summaryrefslogtreecommitdiff
path: root/target/linux/lantiq/patches/105-header_xway.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/lantiq/patches/105-header_xway.patch')
-rw-r--r--target/linux/lantiq/patches/105-header_xway.patch565
1 files changed, 565 insertions, 0 deletions
diff --git a/target/linux/lantiq/patches/105-header_xway.patch b/target/linux/lantiq/patches/105-header_xway.patch
new file mode 100644
index 0000000000..f41e335a6c
--- /dev/null
+++ b/target/linux/lantiq/patches/105-header_xway.patch
@@ -0,0 +1,565 @@
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/xway/irq.h
+@@ -0,0 +1,18 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef __LANTIQ_IRQ_H
++#define __LANTIQ_IRQ_H
++
++#include <xway_irq.h>
++
++#define NR_IRQS 256
++
++#include_next <irq.h>
++
++#endif
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
+@@ -0,0 +1,155 @@
++#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
++#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
++
++
++/******************************************************************************
++ Copyright (c) 2002, Infineon Technologies. All rights reserved.
++
++ No Warranty
++ Because the program is licensed free of charge, there is no warranty for
++ the program, to the extent permitted by applicable law. Except when
++ otherwise stated in writing the copyright holders and/or other parties
++ provide the program "as is" without warranty of any kind, either
++ expressed or implied, including, but not limited to, the implied
++ warranties of merchantability and fitness for a particular purpose. The
++ entire risk as to the quality and performance of the program is with
++ you. should the program prove defective, you assume the cost of all
++ necessary servicing, repair or correction.
++
++ In no event unless required by applicable law or agreed to in writing
++ will any copyright holder, or any other party who may modify and/or
++ redistribute the program as permitted above, be liable to you for
++ damages, including any general, special, incidental or consequential
++ damages arising out of the use or inability to use the program
++ (including but not limited to loss of data or data being rendered
++ inaccurate or losses sustained by you or third parties or a failure of
++ the program to operate with any other programs), even if such holder or
++ other party has been advised of the possibility of such damages.
++******************************************************************************/
++
++
++/*
++ * ####################################
++ * Definition
++ * ####################################
++ */
++
++/*
++ * Available Timer/Counter Index
++ */
++#define TIMER(n, X) (n * 2 + (X ? 1 : 0))
++#define TIMER_ANY 0x00
++#define TIMER1A TIMER(1, 0)
++#define TIMER1B TIMER(1, 1)
++#define TIMER2A TIMER(2, 0)
++#define TIMER2B TIMER(2, 1)
++#define TIMER3A TIMER(3, 0)
++#define TIMER3B TIMER(3, 1)
++
++/*
++ * Flag of Timer/Counter
++ * These flags specify the way in which timer is configured.
++ */
++/* Bit size of timer/counter. */
++#define TIMER_FLAG_16BIT 0x0000
++#define TIMER_FLAG_32BIT 0x0001
++/* Switch between timer and counter. */
++#define TIMER_FLAG_TIMER 0x0000
++#define TIMER_FLAG_COUNTER 0x0002
++/* Stop or continue when overflowing/underflowing. */
++#define TIMER_FLAG_ONCE 0x0000
++#define TIMER_FLAG_CYCLIC 0x0004
++/* Count up or counter down. */
++#define TIMER_FLAG_UP 0x0000
++#define TIMER_FLAG_DOWN 0x0008
++/* Count on specific level or edge. */
++#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
++#define TIMER_FLAG_LOW_LEVEL_SENSITIVE 0x0040
++#define TIMER_FLAG_RISE_EDGE 0x0010
++#define TIMER_FLAG_FALL_EDGE 0x0020
++#define TIMER_FLAG_ANY_EDGE 0x0030
++/* Signal is syncronous to module clock or not. */
++#define TIMER_FLAG_UNSYNC 0x0000
++#define TIMER_FLAG_SYNC 0x0080
++/* Different interrupt handle type. */
++#define TIMER_FLAG_NO_HANDLE 0x0000
++#if defined(__KERNEL__)
++ #define TIMER_FLAG_CALLBACK_IN_IRQ 0x0100
++#endif // defined(__KERNEL__)
++#define TIMER_FLAG_SIGNAL 0x0300
++/* Internal clock source or external clock source */
++#define TIMER_FLAG_INT_SRC 0x0000
++#define TIMER_FLAG_EXT_SRC 0x1000
++
++
++/*
++ * ioctl Command
++ */
++#define GPTU_REQUEST_TIMER 0x01 /* General method to setup timer/counter. */
++#define GPTU_FREE_TIMER 0x02 /* Free timer/counter. */
++#define GPTU_START_TIMER 0x03 /* Start or resume timer/counter. */
++#define GPTU_STOP_TIMER 0x04 /* Suspend timer/counter. */
++#define GPTU_GET_COUNT_VALUE 0x05 /* Get current count value. */
++#define GPTU_CALCULATE_DIVIDER 0x06 /* Calculate timer divider from given freq.*/
++#define GPTU_SET_TIMER 0x07 /* Simplified method to setup timer. */
++#define GPTU_SET_COUNTER 0x08 /* Simplified method to setup counter. */
++
++/*
++ * Data Type Used to Call ioctl
++ */
++struct gptu_ioctl_param {
++ unsigned int timer; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and *
++ * GPTU_SET_COUNTER, this field is ID of expected *
++ * timer/counter. If it's zero, a timer/counter would *
++ * be dynamically allocated and ID would be stored in *
++ * this field. *
++ * In command GPTU_GET_COUNT_VALUE, this field is *
++ * ignored. *
++ * In other command, this field is ID of timer/counter *
++ * allocated. */
++ unsigned int flag; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and *
++ * GPTU_SET_COUNTER, this field contains flags to *
++ * specify how to configure timer/counter. *
++ * In command GPTU_START_TIMER, zero indicate start *
++ * and non-zero indicate resume timer/counter. *
++ * In other command, this field is ignored. */
++ unsigned long value; /* In command GPTU_REQUEST_TIMER, this field contains *
++ * init/reload value. *
++ * In command GPTU_SET_TIMER, this field contains *
++ * frequency (0.001Hz) of timer. *
++ * In command GPTU_GET_COUNT_VALUE, current count *
++ * value would be stored in this field. *
++ * In command GPTU_CALCULATE_DIVIDER, this field *
++ * contains frequency wanted, and after calculation, *
++ * divider would be stored in this field to overwrite *
++ * the frequency. *
++ * In other command, this field is ignored. */
++ int pid; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, *
++ * if signal is required, this field contains process *
++ * ID to which signal would be sent. *
++ * In other command, this field is ignored. */
++ int sig; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, *
++ * if signal is required, this field contains signal *
++ * number which would be sent. *
++ * In other command, this field is ignored. */
++};
++
++/*
++ * ####################################
++ * Data Type
++ * ####################################
++ */
++typedef void (*timer_callback)(unsigned long arg);
++
++extern int ifxmips_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
++extern int ifxmips_free_timer(unsigned int);
++extern int ifxmips_start_timer(unsigned int, int);
++extern int ifxmips_stop_timer(unsigned int);
++extern int ifxmips_reset_counter_flags(u32 timer, u32 flags);
++extern int ifxmips_get_count_value(unsigned int, unsigned long *);
++extern u32 ifxmips_cal_divider(unsigned long);
++extern int ifxmips_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
++extern int ifxmips_set_counter(unsigned int timer, unsigned int flag,
++ u32 reload, unsigned long arg1, unsigned long arg2);
++
++#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/xway/xway.h
+@@ -0,0 +1,121 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2005 infineon
++ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#ifdef CONFIG_SOC_LANTIQ_XWAY
++
++#ifndef _LQ_XWAY_H__
++#define _LQ_XWAY_H__
++
++#include <lantiq.h>
++
++/* request a non-gpio and set the PIO config */
++extern int lq_gpio_request(unsigned int pin, unsigned int alt0,
++ unsigned int alt1, unsigned int dir, const char *name);
++extern int lq_gpio_setconfig(unsigned int pin, unsigned int reg, unsigned int val);
++
++extern void lq_pmu_enable(unsigned int module);
++extern void lq_pmu_disable(unsigned int module);
++
++extern unsigned int lq_get_fpi_bus_clock(int bus);
++
++#define BOARD_SYSTEM_TYPE "LANTIQ"
++
++/*------------ Chip IDs */
++#define SOC_ID_DANUBE1 0x129
++#define SOC_ID_DANUBE2 0x12B
++#define SOC_ID_TWINPASS 0x12D
++#define SOC_ID_ARX188 0x16C
++#define SOC_ID_ARX168 0x16D
++#define SOC_ID_ARX182 0x16F
++
++/*------------ SoC Types */
++#define SOC_TYPE_DANUBE 0x01
++#define SOC_TYPE_TWINPASS 0x02
++#define SOC_TYPE_AR9 0x03
++
++/*------------ ASC0/1 */
++#define LQ_ASC0_BASE 0x1E100400
++#define LQ_ASC1_BASE 0x1E100C00
++#define LQ_ASC_SIZE 0x400
++
++/*------------ RCU */
++#define LQ_RCU_BASE_ADDR 0xBF203000
++
++/*------------ GPTU */
++#define LQ_GPTU_BASE_ADDR 0xB8000300
++
++/*------------ EBU */
++#define LQ_EBU_GPIO_START 0x14000000
++#define LQ_EBU_GPIO_SIZE 0x1000
++
++#define LQ_EBU_BASE_ADDR 0xBE105300
++
++#define LQ_EBU_BUSCON0 ((u32 *)(LQ_EBU_BASE_ADDR + 0x0060))
++#define LQ_EBU_PCC_CON ((u32 *)(LQ_EBU_BASE_ADDR + 0x0090))
++#define LQ_EBU_PCC_IEN ((u32 *)(LQ_EBU_BASE_ADDR + 0x00A4))
++#define LQ_EBU_PCC_ISTAT ((u32 *)(LQ_EBU_BASE_ADDR + 0x00A0))
++#define LQ_EBU_BUSCON1 ((u32 *)(LQ_EBU_BASE_ADDR + 0x0064))
++#define LQ_EBU_ADDRSEL1 ((u32 *)(LQ_EBU_BASE_ADDR + 0x0024))
++
++#define EBU_WRDIS 0x80000000
++
++/*------------ CGU */
++#define LQ_CGU_BASE_ADDR (KSEG1 + 0x1F103000)
++
++/*------------ PMU */
++#define LQ_PMU_BASE_ADDR (KSEG1 + 0x1F102000)
++
++#define PMU_DMA 0x0020
++#define PMU_USB 0x8041
++#define PMU_LED 0x0800
++#define PMU_GPT 0x1000
++#define PMU_PPE 0x2000
++#define PMU_FPI 0x4000
++#define PMU_SWITCH 0x10000000
++
++/*------------ ETOP */
++#define LQ_PPE32_BASE_ADDR 0xBE180000
++#define LQ_PPE32_SIZE 0x40000
++
++/*------------ DMA */
++#define LQ_DMA_BASE_ADDR 0xBE104100
++
++/*------------ PCI */
++#define PCI_CR_PR_BASE_ADDR (KSEG1 + 0x1E105400)
++#define PCI_CS_PR_BASE_ADDR (KSEG1 + 0x17000000)
++
++/*------------ WDT */
++#define LQ_WDT_BASE 0x1F880000
++#define LQ_WDT_SIZE 0x400
++
++/*------------ Serial To Parallel conversion */
++#define LQ_STP_BASE 0x1E100BB0
++#define LQ_STP_SIZE 0x40
++
++/*------------ GPIO */
++#define LQ_GPIO0_BASE_ADDR 0x1E100B10
++#define LQ_GPIO1_BASE_ADDR 0x1E100B40
++#define LQ_GPIO_SIZE 0x30
++
++/*------------ SSC */
++#define LQ_SSC_BASE_ADDR (KSEG1 + 0x1e100800)
++
++/*------------ MEI */
++#define LQ_MEI_BASE_ADDR (KSEG1 + 0x1E116000)
++
++/*------------ DEU */
++#define LQ_DEU_BASE (KSEG1 + 0x1E103100)
++
++/*------------ MPS */
++#define LQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000)
++#define LQ_MPS_CHIPID ((u32 *)(LQ_MPS_BASE_ADDR + 0x0344))
++
++#endif
++
++#endif
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
+@@ -0,0 +1,144 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2005 infineon
++ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
++ *
++ */
++#ifndef _LQ_DMA_H__
++#define _LQ_DMA_H__
++
++#define RCV_INT 1
++#define TX_BUF_FULL_INT 2
++#define TRANSMIT_CPT_INT 4
++#define LQ_DMA_CH_ON 1
++#define LQ_DMA_CH_OFF 0
++#define LQ_DMA_CH_DEFAULT_WEIGHT 100
++
++enum attr_t{
++ TX = 0,
++ RX = 1,
++ RESERVED = 2,
++ DEFAULT = 3,
++};
++
++#define DMA_OWN 1
++#define CPU_OWN 0
++#define DMA_MAJOR 250
++
++#define DMA_DESC_OWN_CPU 0x0
++#define DMA_DESC_OWN_DMA 0x80000000
++#define DMA_DESC_CPT_SET 0x40000000
++#define DMA_DESC_SOP_SET 0x20000000
++#define DMA_DESC_EOP_SET 0x10000000
++
++#define MISCFG_MASK 0x40
++#define RDERR_MASK 0x20
++#define CHOFF_MASK 0x10
++#define DESCPT_MASK 0x8
++#define DUR_MASK 0x4
++#define EOP_MASK 0x2
++
++#define DMA_DROP_MASK (1<<31)
++
++#define LQ_DMA_RX -1
++#define LQ_DMA_TX 1
++
++struct dma_chan_map {
++ const char *dev_name;
++ enum attr_t dir;
++ int pri;
++ int irq;
++ int rel_chan_no;
++};
++
++#ifdef CONFIG_CPU_LITTLE_ENDIAN
++struct rx_desc {
++ u32 data_length:16;
++ volatile u32 reserved:7;
++ volatile u32 byte_offset:2;
++ volatile u32 Burst_length_offset:3;
++ volatile u32 EoP:1;
++ volatile u32 Res:1;
++ volatile u32 C:1;
++ volatile u32 OWN:1;
++ volatile u32 Data_Pointer; /* fixme: should be 28 bits here */
++};
++
++struct tx_desc {
++ volatile u32 data_length:16;
++ volatile u32 reserved1:7;
++ volatile u32 byte_offset:5;
++ volatile u32 EoP:1;
++ volatile u32 SoP:1;
++ volatile u32 C:1;
++ volatile u32 OWN:1;
++ volatile u32 Data_Pointer; /* fixme: should be 28 bits here */
++};
++#else /* BIG */
++struct rx_desc {
++ union {
++ struct {
++ volatile u32 OWN:1;
++ volatile u32 C:1;
++ volatile u32 SoP:1;
++ volatile u32 EoP:1;
++ volatile u32 Burst_length_offset:3;
++ volatile u32 byte_offset:2;
++ volatile u32 reserve:7;
++ volatile u32 data_length:16;
++ } field;
++ volatile u32 word;
++ } status;
++ volatile u32 Data_Pointer;
++};
++
++struct tx_desc {
++ union {
++ struct {
++ volatile u32 OWN:1;
++ volatile u32 C:1;
++ volatile u32 SoP:1;
++ volatile u32 EoP:1;
++ volatile u32 byte_offset:5;
++ volatile u32 reserved:7;
++ volatile u32 data_length:16;
++ } field;
++ volatile u32 word;
++ } status;
++ volatile u32 Data_Pointer;
++};
++#endif /* ENDIAN */
++
++struct dma_channel_info {
++ /* relative channel number */
++ int rel_chan_no;
++ /* class for this channel for QoS */
++ int pri;
++ /* specify byte_offset */
++ int byte_offset;
++ /* direction */
++ int dir;
++ /* irq number */
++ int irq;
++ /* descriptor parameter */
++ int desc_base;
++ int desc_len;
++ int curr_desc;
++ int prev_desc; /* only used if it is a tx channel*/
++ /* weight setting for WFQ algorithm*/
++ int weight;
++ int default_weight;
++ int packet_size;
++ int burst_len;
++ /* on or off of this channel */
++ int control;
++ /* optional information for the upper layer devices */
++#if defined(CONFIG_LQ_ETHERNET_D2) || defined(CONFIG_LQ_PPA)
++ void *opt[64];
++#else
++ void *opt[25];
++#endif
++ /* Pointer to the peripheral device who is using this channel */
++ void *dma_dev;
++ /* channel operations */
++ void (*open)(struct dma_channel_info *pCh);
++ void (*close)(struct dma_channel_info *pCh);
++ void (*reset)(struct dma_channel_info *pCh);
++ void (*enable_irq)(struct dma_channel_info *pCh);
++ void (*disable_irq)(struct dma_channel_info *pCh);
++};
++
++struct dma_device_info {
++ /* device name of this peripheral */
++ char device_name[15];
++ int reserved;
++ int tx_burst_len;
++ int rx_burst_len;
++ int default_weight;
++ int current_tx_chan;
++ int current_rx_chan;
++ int num_tx_chan;
++ int num_rx_chan;
++ int max_rx_chan_num;
++ int max_tx_chan_num;
++ struct dma_channel_info *tx_chan[20];
++ struct dma_channel_info *rx_chan[20];
++ /*functions, optional*/
++ u8 *(*buffer_alloc)(int len, int *offset, void **opt);
++ void (*buffer_free)(u8 *dataptr, void *opt);
++ int (*intr_handler)(struct dma_device_info *info, int status);
++ void *priv; /* used by peripheral driver only */
++};
++
++struct dma_device_info *dma_device_reserve(char *dev_name);
++void dma_device_release(struct dma_device_info *dev);
++void dma_device_register(struct dma_device_info *info);
++void dma_device_unregister(struct dma_device_info *info);
++int dma_device_read(struct dma_device_info *info, u8 **dataptr, void **opt);
++int dma_device_write(struct dma_device_info *info, u8 *dataptr, int len,
++ void *opt);
++
++#endif
++
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/xway/xway_irq.h
+@@ -0,0 +1,62 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _LANTIQ_XWAY_IRQ_H__
++#define _LANTIQ_XWAY_IRQ_H__
++
++#define INT_NUM_IRQ0 8
++#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0)
++#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32)
++#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64)
++#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96)
++#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128)
++#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
++
++#define LQ_ASC_TIR(x) (INT_NUM_IM3_IRL0 + (x * 7))
++#define LQ_ASC_RIR(x) (INT_NUM_IM3_IRL0 + (x * 7) + 2)
++#define LQ_ASC_EIR(x) (INT_NUM_IM3_IRL0 + (x * 7) + 3)
++
++#define LQ_SSC_TIR (INT_NUM_IM0_IRL0 + 15)
++#define LQ_SSC_RIR (INT_NUM_IM0_IRL0 + 14)
++#define LQ_SSC_EIR (INT_NUM_IM0_IRL0 + 16)
++
++#define LQ_MEI_DYING_GASP_INT (INT_NUM_IM1_IRL0 + 21)
++#define LQ_MEI_INT (INT_NUM_IM1_IRL0 + 23)
++
++#define LQ_TIMER6_INT (INT_NUM_IM1_IRL0 + 23)
++#define LQ_USB_INT (INT_NUM_IM1_IRL0 + 22)
++#define LQ_USB_OC_INT (INT_NUM_IM4_IRL0 + 23)
++
++#define MIPS_CPU_TIMER_IRQ 7
++
++#define LQ_DMA_CH0_INT (INT_NUM_IM2_IRL0)
++#define LQ_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1)
++#define LQ_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2)
++#define LQ_DMA_CH3_INT (INT_NUM_IM2_IRL0 + 3)
++#define LQ_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4)
++#define LQ_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5)
++#define LQ_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6)
++#define LQ_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7)
++#define LQ_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8)
++#define LQ_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9)
++#define LQ_DMA_CH10_INT (INT_NUM_IM2_IRL0 + 10)
++#define LQ_DMA_CH11_INT (INT_NUM_IM2_IRL0 + 11)
++#define LQ_DMA_CH12_INT (INT_NUM_IM2_IRL0 + 25)
++#define LQ_DMA_CH13_INT (INT_NUM_IM2_IRL0 + 26)
++#define LQ_DMA_CH14_INT (INT_NUM_IM2_IRL0 + 27)
++#define LQ_DMA_CH15_INT (INT_NUM_IM2_IRL0 + 28)
++#define LQ_DMA_CH16_INT (INT_NUM_IM2_IRL0 + 29)
++#define LQ_DMA_CH17_INT (INT_NUM_IM2_IRL0 + 30)
++#define LQ_DMA_CH18_INT (INT_NUM_IM2_IRL0 + 16)
++#define LQ_DMA_CH19_INT (INT_NUM_IM2_IRL0 + 21)
++
++#define LQ_PPE_MBOX_INT (INT_NUM_IM2_IRL0 + 24)
++
++#define INT_NUM_IM4_IRL14 (INT_NUM_IM4_IRL0 + 14)
++
++#endif