSD);
-+
-+ /* Here we set up the SCI events we're interested in during
-+ * real-time. We have no sleep button, and the RTC doesn't make
-+ * sense, so set up the power button
-+ */
-+
-+ outl(inl(acpi_base) | ((CS5536_PM_PWRBTN) << 16), acpi_base);
-+
-+ if (olpc_get_rev() >= OLPC_REV_B2) {
-+ gpio_wake_events |= GPIO_WAKEUP_LID;
-+
-+ /* Get the current value of the GPIO, and set up the edges */
-+ olpc_lid_flag = geode_gpio_isset(OLPC_GPIO_LID, GPIO_READ_BACK);
-+
-+ /* Watch for the opposite edge */
-+
-+ if (olpc_lid_flag)
-+ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
-+ else
-+ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
-+
-+ /* Enable the event */
-+ geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
-+ }
-+
-+ /* Set up the mask for wakeups the EC will generate SCIs on */
-+
-+ ret = olpc_ec_cmd(EC_READ_SCI_MASK, NULL, 0, &ec_byte, 1);
-+ if (ret)
-+ printk(KERN_ERR "Error getting the EC SCI mask: %d\n", ret);
-+
-+ /* Disable battery 1% charge wakeups */
-+ ec_byte &= ~EC_SCI_SRC_BATSOC;
-+
-+ ret = olpc_ec_cmd(EC_WRITE_SCI_MASK, &ec_byte, 1, NULL, 0);
-+ if (ret)
-+ printk(KERN_ERR "Error setting the EC SCI mask: %d\n", ret);
-+
-+ /* Set up the EC SCI */
-+
-+ gpio_wake_events |= GPIO_WAKEUP_EC;
-+
-+ outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
-+ outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
-+
-+ /* Select level triggered in PIC */
-+
-+ if (sci_irq < 8) {
-+ lo = inb(0x4d0);
-+ lo |= 1 << sci_irq;
-+ outb(lo, 0x4d0);
-+ } else {
-+ lo = inb(0x4d1);
-+ lo |= 1 << (sci_irq - 8);
-+ outb(lo, 0x4d1);
-+ }
-+ /* Clear pending interrupt */
-+ outl(inl(acpi_base) | 0xFFFF, acpi_base);
-+ process_sci_queue(0); /* we just want to flush the queue here */
-+ init_ebook_state();
-+
-+ /* Enable the interrupt */
-+
-+ ret = request_irq(sci_irq, &olpc_pm_interrupt, 0, "SCI", &acpi_base);
-+
-+ if (ret) {
-+ printk(KERN_ERR "Error registering SCI: %d\n", ret);
-+ return ret;
-+ }
-+
-+ ofw_bios_entry.address = 0xF0000 + PAGE_OFFSET;
-+ pm_set_ops(&olpc_pm_ops);
-+
-+ sysfs_create_group(&power_subsys.kobj, &olpc_attrs);
-+
-+ return 0;
-+}
-+
-+
-+#if defined (CONFIG_RTC_DRV_CMOS) || defined (CONFIG_RTC_DRV_CMOS_MODULE)
-+struct resource rtc_platform_resource[2] = {
-+ {
-+ .flags = IORESOURCE_IO,
-+ .start = RTC_PORT(0),
-+ .end = RTC_PORT(0) + RTC_IO_EXTENT
-+ },
-+ {
-+ .flags = IORESOURCE_IRQ,
-+ .start = 8,
-+ .end = 8,
-+ },
-+};
-+
-+
-+static void rtc_wake_on(struct device *dev)
-+{
-+ olpc_wakeup_mask |= CS5536_PM_RTC;
-+}
-+
-+static void rtc_wake_off(struct device *dev)
-+{
-+ olpc_wakeup_mask &= ~(CS5536_PM_RTC);
-+}
-+
-+static struct cmos_rtc_board_info rtc_info = {
-+ .rtc_day_alarm = 0,
-+ .rtc_mon_alarm = 0,
-+ .rtc_century = 0,
-+ .wake_on = rtc_wake_on,
-+ .wake_off = rtc_wake_off,
-+};
-+
-+struct platform_device olpc_rtc_device = {
-+ .name = "rtc_cmos",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(rtc_platform_resource),
-+ .dev.platform_data = &rtc_info,
-+ .resource = rtc_platform_resource,
-+};
-+
-+static int __init olpc_platform_init(void)
-+{
-+ (void)platform_device_register(&olpc_rtc_device);
-+ device_init_wakeup(&olpc_rtc_device.dev, 1);
-+
-+ (void)platform_device_register(&olpc_powerbutton_dev);
-+ device_init_wakeup(&olpc_powerbutton_dev.dev, 1);
-+
-+ (void)platform_device_register(&olpc_lid_dev);
-+ device_init_wakeup(&olpc_lid_dev.dev, 1);
-+
-+ return 0;
-+}
-+arch_initcall(olpc_platform_init);
-+#endif /* CONFIG_RTC_DRV_CMOS */
-+
-+static void olpc_pm_exit(void)
-+{
-+ /* Clear any pending events, and disable them */
-+ outl(0xFFFF, acpi_base+2);
-+
-+ free_irq(sci_irq, &acpi_base);
-+ input_unregister_device(pm_inputdev);
-+ input_unregister_device(lid_inputdev);
-+ input_unregister_device(ebook_inputdev);
-+}
-+
-+static struct pm_ops olpc_pm_ops = {
-+ .valid = olpc_pm_state_valid,
-+ .enter = olpc_pm_enter,
-+};
-+
-+module_init(olpc_pm_init);
-+module_exit(olpc_pm_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
-+MODULE_DESCRIPTION("AMD Geode power management for OLPC CL1");
-diff --git a/arch/i386/kernel/olpc-sleep.S b/arch/i386/kernel/olpc-sleep.S
-new file mode 100644
-index 0000000..9535c9a
---- /dev/null
-+++ b/arch/i386/kernel/olpc-sleep.S
-@@ -0,0 +1,39 @@
-+.text
-+
-+ENTRY(olpc_sleep_asm)
-+olpc_sleep:
-+ ;; Get the value of PM1_CNT and store it off
-+
-+ add 08h, ax
-+ mov bx,dx
-+ in dx,eax
-+ or 2000h, ax
-+ mov ax,di
-+
-+ ;; flush the cache
-+ wbinvd
-+
-+ ;; GX2 must disable refresh before going into self-refresh
-+ mov 2000000180xh, ecx
-+ rdmsr
-+ mov eax, esi
-+ and 0FF0000FFh, eax
-+ wrmsr
-+
-+ ;; Now, put the memory into self refresh
-+ mov 2004, cx
-+ xor edx, edx
-+ xor eax, eax
-+ mov 04h, al
-+ wrmsr
-+
-+ ;; Thats all she wrote - time to go to sleep
-+
-+ mov bx, dx
-+ movzx di, eax
-+ out eax, dx
-+
-+ ;;
-+
-+
-+
-diff --git a/arch/i386/kernel/olpc-wakeup.S b/arch/i386/kernel/olpc-wakeup.S
-new file mode 100644
-index 0000000..a92cc61
---- /dev/null
-+++ b/arch/i386/kernel/olpc-wakeup.S
-@@ -0,0 +1,122 @@
-+.text
-+#include <linux/linkage.h>
-+#include <asm/segment.h>
-+#include <asm/page.h>
-+
-+ALIGN
-+ .align 4096
-+
-+wakeup_start:
-+# jmp wakeup_start
-+
-+ cli
-+ cld
-+
-+ # Clear any dangerous flags
-+
-+ pushl $0
-+ popfl
-+
-+ # Set up %cr3
-+ movl $swsusp_pg_dir - __PAGE_OFFSET, %eax
-+ movl %eax, %cr3
-+
-+ movl saved_cr4, %eax
-+ movl %eax, %cr4
-+
-+ movl saved_cr0, %eax
-+ movl %eax, %cr0
-+
-+ jmp 1f
-+1:
-+ ljmpl $__KERNEL_CS,$wakeup_return
-+
-+
-+.org 0x1000
-+
-+wakeup_return:
-+ movw $__KERNEL_DS, %ax
-+ movw %ax, %ss
-+ movw %ax, %ds
-+ movw %ax, %es
-+ movw %ax, %fs
-+ movw %ax, %gs
-+
-+ lgdt saved_gdt
-+ lidt saved_idt
-+ lldt saved_ldt
-+ ljmp $(__KERNEL_CS),$1f
-+1:
-+ movl %cr3, %eax
-+ movl %eax, %cr3
-+ wbinvd
-+
-+ # Go back to the return point
-+ jmp ret_point
-+
-+save_registers:
-+ sgdt saved_gdt
-+ sidt saved_idt
-+ sldt saved_ldt
-+
-+ pushl %edx
-+ movl %cr4, %edx
-+ movl %edx, saved_cr4
-+
-+ movl %cr0, %edx
-+ movl %edx, saved_cr0
-+
-+ popl %edx
-+
-+
-+ movl %ebx, saved_context_ebx
-+ movl %ebp, saved_context_ebp
-+ movl %esi, saved_context_esi
-+ movl %edi, saved_context_edi
-+
-+ pushfl
-+ popl saved_context_eflags
-+
-+ ret
-+
-+
-+restore_registers:
-+ movl saved_context_ebp, %ebp
-+ movl saved_context_ebx, %ebx
-+ movl saved_context_esi, %esi
-+ movl saved_context_edi, %edi
-+
-+ pushl saved_context_eflags
-+ popfl
-+
-+ ret
-+
-+
-+ENTRY(do_olpc_suspend_lowlevel)
-+ call save_processor_state
-+ call save_registers
-+
-+ # This is the stack context we want to remember
-+ movl %esp, saved_context_esp
-+
-+ pushl $3
-+ call olpc_do_sleep
-+
-+ jmp wakeup_start
-+ .p2align 4,,7
-+ret_point:
-+ movl saved_context_esp, %esp
-+
-+ call restore_registers
-+ call restore_processor_state
-+ ret
-+
-+.data
-+ALIGN
-+
-+saved_gdt: .long 0,0
-+saved_idt: .long 0,0
-+saved_ldt: .long 0
-+saved_cr4: .long 0
-+saved_cr0: .long 0
-+
-diff --git a/arch/i386/kernel/olpc.c b/arch/i386/kernel/olpc.c
-new file mode 100644
-index 0000000..d540cb0
---- /dev/null
-+++ b/arch/i386/kernel/olpc.c
-@@ -0,0 +1,320 @@
-+/* Support for the OLPC DCON and OLPC EC access
-+ * Copyright (C) 2006, Advanced Micro Devices, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/autoconf.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/mc146818rtc.h>
-+#include <linux/delay.h>
-+#include <linux/spinlock.h>
-+
-+#include <asm/olpc.h>
-+#include <asm/ofw.h>
-+
-+/* This is our new multi-purpose structure used to contain the
-+ * information about the platform that we detect
-+ */
-+
-+struct olpc_platform_t olpc_platform_info;
-+EXPORT_SYMBOL_GPL(olpc_platform_info);
-+
-+/*********************************************************************
-+ * EC locking and access
-+ *********************************************************************/
-+
-+static DEFINE_SPINLOCK(ec_lock);
-+
-+/* what the timeout *should* be (in ms) */
-+#define EC_BASE_TIMEOUT 20
-+
-+/* the timeout that bugs in the EC might force us to actually use */
-+static int ec_timeout = EC_BASE_TIMEOUT;
-+
-+static int __init olpc_ec_timeout_set(char *str)
-+{
-+ if (get_option(&str, &ec_timeout) != 1) {
-+ ec_timeout = EC_BASE_TIMEOUT;
-+ printk(KERN_ERR "olpc-ec: invalid argument to "
-+ "'olpc_ec_timeout=', ignoring!\n");
-+ }
-+ printk(KERN_DEBUG "olpc-ec: using %d ms delay for EC commands.\n",
-+ ec_timeout);
-+ return 1;
-+}
-+__setup("olpc_ec_timeout=", olpc_ec_timeout_set);
-+
-+/*
-+ * These *bf_status functions return whether the buffers are full or not.
-+ */
-+
-+static inline unsigned int ibf_status(unsigned int port)
-+{
-+ return inb(port) & 0x02;
-+}
-+
-+static inline unsigned int obf_status(unsigned int port)
-+{
-+ return inb(port) & 0x01;
-+}
-+
-+#define wait_on_ibf(p, d) __wait_on_ibf(__LINE__, (p), (d))
-+static int __wait_on_ibf(unsigned int line, unsigned int port, int desired)
-+{
-+ unsigned int timeo;
-+ int state = ibf_status(port);
-+
-+ for (timeo = ec_timeout; state != desired && timeo; timeo--) {
-+ mdelay(1);
-+ state = ibf_status(port);
-+ }
-+
-+ if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
-+ timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
-+ printk(KERN_WARNING "olpc-ec: waited %u ms for IBF (%d)!\n",
-+ EC_BASE_TIMEOUT-timeo, line);
-+ }
-+
-+ return !(state == desired);
-+}
-+
-+#define wait_on_obf(p, d) __wait_on_obf(__LINE__, (p), (d))
-+static int __wait_on_obf(unsigned int line, unsigned int port, int desired)
-+{
-+ unsigned int timeo;
-+ int state = obf_status(port);
-+
-+ for (timeo = ec_timeout; state != desired && timeo; timeo--) {
-+ mdelay(1);
-+ state = obf_status(port);
-+ }
-+
-+ if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
-+ timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
-+ printk(KERN_WARNING "olpc-ec: waited %u ms for OBF (%d)!\n",
-+ EC_BASE_TIMEOUT-timeo, line);
-+ }
-+
-+ return !(state == desired);
-+}
-+
-+int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
-+ unsigned char *outbuf, size_t outlen)
-+{
-+ unsigned long flags;
-+ int ret = -EIO;
-+ int i;
-+
-+ spin_lock_irqsave(&ec_lock, flags);
-+
-+ if (wait_on_ibf(0x6c, 0)) {
-+ printk(KERN_ERR "olpc-ec: timeout waiting for EC to "
-+ "quiesce!\n");
-+ goto err;
-+ }
-+
-+restart:
-+ /*
-+ * Note that if we time out during any IBF checks, that's a failure;
-+ * we have to return. There's no way for the kernel to clear that.
-+ *
-+ * If we time out during an OBF check, we can restart the command;
-+ * reissuing it will clear the OBF flag, and we should be alright.
-+ * The OBF flag will sometimes misbehave due to what we believe
-+ * is a hardware quirk..
-+ */
-+ printk(KERN_DEBUG "olpc-ec: running cmd 0x%x\n", cmd);
-+ outb(cmd, 0x6c);
-+
-+ if (wait_on_ibf(0x6c, 0)) {
-+ printk(KERN_ERR "olpc-ec: timeout waiting for EC to read "
-+ "command!\n");
-+ goto err;
-+ }
-+
-+ if (inbuf && inlen) {
-+ /* write data to EC */
-+ for (i = 0; i < inlen; i++) {
-+ if (wait_on_ibf(0x6c, 0)) {
-+ printk(KERN_ERR "olpc-ec: timeout waiting for"
-+ " EC accept data!\n");
-+ goto err;
-+ }
-+ printk(KERN_DEBUG "olpc-ec: sending cmd arg 0x%x\n",
-+ inbuf[i]);
-+ outb(inbuf[i], 0x68);
-+ }
-+ }
-+ if (outbuf && outlen) {
-+ /* read data from EC */
-+ for (i = 0; i < outlen; i++) {
-+ if (wait_on_obf(0x6c, 1)) {
-+ printk(KERN_ERR "olpc-ec: timeout waiting for"
-+ " EC to provide data!\n");
-+ goto restart;
-+ }
-+ outbuf[i] = inb(0x68);
-+ printk(KERN_DEBUG "olpc-ec: received 0x%x\n",
-+ outbuf[i]);
-+ }
-+ }
-+
-+ ret = 0;
-+err:
-+ spin_unlock_irqrestore(&ec_lock, flags);
-+ return ret;
-+}
-+EXPORT_SYMBOL_GPL(olpc_ec_cmd);
-+
-+/*********************************************************************
-+ * DCON stuff
-+ *********************************************************************/
-+
-+static void olpc_power_off(void)
-+{
-+ printk(KERN_INFO "OLPC power off sequence...\n");
-+ outb(0xff, 0x381);
-+ outb(0x14, 0x382);
-+ outb(0x01, 0x383);
-+ outb(0xff, 0x381);
-+ outb(0x14, 0x382);
-+ outb(0x00, 0x383);
-+}
-+
-+static void __init
-+ec_detect(void)
-+{
-+ olpc_ec_cmd(0x08, NULL, 0, (unsigned char *) &olpc_platform_info.ecver, 1);
-+}
-+
-+/* Check to see if this version of the OLPC board has VSA built
-+ * in, and set a flag
-+ */
-+
-+static void __init vsa_detect(void)
-+{
-+ u16 rev;
-+
-+ outw(0xFC53, 0xAC1C);
-+ outw(0x0003, 0xAC1C);
-+
-+ rev = inw(0xAC1E);
-+
-+ if (rev == 0x4132)
-+ olpc_platform_info.flags |= OLPC_F_VSA;
-+}
-+
-+/* Map OFW revisions to what OLPC_REV_* */
-+static const char __initdata *olpc_boardrev_str[] = {
-+ "A1",
-+ "preB1",
-+ "B1",
-+ "preB2",
-+ "B2",
-+ "preB3",
-+ "B3",
-+ "B4",
-+ "C1",
-+ "R1",
-+};
-+
-+static void __init platform_detect(char *revision, size_t len)
-+{
-+ size_t propsize;
-+ int i;
-+
-+ BUG_ON(ARRAY_SIZE(olpc_boardrev_str) != OLPC_REV_UNKNOWN);
-+
-+ if (ofw("getprop", 4, 1, NULL, "model", revision, len, &propsize)) {
-+ printk(KERN_ERR "ofw: getprop call failed!\n");
-+ goto failed;
-+ }
-+ if (len < propsize) {
-+ printk(KERN_ERR "ofw: revision string is too long!\n");
-+ goto failed;
-+ }
-+
-+ for (i=0; i < ARRAY_SIZE(olpc_boardrev_str); i++) {
-+ if (strcmp(revision, olpc_boardrev_str[i]) == 0) {
-+ olpc_platform_info.boardrev = i;
-+ return;
-+ }
-+ }
-+
-+failed:
-+ strncpy(revision, "Unknown", len);
-+ olpc_platform_info.boardrev = OLPC_REV_UNKNOWN;
-+}
-+
-+static int olpc_dcon_present = -1;
-+module_param(olpc_dcon_present, int, 0444);
-+
-+/* REV_A CMOS map:
-+ * bit 440; DCON present bit
-+ */
-+
-+#define OLPC_CMOS_DCON_OFFSET (440 / 8)
-+#define OLPC_CMOS_DCON_MASK 0x01
-+
-+static int __init olpc_init(void)
-+{
-+ unsigned char *romsig;
-+ char revision[10];
-+
-+ spin_lock_init(&ec_lock);
-+
-+ romsig = ioremap(0xffffffc0, 16);
-+
-+ if (!romsig)
-+ return 0;
-+
-+ if (strncmp(romsig, "CL1 Q", 7))
-+ goto unmap;
-+ if (strncmp(romsig+6, romsig+13, 3)) {
-+ printk(KERN_INFO "OLPC BIOS signature looks invalid. Assuming not OLPC\n");
-+ goto unmap;
-+ }
-+ printk(KERN_INFO "OLPC board with OpenFirmware: %.16s\n", romsig);
-+
-+ olpc_platform_info.flags |= OLPC_F_PRESENT;
-+
-+ pm_power_off = olpc_power_off;
-+
-+ /* Get the platform revision */
-+ platform_detect(revision, sizeof(revision));
-+
-+ /* If olpc_dcon_present isn't set by the command line, then
-+ * "detect" it
-+ */
-+
-+ if (olpc_dcon_present == -1) {
-+ /* B1 and greater always has a DCON */
-+ if (olpc_platform_info.boardrev >= OLPC_REV_B1 &&
-+ olpc_platform_info.boardrev < OLPC_REV_UNKNOWN)
-+ olpc_dcon_present = 1;
-+ }
-+
-+ if (olpc_dcon_present)
-+ olpc_platform_info.flags |= OLPC_F_DCON;
-+
-+ /* Get the EC revision */
-+ ec_detect();
-+
-+ /* Check to see if the VSA exists */
-+ vsa_detect();
-+
-+ printk(KERN_INFO "OLPC board revision: %s (EC=%x)\n", revision,
-+ olpc_platform_info.ecver);
-+
-+ unmap:
-+ iounmap(romsig);
-+
-+ return 0;
-+}
-+
-+postcore_initcall(olpc_init);
-diff --git a/arch/i386/kernel/prom.c b/arch/i386/kernel/prom.c
-new file mode 100644
-index 0000000..d64bb27
---- /dev/null
-+++ b/arch/i386/kernel/prom.c
-@@ -0,0 +1,478 @@
-+/*
-+ * Procedures for creating, accessing and interpreting the device tree.
-+ *
-+ * Paul Mackerras August 1996.
-+ * Copyright (C) 1996-2005 Paul Mackerras.
-+ *
-+ * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
-+ * {engebret|bergner}@us.ibm.com
-+ *
-+ * Adapted for sparc64 by David S. Miller davem@davemloft.net
-+ *
-+ * Adapter for i386/OLPC by Andres Salomon <dilinger@debian.org>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/bootmem.h>
-+#include <linux/module.h>
-+#include <asm/prom.h>
-+#include <asm/ofw.h>
-+
-+/*
-+ * XXX: This is very much a stub; right now we're keeping 2 device trees
-+ * in memory (one for promfs, and one here). That will not remain
-+ * for long!
-+ */
-+
-+static struct device_node *allnodes;
-+
-+/* use when traversing tree through the allnext, child, sibling,
-+ * or parent members of struct device_node.
-+ */
-+static DEFINE_RWLOCK(devtree_lock);
-+
-+int of_device_is_compatible(const struct device_node *device,
-+ const char *compat)
-+{
-+ const char* cp;
-+ int cplen, l;
-+
-+ cp = of_get_property(device, "compatible", &cplen);
-+ if (cp == NULL)
-+ return 0;
-+ while (cplen > 0) {
-+ if (strncmp(cp, compat, strlen(compat)) == 0)
-+ return 1;
-+ l = strlen(cp) + 1;
-+ cp += l;
-+ cplen -= l;
-+ }
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(of_device_is_compatible);
-+
-+struct device_node *of_get_parent(const struct device_node *node)
-+{
-+ struct device_node *np;
-+
-+ if (!node)
-+ return NULL;
-+
-+ np = node->parent;
-+
-+ return np;
-+}
-+EXPORT_SYMBOL(of_get_parent);
-+
-+struct device_node *of_get_next_child(const struct device_node *node,
-+ struct device_node *prev)
-+{
-+ struct device_node *next;
-+
-+ next = prev ? prev->sibling : node->child;
-+ for (; next != 0; next = next->sibling) {
-+ break;
-+ }
-+
-+ return next;
-+}
-+EXPORT_SYMBOL(of_get_next_child);
-+
-+struct device_node *of_find_node_by_path(const char *path)
-+{
-+ struct device_node *np = allnodes;
-+
-+ for (; np != 0; np = np->allnext) {
-+ if (np->full_name != 0 && strcmp(np->full_name, path) == 0)
-+ break;
-+ }
-+
-+ return np;
-+}
-+EXPORT_SYMBOL(of_find_node_by_path);
-+
-+struct device_node *of_find_node_by_phandle(phandle handle)
-+{
-+ struct device_node *np;
-+
-+ for (np = allnodes; np != 0; np = np->allnext)
-+ if (np->node == handle)
-+ break;
-+
-+ return np;
-+}
-+EXPORT_SYMBOL(of_find_node_by_phandle);
-+
-+struct device_node *of_find_node_by_name(struct device_node *from,
-+ const char *name)
-+{
-+ struct device_node *np;
-+
-+ np = from ? from->allnext : allnodes;
-+ for (; np != NULL; np = np->allnext)
-+ if (np->name != NULL && strcmp(np->name, name) == 0)
-+ break;
-+
-+ return np;
-+}
-+EXPORT_SYMBOL(of_find_node_by_name);
-+
-+struct device_node *of_find_node_by_type(struct device_node *from,
-+ const char *type)
-+{
-+ struct device_node *np;
-+
-+ np = from ? from->allnext : allnodes;
-+ for (; np != 0; np = np->allnext)
-+ if (np->type != 0 && strcmp(np->type, type) == 0)
-+ break;
-+
-+ return np;
-+}
-+EXPORT_SYMBOL(of_find_node_by_type);
-+
-+struct device_node *of_find_compatible_node(struct device_node *from,
-+ const char *type, const char *compatible)
-+{
-+ struct device_node *np;
-+
-+ np = from ? from->allnext : allnodes;
-+ for (; np != 0; np = np->allnext) {
-+ if (type != NULL
-+ && !(np->type != 0 && strcmp(np->type, type) == 0))
-+ continue;
-+ if (of_device_is_compatible(np, compatible))
-+ break;
-+ }
-+
-+ return np;
-+}
-+EXPORT_SYMBOL(of_find_compatible_node);
-+
-+struct property *of_find_property(const struct device_node *np,
-+ const char *name,
-+ int *lenp)
-+{
-+ struct property *pp;
-+
-+ for (pp = np->properties; pp != 0; pp = pp->next) {
-+ if (strcasecmp(pp->name, name) == 0) {
-+ if (lenp != 0)
-+ *lenp = pp->length;
-+ break;
-+ }
-+ }
-+ return pp;
-+}
-+EXPORT_SYMBOL(of_find_property);
-+
-+/*
-+ * Find a property with a given name for a given node
-+ * and return the value.
-+ */
-+const void *of_get_property(const struct device_node *np, const char *name,
-+ int *lenp)
-+{
-+ struct property *pp = of_find_property(np,name,lenp);
-+ return pp ? pp->value : NULL;
-+}
-+EXPORT_SYMBOL(of_get_property);
-+
-+int of_getintprop_default(struct device_node *np, const char *name, int def)
-+{
-+ struct property *prop;
-+ int len;
-+
-+ prop = of_find_property(np, name, &len);
-+ if (!prop || len != 4)
-+ return def;
-+
-+ return *(int *) prop->value;
-+}
-+EXPORT_SYMBOL(of_getintprop_default);
-+
-+int of_n_addr_cells(struct device_node *np)
-+{
-+ const int* ip;
-+ do {
-+ if (np->parent)
-+ np = np->parent;
-+ ip = of_get_property(np, "#address-cells", NULL);
-+ if (ip != NULL)
-+ return *ip;
-+ } while (np->parent);
-+ /* No #address-cells property for the root node, default to 2 */
-+ return 2;
-+}
-+EXPORT_SYMBOL(of_n_addr_cells);
-+
-+int of_n_size_cells(struct device_node *np)
-+{
-+ const int* ip;
-+ do {
-+ if (np->parent)
-+ np = np->parent;
-+ ip = of_get_property(np, "#size-cells", NULL);
-+ if (ip != NULL)
-+ return *ip;
-+ } while (np->parent);
-+ /* No #size-cells property for the root node, default to 1 */
-+ return 1;
-+}
-+EXPORT_SYMBOL(of_n_size_cells);
-+
-+int of_set_property(struct device_node *dp, const char *name, void *val, int len)
-+{
-+ return -EIO;
-+}
-+EXPORT_SYMBOL(of_set_property);
-+
-+static unsigned int prom_early_allocated;
-+
-+static void * __init prom_early_alloc(unsigned long size)
-+{
-+ void *ret;
-+
-+ ret = kmalloc(size, GFP_KERNEL);
-+ if (ret != NULL)
-+ memset(ret, 0, size);
-+ else
-+ printk(KERN_ERR "ACK! couldn't allocate prom memory!\n");
-+
-+ prom_early_allocated += size;
-+
-+ return ret;
-+}
-+
-+static int is_root_node(const struct device_node *dp)
-+{
-+ if (!dp)
-+ return 0;
-+
-+ return (dp->parent == NULL);
-+}
-+
-+static char * __init build_path_component(struct device_node *dp)
-+{
-+ int pathlen;
-+ char *n, *i;
-+
-+ if (ofw("package-to-path", 3, 1, dp->node, NULL, 0, &pathlen)) {
-+ printk(KERN_ERR "PROM: unable to get path name from OFW!\n");
-+ return "ERROR";
-+ }
-+ n = prom_early_alloc(pathlen + 1);
-+ if (ofw("package-to-path", 3, 1, dp->node, n, pathlen+1, &pathlen))
-+ printk(KERN_ERR "PROM: unable to get path name from OFW\n");
-+
-+ if ((i = strrchr(n, '/')))
-+ n = ++i; /* we only want the file name */
-+ return n;
-+}
-+
-+static char * __init build_full_name(struct device_node *dp)
-+{
-+ int len, ourlen, plen;
-+ char *n;
-+
-+ plen = strlen(dp->parent->full_name);
-+ ourlen = strlen(dp->path_component_name);
-+ len = ourlen + plen + 2;
-+
-+ n = prom_early_alloc(len);
-+ strcpy(n, dp->parent->full_name);
-+ if (!is_root_node(dp->parent)) {
-+ strcpy(n + plen, "/");
-+ plen++;
-+ }
-+ strcpy(n + plen, dp->path_component_name);
-+
-+ return n;
-+}
-+
-+static struct property * __init build_one_prop(phandle node, char *prev, char *special_name, void *special_val, int special_len)
-+{
-+ static struct property *tmp = NULL;
-+ struct property *p;
-+
-+ if (tmp) {
-+ p = tmp;
-+ memset(p, 0, sizeof(*p) + 32);
-+ tmp = NULL;
-+ } else {
-+ p = prom_early_alloc(sizeof(struct property) + 32);
-+ }
-+
-+ p->name = (char *) (p + 1);
-+ if (special_name) {
-+ strcpy(p->name, special_name);
-+ p->length = special_len;
-+ p->value = prom_early_alloc(special_len);
-+ memcpy(p->value, special_val, special_len);
-+ } else {
-+ int fl;
-+ if (prev == NULL) {
-+ if (ofw("nextprop", 3, 1, node, "", p->name, &fl)) {
-+ printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__);
-+ return NULL;
-+ }
-+ } else {
-+ if (ofw("nextprop", 3, 1, node, prev, p->name, &fl)) {
-+ printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__);
-+ return NULL;
-+ }
-+ }
-+ if (strlen(p->name) == 0 || fl != 1) {
-+ tmp = p;
-+ return NULL;
-+ }
-+ if (ofw("getproplen", 2, 1, node, p->name, &p->length)) {
-+ printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__);
-+ return NULL;
-+ }
-+ if (p->length <= 0) {
-+ p->length = 0;
-+ } else {
-+ p->value = prom_early_alloc(p->length + 1);
-+ if (ofw("getprop", 4, 1, node, p->name, p->value, p->length, &p->length)) {
-+ printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__);
-+ return NULL;
-+ }
-+ ((unsigned char *)p->value)[p->length] = '\0';
-+ }
-+ }
-+ return p;
-+}
-+
-+static struct property * __init build_prop_list(phandle node)
-+{
-+ struct property *head, *tail;
-+
-+ head = tail = build_one_prop(node, NULL,
-+ ".node", &node, sizeof(node));
-+
-+ tail->next = build_one_prop(node, NULL, NULL, NULL, 0);
-+ tail = tail->next;
-+ while(tail) {
-+ tail->next = build_one_prop(node, tail->name,
-+ NULL, NULL, 0);
-+ tail = tail->next;
-+ }
-+
-+ return head;
-+}
-+
-+static char * __init get_one_property(phandle node, const char *name)
-+{
-+ char *buf = "<NULL>";
-+ int len;
-+
-+ if (ofw("getproplen", 2, 1, node, name, &len)) {
-+ printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__);
-+ return NULL;
-+ }
-+ if (len > 0) {
-+ buf = prom_early_alloc(len);
-+ if (ofw("getprop", 4, 1, node, name, buf, len, &len)) {
-+ printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__);
-+ return NULL;
-+ }
-+ }
-+
-+ return buf;
-+}
-+
-+static struct device_node * __init create_node(phandle node, struct device_node *parent)
-+{
-+ struct device_node *dp;
-+
-+ if (!node)
-+ return NULL;
-+
-+ dp = prom_early_alloc(sizeof(*dp));
-+ dp->parent = parent;
-+
-+ kref_init(&dp->kref);
-+
-+ dp->name = get_one_property(node, "name");
-+ dp->type = get_one_property(node, "device_type");
-+ dp->node = node;
-+
-+ dp->properties = build_prop_list(node);
-+
-+ return dp;
-+}
-+
-+static struct device_node * __init build_tree(struct device_node *parent, phandle node, struct device_node ***nextp)
-+{
-+ struct device_node *ret = NULL, *prev_sibling = NULL;
-+ struct device_node *dp;
-+ u32 child;
-+
-+ while (1) {
-+ dp = create_node(node, parent);
-+ if (!dp)
-+ break;
-+
-+ if (prev_sibling)
-+ prev_sibling->sibling = dp;
-+
-+ if (!ret)
-+ ret = dp;
-+ prev_sibling = dp;
-+
-+ *(*nextp) = dp;
-+ *nextp = &dp->allnext;
-+
-+ dp->path_component_name = build_path_component(dp);
-+ dp->full_name = build_full_name(dp);
-+
-+ if (ofw("child", 1, 1, node, &child)) {
-+ printk(KERN_ERR "PROM: %s: fetching child failed!\n", __func__);
-+ return NULL;
-+ }
-+ dp->child = build_tree(dp, child, nextp);
-+
-+ if (ofw("peer", 1, 1, node, &node)) {
-+ printk(KERN_ERR "PROM: %s: fetching peer failed!\n", __func__);
-+ return NULL;
-+ }
-+ }
-+
-+ return ret;
-+}
-+
-+static phandle root_node;
-+
-+void __init prom_build_devicetree(void)
-+{
-+ struct device_node **nextp;
-+ u32 child;
-+
-+ if (ofw("peer", 1, 1, 0, &root_node)) {
-+ printk(KERN_ERR "PROM: unable to get root node from OFW!\n");
-+ return;
-+ }
-+
-+ allnodes = create_node(root_node, NULL);
-+ allnodes->path_component_name = "";
-+ allnodes->full_name = "/";
-+
-+ nextp = &allnodes->allnext;
-+ if (ofw("child", 1, 1, allnodes->node, &child)) {
-+ printk(KERN_ERR "PROM: unable to get child node from OFW!\n");
-+ return;
-+ }
-+ allnodes->child = build_tree(allnodes, child, &nextp);
-+ printk("PROM: Built device tree with %u bytes of memory.\n",
-+ prom_early_allocated);
-+}
+
+
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index d474cd6..c4b26ba 100644
--- a/arch/i386/kernel/setup.c
@@ -7993,310 +235,6 @@ index 3de9f9b..0f5f7dd 100644
if (raw_pci_ops)
return 0;
#ifdef CONFIG_PCI_BIOS
-diff --git a/arch/i386/pci/olpc.c b/arch/i386/pci/olpc.c
-new file mode 100644
-index 0000000..1518d25
---- /dev/null
-+++ b/arch/i386/pci/olpc.c
-@@ -0,0 +1,298 @@
-+/*
-+ * olpcpci.c - Low-level PCI config space access for OLPC systems
-+ * without the VSA PCI virtualization software.
-+ *
-+ * The AMD Geode chipset (GX2 processor, cs5536 I/O companion device)
-+ * has some I/O functions (display, southbridge, sound, USB HCIs, etc)
-+ * that more or less behave like PCI devices, but the hardware doesn't
-+ * directly implement the PCI configuration space headers. AMD provides
-+ * "VSA" (Virtual System Architecture) software that emulates PCI config
-+ * space for these devices, by trapping I/O accesses to PCI config register
-+ * (CF8/CFC) and running some code in System Management Mode interrupt state.
-+ * On the OLPC platform, we don't want to use that VSA code because
-+ * (a) it slows down suspend/resume, and (b) recompiling it requires special
-+ * compilers that are hard to get. So instead of letting the complex VSA
-+ * code simulate the PCI config registers for the on-chip devices, we
-+ * just simulate them the easy way, by inserting the code into the
-+ * pci_write_config and pci_read_config path. Most of the config registers
-+ * are read-only anyway, so the bulk of the simulation is just table lookup.
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <asm/olpc.h>
-+#include <asm/geode.h>
-+#include "pci.h"
-+
-+static int is_lx;
-+
-+/*
-+ * In the tables below, the first two line (8 longwords) are the
-+ * size masks that are used when the higher level PCI code determines
-+ * the size of the region by writing ~0 to a base address register
-+ * and reading back the result.
-+ *
-+ * The following lines are the values that are read during normal
-+ * PCI config access cycles, i.e. not after just having written
-+ * ~0 to a base address register.
-+ */
-+
-+static const u32 lxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+
-+ 0x281022 , 0x2200005 , 0x6000021 , 0x80f808 , /* AMD Vendor ID */
-+ 0x0 , 0x0 , 0x0 , 0x0 , /* No virtual registers, hence no BAR for them */
-+ 0x0 , 0x0 , 0x0 , 0x28100b ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+};
-+
-+static const u32 gxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */
-+ 0xfffffffd , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+
-+ 0x28100b , 0x2200005 , 0x6000021 , 0x80f808 , /* NSC Vendor ID */
-+ 0xac1d , 0x0 , 0x0 , 0x0 , /* I/O BAR - base of virtual registers */
-+ 0x0 , 0x0 , 0x0 , 0x28100b ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+};
-+
-+static const u32 lxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */
-+ 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+
-+ 0x20811022 , 0x2200003 , 0x3000000 , 0x0 , /* AMD Vendor ID */
-+ 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */
-+ 0xfe00c000 , 0x0 , 0x0 , 0x30100b , /* VIP */
-+ 0x0 , 0x0 , 0x0 , 0x10e , /* INTA, IRQ14 for graphics accel */
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+};
-+
-+static const u32 gxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */
-+ 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+
-+ 0x30100b , 0x2200003 , 0x3000000 , 0x0 , /* NSC Vendor ID */
-+ 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */
-+ 0x0 , 0x0 , 0x0 , 0x30100b ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+};
-+
-+static const u32 aes_hdr[] = { /* dev 1 function 2 - devfn = 0xa */
-+ 0xffffc000 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+
-+ 0x20821022 , 0x2a00006 , 0x10100000 , 0x8 , /* NSC Vendor ID */
-+ 0xfe010000 , 0x0 , 0x0 , 0x0 , /* AES registers */
-+ 0x0 , 0x0 , 0x0 , 0x20821022 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+};
-+
-+
-+static const u32 isa_hdr[] = { /* dev f function 0 - devfn = 78 */
-+ 0xfffffff9 , 0xffffff01 , 0xffffffc1 , 0xffffffe1 ,
-+ 0xffffff81 , 0xffffffc1 , 0x0 , 0x0 ,
-+
-+ 0x20901022 , 0x2a00049 , 0x6010003 , 0x802000 ,
-+ 0x18b1 , 0x1001 , 0x1801 , 0x1881 , /* SMB-8 GPIO-256 MFGPT-64 IRQ-32 */
-+ 0x1401 , 0x1841 , 0x0 , 0x20901022 , /* PMS-128 ACPI-64 */
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0xaa5b , /* interrupt steering */
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+};
-+
-+static const u32 ac97_hdr[] = { /* dev f function 3 - devfn = 7b */
-+ 0xffffff81 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+
-+ 0x20931022 , 0x2a00041 , 0x4010001 , 0x0 ,
-+ 0x1481 , 0x0 , 0x0 , 0x0 , /* I/O BAR-128 */
-+ 0x0 , 0x0 , 0x0 , 0x20931022 ,
-+ 0x0 , 0x0 , 0x0 , 0x205 , /* IntB , IRQ5 */
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+};
-+
-+static const u32 ohci_hdr[] = { /* dev f function 4 - devfn = 7c */
-+ 0xfffff000 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+
-+ 0x20941022 , 0x2300006 , 0xc031002 , 0x0 ,
-+ 0xfe01a000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */
-+ 0x0 , 0x0 , 0x0 , 0x20941022 ,
-+ 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */
-+ 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+};
-+
-+static const u32 ehci_hdr[] = { /* dev f function 4 - devfn = 7d */
-+ 0xfffff000 , 0x0 , 0x0 , 0x0 ,
-+ 0x0 , 0x0 , 0x0 , 0x0 ,
-+
-+ 0x20951022 , 0x2300006 , 0xc032002 , 0x0 ,
-+ 0xfe01b000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */
-+ 0x0 , 0x0 , 0x0 , 0x20951022 ,
-+ 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */
-+ 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */
-+#if 0
-+ 0x1 , 0x40080000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */
-+#endif
-+ 0x01000001 , 0x00000000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */
-+ 0x2020 , 0x0 , 0x0 , 0x0 , /* (EHCI page 8) 60 SBRN (R/O), 61 FLADJ (R/W), PORTWAKECAP */
-+};
-+
-+static u32 ff_loc = ~0;
-+static u32 zero_loc = 0;
-+
-+static int bar_probing = 0; /* Set after a write of ~0 to a BAR */
-+
-+#define NB_SLOT 0x1 /* Northbridge - GX chip - Device 1 */
-+#define SB_SLOT 0xf /* Southbridge - CS5536 chip - Device F */
-+#define SIMULATED(bus, devfn) (((bus) == 0) && ((PCI_SLOT(devfn) == NB_SLOT) || (PCI_SLOT(devfn) == SB_SLOT)))
-+
-+static u32 *hdr_addr(const u32 *hdr, int reg)
-+{
-+ u32 addr;
-+
-+ /*
-+ * This is a little bit tricky. The header maps consist of
-+ * 0x20 bytes of size masks, followed by 0x70 bytes of header data.
-+ * In the normal case, when not probing a BAR's size, we want
-+ * to access the header data, so we add 0x20 to the reg offset,
-+ * thus skipping the size mask area.
-+ * In the BAR probing case, we want to access the size mask for
-+ * the BAR, so we subtract 0x10 (the config header offset for
-+ * BAR0), and don't skip the size mask area.
-+ */
-+
-+ addr = (u32)hdr + reg + (bar_probing ? -0x10 : 0x20);
-+
-+ bar_probing = 0;
-+ return (u32 *)addr;
-+}
-+
-+static int pci_olpc_read(unsigned int seg, unsigned int bus,
-+ unsigned int devfn, int reg, int len, u32 *value)
-+{
-+ u32 *addr;
-+
-+ /* Use the hardware mechanism for non-simulated devices */
-+ if (!SIMULATED(bus, devfn))
-+ return pci_conf1_read(seg, bus, devfn, reg, len, value);
-+
-+ /*
-+ * No device has config registers past 0x70, so we save table space
-+ * by not storing entries for the nonexistent registers
-+ */
-+ if (reg >= 0x70)
-+ addr = &zero_loc;
-+ else {
-+ switch (devfn) {
-+ case 0x8:
-+ addr = hdr_addr(is_lx ? lxnb_hdr : gxnb_hdr, reg);
-+ break;
-+ case 0x9:
-+ addr = hdr_addr(is_lx ? lxfb_hdr : gxfb_hdr, reg);
-+ break;
-+ case 0xa:
-+ addr = is_lx ? hdr_addr(aes_hdr, reg) : &ff_loc;
-+ break;
-+ case 0x78:
-+ addr = hdr_addr(isa_hdr, reg);
-+ break;
-+ case 0x7b:
-+ addr = hdr_addr(ac97_hdr, reg);
-+ break;
-+ case 0x7c:
-+ addr = hdr_addr(ohci_hdr, reg);
-+ break;
-+ case 0x7d:
-+ addr = hdr_addr(ehci_hdr, reg);
-+ break;
-+ default:
-+ addr = &ff_loc;
-+ break;
-+ }
-+ }
-+ switch (len) {
-+ case 1:
-+ *value = *(u8 *) addr;
-+ break;
-+ case 2:
-+ *value = *(u16 *) addr;
-+ break;
-+ case 4:
-+ *value = *addr;
-+ break;
-+ default:
-+ BUG();
-+ }
-+
-+ return 0;
-+}
-+
-+static int pci_olpc_write(unsigned int seg, unsigned int bus,
-+ unsigned int devfn, int reg, int len, u32 value)
-+{
-+ /* Use the hardware mechanism for non-simulated devices */
-+ if (!SIMULATED(bus, devfn))
-+ return pci_conf1_write(seg, bus, devfn, reg, len, value);
-+
-+ /* XXX we may want to extend this to simulate EHCI power management */
-+
-+ /*
-+ * Mostly we just discard writes, but if the write is a size probe
-+ * (i.e. writing ~0 to a BAR), we remember it and arrange to return
-+ * the appropriate size mask on the next read. This is cheating
-+ * to some extent, because it depends on the fact that the next
-+ * access after such a write will always be a read to the same BAR.
-+ */
-+
-+ if ((reg >= 0x10) && (reg < 0x2c)) {
-+ /* Write is to a BAR */
-+ if (value == ~0)
-+ bar_probing = 1;
-+ } else {
-+ /*
-+ * No warning on writes to ROM BAR, CMD, LATENCY_TIMER,
-+ * CACHE_LINE_SIZE, or PM registers.
-+ */
-+ if ((reg != 0x30) && (reg != 0x04) && (reg != 0x0d) &&
-+ (reg != 0x0c) && (reg != 0x44))
-+ printk(KERN_WARNING "OLPC PCI: Config write to devfn %x reg %x value %x\n", devfn, reg, value);
-+ }
-+
-+ return 0;
-+}
-+
-+static struct pci_raw_ops pci_olpc_conf = {
-+ .read = pci_olpc_read,
-+ .write = pci_olpc_write,
-+};
-+
-+void __init pci_olpc_init(void)
-+{
-+ if (!machine_is_olpc() || olpc_has_vsa())
-+ return;
-+
-+ printk(KERN_INFO "PCI: Using configuration type OLPC\n");
-+ raw_pci_ops = &pci_olpc_conf;
-+ is_lx = is_geode_lx();
-+}
diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h
index 8c66f27..a67e617 100644
--- a/arch/i386/pci/pci.h
@@ -8569,621 +507,6 @@ index 9e6e363..f4654ce 100644
psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o
psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o
+psmouse-$(CONFIG_MOUSE_PS2_OLPC) += olpc.o
-diff --git a/drivers/input/mouse/olpc.c b/drivers/input/mouse/olpc.c
-new file mode 100644
-index 0000000..dc575ac
---- /dev/null
-+++ b/drivers/input/mouse/olpc.c
-@@ -0,0 +1,554 @@
-+/*
-+ * OLPC touchpad PS/2 mouse driver
-+ *
-+ * Copyright (c) 2006 One Laptop Per Child, inc.
-+ * Authors Zephaniah E. Hull and Andres Salomon <dilinger@laptop.org>
-+ *
-+ * This driver is partly based on the ALPS driver, which is:
-+ *
-+ * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au>
-+ * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
-+ * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
-+ * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+/*
-+ * The touchpad on the OLPC is fairly wide, with the entire area usable
-+ * as a tablet ("PT mode"), and the center 1/3rd also usable as a touchpad
-+ * ("GS mode").
-+ *
-+ * Earlier version of the device had simultaneous reporting; however, that
-+ * was removed. Instead, the device now reports packets in one mode, and
-+ * tells the driver when a mode switch needs to happen.
-+ */
-+
-+#include <linux/input.h>
-+#include <linux/serio.h>
-+#include <linux/libps2.h>
-+#include <linux/delay.h>
-+#include <asm/olpc.h>
-+
-+#include "psmouse.h"
-+#include "olpc.h"
-+
-+static int tpdebug;
-+module_param(tpdebug, int, 0644);
-+
-+#define OLPC_GS 1 /* The GS sensor. */
-+#define OLPC_PT 2 /* The PT sensor. */
-+
-+static struct olpc_model_info olpc_model_data[] = {
-+ { { 0x67, 0x00, 0x00 }, OLPC_GS | OLPC_PT }, /* unknown ID */
-+ { { 0x67, 0x00, 0x0a }, OLPC_GS | OLPC_PT }, /* pre-B1 */
-+ { { 0x67, 0x00, 0x14 }, OLPC_GS }, /* B1.*/
-+ { { 0x67, 0x00, 0x28 }, OLPC_GS | OLPC_PT }, /* B2 */
-+ { { 0x67, 0x00, 0x3c }, OLPC_GS | OLPC_PT }, /* B2-2 */
-+ { { 0x67, 0x00, 0x50 }, OLPC_GS | OLPC_PT }, /* C1 */
-+};
-+
-+#define OLPC_PKT_PT 0xcf
-+#define OLPC_PKT_GS 0xff
-+
-+static int olpc_absolute_mode(struct psmouse *psmouse, int mode);
-+
-+/*
-+ * OLPC absolute Mode - single-mode format
-+ *
-+ * byte 0: 1 1 0 0 1 1 1 1
-+ * byte 1: 0 x6 x5 x4 x3 x2 x1 x0
-+ * byte 2(PT): 0 0 x9 x8 x7 ? pt-dsw gs-dsw
-+ * byte 2(GS): 0 x10 x9 x8 x7 ? gs-dsw pt-dsw
-+ * byte 3: 0 y9 y8 y7 1 0 swr swl
-+ * byte 4: 0 y6 y5 y4 y3 y2 y1 y0
-+ * byte 5: 0 z6 z5 z4 z3 z2 z1 z0
-+ *
-+ * ?'s are not defined in the protocol spec, may vary between models.
-+ *
-+ * swr/swl are the left/right buttons.
-+ *
-+ * pt-dsw/gs-dsw indicate that the pt/gs sensor is detecting a
-+ * pen/finger
-+ */
-+
-+static void olpc_process_packet_gspt(struct psmouse *psmouse)
-+{
-+ struct olpc_data *priv = psmouse->private;
-+ unsigned char *packet = psmouse->packet;
-+ struct input_dev *dev = psmouse->dev;
-+ struct input_dev *dev2 = priv->dev2;
-+ int x, y, z, gs_down = 0, pt_down = 0, left, right;
-+ struct timeval now_tv;
-+ s64 now_ns;
-+
-+ left = packet[3] & 1;
-+ right = packet[3] & 2;
-+ x = packet[1] | ((packet[2] & 0x78) << 4);
-+ y = packet[4] | ((packet[3] & 0x70) << 3);
-+ z = packet[5];
-+
-+ if (psmouse->packet[0] == OLPC_PKT_GS) {
-+ pt_down = !!(packet[2] & 1);
-+ gs_down = !!(packet[2] & 2);
-+ } else if (psmouse->packet[0] == OLPC_PKT_PT) {
-+ gs_down = !!(packet[2] & 1);
-+ pt_down = !!(packet[2] & 2);
-+ }
-+
-+ /*
-+ * XXX: Kludge.
-+ * If it's been more than 30ms since the last packet,
-+ * assume that there was a lift we were never told about.
-+ */
-+ do_gettimeofday(&now_tv);
-+ now_ns = timeval_to_ns (&now_tv);
-+ if (now_ns >= priv->late) {
-+ input_report_key(dev, BTN_TOUCH, 0);
-+ input_report_key(dev, BTN_TOOL_PEN, 0);
-+ input_report_key(dev2, BTN_TOUCH, 0);
-+ input_report_key(dev2, BTN_TOOL_FINGER, 0);
-+
-+ input_sync(dev);
-+ input_sync(dev2);
-+ }
-+
-+ priv->late = now_ns + (30 * NSEC_PER_MSEC);
-+
-+
-+ if (tpdebug) {
-+ printk(KERN_DEBUG "%s %02x %02x %02x %02x %02x %02x\n",
-+ __FUNCTION__, psmouse->packet[0], psmouse->packet[1],
-+ psmouse->packet[2], psmouse->packet[3], psmouse->packet[4],
-+ psmouse->packet[5]);
-+ printk(KERN_DEBUG "l=%d r=%d p=%d g=%d x=%d y=%d z=%d\n",
-+ left, right, pt_down, gs_down, x, y, z);
-+ }
-+
-+ if (psmouse->packet[0] == OLPC_PKT_PT) {
-+ input_report_key(dev, BTN_LEFT, left);
-+ input_report_key(dev, BTN_RIGHT, right);
-+ } else if (psmouse->packet[0] == OLPC_PKT_GS) {
-+ input_report_key(dev, BTN_LEFT, left);
-+ input_report_key(dev, BTN_RIGHT, right);
-+ input_report_key(dev2, BTN_LEFT, left);
-+ input_report_key(dev2, BTN_RIGHT, right);
-+ }
-+
-+ input_report_key(dev, BTN_TOUCH, pt_down);
-+ input_report_key(dev, BTN_TOOL_PEN, pt_down);
-+ input_report_key(dev2, BTN_TOUCH, gs_down);
-+ input_report_key(dev2, BTN_TOOL_FINGER, gs_down);
-+
-+ input_report_abs(dev2, ABS_PRESSURE, z);
-+
-+ if (psmouse->packet[0] == OLPC_PKT_PT && pt_down) {
-+ input_report_abs(dev, ABS_X, x);
-+ input_report_abs(dev, ABS_Y, y);
-+ } else if (psmouse->packet[0] == OLPC_PKT_GS && gs_down) {
-+ input_report_abs(dev2, ABS_X, x);
-+ input_report_abs(dev2, ABS_Y, y);
-+ }
-+
-+ input_sync(dev);
-+ input_sync(dev2);
-+
-+ if (priv->pending_mode == OLPC_GS &&
-+ psmouse->packet[0] == OLPC_PKT_PT && pt_down) {
-+ priv->pending_mode = 0;
-+ cancel_delayed_work(&priv->mode_switch);
-+ }
-+
-+ if (priv->i->flags & (OLPC_PT|OLPC_GS)) {
-+ int pending = 0;
-+ if (psmouse->packet[0] == OLPC_PKT_PT && !pt_down)
-+ pending = OLPC_GS;
-+ else if (psmouse->packet[0] == OLPC_PKT_GS && pt_down)
-+ pending = OLPC_PT;
-+
-+ if (priv->current_mode == pending) {
-+ priv->pending_mode = 0;
-+ pending = priv->current_mode;
-+ }
-+ else if (priv->pending_mode != pending) {
-+ priv->pending_mode = pending;
-+ if (tpdebug)
-+ printk(KERN_WARNING "Scheduling mode switch to %s.\n",
-+ pending == OLPC_GS ? "GS" : "PT");
-+
-+ /*
-+ * Apply a de-bounce when switching from PT to GS, to allow for
-+ * spurious PT-up packets.
-+ */
-+ if (priv->pending_mode == OLPC_GS)
-+ queue_delayed_work(kpsmoused_wq, &priv->mode_switch, msecs_to_jiffies(50));
-+ else
-+ queue_delayed_work(kpsmoused_wq, &priv->mode_switch, 0);
-+ }
-+ }
-+}
-+
-+static psmouse_ret_t olpc_process_byte(struct psmouse *psmouse)
-+{
-+ psmouse_ret_t ret = PSMOUSE_BAD_DATA;
-+
-+ if (psmouse->packet[0] != OLPC_PKT_PT &&
-+ psmouse->packet[0] != OLPC_PKT_GS)
-+ goto out;
-+
-+ /* Bytes 2 - 6 should have 0 in the highest bit */
-+ if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 &&
-+ (psmouse->packet[psmouse->pktcnt - 1] & 0x80))
-+ goto out;
-+
-+ if (psmouse->pktcnt == 6) {
-+ olpc_process_packet_gspt(psmouse);
-+ ret = PSMOUSE_FULL_PACKET;
-+ goto out;
-+ }
-+
-+ ret = PSMOUSE_GOOD_DATA;
-+out:
-+ if (ret != PSMOUSE_GOOD_DATA && ret != PSMOUSE_FULL_PACKET)
-+ printk(KERN_DEBUG "%s: (%d) %02x %02x %02x %02x %02x %02x\n",
-+ __FUNCTION__, psmouse->pktcnt, psmouse->packet[0],
-+ psmouse->packet[1], psmouse->packet[2],
-+ psmouse->packet[3], psmouse->packet[4],
-+ psmouse->packet[5]);
-+ return ret;
-+}
-+
-+static struct olpc_model_info *olpc_get_model(struct psmouse *psmouse)
-+{
-+ struct ps2dev *ps2dev = &psmouse->ps2dev;
-+ unsigned char param[4];
-+ int i;
-+
-+ /*
-+ * Now try "E7 report". Allowed responses are in
-+ * olpc_model_data[].signature
-+ */
-+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
-+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
-+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21))
-+ return NULL;
-+
-+ param[0] = param[1] = param[2] = 0xff;
-+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
-+ return NULL;
-+
-+ pr_debug("olpc.c(%d): E7 report: %2.2x %2.2x %2.2x",
-+ __LINE__, param[0], param[1], param[2]);
-+
-+ for (i = 0; i < ARRAY_SIZE(olpc_model_data); i++) {
-+ if (!memcmp(param, olpc_model_data[i].signature,
-+ sizeof(olpc_model_data[i].signature))) {
-+ printk(KERN_INFO __FILE__ ": OLPC touchpad revision 0x%x.\n", param[2]);
-+ return olpc_model_data + i;
-+ }
-+ }
-+
-+ /*
-+ * ALPS creates new IDs pretty frequently; rather than listing them
-+ * all, just assume they support the defaults. We've set aside the
-+ * first entry of olpc_model_data as the catch-all.
-+ */
-+ if (!memcmp(param, olpc_model_data[0].signature, 2)) {
-+ printk(KERN_INFO __FILE__ ": unknown ALPS revision %x, assuming default flags.\n", param[2]);
-+ return &olpc_model_data[0];
-+ }
-+
-+ return NULL;
-+}
-+
-+static int olpc_find_mode(struct psmouse *psmouse)
-+{
-+ struct olpc_data *priv = psmouse->private;
-+ int mode = priv->i->flags;
-+
-+ if (mode & OLPC_GS)
-+ mode = OLPC_GS;
-+ else if (mode & OLPC_PT)
-+ mode = OLPC_PT;
-+ else
-+ mode = -1;
-+
-+ return mode;
-+}
-+
-+/*
-+ * Touchpad should be disabled before calling this!
-+ */
-+static int olpc_new_mode(struct psmouse *psmouse, int mode)
-+{
-+ struct ps2dev *ps2dev = &psmouse->ps2dev;
-+ struct olpc_data *priv = psmouse->private;
-+ unsigned char param;
-+ int ret;
-+
-+ if (tpdebug)
-+ printk(KERN_WARNING __FILE__ ": Switching to %d. [%lu]\n", mode, jiffies);
-+
-+ if ((ret = ps2_command(ps2dev, &param, 0x01F2)))
-+ goto failed;
-+ if ((ret = ps2_command(ps2dev, &param, 0x01F2)))
-+ goto failed;
-+ if ((ret = ps2_command(ps2dev, &param, 0x01F2)))
-+ goto failed;
-+
-+ switch (mode) {
-+ default:
-+ printk(KERN_WARNING __FILE__ ": Invalid mode %d. Defaulting to OLPC_GS.\n", mode);
-+ case OLPC_GS:
-+ ret = ps2_command(ps2dev, NULL, 0xE6);
-+ break;
-+ case OLPC_PT:
-+ ret = ps2_command(ps2dev, NULL, 0xE7);
-+ break;
-+ }
-+ if (ret)
-+ goto failed;
-+
-+ /* XXX: This is a bit hacky, make sure this isn't screwing stuff up. */
-+ psmouse->pktcnt = psmouse->out_of_sync = 0;
-+ psmouse->last = jiffies;
-+ psmouse->state = PSMOUSE_ACTIVATED;
-+
-+ if ((ret = ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)))
-+ goto failed;
-+
-+ priv->current_mode = mode;
-+ priv->pending_mode = 0;
-+ if (tpdebug)
-+ printk(KERN_WARNING __FILE__ ": Switched to mode %d successful.\n", mode);
-+
-+failed:
-+ if (ret)
-+ printk(KERN_WARNING __FILE__ ": Mode switch to %d failed! (%d) [%lu]\n", mode, ret, jiffies);
-+ return ret;
-+}
-+
-+static int olpc_absolute_mode(struct psmouse *psmouse, int mode)
-+{
-+ struct ps2dev *ps2dev = &psmouse->ps2dev;
-+
-+ /* Switch to 'Advanced mode.', four disables in a row. */
-+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
-+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
-+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
-+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
-+ return -1;
-+
-+ return olpc_new_mode(psmouse, mode);
-+}
-+
-+/*
-+ * olpc_poll() - poll the touchpad for current motion packet.
-+ * Used in resync.
-+ * Note: We can't poll, so always return failure.
-+ */
-+static int olpc_poll(struct psmouse *psmouse)
-+{
-+ return -1;
-+}
-+
-+static int olpc_reconnect(struct psmouse *psmouse)
-+{
-+ struct olpc_data *priv = psmouse->private;
-+ int mode;
-+
-+ if (olpc_rev_after(OLPC_REV_B2))
-+ if (psmouse->ps2dev.serio->dev.power.power_state.event != PM_EVENT_ON)
-+ return 0;
-+
-+ psmouse_reset(psmouse);
-+
-+ if (!(priv->i = olpc_get_model(psmouse)))
-+ return -1;
-+
-+ mode = olpc_find_mode(psmouse);
-+ if (mode < 0)
-+ return -1;
-+
-+ if (olpc_absolute_mode(psmouse, mode)) {
-+ printk(KERN_ERR __FILE__ ": Failed to reenable absolute mode.\n");
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+static void olpc_disconnect(struct psmouse *psmouse)
-+{
-+ struct olpc_data *priv = psmouse->private;
-+
-+ psmouse_reset(psmouse);
-+ input_unregister_device(priv->dev2);
-+ kfree(priv);
-+}
-+
-+static void olpc_mode_switch(struct work_struct *w)
-+{
-+ struct delayed_work *work = container_of(w, struct delayed_work, work);
-+ struct olpc_data *priv = container_of(work, struct olpc_data, mode_switch);
-+ struct psmouse *psmouse = priv->psmouse;
-+ struct ps2dev *ps2dev = &psmouse->ps2dev;
-+ int pending_mode, ret;
-+
-+ if (priv->pending_mode == priv->current_mode) {
-+ priv->pending_mode = 0;
-+ printk (KERN_DEBUG __FILE__ ": In switch_mode, no target mode.\n");
-+ return;
-+ }
-+
-+ if (tpdebug)
-+ printk(KERN_WARNING __FILE__ ": Disable for switch to %d. [%lu]\n", priv->pending_mode, jiffies);
-+
-+ /* XXX: This is a bit hacky, make sure this isn't screwing stuff up. */
-+ psmouse->state = PSMOUSE_INITIALIZING;
-+
-+ ret = ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE);
-+ if (ret) {
-+ /* XXX: if this ever fails, we need to do a full reset! */
-+ printk(KERN_WARNING __FILE__ ": Disable failed for switch to %d. (%d) [%lu]\n", priv->pending_mode, ret, jiffies);
-+ return;
-+ }
-+
-+ /*
-+ * ALPS tells us that it may take up to 20msec for the disable to
-+ * take effect; however, ps2_command() will wait up to 200msec for
-+ * the ACK to come back (and I'm assuming that by the time the
-+ * hardware sends back its ACK, it has stopped sending bytes).
-+ */
-+ pending_mode = priv->pending_mode;
-+
-+ if (olpc_new_mode(psmouse, priv->pending_mode))
-+ goto bad;
-+
-+ /*
-+ * Deal with a potential race condition.
-+ *
-+ * If there is a brief tap of a stylus or a fingernail that
-+ * triggers a mode switch to PT mode, and the stylus/fingernail is
-+ * lifted after the DISABLE above, but before we reenable in the new mode,
-+ * then we can get stuck in PT mode.
-+ */
-+ if (pending_mode == OLPC_PT) {
-+ priv->pending_mode = OLPC_GS;
-+ queue_delayed_work(kpsmoused_wq, &priv->mode_switch, msecs_to_jiffies(50));
-+ }
-+
-+ return;
-+
-+bad:
-+ printk(KERN_WARNING __FILE__ ": Failure to switch modes, resetting device...\n");
-+ olpc_reconnect(psmouse);
-+}
-+
-+int olpc_init(struct psmouse *psmouse)
-+{
-+ struct olpc_data *priv;
-+ struct input_dev *dev = psmouse->dev;
-+ struct input_dev *dev2;
-+ int mode;
-+
-+ priv = kzalloc(sizeof(struct olpc_data), GFP_KERNEL);
-+ dev2 = input_allocate_device();
-+ if (!priv || !dev2)
-+ goto init_fail;
-+
-+ psmouse->private = priv;
-+ priv->dev2 = dev2;
-+ priv->psmouse = psmouse;
-+
-+ psmouse_reset(psmouse);
-+ if (!(priv->i = olpc_get_model(psmouse)))
-+ goto init_fail;
-+
-+ mode = olpc_find_mode(psmouse);
-+ if (mode < 0) {
-+ printk(KERN_ERR __FILE__ ": Failed to identify proper mode\n");
-+ goto init_fail;
-+ }
-+
-+ if (olpc_absolute_mode(psmouse, mode)) {
-+ printk(KERN_ERR __FILE__ ": Failed to enable absolute mode\n");
-+ goto init_fail;
-+ }
-+
-+ /*
-+ * Unset some of the default bits for things we don't have.
-+ */
-+ dev->evbit[LONG(EV_REL)] &= ~BIT(EV_REL);
-+ dev->relbit[LONG(REL_X)] &= ~(BIT(REL_X) | BIT(REL_Y));
-+ dev->keybit[LONG(BTN_MIDDLE)] &= ~BIT(BTN_MIDDLE);
-+
-+ dev->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
-+ dev->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
-+ dev->keybit[LONG(BTN_TOOL_PEN)] |= BIT(BTN_TOOL_PEN);
-+ dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT);
-+
-+ dev->evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
-+ input_set_abs_params(dev, ABS_X, 2, 1000, 0, 0);
-+ input_set_abs_params(dev, ABS_Y, 0, 717, 0, 0);
-+
-+ snprintf(priv->phys, sizeof(priv->phys),
-+ "%s/input1", psmouse->ps2dev.serio->phys);
-+ dev2->phys = priv->phys;
-+ dev2->name = "OLPC ALPS GlideSensor";
-+ dev2->id.bustype = BUS_I8042;
-+ dev2->id.vendor = 0x0002;
-+ dev2->id.product = PSMOUSE_OLPC;
-+ dev2->id.version = 0x0000;
-+
-+ dev2->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
-+ dev2->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
-+ dev2->keybit[LONG(BTN_TOOL_FINGER)] |= BIT(BTN_TOOL_FINGER);
-+ dev2->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT);
-+
-+ dev2->evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
-+ input_set_abs_params(dev2, ABS_X, 350, 512, 0, 0);
-+ input_set_abs_params(dev2, ABS_Y, 70, 325, 0, 0);
-+ input_set_abs_params(dev2, ABS_PRESSURE, 0, 63, 0, 0);
-+
-+ if (input_register_device(dev2)) {
-+ printk(KERN_ERR __FILE__ ": Failed to register GlideSensor\n");
-+ goto init_fail;
-+ }
-+
-+ psmouse->protocol_handler = olpc_process_byte;
-+ psmouse->poll = olpc_poll;
-+ psmouse->disconnect = olpc_disconnect;
-+ psmouse->reconnect = olpc_reconnect;
-+ psmouse->pktsize = 6;
-+
-+ /* Disable the idle resync. */
-+ psmouse->resync_time = 0;
-+ /* Reset after a lot of bad bytes. */
-+ psmouse->resetafter = 1024;
-+
-+ INIT_DELAYED_WORK(&priv->mode_switch, olpc_mode_switch);
-+
-+ return 0;
-+
-+init_fail:
-+ input_free_device(dev2);
-+ kfree(priv);
-+ return -1;
-+}
-+
-+int olpc_detect(struct psmouse *psmouse, int set_properties)
-+{
-+ if (!olpc_get_model(psmouse))
-+ return -1;
-+
-+ if (set_properties) {
-+ psmouse->vendor = "ALPS";
-+ psmouse->name = "PenTablet";
-+ psmouse->model = 0;
-+ }
-+ return 0;
-+}
-+
-diff --git a/drivers/input/mouse/olpc.h b/drivers/input/mouse/olpc.h
-new file mode 100644
-index 0000000..426f8b4
---- /dev/null
-+++ b/drivers/input/mouse/olpc.h
-@@ -0,0 +1,49 @@
-+/*
-+ * OLPC touchpad PS/2 mouse driver
-+ *
-+ * Copyright (c) 2006 One Laptop Per Child, inc.
-+ *
-+ * This driver is partly based on the ALPS driver.
-+ * Copyright (c) 2003 Peter Osterlund <petero2@telia.com>
-+ * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ */
-+
-+#ifndef _OLPC_H
-+#define _OLPC_H
-+
-+struct olpc_model_info {
-+ unsigned char signature[3];
-+ unsigned char flags;
-+};
-+
-+struct olpc_data {
-+ struct input_dev *dev2; /* Relative device */
-+ struct psmouse *psmouse;
-+ char name[32]; /* Name */
-+ char phys[32]; /* Phys */
-+ struct olpc_model_info *i; /* Info */
-+ int pending_mode;
-+ int current_mode;
-+ s64 late;
-+ struct delayed_work mode_switch;
-+};
-+
-+#ifdef CONFIG_MOUSE_PS2_OLPC
-+int olpc_detect(struct psmouse *psmouse, int set_properties);
-+int olpc_init(struct psmouse *psmouse);
-+#else
-+inline int olpc_detect(struct psmouse *psmouse, int set_properties)
-+{
-+ return -ENOSYS;
-+}
-+inline int olpc_init(struct psmouse *psmouse)
-+{
-+ return -ENOSYS;
-+}
-+#endif
-+
-+#endif
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index b9f0fb2..edcdb68 100644
--- a/drivers/input/mouse/psmouse-base.c
@@ -10471,394 +1794,6 @@ index c153b64..6c2645e 100644
/* These are exported solely for the purpose of mtd_blkdevs.c. You
should not use them for _anything_ else */
DEFINE_MUTEX(mtd_table_mutex);
-diff --git a/drivers/mtd/mtdcore.h b/drivers/mtd/mtdcore.h
-new file mode 100644
-index 0000000..a33251f
---- /dev/null
-+++ b/drivers/mtd/mtdcore.h
-@@ -0,0 +1,11 @@
-+/* linux/drivers/mtd/mtdcore.h
-+ *
-+ * Header file for driver private mtdcore exports
-+ *
-+ */
-+
-+/* These are exported solely for the purpose of mtd_blkdevs.c. You
-+ should not use them for _anything_ else */
-+
-+extern struct mutex mtd_table_mutex;
-+extern struct mtd_info *mtd_table[MAX_MTD_DEVICES];
-diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c
-new file mode 100644
-index 0000000..cfc28ab
---- /dev/null
-+++ b/drivers/mtd/mtdoops.c
-@@ -0,0 +1,365 @@
-+/*
-+ * MTD Oops/Panic logger
-+ *
-+ * Copyright (C) 2007 Nokia Corporation. All rights reserved.
-+ *
-+ * Author: Richard Purdie <rpurdie@openedhand.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/console.h>
-+#include <linux/vmalloc.h>
-+#include <linux/workqueue.h>
-+#include <linux/sched.h>
-+#include <linux/wait.h>
-+#include <linux/mtd/mtd.h>
-+
-+#define OOPS_PAGE_SIZE 4096
-+
-+static struct mtdoops_context {
-+ int mtd_index;
-+ struct work_struct work;
-+ struct mtd_info *mtd;
-+ int oops_pages;
-+ int nextpage;
-+ int nextcount;
-+
-+ void *oops_buf;
-+ int ready;
-+ int writecount;
-+} oops_cxt;
-+
-+static void mtdoops_erase_callback(struct erase_info *done)
-+{
-+ wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
-+ wake_up(wait_q);
-+}
-+
-+static int mtdoops_erase_block(struct mtd_info *mtd, int offset)
-+{
-+ struct erase_info erase;
-+ DECLARE_WAITQUEUE(wait, current);
-+ wait_queue_head_t wait_q;
-+ int ret;
-+
-+ init_waitqueue_head(&wait_q);
-+ erase.mtd = mtd;
-+ erase.callback = mtdoops_erase_callback;
-+ erase.addr = offset;
-+ if (mtd->erasesize < OOPS_PAGE_SIZE)
-+ erase.len = OOPS_PAGE_SIZE;
-+ else
-+ erase.len = mtd->erasesize;
-+ erase.priv = (u_long)&wait_q;
-+
-+ set_current_state(TASK_INTERRUPTIBLE);
-+ add_wait_queue(&wait_q, &wait);
-+
-+ ret = mtd->erase(mtd, &erase);
-+ if (ret) {
-+ set_current_state(TASK_RUNNING);
-+ remove_wait_queue(&wait_q, &wait);
-+ printk (KERN_WARNING "mtdoops: erase of region [0x%x, 0x%x] "
-+ "on \"%s\" failed\n",
-+ erase.addr, erase.len, mtd->name);
-+ return ret;
-+ }
-+
-+ schedule(); /* Wait for erase to finish. */
-+ remove_wait_queue(&wait_q, &wait);
-+
-+ return 0;
-+}
-+
-+static int mtdoops_inc_counter(struct mtdoops_context *cxt)
-+{
-+ struct mtd_info *mtd = cxt->mtd;
-+ size_t retlen;
-+ u32 count;
-+ int ret;
-+
-+ cxt->nextpage++;
-+ if (cxt->nextpage > cxt->oops_pages)
-+ cxt->nextpage = 0;
-+ cxt->nextcount++;
-+ if (cxt->nextcount == 0xffffffff)
-+ cxt->nextcount = 0;
-+
-+ ret = mtd->read(mtd, cxt->nextpage * OOPS_PAGE_SIZE, 4,
-+ &retlen, (u_char *) &count);
-+ if ((retlen != 4) || (ret < 0)) {
-+ printk(KERN_ERR "mtdoops: Read failure at %d (%d of 4 read)"
-+ ", err %d.\n", cxt->nextpage * OOPS_PAGE_SIZE,
-+ retlen, ret);
-+ return 1;
-+ }
-+
-+ /* See if we need to erase the next block */
-+ if (count != 0xffffffff)
-+ return 1;
-+
-+ printk(KERN_DEBUG "mtdoops: Ready %d, %d (no erase)\n",
-+ cxt->nextpage, cxt->nextcount);
-+ cxt->ready = 1;
-+ return 0;
-+}
-+
-+static void mtdoops_prepare(struct mtdoops_context *cxt)
-+{
-+ struct mtd_info *mtd = cxt->mtd;
-+ int i = 0, j, ret, mod;
-+
-+ /* We were unregistered */
-+ if (!mtd)
-+ return;
-+
-+ mod = (cxt->nextpage * OOPS_PAGE_SIZE) % mtd->erasesize;
-+ if (mod != 0) {
-+ cxt->nextpage = cxt->nextpage + ((mtd->erasesize - mod) / OOPS_PAGE_SIZE);
-+ if (cxt->nextpage > cxt->oops_pages)
-+ cxt->nextpage = 0;
-+ }
-+
-+ while (mtd->block_isbad &&
-+ mtd->block_isbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE)) {
-+badblock:
-+ printk(KERN_WARNING "mtdoops: Bad block at %08x\n",
-+ cxt->nextpage * OOPS_PAGE_SIZE);
-+ i++;
-+ cxt->nextpage = cxt->nextpage + (mtd->erasesize / OOPS_PAGE_SIZE);
-+ if (cxt->nextpage > cxt->oops_pages)
-+ cxt->nextpage = 0;
-+ if (i == (cxt->oops_pages / (mtd->erasesize / OOPS_PAGE_SIZE))) {
-+ printk(KERN_ERR "mtdoops: All blocks bad!\n");
-+ return;
-+ }
-+ }
-+
-+ for (j = 0, ret = -1; (j < 3) && (ret < 0); j++)
-+ ret = mtdoops_erase_block(mtd, cxt->nextpage * OOPS_PAGE_SIZE);
-+
-+ if (ret < 0) {
-+ if (mtd->block_markbad)
-+ mtd->block_markbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE);
-+ goto badblock;
-+ }
-+
-+ printk(KERN_DEBUG "mtdoops: Ready %d, %d \n", cxt->nextpage, cxt->nextcount);
-+
-+ cxt->ready = 1;
-+}
-+
-+static void mtdoops_workfunc(struct work_struct *work)
-+{
-+ struct mtdoops_context *cxt =
-+ container_of(work, struct mtdoops_context, work);
-+
-+ mtdoops_prepare(cxt);
-+}
-+
-+static int find_next_position(struct mtdoops_context *cxt)
-+{
-+ struct mtd_info *mtd = cxt->mtd;
-+ int page, maxpos = 0;
-+ u32 count, maxcount = 0xffffffff;
-+ size_t retlen;
-+
-+ for (page = 0; page < cxt->oops_pages; page++) {
-+ mtd->read(mtd, page * OOPS_PAGE_SIZE, 4, &retlen, (u_char *) &count);
-+ if (count == 0xffffffff)
-+ continue;
-+ if (maxcount == 0xffffffff) {
-+ maxcount = count;
-+ maxpos = page;
-+ } else if ((count < 0x40000000) && (maxcount > 0xc0000000)) {
-+ maxcount = count;
-+ maxpos = page;
-+ } else if ((count > maxcount) && (count < 0xc0000000)) {
-+ maxcount = count;
-+ maxpos = page;
-+ } else if ((count > maxcount) && (count > 0xc0000000)
-+ && (maxcount > 0x80000000)) {
-+ maxcount = count;
-+ maxpos = page;
-+ }
-+ }
-+ if (maxcount == 0xffffffff) {
-+ cxt->nextpage = 0;
-+ cxt->nextcount = 1;
-+ cxt->ready = 1;
-+ printk(KERN_DEBUG "mtdoops: Ready %d, %d (first init)\n",
-+ cxt->nextpage, cxt->nextcount);
-+ return 0;
-+ }
-+
-+ cxt->nextpage = maxpos;
-+ cxt->nextcount = maxcount;
-+
-+ return mtdoops_inc_counter(cxt);
-+}
-+
-+
-+static void mtdoops_notify_add(struct mtd_info *mtd)
-+{
-+ struct mtdoops_context *cxt = &oops_cxt;
-+ int ret;
-+
-+ if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0)
-+ return;
-+
-+ if (mtd->size < (mtd->erasesize * 2)) {
-+ printk(KERN_ERR "MTD partition %d not big enough for mtdoops\n",
-+ mtd->index);
-+ return;
-+ }
-+
-+ cxt->mtd = mtd;
-+ cxt->oops_pages = mtd->size / OOPS_PAGE_SIZE;
-+
-+ ret = find_next_position(cxt);
-+ if (ret == 1)
-+ mtdoops_prepare(cxt);
-+
-+ printk(KERN_DEBUG "mtdoops: Attached to MTD device %d\n", mtd->index);
-+}
-+
-+static void mtdoops_notify_remove(struct mtd_info *mtd)
-+{
-+ struct mtdoops_context *cxt = &oops_cxt;
-+
-+ if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0)
-+ return;
-+
-+ cxt->mtd = NULL;
-+ flush_scheduled_work();
-+}
-+
-+
-+static void
-+mtdoops_console_write(struct console *co, const char *s, unsigned int count)
-+{
-+ struct mtdoops_context *cxt = co->data;
-+ struct mtd_info *mtd = cxt->mtd;
-+ int i, ret;
-+
-+ if (!cxt->ready || !mtd)
-+ return;
-+
-+ if (!oops_in_progress && cxt->writecount != 0) {
-+ size_t retlen;
-+ if (cxt->writecount < OOPS_PAGE_SIZE)
-+ memset(cxt->oops_buf + cxt->writecount, 0xff,
-+ OOPS_PAGE_SIZE - cxt->writecount);
-+
-+ ret = mtd->write(mtd, cxt->nextpage * OOPS_PAGE_SIZE,
-+ OOPS_PAGE_SIZE, &retlen, cxt->oops_buf);
-+ cxt->ready = 0;
-+ cxt->writecount = 0;
-+
-+ if ((retlen != OOPS_PAGE_SIZE) || (ret < 0))
-+ printk(KERN_ERR "mtdoops: Write failure at %d (%d of %d"
-+ " written), err %d.\n",
-+ cxt->nextpage * OOPS_PAGE_SIZE, retlen,
-+ OOPS_PAGE_SIZE, ret);
-+
-+ ret = mtdoops_inc_counter(cxt);
-+ if (ret == 1)
-+ schedule_work(&cxt->work);
-+ }
-+
-+ if (!oops_in_progress)
-+ return;
-+
-+ if (cxt->writecount == 0) {
-+ u32 *stamp = cxt->oops_buf;
-+ *stamp = cxt->nextcount;
-+ cxt->writecount = 4;
-+ }
-+
-+ if ((count + cxt->writecount) > OOPS_PAGE_SIZE)
-+ count = OOPS_PAGE_SIZE - cxt->writecount;
-+
-+ for (i = 0; i < count; i++, s++)
-+ *((char *)(cxt->oops_buf) + cxt->writecount + i) = *s;
-+
-+ cxt->writecount = cxt->writecount + count;
-+}
-+
-+static int __init mtdoops_console_setup(struct console *co, char *options)
-+{
-+ struct mtdoops_context *cxt = co->data;
-+
-+ if (cxt->mtd_index != -1)
-+ return -EBUSY;
-+ if (co->index == -1)
-+ return -EINVAL;
-+
-+ cxt->mtd_index = co->index;
-+ return 0;
-+}
-+
-+static struct mtd_notifier mtdoops_notifier = {
-+ .add = mtdoops_notify_add,
-+ .remove = mtdoops_notify_remove,
-+};
-+
-+static struct console mtdoops_console = {
-+ .name = "ttyMTD",
-+ .write = mtdoops_console_write,
-+ .setup = mtdoops_console_setup,
-+ .flags = CON_PRINTBUFFER,
-+ .index = -1,
-+ .data = &oops_cxt,
-+};
-+
-+static int __init mtdoops_console_init(void)
-+{
-+ struct mtdoops_context *cxt = &oops_cxt;
-+
-+ cxt->mtd_index = -1;
-+ cxt->oops_buf = vmalloc(OOPS_PAGE_SIZE);
-+
-+ if (!cxt->oops_buf) {
-+ printk(KERN_ERR "Failed to allocate oops buffer workspace\n");
-+ return -ENOMEM;
-+ }
-+
-+ INIT_WORK(&cxt->work, mtdoops_workfunc);
-+
-+ register_console(&mtdoops_console);
-+ register_mtd_user(&mtdoops_notifier);
-+ return 0;
-+}
-+
-+static void __exit mtdoops_console_exit(void)
-+{
-+ struct mtdoops_context *cxt = &oops_cxt;
-+
-+ unregister_mtd_user(&mtdoops_notifier);
-+ unregister_console(&mtdoops_console);
-+ vfree(cxt->oops_buf);
-+}
-+
-+
-+subsys_initcall(mtdoops_console_init);
-+module_exit(mtdoops_console_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
-+MODULE_DESCRIPTION("MTD Oops/Panic console logger/driver");
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index f1d60b6..df25cab 100644
--- a/drivers/mtd/nand/Kconfig
@@ -11301,507 +2236,6 @@ index 0537fac..7d194cf 100644
return 0;
}
-diff --git a/drivers/mtd/onenand/onenand_sim.c b/drivers/mtd/onenand/onenand_sim.c
-new file mode 100644
-index 0000000..b806673
---- /dev/null
-+++ b/drivers/mtd/onenand/onenand_sim.c
-@@ -0,0 +1,495 @@
-+/*
-+ * linux/drivers/mtd/onenand/onenand_sim.c
-+ *
-+ * The OneNAND simulator
-+ *
-+ * Copyright © 2005-2007 Samsung Electronics
-+ * Kyungmin Park <kyungmin.park@samsung.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/vmalloc.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/onenand.h>
-+
-+#include <linux/io.h>
-+
-+#ifndef CONFIG_ONENAND_SIM_MANUFACTURER
-+#define CONFIG_ONENAND_SIM_MANUFACTURER 0xec
-+#endif
-+#ifndef CONFIG_ONENAND_SIM_DEVICE_ID
-+#define CONFIG_ONENAND_SIM_DEVICE_ID 0x04
-+#endif
-+#ifndef CONFIG_ONENAND_SIM_VERSION_ID
-+#define CONFIG_ONENAND_SIM_VERSION_ID 0x1e
-+#endif
-+
-+static int manuf_id = CONFIG_ONENAND_SIM_MANUFACTURER;
-+static int device_id = CONFIG_ONENAND_SIM_DEVICE_ID;
-+static int version_id = CONFIG_ONENAND_SIM_VERSION_ID;
-+
-+struct onenand_flash {
-+ void __iomem *base;
-+ void __iomem *data;
-+};
-+
-+#define ONENAND_CORE(flash) (flash->data)
-+#define ONENAND_CORE_SPARE(flash, this, offset) \
-+ ((flash->data) + (this->chipsize) + (offset >> 5))
-+
-+#define ONENAND_MAIN_AREA(this, offset) \
-+ (this->base + ONENAND_DATARAM + offset)
-+
-+#define ONENAND_SPARE_AREA(this, offset) \
-+ (this->base + ONENAND_SPARERAM + offset)
-+
-+#define ONENAND_GET_WP_STATUS(this) \
-+ (readw(this->base + ONENAND_REG_WP_STATUS))
-+
-+#define ONENAND_SET_WP_STATUS(v, this) \
-+ (writew(v, this->base + ONENAND_REG_WP_STATUS))
-+
-+/* It has all 0xff chars */
-+#define MAX_ONENAND_PAGESIZE (2048 + 64)
-+static unsigned char *ffchars;
-+
-+static struct mtd_partition os_partitions[] = {
-+ {
-+ .name = "OneNAND simulator partition",
-+ .offset = 0,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+/*
-+ * OneNAND simulator mtd
-+ */
-+struct onenand_info {
-+ struct mtd_info mtd;
-+ struct mtd_partition *parts;
-+ struct onenand_chip onenand;
-+ struct onenand_flash flash;
-+};
-+
-+struct onenand_info *info;
-+
-+#define DPRINTK(format, args...) \
-+do { \
-+ printk(KERN_DEBUG "%s[%d]: " format "\n", __func__, \
-+ __LINE__, ##args); \
-+} while (0)
-+
-+/**
-+ * onenand_lock_handle - Handle Lock scheme
-+ * @param this OneNAND device structure
-+ * @param cmd The command to be sent
-+ *
-+ * Send lock command to OneNAND device.
-+ * The lock scheme is depends on chip type.
-+ */
-+static void onenand_lock_handle(struct onenand_chip *this, int cmd)
-+{
-+ int block_lock_scheme;
-+ int status;
-+
-+ status = ONENAND_GET_WP_STATUS(this);
-+ block_lock_scheme = !(this->options & ONENAND_HAS_CONT_LOCK);
-+
-+ switch (cmd) {
-+ case ONENAND_CMD_UNLOCK:
-+ if (block_lock_scheme)
-+ ONENAND_SET_WP_STATUS(ONENAND_WP_US, this);
-+ else
-+ ONENAND_SET_WP_STATUS(status | ONENAND_WP_US, this);
-+ break;
-+
-+ case ONENAND_CMD_LOCK:
-+ if (block_lock_scheme)
-+ ONENAND_SET_WP_STATUS(ONENAND_WP_LS, this);
-+ else
-+ ONENAND_SET_WP_STATUS(status | ONENAND_WP_LS, this);
-+ break;
-+
-+ case ONENAND_CMD_LOCK_TIGHT:
-+ if (block_lock_scheme)
-+ ONENAND_SET_WP_STATUS(ONENAND_WP_LTS, this);
-+ else
-+ ONENAND_SET_WP_STATUS(status | ONENAND_WP_LTS, this);
-+ break;
-+
-+ default:
-+ break;
-+ }
-+}
-+
-+/**
-+ * onenand_bootram_handle - Handle BootRAM area
-+ * @param this OneNAND device structure
-+ * @param cmd The command to be sent
-+ *
-+ * Emulate BootRAM area. It is possible to do basic operation using BootRAM.
-+ */
-+static void onenand_bootram_handle(struct onenand_chip *this, int cmd)
-+{
-+ switch (cmd) {
-+ case ONENAND_CMD_READID:
-+ writew(manuf_id, this->base);
-+ writew(device_id, this->base + 2);
-+ writew(version_id, this->base + 4);
-+ break;
-+
-+ default:
-+ /* REVIST: Handle other commands */
-+ break;
-+ }
-+}
-+
-+/**
-+ * onenand_update_interrupt - Set interrupt register
-+ * @param this OneNAND device structure
-+ * @param cmd The command to be sent
-+ *
-+ * Update interrupt register. The status is depends on command.
-+ */
-+static void onenand_update_interrupt(struct onenand_chip *this, int cmd)
-+{
-+ int interrupt = ONENAND_INT_MASTER;
-+
-+ switch (cmd) {
-+ case ONENAND_CMD_READ:
-+ case ONENAND_CMD_READOOB:
-+ interrupt |= ONENAND_INT_READ;
-+ break;
-+
-+ case ONENAND_CMD_PROG:
-+ case ONENAND_CMD_PROGOOB:
-+ interrupt |= ONENAND_INT_WRITE;
-+ break;
-+
-+ case ONENAND_CMD_ERASE:
-+ interrupt |= ONENAND_INT_ERASE;
-+ break;
-+
-+ case ONENAND_CMD_RESET:
-+ interrupt |= ONENAND_INT_RESET;
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ writew(interrupt, this->base + ONENAND_REG_INTERRUPT);
-+}
-+
-+/**
-+ * onenand_check_overwrite - Check over-write if happend
-+ * @param dest The destination pointer
-+ * @param src The source pointer
-+ * @param count The length to be check
-+ * @return 0 on same, otherwise 1
-+ *
-+ * Compare the source with destination
-+ */
-+static int onenand_check_overwrite(void *dest, void *src, size_t count)
-+{
-+ unsigned int *s = (unsigned int *) src;
-+ unsigned int *d = (unsigned int *) dest;
-+ int i;
-+
-+ count >>= 2;
-+ for (i = 0; i < count; i++)
-+ if ((*s++ ^ *d++) != 0)
-+ return 1;
-+
-+ return 0;
-+}
-+
-+/**
-+ * onenand_data_handle - Handle OneNAND Core and DataRAM
-+ * @param this OneNAND device structure
-+ * @param cmd The command to be sent
-+ * @param dataram Which dataram used
-+ * @param offset The offset to OneNAND Core
-+ *
-+ * Copy data from OneNAND Core to DataRAM (read)
-+ * Copy data from DataRAM to OneNAND Core (write)
-+ * Erase the OneNAND Core (erase)
-+ */
-+static void onenand_data_handle(struct onenand_chip *this, int cmd,
-+ int dataram, unsigned int offset)
-+{
-+ struct mtd_info *mtd = &info->mtd;
-+ struct onenand_flash *flash = this->priv;
-+ int main_offset, spare_offset;
-+ void __iomem *src;
-+ void __iomem *dest;
-+ unsigned int i;
-+
-+ if (dataram) {
-+ main_offset = mtd->writesize;
-+ spare_offset = mtd->oobsize;
-+ } else {
-+ main_offset = 0;
-+ spare_offset = 0;
-+ }
-+
-+ switch (cmd) {
-+ case ONENAND_CMD_READ:
-+ src = ONENAND_CORE(flash) + offset;
-+ dest = ONENAND_MAIN_AREA(this, main_offset);
-+ memcpy(dest, src, mtd->writesize);
-+ /* Fall through */
-+
-+ case ONENAND_CMD_READOOB:
-+ src = ONENAND_CORE_SPARE(flash, this, offset);
-+ dest = ONENAND_SPARE_AREA(this, spare_offset);
-+ memcpy(dest, src, mtd->oobsize);
-+ break;
-+
-+ case ONENAND_CMD_PROG:
-+ src = ONENAND_MAIN_AREA(this, main_offset);
-+ dest = ONENAND_CORE(flash) + offset;
-+ /* To handle partial write */
-+ for (i = 0; i < (1 << mtd->subpage_sft); i++) {
-+ int off = i * this->subpagesize;
-+ if (!memcmp(src + off, ffchars, this->subpagesize))
-+ continue;
-+ if (memcmp(dest + off, ffchars, this->subpagesize) &&
-+ onenand_check_overwrite(dest + off, src + off, this->subpagesize))
-+ printk(KERN_ERR "over-write happend at 0x%08x\n", offset);
-+ memcpy(dest + off, src + off, this->subpagesize);
-+ }
-+ /* Fall through */
-+
-+ case ONENAND_CMD_PROGOOB:
-+ src = ONENAND_SPARE_AREA(this, spare_offset);
-+ /* Check all data is 0xff chars */
-+ if (!memcmp(src, ffchars, mtd->oobsize))
-+ break;
-+
-+ dest = ONENAND_CORE_SPARE(flash, this, offset);
-+ if (memcmp(dest, ffchars, mtd->oobsize) &&
-+ onenand_check_overwrite(dest, src, mtd->oobsize))
-+ printk(KERN_ERR "OOB: over-write happend at 0x%08x\n",
-+ offset);
-+ memcpy(dest, src, mtd->oobsize);
-+ break;
-+
-+ case ONENAND_CMD_ERASE:
-+ memset(ONENAND_CORE(flash) + offset, 0xff, mtd->erasesize);
-+ memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff,
-+ (mtd->erasesize >> 5));
-+ break;
-+
-+ default:
-+ break;
-+ }
-+}
-+
-+/**
-+ * onenand_command_handle - Handle command
-+ * @param this OneNAND device structure
-+ * @param cmd The command to be sent
-+ *
-+ * Emulate OneNAND command.
-+ */
-+static void onenand_command_handle(struct onenand_chip *this, int cmd)
-+{
-+ unsigned long offset = 0;
-+ int block = -1, page = -1, bufferram = -1;
-+ int dataram = 0;
-+
-+ switch (cmd) {
-+ case ONENAND_CMD_UNLOCK:
-+ case ONENAND_CMD_LOCK:
-+ case ONENAND_CMD_LOCK_TIGHT:
-+ case ONENAND_CMD_UNLOCK_ALL:
-+ onenand_lock_handle(this, cmd);
-+ break;
-+
-+ case ONENAND_CMD_BUFFERRAM:
-+ /* Do nothing */
-+ return;
-+
-+ default:
-+ block = (int) readw(this->base + ONENAND_REG_START_ADDRESS1);
-+ if (block & (1 << ONENAND_DDP_SHIFT)) {
-+ block &= ~(1 << ONENAND_DDP_SHIFT);
-+ /* The half of chip block */
-+ block += this->chipsize >> (this->erase_shift + 1);
-+ }
-+ if (cmd == ONENAND_CMD_ERASE)
-+ break;
-+
-+ page = (int) readw(this->base + ONENAND_REG_START_ADDRESS8);
-+ page = (page >> ONENAND_FPA_SHIFT);
-+ bufferram = (int) readw(this->base + ONENAND_REG_START_BUFFER);
-+ bufferram >>= ONENAND_BSA_SHIFT;
-+ bufferram &= ONENAND_BSA_DATARAM1;
-+ dataram = (bufferram == ONENAND_BSA_DATARAM1) ? 1 : 0;
-+ break;
-+ }
-+
-+ if (block != -1)
-+ offset += block << this->erase_shift;
-+
-+ if (page != -1)
-+ offset += page << this->page_shift;
-+
-+ onenand_data_handle(this, cmd, dataram, offset);
-+
-+ onenand_update_interrupt(this, cmd);
-+}
-+
-+/**
-+ * onenand_writew - [OneNAND Interface] Emulate write operation
-+ * @param value value to write
-+ * @param addr address to write
-+ *
-+ * Write OneNAND register with value
-+ */
-+static void onenand_writew(unsigned short value, void __iomem * addr)
-+{
-+ struct onenand_chip *this = info->mtd.priv;
-+
-+ /* BootRAM handling */
-+ if (addr < this->base + ONENAND_DATARAM) {
-+ onenand_bootram_handle(this, value);
-+ return;
-+ }
-+ /* Command handling */
-+ if (addr == this->base + ONENAND_REG_COMMAND)
-+ onenand_command_handle(this, value);
-+
-+ writew(value, addr);
-+}
-+
-+/**
-+ * flash_init - Initialize OneNAND simulator
-+ * @param flash OneNAND simulaotr data strucutres
-+ *
-+ * Initialize OneNAND simulator.
-+ */
-+static int __init flash_init(struct onenand_flash *flash)
-+{
-+ int density, size;
-+ int buffer_size;
-+
-+ flash->base = kzalloc(131072, GFP_KERNEL);
-+ if (!flash->base) {
-+ printk(KERN_ERR "Unable to allocate base address.\n");
-+ return -ENOMEM;
-+ }
-+
-+ density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT;
-+ size = ((16 << 20) << density);
-+
-+ ONENAND_CORE(flash) = vmalloc(size + (size >> 5));
-+ if (!ONENAND_CORE(flash)) {
-+ printk(KERN_ERR "Unable to allocate nand core address.\n");
-+ kfree(flash->base);
-+ return -ENOMEM;
-+ }
-+
-+ memset(ONENAND_CORE(flash), 0xff, size + (size >> 5));
-+
-+ /* Setup registers */
-+ writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID);
-+ writew(device_id, flash->base + ONENAND_REG_DEVICE_ID);
-+ writew(version_id, flash->base + ONENAND_REG_VERSION_ID);
-+
-+ if (density < 2)
-+ buffer_size = 0x0400; /* 1KiB page */
-+ else
-+ buffer_size = 0x0800; /* 2KiB page */
-+ writew(buffer_size, flash->base + ONENAND_REG_DATA_BUFFER_SIZE);
-+
-+ return 0;
-+}
-+
-+/**
-+ * flash_exit - Clean up OneNAND simulator
-+ * @param flash OneNAND simulaotr data strucutres
-+ *
-+ * Clean up OneNAND simulator.
-+ */
-+static void flash_exit(struct onenand_flash *flash)
-+{
-+ vfree(ONENAND_CORE(flash));
-+ kfree(flash->base);
-+ kfree(flash);
-+}
-+
-+static int __init onenand_sim_init(void)
-+{
-+ /* Allocate all 0xff chars pointer */
-+ ffchars = kmalloc(MAX_ONENAND_PAGESIZE, GFP_KERNEL);
-+ if (!ffchars) {
-+ printk(KERN_ERR "Unable to allocate ff chars.\n");
-+ return -ENOMEM;
-+ }
-+ memset(ffchars, 0xff, MAX_ONENAND_PAGESIZE);
-+
-+ /* Allocate OneNAND simulator mtd pointer */
-+ info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL);
-+ if (!info) {
-+ printk(KERN_ERR "Unable to allocate core structures.\n");
-+ kfree(ffchars);
-+ return -ENOMEM;
-+ }
-+
-+ /* Override write_word function */
-+ info->onenand.write_word = onenand_writew;
-+
-+ if (flash_init(&info->flash)) {
-+ printk(KERN_ERR "Unable to allocat flash.\n");
-+ kfree(ffchars);
-+ kfree(info);
-+ return -ENOMEM;
-+ }
-+
-+ info->parts = os_partitions;
-+
-+ info->onenand.base = info->flash.base;
-+ info->onenand.priv = &info->flash;
-+
-+ info->mtd.name = "OneNAND simulator";
-+ info->mtd.priv = &info->onenand;
-+ info->mtd.owner = THIS_MODULE;
-+
-+ if (onenand_scan(&info->mtd, 1)) {
-+ flash_exit(&info->flash);
-+ kfree(ffchars);
-+ kfree(info);
-+ return -ENXIO;
-+ }
-+
-+ add_mtd_partitions(&info->mtd, info->parts, ARRAY_SIZE(os_partitions));
-+
-+ return 0;
-+}
-+
-+static void __exit onenand_sim_exit(void)
-+{
-+ struct onenand_chip *this = info->mtd.priv;
-+ struct onenand_flash *flash = this->priv;
-+
-+ onenand_release(&info->mtd);
-+ flash_exit(flash);
-+ kfree(ffchars);
-+ kfree(info);
-+}
-+
-+module_init(onenand_sim_init);
-+module_exit(onenand_sim_exit);
-+
-+MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
-+MODULE_DESCRIPTION("The OneNAND flash simulator");
-+MODULE_LICENSE("GPL");
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 1938d6d..cc01dbd 100644
--- a/drivers/net/forcedeth.c
@@ -11849,380 +2283,6 @@ index 7dcaa09..eb69d4d 100644
* Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size
* but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
* Re-allocate the region if needed...
-diff --git a/drivers/sysprof/Kconfig b/drivers/sysprof/Kconfig
-new file mode 100644
-index 0000000..b99c13a
---- /dev/null
-+++ b/drivers/sysprof/Kconfig
-@@ -0,0 +1,12 @@
-+
-+menu "Sysprof"
-+
-+config SYSPROF
-+ tristate "Sysprof support"
-+ help
-+ Say M here to include the sysprof-module.
-+
-+ Sysprof is a sampling profiler that uses a kernel module,
-+ sysprof-module, to generate stacktraces which are then interpreted by
-+ the userspace program "sysprof".
-+endmenu
-diff --git a/drivers/sysprof/Makefile b/drivers/sysprof/Makefile
-new file mode 100644
-index 0000000..cd465e9
---- /dev/null
-+++ b/drivers/sysprof/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_SYSPROF) += sysprof-module.o
-diff --git a/drivers/sysprof/config.h b/drivers/sysprof/config.h
-new file mode 100644
-index 0000000..bb62689
---- /dev/null
-+++ b/drivers/sysprof/config.h
-@@ -0,0 +1,23 @@
-+/* config.h. Generated by configure. */
-+/* config.h.in. Generated from configure.ac by autoheader. */
-+
-+/* Look for global separate debug info in this path */
-+#define DEBUGDIR "/usr/local/lib/debug"
-+
-+/* Define to 1 if you have the `iberty' library (-liberty). */
-+/* #undef HAVE_LIBIBERTY */
-+
-+/* Define to the address where bug reports for this package should be sent. */
-+#define PACKAGE_BUGREPORT ""
-+
-+/* Define to the full name of this package. */
-+#define PACKAGE_NAME "sysprof"
-+
-+/* Define to the full name and version of this package. */
-+#define PACKAGE_STRING "sysprof 1.0.8"
-+
-+/* Define to the one symbol short name of this package. */
-+#define PACKAGE_TARNAME "sysprof"
-+
-+/* Define to the version of this package. */
-+#define PACKAGE_VERSION "1.0.8"
-diff --git a/drivers/sysprof/sysprof-module.c b/drivers/sysprof/sysprof-module.c
-new file mode 100644
-index 0000000..36e0b51
---- /dev/null
-+++ b/drivers/sysprof/sysprof-module.c
-@@ -0,0 +1,271 @@
-+/* -*- c-basic-offset: 8 -*- */
-+
-+/* Sysprof -- Sampling, systemwide CPU profiler
-+ * Copyright 2004, Red Hat, Inc.
-+ * Copyright 2004, 2005, Soeren Sandmann
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+#ifdef CONFIG_SMP
-+# define __SMP__
-+#endif
-+#include <asm/atomic.h>
-+#include <linux/kernel.h> /* Needed for KERN_ALERT */
-+#include <linux/module.h> /* Needed by all modules */
-+#include <linux/sched.h>
-+
-+#include <linux/proc_fs.h>
-+#include <asm/uaccess.h>
-+#include <linux/poll.h>
-+#include <linux/highmem.h>
-+#include <linux/pagemap.h>
-+#include <linux/profile.h>
-+
-+#include "sysprof-module.h"
-+
-+#include "config.h"
-+
-+#include <linux/version.h>
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
-+#include <linux/config.h>
-+#endif
-+
-+#if !CONFIG_PROFILING
-+# error Sysprof needs a kernel with profiling support compiled in.
-+#endif
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11)
-+# error Sysprof needs a Linux 2.6.11 kernel or later
-+#endif
-+#include <linux/kallsyms.h>
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Soeren Sandmann (sandmann@daimi.au.dk)");
-+
-+#define SAMPLES_PER_SECOND (200)
-+#define INTERVAL ((HZ <= SAMPLES_PER_SECOND)? 1 : (HZ / SAMPLES_PER_SECOND))
-+#define N_TRACES 256
-+
-+static SysprofStackTrace stack_traces[N_TRACES];
-+static SysprofStackTrace * head = &stack_traces[0];
-+static SysprofStackTrace * tail = &stack_traces[0];
-+DECLARE_WAIT_QUEUE_HEAD (wait_for_trace);
-+DECLARE_WAIT_QUEUE_HEAD (wait_for_exit);
-+
-+/* Macro the names of the registers that are used on each architecture */
-+#if defined(CONFIG_X86_64)
-+# define REG_FRAME_PTR rbp
-+# define REG_INS_PTR rip
-+# define REG_STACK_PTR rsp
-+#elif defined(CONFIG_X86)
-+# define REG_FRAME_PTR ebp
-+# define REG_INS_PTR eip
-+# define REG_STACK_PTR esp
-+#else
-+# error Sysprof only supports the i386 and x86-64 architectures
-+#endif
-+
-+typedef struct userspace_reader userspace_reader;
-+struct userspace_reader
-+{
-+ struct task_struct *task;
-+ unsigned long cache_address;
-+ unsigned long *cache;
-+};
-+
-+typedef struct StackFrame StackFrame;
-+struct StackFrame {
-+ unsigned long next;
-+ unsigned long return_address;
-+};
-+
-+struct work_struct work;
-+
-+static int
-+read_frame (void *frame_pointer, StackFrame *frame)
-+{
-+#if 0
-+ /* This is commented out because we seem to be called with
-+ * (current_thread_info()->addr_limit.seg)) == 0
-+ * which means access_ok() _always_ fails.
-+ *
-+ * Not sure why (or if) this isn't the case for oprofile
-+ */
-+ if (!access_ok(VERIFY_READ, frame_pointer, sizeof(StackFrame)))
-+ return 1;
-+#endif
-+
-+ if (__copy_from_user_inatomic (
-+ frame, frame_pointer, sizeof (StackFrame)))
-+ return 1;
-+
-+ return 0;
-+}
-+
-+DEFINE_PER_CPU(int, n_samples);
-+
-+static int
-+timer_notify (struct pt_regs *regs)
-+{
-+ SysprofStackTrace *trace = head;
-+ int i;
-+ int is_user;
-+ static atomic_t in_timer_notify = ATOMIC_INIT(1);
-+ int n;
-+
-+ n = ++get_cpu_var(n_samples);
-+ put_cpu_var(n_samples);
-+
-+ if (n % INTERVAL != 0)
-+ return 0;
-+
-+ /* 0: locked, 1: unlocked */
-+
-+ if (!atomic_dec_and_test(&in_timer_notify))
-+ goto out;
-+
-+ is_user = user_mode(regs);
-+
-+ if (!current || current->pid == 0)
-+ goto out;
-+
-+ if (is_user && current->state != TASK_RUNNING)
-+ goto out;
-+
-+ if (!is_user)
-+ {
-+ /* kernel */
-+
-+ trace->pid = current->pid;
-+ trace->truncated = 0;
-+ trace->n_addresses = 1;
-+
-+ /* 0x1 is taken by sysprof to mean "in kernel" */
-+ trace->addresses[0] = (void *)0x1;
-+ }
-+ else
-+ {
-+ StackFrame *frame_pointer;
-+ StackFrame frame;
-+ memset(trace, 0, sizeof (SysprofStackTrace));
-+
-+ trace->pid = current->pid;
-+ trace->truncated = 0;
-+
-+ i = 0;
-+
-+ trace->addresses[i++] = (void *)regs->REG_INS_PTR;
-+
-+ frame_pointer = (void *)regs->REG_FRAME_PTR;
-+
-+ while (read_frame (frame_pointer, &frame) == 0 &&
-+ i < SYSPROF_MAX_ADDRESSES &&
-+ (unsigned long)frame_pointer >= regs->REG_STACK_PTR)
-+ {
-+ trace->addresses[i++] = (void *)frame.return_address;
-+ frame_pointer = (StackFrame *)frame.next;
-+ }
-+
-+ trace->n_addresses = i;
-+
-+ if (i == SYSPROF_MAX_ADDRESSES)
-+ trace->truncated = 1;
-+ else
-+ trace->truncated = 0;
-+ }
-+
-+ if (head++ == &stack_traces[N_TRACES - 1])
-+ head = &stack_traces[0];
-+
-+ wake_up (&wait_for_trace);
-+
-+out:
-+ atomic_inc(&in_timer_notify);
-+ return 0;
-+}
-+
-+static int
-+procfile_read(char *buffer,
-+ char **buffer_location,
-+ off_t offset,
-+ int buffer_len,
-+ int *eof,
-+ void *data)
-+{
-+ if (head == tail)
-+ return -EWOULDBLOCK;
-+
-+ *buffer_location = (char *)tail;
-+
-+ BUG_ON(tail->pid == 0);
-+
-+ if (tail++ == &stack_traces[N_TRACES - 1])
-+ tail = &stack_traces[0];
-+
-+ return sizeof (SysprofStackTrace);
-+}
-+
-+struct proc_dir_entry *trace_proc_file;
-+static unsigned int
-+procfile_poll(struct file *filp, poll_table *poll_table)
-+{
-+ if (head != tail)
-+ return POLLIN | POLLRDNORM;
-+
-+ poll_wait(filp, &wait_for_trace, poll_table);
-+
-+ if (head != tail)
-+ return POLLIN | POLLRDNORM;
-+
-+ return 0;
-+}
-+
-+int
-+init_module(void)
-+{
-+ static struct file_operations fops;
-+
-+ trace_proc_file =
-+ create_proc_entry ("sysprof-trace", S_IFREG | S_IRUGO, &proc_root);
-+
-+ if (!trace_proc_file)
-+ return 1;
-+
-+ fops = *trace_proc_file->proc_fops;
-+ fops.poll = procfile_poll;
-+
-+ trace_proc_file->read_proc = procfile_read;
-+ trace_proc_file->proc_fops = &fops;
-+ trace_proc_file->size = sizeof (SysprofStackTrace);
-+
-+ register_timer_hook (timer_notify);
-+
-+ printk(KERN_ALERT "sysprof: loaded (%s)\n", PACKAGE_VERSION);
-+
-+ return 0;
-+}
-+
-+void
-+cleanup_module(void)
-+{
-+ unregister_timer_hook (timer_notify);
-+
-+ remove_proc_entry("sysprof-trace", &proc_root);
-+
-+ printk(KERN_ALERT "sysprof: unloaded\n");
-+}
-+
-diff --git a/drivers/sysprof/sysprof-module.h b/drivers/sysprof/sysprof-module.h
-new file mode 100644
-index 0000000..66a11ae
---- /dev/null
-+++ b/drivers/sysprof/sysprof-module.h
-@@ -0,0 +1,37 @@
-+/* Sysprof -- Sampling, systemwide CPU profiler
-+ * Copyright 2004, Red Hat, Inc.
-+ * Copyright 2004, 2005, Soeren Sandmann
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+#ifndef SYSPROF_MODULE_H
-+#define SYSPROF_MODULE_H
-+
-+typedef struct SysprofStackTrace SysprofStackTrace;
-+
-+#define SYSPROF_MAX_ADDRESSES 512
-+
-+struct SysprofStackTrace
-+{
-+ int pid; /* -1 if in kernel */
-+ int truncated;
-+ int n_addresses; /* note: this can be 1 if the process was compiled
-+ * with -fomit-frame-pointer or is otherwise weird
-+ */
-+ void *addresses[SYSPROF_MAX_ADDRESSES];
-+};
-+
-+#endif
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 5216c11..3e3df7e 100644
--- a/drivers/video/Kconfig
@@ -12507,254 +2567,6 @@ index 0af33f3..d20b877 100644
/* Display controller registers */
#define DC_UNLOCK 0x00
-diff --git a/drivers/video/geode/geode_regs.h b/drivers/video/geode/geode_regs.h
-new file mode 100644
-index 0000000..9e75505
---- /dev/null
-+++ b/drivers/video/geode/geode_regs.h
-@@ -0,0 +1,242 @@
-+/* This header file defines the registers and suspend/resume
-+ structures for the Geode GX and LX. The lxfb driver defines
-+ _GEODELX_ before including this file, which will unlock the
-+ extra registers that are only valid for LX.
-+*/
-+
-+#ifndef _GEODE_REGS_H_
-+#define _GEODE_REGS_H_
-+
-+/* MSRs */
-+
-+#define GX_VP_MSR_PAD_SELECT 0xC0002011
-+#define LX_VP_MSR_PAD_SELECT 0x48000011
-+
-+#define GEODE_MSR_GLCP_DOTPLL 0x4c000015
-+
-+#define GLCP_DOTPLL_RESET (1 << 0)
-+#define GLCP_DOTPLL_BYPASS (1 << 15)
-+#define GLCP_DOTPLL_HALFPIX (1 << 24)
-+#define GLCP_DOTPLL_LOCK (1 << 25)
-+
-+/* Registers */
-+#define VP_FP_START 0x400
-+
-+
-+#ifdef _GEODELX_
-+
-+#define GP_REG_SIZE 0x7C
-+#define DC_REG_SIZE 0xF0
-+#define VP_REG_SIZE 0x158
-+#define FP_REG_SIZE 0x70
-+
-+#else
-+
-+#define GP_REG_SIZE 0x50
-+#define DC_REG_SIZE 0x90
-+#define VP_REG_SIZE 0x138
-+#define FP_REG_SIZE 0x70
-+
-+#endif
-+
-+#define DC_PAL_SIZE 0x105
-+
-+struct geoderegs {
-+
-+ struct {
-+ u64 padsel;
-+ u64 dotpll;
-+
-+#ifdef _GEODELX_
-+ u64 dfglcfg;
-+ u64 dcspare;
-+#else
-+ u64 rstpll;
-+#endif
-+ } msr;
-+
-+ union {
-+ unsigned char b[GP_REG_SIZE];
-+ struct {
-+ u32 dst_offset; /* 0x00 */
-+ u32 src_offset; /* 0x04 */
-+ u32 stride; /* 0x08 */
-+ u32 wid_height; /* 0x0C */
-+ u32 src_color_fg; /* 0x10 */
-+ u32 src_color_bg; /* 0x14 */
-+ u32 pat_color_0; /* 0x18 */
-+ u32 pat_color_1; /* 0x1C */
-+ u32 pat_color_2; /* 0x20 */
-+ u32 pat_color_3; /* 0x24 */
-+ u32 pat_color_4; /* 0x28 */
-+ u32 pat_color_5; /* 0x2C */
-+ u32 pat_data_0; /* 0x30 */
-+ u32 pat_data_1; /* 0x34 */
-+ u32 raster_mode; /* 0x38 */
-+ u32 vector_mode; /* 0x3C */
-+ u32 blt_mode; /* 0x40 */
-+ u32 blit_status; /* 0x4C */
-+ u32 hst_src; /* 0x48 */
-+ u32 base_offset; /* 0x4C */
-+
-+#ifdef _GEODELX_
-+ u32 cmd_top; /* 0x50 */
-+ u32 cmd_bot; /* 0x54 */
-+ u32 cmd_read; /* 0x58 */
-+ u32 cmd_write; /* 0x5C */
-+ u32 ch3_offset; /* 0x60 */
-+ u32 ch3_mode_str; /* 0x64 */
-+ u32 ch3_width; /* 0x68 */
-+ u32 ch3_hsrc; /* 0x6C */
-+ u32 lut_index; /* 0x70 */
-+ u32 lut_data; /* 0x74 */
-+ u32 int_cntrl; /* 0x78 */
-+#endif
-+ } r;
-+ } gp;
-+
-+ union {
-+ unsigned char b[DC_REG_SIZE];
-+
-+ struct {
-+ u32 unlock; /* 0x00 */
-+ u32 gcfg; /* 0x04 */
-+ u32 dcfg; /* 0x08 */
-+ u32 arb; /* 0x0C */
-+ u32 fb_st_offset; /* 0x10 */
-+ u32 cb_st_offset; /* 0x14 */
-+ u32 curs_st_offset; /* 0x18 */
-+ u32 icon_st_offset; /* 0x1C */
-+ u32 vid_y_st_offset; /* 0x20 */
-+ u32 vid_u_st_offset; /* 0x24 */
-+ u32 vid_v_st_offset; /* 0x28 */
-+ u32 dctop; /* 0x2c */
-+ u32 line_size; /* 0x30 */
-+ u32 gfx_pitch; /* 0x34 */
-+ u32 vid_yuv_pitch; /* 0x38 */
-+ u32 rsvd2; /* 0x3C */
-+ u32 h_active_timing; /* 0x40 */
-+ u32 h_blank_timing; /* 0x44 */
-+ u32 h_sync_timing; /* 0x48 */
-+ u32 rsvd3; /* 0x4C */
-+ u32 v_active_timing; /* 0x50 */
-+ u32 v_blank_timing; /* 0x54 */
-+ u32 v_sync_timing; /* 0x58 */
-+ u32 fbactive; /* 0x5C */
-+ u32 dc_cursor_x; /* 0x60 */
-+ u32 dc_cursor_y; /* 0x64 */
-+ u32 dc_icon_x; /* 0x68 */
-+ u32 dc_line_cnt; /* 0x6C */
-+ u32 rsvd5; /* 0x70 - palette address */
-+ u32 rsvd6; /* 0x74 - palette data */
-+ u32 dfifo_diag; /* 0x78 */
-+ u32 cfifo_diag; /* 0x7C */
-+ u32 dc_vid_ds_delta; /* 0x80 */
-+ u32 gliu0_mem_offset; /* 0x84 */
-+ u32 dv_ctl; /* 0x88 - added by LX */
-+ u32 dv_acc; /* 0x8C */
-+
-+#ifdef _GEODELX_
-+ u32 gfx_scale;
-+ u32 irq_filt_ctl;
-+ u32 filt_coeff1;
-+ u32 filt_coeff2;
-+ u32 vbi_event_ctl;
-+ u32 vbi_odd_ctl;
-+ u32 vbi_hor;
-+ u32 vbi_ln_odd;
-+ u32 vbi_ln_event;
-+ u32 vbi_pitch;
-+ u32 clr_key;
-+ u32 clr_key_mask;
-+ u32 clr_key_x;
-+ u32 clr_key_y;
-+ u32 irq;
-+ u32 rsvd8;
-+ u32 genlk_ctrl;
-+ u32 vid_even_y_st_offset; /* 0xD8 */
-+ u32 vid_even_u_st_offset; /* 0xDC */
-+ u32 vid_even_v_st_offset; /* 0xE0 */
-+ u32 v_active_even_timing; /* 0xE4 */
-+ u32 v_blank_even_timing; /* 0xE8 */
-+ u32 v_sync_even_timing; /* 0xEC */
-+#endif
-+ } r;
-+ } dc;
-+
-+ union {
-+ unsigned char b[VP_REG_SIZE];
-+
-+ struct {
-+ u64 vcfg; /* 0x00 */
-+ u64 dcfg; /* 0x08 */
-+ u64 vx; /* 0x10 */
-+ u64 vy; /* 0x18 */
-+ u64 vs; /* 0x20 */
-+ u64 vck; /* 0x28 */
-+ u64 vcm; /* 0x30 */
-+ u64 rsvd1; /* 0x38 - Gamma address*/
-+ u64 rsvd2; /* 0x40 - Gamma data*/
-+ u64 rsvd3; /* 0x48 */
-+ u64 misc; /* 0x50 */
-+ u64 ccs; /* 0x58 */
-+ u64 rsvd4[3]; /* 0x60-0x70 */
-+ u64 vdc; /* 0x78 */
-+ u64 vco; /* 0x80 */
-+ u64 crc; /* 0x88 */
-+ u64 crc32; /* 0x90 */
-+ u64 vde; /* 0x98 */
-+ u64 cck; /* 0xA0 */
-+ u64 ccm; /* 0xA8 */
-+ u64 cc1; /* 0xB0 */
-+ u64 cc2; /* 0xB8 */
-+ u64 a1x; /* 0xC0 */
-+ u64 a1y; /* 0xC8 */
-+ u64 a1c; /* 0xD0 */
-+ u64 a1t; /* 0xD8 */
-+ u64 a2x; /* 0xE0 */
-+ u64 a2y; /* 0xE8 */
-+ u64 a2c; /* 0xF0 */
-+ u64 a2t; /* 0xF8 */
-+ u64 a3x; /* 0x100 */
-+ u64 a3y; /* 0x108 */
-+ u64 a3c; /* 0x110 */
-+ u64 a3t; /* 0x118 */
-+ u64 vrr; /* 0x120 */
-+ u64 awt; /* 0x128 */
-+ u64 vtm; /* 0x130 */
-+#ifdef _GEODELX_
-+ u64 vye; /* 0x138 */
-+ u64 a1ye; /* 0x140 */
-+ u32 a2ye; /* 0x148 */
-+ u32 a3ye; /* 0x150 */
-+#endif
-+ } r;
-+ } vp;
-+
-+ union {
-+ unsigned char b[FP_REG_SIZE];
-+
-+ struct {
-+ u64 pt1; /* 0x400 */
-+ u64 pt2; /* 0x408 */
-+ u64 pm; /* 0x410 */
-+ u64 dfc; /* 0x418 */
-+ u64 blfsr; /* 0x420 */
-+ u64 rlfsr; /* 0x428 */
-+ u64 fmi; /* 0x430 */
-+ u64 fmd; /* 0x438 */
-+ u64 rsvd; /* 0x440 */
-+ u64 dca; /* 0x448 */
-+ u64 dmd; /* 0x450 */
-+ u64 crc; /* 0x458 */
-+ u64 fbb; /* 0x460 */
-+ u64 crc32; /* 0x468 */
-+ } r;
-+ } fp;
-+
-+ u32 pal[DC_PAL_SIZE];
-+ u32 gamma[256];
-+};
-+
-+#endif
diff --git a/drivers/video/geode/geodefb.h b/drivers/video/geode/geodefb.h
index ae04820..0214d11 100644
--- a/drivers/video/geode/geodefb.h
@@ -14036,284 +3848,6 @@ index 4fbc99b..47ed9de 100644
+ lx_power_on = 1;
+ return 0;
+}
-diff --git a/drivers/video/geode/suspend_gx.c b/drivers/video/geode/suspend_gx.c
-new file mode 100644
-index 0000000..43c25be
---- /dev/null
-+++ b/drivers/video/geode/suspend_gx.c
-@@ -0,0 +1,272 @@
-+#include <linux/fb.h>
-+#include <asm/io.h>
-+#include <asm/msr.h>
-+
-+#include "geodefb.h"
-+#include "video_gx.h"
-+
-+void gx_set_dotpll(struct fb_info *info, struct geoderegs *regs)
-+{
-+ int timeout = 1000;
-+
-+ u64 rstpll, dotpll;
-+
-+ rdmsrl(MSR_GLCP_SYS_RSTPLL, rstpll);
-+ rdmsrl(MSR_GLCP_DOTPLL, dotpll);
-+
-+ dotpll &= 0x00000000ffffffffull;
-+ dotpll |= regs->msr.dotpll & 0xffffffff00000000ull;
-+
-+ dotpll |= MSR_GLCP_DOTPLL_DOTRESET;
-+ dotpll &= ~MSR_GLCP_DOTPLL_BYPASS;
-+
-+ wrmsrl(MSR_GLCP_DOTPLL, dotpll);
-+
-+ rstpll |= (regs->msr.rstpll &
-+ ( MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 |
-+ MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 |
-+ MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3));
-+
-+ wrmsrl(MSR_GLCP_SYS_RSTPLL, rstpll);
-+ dotpll &= ~(MSR_GLCP_DOTPLL_DOTRESET);
-+ wrmsrl(MSR_GLCP_DOTPLL, dotpll);
-+
-+ do {
-+ rdmsrl(MSR_GLCP_DOTPLL, dotpll);
-+ } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
-+}
-+
-+/* FIXME: Make sure nothing is read to clear */
-+
-+void gx_save_regs(struct fb_info *info, struct geoderegs *regs)
-+{
-+ struct geodefb_par *par = info->par;
-+ int i;
-+
-+ /* Wait for the BLT engine to stop being busy */
-+ while(readl(par->gp_regs + 0x44) & 0x05);
-+
-+ rdmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel);
-+ rdmsrl(MSR_GLCP_DOTPLL, regs->msr.dotpll);
-+ rdmsrl(MSR_GLCP_SYS_RSTPLL, regs->msr.rstpll);
-+
-+ writel(0x4758, par->dc_regs + 0x00);
-+
-+ memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE);
-+ memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE);
-+ memcpy(regs->vp.b, par->vid_regs, VP_REG_SIZE);
-+ memcpy(regs->fp.b, par->vid_regs + 0x400, FP_REG_SIZE);
-+
-+ /* Save the palettes */
-+ writel(0, par->dc_regs + 0x70);
-+
-+ for(i = 0; i < DC_PAL_SIZE; i++)
-+ regs->pal[i] = readl(par->dc_regs + 0x74);
-+
-+ writel(0, par->vid_regs + 0x38);
-+
-+ for(i = 0; i < 0xFF; i++)
-+ regs->gamma[i] = readl(par->vid_regs + 0x40);
-+}
-+
-+void gx_restore_regs(struct fb_info *info, struct geoderegs *regs)
-+{
-+ struct geodefb_par *par = info->par;
-+ u32 val, i;
-+
-+ /* DOTPLL */
-+ gx_set_dotpll(info, regs);
-+
-+ /* GP */
-+
-+ writel(regs->gp.r.dst_offset, par->gp_regs + 0x00);
-+ writel(regs->gp.r.src_offset, par->gp_regs + 0x04);
-+ writel(regs->gp.r.stride, par->gp_regs + 0x08);
-+ writel(regs->gp.r.wid_height, par->gp_regs + 0x0C);
-+ writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10);
-+ writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14);
-+ writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18);
-+ writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C);
-+ writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20);
-+ writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24);
-+ writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28);
-+ writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C);
-+ writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30);
-+ writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34);
-+
-+ /* Don't write the raster / vector / blt mode regs */
-+ /* status register is read only */
-+
-+ writel(regs->gp.r.hst_src, par->gp_regs + 0x48);
-+ writel(regs->gp.r.base_offset, par->gp_regs + 0x4c);
-+
-+ /* DC */
-+
-+ /* Write the unlock value */
-+ writel(0x4758, par->dc_regs + 0x00);
-+
-+ writel(0, par->dc_regs + 0x70);
-+
-+ for(i = 0; i < DC_PAL_SIZE; i++)
-+ writel(regs->pal[i], par->dc_regs + 0x74);
-+
-+ /* Write the gcfg register without the enables */
-+ writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04);
-+
-+ /* Write the vcfg register without the enables */
-+ writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08);
-+
-+ /* Write the rest of the active registers */
-+
-+ writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10);
-+ writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14);
-+ writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18);
-+ writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C);
-+ writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20);
-+ writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24);
-+ writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28);
-+ writel(regs->dc.r.line_size, par->dc_regs + 0x30);
-+ writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34);
-+ writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38);
-+ writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40);
-+ writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44);
-+ writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48);
-+ writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50);
-+ writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54);
-+ writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58);
-+ writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60);
-+ writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64);
-+ writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68);
-+
-+ /* Don't write the line_cnt or diag registers */
-+
-+ writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80);
-+ writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84);
-+ writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C);
-+
-+ /* VP */
-+
-+ /* MSR */
-+ wrmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel);
-+
-+ writel(0, par->vid_regs + 0x38);
-+
-+ for(i = 0; i < 0xFF; i++)
-+ writel((u32) regs->gamma[i], par->vid_regs + 0x40);
-+
-+ /* Don't enable video yet */
-+ writel((u32) regs->vp.r.vcfg & ~0x01, par->vid_regs + 0x00);
-+
-+ /* Don't enable the CRT yet */
-+ writel((u32) regs->vp.r.dcfg & ~0x0F, par->vid_regs + 0x08);
-+
-+ /* Write the rest of the VP registers */
-+
-+ writel((u32) regs->vp.r.vx, par->vid_regs + 0x10);
-+ writel((u32) regs->vp.r.vy, par->vid_regs + 0x18);
-+ writel((u32) regs->vp.r.vs, par->vid_regs + 0x20);
-+ writel((u32) regs->vp.r.vck, par->vid_regs + 0x28);
-+ writel((u32) regs->vp.r.vcm, par->vid_regs + 0x30);
-+ writel((u32) regs->vp.r.misc, par->vid_regs + 0x50);
-+ writel((u32) regs->vp.r.ccs, par->vid_regs + 0x58);
-+ writel((u32) regs->vp.r.vdc, par->vid_regs + 0x78);
-+ writel((u32) regs->vp.r.vco, par->vid_regs + 0x80);
-+ writel((u32) regs->vp.r.crc, par->vid_regs + 0x88);
-+ writel((u32) regs->vp.r.vde, par->vid_regs + 0x98);
-+ writel((u32) regs->vp.r.cck, par->vid_regs + 0xA0);
-+ writel((u32) regs->vp.r.ccm, par->vid_regs + 0xA8);
-+ writel((u32) regs->vp.r.cc1, par->vid_regs + 0xB0);
-+ writel((u32) regs->vp.r.cc2, par->vid_regs + 0xB8);
-+ writel((u32) regs->vp.r.a1x, par->vid_regs + 0xC0);
-+ writel((u32) regs->vp.r.a1y, par->vid_regs + 0xC8);
-+ writel((u32) regs->vp.r.a1c, par->vid_regs + 0xD0);
-+ writel((u32) regs->vp.r.a1t, par->vid_regs + 0xD8);
-+ writel((u32) regs->vp.r.a2x, par->vid_regs + 0xE0);
-+ writel((u32) regs->vp.r.a2y, par->vid_regs + 0xE8);
-+ writel((u32) regs->vp.r.a2c, par->vid_regs + 0xF0);
-+ writel((u32) regs->vp.r.a2t, par->vid_regs + 0xF8);
-+ writel((u32) regs->vp.r.a3x, par->vid_regs + 0x100);
-+ writel((u32) regs->vp.r.a3y, par->vid_regs + 0x108);
-+ writel((u32) regs->vp.r.a3c, par->vid_regs + 0x110);
-+ writel((u32) regs->vp.r.a3t, par->vid_regs + 0x118);
-+ writel((u32) regs->vp.r.vrr, par->vid_regs + 0x120);
-+
-+
-+ /* FP registers */
-+
-+ writel((u32) regs->fp.r.pt1, par->vid_regs + 0x400);
-+ writel((u32) regs->fp.r.pt2, par->vid_regs + 0x408);
-+
-+ writel((u32) regs->fp.r.dfc, par->vid_regs + 0x418);
-+ writel(regs->fp.r.blfsr, par->vid_regs + 0x420);
-+ writel(regs->fp.r.rlfsr, par->vid_regs + 0x428);
-+ writel(regs->fp.r.fmi, par->vid_regs + 0x430);
-+ writel(regs->fp.r.fmd, par->vid_regs + 0x438);
-+ writel(regs->fp.r.dca, par->vid_regs + 0x448);
-+ writel(regs->fp.r.dmd, par->vid_regs + 0x450);
-+ writel(regs->fp.r.crc, par->vid_regs + 0x458);
-+ writel(regs->fp.r.fbb, par->vid_regs + 0x460);
-+
-+ /* Final enables */
-+
-+ val = readl(par->vid_regs + 0x410);
-+
-+ /* Control the panel */
-+ if (regs->fp.r.pm & (1 << 24)) {
-+
-+ if (!(val & 0x09))
-+ writel(regs->fp.r.pm, par->vid_regs + 0x410);
-+ }
-+ else {
-+ if (!(val & 0x05))
-+ writel(regs->fp.r.pm, par->vid_regs + 0x410);
-+ }
-+
-+ /* Turn everything on */
-+
-+ writel(regs->dc.r.gcfg, par->dc_regs + 0x04);
-+ writel((u32) regs->vp.r.vcfg, par->vid_regs + 0x00);
-+ writel((u32) regs->vp.r.dcfg, par->vid_regs + 0x08);
-+ writel(regs->dc.r.dcfg, par->dc_regs + 0x08);
-+}
-+
-+
-+#ifdef DEBUG
-+
-+void dump_regs(struct fb_info *info, int mode) {
-+
-+ struct geodefb_par *par = info->par;
-+ u32 val;
-+ int i;
-+
-+ if (mode == 0) {
-+ for(i = 0; i < GP_REG_SIZE; i += 4) {
-+ val = readl(par->gp_regs + i);
-+ }
-+ }
-+
-+ if (mode == 1) {
-+ writel(0x4758, par->dc_regs + 0x00);
-+
-+ for(i = 0; i < DC_REG_SIZE; i += 4) {
-+ val = readl(par->dc_regs + i);
-+ printk("DC%x: %x\n", i, val);
-+ }
-+ }
-+
-+ if (mode == 2) {
-+ for(i = 0; i < VP_REG_SIZE; i += 8) {
-+ val = readl(par->vid_regs + i);
-+ printk("VP%x: %x\n", i, val);
-+ }
-+ }
-+
-+ if (mode == 3) {
-+ for(i = 0; i < FP_REG_SIZE; i += 8) {
-+ val = readl(par->vid_regs + 0x400 + i);
-+ printk("FP%x: %x\n", i, val);
-+ }
-+ }
-+}
-+
-+#endif
diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c
index 7f3f18d..e282e74 100644
--- a/drivers/video/geode/video_gx.c
@@ -14818,917 +4352,6 @@ index 3741ad7..49f6db5 100644
if (!default_bpp)
default_bpp = 8;
-diff --git a/drivers/video/olpc_dcon.c b/drivers/video/olpc_dcon.c
-new file mode 100644
-index 0000000..d4ef138
---- /dev/null
-+++ b/drivers/video/olpc_dcon.c
-@@ -0,0 +1,824 @@
-+/*
-+ * Mainly by David Woodhouse, somewhat modified by Jordan Crouse
-+ *
-+ * Copyright © 2006-2007 Red Hat, Inc.
-+ * Copyright © 2006-2007 Advanced Micro Devices, Inc.
-+ *
-+ * This program is free software. You can redistribute it and/or
-+ * modify it under the terms of version 2 of the GNU General Public
-+ * License as published by the Free Software Foundation.
-+ */
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/fb.h>
-+#include <linux/i2c.h>
-+#include <linux/platform_device.h>
-+#include <linux/i2c-id.h>
-+#include <linux/pci.h>
-+#include <linux/vt_kern.h>
-+#include <linux/pci_ids.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/backlight.h>
-+#include <linux/device.h>
-+#include <asm/uaccess.h>
-+#include <linux/ctype.h>
-+#include <linux/reboot.h>
-+#include <asm/tsc.h>
-+#include <asm/olpc.h>
-+
-+#include "olpc_dcon.h"
-+
-+/* Module definitions */
-+
-+static int resumeline = 898;
-+module_param(resumeline, int, 0444);
-+
-+static int noinit;
-+module_param(noinit, int, 0444);
-+
-+/* Default off since it doesn't work on DCON ASIC in B-test OLPC board */
-+static int useaa = 1;
-+module_param(useaa, int, 0444);
-+
-+/* I2C structures */
-+
-+static struct i2c_driver dcon_driver;
-+static struct i2c_client *dcon_client;
-+
-+/* Platform devices */
-+static struct platform_device *dcon_device;
-+
-+/* Backlight device */
-+static struct backlight_device *dcon_bl_dev;
-+
-+/* Base address of the GPIO registers */
-+static unsigned long gpio_base;
-+
-+static struct fb_info *fbinfo;
-+
-+/* Current source, initialized at probe time */
-+static int dcon_source;
-+
-+/* Desired source */
-+static int dcon_pending;
-+
-+/* Current output type */
-+static int dcon_output = DCON_OUTPUT_COLOR;
-+
-+/* Current sleep status (not yet implemented) */
-+static int dcon_sleep_val = DCON_ACTIVE;
-+
-+/* Shadow register for the DCON_REG_MODE register */
-+static unsigned short dcon_disp_mode;
-+
-+/* Variables used during switches */
-+static int dcon_switched;
-+
-+static DECLARE_WAIT_QUEUE_HEAD(dcon_wait_queue);
-+
-+static unsigned short normal_i2c[] = { 0x0D, I2C_CLIENT_END };
-+I2C_CLIENT_INSMOD;
-+
-+#define dcon_write(reg,val) i2c_smbus_write_word_data(dcon_client,reg,val)
-+#define dcon_read(reg) i2c_smbus_read_word_data(dcon_client,reg)
-+
-+/* The current backlight value - this saves us some smbus traffic */
-+static int bl_val = -1;
-+
-+/* ===== API functions - these are called by a variety of users ==== */
-+
-+/* Backlight notes - turning off the backlight enable bit in the DCON
-+ * doesn't save us any power over just pushing the BL to zero, so we
-+ * don't use that bit in this code.
-+ */
-+
-+static int dcon_get_backlight(void)
-+{
-+ if (dcon_client == NULL)
-+ return 0;
-+
-+ if (bl_val == -1)
-+ bl_val = dcon_read(DCON_REG_BRIGHT) & 0x0F;
-+
-+ return bl_val;
-+}
-+
-+static void dcon_set_backlight(int level)
-+{
-+ if (dcon_client == NULL)
-+ return;
-+
-+ if (bl_val == (level & 0x0F))
-+ return;
-+
-+ bl_val = level & 0x0F;
-+ dcon_write(DCON_REG_BRIGHT, bl_val);
-+
-+ /* Purposely turn off the backlight when we go to level 0 */
-+
-+ if (bl_val == 0) {
-+ dcon_disp_mode &= ~MODE_BL_ENABLE;
-+ dcon_write(DCON_REG_MODE, dcon_disp_mode);
-+ }
-+ else if (!(dcon_disp_mode & MODE_BL_ENABLE)) {
-+ dcon_disp_mode |= MODE_BL_ENABLE;
-+ dcon_write(DCON_REG_MODE, dcon_disp_mode);
-+ }
-+}
-+
-+/* Set the output type to either color or mono */
-+
-+static int dcon_set_output(int arg)
-+{
-+ if (dcon_output == arg)
-+ return 0;
-+
-+ dcon_output = arg;
-+
-+ if (arg == DCON_OUTPUT_MONO) {
-+ dcon_disp_mode &= ~(MODE_CSWIZZLE | MODE_COL_AA);
-+ dcon_disp_mode |= MODE_MONO_LUMA;
-+ }
-+ else {
-+ dcon_disp_mode &= ~(MODE_MONO_LUMA);
-+ dcon_disp_mode |= MODE_CSWIZZLE;
-+ if (useaa)
-+ dcon_disp_mode |= MODE_COL_AA;
-+ }
-+
-+ dcon_write(DCON_REG_MODE, dcon_disp_mode);
-+ return 0;
-+}
-+
-+/* For now, this will be really stupid - we need to address how
-+ * DCONLOAD works in a sleep and account for it accordingly
-+ */
-+
-+static void dcon_sleep(int state)
-+{
-+ /* Turn off the backlight and put the DCON to sleep */
-+
-+ if (state == dcon_sleep_val)
-+ return;
-+
-+ if (state == DCON_SLEEP) {
-+ dcon_disp_mode &= ~MODE_BL_ENABLE;
-+ dcon_disp_mode |= MODE_SLEEP;
-+ }
-+ else {
-+ /* Only re-enable the backlight if the backlight value is set */
-+
-+ if (bl_val != 0)
-+ dcon_disp_mode |= MODE_BL_ENABLE;
-+
-+ dcon_disp_mode &= ~MODE_SLEEP;
-+ }
-+
-+ dcon_sleep_val = state;
-+ dcon_write(DCON_REG_MODE, dcon_disp_mode);
-+
-+ /* We should turn off some stuff in the framebuffer - but what? */
-+}
-+
-+/* Set the source of the display (CPU or DCON) */
-+
-+static void dcon_source_switch(struct work_struct *work)
-+{
-+ DECLARE_WAITQUEUE(wait, current);
-+ int source = dcon_pending;
-+
-+ if (dcon_source == source)
-+ return;
-+
-+ dcon_switched = 0;
-+
-+ switch (source) {
-+ case DCON_SOURCE_CPU:
-+
-+ /* Enable the scanline interrupt bit */
-+ if (dcon_write(DCON_REG_MODE, dcon_disp_mode | MODE_SCAN_INT))
-+ printk(KERN_ERR "olpc-dcon: couldn't enable scanline interrupt!\n");
-+ else {
-+ /* Wait up to one second for the scanline interrupt */
-+ wait_event_timeout(dcon_wait_queue, dcon_switched == 1, HZ);
-+ }
-+
-+ if (!dcon_switched)
-+ printk(KERN_ERR "olpc-dcon: Timeout entering CPU mode; expect a screen glitch.\n");
-+
-+ /*
-+ * Ideally we'd like to disable interrupts here so that the
-+ * fb_powerup and DCON turn on happen at a known time value;
-+ * however, we can't do that right now with fb_set_suspend
-+ * messing with semaphores.
-+ *
-+ * For now, we just hope..
-+ */
-+ if (fb_powerup(fbinfo)) {
-+ printk(KERN_ERR "olpc-dcon: Failed to enter CPU mode\n");
-+ dcon_pending = DCON_SOURCE_DCON;
-+ return;
-+ }
-+
-+ /* And turn off the DCON */
-+ outl(1<<11, gpio_base + GPIOx_OUT_VAL);
-+
-+ /* Turn off the scanline interrupt */
-+ if (dcon_write(DCON_REG_MODE, dcon_disp_mode))
-+ printk(KERN_ERR "olpc-dcon: couldn't disable scanline interrupt!\n");
-+
-+ printk(KERN_INFO "olpc-dcon: The CPU has control\n");
-+ break;
-+ case DCON_SOURCE_DCON:
-+ {
-+ int t;
-+
-+ add_wait_queue(&dcon_wait_queue, &wait);
-+ set_current_state(TASK_UNINTERRUPTIBLE);
-+
-+ /* Clear GPIO11 (DCONLOAD) - this implies that the DCON is in
-+ control */
-+
-+ outl(1 << (11 + 16), gpio_base + GPIOx_OUT_VAL);
-+
-+ t = schedule_timeout(HZ/2);
-+ remove_wait_queue(&dcon_wait_queue, &wait);
-+ set_current_state(TASK_RUNNING);
-+
-+ if (!dcon_switched)
-+ printk(KERN_ERR "olpc-dcon: Timeout entering DCON mode; expect a screen glitch.\n");
-+
-+ /* Turn off the graphics engine completely */
-+ fb_powerdown(fbinfo);
-+
-+ printk(KERN_INFO "olpc-dcon: The DCON has control\n");
-+ break;
-+ }
-+ default:
-+ BUG();
-+ }
-+
-+ dcon_source = source;
-+}
-+
-+static DECLARE_WORK(dcon_work, dcon_source_switch);
-+
-+static int dcon_set_source(int arg)
-+{
-+ if (arg != DCON_SOURCE_CPU && arg != DCON_SOURCE_DCON)
-+ return -EINVAL;
-+
-+ if (dcon_pending == arg)
-+ return 0;
-+
-+ dcon_pending = arg;
-+ if ((dcon_source != arg) && !work_pending(&dcon_work))
-+ schedule_work(&dcon_work);
-+
-+ return 0;
-+}
-+
-+static int dcon_set_source_sync(int arg)
-+{
-+ int ret = dcon_set_source(arg);
-+ if (!ret)
-+ flush_scheduled_work();
-+ return ret;
-+}
-+
-+static int dconbl_set(struct backlight_device *dev) {
-+
-+ int level = dev->props.brightness;
-+
-+ if (dev->props.power != FB_BLANK_UNBLANK)
-+ level = 0;
-+
-+ dcon_set_backlight(level);
-+ return 0;
-+}
-+
-+static int dconbl_get(struct backlight_device *dev) {
-+ return dcon_get_backlight();
-+}
-+
-+static ssize_t dcon_mode_show(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ return sprintf(buf, "%4.4X\n", dcon_disp_mode);
-+}
-+
-+static ssize_t dcon_sleep_show(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ return sprintf(buf, "%d\n", dcon_sleep_val);
-+}
-+
-+static ssize_t /* __deprecated */ dcon_source_show(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n");
-+ return sprintf(buf, "%d\n", dcon_source);
-+}
-+
-+static ssize_t dcon_freeze_show(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ return sprintf(buf, "%d\n", dcon_source == DCON_SOURCE_DCON ? 1 : 0);
-+}
-+
-+static ssize_t dcon_output_show(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ return sprintf(buf, "%d\n", dcon_output);
-+}
-+
-+static ssize_t dcon_resumeline_show(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ return sprintf(buf, "%d\n", resumeline);
-+}
-+
-+static int _strtoul(const char *buf, int len, unsigned int *val)
-+{
-+
-+ char *endp;
-+ unsigned int output = simple_strtoul(buf, &endp, 0);
-+ int size = endp - buf;
-+
-+ if (*endp && isspace(*endp))
-+ size++;
-+
-+ if (size != len)
-+ return -EINVAL;
-+
-+ *val = output;
-+ return 0;
-+}
-+
-+static ssize_t dcon_output_store(struct device *dev,
-+ struct device_attribute *attr, const char *buf, size_t count)
-+{
-+ int output;
-+ int rc = -EINVAL;
-+
-+ if (_strtoul(buf, count, &output))
-+ return -EINVAL;
-+
-+ if (output == DCON_OUTPUT_COLOR || output == DCON_OUTPUT_MONO) {
-+ dcon_set_output(output);
-+ rc = count;
-+ }
-+
-+ return rc;
-+}
-+
-+static ssize_t /* __deprecated */ dcon_source_store(struct device *dev,
-+ struct device_attribute *attr, const char *buf, size_t count)
-+{
-+ int output;
-+ int rc = -EINVAL;
-+
-+ printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n");
-+ if (_strtoul(buf, count, &output))
-+ return -EINVAL;
-+
-+ dcon_set_source(output);
-+ rc = count;
-+
-+ return rc;
-+}
-+
-+static ssize_t dcon_freeze_store(struct device *dev,
-+ struct device_attribute *attr, const char *buf, size_t count)
-+{
-+ int output;
-+ int rc = -EINVAL;
-+
-+ if (_strtoul(buf, count, &output))
-+ return rc;
-+
-+ dcon_set_source(output ? DCON_SOURCE_DCON : DCON_SOURCE_CPU);
-+ rc = count;
-+
-+ return rc;
-+}
-+
-+static ssize_t dcon_resumeline_store(struct device *dev,
-+ struct device_attribute *attr, const char *buf, size_t count)
-+{
-+ int rl;
-+ int rc = -EINVAL;
-+
-+ if (_strtoul(buf, count, &rl))
-+ return rc;
-+
-+ resumeline = rl;
-+ dcon_write(DCON_REG_SCAN_INT, resumeline);
-+ rc = count;
-+
-+ return rc;
-+}
-+
-+static ssize_t dcon_sleep_store(struct device *dev,
-+ struct device_attribute *attr, const char *buf, size_t count)
-+{
-+ int output;
-+
-+ if (_strtoul(buf, count, &output))
-+ return -EINVAL;
-+
-+ dcon_sleep(output ? DCON_SLEEP : DCON_ACTIVE);
-+ return count;
-+}
-+
-+static struct device_attribute dcon_device_files[] = {
-+ __ATTR(mode, 0444, dcon_mode_show, NULL),
-+ __ATTR(sleep, 0644, dcon_sleep_show, dcon_sleep_store),
-+ __ATTR(source, 0644, dcon_source_show, dcon_source_store),
-+ __ATTR(freeze, 0644, dcon_freeze_show, dcon_freeze_store),
-+ __ATTR(output, 0644, dcon_output_show, dcon_output_store),
-+ __ATTR(resumeline, 0644, dcon_resumeline_show, dcon_resumeline_store),
-+};
-+
-+static struct backlight_ops dcon_bl_ops = {
-+ .get_brightness = dconbl_get,
-+ .update_status = dconbl_set
-+};
-+
-+/* List of GPIOs that we care about:
-+ (in) GPIO12 -- DCONBLNK
-+ (in) GPIO[56] -- DCONSTAT[01]
-+ (out) GPIO11 -- DCONLOAD
-+*/
-+
-+#define IN_GPIOS ((1<<5) | (1<<6) | (1<<7) | (1<<12))
-+#define OUT_GPIOS (1<<11)
-+
-+static irqreturn_t dcon_interrupt(int, void *);
-+
-+static int dcon_request_irq(void)
-+{
-+ unsigned long lo, hi;
-+ unsigned char lob;
-+
-+ rdmsr(MSR_LBAR_GPIO, lo, hi);
-+
-+ /* Check the mask and whether GPIO is enabled (sanity check) */
-+ if (hi != 0x0000f001) {
-+ printk(KERN_ERR "GPIO not enabled -- cannot use DCON\n");
-+ return -ENODEV;
-+ }
-+
-+ /* Mask off the IO base address */
-+ gpio_base = lo & 0x0000ff00;
-+
-+ /* Turn off the event enable for GPIO7 just to be safe */
-+ outl(1 << (16+7), gpio_base + GPIOx_EVNT_EN);
-+
-+ /* Set the directions for the GPIO pins */
-+ outl(OUT_GPIOS | (IN_GPIOS << 16), gpio_base + GPIOx_OUT_EN);
-+ outl(IN_GPIOS | (OUT_GPIOS << 16), gpio_base + GPIOx_IN_EN);
-+
-+ /* Set up the interrupt mappings */
-+
-+ /* Set the IRQ to pair 2 */
-+ geode_gpio_event_irq(OLPC_GPIO_DCON_IRQ, 2);
-+
-+ /* Enable group 2 to trigger the DCON interrupt */
-+ geode_gpio_set_irq(2, DCON_IRQ);
-+
-+ /* Select edge level for interrupt (in PIC) */
-+
-+ lob = inb(0x4d0);
-+ lob &= ~(1 << DCON_IRQ);
-+ outb(lob, 0x4d0);
-+
-+ /* Register the interupt handler */
-+ if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", &dcon_driver))
-+ return -EIO;
-+
-+ /* Clear INV_EN for GPIO7 (DCONIRQ) */
-+ outl((1<<(16+7)), gpio_base + GPIOx_INV_EN);
-+
-+ /* Enable filter for GPIO12 (DCONBLANK) */
-+ outl(1<<(12), gpio_base + GPIOx_IN_FLTR_EN);
-+
-+ /* Disable filter for GPIO7 */
-+ outl(1<<(16+7), gpio_base + GPIOx_IN_FLTR_EN);
-+
-+ /* Disable event counter for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */
-+
-+ outl(1<<(16+7), gpio_base + GPIOx_EVNTCNT_EN);
-+ outl(1<<(16+12), gpio_base + GPIOx_EVNTCNT_EN);
-+
-+ /* Add GPIO12 to the Filter Event Pair #7 */
-+ outb(12, gpio_base + GPIO_FE7_SEL);
-+
-+ /* Turn off negative Edge Enable for GPIO12 */
-+ outl(1<<(16+12), gpio_base + GPIOx_NEGEDGE_EN);
-+
-+ /* Enable negative Edge Enable for GPIO7 */
-+ outl(1<<7, gpio_base + GPIOx_NEGEDGE_EN);
-+
-+ /* Zero the filter amount for Filter Event Pair #7 */
-+ outw(0, gpio_base + GPIO_FLT7_AMNT);
-+
-+ /* Clear the negative edge status for GPIO7 and GPIO12 */
-+ outl((1<<7) | (1<<12), gpio_base+0x4c);
-+
-+ /* FIXME: Clear the posiitive status as well, just to be sure */
-+ outl((1<<7) | (1<<12), gpio_base+0x48);
-+
-+ /* Enable events for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */
-+ outl((1<<(7))|(1<<12), gpio_base + GPIOx_EVNT_EN);
-+
-+ /* Determine the current state by reading the GPIO bit */
-+ /* Earlier stages of the boot process have established the state */
-+ dcon_source = inl(gpio_base + GPIOx_OUT_VAL) & (1<<11)
-+ ? DCON_SOURCE_CPU
-+ : DCON_SOURCE_DCON;
-+ dcon_pending = dcon_source;
-+
-+ return 0;
-+}
-+
-+static int dcon_reboot_notify(struct notifier_block *nb, unsigned long foo, void *bar)
-+{
-+ if (dcon_client == NULL)
-+ return 0;
-+
-+ /* Turn off the DCON. Entirely. */
-+ dcon_write(DCON_REG_MODE, 0x39);
-+ dcon_write(DCON_REG_MODE, 0x32);
-+ return 0;
-+}
-+
-+static int dcon_conswitch_notify(struct notifier_block *nb,
-+ unsigned long mode, void *dummy)
-+{
-+ if (mode == CONSOLE_EVENT_SWITCH_TEXT)
-+ dcon_sleep(DCON_ACTIVE);
-+
-+ return 0;
-+}
-+
-+static struct notifier_block dcon_nb = {
-+ .notifier_call = dcon_reboot_notify,
-+ .priority = -1,
-+};
-+
-+static struct notifier_block dcon_console_nb = {
-+ .notifier_call = dcon_conswitch_notify,
-+ .priority = -1,
-+};
-+
-+static int dcon_probe(struct i2c_adapter *adap, int addr, int kind)
-+{
-+ struct i2c_client *client;
-+ uint16_t ver;
-+ int rc, i;
-+
-+ if (!olpc_has_dcon()) {
-+ printk("olpc-dcon: No DCON is attached.\n");
-+ return -ENODEV;
-+ }
-+
-+ if (num_registered_fb >= 1)
-+ fbinfo = registered_fb[0];
-+
-+ if (adap->id != I2C_HW_SMBUS_SCX200) {
-+ printk(KERN_ERR "olpc-dcon: Invalid I2C bus (%d not %d)\n",
-+ adap->id, I2C_HW_SMBUS_SCX200);
-+ return -ENXIO;
-+ }
-+
-+ client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-+ if (client == NULL)
-+ return -ENOMEM;
-+
-+ strncpy(client->name, "OLPC-DCON", I2C_NAME_SIZE);
-+ client->addr = addr;
-+ client->adapter = adap;
-+ client->driver = &dcon_driver;
-+
-+ if ((rc = i2c_attach_client(client)) != 0) {
-+ printk(KERN_ERR "olpc-dcon: Unable to attach the I2C client.\n");
-+ goto eclient;
-+ }
-+
-+ ver = i2c_smbus_read_word_data(client, DCON_REG_ID);
-+
-+ if ((ver >> 8) != 0xDC) {
-+ printk(KERN_ERR "olpc-dcon: DCON ID not 0xDCxx: 0x%04x instead.\n", ver);
-+ rc = -ENXIO;
-+ goto ei2c;
-+ }
-+
-+ if ((rc = dcon_request_irq())) {
-+ printk(KERN_ERR "olpc-dcon: Unable to grab IRQ.\n");
-+ goto ei2c;
-+ }
-+
-+ if (ver < 0xdc02 && !noinit) {
-+ /* Initialize the DCON registers */
-+
-+ /* Start with work-arounds for DCON ASIC */
-+ i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
-+ i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
-+ i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
-+ i2c_smbus_write_word_data(client, 0x0b, 0x007a);
-+ i2c_smbus_write_word_data(client, 0x36, 0x025c);
-+ i2c_smbus_write_word_data(client, 0x37, 0x025e);
-+
-+ /* Initialise SDRAM */
-+
-+ i2c_smbus_write_word_data(client, 0x3b, 0x002b);
-+ i2c_smbus_write_word_data(client, 0x41, 0x0101);
-+ i2c_smbus_write_word_data(client, 0x42, 0x0101);
-+ }
-+
-+ /* Colour swizzle, AA, no passthrough, backlight */
-+
-+ dcon_disp_mode = MODE_PASSTHRU | MODE_BL_ENABLE | MODE_CSWIZZLE;
-+ if (useaa)
-+ dcon_disp_mode |= MODE_COL_AA;
-+ i2c_smbus_write_word_data(client, DCON_REG_MODE, dcon_disp_mode);
-+
-+
-+ /* Set the scanline to interrupt on during resume */
-+
-+ i2c_smbus_write_word_data(client, DCON_REG_SCAN_INT, resumeline);
-+
-+ /* Add the DCON device */
-+
-+ dcon_device = platform_device_alloc("dcon", -1);
-+
-+ if (dcon_device == NULL) {
-+ printk(KERN_ERR "dcon: Unable to create the DCON device\n");
-+ rc = -ENOMEM;
-+ goto eirq;
-+ }
-+
-+ if ((rc = platform_device_add(dcon_device))) {
-+ printk(KERN_ERR "dcon: Unable to add the DCON device\n");
-+ goto edev;
-+ }
-+
-+ for(i = 0; i < ARRAY_SIZE(dcon_device_files); i++)
-+ device_create_file(&dcon_device->dev, &dcon_device_files[i]);
-+
-+ /* Add the backlight device for the DCON */
-+
-+ dcon_client = client;
-+
-+ dcon_bl_dev = backlight_device_register("dcon-bl", &dcon_device->dev,
-+ NULL, &dcon_bl_ops);
-+
-+ if (IS_ERR(dcon_bl_dev)) {
-+ printk(KERN_INFO "Could not register the backlight device for the DCON (%ld)\n", PTR_ERR(dcon_bl_dev));
-+ dcon_bl_dev = NULL;
-+ }
-+ else {
-+ dcon_bl_dev->props.max_brightness = 15;
-+ dcon_bl_dev->props.power = FB_BLANK_UNBLANK;
-+ dcon_bl_dev->props.brightness = dcon_get_backlight();
-+
-+ backlight_update_status(dcon_bl_dev);
-+ }
-+
-+ register_reboot_notifier(&dcon_nb);
-+ console_event_register(&dcon_console_nb);
-+
-+ printk(KERN_INFO "olpc-dcon: Discovered DCON version %x\n", ver & 0xFF);
-+
-+ return 0;
-+
-+ edev:
-+ platform_device_unregister(dcon_device);
-+ dcon_device = NULL;
-+ eirq:
-+ free_irq(DCON_IRQ, &dcon_driver);
-+ ei2c:
-+ i2c_detach_client(client);
-+ eclient:
-+ kfree(client);
-+
-+ return rc;
-+}
-+
-+static int dcon_attach(struct i2c_adapter *adap)
-+{
-+ int ret;
-+
-+ ret = i2c_probe(adap, &addr_data, dcon_probe);
-+
-+ if (dcon_client == NULL)
-+ printk(KERN_ERR "olpc-dcon: No DCON found on SMBus\n");
-+
-+ return ret;
-+}
-+
-+static int dcon_detach(struct i2c_client *client)
-+{
-+ int rc;
-+ dcon_client = NULL;
-+
-+ unregister_reboot_notifier(&dcon_nb);
-+ console_event_unregister(&dcon_console_nb);
-+
-+ free_irq(DCON_IRQ, &dcon_driver);
-+
-+ if ((rc = i2c_detach_client(client)) == 0)
-+ kfree(i2c_get_clientdata(client));
-+
-+ if (dcon_bl_dev != NULL)
-+ backlight_device_unregister(dcon_bl_dev);
-+
-+ if (dcon_device != NULL)
-+ platform_device_unregister(dcon_device);
-+ cancel_work_sync(&dcon_work);
-+
-+ return rc;
-+}
-+
-+
-+#ifdef CONFIG_PM
-+static int dcon_suspend(struct i2c_client *client, pm_message_t state)
-+{
-+ if (dcon_sleep_val != DCON_ACTIVE)
-+ return 0;
-+
-+ /* Set up the DCON to have the source */
-+ return dcon_set_source_sync(DCON_SOURCE_DCON);
-+}
-+
-+static int dcon_resume(struct i2c_client *client)
-+{
-+ int x;
-+ if (dcon_sleep_val != DCON_ACTIVE)
-+ return 0;
-+
-+ /* HACK: ensure the bus is stable */
-+ do {
-+ x = dcon_read(DCON_REG_ID);
-+ } while (x < 0);
-+
-+ return dcon_set_source(DCON_SOURCE_CPU);
-+}
-+
-+#endif
-+
-+static irqreturn_t dcon_interrupt(int irq, void *id)
-+{
-+ int status = inl(gpio_base + GPIOx_READ_BACK) >> 5;
-+
-+ /* Clear the negative edge status for GPIO7 */
-+ outl(1 << 7, gpio_base + GPIOx_NEGEDGE_STS);
-+
-+ switch (status & 3) {
-+ case 3:
-+ printk(KERN_DEBUG "olpc-dcon: DCONLOAD_MISSED interrupt\n");
-+ break;
-+ case 2: /* switch to DCON mode */
-+ case 1: /* switch to CPU mode */
-+ dcon_switched = 1;
-+ wake_up(&dcon_wait_queue);
-+ break;
-+ case 0:
-+ printk(KERN_DEBUG "olpc-dcon: scanline interrupt w/CPU\n");
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct i2c_driver dcon_driver = {
-+ .driver = {
-+ .name = "OLPC-DCON",
-+ },
-+ .id = I2C_DRIVERID_DCON,
-+ .attach_adapter = dcon_attach,
-+ .detach_client = dcon_detach,
-+#ifdef CONFIG_PM
-+ .suspend = dcon_suspend,
-+ .resume = dcon_resume,
-+#endif
-+};
-+
-+
-+static int __init olpc_dcon_init(void)
-+{
-+ i2c_add_driver(&dcon_driver);
-+ return 0;
-+}
-+
-+static void __exit olpc_dcon_exit(void)
-+{
-+ i2c_del_driver(&dcon_driver);
-+}
-+
-+module_init(olpc_dcon_init);
-+module_exit(olpc_dcon_exit);
-+
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/video/olpc_dcon.h b/drivers/video/olpc_dcon.h
-new file mode 100644
-index 0000000..6453ca4
---- /dev/null
-+++ b/drivers/video/olpc_dcon.h
-@@ -0,0 +1,75 @@
-+#ifndef OLPC_DCON_H_
-+#define OLPC_DCON_H_
-+
-+/* DCON registers */
-+
-+#define DCON_REG_ID 0
-+#define DCON_REG_MODE 1
-+
-+#define MODE_PASSTHRU (1<<0)
-+#define MODE_SLEEP (1<<1)
-+#define MODE_SLEEP_AUTO (1<<2)
-+#define MODE_BL_ENABLE (1<<3)
-+#define MODE_BLANK (1<<4)
-+#define MODE_CSWIZZLE (1<<5)
-+#define MODE_COL_AA (1<<6)
-+#define MODE_MONO_LUMA (1<<7)
-+#define MODE_SCAN_INT (1<<8)
-+#define MODE_CLOCKDIV (1<<9)
-+#define MODE_DEBUG (1<<14)
-+#define MODE_SELFTEST (1<<15)
-+
-+#define DCON_REG_HRES 2
-+#define DCON_REG_HTOTAL 3
-+#define DCON_REG_HSYNC_WIDTH 4
-+#define DCON_REG_VRES 5
-+#define DCON_REG_VTOTAL 6
-+#define DCON_REG_VSYNC_WIDTH 7
-+#define DCON_REG_TIMEOUT 8
-+#define DCON_REG_SCAN_INT 9
-+#define DCON_REG_BRIGHT 10
-+
-+/* GPIO registers (CS5536) */
-+
-+#define MSR_LBAR_GPIO 0x5140000C
-+
-+#define GPIOx_OUT_VAL 0x00
-+#define GPIOx_OUT_EN 0x04
-+#define GPIOx_IN_EN 0x20
-+#define GPIOx_INV_EN 0x24
-+#define GPIOx_IN_FLTR_EN 0x28
-+#define GPIOx_EVNTCNT_EN 0x2C
-+#define GPIOx_READ_BACK 0x30
-+#define GPIOx_EVNT_EN 0x38
-+#define GPIOx_NEGEDGE_EN 0x44
-+#define GPIOx_NEGEDGE_STS 0x4C
-+#define GPIO_FLT7_AMNT 0xD8
-+#define GPIO_MAP_X 0xE0
-+#define GPIO_MAP_Y 0xE4
-+#define GPIO_FE7_SEL 0xF7
-+
-+
-+/* Status values */
-+
-+#define DCONSTAT_SCANINT 0
-+#define DCONSTAT_SCANINT_DCON 1
-+#define DCONSTAT_DISPLAYLOAD 2
-+#define DCONSTAT_MISSED 3
-+
-+/* Source values */
-+
-+#define DCON_SOURCE_DCON 0
-+#define DCON_SOURCE_CPU 1
-+
-+/* Output values */
-+#define DCON_OUTPUT_COLOR 0
-+#define DCON_OUTPUT_MONO 1
-+
-+/* Sleep values */
-+#define DCON_ACTIVE 0
-+#define DCON_SLEEP 1
-+
-+/* Interrupt */
-+#define DCON_IRQ 6
-+
-+#endif
diff --git a/fs/Kconfig b/fs/Kconfig
index f9eed6d..6fa3ea2 100644
--- a/fs/Kconfig
@@ -17046,314 +5669,6 @@ index 40942bc..8bbeab9 100644
{
if (!strcmp(name, ""))
return -EINVAL;
-diff --git a/fs/promfs/Makefile b/fs/promfs/Makefile
-new file mode 100644
-index 0000000..940a51b
---- /dev/null
-+++ b/fs/promfs/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_PROMFS_FS) += promfs.o
-diff --git a/fs/promfs/promfs.c b/fs/promfs/promfs.c
-new file mode 100644
-index 0000000..9fb2bfa
---- /dev/null
-+++ b/fs/promfs/promfs.c
-@@ -0,0 +1,295 @@
-+/*
-+ * promfs.c - generic inode/dentry functions for IEEE 1275-based filesystems.
-+ *
-+ * This is based heavily upon prior ieee1275 and other virtual filesystems
-+ * implementations; openpromfs, proc_devtree.c, oprofilefs, procfs, ...
-+ *
-+ * Copyright (C) 2007 Andres Salomon <dilinger@debian.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/pagemap.h>
-+#include <linux/fs.h>
-+//#include <linux/promfs.h>
-+#include <asm/prom.h>
-+
-+#define PROMFS_MAGIC 0x1f2f3fff
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Andres Salomon");
-+
-+struct promfs_inode
-+{
-+ struct inode ino;
-+ struct property *prop;
-+};
-+
-+static inline struct promfs_inode *to_promfs_inode(struct inode *inode)
-+{
-+ return container_of(inode, struct promfs_inode, ino);
-+}
-+
-+#if 0
-+static DEFINE_SPINLOCK(promfs_lock);
-+
-+static struct of_node *of_tree = NULL;
-+static DEFINE_RWLOCK(of_tree_lock);
-+
-+void __init of_build_tree(void)
-+{
-+
-+
-+}
-+#endif
-+
-+static int promfs_open_file(struct inode *inode, struct file *file)
-+{
-+ struct promfs_inode *ino;
-+
-+ ino = to_promfs_inode(inode);
-+ if (!ino->prop)
-+ return -EIO;
-+ file->private_data = ino->prop;
-+
-+ return 0;
-+}
-+
-+static ssize_t promfs_read_file(struct file *file, char __user *data,
-+ size_t len, loff_t *ppos)
-+{
-+ struct property *prop = (struct property *) file->private_data;
-+ return simple_read_from_buffer(data, len, ppos, prop->value,
-+ prop->length);
-+}
-+
-+static ssize_t promfs_write_file(struct file *file, char const __user *buf,
-+ size_t count, loff_t * offset)
-+{
-+ /* TODO.... 'cause, y'know, it would be nice. */
-+ return -EIO;
-+}
-+
-+static struct file_operations promfs_file_ops = {
-+ .open = promfs_open_file,
-+ .read = promfs_read_file,
-+ .write = promfs_write_file,
-+};
-+
-+static struct kmem_cache *promfs_inode_cachep;
-+
-+static struct inode *promfs_alloc_inode(struct super_block *sb)
-+{
-+ struct promfs_inode *pr_ino;
-+
-+ pr_ino = kmem_cache_alloc(promfs_inode_cachep, GFP_KERNEL);
-+ if (!pr_ino)
-+ return NULL;
-+ pr_ino->prop = NULL;
-+
-+ return &pr_ino->ino;
-+}
-+
-+static void promfs_destroy_inode(struct inode *inode)
-+{
-+ kmem_cache_free(promfs_inode_cachep, to_promfs_inode(inode));
-+}
-+
-+static void promfs_read_inode(struct inode *inode)
-+{
-+ inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
-+}
-+
-+static int promfs_remount(struct super_block *sb, int *flags, char *data)
-+{
-+ *flags |= MS_NOATIME;
-+ return 0;
-+}
-+
-+static struct super_operations promfs_s_ops = {
-+ .alloc_inode = promfs_alloc_inode,
-+ .destroy_inode = promfs_destroy_inode,
-+ .read_inode = promfs_read_inode,
-+ .statfs = simple_statfs,
-+ .drop_inode = generic_delete_inode,
-+ .remount_fs = promfs_remount,
-+};
-+
-+static struct inode *promfs_get_inode(struct super_block *sb, int mode)
-+{
-+ struct inode *inode = new_inode(sb);
-+
-+ if (inode) {
-+ inode->i_mode = mode;
-+ inode->i_uid = 0;
-+ inode->i_gid = 0;
-+ inode->i_blocks = 0;
-+ inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
-+ }
-+
-+ return inode;
-+}
-+
-+static int promfs_create_file(struct super_block *sb, struct dentry *root,
-+ struct property *prop, const struct file_operations *fops)
-+{
-+ struct dentry *dentry;
-+ struct inode *inode;
-+ struct promfs_inode *ino;
-+
-+ dentry = d_alloc_name(root, prop->name);
-+ if (!dentry)
-+ goto err;
-+
-+ inode = promfs_get_inode(sb, S_IFREG | 0644);
-+ if (!inode)
-+ goto err_dput;
-+ inode->i_fop = fops;
-+ ino = to_promfs_inode(inode);
-+ ino->prop = prop;
-+ d_add(dentry, inode);
-+
-+ return 0;
-+
-+err_dput:
-+ dput(dentry);
-+err:
-+ return -EFAULT;
-+}
-+
-+struct dentry *promfs_create_dir(struct super_block *sb, struct dentry *root,
-+ char const *name)
-+{
-+ struct dentry *dentry;
-+ struct inode *inode;
-+
-+ dentry = d_alloc_name(root, name);
-+ if (!dentry)
-+ goto err;
-+
-+ inode = promfs_get_inode(sb, S_IFDIR | 0755);
-+ if (!inode)
-+ goto err_dput;
-+ inode->i_op = &simple_dir_inode_operations;
-+ inode->i_fop = &simple_dir_operations;
-+ d_add(dentry, inode);
-+ return dentry;
-+
-+err_dput:
-+ dput(dentry);
-+err:
-+ return NULL;
-+}
-+
-+void promfs_populate(struct super_block *sb, struct dentry *root,
-+ struct device_node *node)
-+{
-+ struct dentry *dentry;
-+ struct device_node *child;
-+ struct property *prop;
-+
-+ if (!node)
-+ return;
-+
-+ for (child = node->child; child; child = child->sibling) {
-+ dentry = promfs_create_dir(sb, root, child->path_component_name);
-+ promfs_populate(sb, dentry, child);
-+ }
-+ for (prop = node->properties; prop; prop = prop->next)
-+ promfs_create_file(sb, root, prop, &promfs_file_ops);
-+}
-+
-+static int promfs_fill_super(struct super_block *sb, void *data, int silent)
-+{
-+ struct inode *root_inode;
-+ struct dentry *root_dentry;
-+ struct promfs_inode *inode;
-+
-+ sb->s_blocksize = PAGE_CACHE_SIZE;
-+ sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
-+ sb->s_magic = PROMFS_MAGIC;
-+ sb->s_op = &promfs_s_ops;
-+ sb->s_time_gran = 1;
-+ sb->s_flags |= MS_NOATIME;
-+
-+ root_inode = promfs_get_inode(sb, S_IFDIR | 0755);
-+ if (!root_inode)
-+ goto err;
-+ root_inode->i_op = &simple_dir_inode_operations;
-+ root_inode->i_fop = &simple_dir_operations;
-+
-+ inode = to_promfs_inode(root_inode);
-+
-+ root_dentry = d_alloc_root(root_inode);
-+ if (!root_dentry)
-+ goto err_iput;
-+ sb->s_root = root_dentry;
-+
-+ promfs_populate(sb, root_dentry, of_find_node_by_path("/"));
-+ return 0;
-+
-+err_iput:
-+ iput(root_inode);
-+err:
-+ return -ENOMEM;
-+}
-+
-+static int promfs_get_sb(struct file_system_type *fs_type, int flags,
-+ const char *dev_name, void *data, struct vfsmount *mnt)
-+{
-+ return get_sb_single(fs_type, flags, data, promfs_fill_super, mnt);
-+}
-+
-+static struct file_system_type promfs_fs_type = {
-+ .owner = THIS_MODULE,
-+ .name = "promfs",
-+ .get_sb = promfs_get_sb,
-+ .kill_sb = kill_litter_super,
-+};
-+
-+static void init_once(void *i, struct kmem_cache *cachep, unsigned long fl)
-+{
-+ struct promfs_inode *inode = (struct promfs_inode *) i;
-+ inode_init_once(&inode->ino);
-+}
-+
-+static int __init init_promfs(void)
-+{
-+ int err;
-+
-+ prom_build_devicetree();
-+ promfs_inode_cachep = kmem_cache_create("promfs_inode_cache",
-+ sizeof(struct promfs_inode), 0,
-+ SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD, init_once, NULL);
-+ if (!promfs_inode_cachep)
-+ return -ENOMEM;
-+
-+ err = register_filesystem(&promfs_fs_type);
-+ if (err)
-+ kmem_cache_destroy(promfs_inode_cachep);
-+
-+ return err;
-+}
-+
-+static void __exit exit_promfs(void)
-+{
-+ unregister_filesystem(&promfs_fs_type);
-+ kmem_cache_destroy(promfs_inode_cachep);
-+}
-+
-+module_init(init_promfs);
-+module_exit(exit_promfs);
diff --git a/include/asm-i386/geode.h b/include/asm-i386/geode.h
index 6da4bbb..f18ebe2 100644
--- a/include/asm-i386/geode.h
@@ -17414,264 +5729,7 @@ index 6da4bbb..f18ebe2 100644
/* Specific geode tests */
static inline int is_geode_gx(void)
-diff --git a/include/asm-i386/ofw.h b/include/asm-i386/ofw.h
-new file mode 100644
-index 0000000..79b08b1
---- /dev/null
-+++ b/include/asm-i386/ofw.h
-@@ -0,0 +1,16 @@
-+/*
-+ * Definitions for Open Firmware client interface on 32-bit system.
-+ * OF Cell size is 4. Integer properties are encoded big endian,
-+ * as with all OF implementations.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+#ifndef _OFW_H
-+#define _OFW_H
-+
-+extern int ofw(char *, int, int, ...);
-+
-+#endif
-diff --git a/include/asm-i386/olpc.h b/include/asm-i386/olpc.h
-new file mode 100644
-index 0000000..26bc1a8
---- /dev/null
-+++ b/include/asm-i386/olpc.h
-@@ -0,0 +1,116 @@
-+/* OLPC machine specific definitions */
-+
-+#ifndef ASM_OLPC_H_
-+#define ASM_OLPC_H_
-+
-+#include <asm/geode.h>
-+
-+struct olpc_platform_t {
-+ int flags;
-+ int boardrev;
-+ int ecver;
-+};
-+
-+#define OLPC_F_PRESENT 0x01
-+#define OLPC_F_DCON 0x02
-+#define OLPC_F_VSA 0x04
-+
-+enum
-+{
-+ OLPC_REV_A = 0,
-+
-+ OLPC_REV_PRE_B1,
-+ OLPC_REV_B1,
-+ OLPC_REV_PRE_B2,
-+ OLPC_REV_B2,
-+ OLPC_REV_PRE_B3,
-+ OLPC_REV_B3,
-+ OLPC_REV_B4,
-+ OLPC_REV_C1,
-+ OLPC_REV_R1,
-+ OLPC_REV_UNKNOWN /* this should always come last */
-+};
-+
-+#ifndef CONFIG_OLPC
-+
-+static inline int machine_is_olpc(void) { return 0; }
-+static inline int olpc_has_dcon(void) { return 0; }
-+static inline int olpc_has_vsa(void) { return 0; }
-+static inline int olpc_get_rev(void) { return OLPC_REV_UNKNOWN; }
-+
-+#else
-+
-+extern struct olpc_platform_t olpc_platform_info;
-+
-+static inline int
-+machine_is_olpc(void)
-+{
-+ return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0;
-+}
-+
-+static inline int
-+olpc_has_dcon(void)
-+{
-+ return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0;
-+}
-+
-+static inline int
-+olpc_has_vsa(void)
-+{
-+ return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0;
-+}
-+
-+static inline int
-+olpc_get_rev(void)
-+{
-+ return olpc_platform_info.boardrev;
-+}
-+
-+static inline int
-+olpc_rev_after(int rev)
-+{
-+ return olpc_platform_info.boardrev > rev &&
-+ olpc_platform_info.boardrev != OLPC_REV_UNKNOWN;
-+}
-+
-+static inline int
-+olpc_rev_before(int rev)
-+{
-+ return olpc_platform_info.boardrev < rev ||
-+ olpc_platform_info.boardrev == OLPC_REV_UNKNOWN;
-+}
-+
-+#endif
-+
-+/* EC functions */
-+
-+int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
-+ unsigned char *outbuf, size_t outlen);
-+
-+void olpc_register_battery_callback(void (*f)(unsigned long));
-+void olpc_deregister_battery_callback(void);
-+
-+/* EC commands and responses */
-+
-+/* SCI source values */
-+
-+#define EC_SCI_SRC_EMPTY 0x00
-+#define EC_SCI_SRC_GAME 0x01
-+#define EC_SCI_SRC_BATTERY 0x02
-+#define EC_SCI_SRC_BATSOC 0x04
-+#define EC_SCI_SRC_BATERR 0x08
-+#define EC_SCI_SRC_EBOOK 0x10
-+#define EC_SCI_SRC_WLAN 0x20
-+#define EC_SCI_SRC_ACPWR 0x40
-+
-+/* GPIO assignments */
-+
-+#define OLPC_GPIO_MIC_AC 1
-+#define OLPC_GPIO_DCON_IRQ 7
-+#define OLPC_GPIO_THRM_ALRM 10
-+#define OLPC_GPIO_WORKAUX 24
-+#define OLPC_GPIO_LID 26
-+#define OLPC_GPIO_ECSCI 27
-+
-+#endif
-+
-diff --git a/include/asm-i386/prom.h b/include/asm-i386/prom.h
-new file mode 100644
-index 0000000..59d3bdd
---- /dev/null
-+++ b/include/asm-i386/prom.h
-@@ -0,0 +1,108 @@
-+#ifndef _I386_PROM_H
-+#define _I386_PROM_H
-+#ifdef __KERNEL__
-+
-+
-+/*
-+ * Definitions for talking to the Open Firmware PROM on
-+ * Power Macintosh computers.
-+ *
-+ * Copyright (C) 1996-2005 Paul Mackerras.
-+ *
-+ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
-+ * Updates for SPARC64 by David S. Miller
-+ * Updates for i386/OLPC by Andres Salomon
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/proc_fs.h>
-+#include <asm/atomic.h>
-+
-+typedef u32 phandle;
-+typedef u32 ihandle;
-+
-+struct property {
-+ char *name;
-+ int length;
-+ void *value;
-+ struct property *next;
-+};
-+
-+struct device_node {
-+ const char *name;
-+ const char *type;
-+ phandle node;
-+// phandle linux_phandle;
-+ char *path_component_name;
-+ char *full_name;
-+
-+ struct property *properties;
-+ struct property *deadprops; /* removed properties */
-+ struct device_node *parent;
-+ struct device_node *child;
-+ struct device_node *sibling;
-+ struct device_node *next; /* next device of same type */
-+ struct device_node *allnext; /* next in list of all nodes */
-+ struct proc_dir_entry *pde; /* this node's proc directory */
-+ struct kref kref;
-+ unsigned long _flags;
-+ void *data;
-+};
-+
-+/* flag descriptions */
-+#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */
-+
-+#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
-+#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
-+
-+#define OF_BAD_ADDR ((u64)-1)
-+
-+static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
-+{
-+ dn->pde = de;
-+}
-+
-+extern struct device_node *of_find_node_by_name(struct device_node *from,
-+ const char *name);
-+#define for_each_node_by_name(dn, name) \
-+ for (dn = of_find_node_by_name(NULL, name); dn; \
-+ dn = of_find_node_by_name(dn, name))
-+extern struct device_node *of_find_node_by_type(struct device_node *from,
-+ const char *type);
-+#define for_each_node_by_type(dn, type) \
-+ for (dn = of_find_node_by_type(NULL, type); dn; \
-+ dn = of_find_node_by_type(dn, type))
-+extern struct device_node *of_find_compatible_node(struct device_node *from,
-+ const char *type, const char *compat);
-+extern struct device_node *of_find_node_by_path(const char *path);
-+extern struct device_node *of_find_node_by_phandle(phandle handle);
-+extern struct device_node *of_get_parent(const struct device_node *node);
-+extern struct device_node *of_get_next_child(const struct device_node *node,
-+ struct device_node *prev);
-+extern struct property *of_find_property(const struct device_node *np,
-+ const char *name,
-+ int *lenp);
-+//extern struct device_node *of_node_get(struct device_node *node);
-+//extern void of_node_put(struct device_node *node);
-+extern int of_device_is_compatible(const struct device_node *device,
-+ const char *);
-+extern const void *of_get_property(const struct device_node *node,
-+ const char *name,
-+ int *lenp);
-+#define get_property(node,name,lenp) of_get_property(node,name,lenp)
-+extern int of_set_property(struct device_node *node, const char *name, void *val, int len);
-+extern int of_getintprop_default(struct device_node *np,
-+ const char *name,
-+ int def);
-+extern int of_n_addr_cells(struct device_node *np);
-+extern int of_n_size_cells(struct device_node *np);
-+
-+extern void prom_build_devicetree(void);
-+
-+#endif /* __KERNEL__ */
-+#endif
+
diff --git a/include/asm-i386/setup.h b/include/asm-i386/setup.h
index 7862fe8..d7146c0 100644
--- a/include/asm-i386/setup.h
@@ -17684,113 +5742,6 @@ index 7862fe8..d7146c0 100644
#ifndef __ASSEMBLY__
-diff --git a/include/linux/battery.h b/include/linux/battery.h
-new file mode 100644
-index 0000000..2f856a0
---- /dev/null
-+++ b/include/linux/battery.h
-@@ -0,0 +1,101 @@
-+/*
-+ * Driver model for batteries
-+ *
-+ * © 2006 David Woodhouse <dwmw2@infradead.org>
-+ *
-+ * Based on LED Class support, by John Lenz and Richard Purdie:
-+ *
-+ * © 2005 John Lenz <lenz@cs.wisc.edu>
-+ * © 2005-2006 Richard Purdie <rpurdie@openedhand.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#ifndef __LINUX_BATTERY_H__
-+#define __LINUX_BATTERY_H__
-+
-+struct device;
-+struct class_device;
-+
-+/*
-+ * Battery Core
-+ */
-+#define PWRDEV_TYPE_BATTERY 0
-+#define PWRDEV_TYPE_AC 1
-+
-+#define BAT_STAT_PRESENT (1<<0)
-+#define BAT_STAT_LOW (1<<1)
-+#define BAT_STAT_FULL (1<<2)
-+#define BAT_STAT_CHARGING (1<<3)
-+#define BAT_STAT_DISCHARGING (1<<4)
-+#define BAT_STAT_OVERTEMP (1<<5)
-+#define BAT_STAT_CRITICAL (1<<6)
-+#define BAT_STAT_FIRE (1<<7)
-+#define BAT_STAT_CHARGE_DONE (1<<8)
-+
-+/* Thou shalt not export any attributes in sysfs except these, and
-+ with these units: */
-+#define BAT_INFO_STATUS "status" /* Not free-form. Use
-+ provided function */
-+#define BAT_INFO_TEMP1 "temp1" /* °C/1000 */
-+#define BAT_INFO_TEMP1_NAME "temp1_name" /* string */
-+
-+#define BAT_INFO_TEMP2 "temp2" /* °C/1000 */
-+#define BAT_INFO_TEMP2_NAME "temp2_name" /* string */
-+
-+#define BAT_INFO_VOLTAGE "voltage" /* mV */
-+#define BAT_INFO_VOLTAGE_DESIGN "voltage_design" /* mV */
-+
-+#define BAT_INFO_CURRENT "current" /* mA */
-+#define BAT_INFO_CURRENT_NOW "current_now" /* mA */
-+
-+#define BAT_INFO_POWER "power" /* mW */
-+#define BAT_INFO_POWER_NOW "power_now" /* mW */
-+
-+/* The following capacity/charge properties are represented in either
-+ mA or mW. The CAP_UNITS property MUST be provided if any of these are. */
-+#define BAT_INFO_RATE "rate" /* CAP_UNITS */
-+#define BAT_INFO_CAP_LEFT "capacity_left" /* CAP_UNITS*h */
-+#define BAT_INFO_CAP_DESIGN "capacity_design" /* CAP_UNITS*h */
-+#define BAT_INFO_CAP_LAST_FULL "capacity_last_full" /* CAP_UNITS*h */
-+#define BAT_INFO_CAP_LOW "capacity_low_thresh" /* CAP_UNITS*h */
-+#define BAT_INFO_CAP_WARN "capacity_warn_thresh" /* CAP_UNITS*h */
-+#define BAT_INFO_CAP_UNITS "capacity_units" /* string: must be
-+ either mA or mW */
-+
-+#define BAT_INFO_CAP_PCT "capacity_percentage" /* integer */
-+
-+#define BAT_INFO_TIME_EMPTY "time_to_empty" /* seconds */
-+#define BAT_INFO_TIME_EMPTY_NOW "time_to_empty_now" /* seconds */
-+#define BAT_INFO_TIME_FULL "time_to_full" /* seconds */
-+#define BAT_INFO_TIME_FULL_NOW "time_to_full_now" /* seconds */
-+
-+#define BAT_INFO_MANUFACTURER "manufacturer" /* string */
-+#define BAT_INFO_TECHNOLOGY "technology" /* string */
-+#define BAT_INFO_MODEL "model" /* string */
-+#define BAT_INFO_SERIAL "serial" /* string */
-+#define BAT_INFO_OEM_INFO "oem_info" /* string */
-+
-+#define BAT_INFO_CYCLE_COUNT "cycle_count" /* integer */
-+#define BAT_INFO_DATE_MFR "date_manufactured" /* YYYY[-MM[-DD]] */
-+#define BAT_INFO_DATE_FIRST_USE "date_first_use" /* YYYY[-MM[-DD]] */
-+
-+struct battery_dev {
-+ int status_cap;
-+ int id;
-+ int type;
-+ const char *name;
-+
-+ struct device *dev;
-+};
-+
-+int battery_device_register(struct device *parent,
-+ struct battery_dev *battery_cdev);
-+void battery_device_unregister(struct battery_dev *battery_cdev);
-+
-+
-+ssize_t battery_attribute_show_status(char *buf, unsigned long status);
-+ssize_t battery_attribute_show_ac_status(char *buf, unsigned long status);
-+#endif /* __LINUX_BATTERY_H__ */
diff --git a/include/linux/console.h b/include/linux/console.h
index 56a7bcd..1a8b034 100644
--- a/include/linux/console.h
@@ -17839,139 +5790,6 @@ index cec5410..6b59db5 100644
extern struct fb_info *registered_fb[FB_MAX];
extern int num_registered_fb;
extern struct class *fb_class;
-diff --git a/include/linux/isl_38xx.h b/include/linux/isl_38xx.h
-new file mode 100644
-index 0000000..c7e98f2
---- /dev/null
-+++ b/include/linux/isl_38xx.h
-@@ -0,0 +1,127 @@
-+/*
-+ * Copyright (C) 2002 Intersil Americas Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef _LINUX_ISL_38XX_H
-+#define _LINUX_ISL_38XX_H
-+
-+#include <asm/io.h>
-+
-+#define ISL38XX_CB_RX_QSIZE 8
-+#define ISL38XX_CB_TX_QSIZE 32
-+
-+/* ISL38XX Access Point Specific definitions */
-+#define ISL38XX_MAX_WDS_LINKS 8
-+
-+/* ISL38xx Client Specific definitions */
-+#define ISL38XX_PSM_ACTIVE_STATE 0
-+#define ISL38XX_PSM_POWERSAVE_STATE 1
-+
-+/* ISL38XX Host Interface Definitions */
-+#define ISL38XX_PCI_MEM_SIZE 0x02000
-+#define ISL38XX_MEMORY_WINDOW_SIZE 0x01000
-+#define ISL38XX_DEV_FIRMWARE_ADDRES 0x20000
-+#define ISL38XX_WRITEIO_DELAY 10 /* in us */
-+#define ISL38XX_RESET_DELAY 50 /* in ms */
-+#define ISL38XX_WAIT_CYCLE 10 /* in 10ms */
-+#define ISL38XX_MAX_WAIT_CYCLES 10
-+
-+/* PCI Memory Area */
-+#define ISL38XX_HARDWARE_REG 0x0000
-+#define ISL38XX_CARDBUS_CIS 0x0800
-+#define ISL38XX_DIRECT_MEM_WIN 0x1000
-+
-+/* Hardware registers */
-+#define ISL38XX_DEV_INT_REG 0x0000
-+#define ISL38XX_INT_IDENT_REG 0x0010
-+#define ISL38XX_INT_ACK_REG 0x0014
-+#define ISL38XX_INT_EN_REG 0x0018
-+#define ISL38XX_GEN_PURP_COM_REG_1 0x0020
-+#define ISL38XX_GEN_PURP_COM_REG_2 0x0024
-+#define ISL38XX_CTRL_BLK_BASE_REG ISL38XX_GEN_PURP_COM_REG_1
-+#define ISL38XX_DIR_MEM_BASE_REG 0x0030
-+#define ISL38XX_CTRL_STAT_REG 0x0078
-+
-+/* High end mobos queue up pci writes, the following
-+ * is used to "read" from after a write to force flush */
-+#define ISL38XX_PCI_POSTING_FLUSH ISL38XX_INT_EN_REG
-+
-+/**
-+ * isl38xx_w32_flush - PCI iomem write helper
-+ * @base: (host) memory base address of the device
-+ * @val: 32bit value (host order) to write
-+ * @offset: byte offset into @base to write value to
-+ *
-+ * This helper takes care of writing a 32bit datum to the
-+ * specified offset into the device's pci memory space, and making sure
-+ * the pci memory buffers get flushed by performing one harmless read
-+ * from the %ISL38XX_PCI_POSTING_FLUSH offset.
-+ */
-+static inline void
-+isl38xx_w32_flush(void __iomem *base, u32 val, unsigned long offset)
-+{
-+ writel(val, base + offset);
-+ (void) readl(base + ISL38XX_PCI_POSTING_FLUSH);
-+}
-+
-+/* Device Interrupt register bits */
-+#define ISL38XX_DEV_INT_RESET 0x0001
-+#define ISL38XX_DEV_INT_UPDATE 0x0002
-+#define ISL38XX_DEV_INT_WAKEUP 0x0008
-+#define ISL38XX_DEV_INT_SLEEP 0x0010
-+#define ISL38XX_DEV_INT_ABORT 0x0020
-+/* thos two only used in USB */
-+#define ISL38XX_DEV_INT_DATA 0x0040
-+#define ISL38XX_DEV_INT_MGMT 0x0080
-+
-+#define ISL38XX_DEV_INT_PCIUART_CTS 0x4000
-+#define ISL38XX_DEV_INT_PCIUART_DR 0x8000
-+
-+/* Interrupt Identification/Acknowledge/Enable register bits */
-+#define ISL38XX_INT_IDENT_UPDATE 0x0002
-+#define ISL38XX_INT_IDENT_INIT 0x0004
-+#define ISL38XX_INT_IDENT_WAKEUP 0x0008
-+#define ISL38XX_INT_IDENT_SLEEP 0x0010
-+#define ISL38XX_INT_IDENT_PCIUART_CTS 0x4000
-+#define ISL38XX_INT_IDENT_PCIUART_DR 0x8000
-+
-+#define ISL38XX_INT_SOURCES (ISL38XX_INT_IDENT_UPDATE | \
-+ ISL38XX_INT_IDENT_INIT | \
-+ ISL38XX_INT_IDENT_WAKEUP | \
-+ ISL38XX_INT_IDENT_SLEEP | \
-+ ISL38XX_INT_IDENT_PCIUART_CTS | \
-+ ISL38XX_INT_IDENT_PCIUART_DR)
-+
-+/* Control/Status register bits */
-+/* Looks like there are other meaningful bits
-+ 0x20004400 seen in normal operation,
-+ 0x200044db at 'timeout waiting for mgmt response'
-+*/
-+#define ISL38XX_CTRL_STAT_SLEEPMODE 0x00000200
-+#define ISL38XX_CTRL_STAT_CLKRUN 0x00800000
-+#define ISL38XX_CTRL_STAT_RESET 0x10000000
-+#define ISL38XX_CTRL_STAT_RAMBOOT 0x20000000
-+#define ISL38XX_CTRL_STAT_STARTHALTED 0x40000000
-+#define ISL38XX_CTRL_STAT_HOST_OVERRIDE 0x80000000
-+
-+/* Some flags for the isl hardware registers controlling DMA inside the
-+ * chip */
-+#define ISL38XX_DMA_STATUS_DONE 0x00000001
-+#define ISL38XX_DMA_STATUS_READY 0x00000002
-+#define NET2280_EPA_FIFO_PCI_ADDR 0x20000000
-+#define ISL38XX_DMA_MASTER_CONTROL_TRIGGER 0x00000004
-+
-+#endif /* _LINUX_ISL_38XX_H */
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index a56d24a..fd0a260 100644
--- a/include/linux/mtd/onenand.h
@@ -18073,23 +5891,6 @@ index 699b7e9..b44facf 100644
+}
+
#endif /* _VT_KERN_H */
-diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h
-index 246ac23..874a2c8 100644
---- a/include/sound/ac97_codec.h
-+++ b/include/sound/ac97_codec.h
-@@ -281,10 +281,12 @@
- /* specific - Analog Devices */
- #define AC97_AD_TEST 0x5a /* test register */
- #define AC97_AD_TEST2 0x5c /* undocumented test register 2 */
-+#define AC97_AD_HPFD_SHIFT 12 /* High Pass Filter Disable */
- #define AC97_AD_CODEC_CFG 0x70 /* codec configuration */
- #define AC97_AD_JACK_SPDIF 0x72 /* Jack Sense & S/PDIF */
- #define AC97_AD_SERIAL_CFG 0x74 /* Serial Configuration */
- #define AC97_AD_MISC 0x76 /* Misc Control Bits */
-+#define AC97_AD_VREFD_SHIFT 2 /* V_REFOUT Disable (AD1888) */
-
- /* specific - Cirrus Logic */
- #define AC97_CSR_ACMODE 0x5e /* AC Mode Register */
diff --git a/kernel/power/console.c b/kernel/power/console.c
index 89bcf49..dca98f5 100644
--- a/kernel/power/console.c
@@ -18103,516 +5904,3 @@ index 89bcf49..dca98f5 100644
#define SUSPEND_CONSOLE (MAX_NR_CONSOLES-1)
static int orig_fgconsole, orig_kmsg;
-diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
-index bbed644..090e852 100644
---- a/sound/pci/ac97/ac97_codec.c
-+++ b/sound/pci/ac97/ac97_codec.c
-@@ -49,7 +49,7 @@ module_param(enable_loopback, bool, 0444);
- MODULE_PARM_DESC(enable_loopback, "Enable AC97 ADC/DAC Loopback Control");
-
- #ifdef CONFIG_SND_AC97_POWER_SAVE
--static int power_save;
-+static int power_save = 1;
- module_param(power_save, bool, 0644);
- MODULE_PARM_DESC(power_save, "Enable AC97 power-saving control");
- #endif
-diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
-index 581ebba..06637f7 100644
---- a/sound/pci/ac97/ac97_patch.c
-+++ b/sound/pci/ac97/ac97_patch.c
-@@ -1973,8 +1973,9 @@ static const struct snd_kcontrol_new snd_ac97_ad1888_controls[] = {
- .get = snd_ac97_ad1888_lohpsel_get,
- .put = snd_ac97_ad1888_lohpsel_put
- },
-- AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, 2, 1, 1),
-- AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, 12, 1, 1),
-+ AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, AC97_AD_VREFD_SHIFT, 1, 1),
-+ AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2,
-+ AC97_AD_HPFD_SHIFT, 1, 1),
- AC97_SINGLE("Spread Front to Surround and Center/LFE", AC97_AD_MISC, 7, 1, 0),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-diff --git a/sound/pci/cs5535audio/Makefile b/sound/pci/cs5535audio/Makefile
-index ad947b4..3866c4d 100644
---- a/sound/pci/cs5535audio/Makefile
-+++ b/sound/pci/cs5535audio/Makefile
-@@ -8,5 +8,9 @@ ifeq ($(CONFIG_PM),y)
- snd-cs5535audio-objs += cs5535audio_pm.o
- endif
-
-+ifdef CONFIG_OLPC
-+snd-cs5535audio-objs += cs5535audio_olpc.o
-+endif
-+
- # Toplevel Module Dependency
- obj-$(CONFIG_SND_CS5535AUDIO) += snd-cs5535audio.o
-diff --git a/sound/pci/cs5535audio/cs5535audio.c b/sound/pci/cs5535audio/cs5535audio.c
-index b8e75ef..389d9da 100644
---- a/sound/pci/cs5535audio/cs5535audio.c
-+++ b/sound/pci/cs5535audio/cs5535audio.c
-@@ -145,7 +145,7 @@ static unsigned short snd_cs5535audio_ac97_codec_read(struct snd_ac97 *ac97,
- return snd_cs5535audio_codec_read(cs5535au, reg);
- }
-
--static int snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
-+static int __devinit snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
- {
- struct snd_card *card = cs5535au->card;
- struct snd_ac97_bus *pbus;
-@@ -160,10 +160,14 @@ static int snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
- return err;
-
- memset(&ac97, 0, sizeof(ac97));
-- ac97.scaps = AC97_SCAP_AUDIO|AC97_SCAP_SKIP_MODEM;
-+ ac97.scaps = AC97_SCAP_AUDIO | AC97_SCAP_SKIP_MODEM
-+ | AC97_SCAP_POWER_SAVE;
- ac97.private_data = cs5535au;
- ac97.pci = cs5535au->pci;
-
-+ /* olpc_prequirks is dummied out if not olpc */
-+ olpc_prequirks(card, &ac97);
-+
- if ((err = snd_ac97_mixer(pbus, &ac97, &cs5535au->ac97)) < 0) {
- snd_printk(KERN_ERR "mixer failed\n");
- return err;
-@@ -171,6 +175,12 @@ static int snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
-
- snd_ac97_tune_hardware(cs5535au->ac97, ac97_quirks, ac97_quirk);
-
-+ /* olpc_quirks is dummied out if not olpc */
-+ if (( err = olpc_quirks(card, cs5535au->ac97)) < 0) {
-+ snd_printk(KERN_ERR "olpc quirks failed\n");
-+ return err;
-+ }
-+
- return 0;
- }
-
-@@ -206,7 +216,6 @@ static void process_bm1_irq(struct cs5535audio *cs5535au)
- static irqreturn_t snd_cs5535audio_interrupt(int irq, void *dev_id)
- {
- u16 acc_irq_stat;
-- u8 bm_stat;
- unsigned char count;
- struct cs5535audio *cs5535au = dev_id;
-
-@@ -217,7 +226,7 @@ static irqreturn_t snd_cs5535audio_interrupt(int irq, void *dev_id)
-
- if (!acc_irq_stat)
- return IRQ_NONE;
-- for (count = 0; count < 10; count++) {
-+ for (count = 0; count < 4; count++) {
- if (acc_irq_stat & (1 << count)) {
- switch (count) {
- case IRQ_STS:
-@@ -232,26 +241,9 @@ static irqreturn_t snd_cs5535audio_interrupt(int irq, void *dev_id)
- case BM1_IRQ_STS:
- process_bm1_irq(cs5535au);
- break;
-- case BM2_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM2_STATUS);
-- break;
-- case BM3_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM3_STATUS);
-- break;
-- case BM4_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM4_STATUS);
-- break;
-- case BM5_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM5_STATUS);
-- break;
-- case BM6_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM6_STATUS);
-- break;
-- case BM7_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM7_STATUS);
-- break;
- default:
-- snd_printk(KERN_ERR "Unexpected irq src\n");
-+ snd_printk(KERN_ERR "Unexpected irq src: "
-+ "0x%x\n", acc_irq_stat);
- break;
- }
- }
-diff --git a/sound/pci/cs5535audio/cs5535audio.h b/sound/pci/cs5535audio/cs5535audio.h
-index 4fd1f31..ff82f10 100644
---- a/sound/pci/cs5535audio/cs5535audio.h
-+++ b/sound/pci/cs5535audio/cs5535audio.h
-@@ -16,57 +16,28 @@
- #define ACC_IRQ_STATUS 0x12
- #define ACC_BM0_CMD 0x20
- #define ACC_BM1_CMD 0x28
--#define ACC_BM2_CMD 0x30
--#define ACC_BM3_CMD 0x38
--#define ACC_BM4_CMD 0x40
--#define ACC_BM5_CMD 0x48
--#define ACC_BM6_CMD 0x50
--#define ACC_BM7_CMD 0x58
- #define ACC_BM0_PRD 0x24
- #define ACC_BM1_PRD 0x2C
--#define ACC_BM2_PRD 0x34
--#define ACC_BM3_PRD 0x3C
--#define ACC_BM4_PRD 0x44
--#define ACC_BM5_PRD 0x4C
--#define ACC_BM6_PRD 0x54
--#define ACC_BM7_PRD 0x5C
- #define ACC_BM0_STATUS 0x21
- #define ACC_BM1_STATUS 0x29
--#define ACC_BM2_STATUS 0x31
--#define ACC_BM3_STATUS 0x39
--#define ACC_BM4_STATUS 0x41
--#define ACC_BM5_STATUS 0x49
--#define ACC_BM6_STATUS 0x51
--#define ACC_BM7_STATUS 0x59
- #define ACC_BM0_PNTR 0x60
- #define ACC_BM1_PNTR 0x64
--#define ACC_BM2_PNTR 0x68
--#define ACC_BM3_PNTR 0x6C
--#define ACC_BM4_PNTR 0x70
--#define ACC_BM5_PNTR 0x74
--#define ACC_BM6_PNTR 0x78
--#define ACC_BM7_PNTR 0x7C
-+
- /* acc_codec bar0 reg bits */
- /* ACC_IRQ_STATUS */
- #define IRQ_STS 0
- #define WU_IRQ_STS 1
- #define BM0_IRQ_STS 2
- #define BM1_IRQ_STS 3
--#define BM2_IRQ_STS 4
--#define BM3_IRQ_STS 5
--#define BM4_IRQ_STS 6
--#define BM5_IRQ_STS 7
--#define BM6_IRQ_STS 8
--#define BM7_IRQ_STS 9
- /* ACC_BMX_STATUS */
- #define EOP (1<<0)
- #define BM_EOP_ERR (1<<1)
- /* ACC_BMX_CTL */
--#define BM_CTL_EN 0x00000001
--#define BM_CTL_PAUSE 0x00000011
--#define BM_CTL_DIS 0x00000000
--#define BM_CTL_BYTE_ORD_LE 0x00000000
--#define BM_CTL_BYTE_ORD_BE 0x00000100
-+#define BM_CTL_EN 0x01
-+#define BM_CTL_PAUSE 0x03
-+#define BM_CTL_DIS 0x00
-+#define BM_CTL_BYTE_ORD_LE 0x00
-+#define BM_CTL_BYTE_ORD_BE 0x04
- /* cs5535 specific ac97 codec register defines */
- #define CMD_MASK 0xFF00FFFF
- #define CMD_NEW 0x00010000
-@@ -106,8 +77,8 @@ struct cs5535audio_dma {
- struct snd_pcm_substream *substream;
- unsigned int buf_addr, buf_bytes;
- unsigned int period_bytes, periods;
-- int suspended;
- u32 saved_prd;
-+ int pcm_open_flag;
- };
-
- struct cs5535audio {
-@@ -123,8 +94,21 @@ struct cs5535audio {
- struct cs5535audio_dma dmas[NUM_CS5535AUDIO_DMAS];
- };
-
-+#ifdef CONFIG_PM
- int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state);
- int snd_cs5535audio_resume(struct pci_dev *pci);
-+#endif
-+
-+#ifdef CONFIG_OLPC
-+void olpc_prequirks(struct snd_card *card, struct snd_ac97_template *ac97) __devinit;
-+int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) __devinit;
-+int olpc_ai_enable(struct snd_ac97 *ac97, u8 val);
-+#else
-+#define olpc_prequirks(arg,arg2) do {} while (0)
-+#define olpc_quirks(arg,arg2) (0)
-+#define olpc_ai_enable(a, v) (0)
-+#endif
-+
- int __devinit snd_cs5535audio_pcm(struct cs5535audio *cs5535audio);
-
- #endif /* __SOUND_CS5535AUDIO_H */
-diff --git a/sound/pci/cs5535audio/cs5535audio_olpc.c b/sound/pci/cs5535audio/cs5535audio_olpc.c
-new file mode 100644
-index 0000000..791be73
---- /dev/null
-+++ b/sound/pci/cs5535audio/cs5535audio_olpc.c
-@@ -0,0 +1,110 @@
-+#include <sound/driver.h>
-+#include <sound/core.h>
-+#include <sound/info.h>
-+#include <sound/control.h>
-+#include <sound/ac97_codec.h>
-+
-+#include <asm/olpc.h>
-+#include "cs5535audio.h"
-+
-+/*
-+ * OLPC has an additional feature on top of the regular AD1888 codec features.
-+ * It has an Analog Input mode that is switched into (after disabling the
-+ * High Pass Filter) via GPIO. It is only supported on B2 and later models.
-+ */
-+
-+int olpc_ai_enable(struct snd_ac97 *ac97, u8 val)
-+{
-+ int err;
-+
-+ /*
-+ * update the High Pass Filter (via AC97_AD_TEST2), and then set
-+ * Analog Input mode through a GPIO.
-+ */
-+
-+ if (val) {
-+ err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
-+ 1<<AC97_AD_HPFD_SHIFT, 1<<AC97_AD_HPFD_SHIFT);
-+ geode_gpio_set(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
-+ }
-+ else {
-+ err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
-+ 1<<AC97_AD_HPFD_SHIFT, 0);
-+ geode_gpio_clear(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
-+ }
-+ if (err < 0)
-+ snd_printk(KERN_ERR "Error updating AD_TEST2: %d\n", err);
-+
-+ return err;
-+}
-+EXPORT_SYMBOL_GPL(olpc_ai_enable);
-+
-+static int snd_cs5535audio_ai_info(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+ uinfo->count = 1;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = 1;
-+ return 0;
-+}
-+
-+static int snd_cs5535audio_ai_get(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ ucontrol->value.integer.value[0] = geode_gpio_isset(OLPC_GPIO_MIC_AC,
-+ GPIO_OUTPUT_VAL);
-+ return 0;
-+}
-+
-+static int snd_cs5535audio_ai_put(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct cs5535audio *cs5535au = snd_kcontrol_chip(kcontrol);
-+ struct snd_ac97 *ac97 = cs5535au->ac97;
-+
-+ olpc_ai_enable(ac97, ucontrol->value.integer.value[0]);
-+
-+ return 1;
-+}
-+
-+static struct snd_kcontrol_new snd_cs5535audio_controls __devinitdata =
-+{
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .name = "DC Mode Enable",
-+ .info = snd_cs5535audio_ai_info,
-+ .get = snd_cs5535audio_ai_get,
-+ .put = snd_cs5535audio_ai_put,
-+ .private_value = 0
-+};
-+
-+void __devinit olpc_prequirks(struct snd_card *card,
-+ struct snd_ac97_template *ac97)
-+{
-+ /* Bail if this isn't an OLPC platform */
-+ if (!machine_is_olpc())
-+ return;
-+
-+ /* If on an OLPC B3 or higher, invert EAPD. */
-+ if (olpc_rev_after(OLPC_REV_B2))
-+ ac97->scaps |= AC97_SCAP_INV_EAPD;
-+}
-+
-+int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97)
-+{
-+ struct snd_ctl_elem_id elem;
-+
-+ /* Bail if this isn't an OLPC platform */
-+ if (!machine_is_olpc())
-+ return 0;
-+
-+ /* drop the original ad1888 HPF control */
-+ memset(&elem, 0, sizeof(elem));
-+ elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
-+ strcpy(elem.name, "High Pass Filter Enable");
-+ snd_ctl_remove_id(card, &elem);
-+
-+ /* add the override for OLPC's HPF */
-+ return snd_ctl_add(card, snd_ctl_new1(&snd_cs5535audio_controls,
-+ ac97->private_data));
-+}
-diff --git a/sound/pci/cs5535audio/cs5535audio_pcm.c b/sound/pci/cs5535audio/cs5535audio_pcm.c
-index 5450a9e..d23f8ea 100644
---- a/sound/pci/cs5535audio/cs5535audio_pcm.c
-+++ b/sound/pci/cs5535audio/cs5535audio_pcm.c
-@@ -164,6 +164,7 @@ static int cs5535audio_build_dma_packets(struct cs5535audio *cs5535au,
- jmpprd_addr = cpu_to_le32(lastdesc->addr +
- (sizeof(struct cs5535audio_dma_desc)*periods));
-
-+ dma->substream = substream;
- dma->period_bytes = period_bytes;
- dma->periods = periods;
- spin_lock_irq(&cs5535au->reg_lock);
-@@ -241,6 +242,7 @@ static void cs5535audio_clear_dma_packets(struct cs5535audio *cs5535au,
- {
- snd_dma_free_pages(&dma->desc_buf);
- dma->desc_buf.area = NULL;
-+ dma->substream = NULL;
- }
-
- static int snd_cs5535audio_hw_params(struct snd_pcm_substream *substream,
-@@ -260,6 +262,9 @@ static int snd_cs5535audio_hw_params(struct snd_pcm_substream *substream,
- err = cs5535audio_build_dma_packets(cs5535au, dma, substream,
- params_periods(hw_params),
- params_period_bytes(hw_params));
-+ if (!err)
-+ dma->pcm_open_flag = 1;
-+
- return err;
- }
-
-@@ -268,6 +273,15 @@ static int snd_cs5535audio_hw_free(struct snd_pcm_substream *substream)
- struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
- struct cs5535audio_dma *dma = substream->runtime->private_data;
-
-+ if (dma->pcm_open_flag) {
-+ if (substream == cs5535au->playback_substream)
-+ snd_ac97_update_power(cs5535au->ac97,
-+ AC97_PCM_FRONT_DAC_RATE, 0);
-+ else
-+ snd_ac97_update_power(cs5535au->ac97,
-+ AC97_PCM_LR_ADC_RATE, 0);
-+ dma->pcm_open_flag = 0;
-+ }
- cs5535audio_clear_dma_packets(cs5535au, dma, substream);
- return snd_pcm_lib_free_pages(substream);
- }
-@@ -298,14 +312,12 @@ static int snd_cs5535audio_trigger(struct snd_pcm_substream *substream, int cmd)
- break;
- case SNDRV_PCM_TRIGGER_RESUME:
- dma->ops->enable_dma(cs5535au);
-- dma->suspended = 0;
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- dma->ops->disable_dma(cs5535au);
- break;
- case SNDRV_PCM_TRIGGER_SUSPEND:
- dma->ops->disable_dma(cs5535au);
-- dma->suspended = 1;
- break;
- default:
- snd_printk(KERN_ERR "unhandled trigger\n");
-@@ -344,6 +356,7 @@ static int snd_cs5535audio_capture_open(struct snd_pcm_substream *substream)
- int err;
- struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct snd_ac97 *ac97 = cs5535au->ac97;
-
- runtime->hw = snd_cs5535audio_capture;
- cs5535au->capture_substream = substream;
-@@ -352,11 +365,29 @@ static int snd_cs5535audio_capture_open(struct snd_pcm_substream *substream)
- if ((err = snd_pcm_hw_constraint_integer(runtime,
- SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
- return err;
-- return 0;
-+
-+#ifdef CONFIG_OLPC
-+ /* Disable Analog Input */
-+ olpc_ai_enable(ac97, 0);
-+ /* Enable V_ref bias while recording. */
-+ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<<AC97_AD_VREFD_SHIFT, 0);
-+#endif
-+ return err;
- }
-
- static int snd_cs5535audio_capture_close(struct snd_pcm_substream *substream)
- {
-+#ifdef CONFIG_OLPC
-+ struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
-+ struct snd_ac97 *ac97 = cs5535au->ac97;
-+
-+ /* Disable Analog Input */
-+ olpc_ai_enable(ac97, 0);
-+ /* Disable V_ref bias. */
-+ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<<AC97_AD_VREFD_SHIFT,
-+ 1<<AC97_AD_VREFD_SHIFT);
-+#endif
-+
- return 0;
- }
-
-diff --git a/sound/pci/cs5535audio/cs5535audio_pm.c b/sound/pci/cs5535audio/cs5535audio_pm.c
-index 3e4d198..838708f 100644
---- a/sound/pci/cs5535audio/cs5535audio_pm.c
-+++ b/sound/pci/cs5535audio/cs5535audio_pm.c
-@@ -64,18 +64,21 @@ int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state)
- int i;
-
- snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
-+ snd_pcm_suspend_all(cs5535au->pcm);
-+ snd_ac97_suspend(cs5535au->ac97);
- for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) {
- struct cs5535audio_dma *dma = &cs5535au->dmas[i];
-- if (dma && dma->substream && !dma->suspended)
-+ if (dma && dma->substream)
- dma->saved_prd = dma->ops->read_prd(cs5535au);
- }
-- snd_pcm_suspend_all(cs5535au->pcm);
-- snd_ac97_suspend(cs5535au->ac97);
- /* save important regs, then disable aclink in hw */
- snd_cs5535audio_stop_hardware(cs5535au);
-
-+ if (pci_save_state(pci)) {
-+ printk(KERN_ERR "cs5535audio: pci_save_state failed!\n");
-+ return -EIO;
-+ }
- pci_disable_device(pci);
-- pci_save_state(pci);
- pci_set_power_state(pci, pci_choose_state(pci, state));
- return 0;
- }
-@@ -89,7 +92,12 @@ int snd_cs5535audio_resume(struct pci_dev *pci)
- int i;
-
- pci_set_power_state(pci, PCI_D0);
-- pci_restore_state(pci);
-+ if (pci_restore_state(pci) < 0) {
-+ printk(KERN_ERR "cs5535audio: pci_restore_state failed, "
-+ "disabling device\n");
-+ snd_card_disconnect(card);
-+ return -EIO;
-+ }
- if (pci_enable_device(pci) < 0) {
- printk(KERN_ERR "cs5535audio: pci_enable_device failed, "
- "disabling device\n");
-@@ -112,17 +120,17 @@ int snd_cs5535audio_resume(struct pci_dev *pci)
- if (!timeout)
- snd_printk(KERN_ERR "Failure getting AC Link ready\n");
-
-- /* we depend on ac97 to perform the codec power up */
-- snd_ac97_resume(cs5535au->ac97);
- /* set up rate regs, dma. actual initiation is done in trig */
- for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) {
- struct cs5535audio_dma *dma = &cs5535au->dmas[i];
-- if (dma && dma->substream && dma->suspended) {
-+ if (dma && dma->substream) {
- dma->substream->ops->prepare(dma->substream);
- dma->ops->setup_prd(cs5535au, dma->saved_prd);
- }
- }
--
-+
-+ /* we depend on ac97 to perform the codec power up */
-+ snd_ac97_resume(cs5535au->ac97);
- snd_power_change_state(card, SNDRV_CTL_POWER_D0);
-
- return 0;