summaryrefslogtreecommitdiff
path: root/target/linux/lantiq/patches-3.3/0036-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/lantiq/patches-3.3/0036-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch')
-rw-r--r--target/linux/lantiq/patches-3.3/0036-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch1225
1 files changed, 1225 insertions, 0 deletions
diff --git a/target/linux/lantiq/patches-3.3/0036-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-3.3/0036-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
new file mode 100644
index 0000000000..48935385a1
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0036-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
@@ -0,0 +1,1225 @@
+From 59e21a2ab9b7554acf2c15dc9ee191e76bebade7 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 4 Nov 2011 16:00:34 +0100
+Subject: [PATCH 36/70] I2C: MIPS: lantiq: add FALC-ON i2c bus master
+
+This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: linux-i2c@vger.kernel.org
+---
+ .../include/asm/mach-lantiq/falcon/lantiq_soc.h | 5 +
+ arch/mips/lantiq/falcon/clk.c | 44 -
+ arch/mips/lantiq/falcon/devices.c | 16 +
+ arch/mips/lantiq/falcon/devices.h | 1 +
+ arch/mips/lantiq/falcon/mach-easy98000.c | 1 +
+ drivers/i2c/busses/Kconfig | 10 +
+ drivers/i2c/busses/Makefile | 1 +
+ drivers/i2c/busses/i2c-falcon.c | 1040 ++++++++++++++++++++
+ 8 files changed, 1074 insertions(+), 44 deletions(-)
+ delete mode 100644 arch/mips/lantiq/falcon/clk.c
+ create mode 100644 drivers/i2c/busses/i2c-falcon.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+index 120c56c..fff5ecd 100644
+--- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+@@ -72,6 +72,10 @@
+ #define LTQ_PADCTRL4_BASE_ADDR 0x1E800600
+ #define LTQ_PADCTRL4_SIZE 0x0100
+
++/* I2C */
++#define GPON_I2C_BASE 0x1E200000
++#define GPON_I2C_SIZE 0x00010000
++
+ /* CHIP ID */
+ #define LTQ_STATUS_BASE_ADDR 0x1E802000
+
+@@ -106,6 +110,7 @@
+ #define ACTS_PADCTRL2 0x00200000
+ #define ACTS_PADCTRL3 0x00200000
+ #define ACTS_PADCTRL4 0x00400000
++#define ACTS_I2C_ACT 0x00004000
+
+ /* global register ranges */
+ extern __iomem void *ltq_ebu_membase;
+diff --git a/arch/mips/lantiq/falcon/clk.c b/arch/mips/lantiq/falcon/clk.c
+deleted file mode 100644
+index afe1b52..0000000
+--- a/arch/mips/lantiq/falcon/clk.c
++++ /dev/null
+@@ -1,44 +0,0 @@
+-/*
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- *
+- * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
+- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+- */
+-
+-#include <linux/ioport.h>
+-#include <linux/export.h>
+-
+-#include <lantiq_soc.h>
+-
+-#include "devices.h"
+-
+-/* CPU0 Clock Control Register */
+-#define LTQ_SYS1_CPU0CC 0x0040
+-/* clock divider bit */
+-#define LTQ_CPU0CC_CPUDIV 0x0001
+-
+-unsigned int
+-ltq_get_io_region_clock(void)
+-{
+- return CLOCK_200M;
+-}
+-EXPORT_SYMBOL(ltq_get_io_region_clock);
+-
+-unsigned int
+-ltq_get_cpu_hz(void)
+-{
+- if (ltq_sys1_r32(LTQ_SYS1_CPU0CC) & LTQ_CPU0CC_CPUDIV)
+- return CLOCK_200M;
+- else
+- return CLOCK_400M;
+-}
+-EXPORT_SYMBOL(ltq_get_cpu_hz);
+-
+-unsigned int
+-ltq_get_fpi_hz(void)
+-{
+- return CLOCK_100M;
+-}
+-EXPORT_SYMBOL(ltq_get_fpi_hz);
+diff --git a/arch/mips/lantiq/falcon/devices.c b/arch/mips/lantiq/falcon/devices.c
+index 92ec571..e684ed4 100644
+--- a/arch/mips/lantiq/falcon/devices.c
++++ b/arch/mips/lantiq/falcon/devices.c
+@@ -134,3 +134,19 @@ falcon_register_spi_flash(struct spi_board_info *data)
+ spi_register_board_info(data, 1);
+ platform_device_register(&ltq_spi);
+ }
++
++/* i2c */
++static struct resource falcon_i2c_resources[] = {
++ MEM_RES("i2c", GPON_I2C_BASE, GPON_I2C_SIZE),
++ IRQ_RES(i2c_lb, FALCON_IRQ_I2C_LBREQ),
++ IRQ_RES(i2c_b, FALCON_IRQ_I2C_BREQ),
++ IRQ_RES(i2c_err, FALCON_IRQ_I2C_I2C_ERR),
++ IRQ_RES(i2c_p, FALCON_IRQ_I2C_I2C_P),
++};
++
++void __init
++falcon_register_i2c(void)
++{
++ platform_device_register_simple("i2c-falcon", 0,
++ falcon_i2c_resources, ARRAY_SIZE(falcon_i2c_resources));
++}
+diff --git a/arch/mips/lantiq/falcon/devices.h b/arch/mips/lantiq/falcon/devices.h
+index 5e6f720..d81edbe 100644
+--- a/arch/mips/lantiq/falcon/devices.h
++++ b/arch/mips/lantiq/falcon/devices.h
+@@ -20,5 +20,6 @@ extern void falcon_register_nand(void);
+ extern void falcon_register_gpio(void);
+ extern void falcon_register_gpio_extra(void);
+ extern void falcon_register_spi_flash(struct spi_board_info *data);
++extern void falcon_register_i2c(void);
+
+ #endif
+diff --git a/arch/mips/lantiq/falcon/mach-easy98000.c b/arch/mips/lantiq/falcon/mach-easy98000.c
+index 1a7caad..fc5720d 100644
+--- a/arch/mips/lantiq/falcon/mach-easy98000.c
++++ b/arch/mips/lantiq/falcon/mach-easy98000.c
+@@ -98,6 +98,7 @@ easy98000_init_common(void)
+ {
+ spi_register_board_info(&easy98000_spi_gpio_devices, 1);
+ platform_device_register(&easy98000_spi_gpio_device);
++ falcon_register_i2c();
+ }
+
+ static void __init
+diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
+index 3101dd5..e8d149d 100644
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -369,6 +369,16 @@ config I2C_DESIGNWARE_PCI
+ This driver can also be built as a module. If so, the module
+ will be called i2c-designware-pci.
+
++config I2C_FALCON
++ tristate "Falcon I2C interface"
++ depends on SOC_FALCON
++ help
++ If you say yes to this option, support will be included for the
++ Lantiq FALC-ON I2C core.
++
++ This driver can also be built as a module. If so, the module
++ will be called i2c-falcon.
++
+ config I2C_GPIO
+ tristate "GPIO-based bitbanging I2C"
+ depends on GENERIC_GPIO
+diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
+index fba6da6..36239c8 100644
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -37,6 +37,7 @@ obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o
+ i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o
+ obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
+ i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o
++obj-$(CONFIG_I2C_FALCON) += i2c-falcon.o
+ obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
+ obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
+ obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
+diff --git a/drivers/i2c/busses/i2c-falcon.c b/drivers/i2c/busses/i2c-falcon.c
+new file mode 100644
+index 0000000..fc4f0eb
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-falcon.c
+@@ -0,0 +1,1040 @@
++/*
++ * Lantiq FALC(tm) ON - I2C bus adapter
++ *
++ * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
++ */
++
++/*
++ * CURRENT ISSUES:
++ * - no high speed support
++ * - supports only master mode
++ * - ten bit mode is not tested (no slave devices)
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/i2c.h>
++#include <linux/clk.h>
++#include <linux/errno.h>
++#include <linux/sched.h>
++#include <linux/err.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/err.h>
++#include <linux/gpio.h>
++
++#include <lantiq_soc.h>
++
++/* I2C Identification Register */
++/* Module ID */
++#define I2C_ID_ID_MASK 0x0000FF00
++/* field offset */
++#define I2C_ID_ID_OFFSET 8
++/* Revision */
++#define I2C_ID_REV_MASK 0x000000FF
++/* field offset */
++#define I2C_ID_REV_OFFSET 0
++
++/* I2C Error Interrupt Request Source Status Register */
++/* TXF_OFL */
++#define I2C_ERR_IRQSS_TXF_OFL 0x00000008
++/* TXF_UFL */
++#define I2C_ERR_IRQSS_TXF_UFL 0x00000004
++/* RXF_OFL */
++#define I2C_ERR_IRQSS_RXF_OFL 0x00000002
++/* RXF_UFL */
++#define I2C_ERR_IRQSS_RXF_UFL 0x00000001
++
++/* I2C Bus Status Register */
++/* Bus Status */
++#define I2C_BUS_STAT_BS_MASK 0x00000003
++/* I2C Bus is free. */
++#define I2C_BUS_STAT_BS_FREE 0x00000000
++/*
++ * The device is working as master and has claimed the control
++ * on the I2C-bus (busy master).
++ */
++#define I2C_BUS_STAT_BS_BM 0x00000002
++
++/* I2C Interrupt Clear Register */
++/* Clear */
++#define I2C_ICR_BREQ_INT_CLR 0x00000008
++/* Clear */
++#define I2C_ICR_LBREQ_INT_CLR 0x00000004
++
++/* I2C RUN Control Register */
++/* Enable */
++#define I2C_RUN_CTRL_RUN_EN 0x00000001
++
++/* I2C Kernel Clock Control Register */
++/* field offset */
++#define I2C_CLC_RMC_OFFSET 8
++/* Enable */
++#define I2C_IMSC_I2C_P_INT_EN 0x00000020
++/* Enable */
++#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010
++/* Enable */
++#define I2C_IMSC_BREQ_INT_EN 0x00000008
++/* Enable */
++#define I2C_IMSC_LBREQ_INT_EN 0x00000004
++
++/* I2C Fractional Divider Configuration Register */
++/* field offset */
++#define I2C_FDIV_CFG_INC_OFFSET 16
++/* field offset */
++#define I2C_FDIV_CFG_DEC_OFFSET 0
++
++/* I2C Fractional Divider (highspeed mode) Configuration Register */
++/* field offset */
++#define I2C_FDIV_HIGH_CFG_INC_OFFSET 16
++/* field offset */
++#define I2C_FDIV_HIGH_CFG_DEC_OFFSET 0
++
++/* I2C Address Register */
++/* Enable */
++#define I2C_ADDR_CFG_SOPE_EN 0x00200000
++/* Enable */
++#define I2C_ADDR_CFG_SONA_EN 0x00100000
++/* Enable */
++#define I2C_ADDR_CFG_MnS_EN 0x00080000
++
++/* I2C Protocol Interrupt Request Source Status Register */
++/* RX */
++#define I2C_P_IRQSS_RX 0x00000040
++/* TX_END */
++#define I2C_P_IRQSS_TX_END 0x00000020
++/* NACK */
++#define I2C_P_IRQSS_NACK 0x00000010
++/* AL */
++#define I2C_P_IRQSS_AL 0x00000008
++
++/* I2C Raw Interrupt Status Register */
++/* Read: Interrupt occurred. */
++#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020
++/* Read: Interrupt occurred. */
++#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010
++
++/* I2C End Data Control Register */
++/*
++ * Set End of Transmission - Note: Do not write '1' to this bit when bus is
++ * free. This will cause an abort after the first byte when a new transfer
++ * is started.
++ */
++#define I2C_ENDD_CTRL_SETEND 0x00000002
++/* TX FIFO Flow Control */
++#define I2C_FIFO_CFG_TXFC 0x00020000
++/* RX FIFO Flow Control */
++#define I2C_FIFO_CFG_RXFC 0x00010000
++/* Word aligned (character alignment of four characters) */
++#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000
++/* Word aligned (character alignment of four characters) */
++#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200
++/* 1 word */
++#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000
++/* 1 word */
++#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000
++
++
++/* I2C register structure */
++struct gpon_reg_i2c {
++ /* I2C Kernel Clock Control Register */
++ unsigned int clc; /* 0x00000000 */
++ /* Reserved */
++ unsigned int res_0; /* 0x00000004 */
++ /* I2C Identification Register */
++ unsigned int id; /* 0x00000008 */
++ /* Reserved */
++ unsigned int res_1; /* 0x0000000C */
++ /*
++ * I2C RUN Control Register - This register enables and disables the I2C
++ * peripheral. Before enabling, the I2C has to be configured properly.
++ * After enabling no configuration is possible
++ */
++ unsigned int run_ctrl; /* 0x00000010 */
++ /*
++ * I2C End Data Control Register - This register is used to either turn
++ * around the data transmission direction or to address another slave
++ * without sending a stop condition. Also the software can stop the
++ * slave-transmitter by sending a not-accolade when working as
++ * master-receiver or even stop data transmission immediately when
++ * operating as master-transmitter. The writing to the bits of this
++ * control register is only effective when in MASTER RECEIVES BYTES,
++ * MASTER TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state
++ */
++ unsigned int endd_ctrl; /* 0x00000014 */
++ /*
++ * I2C Fractional Divider Configuration Register - These register is
++ * used to program the fractional divider of the I2C bus. Before the
++ * peripheral is switched on by setting the RUN-bit the two (fixed)
++ * values for the two operating frequencies are programmed into these
++ * (configuration) registers. The Register FDIV_HIGH_CFG has the same
++ * layout as I2C_FDIV_CFG.
++ */
++ unsigned int fdiv_cfg; /* 0x00000018 */
++ /*
++ * I2C Fractional Divider (highspeed mode) Configuration Register
++ * These register is used to program the fractional divider of the I2C
++ * bus. Before the peripheral is switched on by setting the RUN-bit the
++ * two (fixed) values for the two operating frequencies are programmed
++ * into these (configuration) registers. The Register FDIV_CFG has the
++ * same layout as I2C_FDIV_CFG.
++ */
++ unsigned int fdiv_high_cfg; /* 0x0000001C */
++ /* I2C Address Configuration Register */
++ unsigned int addr_cfg; /* 0x00000020 */
++ /*
++ * I2C Bus Status Register - This register gives a status information
++ * of the I2C. This additional information can be used by the software
++ * to start proper actions.
++ */
++ unsigned int bus_stat; /* 0x00000024 */
++ /* I2C FIFO Configuration Register */
++ unsigned int fifo_cfg; /* 0x00000028 */
++ /* I2C Maximum Received Packet Size Register */
++ unsigned int mrps_ctrl; /* 0x0000002C */
++ /* I2C Received Packet Size Status Register */
++ unsigned int rps_stat; /* 0x00000030 */
++ /* I2C Transmit Packet Size Register */
++ unsigned int tps_ctrl; /* 0x00000034 */
++ /* I2C Filled FIFO Stages Status Register */
++ unsigned int ffs_stat; /* 0x00000038 */
++ /* Reserved */
++ unsigned int res_2; /* 0x0000003C */
++ /* I2C Timing Configuration Register */
++ unsigned int tim_cfg; /* 0x00000040 */
++ /* Reserved */
++ unsigned int res_3[7]; /* 0x00000044 */
++ /* I2C Error Interrupt Request Source Mask Register */
++ unsigned int err_irqsm; /* 0x00000060 */
++ /* I2C Error Interrupt Request Source Status Register */
++ unsigned int err_irqss; /* 0x00000064 */
++ /* I2C Error Interrupt Request Source Clear Register */
++ unsigned int err_irqsc; /* 0x00000068 */
++ /* Reserved */
++ unsigned int res_4; /* 0x0000006C */
++ /* I2C Protocol Interrupt Request Source Mask Register */
++ unsigned int p_irqsm; /* 0x00000070 */
++ /* I2C Protocol Interrupt Request Source Status Register */
++ unsigned int p_irqss; /* 0x00000074 */
++ /* I2C Protocol Interrupt Request Source Clear Register */
++ unsigned int p_irqsc; /* 0x00000078 */
++ /* Reserved */
++ unsigned int res_5; /* 0x0000007C */
++ /* I2C Raw Interrupt Status Register */
++ unsigned int ris; /* 0x00000080 */
++ /* I2C Interrupt Mask Control Register */
++ unsigned int imsc; /* 0x00000084 */
++ /* I2C Masked Interrupt Status Register */
++ unsigned int mis; /* 0x00000088 */
++ /* I2C Interrupt Clear Register */
++ unsigned int icr; /* 0x0000008C */
++ /* I2C Interrupt Set Register */
++ unsigned int isr; /* 0x00000090 */
++ /* I2C DMA Enable Register */
++ unsigned int dmae; /* 0x00000094 */
++ /* Reserved */
++ unsigned int res_6[8154]; /* 0x00000098 */
++ /* I2C Transmit Data Register */
++ unsigned int txd; /* 0x00008000 */
++ /* Reserved */
++ unsigned int res_7[4095]; /* 0x00008004 */
++ /* I2C Receive Data Register */
++ unsigned int rxd; /* 0x0000C000 */
++ /* Reserved */
++ unsigned int res_8[4095]; /* 0x0000C004 */
++};
++
++/* mapping for access macros */
++#define i2c ((struct gpon_reg_i2c *)priv->membase)
++#define reg_r32(reg) __raw_readl(reg)
++#define reg_w32(val, reg) __raw_writel(val, reg)
++#define reg_w32_mask(clear, set, reg) \
++ reg_w32((reg_r32(reg) & ~(clear)) | (set), reg)
++#define reg_r32_table(reg, idx) reg_r32(&((uint32_t *)&reg)[idx])
++#define reg_w32_table(val, reg, idx) reg_w32(val, &((uint32_t *)&reg)[idx])
++
++#define i2c_r32(reg) reg_r32(&i2c->reg)
++#define i2c_w32(val, reg) reg_w32(val, &i2c->reg)
++#define i2c_w32_mask(clear, set, reg) reg_w32_mask(clear, set, &i2c->reg)
++
++#define DRV_NAME "i2c-falcon"
++#define DRV_VERSION "1.01"
++
++#define FALCON_I2C_BUSY_TIMEOUT 20 /* ms */
++
++#ifdef DEBUG
++#define FALCON_I2C_XFER_TIMEOUT (25 * HZ)
++#else
++#define FALCON_I2C_XFER_TIMEOUT HZ
++#endif
++#if defined(DEBUG) && 0
++#define PRINTK(arg...) pr_info(arg)
++#else
++#define PRINTK(arg...) do {} while (0)
++#endif
++
++#define FALCON_I2C_IMSC_DEFAULT_MASK (I2C_IMSC_I2C_P_INT_EN | \
++ I2C_IMSC_I2C_ERR_INT_EN)
++
++#define FALCON_I2C_ARB_LOST (1 << 0)
++#define FALCON_I2C_NACK (1 << 1)
++#define FALCON_I2C_RX_UFL (1 << 2)
++#define FALCON_I2C_RX_OFL (1 << 3)
++#define FALCON_I2C_TX_UFL (1 << 4)
++#define FALCON_I2C_TX_OFL (1 << 5)
++
++struct falcon_i2c {
++ struct mutex mutex;
++
++ enum {
++ FALCON_I2C_MODE_100 = 1,
++ FALCON_I2C_MODE_400 = 2,
++ FALCON_I2C_MODE_3400 = 3
++ } mode; /* current speed mode */
++
++ struct clk *clk; /* clock input for i2c hardware block */
++ struct gpon_reg_i2c __iomem *membase; /* base of mapped registers */
++ int irq_lb, irq_b, irq_err, irq_p; /* last burst, burst, error,
++ protocol IRQs */
++
++ struct i2c_adapter adap;
++ struct device *dev;
++
++ struct completion cmd_complete;
++
++ /* message transfer data */
++ /* current message */
++ struct i2c_msg *current_msg;
++ /* number of messages to handle */
++ int msgs_num;
++ /* current buffer */
++ u8 *msg_buf;
++ /* remaining length of current buffer */
++ u32 msg_buf_len;
++ /* error status of the current transfer */
++ int msg_err;
++
++ /* master status codes */
++ enum {
++ STATUS_IDLE,
++ STATUS_ADDR, /* address phase */
++ STATUS_WRITE,
++ STATUS_READ,
++ STATUS_READ_END,
++ STATUS_STOP
++ } status;
++};
++
++static irqreturn_t falcon_i2c_isr(int irq, void *dev_id);
++
++static inline void enable_burst_irq(struct falcon_i2c *priv)
++{
++ i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc);
++}
++static inline void disable_burst_irq(struct falcon_i2c *priv)
++{
++ i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc);
++}
++
++static void prepare_msg_send_addr(struct falcon_i2c *priv)
++{
++ struct i2c_msg *msg = priv->current_msg;
++ int rd = !!(msg->flags & I2C_M_RD);
++ u16 addr = msg->addr;
++
++ /* new i2c_msg */
++ priv->msg_buf = msg->buf;
++ priv->msg_buf_len = msg->len;
++ if (rd)
++ priv->status = STATUS_READ;
++ else
++ priv->status = STATUS_WRITE;
++
++ /* send slave address */
++ if (msg->flags & I2C_M_TEN) {
++ i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd);
++ i2c_w32(addr & 0xff, txd);
++ } else
++ i2c_w32((addr & 0x7f) << 1 | rd, txd);
++}
++
++static void set_tx_len(struct falcon_i2c *priv)
++{
++ struct i2c_msg *msg = priv->current_msg;
++ int len = (msg->flags & I2C_M_TEN) ? 2 : 1;
++
++ PRINTK("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? ('R') : ('T'));
++
++ priv->status = STATUS_ADDR;
++
++ if (!(msg->flags & I2C_M_RD)) {
++ len += msg->len;
++ } else {
++ /* set maximum received packet size (before rx int!) */
++ i2c_w32(msg->len, mrps_ctrl);
++ }
++ i2c_w32(len, tps_ctrl);
++ enable_burst_irq(priv);
++}
++
++static int falcon_i2c_hw_init(struct i2c_adapter *adap)
++{
++ struct falcon_i2c *priv = i2c_get_adapdata(adap);
++
++ /* disable bus */
++ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
++
++#ifndef DEBUG
++ /* set normal operation clock divider */
++ i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc);
++#else
++ /* for debugging a higher divider value! */
++ i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc);
++#endif
++
++ /* set frequency */
++ if (priv->mode == FALCON_I2C_MODE_100) {
++ dev_dbg(priv->dev, "set standard mode (100 kHz)\n");
++ i2c_w32(0, fdiv_high_cfg);
++ i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET) |
++ (499 << I2C_FDIV_CFG_DEC_OFFSET),
++ fdiv_cfg);
++ } else if (priv->mode == FALCON_I2C_MODE_400) {
++ dev_dbg(priv->dev, "set fast mode (400 kHz)\n");
++ i2c_w32(0, fdiv_high_cfg);
++ i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET) |
++ (124 << I2C_FDIV_CFG_DEC_OFFSET),
++ fdiv_cfg);
++ } else if (priv->mode == FALCON_I2C_MODE_3400) {
++ dev_dbg(priv->dev, "set high mode (3.4 MHz)\n");
++ i2c_w32(0, fdiv_cfg);
++ /* TODO recalculate value for 100MHz input */
++ i2c_w32((41 << I2C_FDIV_HIGH_CFG_INC_OFFSET) |
++ (152 << I2C_FDIV_HIGH_CFG_DEC_OFFSET),
++ fdiv_high_cfg);
++ } else {
++ dev_warn(priv->dev, "unknown mode\n");
++ return -ENODEV;
++ }
++
++ /* configure fifo */
++ i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */
++ I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */
++ I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */
++ I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */
++ I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */
++ I2C_FIFO_CFG_RXBS_RXBS0, /* rx fifo burst size is 1 word */
++ fifo_cfg);
++
++ /* configure address */
++ i2c_w32(I2C_ADDR_CFG_SOPE_EN | /* generate stop when no more data
++ in the fifo */
++ I2C_ADDR_CFG_SONA_EN | /* generate stop when NA received */
++ I2C_ADDR_CFG_MnS_EN | /* we are master device */
++ 0, /* our slave address (not used!) */
++ addr_cfg);
++
++ /* enable bus */
++ i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl);
++
++ return 0;
++}
++
++static int falcon_i2c_wait_bus_not_busy(struct falcon_i2c *priv)
++{
++ int timeout = FALCON_I2C_BUSY_TIMEOUT;
++
++ while ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK)
++ != I2C_BUS_STAT_BS_FREE) {
++ if (timeout <= 0) {
++ dev_warn(priv->dev, "timeout waiting for bus ready\n");
++ return -ETIMEDOUT;
++ }
++ timeout--;
++ mdelay(1);
++ }
++
++ return 0;
++}
++
++static void falcon_i2c_tx(struct falcon_i2c *priv, int last)
++{
++ if (priv->msg_buf_len && priv->msg_buf) {
++ i2c_w32(*priv->msg_buf, txd);
++
++ if (--priv->msg_buf_len)
++ priv->msg_buf++;
++ else
++ priv->msg_buf = NULL;
++ } else
++ last = 1;
++
++ if (last)
++ disable_burst_irq(priv);
++}
++
++static void falcon_i2c_rx(struct falcon_i2c *priv, int last)
++{
++ u32 fifo_stat, timeout;
++ if (priv->msg_buf_len && priv->msg_buf) {
++ timeout = 5000000;
++ do {
++ fifo_stat = i2c_r32(ffs_stat);
++ } while (!fifo_stat && --timeout);
++ if (!timeout) {
++ last = 1;
++ PRINTK("\nrx timeout\n");
++ goto err;
++ }
++ while (fifo_stat) {
++ *priv->msg_buf = i2c_r32(rxd);
++ if (--priv->msg_buf_len)
++ priv->msg_buf++;
++ else {
++ priv->msg_buf = NULL;
++ last = 1;
++ break;
++ }
++ #if 0
++ fifo_stat = i2c_r32(ffs_stat);
++ #else
++ /* do not read more than burst size, otherwise no "last
++ burst" is generated and the transaction is blocked! */
++ fifo_stat = 0;
++ #endif
++ }
++ } else {
++ last = 1;
++ }
++err:
++ if (last) {
++ disable_burst_irq(priv);
++
++ if (priv->status == STATUS_READ_END) {
++ /* do the STATUS_STOP and complete() here, as sometimes
++ the tx_end is already seen before this is finished */
++ priv->status = STATUS_STOP;
++ complete(&priv->cmd_complete);
++ } else {
++ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
++ priv->status = STATUS_READ_END;
++ }
++ }
++}
++
++static void falcon_i2c_xfer_init(struct falcon_i2c *priv)
++{
++ /* enable interrupts */
++ i2c_w32(FALCON_I2C_IMSC_DEFAULT_MASK, imsc);
++
++ /* trigger transfer of first msg */
++ set_tx_len(priv);
++}
++
++static void dump_msgs(struct i2c_msg msgs[], int num, int rx)
++{
++#if defined(DEBUG)
++ int i, j;
++ pr_info("Messages %d %s\n", num, rx ? "out" : "in");
++ for (i = 0; i < num; i++) {
++ pr_info("%2d %cX Msg(%d) addr=0x%X: ", i,
++ (msgs[i].flags & I2C_M_RD) ? ('R') : ('T'),
++ msgs[i].len, msgs[i].addr);
++ if (!(msgs[i].flags & I2C_M_RD) || rx) {
++ for (j = 0; j < msgs[i].len; j++)
++ printk("%02X ", msgs[i].buf[j]);
++ }
++ printk("\n");
++ }
++#endif
++}
++
++static void falcon_i2c_release_bus(struct falcon_i2c *priv)
++{
++ if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM)
++ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
++}
++
++static int falcon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
++ int num)
++{
++ struct falcon_i2c *priv = i2c_get_adapdata(adap);
++ int ret;
++
++ dev_dbg(priv->dev, "xfer %u messages\n", num);
++ dump_msgs(msgs, num, 0);
++
++ mutex_lock(&priv->mutex);
++
++ INIT_COMPLETION(priv->cmd_complete);
++ priv->current_msg = msgs;
++ priv->msgs_num = num;
++ priv->msg_err = 0;
++ priv->status = STATUS_IDLE;
++
++ /* wait for the bus to become ready */
++ ret = falcon_i2c_wait_bus_not_busy(priv);
++ if (ret)
++ goto done;
++
++ while (priv->msgs_num) {
++ /* start the transfers */
++ falcon_i2c_xfer_init(priv);
++
++ /* wait for transfers to complete */
++ ret = wait_for_completion_interruptible_timeout(
++ &priv->cmd_complete, FALCON_I2C_XFER_TIMEOUT);
++ if (ret == 0) {
++ dev_err(priv->dev, "controller timed out\n");
++ falcon_i2c_hw_init(adap);
++ ret = -ETIMEDOUT;
++ goto done;
++ } else if (ret < 0)
++ goto done;
++
++ if (priv->msg_err) {
++ if (priv->msg_err & FALCON_I2C_NACK)
++ ret = -ENXIO;
++ else
++ ret = -EREMOTEIO;
++ goto done;
++ }
++ if (--priv->msgs_num)
++ priv->current_msg++;
++ }
++ /* no error? */
++ ret = num;
++
++done:
++ falcon_i2c_release_bus(priv);
++
++ mutex_unlock(&priv->mutex);
++
++ if (ret >= 0)
++ dump_msgs(msgs, num, 1);
++
++ PRINTK("XFER ret %d\n", ret);
++ return ret;
++}
++
++static irqreturn_t falcon_i2c_isr_burst(int irq, void *dev_id)
++{
++ struct falcon_i2c *priv = dev_id;
++ struct i2c_msg *msg = priv->current_msg;
++ int last = (irq == priv->irq_lb);
++
++ if (last)
++ PRINTK("LB ");
++ else
++ PRINTK("B ");
++
++ if (msg->flags & I2C_M_RD) {
++ switch (priv->status) {
++ case STATUS_ADDR:
++ PRINTK("X");
++ prepare_msg_send_addr(priv);
++ disable_burst_irq(priv);
++ break;
++ case STATUS_READ:
++ case STATUS_READ_END:
++ PRINTK("R");
++ falcon_i2c_rx(priv, last);
++ break;
++ default:
++ disable_burst_irq(priv);
++ PRINTK("Status R %d\n", priv->status);
++ break;
++ }
++ } else {
++ switch (priv->status) {
++ case STATUS_ADDR:
++ PRINTK("x");
++ prepare_msg_send_addr(priv);
++ break;
++ case STATUS_WRITE:
++ PRINTK("w");
++ falcon_i2c_tx(priv, last);
++ break;
++ default:
++ disable_burst_irq(priv);
++ PRINTK("Status W %d\n", priv->status);
++ break;
++ }
++ }
++
++ i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr);
++ return IRQ_HANDLED;
++}
++
++static void falcon_i2c_isr_prot(struct falcon_i2c *priv)
++{
++ u32 i_pro = i2c_r32(p_irqss);
++
++ PRINTK("i2c-p");
++
++ /* not acknowledge */
++ if (i_pro & I2C_P_IRQSS_NACK) {
++ priv->msg_err |= FALCON_I2C_NACK;
++ PRINTK(" nack");
++ }
++
++ /* arbitration lost */
++ if (i_pro & I2C_P_IRQSS_AL) {
++ priv->msg_err |= FALCON_I2C_ARB_LOST;
++ PRINTK(" arb-lost");
++ }
++ /* tx -> rx switch */
++ if (i_pro & I2C_P_IRQSS_RX)
++ PRINTK(" rx");
++
++ /* tx end */
++ if (i_pro & I2C_P_IRQSS_TX_END)
++ PRINTK(" txend");
++ PRINTK("\n");
++
++ if (!priv->msg_err) {
++ /* tx -> rx switch */
++ if (i_pro & I2C_P_IRQSS_RX) {
++ priv->status = STATUS_READ;
++ enable_burst_irq(priv);
++ }
++ if (i_pro & I2C_P_IRQSS_TX_END) {
++ if (priv->status == STATUS_READ)
++ priv->status = STATUS_READ_END;
++ else {
++ disable_burst_irq(priv);
++ priv->status = STATUS_STOP;
++ }
++ }
++ }
++
++ i2c_w32(i_pro, p_irqsc);
++}
++
++static irqreturn_t falcon_i2c_isr(int irq, void *dev_id)
++{
++ u32 i_raw, i_err = 0;
++ struct falcon_i2c *priv = dev_id;
++
++ i_raw = i2c_r32(mis);
++ PRINTK("i_raw 0x%08X\n", i_raw);
++
++ /* error interrupt */
++ if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) {
++ i_err = i2c_r32(err_irqss);
++ PRINTK("i_err 0x%08X bus_stat 0x%04X\n",
++ i_err, i2c_r32(bus_stat));
++
++ /* tx fifo overflow (8) */
++ if (i_err & I2C_ERR_IRQSS_TXF_OFL)
++ priv->msg_err |= FALCON_I2C_TX_OFL;
++
++ /* tx fifo underflow (4) */
++ if (i_err & I2C_ERR_IRQSS_TXF_UFL)
++ priv->msg_err |= FALCON_I2C_TX_UFL;
++
++ /* rx fifo overflow (2) */
++ if (i_err & I2C_ERR_IRQSS_RXF_OFL)
++ priv->msg_err |= FALCON_I2C_RX_OFL;
++
++ /* rx fifo underflow (1) */
++ if (i_err & I2C_ERR_IRQSS_RXF_UFL)
++ priv->msg_err |= FALCON_I2C_RX_UFL;
++
++ i2c_w32(i_err, err_irqsc);
++ }
++
++ /* protocol interrupt */
++ if (i_raw & I2C_RIS_I2C_P_INT_INTOCC)
++ falcon_i2c_isr_prot(priv);
++
++ if ((priv->msg_err) || (priv->status == STATUS_STOP))
++ complete(&priv->cmd_complete);
++
++ return IRQ_HANDLED;
++}
++
++static u32 falcon_i2c_functionality(struct i2c_adapter *adap)
++{
++ return I2C_FUNC_I2C |
++ I2C_FUNC_10BIT_ADDR |
++ I2C_FUNC_SMBUS_EMUL;
++}
++
++static struct i2c_algorithm falcon_i2c_algorithm = {
++ .master_xfer = falcon_i2c_xfer,
++ .functionality = falcon_i2c_functionality,
++};
++
++static int __devinit falcon_i2c_probe(struct platform_device *pdev)
++{
++ int ret = 0;
++ struct falcon_i2c *priv;
++ struct i2c_adapter *adap;
++ struct resource *mmres, *ioarea,
++ *irqres_lb, *irqres_b, *irqres_err, *irqres_p;
++ struct clk *clk;
++
++ dev_dbg(&pdev->dev, "probing\n");
++
++ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ irqres_lb = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
++ "i2c_lb");
++ irqres_b = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_b");
++ irqres_err = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
++ "i2c_err");
++ irqres_p = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_p");
++
++ if (!mmres || !irqres_lb || !irqres_b || !irqres_err || !irqres_p) {
++ dev_err(&pdev->dev, "no resources\n");
++ return -ENODEV;
++ }
++
++ clk = clk_get_fpi();
++ if (IS_ERR(clk)) {
++ dev_err(&pdev->dev, "failed to get fpi clk\n");
++ return -ENOENT;
++ }
++
++ if (clk_get_rate(clk) != 100000000) {
++ dev_err(&pdev->dev, "input clock is not 100MHz\n");
++ return -ENOENT;
++ }
++ clk = clk_get(&pdev->dev, NULL);
++ if (IS_ERR(clk)) {
++ dev_err(&pdev->dev, "failed to get i2c clk\n");
++ return -ENOENT;
++ }
++
++ /* allocate private data */
++ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
++ if (!priv) {
++ dev_err(&pdev->dev, "can't allocate private data\n");
++ return -ENOMEM;
++ }
++
++ adap = &priv->adap;
++ i2c_set_adapdata(adap, priv);
++ adap->owner = THIS_MODULE;
++ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
++ strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name));
++ adap->algo = &falcon_i2c_algorithm;
++
++ priv->mode = FALCON_I2C_MODE_100;
++ priv->clk = clk;
++ priv->dev = &pdev->dev;
++
++ init_completion(&priv->cmd_complete);
++ mutex_init(&priv->mutex);
++
++ if (ltq_gpio_request(&pdev->dev, 107, 0, 0, DRV_NAME":sda") ||
++ ltq_gpio_request(&pdev->dev, 108, 0, 0, DRV_NAME":scl"))
++ {
++ dev_err(&pdev->dev, "I2C gpios not available\n");
++ ret = -ENXIO;
++ goto err_free_priv;
++ }
++
++ ioarea = request_mem_region(mmres->start, resource_size(mmres),
++ pdev->name);
++
++ if (ioarea == NULL) {
++ dev_err(&pdev->dev, "I2C region already claimed\n");
++ ret = -ENXIO;
++ goto err_free_gpio;
++ }
++
++ /* map memory */
++ priv->membase = ioremap_nocache(mmres->start & ~KSEG1,
++ resource_size(mmres));
++ if (priv->membase == NULL) {
++ ret = -ENOMEM;
++ goto err_release_region;
++ }
++
++ priv->irq_lb = irqres_lb->start;
++ ret = request_irq(priv->irq_lb, falcon_i2c_isr_burst, IRQF_DISABLED,
++ irqres_lb->name, priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get last burst IRQ %d\n",
++ irqres_lb->start);
++ ret = -ENODEV;
++ goto err_unmap_mem;
++ }
++
++ priv->irq_b = irqres_b->start;
++ ret = request_irq(priv->irq_b, falcon_i2c_isr_burst, IRQF_DISABLED,
++ irqres_b->name, priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get burst IRQ %d\n",
++ irqres_b->start);
++ ret = -ENODEV;
++ goto err_free_lb_irq;
++ }
++
++ priv->irq_err = irqres_err->start;
++ ret = request_irq(priv->irq_err, falcon_i2c_isr, IRQF_DISABLED,
++ irqres_err->name, priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get error IRQ %d\n",
++ irqres_err->start);
++ ret = -ENODEV;
++ goto err_free_b_irq;
++ }
++
++ priv->irq_p = irqres_p->start;
++ ret = request_irq(priv->irq_p, falcon_i2c_isr, IRQF_DISABLED,
++ irqres_p->name, priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get protocol IRQ %d\n",
++ irqres_p->start);
++ ret = -ENODEV;
++ goto err_free_err_irq;
++ }
++
++ dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase);
++ dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres_lb->start,
++ irqres_b->start, irqres_err->start, irqres_p->start);
++
++ /* add our adapter to the i2c stack */
++ ret = i2c_add_numbered_adapter(adap);
++ if (ret) {
++ dev_err(&pdev->dev, "can't register I2C adapter\n");
++ goto err_free_p_irq;
++ }
++
++ platform_set_drvdata(pdev, priv);
++ i2c_set_adapdata(adap, priv);
++
++ /* print module version information */
++ dev_dbg(&pdev->dev, "module id=%u revision=%u\n",
++ (i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET,
++ (i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET);
++
++ /* initialize HW */
++ ret = falcon_i2c_hw_init(adap);
++ if (ret) {
++ dev_err(&pdev->dev, "can't configure adapter\n");
++ goto err_remove_adapter;
++ }
++
++ dev_info(&pdev->dev, "version %s\n", DRV_VERSION);
++
++ return 0;
++
++err_remove_adapter:
++ i2c_del_adapter(adap);
++ platform_set_drvdata(pdev, NULL);
++
++err_free_p_irq:
++ free_irq(priv->irq_p, priv);
++
++err_free_err_irq:
++ free_irq(priv->irq_err, priv);
++
++err_free_b_irq:
++ free_irq(priv->irq_b, priv);
++
++err_free_lb_irq:
++ free_irq(priv->irq_lb, priv);
++
++err_unmap_mem:
++ iounmap(priv->membase);
++
++err_release_region:
++ release_mem_region(mmres->start, resource_size(mmres));
++
++err_free_gpio:
++ gpio_free(108);
++ gpio_free(107);
++
++err_free_priv:
++ kfree(priv);
++
++ return ret;
++}
++
++static int __devexit falcon_i2c_remove(struct platform_device *pdev)
++{
++ struct falcon_i2c *priv = platform_get_drvdata(pdev);
++ struct resource *mmres;
++
++ /* disable bus */
++ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
++
++ /* remove driver */
++ platform_set_drvdata(pdev, NULL);
++ i2c_del_adapter(&priv->adap);
++
++ free_irq(priv->irq_lb, priv);
++ free_irq(priv->irq_b, priv);
++ free_irq(priv->irq_err, priv);
++ free_irq(priv->irq_p, priv);
++
++ iounmap(priv->membase);
++
++ gpio_free(108);
++ gpio_free(107);
++
++ kfree(priv);
++
++ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ release_mem_region(mmres->start, resource_size(mmres));
++
++ dev_dbg(&pdev->dev, "removed\n");
++
++ return 0;
++}
++
++static struct platform_driver falcon_i2c_driver = {
++ .probe = falcon_i2c_probe,
++ .remove = __devexit_p(falcon_i2c_remove),
++ .driver = {
++ .name = DRV_NAME,
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init falcon_i2c_init(void)
++{
++ int ret;
++
++ ret = platform_driver_register(&falcon_i2c_driver);
++
++ if (ret)
++ pr_debug(DRV_NAME ": can't register platform driver\n");
++
++ return ret;
++}
++
++static void __exit falcon_i2c_exit(void)
++{
++ platform_driver_unregister(&falcon_i2c_driver);
++}
++
++module_init(falcon_i2c_init);
++module_exit(falcon_i2c_exit);
++
++MODULE_DESCRIPTION("Lantiq FALC(tm) ON - I2C bus adapter");
++MODULE_ALIAS("platform:" DRV_NAME);
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
+--
+1.7.9.1
+
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 01:54:43 +0000