1 files changed, 189 insertions, 0 deletions
diff --git a/target/linux/lantiq/dts/P2601HNFX.dts b/target/linux/lantiq/dts/P2601HNFX.dts
new file mode 100644
index 0000000000..905f89474d
--- /dev/null
+++ b/target/linux/lantiq/dts/P2601HNFX.dts
@@ -0,0 +1,189 @@
+/dts-v1/;
+
+/include/ "ar9.dtsi"
+
+/ {
+	model = "P2601HNFX - ZyXEL P-2601HN-Fx";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		localbus@0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x0 0x3ffffff
+				  1 0 0x4000000 0x4000010>;
+			compatible = "lantiq,localbus", "simple-bus";
+
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x40000>;
+					read-only;
+				};
+
+				partition@40000 {
+					label = "uboot_env";
+					reg = <0x40000 0x20000>;
+					read-only;
+				};
+
+				partition@60000 {
+					label = "firmware";
+					reg = <0x60000 0xfa0000>;
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			compatible = "lantiq,pinctrl-xr9";
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xE100B10 0xA0>;
+
+			state_default: pinmux {
+				stp {
+					lantiq,groups = "stp";
+					lantiq,function = "stp";
+				};
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+				};
+				pci {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+				};
+				conf_out {
+					lantiq,pins = "io4", "io5", "io6";
+					lantiq,open-drain;
+					lantiq,pull = <0>;
+				};
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 9 0>;
+		};
+
+		stp: stp@E100BB0 {
+			#gpio-cells = <2>;
+			compatible = "lantiq,gpio-stp-xway";
+			gpio-controller;
+			reg = <0xE100BB0 0x40>;
+
+			lantiq,shadow = <0xfff>;
+			lantiq,groups = <0x3>;
+		};
+
+		pci@E105400 {
+			lantiq,bus-clock = <33333333>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <0x7000 0 0 1 &icu0 29 1>;
+			gpios-reset = <&gpio 21 0>;
+			req-mask = <0x1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 53 1>;
+			linux,code = <0x198>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 54 1>;
+			linux,code = <0x211>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "power";
+			gpios = <&stp 11 1>;
+			default-state = "on";
+		};
+		power2 {
+			label = "power2";
+			gpios = <&gpio 29 1>;
+		};
+		online {
+			label = "online";
+			gpios = <&stp 13 1>;
+		};
+		online2 {
+			label = "online2";
+			gpios = <&stp 12 1>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&stp 14 1>;
+		};
+		phone {
+			label = "phone";
+			gpios = <&stp 9 1>;
+		};
+		phone2 {
+			label = "phone2";
+			gpios = <&stp 8 1>;
+		};
+		wifi {
+			label = "wifi";
+			gpios = <&stp 15 1>;
+		};
+		wifi2 {
+			label = "wifi2";
+			gpios = <&stp 10 1>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		switch {
+			gpio-export,name = "switch";
+			gpio-export,output = <1>;
+			gpios = <&gpio 50 0>;
+		};
+		usb {
+			gpio-export,name = "wifi";
+			gpio-export,output = <1>;
+			gpios = <&gpio 9 0>;
+		};
+	};
+};