summaryrefslogtreecommitdiff
path: root/target/linux/ixp4xx/patches
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ixp4xx/patches')
-rw-r--r--target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch551
-rw-r--r--target/linux/ixp4xx/patches/070-ixp4xx_freq_fixup.patch131
-rw-r--r--target/linux/ixp4xx/patches/080-trivial_nslu2_nas100d_cleanup.patch196
-rw-r--r--target/linux/ixp4xx/patches/100-npe_driver.patch4881
-rw-r--r--target/linux/ixp4xx/patches/110-ixp4xx_net_driver_fix_mac_handling.patch17
-rw-r--r--target/linux/ixp4xx/patches/139-ixp4xx_net_driver_mtd_load_fw.patch392
-rw-r--r--target/linux/ixp4xx/patches/140-ixp4xx_net_driver_no_phy.patch73
-rw-r--r--target/linux/ixp4xx/patches/141-nslu2_setup_mac.patch42
-rw-r--r--target/linux/ixp4xx/patches/142-nas100d_setup_mac.patch41
-rw-r--r--target/linux/ixp4xx/patches/143-nslu2_mtd_microcode.patch35
-rw-r--r--target/linux/ixp4xx/patches/144-nas100d_mtd_microcode.patch34
-rw-r--r--target/linux/ixp4xx/patches/152-nas100d_mtd_load_mac.patch56
-rw-r--r--target/linux/ixp4xx/patches/153-nslu2_mtd_load_mac.patch56
-rw-r--r--target/linux/ixp4xx/patches/160-nas100d_artop_temp_fix.patch49
-rw-r--r--target/linux/ixp4xx/patches/178-via_velocity_bigendian.patch927
-rw-r--r--target/linux/ixp4xx/patches/185-nslu2_rtc_fixup.patch54
-rw-r--r--target/linux/ixp4xx/patches/186-nas100d_rtc_fixup.patch55
-rw-r--r--target/linux/ixp4xx/patches/187-dsmg600_rtc_fixup.patch57
-rw-r--r--target/linux/ixp4xx/patches/200-gateway_7001.patch250
-rw-r--r--target/linux/ixp4xx/patches/210-gateway_7001_setup_mac.patch62
-rw-r--r--target/linux/ixp4xx/patches/212-gateway_7001_mtd_microcode.patch67
-rw-r--r--target/linux/ixp4xx/patches/300-wg302v2.patch231
-rw-r--r--target/linux/ixp4xx/patches/310-wg302v2_setup_mac.patch37
-rw-r--r--target/linux/ixp4xx/patches/400-pronghorn_metro.patch251
-rw-r--r--target/linux/ixp4xx/patches/410-pronghorn_metro_setup_mac.patch61
-rw-r--r--target/linux/ixp4xx/patches/420-pronghorn_metro_mtd_microcode.patch55
-rw-r--r--target/linux/ixp4xx/patches/430-pronghorn_metro_cf.patch57
-rw-r--r--target/linux/ixp4xx/patches/500-compex.patch184
-rw-r--r--target/linux/ixp4xx/patches/510-compex_setup_mac.patch62
-rw-r--r--target/linux/ixp4xx/patches/520-compex_mtd_microcode.patch55
-rw-r--r--target/linux/ixp4xx/patches/600-wrt300nv2.patch229
-rw-r--r--target/linux/ixp4xx/patches/610-wrt300nv2_setup_mac.patch62
-rw-r--r--target/linux/ixp4xx/patches/720-avila_setup_mac.patch70
-rw-r--r--target/linux/ixp4xx/patches/740-avila_loft_mac_platform.patch50
-rw-r--r--target/linux/ixp4xx/patches/750-avila_mtd_microcode.patch28
-rw-r--r--target/linux/ixp4xx/patches/800-eeprom_new_notifier.patch201
-rw-r--r--target/linux/ixp4xx/patches/900-no_loader_workaround.patch19
-rw-r--r--target/linux/ixp4xx/patches/996-fsg3_support.patch429
38 files changed, 10107 insertions, 0 deletions
diff --git a/target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch b/target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch
new file mode 100644
index 0000000000..b214ef2b5f
--- /dev/null
+++ b/target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch
@@ -0,0 +1,551 @@
+This patch adds support for the D-Link DSM-G600 Rev A.
+This is an ARM XScale IXP4xx system relatively similar to
+the NSLU2 and NAS-100D already supported by mainline. An
+important difference is Gigabit Ethernet support using
+the Via Velocity chipset.
+
+This patch is the combined work of Michael Westerhof and
+Alessandro Zummo, with contributions from Michael-Luke
+Jones. This version addresses review comments from rmk
+and Deepak Saxena.
+
+Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
+Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
+Signed-off-by: Michael Westerhof <mwester@dls.net>
+
+---
+ arch/arm/mach-ixp4xx/Kconfig | 9 +
+ arch/arm/mach-ixp4xx/Makefile | 2
+ arch/arm/mach-ixp4xx/dsmg600-pci.c | 74 +++++++++++++
+ arch/arm/mach-ixp4xx/dsmg600-power.c | 130 ++++++++++++++++++++++++
+ arch/arm/mach-ixp4xx/dsmg600-setup.c | 175 +++++++++++++++++++++++++++++++++
+ include/asm-arm/arch-ixp4xx/dsmg600.h | 57 ++++++++++
+ include/asm-arm/arch-ixp4xx/hardware.h | 1
+ include/asm-arm/arch-ixp4xx/irqs.h | 10 +
+ 8 files changed, 458 insertions(+)
+
+Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.21.1-armeb.orig/arch/arm/mach-ixp4xx/Kconfig
++++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/Kconfig
+@@ -89,6 +89,15 @@
+ NAS 100d device. For more information on this platform,
+ see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
+
++config MACH_DSMG600
++ bool
++ prompt "D-Link DSM-G600 RevA"
++ select PCI
++ help
++ Say 'Y' here if you want your kernel to support D-Link's
++ DSM-G600 RevA device. For more information on this platform,
++ see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
++
+ #
+ # Avila and IXDP share the same source for now. Will change in future
+ #
+Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/Makefile
+===================================================================
+--- linux-2.6.21.1-armeb.orig/arch/arm/mach-ixp4xx/Makefile
++++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/Makefile
+@@ -12,6 +12,7 @@
+ obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
+ obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
+ obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
++obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
+
+ obj-y += common.o
+
+@@ -22,5 +23,6 @@
+ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
+ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
+ obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
++obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
+
+ obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
+Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-pci.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-pci.c
+@@ -0,0 +1,74 @@
++/*
++ * DSM-G600 board-level PCI initialization
++ *
++ * Copyright (C) 2006 Tower Technologies
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ *
++ * based on ixdp425-pci.c:
++ * Copyright (C) 2002 Intel Corporation.
++ * Copyright (C) 2003-2004 MontaVista Software, Inc.
++ *
++ * Maintainer: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach/pci.h>
++#include <asm/mach-types.h>
++
++void __init dsmg600_pci_preinit(void)
++{
++ set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW);
++ set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW);
++ set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW);
++ set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW);
++ set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW);
++ set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW);
++
++ ixp4xx_pci_preinit();
++}
++
++static int __init dsmg600_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ static int pci_irq_table[DSMG600_PCI_MAX_DEV][DSMG600_PCI_IRQ_LINES] =
++ {
++ { IRQ_DSMG600_PCI_INTE, -1, -1 },
++ { IRQ_DSMG600_PCI_INTA, -1, -1 },
++ { IRQ_DSMG600_PCI_INTB, IRQ_DSMG600_PCI_INTC, IRQ_DSMG600_PCI_INTD },
++ { IRQ_DSMG600_PCI_INTF, -1, -1 },
++ };
++
++ int irq = -1;
++
++ if (slot >= 1 && slot <= DSMG600_PCI_MAX_DEV &&
++ pin >= 1 && pin <= DSMG600_PCI_IRQ_LINES)
++ irq = pci_irq_table[slot-1][pin-1];
++
++ return irq;
++}
++
++struct hw_pci __initdata dsmg600_pci = {
++ .nr_controllers = 1,
++ .preinit = dsmg600_pci_preinit,
++ .swizzle = pci_std_swizzle,
++ .setup = ixp4xx_setup,
++ .scan = ixp4xx_scan_bus,
++ .map_irq = dsmg600_map_irq,
++};
++
++int __init dsmg600_pci_init(void)
++{
++ if (machine_is_dsmg600())
++ pci_common_init(&dsmg600_pci);
++
++ return 0;
++}
++
++subsys_initcall(dsmg600_pci_init);
+Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c
+@@ -0,0 +1,130 @@
++/*
++ * arch/arm/mach-ixp4xx/dsmg600-power.c
++ *
++ * DSM-G600 Power/Reset driver
++ * Author: Michael Westerhof <mwester@dls.net>
++ *
++ * Based on nslu2-power.c
++ * Copyright (C) 2005 Tower Technologies
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ *
++ * which was based on nslu2-io.c
++ * Copyright (C) 2004 Karen Spearel
++ *
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/reboot.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/jiffies.h>
++#include <linux/timer.h>
++
++#include <asm/mach-types.h>
++
++extern void ctrl_alt_del(void);
++
++/* This is used to make sure the power-button pusher is serious. The button
++ * must be held until the value of this counter reaches zero.
++ */
++static volatile int power_button_countdown;
++
++/* Must hold the button down for at least this many counts to be processed */
++#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
++
++static void dsmg600_power_handler(unsigned long data);
++static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0);
++
++static void dsmg600_power_handler(unsigned long data)
++{
++ /* This routine is called twice per second to check the
++ * state of the power button.
++ */
++
++ if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) {
++
++ /* IO Pin is 1 (button pushed) */
++ if (power_button_countdown > 0) {
++ power_button_countdown--;
++ }
++
++ } else {
++
++ /* Done on button release, to allow for auto-power-on mods. */
++ if (power_button_countdown == 0) {
++ /* Signal init to do the ctrlaltdel action, this will bypass
++ * init if it hasn't started and do a kernel_restart.
++ */
++ ctrl_alt_del();
++
++ /* Change the state of the power LED to "blink" */
++ gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
++ } else {
++ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
++ }
++ }
++
++ mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
++}
++
++static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
++{
++ /* This is the paper-clip reset, it shuts the machine down directly. */
++ machine_power_off();
++
++ return IRQ_HANDLED;
++}
++
++static int __init dsmg600_power_init(void)
++{
++ if (!(machine_is_dsmg600()))
++ return 0;
++
++ if (request_irq(DSMG600_RB_IRQ, &dsmg600_reset_handler,
++ IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button",
++ NULL) < 0) {
++
++ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
++ DSMG600_RB_IRQ);
++
++ return -EIO;
++ }
++
++ /* The power button on the D-Link DSM-G600 is on GPIO 15, but
++ * it cannot handle interrupts on that GPIO line. So we'll
++ * have to poll it with a kernel timer.
++ */
++
++ /* Make sure that the power button GPIO is set up as an input */
++ gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
++
++ /* Set the initial value for the power button IRQ handler */
++ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
++
++ mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
++
++ return 0;
++}
++
++static void __exit dsmg600_power_exit(void)
++{
++ if (!(machine_is_dsmg600()))
++ return;
++
++ del_timer_sync(&dsmg600_power_timer);
++
++ free_irq(DSMG600_RB_IRQ, NULL);
++}
++
++module_init(dsmg600_power_init);
++module_exit(dsmg600_power_exit);
++
++MODULE_AUTHOR("Michael Westerhof <mwester@dls.net>");
++MODULE_DESCRIPTION("DSM-G600 Power/Reset driver");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-setup.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-setup.c
+@@ -0,0 +1,175 @@
++/*
++ * DSM-G600 board-setup
++ *
++ * Copyright (C) 2006 Tower Technologies
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ *
++ * based ixdp425-setup.c:
++ * Copyright (C) 2003-2004 MontaVista Software, Inc.
++ *
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ * Maintainers: http://www.nslu2-linux.org/
++ */
++
++#include <linux/kernel.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data dsmg600_flash_data = {
++ .map_name = "cfi_probe",
++ .width = 2,
++};
++
++static struct resource dsmg600_flash_resource = {
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device dsmg600_flash = {
++ .name = "IXP4XX-Flash",
++ .id = 0,
++ .dev.platform_data = &dsmg600_flash_data,
++ .num_resources = 1,
++ .resource = &dsmg600_flash_resource,
++};
++
++static struct ixp4xx_i2c_pins dsmg600_i2c_gpio_pins = {
++ .sda_pin = DSMG600_SDA_PIN,
++ .scl_pin = DSMG600_SCL_PIN,
++};
++
++static struct platform_device dsmg600_i2c_controller = {
++ .name = "IXP4XX-I2C",
++ .id = 0,
++ .dev.platform_data = &dsmg600_i2c_gpio_pins,
++};
++
++#ifdef CONFIG_LEDS_CLASS
++static struct resource dsmg600_led_resources[] = {
++ {
++ .name = "power",
++ .start = DSMG600_LED_PWR_GPIO,
++ .end = DSMG600_LED_PWR_GPIO,
++ .flags = IXP4XX_GPIO_HIGH,
++ },
++ {
++ .name = "wlan",
++ .start = DSMG600_LED_WLAN_GPIO,
++ .end = DSMG600_LED_WLAN_GPIO,
++ .flags = IXP4XX_GPIO_LOW,
++ },
++};
++
++static struct platform_device dsmg600_leds = {
++ .name = "IXP4XX-GPIO-LED",
++ .id = -1,
++ .num_resources = ARRAY_SIZE(dsmg600_led_resources),
++ .resource = dsmg600_led_resources,
++};
++#endif
++
++static struct resource dsmg600_uart_resources[] = {
++ {
++ .start = IXP4XX_UART1_BASE_PHYS,
++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = IXP4XX_UART2_BASE_PHYS,
++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct plat_serial8250_port dsmg600_uart_data[] = {
++ {
++ .mapbase = IXP4XX_UART1_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART1,
++ .flags = UPF_BOOT_AUTOCONF,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ {
++ .mapbase = IXP4XX_UART2_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART2,
++ .flags = UPF_BOOT_AUTOCONF,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ { }
++};
++
++static struct platform_device dsmg600_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev.platform_data = dsmg600_uart_data,
++ .num_resources = ARRAY_SIZE(dsmg600_uart_resources),
++ .resource = dsmg600_uart_resources,
++};
++
++static struct platform_device *dsmg600_devices[] __initdata = {
++ &dsmg600_i2c_controller,
++ &dsmg600_flash,
++};
++
++static void dsmg600_power_off(void)
++{
++ /* enable the pwr cntl gpio */
++ gpio_line_config(DSMG600_PO_GPIO, IXP4XX_GPIO_OUT);
++
++ /* poweroff */
++ gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
++}
++
++static void __init dsmg600_init(void)
++{
++ ixp4xx_sys_init();
++
++ /* Make sure that GPIO14 and GPIO15 are not used as clocks */
++ *IXP4XX_GPIO_GPCLKR = 0;
++
++ dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++ dsmg600_flash_resource.end =
++ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
++
++ pm_power_off = dsmg600_power_off;
++
++ /* The UART is required on the DSM-G600 (Redboot cannot use the
++ * NIC) -- do it here so that it does *not* get removed if
++ * platform_add_devices fails!
++ */
++ (void)platform_device_register(&dsmg600_uart);
++
++ platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
++
++#ifdef CONFIG_LEDS_CLASS
++ /* We don't care whether or not this works. */
++ (void)platform_device_register(&dsmg600_leds);
++#endif
++}
++
++static void __init dsmg600_fixup(struct machine_desc *desc,
++ struct tag *tags, char **cmdline, struct meminfo *mi)
++{
++ /* The xtal on this machine is non-standard. */
++ ixp4xx_timer_freq = DSMG600_FREQ;
++}
++
++MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
++ /* Maintainer: www.nslu2-linux.org */
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
++ .boot_params = 0x00000100,
++ .fixup = dsmg600_fixup,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq,
++ .timer = &ixp4xx_timer,
++ .init_machine = dsmg600_init,
++MACHINE_END
+Index: linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/dsmg600.h
+===================================================================
+--- /dev/null
++++ linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/dsmg600.h
+@@ -0,0 +1,57 @@
++/*
++ * DSM-G600 platform specific definitions
++ *
++ * Copyright (C) 2006 Tower Technologies
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ *
++ * based on ixdp425.h:
++ * Copyright 2004 (C) MontaVista, Software, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#ifndef __ASM_ARCH_HARDWARE_H__
++#error "Do not include this directly, instead #include <asm/hardware.h>"
++#endif
++
++#define DSMG600_SDA_PIN 5
++#define DSMG600_SCL_PIN 4
++
++/*
++ * DSMG600 PCI IRQs
++ */
++#define DSMG600_PCI_MAX_DEV 4
++#define DSMG600_PCI_IRQ_LINES 3
++
++
++/* PCI controller GPIO to IRQ pin mappings */
++#define DSMG600_PCI_INTA_PIN 11
++#define DSMG600_PCI_INTB_PIN 10
++#define DSMG600_PCI_INTC_PIN 9
++#define DSMG600_PCI_INTD_PIN 8
++#define DSMG600_PCI_INTE_PIN 7
++#define DSMG600_PCI_INTF_PIN 6
++
++/* DSM-G600 Timer Setting */
++#define DSMG600_FREQ 66000000
++
++/* Buttons */
++
++#define DSMG600_PB_GPIO 15 /* power button */
++#define DSMG600_PB_BM (1L << DSMG600_PB_GPIO)
++
++#define DSMG600_RB_GPIO 3 /* reset button */
++
++#define DSMG600_RB_IRQ IRQ_IXP4XX_GPIO3
++
++#define DSMG600_PO_GPIO 2 /* power off */
++
++/* LEDs */
++
++#define DSMG600_LED_PWR_GPIO 0
++#define DSMG600_LED_PWR_BM (1L << DSMG600_LED_PWR_GPIO)
++
++#define DSMG600_LED_WLAN_GPIO 14
++#define DSMG600_LED_WLAN_BM (1L << DSMG600_LED_WLAN_GPIO)
+Index: linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/hardware.h
+===================================================================
+--- linux-2.6.21.1-armeb.orig/include/asm-arm/arch-ixp4xx/hardware.h
++++ linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/hardware.h
+@@ -47,5 +47,6 @@
+ #include "prpmc1100.h"
+ #include "nslu2.h"
+ #include "nas100d.h"
++#include "dsmg600.h"
+
+ #endif /* _ASM_ARCH_HARDWARE_H */
+Index: linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/irqs.h
+===================================================================
+--- linux-2.6.21.1-armeb.orig/include/asm-arm/arch-ixp4xx/irqs.h
++++ linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/irqs.h
+@@ -118,4 +118,14 @@
+ #define IRQ_NAS100D_PCI_INTD IRQ_IXP4XX_GPIO8
+ #define IRQ_NAS100D_PCI_INTE IRQ_IXP4XX_GPIO7
+
++/*
++ * D-Link DSM-G600 RevA board IRQs
++ */
++#define IRQ_DSMG600_PCI_INTA IRQ_IXP4XX_GPIO11
++#define IRQ_DSMG600_PCI_INTB IRQ_IXP4XX_GPIO10
++#define IRQ_DSMG600_PCI_INTC IRQ_IXP4XX_GPIO9
++#define IRQ_DSMG600_PCI_INTD IRQ_IXP4XX_GPIO8
++#define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7
++#define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6
++
+ #endif
diff --git a/target/linux/ixp4xx/patches/070-ixp4xx_freq_fixup.patch b/target/linux/ixp4xx/patches/070-ixp4xx_freq_fixup.patch
new file mode 100644
index 0000000000..5b406a7bc7
--- /dev/null
+++ b/target/linux/ixp4xx/patches/070-ixp4xx_freq_fixup.patch
@@ -0,0 +1,131 @@
+This patch is required as the frequency fixup in nslu2_init does not
+run sufficiently early in the boot sequence to take effect. In
+addition the dsmg600 setup code behaviour has been improved such
+that a 'fixup' routine is avoided.
+
+Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
+
+Index: linux-2.6.21-arm/arch/arm/mach-ixp4xx/nslu2-setup.c
+===================================================================
+--- linux-2.6.21-arm.orig/arch/arm/mach-ixp4xx/nslu2-setup.c 2007-05-07 12:05:40.000000000 -0700
++++ linux-2.6.21-arm/arch/arm/mach-ixp4xx/nslu2-setup.c 2007-05-07 12:15:56.000000000 -0700
+@@ -22,6 +22,7 @@
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
++#include <asm/mach/time.h>
+
+ static struct flash_platform_data nslu2_flash_data = {
+ .map_name = "cfi_probe",
+@@ -157,10 +158,21 @@
+ gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
+ }
+
+-static void __init nslu2_init(void)
++static void __init nslu2_timer_init(void)
+ {
+- ixp4xx_timer_freq = NSLU2_FREQ;
++ /* The xtal on this machine is non-standard. */
++ ixp4xx_timer_freq = NSLU2_FREQ;
++
++ /* Call standard timer_init function. */
++ ixp4xx_timer_init();
++}
+
++static struct sys_timer nslu2_timer = {
++ .init = nslu2_timer_init,
++};
++
++static void __init nslu2_init(void)
++{
+ ixp4xx_sys_init();
+
+ nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+@@ -185,6 +197,6 @@
+ .boot_params = 0x00000100,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+- .timer = &ixp4xx_timer,
++ .timer = &nslu2_timer,
+ .init_machine = nslu2_init,
+ MACHINE_END
+Index: linux-2.6.21-arm/arch/arm/mach-ixp4xx/common.c
+===================================================================
+--- linux-2.6.21-arm.orig/arch/arm/mach-ixp4xx/common.c 2007-05-07 12:05:40.000000000 -0700
++++ linux-2.6.21-arm/arch/arm/mach-ixp4xx/common.c 2007-05-07 12:15:16.000000000 -0700
+@@ -269,7 +269,7 @@
+ .handler = ixp4xx_timer_interrupt,
+ };
+
+-static void __init ixp4xx_timer_init(void)
++void __init ixp4xx_timer_init(void)
+ {
+ /* Clear Pending Interrupt by writing '1' to it */
+ *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
+Index: linux-2.6.21-arm/include/asm-arm/arch-ixp4xx/platform.h
+===================================================================
+--- linux-2.6.21-arm.orig/include/asm-arm/arch-ixp4xx/platform.h 2007-05-07 12:05:40.000000000 -0700
++++ linux-2.6.21-arm/include/asm-arm/arch-ixp4xx/platform.h 2007-05-07 12:15:16.000000000 -0700
+@@ -113,6 +113,7 @@
+ extern void ixp4xx_map_io(void);
+ extern void ixp4xx_init_irq(void);
+ extern void ixp4xx_sys_init(void);
++extern void ixp4xx_timer_init(void);
+ extern struct sys_timer ixp4xx_timer;
+ extern void ixp4xx_pci_preinit(void);
+ struct pci_sys_data;
+Index: linux-2.6.21-arm/arch/arm/mach-ixp4xx/dsmg600-setup.c
+===================================================================
+--- linux-2.6.21-arm.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c 2007-05-07 12:05:42.000000000 -0700
++++ linux-2.6.21-arm/arch/arm/mach-ixp4xx/dsmg600-setup.c 2007-05-07 12:16:07.000000000 -0700
+@@ -18,6 +18,7 @@
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
++#include <asm/mach/time.h>
+
+ static struct flash_platform_data dsmg600_flash_data = {
+ .map_name = "cfi_probe",
+@@ -128,6 +129,19 @@
+ gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
+ }
+
++static void __init dsmg600_timer_init(void)
++{
++ /* The xtal on this machine is non-standard. */
++ ixp4xx_timer_freq = DSMG600_FREQ;
++
++ /* Call standard timer_init function. */
++ ixp4xx_timer_init();
++}
++
++static struct sys_timer dsmg600_timer = {
++ .init = dsmg600_timer_init,
++};
++
+ static void __init dsmg600_init(void)
+ {
+ ixp4xx_sys_init();
+@@ -155,21 +169,13 @@
+ #endif
+ }
+
+-static void __init dsmg600_fixup(struct machine_desc *desc,
+- struct tag *tags, char **cmdline, struct meminfo *mi)
+-{
+- /* The xtal on this machine is non-standard. */
+- ixp4xx_timer_freq = DSMG600_FREQ;
+-}
+-
+ MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
+ /* Maintainer: www.nslu2-linux.org */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+- .fixup = dsmg600_fixup,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+- .timer = &ixp4xx_timer,
++ .timer = &dsmg600_timer,
+ .init_machine = dsmg600_init,
+ MACHINE_END
diff --git a/target/linux/ixp4xx/patches/080-trivial_nslu2_nas100d_cleanup.patch b/target/linux/ixp4xx/patches/080-trivial_nslu2_nas100d_cleanup.patch
new file mode 100644
index 0000000000..f0bfcdec5f
--- /dev/null
+++ b/target/linux/ixp4xx/patches/080-trivial_nslu2_nas100d_cleanup.patch
@@ -0,0 +1,196 @@
+This trivial patch updates the nslu2 and nas-100d headers to
+remove pointless GPIO defines, and updates nslu2-setup.c
+accordingly. In addition minor style cleanups to some comments
+are included.
+
+Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
+
+Index: linux-2.6.21-armeb/arch/arm/mach-ixp4xx/nslu2-setup.c
+===================================================================
+--- linux-2.6.21-armeb.orig/arch/arm/mach-ixp4xx/nslu2-setup.c 2007-05-09 07:32:43.000000000 -0700
++++ linux-2.6.21-armeb/arch/arm/mach-ixp4xx/nslu2-setup.c 2007-05-09 07:32:46.000000000 -0700
+@@ -50,26 +50,26 @@
+ static struct resource nslu2_led_resources[] = {
+ {
+ .name = "ready", /* green led */
+- .start = NSLU2_LED_GRN,
+- .end = NSLU2_LED_GRN,
++ .start = NSLU2_LED_GRN_GPIO,
++ .end = NSLU2_LED_GRN_GPIO,
+ .flags = IXP4XX_GPIO_HIGH,
+ },
+ {
+ .name = "status", /* red led */
+- .start = NSLU2_LED_RED,
+- .end = NSLU2_LED_RED,
++ .start = NSLU2_LED_RED_GPIO,
++ .end = NSLU2_LED_RED_GPIO,
+ .flags = IXP4XX_GPIO_HIGH,
+ },
+ {
+ .name = "disk-1",
+- .start = NSLU2_LED_DISK1,
+- .end = NSLU2_LED_DISK1,
++ .start = NSLU2_LED_DISK1_GPIO,
++ .end = NSLU2_LED_DISK1_GPIO,
+ .flags = IXP4XX_GPIO_LOW,
+ },
+ {
+ .name = "disk-2",
+- .start = NSLU2_LED_DISK2,
+- .end = NSLU2_LED_DISK2,
++ .start = NSLU2_LED_DISK2_GPIO,
++ .end = NSLU2_LED_DISK2_GPIO,
+ .flags = IXP4XX_GPIO_LOW,
+ },
+ };
+@@ -181,7 +181,8 @@
+
+ pm_power_off = nslu2_power_off;
+
+- /* This is only useful on a modified machine, but it is valuable
++ /*
++ * This is only useful on a modified machine, but it is valuable
+ * to have it first in order to see debug messages, and so that
+ * it does *not* get removed if platform_add_devices fails!
+ */
+Index: linux-2.6.21-armeb/include/asm-arm/arch-ixp4xx/nslu2.h
+===================================================================
+--- linux-2.6.21-armeb.orig/include/asm-arm/arch-ixp4xx/nslu2.h 2007-05-09 07:32:43.000000000 -0700
++++ linux-2.6.21-armeb/include/asm-arm/arch-ixp4xx/nslu2.h 2007-05-09 07:32:46.000000000 -0700
+@@ -9,7 +9,7 @@
+ * based on ixdp425.h:
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+- * This file is licensed under the terms of the GNU General Public
++ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+@@ -34,36 +34,14 @@
+ #define NSLU2_PCI_INTC_PIN 9
+ #define NSLU2_PCI_INTD_PIN 8
+
+-
+ /* NSLU2 Timer */
+ #define NSLU2_FREQ 66000000
+-#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
+-#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
+-
+-/* GPIO */
+-
+-#define NSLU2_GPIO0 0
+-#define NSLU2_GPIO1 1
+-#define NSLU2_GPIO2 2
+-#define NSLU2_GPIO3 3
+-#define NSLU2_GPIO4 4
+-#define NSLU2_GPIO5 5
+-#define NSLU2_GPIO6 6
+-#define NSLU2_GPIO7 7
+-#define NSLU2_GPIO8 8
+-#define NSLU2_GPIO9 9
+-#define NSLU2_GPIO10 10
+-#define NSLU2_GPIO11 11
+-#define NSLU2_GPIO12 12
+-#define NSLU2_GPIO13 13
+-#define NSLU2_GPIO14 14
+-#define NSLU2_GPIO15 15
+
+ /* Buttons */
+
+-#define NSLU2_PB_GPIO NSLU2_GPIO5
+-#define NSLU2_PO_GPIO NSLU2_GPIO8 /* power off */
+-#define NSLU2_RB_GPIO NSLU2_GPIO12
++#define NSLU2_PB_GPIO 5
++#define NSLU2_PO_GPIO 8 /* power off */
++#define NSLU2_RB_GPIO 12
+
+ #define NSLU2_PB_IRQ IRQ_IXP4XX_GPIO5
+ #define NSLU2_RB_IRQ IRQ_IXP4XX_GPIO12
+@@ -79,16 +57,16 @@
+
+ /* LEDs */
+
+-#define NSLU2_LED_RED NSLU2_GPIO0
+-#define NSLU2_LED_GRN NSLU2_GPIO1
++#define NSLU2_LED_RED_GPIO 0
++#define NSLU2_LED_GRN_GPIO 1
+
+-#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED)
+-#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN)
++#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED_GPIO)
++#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN_GPIO)
+
+-#define NSLU2_LED_DISK1 NSLU2_GPIO3
+-#define NSLU2_LED_DISK2 NSLU2_GPIO2
++#define NSLU2_LED_DISK1_GPIO 3
++#define NSLU2_LED_DISK2_GPIO 2
+
+-#define NSLU2_LED_DISK1_BM (1L << NSLU2_GPIO2)
+-#define NSLU2_LED_DISK2_BM (1L << NSLU2_GPIO3)
++#define NSLU2_LED_DISK1_BM (1L << NSLU2_LED_DISK1_GPIO)
++#define NSLU2_LED_DISK2_BM (1L << NSLU2_LED_DISK2_GPIO)
+
+
+Index: linux-2.6.21-armeb/include/asm-arm/arch-ixp4xx/nas100d.h
+===================================================================
+--- linux-2.6.21-armeb.orig/include/asm-arm/arch-ixp4xx/nas100d.h 2007-04-25 20:08:32.000000000 -0700
++++ linux-2.6.21-armeb/include/asm-arm/arch-ixp4xx/nas100d.h 2007-05-09 07:34:14.000000000 -0700
+@@ -10,7 +10,7 @@
+ * based on ixdp425.h:
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+- * This file is licensed under the terms of the GNU General Public
++ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+@@ -36,31 +36,11 @@
+ #define NAS100D_PCI_INTD_PIN 8
+ #define NAS100D_PCI_INTE_PIN 7
+
+-/* GPIO */
+-
+-#define NAS100D_GPIO0 0
+-#define NAS100D_GPIO1 1
+-#define NAS100D_GPIO2 2
+-#define NAS100D_GPIO3 3
+-#define NAS100D_GPIO4 4
+-#define NAS100D_GPIO5 5
+-#define NAS100D_GPIO6 6
+-#define NAS100D_GPIO7 7
+-#define NAS100D_GPIO8 8
+-#define NAS100D_GPIO9 9
+-#define NAS100D_GPIO10 10
+-#define NAS100D_GPIO11 11
+-#define NAS100D_GPIO12 12
+-#define NAS100D_GPIO13 13
+-#define NAS100D_GPIO14 14
+-#define NAS100D_GPIO15 15
+-
+-
+ /* Buttons */
+
+-#define NAS100D_PB_GPIO NAS100D_GPIO14
+-#define NAS100D_RB_GPIO NAS100D_GPIO4
+-#define NAS100D_PO_GPIO NAS100D_GPIO12 /* power off */
++#define NAS100D_PB_GPIO 14
++#define NAS100D_RB_GPIO 4
++#define NAS100D_PO_GPIO 12 /* power off */
+
+ #define NAS100D_PB_IRQ IRQ_IXP4XX_GPIO14
+ #define NAS100D_RB_IRQ IRQ_IXP4XX_GPIO4
+Index: linux-2.6.21-armeb/arch/arm/mach-ixp4xx/nas100d-setup.c
+===================================================================
+--- linux-2.6.21-armeb.orig/arch/arm/mach-ixp4xx/nas100d-setup.c 2007-05-09 07:32:43.000000000 -0700
++++ linux-2.6.21-armeb/arch/arm/mach-ixp4xx/nas100d-setup.c 2007-05-09 07:34:55.000000000 -0700
+@@ -155,7 +155,8 @@
+
+ pm_power_off = nas100d_power_off;
+
+- /* This is only useful on a modified machine, but it is valuable
++ /*
++ * This is only useful on a modified machine, but it is valuable
+ * to have it first in order to see debug messages, and so that
+ * it does *not* get removed if platform_add_devices fails!
+ */
diff --git a/target/linux/ixp4xx/patches/100-npe_driver.patch b/target/linux/ixp4xx/patches/100-npe_driver.patch
new file mode 100644
index 0000000000..78fb119bcd
--- /dev/null
+++ b/target/linux/ixp4xx/patches/100-npe_driver.patch
@@ -0,0 +1,4881 @@
+diff --git a/Documentation/networking/ixp4xx/IxNpeMicrocode.h b/Documentation/networking/ixp4xx/IxNpeMicrocode.h
+new file mode 100644
+index 0000000..e5a4bd3
+Index: linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/IxNpeMicrocode.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/IxNpeMicrocode.h 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,143 @@
++/*
++ * IxNpeMicrocode.h - Headerfile for compiling the Intel microcode C file
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ *
++ *
++ * compile with
++ *
++ * gcc -Wall IxNpeMicrocode.c -o IxNpeMicrocode
++ *
++ * Executing the resulting binary on your build-host creates the
++ * "NPE-[ABC].xxxxxxxx" files containing the selected microcode
++ *
++ * fetch the IxNpeMicrocode.c from the Intel Access Library.
++ * It will include this header.
++ *
++ * select Images for every NPE from the following
++ * (used C++ comments for easy uncommenting ....)
++ */
++
++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB
++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB
++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB
++// #define IX_NPEDL_NPEIMAGE_NPEA_HSS_TSLOT_SWITCH
++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL
++// #define IX_NPEDL_NPEIMAGE_NPEA_HSS_2_PORT
++// #define IX_NPEDL_NPEIMAGE_NPEA_DMA
++// #define IX_NPEDL_NPEIMAGE_NPEA_ATM_MPHY_12_PORT
++// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_MPHY_1_PORT
++// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_SPHY_1_PORT
++// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0
++// #define IX_NPEDL_NPEIMAGE_NPEA_WEP
++
++
++// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB
++//#define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB
++// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB
++// #define IX_NPEDL_NPEIMAGE_NPEB_DMA
++// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
++// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
++ #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL
++
++
++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB
++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB
++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB
++// #define IX_NPEDL_NPEIMAGE_NPEC_DMA
++// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_ETH_LEARN_FILTER_SPAN
++// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_ETH_LEARN_FILTER_FIREWALL
++ #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_CCM_ETH
++// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_ETH_LEARN_FILTER_SPAN_FIREWALL
++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL
++
++
++#include <stdio.h>
++#include <unistd.h>
++#include <stdlib.h>
++#include <netinet/in.h>
++#include <sys/types.h>
++#include <sys/stat.h>
++#include <fcntl.h>
++#include <errno.h>
++#include <endian.h>
++#include <byteswap.h>
++#include <string.h>
++
++#if __BYTE_ORDER == __LITTLE_ENDIAN
++#define to_le32(x) (x)
++#define to_be32(x) bswap_32(x)
++#else
++#define to_be32(x) (x)
++#define to_le32(x) bswap_32(x)
++#endif
++
++struct dl_image {
++ unsigned magic;
++ unsigned id;
++ unsigned size;
++ unsigned data[0];
++};
++
++const unsigned IxNpeMicrocode_array[];
++
++int main(int argc, char *argv[])
++{
++ struct dl_image *image = (struct dl_image *)IxNpeMicrocode_array;
++ int imgsiz, i, fd, cnt;
++ const unsigned *arrayptr = IxNpeMicrocode_array;
++ const char *names[] = { "IXP425", "IXP465", "unknown" };
++ int bigendian = 1;
++
++ if (argc > 1) {
++ if (!strcmp(argv[1], "-le"))
++ bigendian = 0;
++ else if (!strcmp(argv[1], "-be"))
++ bigendian = 1;
++ else {
++ printf("Usage: %s <-le|-be>\n", argv[0]);
++ return EXIT_FAILURE;
++ }
++ }
++
++ for (image = (struct dl_image *)arrayptr, cnt=0;
++ (image->id != 0xfeedf00d) && (image->magic == 0xfeedf00d);
++ image = (struct dl_image *)(arrayptr), cnt++)
++ {
++ unsigned char field[4];
++ imgsiz = image->size + 3;
++ *(unsigned*)field = to_be32(image->id);
++ char filename[40], slnk[10];
++
++ sprintf(filename, "NPE-%c.%08x", (field[0] & 0xf) + 'A',
++ image->id);
++ sprintf(slnk, "NPE-%c", (field[0] & 0xf) + 'A');
++ printf("Writing image: %s.NPE_%c Func: %2x Rev: %02x.%02x "
++ "Size: %5d to: '%s'\n",
++ names[field[0] >> 4], (field[0] & 0xf) + 'A',
++ field[1], field[2], field[3], imgsiz*4, filename);
++ fd = open(filename, O_CREAT | O_RDWR | O_TRUNC, 0644);
++ if (fd >= 0) {
++ for (i=0; i<imgsiz; i++) {
++ *(unsigned*)field = bigendian ?
++ to_be32(arrayptr[i]) :
++ to_le32(arrayptr[i]);
++ write(fd, field, sizeof(field));
++ }
++ close(fd);
++ unlink(slnk);
++ symlink(filename, slnk);
++ } else {
++ perror(filename);
++ }
++ arrayptr += imgsiz;
++ }
++ close(fd);
++ return 0;
++}
+Index: linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/README
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/README 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,62 @@
++Informations about the Networking Driver using the IXP4XX CPU internal NPEs
++and Queue manager.
++
++If this driver is used, the IAL (Intel Access Library) must not be loaded.
++However, the IAL may be loaded, if this Modules are unloaded:
++ ixp4xx_npe.ko, ixp4xx_qmgr.ko ixp4xx_mac.ko
++
++This also means that HW crypto accelleration does NOT work when using this
++driver, unless I have finished my crypto driver for NPE-C
++
++
++Adoption to your custom board:
++------------------------------
++use "arch/arm/mach-ixp4xx/ixdp425-setup.c" as template:
++
++in "static struct mac_plat_info" adopt the entry "phy_id" to your needs
++(Ask your hardware designer about the PHY id)
++
++The order of "&mac0" and "&mac1" in the "struct platform_device"
++determines which of them becomes eth0 and eth1
++
++
++The Microcode:
++---------------
++Solution 1)
++ Configure "CONFIG_HOTPLUG" and "CONFIG_FW_LOADER" and configure
++ IXP4XX_NPE as module.
++ The default hotplug script will load the Firmware from
++ /usr/lib/hotplug/firmware/NPE-[ABC]
++ see Documentation/firmware_class/hotplug-script
++
++ You should take care, that $ACTION is "add" and $SUBSYSTEM is "firmware"
++ to avoid unnessecary calls:
++ test $ACTION = "remove" -o $SUBSYSTEM != "firmware" && exit
++
++Solution 2)
++ create a char-dev: "mknod /dev/misc/npe c 10 184"
++ cat the Microcode into it:
++ cat /usr/lib/hotplug/firmware/NPE-* > /dev/misc/npe
++ This also works if the driver is linked to the kernel
++
++ Having a mix of both (e.g. solution 1 for NPE-B and solution 2 for NPE-C)
++ is perfectly ok and works.
++
++ The state of the NPEs can be seen and changed at:
++ /sys/bus/platform/devices/ixp4xx_npe.X/state
++
++
++Obtaining the Microcode:
++------------------------
++1) IxNpeMicrocode.h in this directory:
++ Download IPL_IXP400NPELIBRARYWITHCRYPTO-2_1.ZIP from Intel
++ It unpacks the Microcode IxNpeMicrocode.c
++ Read the Licence !
++ Compile it with "gcc -Wall IxNpeMicrocode.c -o IxNpeMicrocode" on your host.
++ The resulting images can be moved to "/usr/lib/hotplug/firmware"
++
++2) mc_grab.c in this directory:
++ Compile and execute it either on the host or on the target
++ to grab the microcode from a binary image like the RedBoot bootloader.
++
++
+Index: linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/mc_grab.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/mc_grab.c 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,97 @@
++/*
++ * mc_grab.c - grabs IXP4XX microcode from a binary datastream
++ * e.g. The redboot bootloader....
++ *
++ * usage: mc_grab 1010200 2010200 < /dev/mtd/0 > /dev/misc/npe
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++
++#include <stdlib.h>
++#include <stdio.h>
++#include <unistd.h>
++#include <netinet/in.h>
++#include <sys/types.h>
++#include <sys/stat.h>
++#include <fcntl.h>
++#include <errno.h>
++#include <string.h>
++
++#define MAX_IMG 6
++
++static void print_mc_info(unsigned id, int siz)
++{
++ unsigned char buf[sizeof(unsigned)];
++ *(unsigned*)buf = id;
++ unsigned idx;
++ const char *names[] = { "IXP425", "IXP465", "unknown" };
++
++ idx = (buf[0] >> 4) < 2 ? (buf[0] >> 4) : 2;
++
++ fprintf(stderr, "Device: %s:NPE_%c Func: %2x Rev: %02x.%02x "
++ "Size: %5d bytes ID:%08x\n", names[idx], (buf[0] & 0xf)+'A',
++ buf[1], buf[2], buf[3], siz*4, ntohl(id));
++}
++
++int main(int argc, char *argv[])
++{
++ int i,j;
++ unsigned char buf[sizeof(unsigned)];
++ unsigned magic = htonl(0xfeedf00d);
++ unsigned id, my_ids[MAX_IMG+1], siz, sizbe;
++ int ret=1, verbose=0;
++
++ for (i=0, j=0; i<argc-1 && j<MAX_IMG; i++) {
++ if (!strcmp(argv[i+1], "-v"))
++ verbose = 1;
++ else
++ my_ids[j++] = htonl(strtoul(argv[i+1], NULL, 16));
++ }
++ my_ids[j] = 0;
++ if (my_ids[0] == 0 && !verbose) {
++ fprintf(stderr, "Usage: %s <-v> [ID1] [ID2] [IDn]\n", argv[0]);
++ return 1;
++ }
++
++ while ((ret=read(0, buf, sizeof(unsigned))) == sizeof(unsigned)) {
++ if (*(unsigned*)buf != magic)
++ continue;
++ if ((ret=read(0, buf, sizeof(unsigned))) != sizeof(unsigned) )
++ break;
++ id = *(unsigned*)buf;
++
++ if (read(0, buf, sizeof(siz)) != sizeof(siz) )
++ break;
++ sizbe = *(unsigned*)buf;
++ siz = ntohl(sizbe);
++
++ if (verbose)
++ print_mc_info(id, siz);
++
++ for(i=0; my_ids[i]; i++)
++ if (id == my_ids[i])
++ break;
++ if (!my_ids[i])
++ continue;
++
++ if (!verbose)
++ print_mc_info(id, siz);
++
++ write(1, &magic, sizeof(magic));
++ write(1, &id, sizeof(id));
++ write(1, &sizbe, sizeof(sizbe));
++ for (i=0; i<siz; i++) {
++ if (read(0, buf, sizeof(unsigned)) != sizeof(unsigned))
++ break;
++ write(1, buf, sizeof(unsigned));
++ }
++ if (i != siz)
++ break;
++ }
++ if (ret)
++ fprintf(stderr, "Error reading Microcode\n");
++ return ret;
++}
+Index: linux-2.6.21-rc1-arm/arch/arm/mach-ixp4xx/common.c
+===================================================================
+--- linux-2.6.21-rc1-arm.orig/arch/arm/mach-ixp4xx/common.c 2007-02-21 02:24:18.000000000 -0800
++++ linux-2.6.21-rc1-arm/arch/arm/mach-ixp4xx/common.c 2007-02-21 02:24:35.000000000 -0800
+@@ -357,6 +357,90 @@
+ &ixp46x_i2c_controller
+ };
+
++static struct npe_plat_data npea = {
++ .name = "NPE-A",
++ .data_size = 0x800,
++ .inst_size = 0x1000,
++ .id = 0,
++};
++
++static struct npe_plat_data npeb = {
++ .name = "NPE-B",
++ .data_size = 0x800,
++ .inst_size = 0x800,
++ .id = 1,
++};
++
++static struct npe_plat_data npec = {
++ .name = "NPE-C",
++ .data_size = 0x800,
++ .inst_size = 0x800,
++ .id = 2,
++};
++
++static struct resource res_npea = {
++ .start = IXP4XX_NPEA_BASE_PHYS,
++ .end = IXP4XX_NPEA_BASE_PHYS + 0xfff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource res_npeb = {
++ .start = IXP4XX_NPEB_BASE_PHYS,
++ .end = IXP4XX_NPEB_BASE_PHYS + 0xfff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource res_npec = {
++ .start = IXP4XX_NPEC_BASE_PHYS,
++ .end = IXP4XX_NPEC_BASE_PHYS + 0xfff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device dev_npea = {
++ .name = "ixp4xx_npe",
++ .id = 0,
++ .dev.platform_data = &npea,
++ .num_resources = 1,
++ .resource = &res_npea,
++};
++
++static struct platform_device dev_npeb = {
++ .name = "ixp4xx_npe",
++ .id = 1,
++ .dev.platform_data = &npeb,
++ .num_resources = 1,
++ .resource = &res_npeb,
++};
++
++static struct platform_device dev_npec = {
++ .name = "ixp4xx_npe",
++ .id = 2,
++ .dev.platform_data = &npec,
++ .num_resources = 1,
++ .resource = &res_npec,
++};
++
++/* QMGR */
++static struct resource res_qmgr[] = {
++{
++ .start = IXP4XX_QMGR_BASE_PHYS,
++ .end = IXP4XX_QMGR_BASE_PHYS + IXP4XX_QMGR_REGION_SIZE -1,
++ .flags = IORESOURCE_MEM,
++}, {
++ .start = IRQ_IXP4XX_QM1,
++ .flags = IORESOURCE_IRQ,
++} };
++
++static struct platform_device qmgr = {
++ .name = "ixp4xx_qmgr",
++ .id = 0,
++ .dev = {
++ .coherent_dma_mask = DMA_32BIT_MASK,
++ },
++ .num_resources = ARRAY_SIZE(res_qmgr),
++ .resource = res_qmgr,
++};
++
+ unsigned long ixp4xx_exp_bus_size;
+ EXPORT_SYMBOL(ixp4xx_exp_bus_size);
+
+@@ -378,8 +462,19 @@
+ break;
+ }
+ }
++ npeb.inst_size = 0x1000;
++ npec.inst_size = 0x1000;
+ }
+
++ platform_device_register(&qmgr);
++
++ if (ix_fuse() & IX_FUSE_NPEA)
++ platform_device_register(&dev_npea);
++ if (ix_fuse() & IX_FUSE_NPEB)
++ platform_device_register(&dev_npeb);
++ if (ix_fuse() & IX_FUSE_NPEC)
++ platform_device_register(&dev_npec);
++
+ printk("IXP4xx: Using %luMiB expansion bus window size\n",
+ ixp4xx_exp_bus_size >> 20);
+ }
+Index: linux-2.6.21-rc1-arm/arch/arm/mach-ixp4xx/ixdp425-setup.c
+===================================================================
+--- linux-2.6.21-rc1-arm.orig/arch/arm/mach-ixp4xx/ixdp425-setup.c 2007-02-21 02:24:18.000000000 -0800
++++ linux-2.6.21-rc1-arm/arch/arm/mach-ixp4xx/ixdp425-setup.c 2007-02-21 02:24:35.000000000 -0800
+@@ -101,10 +101,59 @@
+ .resource = ixdp425_uart_resources
+ };
+
++/* MACs */
++static struct resource res_mac0 = {
++ .start = IXP4XX_EthB_BASE_PHYS,
++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource res_mac1 = {
++ .start = IXP4XX_EthC_BASE_PHYS,
++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct mac_plat_info plat_mac0 = {
++ .npe_id = 1,
++ .phy_id = 0,
++ .eth_id = 0,
++ .rxq_id = 27,
++ .txq_id = 24,
++ .rxdoneq_id = 4,
++};
++
++static struct mac_plat_info plat_mac1 = {
++ .npe_id = 2,
++ .phy_id = 1,
++ .eth_id = 1,
++ .rxq_id = 28,
++ .txq_id = 25,
++ .rxdoneq_id = 5,
++};
++
++static struct platform_device mac0 = {
++ .name = "ixp4xx_mac",
++ .id = 0,
++ .dev.platform_data = &plat_mac0,
++ .num_resources = 1,
++ .resource = &res_mac0,
++};
++
++static struct platform_device mac1 = {
++ .name = "ixp4xx_mac",
++ .id = 1,
++ .dev.platform_data = &plat_mac1,
++ .num_resources = 1,
++ .resource = &res_mac1,
++};
++
+ static struct platform_device *ixdp425_devices[] __initdata = {
+ &ixdp425_i2c_controller,
+ &ixdp425_flash,
+- &ixdp425_uart
++ &ixdp425_uart,
++ &mac0,
++ &mac1,
+ };
+
+ static void __init ixdp425_init(void)
+Index: linux-2.6.21-rc1-arm/drivers/net/Kconfig
+===================================================================
+--- linux-2.6.21-rc1-arm.orig/drivers/net/Kconfig 2007-02-21 02:24:18.000000000 -0800
++++ linux-2.6.21-rc1-arm/drivers/net/Kconfig 2007-02-21 02:24:35.000000000 -0800
+@@ -201,6 +201,8 @@
+
+ source "drivers/net/arm/Kconfig"
+
++source "drivers/net/ixp4xx/Kconfig"
++
+ config MACE
+ tristate "MACE (Power Mac ethernet) support"
+ depends on NET_ETHERNET && PPC_PMAC && PPC32
+Index: linux-2.6.21-rc1-arm/drivers/net/Makefile
+===================================================================
+--- linux-2.6.21-rc1-arm.orig/drivers/net/Makefile 2007-02-21 02:24:18.000000000 -0800
++++ linux-2.6.21-rc1-arm/drivers/net/Makefile 2007-02-21 02:24:35.000000000 -0800
+@@ -212,6 +212,7 @@
+ obj-$(CONFIG_IRDA) += irda/
+ obj-$(CONFIG_ETRAX_ETHERNET) += cris/
+ obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
++obj-$(CONFIG_IXP4XX_NPE) += ixp4xx/
+
+ obj-$(CONFIG_NETCONSOLE) += netconsole.o
+
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/Kconfig
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/Kconfig 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,48 @@
++config IXP4XX_QMGR
++ tristate "IXP4xx Queue Manager support"
++ depends on ARCH_IXP4XX
++ depends on NET_ETHERNET
++ help
++ The IXP4XX Queue manager is a configurable hardware ringbuffer.
++ It is used by the NPEs to exchange data from and to the CPU.
++ You can either use this OR the Intel Access Library (IAL)
++
++config IXP4XX_NPE
++ tristate "IXP4xx NPE support"
++ depends on ARCH_IXP4XX
++ depends on NET_ETHERNET
++ help
++ The IXP4XX NPE driver supports the 3 CPU co-processors called
++ "Network Processing Engines" (NPE). It adds support fo downloading
++ the Microcode (firmware) via Hotplug or character-special-device.
++ More about this at: Documentation/networking/ixp4xx/README.
++ You can either use this OR the Intel Access Library (IAL)
++
++config IXP4XX_FW_LOAD
++ bool "Use Firmware hotplug for Microcode download"
++ depends on IXP4XX_NPE
++ select HOTPLUG
++ select FW_LOADER
++ help
++ The default hotplug script will load the Firmware from
++ /usr/lib/hotplug/firmware/NPE-[ABC]
++ see Documentation/firmware_class/hotplug-script
++
++config IXP4XX_MAC
++ tristate "IXP4xx MAC support"
++ depends on IXP4XX_NPE
++ depends on IXP4XX_QMGR
++ depends on NET_ETHERNET
++ select MII
++ help
++ The IXP4XX MAC driver supports the MACs on the IXP4XX CPUs.
++ There are 2 on ixp425 and up to 5 on ixdp465.
++ You can either use this OR the Intel Access Library (IAL)
++
++config IXP4XX_CRYPTO
++ tristate "IXP4xx crypto support"
++ depends on IXP4XX_NPE
++ depends on IXP4XX_QMGR
++ help
++ This driver is a generic NPE-crypto access layer.
++ You need additional code in OCF for example.
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/Makefile
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/Makefile 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,7 @@
++obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
++obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
++obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o
++obj-$(CONFIG_IXP4XX_CRYPTO) += ixp4xx_crypto.o
++
++ixp4xx_npe-objs := ucode_dl.o npe_mh.o npe.o
++ixp4xx_mac-objs := mac_driver.o phy.o
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ixp4xx_crypto.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ixp4xx_crypto.c 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,851 @@
++/*
++ * ixp4xx_crypto.c - interface to the HW crypto
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#include <linux/ixp_qmgr.h>
++#include <linux/ixp_npe.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/device.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/kernel.h>
++#include <linux/ixp_crypto.h>
++
++#define SEND_QID 29
++#define RECV_QID 30
++
++#define NPE_ID 2 /* NPE C */
++
++#define QUEUE_SIZE 64
++#define MY_VERSION "0.0.1"
++
++/* local head for all sa_ctx */
++static struct ix_sa_master sa_master;
++
++static const struct ix_hash_algo _hash_algos[] = {
++{
++ .name = "MD5",
++ .cfgword = 0xAA010004,
++ .digest_len = 16,
++ .icv = "\x01\x23\x45\x67\x89\xAB\xCD\xEF"
++ "\xFE\xDC\xBA\x98\x76\x54\x32\x10",
++ .type = HASH_TYPE_MD5,
++},{
++ .name = "SHA1",
++ .cfgword = 0x00000005,
++ .digest_len = 20,
++ .icv = "\x67\x45\x23\x01\xEF\xCD\xAB\x89\x98\xBA"
++ "\xDC\xFE\x10\x32\x54\x76\xC3\xD2\xE1\xF0",
++ .type = HASH_TYPE_SHA1,
++#if 0
++},{
++ .name = "CBC MAC",
++ .digest_len = 64,
++ .aad_len = 48,
++ .type = HASH_TYPE_CBCMAC,
++#endif
++} };
++
++static const struct ix_cipher_algo _cipher_algos[] = {
++{
++ .name = "DES ECB",
++ .cfgword_enc = CIPH_ENCR | MOD_DES | MOD_ECB | KEYLEN_192,
++ .cfgword_dec = CIPH_DECR | MOD_DES | MOD_ECB | KEYLEN_192,
++ .block_len = 8,
++ .type = CIPHER_TYPE_DES,
++ .mode = CIPHER_MODE_ECB,
++},{
++ .name = "DES CBC",
++ .cfgword_enc = CIPH_ENCR | MOD_DES | MOD_CBC_ENC | KEYLEN_192,
++ .cfgword_dec = CIPH_DECR | MOD_DES | MOD_CBC_DEC | KEYLEN_192,
++ .iv_len = 8,
++ .block_len = 8,
++ .type = CIPHER_TYPE_DES,
++ .mode = CIPHER_MODE_CBC,
++},{
++ .name = "3DES ECB",
++ .cfgword_enc = CIPH_ENCR | MOD_TDEA3 | MOD_ECB | KEYLEN_192,
++ .cfgword_dec = CIPH_DECR | MOD_TDEA3 | MOD_ECB | KEYLEN_192,
++ .block_len = 8,
++ .type = CIPHER_TYPE_3DES,
++ .mode = CIPHER_MODE_ECB,
++},{
++ .name = "3DES CBC",
++ .cfgword_enc = CIPH_ENCR | MOD_TDEA3 | MOD_CBC_ENC | KEYLEN_192,
++ .cfgword_dec = CIPH_DECR | MOD_TDEA3 | MOD_CBC_DEC | KEYLEN_192,
++ .iv_len = 8,
++ .block_len = 8,
++ .type = CIPHER_TYPE_3DES,
++ .mode = CIPHER_MODE_CBC,
++},{
++ .name = "AES ECB",
++ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_ECB,
++ .cfgword_dec = CIPH_DECR | ALGO_AES | MOD_ECB,
++ .block_len = 16,
++ .type = CIPHER_TYPE_AES,
++ .mode = CIPHER_MODE_ECB,
++},{
++ .name = "AES CBC",
++ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_CBC_ENC,
++ .cfgword_dec = CIPH_DECR | ALGO_AES | MOD_CBC_DEC,
++ .block_len = 16,
++ .iv_len = 16,
++ .type = CIPHER_TYPE_AES,
++ .mode = CIPHER_MODE_CBC,
++},{
++ .name = "AES CTR",
++ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_CTR,
++ .cfgword_dec = CIPH_ENCR | ALGO_AES | MOD_CTR,
++ .block_len = 16,
++ .iv_len = 16,
++ .type = CIPHER_TYPE_AES,
++ .mode = CIPHER_MODE_CTR,
++#if 0
++},{
++ .name = "AES CCM",
++ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_CCM_ENC,
++ .cfgword_dec = CIPH_ENCR | ALGO_AES | MOD_CCM_DEC,
++ .block_len = 16,
++ .iv_len = 16,
++ .type = CIPHER_TYPE_AES,
++ .mode = CIPHER_MODE_CCM,
++#endif
++} };
++
++const struct ix_hash_algo *ix_hash_by_id(int type)
++{
++ int i;
++
++ for(i=0; i<ARRAY_SIZE(_hash_algos); i++) {
++ if (_hash_algos[i].type == type)
++ return _hash_algos + i;
++ }
++ return NULL;
++}
++
++const struct ix_cipher_algo *ix_cipher_by_id(int type, int mode)
++{
++ int i;
++
++ for(i=0; i<ARRAY_SIZE(_cipher_algos); i++) {
++ if (_cipher_algos[i].type==type && _cipher_algos[i].mode==mode)
++ return _cipher_algos + i;
++ }
++ return NULL;
++}
++
++static void irqcb_recv(struct qm_queue *queue);
++
++static int init_sa_master(struct ix_sa_master *master)
++{
++ struct npe_info *npe;
++ int ret = -ENODEV;
++
++ if (! (ix_fuse() & (IX_FUSE_HASH | IX_FUSE_AES | IX_FUSE_DES))) {
++ printk(KERN_ERR "ixp_crypto: No HW crypto available\n");
++ return ret;
++ }
++ memset(master, 0, sizeof(struct ix_sa_master));
++ master->npe_dev = get_npe_by_id(NPE_ID);
++ if (! master->npe_dev)
++ goto err;
++
++ npe = dev_get_drvdata(master->npe_dev);
++
++ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
++ switch (npe->img_info[1]) {
++ case 4:
++ printk(KERN_INFO "Crypto AES avaialable\n");
++ break;
++ case 5:
++ printk(KERN_INFO "Crypto AES and CCM avaialable\n");
++ break;
++ default:
++ printk(KERN_WARNING "Current microcode for %s has no"
++ " crypto capabilities\n", npe->plat->name);
++ break;
++ }
++ }
++ rwlock_init(&master->lock);
++ master->dmapool = dma_pool_create("ixp4xx_crypto", master->npe_dev,
++ sizeof(struct npe_crypt_cont), 32, 0);
++ if (!master->dmapool) {
++ ret = -ENOMEM;
++ goto err;
++ }
++ master->sendq = request_queue(SEND_QID, QUEUE_SIZE);
++ if (IS_ERR(master->sendq)) {
++ printk(KERN_ERR "ixp4xx_crypto: Error requesting Q: %d\n",
++ SEND_QID);
++ ret = PTR_ERR(master->sendq);
++ goto err;
++ }
++ master->recvq = request_queue(RECV_QID, QUEUE_SIZE);
++ if (IS_ERR(master->recvq)) {
++ printk(KERN_ERR "ixp4xx_crypto: Error requesting Q: %d\n",
++ RECV_QID);
++ ret = PTR_ERR(master->recvq);
++ release_queue(master->sendq);
++ goto err;
++ }
++
++ master->recvq->irq_cb = irqcb_recv;
++ queue_set_watermarks(master->recvq, 0, 0);
++ queue_set_irq_src(master->recvq, Q_IRQ_ID_NOT_E);
++ queue_enable_irq(master->recvq);
++ printk(KERN_INFO "ixp4xx_crypto " MY_VERSION " registered successfully\n");
++
++ return 0;
++err:
++ if (master->dmapool)
++ dma_pool_destroy(master->dmapool);
++ if (! master->npe_dev)
++ put_device(master->npe_dev);
++ return ret;
++
++}
++
++static void release_sa_master(struct ix_sa_master *master)
++{
++ struct npe_crypt_cont *cont;
++ unsigned long flags;
++
++ write_lock_irqsave(&master->lock, flags);
++ while (master->pool) {
++ cont = master->pool;
++ master->pool = cont->next;
++ dma_pool_free(master->dmapool, cont, cont->phys);
++ master->pool_size--;
++ }
++ write_unlock_irqrestore(&master->lock, flags);
++ if (master->pool_size) {
++ printk(KERN_ERR "ixp4xx_crypto: %d items lost from DMA pool\n",
++ master->pool_size);
++ }
++
++ dma_pool_destroy(master->dmapool);
++ release_queue(master->sendq);
++ release_queue(master->recvq);
++ return_npe_dev(master->npe_dev);
++}
++
++static struct npe_crypt_cont *ix_sa_get_cont(struct ix_sa_master *master)
++{
++ unsigned long flags;
++ struct npe_crypt_cont *cont;
++ dma_addr_t handle;
++
++ write_lock_irqsave(&master->lock, flags);
++ if (!master->pool) {
++ cont = dma_pool_alloc(master->dmapool, GFP_ATOMIC, &handle);
++ if (cont) {
++ master->pool_size++;
++ cont->phys = handle;
++ cont->virt = cont;
++ }
++ } else {
++ cont = master->pool;
++ master->pool = cont->next;
++ }
++ write_unlock_irqrestore(&master->lock, flags);
++ return cont;
++}
++
++static void
++ix_sa_return_cont(struct ix_sa_master *master,struct npe_crypt_cont *cont)
++{
++ unsigned long flags;
++
++ write_lock_irqsave(&master->lock, flags);
++ cont->next = master->pool;
++ master->pool = cont;
++ write_unlock_irqrestore(&master->lock, flags);
++}
++
++static void free_sa_dir(struct ix_sa_ctx *sa_ctx, struct ix_sa_dir *dir)
++{
++ memset(dir->npe_ctx, 0, NPE_CTX_LEN);
++ dma_pool_free(sa_ctx->master->dmapool, dir->npe_ctx,
++ dir->npe_ctx_phys);
++}
++
++static void ix_sa_ctx_destroy(struct ix_sa_ctx *sa_ctx)
++{
++ BUG_ON(sa_ctx->state != STATE_UNLOADING);
++ free_sa_dir(sa_ctx, &sa_ctx->encrypt);
++ free_sa_dir(sa_ctx, &sa_ctx->decrypt);
++ kfree(sa_ctx);
++ module_put(THIS_MODULE);
++}
++
++static void recv_pack(struct qm_queue *queue, u32 phys)
++{
++ struct ix_sa_ctx *sa_ctx;
++ struct npe_crypt_cont *cr_cont;
++ struct npe_cont *cont;
++ int failed;
++
++ failed = phys & 0x1;
++ phys &= ~0x3;
++
++ cr_cont = dma_to_virt(queue->dev, phys);
++ cr_cont = cr_cont->virt;
++ sa_ctx = cr_cont->ctl.crypt.sa_ctx;
++
++ phys = npe_to_cpu32(cr_cont->ctl.crypt.src_buf);
++ if (phys) {
++ cont = dma_to_virt(queue->dev, phys);
++ cont = cont->virt;
++ } else {
++ cont = NULL;
++ }
++ if (cr_cont->ctl.crypt.oper_type == OP_PERFORM) {
++ dma_unmap_single(sa_ctx->master->npe_dev,
++ cont->eth.phys_addr,
++ cont->eth.buf_len,
++ DMA_BIDIRECTIONAL);
++ if (sa_ctx->perf_cb)
++ sa_ctx->perf_cb(sa_ctx, cont->data, failed);
++ qmgr_return_cont(dev_get_drvdata(queue->dev), cont);
++ ix_sa_return_cont(sa_ctx->master, cr_cont);
++ if (atomic_dec_and_test(&sa_ctx->use_cnt))
++ ix_sa_ctx_destroy(sa_ctx);
++ return;
++ }
++
++ /* We are registering */
++ switch (cr_cont->ctl.crypt.mode) {
++ case NPE_OP_HASH_GEN_ICV:
++ /* 1 out of 2 HMAC preparation operations completed */
++ dma_unmap_single(sa_ctx->master->npe_dev,
++ cont->eth.phys_addr,
++ cont->eth.buf_len,
++ DMA_TO_DEVICE);
++ kfree(cont->data);
++ qmgr_return_cont(dev_get_drvdata(queue->dev), cont);
++ break;
++ case NPE_OP_ENC_GEN_KEY:
++ memcpy(sa_ctx->decrypt.npe_ctx + sizeof(u32),
++ sa_ctx->rev_aes->ctl.rev_aes_key + sizeof(u32),
++ sa_ctx->c_key.len);
++ /* REV AES data not needed anymore, free it */
++ ix_sa_return_cont(sa_ctx->master, sa_ctx->rev_aes);
++ sa_ctx->rev_aes = NULL;
++ break;
++ default:
++ printk(KERN_ERR "Unknown crypt-register mode: %x\n",
++ cr_cont->ctl.crypt.mode);
++
++ }
++ if (cr_cont->ctl.crypt.oper_type == OP_REG_DONE) {
++ if (sa_ctx->state == STATE_UNREGISTERED)
++ sa_ctx->state = STATE_REGISTERED;
++ if (sa_ctx->reg_cb)
++ sa_ctx->reg_cb(sa_ctx, failed);
++ }
++ ix_sa_return_cont(sa_ctx->master, cr_cont);
++ if (atomic_dec_and_test(&sa_ctx->use_cnt))
++ ix_sa_ctx_destroy(sa_ctx);
++}
++
++static void irqcb_recv(struct qm_queue *queue)
++{
++ u32 phys;
++
++ queue_ack_irq(queue);
++ while ((phys = queue_get_entry(queue)))
++ recv_pack(queue, phys);
++}
++
++static int init_sa_dir(struct ix_sa_ctx *sa_ctx, struct ix_sa_dir *dir)
++{
++ dir->npe_ctx = dma_pool_alloc(sa_ctx->master->dmapool,
++ sa_ctx->gfp_flags, &dir->npe_ctx_phys);
++ if (!dir->npe_ctx) {
++ return 1;
++ }
++ memset(dir->npe_ctx, 0, NPE_CTX_LEN);
++ return 0;
++}
++
++struct ix_sa_ctx *ix_sa_ctx_new(int priv_len, gfp_t flags)
++{
++ struct ix_sa_ctx *sa_ctx;
++ struct ix_sa_master *master = &sa_master;
++ struct npe_info *npe = dev_get_drvdata(master->npe_dev);
++
++ /* first check if Microcode was downloaded into this NPE */
++ if (!( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN)) {
++ printk(KERN_ERR "%s not running\n", npe->plat->name);
++ return NULL;
++ }
++ switch (npe->img_info[1]) {
++ case 4:
++ case 5:
++ break;
++ default:
++ /* No crypto Microcode */
++ return NULL;
++ }
++ if (!try_module_get(THIS_MODULE)) {
++ return NULL;
++ }
++
++ sa_ctx = kzalloc(sizeof(struct ix_sa_ctx) + priv_len, flags);
++ if (!sa_ctx) {
++ goto err_put;
++ }
++
++ sa_ctx->master = master;
++ sa_ctx->gfp_flags = flags;
++
++ if (init_sa_dir(sa_ctx, &sa_ctx->encrypt))
++ goto err_free;
++ if (init_sa_dir(sa_ctx, &sa_ctx->decrypt)) {
++ free_sa_dir(sa_ctx, &sa_ctx->encrypt);
++ goto err_free;
++ }
++ if (priv_len)
++ sa_ctx->priv = sa_ctx + 1;
++
++ atomic_set(&sa_ctx->use_cnt, 1);
++ return sa_ctx;
++
++err_free:
++ kfree(sa_ctx);
++err_put:
++ module_put(THIS_MODULE);
++ return NULL;
++}
++
++void ix_sa_ctx_free(struct ix_sa_ctx *sa_ctx)
++{
++ sa_ctx->state = STATE_UNLOADING;
++ if (atomic_dec_and_test(&sa_ctx->use_cnt))
++ ix_sa_ctx_destroy(sa_ctx);
++ else
++ printk("ix_sa_ctx_free -> delayed: %p %d\n",
++ sa_ctx, atomic_read(&sa_ctx->use_cnt));
++}
++
++/* http://www.ietf.org/rfc/rfc2104.txt */
++#define HMAC_IPAD_VALUE 0x36
++#define HMAC_OPAD_VALUE 0x5C
++#define PAD_BLOCKLEN 64
++
++static int register_chain_var(struct ix_sa_ctx *sa_ctx,
++ unsigned char *pad, u32 target, int init_len, u32 ctx_addr, int oper)
++{
++ struct npe_crypt_cont *cr_cont;
++ struct npe_cont *cont;
++
++ cr_cont = ix_sa_get_cont(sa_ctx->master);
++ if (!cr_cont)
++ return -ENOMEM;
++
++ cr_cont->ctl.crypt.sa_ctx = sa_ctx;
++ cr_cont->ctl.crypt.auth_offs = 0;
++ cr_cont->ctl.crypt.auth_len =cpu_to_npe16(PAD_BLOCKLEN);
++ cr_cont->ctl.crypt.crypto_ctx = cpu_to_npe32(ctx_addr);
++
++ cont = qmgr_get_cont(dev_get_drvdata(sa_ctx->master->sendq->dev));
++ if (!cont) {
++ ix_sa_return_cont(sa_ctx->master, cr_cont);
++ return -ENOMEM;
++ }
++
++ cont->data = pad;
++ cont->eth.next = 0;
++ cont->eth.buf_len = cpu_to_npe16(PAD_BLOCKLEN);
++ cont->eth.pkt_len = 0;
++
++ cont->eth.phys_addr = cpu_to_npe32(dma_map_single(
++ sa_ctx->master->npe_dev, pad, PAD_BLOCKLEN, DMA_TO_DEVICE));
++
++ cr_cont->ctl.crypt.src_buf = cpu_to_npe32(cont->phys);
++ cr_cont->ctl.crypt.oper_type = oper;
++
++ cr_cont->ctl.crypt.addr.icv = cpu_to_npe32(target);
++ cr_cont->ctl.crypt.mode = NPE_OP_HASH_GEN_ICV;
++ cr_cont->ctl.crypt.init_len = init_len;
++
++ atomic_inc(&sa_ctx->use_cnt);
++ queue_put_entry(sa_ctx->master->sendq, cr_cont->phys);
++ if (queue_stat(sa_ctx->master->sendq) == 2) { /* overflow */
++ atomic_dec(&sa_ctx->use_cnt);
++ qmgr_return_cont(dev_get_drvdata(sa_ctx->master->sendq->dev),
++ cont);
++ ix_sa_return_cont(sa_ctx->master, cr_cont);
++ return -ENOMEM;
++ }
++ return 0;
++}
++
++/* Return value
++ * 0 if nothing registered,
++ * 1 if something registered and
++ * < 0 on error
++ */
++static int ix_sa_ctx_setup_auth(struct ix_sa_ctx *sa_ctx,
++ const struct ix_hash_algo *algo, int len, int oper, int encrypt)
++{
++ unsigned char *ipad, *opad;
++ u32 itarget, otarget, ctx_addr;
++ unsigned char *cinfo;
++ int init_len, i, ret = 0;
++ struct qm_qmgr *qmgr;
++ struct ix_sa_dir *dir;
++ u32 cfgword;
++
++ dir = encrypt ? &sa_ctx->encrypt : &sa_ctx->decrypt;
++ cinfo = dir->npe_ctx + dir->npe_ctx_idx;
++
++ qmgr = dev_get_drvdata(sa_ctx->master->sendq->dev);
++
++ cinfo = dir->npe_ctx + dir->npe_ctx_idx;
++ sa_ctx->h_algo = algo;
++
++ if (!algo) {
++ dir->npe_mode |= NPE_OP_HMAC_DISABLE;
++ return 0;
++ }
++ if (algo->type == HASH_TYPE_CBCMAC) {
++ dir->npe_mode |= NPE_OP_CCM_ENABLE | NPE_OP_HMAC_DISABLE;
++ return 0;
++ }
++ if (sa_ctx->h_key.len > 64 || sa_ctx->h_key.len < algo->digest_len)
++ return -EINVAL;
++ if (len > algo->digest_len || (len % 4))
++ return -EINVAL;
++ if (!len)
++ len = algo->digest_len;
++
++ sa_ctx->digest_len = len;
++
++ /* write cfg word to cryptinfo */
++ cfgword = algo->cfgword | ((len/4) << 8);
++ *(u32*)cinfo = cpu_to_be32(cfgword);
++ cinfo += sizeof(cfgword);
++
++ /* write ICV to cryptinfo */
++ memcpy(cinfo, algo->icv, algo->digest_len);
++ cinfo += algo->digest_len;
++
++ itarget = dir->npe_ctx_phys + dir->npe_ctx_idx
++ + sizeof(algo->cfgword);
++ otarget = itarget + algo->digest_len;
++
++ opad = kzalloc(PAD_BLOCKLEN, sa_ctx->gfp_flags | GFP_DMA);
++ if (!opad) {
++ return -ENOMEM;
++ }
++ ipad = kzalloc(PAD_BLOCKLEN, sa_ctx->gfp_flags | GFP_DMA);
++ if (!ipad) {
++ kfree(opad);
++ return -ENOMEM;
++ }
++ memcpy(ipad, sa_ctx->h_key.key, sa_ctx->h_key.len);
++ memcpy(opad, sa_ctx->h_key.key, sa_ctx->h_key.len);
++ for (i = 0; i < PAD_BLOCKLEN; i++) {
++ ipad[i] ^= HMAC_IPAD_VALUE;
++ opad[i] ^= HMAC_OPAD_VALUE;
++ }
++ init_len = cinfo - (dir->npe_ctx + dir->npe_ctx_idx);
++ ctx_addr = dir->npe_ctx_phys + dir->npe_ctx_idx;
++
++ dir->npe_ctx_idx += init_len;
++ dir->npe_mode |= NPE_OP_HASH_ENABLE;
++
++ if (!encrypt)
++ dir->npe_mode |= NPE_OP_HASH_VERIFY;
++
++ /* register first chainvar */
++ ret = register_chain_var(sa_ctx, opad, otarget,
++ init_len, ctx_addr, OP_REGISTER);
++ if (ret) {
++ kfree(ipad);
++ kfree(opad);
++ return ret;
++ }
++
++ /* register second chainvar */
++ ret = register_chain_var(sa_ctx, ipad, itarget,
++ init_len, ctx_addr, oper);
++ if (ret) {
++ kfree(ipad);
++ return ret;
++ }
++
++ return 1;
++}
++
++static int gen_rev_aes_key(struct ix_sa_ctx *sa_ctx,
++ u32 keylen_cfg, int cipher_op)
++{
++ unsigned char *cinfo;
++ struct npe_crypt_cont *cr_cont;
++
++ keylen_cfg |= CIPH_ENCR | ALGO_AES | MOD_ECB;
++ sa_ctx->rev_aes = ix_sa_get_cont(sa_ctx->master);
++ if (!sa_ctx->rev_aes)
++ return -ENOMEM;
++
++ cinfo = sa_ctx->rev_aes->ctl.rev_aes_key;
++ *(u32*)cinfo = cpu_to_be32(keylen_cfg);
++ cinfo += sizeof(keylen_cfg);
++
++ memcpy(cinfo, sa_ctx->c_key.key, sa_ctx->c_key.len);
++
++ cr_cont = ix_sa_get_cont(sa_ctx->master);
++ if (!cr_cont) {
++ ix_sa_return_cont(sa_ctx->master, sa_ctx->rev_aes);
++ sa_ctx->rev_aes = NULL;
++ return -ENOMEM;
++ }
++ cr_cont->ctl.crypt.sa_ctx = sa_ctx;
++ cr_cont->ctl.crypt.oper_type = cipher_op;
++
++ cr_cont->ctl.crypt.crypt_offs = 0;
++ cr_cont->ctl.crypt.crypt_len = cpu_to_npe16(AES_BLOCK128);
++ cr_cont->ctl.crypt.addr.rev_aes = cpu_to_npe32(
++ sa_ctx->rev_aes->phys + sizeof(keylen_cfg));
++
++ cr_cont->ctl.crypt.src_buf = 0;
++ cr_cont->ctl.crypt.crypto_ctx = cpu_to_npe32(sa_ctx->rev_aes->phys);
++ cr_cont->ctl.crypt.mode = NPE_OP_ENC_GEN_KEY;
++ cr_cont->ctl.crypt.init_len = sa_ctx->decrypt.npe_ctx_idx;
++
++ atomic_inc(&sa_ctx->use_cnt);
++ queue_put_entry(sa_ctx->master->sendq, cr_cont->phys);
++ if (queue_stat(sa_ctx->master->sendq) == 2) { /* overflow */
++ atomic_dec(&sa_ctx->use_cnt);
++ ix_sa_return_cont(sa_ctx->master, cr_cont);
++ ix_sa_return_cont(sa_ctx->master, sa_ctx->rev_aes);
++ sa_ctx->rev_aes = NULL;
++ return -ENOMEM;
++ }
++
++ return 1;
++}
++
++/* Return value
++ * 0 if nothing registered,
++ * 1 if something registered and
++ * < 0 on error
++ */
++static int ix_sa_ctx_setup_cipher(struct ix_sa_ctx *sa_ctx,
++ const struct ix_cipher_algo *algo, int cipher_op, int encrypt)
++{
++ unsigned char *cinfo;
++ int keylen, init_len;
++ u32 cipher_cfg;
++ u32 keylen_cfg = 0;
++ struct ix_sa_dir *dir;
++
++ dir = encrypt ? &sa_ctx->encrypt : &sa_ctx->decrypt;
++ cinfo = dir->npe_ctx + dir->npe_ctx_idx;
++
++ sa_ctx->c_algo = algo;
++
++ if (!algo)
++ return 0;
++
++ if (algo->type == CIPHER_TYPE_DES && sa_ctx->c_key.len != 8)
++ return -EINVAL;
++
++ if (algo->type == CIPHER_TYPE_3DES && sa_ctx->c_key.len != 24)
++ return -EINVAL;
++
++ keylen = 24;
++
++ if (encrypt) {
++ cipher_cfg = algo->cfgword_enc;
++ dir->npe_mode |= NPE_OP_CRYPT_ENCRYPT;
++ } else {
++ cipher_cfg = algo->cfgword_dec;
++ }
++ if (algo->type == CIPHER_TYPE_AES) {
++ switch (sa_ctx->c_key.len) {
++ case 16: keylen_cfg = MOD_AES128 | KEYLEN_128; break;
++ case 24: keylen_cfg = MOD_AES192 | KEYLEN_192; break;
++ case 32: keylen_cfg = MOD_AES256 | KEYLEN_256; break;
++ default: return -EINVAL;
++ }
++ keylen = sa_ctx->c_key.len;
++ cipher_cfg |= keylen_cfg;
++ }
++
++ /* write cfg word to cryptinfo */
++ *(u32*)cinfo = cpu_to_be32(cipher_cfg);
++ cinfo += sizeof(cipher_cfg);
++
++ /* write cipher key to cryptinfo */
++ memcpy(cinfo, sa_ctx->c_key.key, sa_ctx->c_key.len);
++ cinfo += keylen;
++
++ init_len = cinfo - (dir->npe_ctx + dir->npe_ctx_idx);
++ dir->npe_ctx_idx += init_len;
++
++ dir->npe_mode |= NPE_OP_CRYPT_ENABLE;
++
++ if (algo->type == CIPHER_TYPE_AES && !encrypt) {
++ return gen_rev_aes_key(sa_ctx, keylen_cfg, cipher_op);
++ }
++
++ return 0;
++}
++
++/* returns 0 on OK, <0 on error and 1 on overflow */
++int ix_sa_crypto_perform(struct ix_sa_ctx *sa_ctx, u8 *data, void *ptr,
++ int datalen, int c_offs, int c_len, int a_offs, int a_len,
++ int hmac, char *iv, int encrypt)
++{
++ struct npe_crypt_cont *cr_cont;
++ struct npe_cont *cont;
++ u32 data_phys;
++ int ret = -ENOMEM;
++ struct ix_sa_dir *dir;
++
++ dir = encrypt ? &sa_ctx->encrypt : &sa_ctx->decrypt;
++
++ if (sa_ctx->state != STATE_REGISTERED)
++ return -ENOENT;
++
++ cr_cont = ix_sa_get_cont(sa_ctx->master);
++ if (!cr_cont)
++ return ret;
++
++ cr_cont->ctl.crypt.sa_ctx = sa_ctx;
++ cr_cont->ctl.crypt.crypto_ctx = cpu_to_npe32(dir->npe_ctx_phys);
++ cr_cont->ctl.crypt.oper_type = OP_PERFORM;
++ cr_cont->ctl.crypt.mode = dir->npe_mode;
++ cr_cont->ctl.crypt.init_len = dir->npe_ctx_idx;
++
++ if (sa_ctx->c_algo) {
++ cr_cont->ctl.crypt.crypt_offs = cpu_to_npe16(c_offs);
++ cr_cont->ctl.crypt.crypt_len = cpu_to_npe16(c_len);
++ if (sa_ctx->c_algo->iv_len) {
++ if (!iv) {
++ ret = -EINVAL;
++ goto err_cr;
++ }
++ memcpy(cr_cont->ctl.crypt.iv, iv,
++ sa_ctx->c_algo->iv_len);
++ }
++ }
++
++ if (sa_ctx->h_algo) {
++ /* prepare hashing */
++ cr_cont->ctl.crypt.auth_offs = cpu_to_npe16(a_offs);
++ cr_cont->ctl.crypt.auth_len = cpu_to_npe16(a_len);
++ }
++
++ data_phys = dma_map_single(sa_ctx->master->npe_dev,
++ data, datalen, DMA_BIDIRECTIONAL);
++ if (hmac)
++ cr_cont->ctl.crypt.addr.icv = cpu_to_npe32(data_phys + hmac);
++
++ /* Prepare the data ptr */
++ cont = qmgr_get_cont(dev_get_drvdata(sa_ctx->master->sendq->dev));
++ if (!cont) {
++ goto err_unmap;
++ }
++
++ cont->data = ptr;
++ cont->eth.next = 0;
++ cont->eth.buf_len = cpu_to_npe16(datalen);
++ cont->eth.pkt_len = 0;
++
++ cont->eth.phys_addr = cpu_to_npe32(data_phys);
++ cr_cont->ctl.crypt.src_buf = cpu_to_npe32(cont->phys);
++
++ atomic_inc(&sa_ctx->use_cnt);
++ queue_put_entry(sa_ctx->master->sendq, cr_cont->phys);
++ if (queue_stat(sa_ctx->master->sendq) != 2) {
++ return 0;
++ }
++
++ /* overflow */
++ printk("%s: Overflow\n", __FUNCTION__);
++ ret = -EAGAIN;
++ atomic_dec(&sa_ctx->use_cnt);
++ qmgr_return_cont(dev_get_drvdata(sa_ctx->master->sendq->dev), cont);
++
++err_unmap:
++ dma_unmap_single(sa_ctx->master->npe_dev, data_phys, datalen,
++ DMA_BIDIRECTIONAL);
++err_cr:
++ ix_sa_return_cont(sa_ctx->master, cr_cont);
++
++ return ret;
++}
++
++int ix_sa_ctx_setup_cipher_auth(struct ix_sa_ctx *sa_ctx,
++ const struct ix_cipher_algo *cipher,
++ const struct ix_hash_algo *auth, int len)
++{
++ int ret = 0, sum = 0;
++ int cipher_op;
++
++ if (sa_ctx->state != STATE_UNREGISTERED)
++ return -ENOENT;
++
++ atomic_inc(&sa_ctx->use_cnt);
++
++ cipher_op = auth ? OP_REGISTER : OP_REG_DONE;
++ if ((ret = ix_sa_ctx_setup_cipher(sa_ctx, cipher, OP_REGISTER, 1)) < 0)
++ goto out;
++ sum += ret;
++ if ((ret = ix_sa_ctx_setup_cipher(sa_ctx, cipher, cipher_op, 0)) < 0)
++ goto out;
++ sum += ret;
++ if ((ret = ix_sa_ctx_setup_auth(sa_ctx, auth, len, OP_REGISTER, 1)) < 0)
++ goto out;
++ sum += ret;
++ if ((ret = ix_sa_ctx_setup_auth(sa_ctx, auth, len, OP_REG_DONE, 0)) < 0)
++ goto out;
++ sum += ret;
++
++ /* Nothing registered ?
++ * Ok, then we are done and call the callback here.
++ */
++ if (!sum) {
++ if (sa_ctx->state == STATE_UNREGISTERED)
++ sa_ctx->state = STATE_REGISTERED;
++ if (sa_ctx->reg_cb)
++ sa_ctx->reg_cb(sa_ctx, 0);
++ }
++out:
++ atomic_dec(&sa_ctx->use_cnt);
++ return ret;
++}
++
++static int __init init_crypto(void)
++{
++ return init_sa_master(&sa_master);
++}
++
++static void __exit finish_crypto(void)
++{
++ release_sa_master(&sa_master);
++}
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
++
++EXPORT_SYMBOL(ix_hash_by_id);
++EXPORT_SYMBOL(ix_cipher_by_id);
++
++EXPORT_SYMBOL(ix_sa_ctx_new);
++EXPORT_SYMBOL(ix_sa_ctx_free);
++EXPORT_SYMBOL(ix_sa_ctx_setup_cipher_auth);
++EXPORT_SYMBOL(ix_sa_crypto_perform);
++
++module_init(init_crypto);
++module_exit(finish_crypto);
++
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ixp4xx_qmgr.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ixp4xx_qmgr.c 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,474 @@
++/*
++ * qmgr.c - reimplementation of the queue configuration interface.
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/dmapool.h>
++#include <linux/interrupt.h>
++#include <linux/err.h>
++#include <linux/delay.h>
++#include <asm/uaccess.h>
++#include <asm/io.h>
++
++#include <linux/ixp_qmgr.h>
++#include <linux/ixp_npe.h>
++
++#define IXQMGR_VERSION "IXP4XX Q Manager 0.2.1"
++
++static struct device *qmgr_dev = NULL;
++
++static int poll_freq = 4000;
++static int poll_enable = 0;
++static u32 timer_countup_ticks;
++
++module_param(poll_freq, int, 0644);
++module_param(poll_enable, int, 0644);
++
++int queue_len(struct qm_queue *queue)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++ int diff, offs;
++ u32 val;
++
++ offs = queue->id/8 + QUE_LOW_STAT0;
++ val = *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id);
++
++ diff = (val - (val >> 7)) & 0x7f;
++ if (!diff) {
++ /* diff == 0 means either empty or full, must look at STAT0 */
++ if ((*(qmgr->addr + offs) >> ((queue->id % 8)*4)) & 0x04)
++ diff = queue->len;
++ }
++ return diff;
++}
++
++static int request_pool(struct device *dev, int count)
++{
++ int i;
++ struct npe_cont *cont;
++ struct qm_qmgr *qmgr = dev_get_drvdata(dev);
++ dma_addr_t handle;
++
++ for (i=0; i<count; i++) {
++ cont = dma_pool_alloc(qmgr->dmapool, GFP_KERNEL, &handle);
++ if (!cont) {
++ return -ENOMEM;
++ }
++ cont->phys = handle;
++ cont->virt = cont;
++ write_lock(&qmgr->lock);
++ cont->next = qmgr->pool;
++ qmgr->pool = cont;
++ write_unlock(&qmgr->lock);
++ }
++ return 0;
++}
++
++static int free_pool(struct device *dev, int count)
++{
++ int i;
++ struct npe_cont *cont;
++ struct qm_qmgr *qmgr = dev_get_drvdata(dev);
++
++ for (i=0; i<count; i++) {
++ write_lock(&qmgr->lock);
++ cont = qmgr->pool;
++ if (!cont) {
++ write_unlock(&qmgr->lock);
++ return -1;
++ }
++ qmgr->pool = cont->next;
++ write_unlock(&qmgr->lock);
++ dma_pool_free(qmgr->dmapool, cont, cont->phys);
++ }
++ return 0;
++}
++
++static int get_free_qspace(struct qm_qmgr *qmgr, int len)
++{
++ int words = (qmgr->res->end - qmgr->res->start + 1) / 4 -
++ IX_QMGR_SRAM_SPACE;
++ int i,q;
++
++ for (i=0; i<words; i+=len) {
++ for (q=0; q<MAX_QUEUES; q++) {
++ struct qm_queue *qu = qmgr->queues[q];
++ if (!qu)
++ continue;
++ if ((qu->addr + qu->len > i) && (qu->addr < i + len))
++ break;
++ }
++ if (q == MAX_QUEUES) {
++ /* we have a free address */
++ return i;
++ }
++ }
++ return -1;
++}
++
++static inline int _log2(int x)
++{
++ int r=0;
++ while(x>>=1)
++ r++;
++ return r;
++}
++
++/*
++ * 32bit Config registers at IX_QMGR_QUECONFIG_BASE_OFFSET[Qid]
++ * 0 - 6 WRPTR Word offset to baseaddr (index 0 .. BSIZE-1)
++ * 7 -13 RDPTR ''
++ * 14 -21 BADDR baseaddr = (offset to IX_QMGR_QUEBUFFER_SPACE_OFFSET) >> 6
++ * 22 -23 ESIZE entrySizeInWords (always 00 because entrySizeInWords==1)
++ * 24 -25 BSIZE qSizeInWords 00=16,01=32,10=64,11=128
++ * 26 -28 NE nearly empty
++ * 29 -31 NF nearly full
++ */
++static int conf_q_regs(struct qm_queue *queue)
++{
++ int bsize = _log2(queue->len/16);
++ int baddr = queue->addr + IX_QMGR_QCFG_SIZE;
++
++ /* +2, because baddr is in words and not in bytes */
++ queue_write_cfg_reg(queue, (bsize << 24) | (baddr<<(14-6+2)) );
++
++ return 0;
++}
++
++static void pmu_timer_restart(void)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++
++ __asm__(" mcr p14,0,%0,c1,c1,0\n" /* write current counter */
++ : : "r" (timer_countup_ticks));
++
++ __asm__(" mrc p14,0,r1,c4,c1,0; " /* get int enable register */
++ " orr r1,r1,#1; "
++ " mcr p14,0,r1,c5,c1,0; " /* clear overflow */
++ " mcr p14,0,r1,c4,c1,0\n" /* enable interrupts */
++ : : : "r1");
++
++ local_irq_restore(flags);
++}
++
++static void pmu_timer_init(void)
++{
++ u32 controlRegisterMask =
++ BIT(0) | /* enable counters */
++ BIT(2); /* reset clock counter; */
++
++ /*
++ * Compute the number of xscale cycles needed between each
++ * PMU IRQ. This is done from the result of an OS calibration loop.
++ *
++ * For 533MHz CPU, 533000000 tick/s / 4000 times/sec = 138250
++ * 4000 times/sec = 37 mbufs/interrupt at line rate
++ * The pmu timer is reset to -138250 = 0xfffde3f6, to trigger an IRQ
++ * when this up counter overflows.
++ *
++ * The multiplication gives a number of instructions per second.
++ * which is close to the processor frequency, and then close to the
++ * PMU clock rate.
++ *
++ * 2 is the number of instructions per loop
++ *
++ */
++
++ timer_countup_ticks = - ((loops_per_jiffy * HZ * 2) / poll_freq);
++
++ /* enable the CCNT (clock count) timer from the PMU */
++ __asm__(" mcr p14,0,%0,c0,c1,0\n"
++ : : "r" (controlRegisterMask));
++}
++
++static void pmu_timer_disable(void)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++
++ __asm__(" mrc p14,0,r1,c4,c1,0; " /* get int enable register */
++ " and r1,r1,#0x1e; "
++ " mcr p14,0,r1,c4,c1,0\n" /* disable interrupts */
++ : : : "r1");
++ local_irq_restore(flags);
++}
++
++void queue_set_watermarks(struct qm_queue *queue, unsigned ne, unsigned nf)
++{
++ u32 val;
++ /* calculate the register values
++ * 0->0, 1->1, 2->2, 4->3, 8->4 16->5...*/
++ ne = _log2(ne<<1) & 0x7;
++ nf = _log2(nf<<1) & 0x7;
++
++ /* Mask out old watermarks */
++ val = queue_read_cfg_reg(queue) & ~0xfc000000;
++ queue_write_cfg_reg(queue, val | (ne << 26) | (nf << 29));
++}
++
++int queue_set_irq_src(struct qm_queue *queue, int flag)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++ u32 reg;
++ int offs, bitoffs;
++
++ /* Q 0-7 are in REG0, 8-15 are in REG1, etc. They occupy 4 bits/Q */
++ offs = queue->id/8 + INT0_SRC_SELREG0;
++ bitoffs = (queue->id % 8)*4;
++
++ reg = *(qmgr->addr + offs) & ~(0xf << bitoffs);
++ *(qmgr->addr + offs) = reg | (flag << bitoffs);
++
++ return 0;
++}
++
++static irqreturn_t irq_qm1(int irq, void *dev_id)
++{
++ struct qm_qmgr *qmgr = dev_id;
++ int offs, reg;
++ struct qm_queue *queue;
++
++ if (poll_enable)
++ pmu_timer_restart();
++
++ reg = *(qmgr->addr + QUE_INT_REG0);
++ while(reg) {
++ /*
++ * count leading zeros. "offs" gets
++ * the amount of leading 0 in "reg"
++ */
++ asm ("clz %0, %1;" : "=r"(offs) : "r"(reg));
++ offs = 31 - offs;
++ reg &= ~(1 << offs);
++ queue = qmgr->queues[offs];
++ if (likely(queue)) {
++ if (likely(queue->irq_cb)) {
++ queue->irq_cb(queue);
++ } else {
++ printk(KERN_ERR "Missing callback for Q %d\n",
++ offs);
++ }
++ } else {
++ printk(KERN_ERR "IRQ for unregistered Q %d\n", offs);
++ }
++ }
++ return IRQ_HANDLED;
++}
++
++struct qm_queue *request_queue(int qid, int len)
++{
++ int ram;
++ struct qm_qmgr *qmgr;
++ struct qm_queue *queue;
++
++ if (!qmgr_dev)
++ return ERR_PTR(-ENODEV);
++
++ if ((qid < 0) || (qid > MAX_QUEUES))
++ return ERR_PTR(-ERANGE);
++
++ switch (len) {
++ case 16:
++ case 32:
++ case 64:
++ case 128: break;
++ default : return ERR_PTR(-EINVAL);
++ }
++
++ qmgr = dev_get_drvdata(qmgr_dev);
++
++ if (qmgr->queues[qid]) {
++ /* not an error, just in use already */
++ return NULL;
++ }
++ if ((ram = get_free_qspace(qmgr, len)) < 0) {
++ printk(KERN_ERR "No free SRAM space for this queue\n");
++ return ERR_PTR(-ENOMEM);
++ }
++ if (!(queue = kzalloc(sizeof(struct qm_queue), GFP_KERNEL)))
++ return ERR_PTR(-ENOMEM);
++
++ if (!try_module_get(THIS_MODULE)) {
++ kfree(queue);
++ return ERR_PTR(-ENODEV);
++ }
++
++ queue->addr = ram;
++ queue->len = len;
++ queue->id = qid;
++ queue->dev = get_device(qmgr_dev);
++ queue->acc_reg = qmgr->addr + (4 * qid);
++ qmgr->queues[qid] = queue;
++ if (request_pool(qmgr_dev, len)) {
++ printk(KERN_ERR "Failed to request DMA pool of Q %d\n", qid);
++ }
++
++ conf_q_regs(queue);
++ return queue;
++}
++
++void release_queue(struct qm_queue *queue)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++
++ BUG_ON(qmgr->queues[queue->id] != queue);
++ qmgr->queues[queue->id] = NULL;
++
++ if (free_pool(queue->dev, queue->len)) {
++ printk(KERN_ERR "Failed to release DMA pool of Q %d\n",
++ queue->id);
++ }
++ queue_disable_irq(queue);
++ queue_write_cfg_reg(queue, 0);
++
++ module_put(THIS_MODULE);
++ put_device(queue->dev);
++ kfree(queue);
++}
++
++
++
++
++static int qmgr_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ struct qm_qmgr *qmgr;
++ int size, ret=0, i;
++
++ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0)))
++ return -EIO;
++
++ if ((i = platform_get_irq(pdev, 0)) < 0)
++ return -EIO;
++
++ if (!(qmgr = kzalloc(sizeof(struct qm_qmgr), GFP_KERNEL)))
++ return -ENOMEM;
++
++ qmgr->irq = i;
++ size = res->end - res->start +1;
++ qmgr->res = request_mem_region(res->start, size, "ixp_qmgr");
++ if (!qmgr->res) {
++ ret = -EBUSY;
++ goto out_free;
++ }
++
++ qmgr->addr = ioremap(res->start, size);
++ if (!qmgr->addr) {
++ ret = -ENOMEM;
++ goto out_rel;
++ }
++
++ /* Reset Q registers */
++ for (i=0; i<4; i++)
++ *(qmgr->addr + QUE_LOW_STAT0 +i) = 0x33333333;
++ for (i=0; i<10; i++)
++ *(qmgr->addr + QUE_UO_STAT0 +i) = 0x0;
++ for (i=0; i<4; i++)
++ *(qmgr->addr + INT0_SRC_SELREG0 +i) = 0x0;
++ for (i=0; i<2; i++) {
++ *(qmgr->addr + QUE_IE_REG0 +i) = 0x00;
++ *(qmgr->addr + QUE_INT_REG0 +i) = 0xffffffff;
++ }
++ for (i=0; i<64; i++) {
++ *(qmgr->addr + IX_QMGR_QCFG_BASE + i) = 0x0;
++ }
++
++ if (poll_enable) {
++ pmu_timer_init();
++ qmgr->irq = IRQ_IXP4XX_XSCALE_PMU;
++ }
++ ret = request_irq(qmgr->irq, irq_qm1, SA_SHIRQ | SA_INTERRUPT,
++ "qmgr", qmgr);
++ if (ret) {
++ printk(KERN_ERR "Failed to request IRQ(%d)\n", qmgr->irq);
++ ret = -EIO;
++ goto out_rel;
++ }
++ if (poll_enable)
++ pmu_timer_restart();
++
++ rwlock_init(&qmgr->lock);
++ qmgr->dmapool = dma_pool_create("qmgr", &pdev->dev,
++ sizeof(struct npe_cont), 32, 0);
++ platform_set_drvdata(pdev, qmgr);
++
++ qmgr_dev = &pdev->dev;
++
++ printk(KERN_INFO IXQMGR_VERSION " initialized.\n");
++
++ return 0;
++
++out_rel:
++ release_resource(qmgr->res);
++out_free:
++ kfree(qmgr);
++ return ret;
++}
++
++static int qmgr_remove(struct platform_device *pdev)
++{
++ struct qm_qmgr *qmgr = platform_get_drvdata(pdev);
++ int i;
++
++ for (i=0; i<MAX_QUEUES; i++) {
++ if (qmgr->queues[i]) {
++ printk(KERN_ERR "WARNING Unreleased Q: %d\n", i);
++ release_queue(qmgr->queues[i]);
++ }
++ }
++
++ if (poll_enable)
++ pmu_timer_disable();
++
++ synchronize_irq (qmgr->irq);
++ free_irq(qmgr->irq, qmgr);
++
++ dma_pool_destroy(qmgr->dmapool);
++ iounmap(qmgr->addr);
++ release_resource(qmgr->res);
++ platform_set_drvdata(pdev, NULL);
++ qmgr_dev = NULL;
++ kfree(qmgr);
++ return 0;
++}
++
++static struct platform_driver ixp4xx_qmgr = {
++ .driver.name = "ixp4xx_qmgr",
++ .probe = qmgr_probe,
++ .remove = qmgr_remove,
++};
++
++
++static int __init init_qmgr(void)
++{
++ return platform_driver_register(&ixp4xx_qmgr);
++}
++
++static void __exit finish_qmgr(void)
++{
++ platform_driver_unregister(&ixp4xx_qmgr);
++}
++
++module_init(init_qmgr);
++module_exit(finish_qmgr);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
++
++EXPORT_SYMBOL(request_queue);
++EXPORT_SYMBOL(release_queue);
++EXPORT_SYMBOL(queue_set_irq_src);
++EXPORT_SYMBOL(queue_set_watermarks);
++EXPORT_SYMBOL(queue_len);
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/mac.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/mac.h 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,275 @@
++/*
++ * Copyright (C) 2002-2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#include <linux/resource.h>
++#include <linux/netdevice.h>
++#include <linux/io.h>
++#include <linux/mii.h>
++#include <linux/workqueue.h>
++#include <asm/hardware.h>
++#include <linux/ixp_qmgr.h>
++
++/* 32 bit offsets to be added to u32 *pointers */
++#define MAC_TX_CNTRL1 0x00 // 0x000
++#define MAC_TX_CNTRL2 0x01 // 0x004
++#define MAC_RX_CNTRL1 0x04 // 0x010
++#define MAC_RX_CNTRL2 0x05 // 0x014
++#define MAC_RANDOM_SEED 0x08 // 0x020
++#define MAC_THRESH_P_EMPTY 0x0c // 0x030
++#define MAC_THRESH_P_FULL 0x0e // 0x038
++#define MAC_BUF_SIZE_TX 0x10 // 0x040
++#define MAC_TX_DEFER 0x14 // 0x050
++#define MAC_RX_DEFER 0x15 // 0x054
++#define MAC_TX_TWO_DEFER_1 0x18 // 0x060
++#define MAC_TX_TWO_DEFER_2 0x19 // 0x064
++#define MAC_SLOT_TIME 0x1c // 0x070
++#define MAC_MDIO_CMD 0x20 // 0x080 4 registers 0x20 - 0x23
++#define MAC_MDIO_STS 0x24 // 0x090 4 registers 0x24 - 0x27
++#define MAC_ADDR_MASK 0x28 // 0x0A0 6 registers 0x28 - 0x2d
++#define MAC_ADDR 0x30 // 0x0C0 6 registers 0x30 - 0x35
++#define MAC_INT_CLK_THRESH 0x38 // 0x0E0 1 register
++#define MAC_UNI_ADDR 0x3c // 0x0F0 6 registers 0x3c - 0x41
++#define MAC_CORE_CNTRL 0x7f // 0x1fC
++
++/* TX Control Register 1*/
++
++#define TX_CNTRL1_TX_EN BIT(0)
++#define TX_CNTRL1_DUPLEX BIT(1)
++#define TX_CNTRL1_RETRY BIT(2)
++#define TX_CNTRL1_PAD_EN BIT(3)
++#define TX_CNTRL1_FCS_EN BIT(4)
++#define TX_CNTRL1_2DEFER BIT(5)
++#define TX_CNTRL1_RMII BIT(6)
++
++/* TX Control Register 2 */
++#define TX_CNTRL2_RETRIES_MASK 0xf
++
++/* RX Control Register 1 */
++#define RX_CNTRL1_RX_EN BIT(0)
++#define RX_CNTRL1_PADSTRIP_EN BIT(1)
++#define RX_CNTRL1_CRC_EN BIT(2)
++#define RX_CNTRL1_PAUSE_EN BIT(3)
++#define RX_CNTRL1_LOOP_EN BIT(4)
++#define RX_CNTRL1_ADDR_FLTR_EN BIT(5)
++#define RX_CNTRL1_RX_RUNT_EN BIT(6)
++#define RX_CNTRL1_BCAST_DIS BIT(7)
++
++/* RX Control Register 2 */
++#define RX_CNTRL2_DEFER_EN BIT(0)
++
++/* Core Control Register */
++#define CORE_RESET BIT(0)
++#define CORE_RX_FIFO_FLUSH BIT(1)
++#define CORE_TX_FIFO_FLUSH BIT(2)
++#define CORE_SEND_JAM BIT(3)
++#define CORE_MDC_EN BIT(4)
++
++/* Definitions for MII access routines*/
++
++#define MII_REG_SHL 16
++#define MII_ADDR_SHL 21
++
++#define MII_GO BIT(31)
++#define MII_WRITE BIT(26)
++#define MII_READ_FAIL BIT(31)
++
++#define MII_TIMEOUT_10TH_SECS 5
++#define MII_10TH_SEC_IN_MILLIS 100
++
++/*
++ *
++ * Default values
++ *
++ */
++
++#define MAC_DEF_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)
++
++#define MAC_TX_CNTRL1_DEFAULT (\
++ TX_CNTRL1_TX_EN | \
++ TX_CNTRL1_RETRY | \
++ TX_CNTRL1_FCS_EN | \
++ TX_CNTRL1_2DEFER | \
++ TX_CNTRL1_PAD_EN )
++
++#define MAC_TX_MAX_RETRIES_DEFAULT 0x0f
++
++#define MAC_RX_CNTRL1_DEFAULT ( \
++ RX_CNTRL1_PADSTRIP_EN | \
++ RX_CNTRL1_CRC_EN | \
++ RX_CNTRL1_RX_EN )
++
++#define MAC_RX_CNTRL2_DEFAULT 0x0
++#define MAC_TX_CNTRL2_DEFAULT TX_CNTRL2_RETRIES_MASK
++
++/* Thresholds determined by NPE firmware FS */
++#define MAC_THRESH_P_EMPTY_DEFAULT 0x12
++#define MAC_THRESH_P_FULL_DEFAULT 0x30
++
++/* Number of bytes that must be in the tx fifo before
++ * transmission commences */
++#define MAC_BUF_SIZE_TX_DEFAULT 0x8
++
++/* One-part deferral values */
++#define MAC_TX_DEFER_DEFAULT 0x15
++#define MAC_RX_DEFER_DEFAULT 0x16
++
++/* Two-part deferral values... */
++#define MAC_TX_TWO_DEFER_1_DEFAULT 0x08
++#define MAC_TX_TWO_DEFER_2_DEFAULT 0x07
++
++/* This value applies to MII */
++#define MAC_SLOT_TIME_DEFAULT 0x80
++
++/* This value applies to RMII */
++#define MAC_SLOT_TIME_RMII_DEFAULT 0xFF
++
++#define MAC_ADDR_MASK_DEFAULT 0xFF
++
++#define MAC_INT_CLK_THRESH_DEFAULT 0x1
++/* The following is a value chosen at random */
++#define MAC_RANDOM_SEED_DEFAULT 0x8
++
++/* By default we must configure the MAC to generate the MDC clock*/
++#define CORE_DEFAULT (CORE_MDC_EN)
++
++/* End of Intel provided register information */
++
++extern int
++mdio_read_register(struct net_device *dev, int phy_addr, int phy_reg);
++extern void
++mdio_write_register(struct net_device *dev, int phy_addr, int phy_reg, int val);
++extern void init_mdio(struct net_device *dev, int phy_id);
++
++struct mac_info {
++ u32 __iomem *addr;
++ struct resource *res;
++ struct device *npe_dev;
++ struct net_device *netdev;
++ struct qm_qmgr *qmgr;
++ struct qm_queue *rxq;
++ struct qm_queue *txq;
++ struct qm_queue *rxdoneq;
++ u32 irqflags;
++ struct net_device_stats stat;
++ struct mii_if_info mii;
++ struct delayed_work mdio_thread;
++ int rxq_pkt;
++ int txq_pkt;
++ int unloading;
++ struct mac_plat_info *plat;
++ int npe_stat_num;
++ spinlock_t rx_lock;
++ u32 msg_enable;
++};
++
++static inline void mac_write_reg(struct mac_info *mac, int offset, u32 val)
++{
++ *(mac->addr + offset) = val;
++}
++static inline u32 mac_read_reg(struct mac_info *mac, int offset)
++{
++ return *(mac->addr + offset);
++}
++static inline void mac_set_regbit(struct mac_info *mac, int offset, u32 bit)
++{
++ mac_write_reg(mac, offset, mac_read_reg(mac, offset) | bit);
++}
++static inline void mac_reset_regbit(struct mac_info *mac, int offset, u32 bit)
++{
++ mac_write_reg(mac, offset, mac_read_reg(mac, offset) & ~bit);
++}
++
++static inline void mac_mdio_cmd_write(struct mac_info *mac, u32 cmd)
++{
++ int i;
++ for(i=0; i<4; i++) {
++ mac_write_reg(mac, MAC_MDIO_CMD + i, cmd & 0xff);
++ cmd >>=8;
++ }
++}
++
++#define mac_mdio_cmd_read(mac) mac_mdio_read((mac), MAC_MDIO_CMD)
++#define mac_mdio_status_read(mac) mac_mdio_read((mac), MAC_MDIO_STS)
++static inline u32 mac_mdio_read(struct mac_info *mac, int offset)
++{
++ int i;
++ u32 data = 0;
++ for(i=0; i<4; i++) {
++ data |= (mac_read_reg(mac, offset + i) & 0xff) << (i*8);
++ }
++ return data;
++}
++
++static inline u32 mdio_cmd(int phy_addr, int phy_reg)
++{
++ return phy_addr << MII_ADDR_SHL |
++ phy_reg << MII_REG_SHL |
++ MII_GO;
++}
++
++#define MAC_REG_LIST { \
++ MAC_TX_CNTRL1, MAC_TX_CNTRL2, \
++ MAC_RX_CNTRL1, MAC_RX_CNTRL2, \
++ MAC_RANDOM_SEED, MAC_THRESH_P_EMPTY, MAC_THRESH_P_FULL, \
++ MAC_BUF_SIZE_TX, MAC_TX_DEFER, MAC_RX_DEFER, \
++ MAC_TX_TWO_DEFER_1, MAC_TX_TWO_DEFER_2, MAC_SLOT_TIME, \
++ MAC_ADDR_MASK +0, MAC_ADDR_MASK +1, MAC_ADDR_MASK +2, \
++ MAC_ADDR_MASK +3, MAC_ADDR_MASK +4, MAC_ADDR_MASK +5, \
++ MAC_ADDR +0, MAC_ADDR +1, MAC_ADDR +2, \
++ MAC_ADDR +3, MAC_ADDR +4, MAC_ADDR +5, \
++ MAC_INT_CLK_THRESH, \
++ MAC_UNI_ADDR +0, MAC_UNI_ADDR +1, MAC_UNI_ADDR +2, \
++ MAC_UNI_ADDR +3, MAC_UNI_ADDR +4, MAC_UNI_ADDR +5, \
++ MAC_CORE_CNTRL \
++}
++
++#define NPE_STAT_NUM 34
++#define NPE_STAT_NUM_BASE 22
++#define NPE_Q_STAT_NUM 4
++
++#define NPE_Q_STAT_STRINGS \
++ {"RX ready to use queue len "}, \
++ {"RX received queue len "}, \
++ {"TX to be send queue len "}, \
++ {"TX done queue len "},
++
++#define NPE_STAT_STRINGS \
++ {"StatsAlignmentErrors "}, \
++ {"StatsFCSErrors "}, \
++ {"StatsInternalMacReceiveErrors "}, \
++ {"RxOverrunDiscards "}, \
++ {"RxLearnedEntryDiscards "}, \
++ {"RxLargeFramesDiscards "}, \
++ {"RxSTPBlockedDiscards "}, \
++ {"RxVLANTypeFilterDiscards "}, \
++ {"RxVLANIdFilterDiscards "}, \
++ {"RxInvalidSourceDiscards "}, \
++ {"RxBlackListDiscards "}, \
++ {"RxWhiteListDiscards "}, \
++ {"RxUnderflowEntryDiscards "}, \
++ {"StatsSingleCollisionFrames "}, \
++ {"StatsMultipleCollisionFrames "}, \
++ {"StatsDeferredTransmissions "}, \
++ {"StatsLateCollisions "}, \
++ {"StatsExcessiveCollsions "}, \
++ {"StatsInternalMacTransmitErrors"}, \
++ {"StatsCarrierSenseErrors "}, \
++ {"TxLargeFrameDiscards "}, \
++ {"TxVLANIdFilterDiscards "}, \
++\
++ {"RxValidFramesTotalOctets "}, \
++ {"RxUcastPkts "}, \
++ {"RxBcastPkts "}, \
++ {"RxMcastPkts "}, \
++ {"RxPkts64Octets "}, \
++ {"RxPkts65to127Octets "}, \
++ {"RxPkts128to255Octets "}, \
++ {"RxPkts256to511Octets "}, \
++ {"RxPkts512to1023Octets "}, \
++ {"RxPkts1024to1518Octets "}, \
++ {"RxInternalNPEReceiveErrors "}, \
++ {"TxInternalNPETransmitErrors "}
++
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/mac_driver.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/mac_driver.c 2007-02-21 02:24:46.000000000 -0800
+@@ -0,0 +1,850 @@
++/*
++ * mac_driver.c - provide a network interface for each MAC
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/dma-mapping.h>
++#include <linux/workqueue.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++
++
++#include <linux/ixp_qmgr.h>
++#include <linux/ixp_npe.h>
++#include "mac.h"
++
++#define MDIO_INTERVAL (3*HZ)
++#define RX_QUEUE_PREFILL 64
++#define TX_QUEUE_PREFILL 16
++
++#define IXMAC_NAME "ixp4xx_mac"
++#define IXMAC_VERSION "0.3.1"
++
++#define MAC_DEFAULT_REG(mac, name) \
++ mac_write_reg(mac, MAC_ ## name, MAC_ ## name ## _DEFAULT)
++
++#define TX_DONE_QID 31
++
++#define DMA_ALLOC_SIZE 2048
++#define DMA_HDR_SIZE (sizeof(struct npe_cont))
++#define DMA_BUF_SIZE (DMA_ALLOC_SIZE - DMA_HDR_SIZE)
++
++/* Since the NPEs use 1 Return Q for sent frames, we need a device
++ * independent return Q. We call it tx_doneq.
++ * It will be initialized during module load and uninitialized
++ * during module unload. Evil hack, but there is no choice :-(
++ */
++
++static struct qm_queue *tx_doneq = NULL;
++static int debug = -1;
++module_param(debug, int, 0);
++
++static int init_buffer(struct qm_queue *queue, int count)
++{
++ int i;
++ struct npe_cont *cont;
++
++ for (i=0; i<count; i++) {
++ cont = kmalloc(DMA_ALLOC_SIZE, GFP_KERNEL | GFP_DMA);
++ if (!cont)
++ goto err;
++
++ cont->phys = dma_map_single(queue->dev, cont, DMA_ALLOC_SIZE,
++ DMA_BIDIRECTIONAL);
++ if (dma_mapping_error(cont->phys))
++ goto err;
++
++ cont->data = cont+1;
++ /* now the buffer is on a 32 bit boundary.
++ * we add 2 bytes for good alignment to SKB */
++ cont->data+=2;
++ cont->eth.next = 0;
++ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE);
++ cont->eth.pkt_len = 0;
++ /* also add 2 alignment bytes from cont->data*/
++ cont->eth.phys_addr = cpu_to_npe32(cont->phys+ DMA_HDR_SIZE+ 2);
++
++ dma_sync_single(queue->dev, cont->phys, DMA_HDR_SIZE,
++ DMA_TO_DEVICE);
++
++ queue_put_entry(queue, cont->phys);
++ if (queue_stat(queue) == 2) { /* overflow */
++ dma_unmap_single(queue->dev, cont->phys, DMA_ALLOC_SIZE,
++ DMA_BIDIRECTIONAL);
++ goto err;
++ }
++ }
++ return i;
++err:
++ if (cont)
++ kfree(cont);
++ return i;
++}
++
++static int destroy_buffer(struct qm_queue *queue, int count)
++{
++ u32 phys;
++ int i;
++ struct npe_cont *cont;
++
++ for (i=0; i<count; i++) {
++ phys = queue_get_entry(queue) & ~0xf;
++ if (!phys)
++ break;
++ dma_unmap_single(queue->dev, phys, DMA_ALLOC_SIZE,
++ DMA_BIDIRECTIONAL);
++ cont = dma_to_virt(queue->dev, phys);
++ kfree(cont);
++ }
++ return i;
++}
++
++static void mac_init(struct mac_info *mac)
++{
++ MAC_DEFAULT_REG(mac, TX_CNTRL2);
++ MAC_DEFAULT_REG(mac, RANDOM_SEED);
++ MAC_DEFAULT_REG(mac, THRESH_P_EMPTY);
++ MAC_DEFAULT_REG(mac, THRESH_P_FULL);
++ MAC_DEFAULT_REG(mac, TX_DEFER);
++ MAC_DEFAULT_REG(mac, TX_TWO_DEFER_1);
++ MAC_DEFAULT_REG(mac, TX_TWO_DEFER_2);
++ MAC_DEFAULT_REG(mac, SLOT_TIME);
++ MAC_DEFAULT_REG(mac, INT_CLK_THRESH);
++ MAC_DEFAULT_REG(mac, BUF_SIZE_TX);
++ MAC_DEFAULT_REG(mac, TX_CNTRL1);
++ MAC_DEFAULT_REG(mac, RX_CNTRL1);
++}
++
++static void mac_set_uniaddr(struct net_device *dev)
++{
++ int i;
++ struct mac_info *mac = netdev_priv(dev);
++ struct npe_info *npe = dev_get_drvdata(mac->npe_dev);
++
++ /* check for multicast */
++ if (dev->dev_addr[0] & 1)
++ return;
++
++ npe_mh_setportaddr(npe, mac->plat, dev->dev_addr);
++ npe_mh_disable_firewall(npe, mac->plat);
++ for (i=0; i<dev->addr_len; i++)
++ mac_write_reg(mac, MAC_UNI_ADDR + i, dev->dev_addr[i]);
++}
++
++static void update_duplex_mode(struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ if (netif_msg_link(mac)) {
++ printk(KERN_DEBUG "Link of %s is %s-duplex\n", dev->name,
++ mac->mii.full_duplex ? "full" : "half");
++ }
++ if (mac->mii.full_duplex) {
++ mac_reset_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_DUPLEX);
++ } else {
++ mac_set_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_DUPLEX);
++ }
++}
++
++static int media_check(struct net_device *dev, int init)
++{
++ struct mac_info *mac = netdev_priv(dev);
++
++ if (mii_check_media(&mac->mii, netif_msg_link(mac), init)) {
++ update_duplex_mode(dev);
++ return 1;
++ }
++ return 0;
++}
++
++static void get_npe_stats(struct mac_info *mac, u32 *buf, int len, int reset)
++{
++ struct npe_info *npe = dev_get_drvdata(mac->npe_dev);
++ u32 phys;
++
++ memset(buf, len, 0);
++ phys = dma_map_single(mac->npe_dev, buf, len, DMA_BIDIRECTIONAL);
++ npe_mh_get_stats(npe, mac->plat, phys, reset);
++ dma_unmap_single(mac->npe_dev, phys, len, DMA_BIDIRECTIONAL);
++}
++
++static void irqcb_recv(struct qm_queue *queue)
++{
++ struct net_device *dev = queue->cb_data;
++
++ queue_ack_irq(queue);
++ queue_disable_irq(queue);
++ if (netif_running(dev))
++ netif_rx_schedule(dev);
++}
++
++int ix_recv(struct net_device *dev, int *budget, struct qm_queue *queue)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ struct sk_buff *skb;
++ u32 phys;
++ struct npe_cont *cont;
++
++ while (*budget > 0 && netif_running(dev) ) {
++ int len;
++ phys = queue_get_entry(queue) & ~0xf;
++ if (!phys)
++ break;
++ dma_sync_single(queue->dev, phys, DMA_HDR_SIZE,
++ DMA_FROM_DEVICE);
++ cont = dma_to_virt(queue->dev, phys);
++ len = npe_to_cpu16(cont->eth.pkt_len) -4; /* strip FCS */
++
++ if (unlikely(netif_msg_rx_status(mac))) {
++ printk(KERN_DEBUG "%s: RX packet size: %u\n",
++ dev->name, len);
++ queue_state(mac->rxq);
++ queue_state(mac->rxdoneq);
++ }
++ skb = dev_alloc_skb(len + 2);
++ if (likely(skb)) {
++ skb->dev = dev;
++ skb_reserve(skb, 2);
++ dma_sync_single(queue->dev, cont->eth.phys_addr, len,
++ DMA_FROM_DEVICE);
++#ifdef CONFIG_NPE_ADDRESS_COHERENT
++ /* swap the payload of the SKB */
++ {
++ u32 *t = (u32*)(skb->data-2);
++ u32 *s = (u32*)(cont->data-2);
++ int i, j = (len+5)/4;
++ for (i=0; i<j; i++)
++ t[i] = cpu_to_be32(s[i]);
++ }
++#else
++ eth_copy_and_sum(skb, cont->data, len, 0);
++#endif
++ skb_put(skb, len);
++ skb->protocol = eth_type_trans(skb, dev);
++ dev->last_rx = jiffies;
++ netif_receive_skb(skb);
++ mac->stat.rx_packets++;
++ mac->stat.rx_bytes += skb->len;
++ } else {
++ mac->stat.rx_dropped++;
++ }
++ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE);
++ cont->eth.pkt_len = 0;
++ dma_sync_single(queue->dev, phys, DMA_HDR_SIZE, DMA_TO_DEVICE);
++ queue_put_entry(mac->rxq, phys);
++ dev->quota--;
++ (*budget)--;
++ }
++
++ return !budget;
++}
++
++static int ix_poll(struct net_device *dev, int *budget)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ struct qm_queue *queue = mac->rxdoneq;
++
++ for (;;) {
++ if (ix_recv(dev, budget, queue))
++ return 1;
++ netif_rx_complete(dev);
++ queue_enable_irq(queue);
++ if (!queue_len(queue))
++ break;
++ queue_disable_irq(queue);
++ if (netif_rx_reschedule(dev, 0))
++ break;
++ }
++ return 0;
++}
++
++static void ixmac_set_rx_mode (struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ struct dev_mc_list *mclist;
++ u8 aset[dev->addr_len], aclear[dev->addr_len];
++ int i,j;
++
++ if (dev->flags & IFF_PROMISC) {
++ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_ADDR_FLTR_EN);
++ } else {
++ mac_set_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_ADDR_FLTR_EN);
++
++ mclist = dev->mc_list;
++ memset(aset, 0xff, dev->addr_len);
++ memset(aclear, 0x00, dev->addr_len);
++ for (i = 0; mclist && i < dev->mc_count; i++) {
++ for (j=0; j< dev->addr_len; j++) {
++ aset[j] &= mclist->dmi_addr[j];
++ aclear[j] |= mclist->dmi_addr[j];
++ }
++ mclist = mclist->next;
++ }
++ for (j=0; j< dev->addr_len; j++) {
++ aclear[j] = aset[j] | ~aclear[j];
++ }
++ for (i=0; i<dev->addr_len; i++) {
++ mac_write_reg(mac, MAC_ADDR + i, aset[i]);
++ mac_write_reg(mac, MAC_ADDR_MASK + i, aclear[i]);
++ }
++ }
++}
++
++static int ixmac_open (struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ struct npe_info *npe = dev_get_drvdata(mac->npe_dev);
++ u32 buf[NPE_STAT_NUM];
++ int i;
++ u32 phys;
++
++ /* first check if the NPE is up and running */
++ if (!( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN)) {
++ printk(KERN_ERR "%s: %s not running\n", dev->name,
++ npe->plat->name);
++ return -EIO;
++ }
++ if (npe_mh_status(npe)) {
++ printk(KERN_ERR "%s: %s not responding\n", dev->name,
++ npe->plat->name);
++ return -EIO;
++ }
++ mac->txq_pkt += init_buffer(mac->txq, TX_QUEUE_PREFILL - mac->txq_pkt);
++ mac->rxq_pkt += init_buffer(mac->rxq, RX_QUEUE_PREFILL - mac->rxq_pkt);
++
++ queue_enable_irq(mac->rxdoneq);
++
++ /* drain all buffers from then RX-done-q to make the IRQ happen */
++ while ((phys = queue_get_entry(mac->rxdoneq) & ~0xf)) {
++ struct npe_cont *cont;
++ cont = dma_to_virt(mac->rxdoneq->dev, phys);
++ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE);
++ cont->eth.pkt_len = 0;
++ dma_sync_single(mac->rxdoneq->dev, phys, DMA_HDR_SIZE,
++ DMA_TO_DEVICE);
++ queue_put_entry(mac->rxq, phys);
++ }
++ mac_init(mac);
++ npe_mh_set_rxqid(npe, mac->plat, mac->plat->rxdoneq_id);
++ get_npe_stats(mac, buf, sizeof(buf), 1); /* reset stats */
++ get_npe_stats(mac, buf, sizeof(buf), 0);
++ /*
++ * if the extended stats contain random values
++ * the NPE image lacks extendet statistic counters
++ */
++ for (i=NPE_STAT_NUM_BASE; i<NPE_STAT_NUM; i++) {
++ if (buf[i] >10000)
++ break;
++ }
++ mac->npe_stat_num = i<NPE_STAT_NUM ? NPE_STAT_NUM_BASE : NPE_STAT_NUM;
++ mac->npe_stat_num += NPE_Q_STAT_NUM;
++
++ mac_set_uniaddr(dev);
++ media_check(dev, 1);
++ ixmac_set_rx_mode(dev);
++ netif_start_queue(dev);
++ schedule_delayed_work(&mac->mdio_thread, MDIO_INTERVAL);
++ if (netif_msg_ifup(mac)) {
++ printk(KERN_DEBUG "%s: open " IXMAC_NAME
++ " RX queue %d bufs, TX queue %d bufs\n",
++ dev->name, mac->rxq_pkt, mac->txq_pkt);
++ }
++ return 0;
++}
++
++static int ixmac_start_xmit (struct sk_buff *skb, struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ struct npe_cont *cont;
++ u32 phys;
++ struct qm_queue *queue = mac->txq;
++
++ if (unlikely(skb->len > DMA_BUF_SIZE)) {
++ dev_kfree_skb(skb);
++ mac->stat.tx_errors++;
++ return NETDEV_TX_OK;
++ }
++ phys = queue_get_entry(tx_doneq) & ~0xf;
++ if (!phys)
++ goto busy;
++ cont = dma_to_virt(queue->dev, phys);
++#ifdef CONFIG_NPE_ADDRESS_COHERENT
++ /* swap the payload of the SKB */
++ {
++ u32 *s = (u32*)(skb->data-2);
++ u32 *t = (u32*)(cont->data-2);
++ int i,j = (skb->len+5) / 4;
++ for (i=0; i<j; i++)
++ t[i] = cpu_to_be32(s[i]);
++ }
++#else
++ //skb_copy_and_csum_dev(skb, cont->data);
++ memcpy(cont->data, skb->data, skb->len);
++#endif
++ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE);
++ cont->eth.pkt_len = cpu_to_npe16(skb->len);
++ /* disable VLAN functions in NPE image for now */
++ cont->eth.flags = 0;
++ dma_sync_single(queue->dev, phys, skb->len + DMA_HDR_SIZE,
++ DMA_TO_DEVICE);
++ queue_put_entry(queue, phys);
++ if (queue_stat(queue) == 2) { /* overflow */
++ queue_put_entry(tx_doneq, phys);
++ goto busy;
++ }
++ dev_kfree_skb(skb);
++
++ mac->stat.tx_packets++;
++ mac->stat.tx_bytes += skb->len;
++ dev->trans_start = jiffies;
++ if (netif_msg_tx_queued(mac)) {
++ printk(KERN_DEBUG "%s: TX packet size %u\n",
++ dev->name, skb->len);
++ queue_state(mac->txq);
++ queue_state(tx_doneq);
++ }
++ return NETDEV_TX_OK;
++busy:
++ return NETDEV_TX_BUSY;
++}
++
++static int ixmac_close (struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++
++ netif_stop_queue (dev);
++ queue_disable_irq(mac->rxdoneq);
++
++ mac->txq_pkt -= destroy_buffer(tx_doneq, mac->txq_pkt);
++ mac->rxq_pkt -= destroy_buffer(mac->rxq, mac->rxq_pkt);
++
++ cancel_rearming_delayed_work(&(mac->mdio_thread));
++
++ if (netif_msg_ifdown(mac)) {
++ printk(KERN_DEBUG "%s: close " IXMAC_NAME
++ " RX queue %d bufs, TX queue %d bufs\n",
++ dev->name, mac->rxq_pkt, mac->txq_pkt);
++ }
++ return 0;
++}
++
++static int ixmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ int rc, duplex_changed;
++
++ if (!netif_running(dev))
++ return -EINVAL;
++ if (!try_module_get(THIS_MODULE))
++ return -ENODEV;
++ rc = generic_mii_ioctl(&mac->mii, if_mii(rq), cmd, &duplex_changed);
++ module_put(THIS_MODULE);
++ if (duplex_changed)
++ update_duplex_mode(dev);
++ return rc;
++}
++
++static struct net_device_stats *ixmac_stats (struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ return &mac->stat;
++}
++
++static void ixmac_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ struct npe_info *npe = dev_get_drvdata(mac->npe_dev);
++
++ strcpy(info->driver, IXMAC_NAME);
++ strcpy(info->version, IXMAC_VERSION);
++ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
++ snprintf(info->fw_version, 32, "%d.%d func [%d]",
++ npe->img_info[2], npe->img_info[3], npe->img_info[1]);
++ }
++ strncpy(info->bus_info, npe->plat->name, ETHTOOL_BUSINFO_LEN);
++}
++
++static int ixmac_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ mii_ethtool_gset(&mac->mii, cmd);
++ return 0;
++}
++
++static int ixmac_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ int rc;
++ rc = mii_ethtool_sset(&mac->mii, cmd);
++ return rc;
++}
++
++static int ixmac_nway_reset(struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ return mii_nway_restart(&mac->mii);
++}
++
++static u32 ixmac_get_link(struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ return mii_link_ok(&mac->mii);
++}
++
++static const int mac_reg_list[] = MAC_REG_LIST;
++
++static int ixmac_get_regs_len(struct net_device *dev)
++{
++ return ARRAY_SIZE(mac_reg_list);
++}
++
++static void
++ixmac_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
++{
++ int i;
++ struct mac_info *mac = netdev_priv(dev);
++ u8 *buf = regbuf;
++
++ for (i=0; i<regs->len; i++) {
++ buf[i] = mac_read_reg(mac, mac_reg_list[i]);
++ }
++}
++
++static struct {
++ const char str[ETH_GSTRING_LEN];
++} ethtool_stats_keys[NPE_STAT_NUM + NPE_Q_STAT_NUM] = {
++ NPE_Q_STAT_STRINGS
++ NPE_STAT_STRINGS
++};
++
++static void ixmac_get_strings(struct net_device *dev, u32 stringset, u8 *data)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ memcpy(data, ethtool_stats_keys, mac->npe_stat_num * ETH_GSTRING_LEN);
++}
++
++static int ixmac_get_stats_count(struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ return mac->npe_stat_num;
++}
++
++static u32 ixmac_get_msglevel(struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ return mac->msg_enable;
++}
++
++static void ixmac_set_msglevel(struct net_device *dev, u32 datum)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ mac->msg_enable = datum;
++}
++
++static void ixmac_get_ethtool_stats(struct net_device *dev,
++ struct ethtool_stats *stats, u64 *data)
++{
++ int i;
++ struct mac_info *mac = netdev_priv(dev);
++ u32 buf[NPE_STAT_NUM];
++
++ data[0] = queue_len(mac->rxq);
++ data[1] = queue_len(mac->rxdoneq);
++ data[2] = queue_len(mac->txq);
++ data[3] = queue_len(tx_doneq);
++
++ get_npe_stats(mac, buf, sizeof(buf), 0);
++
++ for (i=0; i<stats->n_stats-4; i++) {
++ data[i+4] = npe_to_cpu32(buf[i]);
++ }
++}
++
++static struct ethtool_ops ixmac_ethtool_ops = {
++ .get_drvinfo = ixmac_get_drvinfo,
++ .get_settings = ixmac_get_settings,
++ .set_settings = ixmac_set_settings,
++ .nway_reset = ixmac_nway_reset,
++ .get_link = ixmac_get_link,
++ .get_msglevel = ixmac_get_msglevel,
++ .set_msglevel = ixmac_set_msglevel,
++ .get_regs_len = ixmac_get_regs_len,
++ .get_regs = ixmac_get_regs,
++ .get_perm_addr = ethtool_op_get_perm_addr,
++ .get_strings = ixmac_get_strings,
++ .get_stats_count = ixmac_get_stats_count,
++ .get_ethtool_stats = ixmac_get_ethtool_stats,
++};
++
++static void mac_mdio_thread(struct work_struct *work)
++{
++ struct mac_info *mac = container_of(work, struct mac_info,
++ mdio_thread.work);
++ struct net_device *dev = mac->netdev;
++
++ media_check(dev, 0);
++ schedule_delayed_work(&mac->mdio_thread, MDIO_INTERVAL);
++}
++
++static int mac_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ struct mac_info *mac;
++ struct net_device *dev;
++ struct npe_info *npe;
++ struct mac_plat_info *plat = pdev->dev.platform_data;
++ int size, ret;
++
++ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0))) {
++ return -EIO;
++ }
++ if (!(dev = alloc_etherdev (sizeof(struct mac_info)))) {
++ return -ENOMEM;
++ }
++ SET_MODULE_OWNER(dev);
++ SET_NETDEV_DEV(dev, &pdev->dev);
++ mac = netdev_priv(dev);
++ mac->netdev = dev;
++
++ size = res->end - res->start +1;
++ mac->res = request_mem_region(res->start, size, IXMAC_NAME);
++ if (!mac->res) {
++ ret = -EBUSY;
++ goto out_free;
++ }
++
++ mac->addr = ioremap(res->start, size);
++ if (!mac->addr) {
++ ret = -ENOMEM;
++ goto out_rel;
++ }
++
++ dev->open = ixmac_open;
++ dev->hard_start_xmit = ixmac_start_xmit;
++ dev->poll = ix_poll;
++ dev->stop = ixmac_close;
++ dev->get_stats = ixmac_stats;
++ dev->do_ioctl = ixmac_ioctl;
++ dev->set_multicast_list = ixmac_set_rx_mode;
++ dev->ethtool_ops = &ixmac_ethtool_ops;
++
++ dev->weight = 16;
++ dev->tx_queue_len = 100;
++
++ mac->npe_dev = get_npe_by_id(plat->npe_id);
++ if (!mac->npe_dev) {
++ ret = -EIO;
++ goto out_unmap;
++ }
++ npe = dev_get_drvdata(mac->npe_dev);
++
++ mac->rxq = request_queue(plat->rxq_id, 128);
++ if (IS_ERR(mac->rxq)) {
++ printk(KERN_ERR "Error requesting Q: %d\n", plat->rxq_id);
++ ret = -EBUSY;
++ goto out_putmod;
++ }
++ mac->txq = request_queue(plat->txq_id, 128);
++ if (IS_ERR(mac->txq)) {
++ printk(KERN_ERR "Error requesting Q: %d\n", plat->txq_id);
++ ret = -EBUSY;
++ goto out_putmod;
++ }
++ mac->rxdoneq = request_queue(plat->rxdoneq_id, 128);
++ if (IS_ERR(mac->rxdoneq)) {
++ printk(KERN_ERR "Error requesting Q: %d\n", plat->rxdoneq_id);
++ ret = -EBUSY;
++ goto out_putmod;
++ }
++ mac->rxdoneq->irq_cb = irqcb_recv;
++ mac->rxdoneq->cb_data = dev;
++ queue_set_watermarks(mac->rxdoneq, 0, 0);
++ queue_set_irq_src(mac->rxdoneq, Q_IRQ_ID_NOT_E);
++
++ mac->qmgr = dev_get_drvdata(mac->rxq->dev);
++ if (register_netdev (dev)) {
++ ret = -EIO;
++ goto out_putmod;
++ }
++
++ mac->plat = plat;
++ mac->npe_stat_num = NPE_STAT_NUM_BASE;
++ mac->msg_enable = netif_msg_init(debug, MAC_DEF_MSG_ENABLE);
++
++ platform_set_drvdata(pdev, dev);
++
++ mac_write_reg(mac, MAC_CORE_CNTRL, CORE_RESET);
++ udelay(500);
++ mac_write_reg(mac, MAC_CORE_CNTRL, CORE_MDC_EN);
++
++ init_mdio(dev, plat->phy_id);
++
++ INIT_DELAYED_WORK(&mac->mdio_thread, mac_mdio_thread);
++
++ /* The place of the MAC address is very system dependent.
++ * Here we use a random one to be replaced by one of the
++ * following commands:
++ * "ip link set address 02:03:04:04:04:01 dev eth0"
++ * "ifconfig eth0 hw ether 02:03:04:04:04:07"
++ */
++
++ if (is_zero_ether_addr(plat->hwaddr)) {
++ random_ether_addr(dev->dev_addr);
++ dev->dev_addr[5] = plat->phy_id;
++ }
++ else
++ memcpy(dev->dev_addr, plat->hwaddr, 6);
++
++ printk(KERN_INFO IXMAC_NAME " driver " IXMAC_VERSION
++ ": %s on %s with PHY[%d] initialized\n",
++ dev->name, npe->plat->name, plat->phy_id);
++
++ return 0;
++
++out_putmod:
++ if (mac->rxq)
++ release_queue(mac->rxq);
++ if (mac->txq)
++ release_queue(mac->txq);
++ if (mac->rxdoneq)
++ release_queue(mac->rxdoneq);
++ module_put(mac->npe_dev->driver->owner);
++out_unmap:
++ iounmap(mac->addr);
++out_rel:
++ release_resource(mac->res);
++out_free:
++ kfree(mac);
++ return ret;
++}
++
++static void drain_npe(struct mac_info *mac)
++{
++ struct npe_info *npe = dev_get_drvdata(mac->npe_dev);
++ struct npe_cont *cont;
++ u32 phys;
++ int loop = 0;
++
++ /* Now there are some skb hold by the NPE.
++ * We switch the MAC in loopback mode and send a pseudo packet
++ * that will be returned by the NPE in its last SKB.
++ * We will also try to isolate the PHY to keep the packets internal.
++ */
++
++ if (mac->txq_pkt <2)
++ mac->txq_pkt += init_buffer(tx_doneq, 5);
++
++ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
++ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_MDC_EN);
++ mac_set_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_LOOP_EN);
++
++ npe_mh_npe_loopback_mode(npe, mac->plat, 1);
++ mdelay(200);
++
++ while (mac->rxq_pkt && loop++ < 2000 ) {
++ phys = queue_get_entry(tx_doneq) & ~0xf;
++ if (!phys)
++ break;
++ cont = dma_to_virt(queue->dev, phys);
++ /* actually the packets should never leave the system,
++ * but if they do, they shall contain 0s instead of
++ * intresting random data....
++ */
++ memset(cont->data, 0, 64);
++ cont->eth.pkt_len = 64;
++ dma_sync_single(mac->txq->dev, phys, 64 + DMA_HDR_SIZE,
++ DMA_TO_DEVICE);
++ queue_put_entry(mac->txq, phys);
++ if (queue_stat(mac->txq) == 2) { /* overflow */
++ queue_put_entry(tx_doneq, phys);
++ break;
++ }
++ mdelay(1);
++ mac->rxq_pkt -= destroy_buffer(mac->rxdoneq,
++ mac->rxq_pkt);
++ }
++ npe_mh_npe_loopback_mode(npe, mac->plat, 0);
++ }
++ /* Flush MAC TX fifo to drain the bogus packages */
++ mac_set_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH);
++ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_RX_EN);
++ mac_reset_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_TX_EN);
++ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_LOOP_EN);
++ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH);
++ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH);
++}
++
++static int mac_remove(struct platform_device *pdev)
++{
++ struct net_device* dev = platform_get_drvdata(pdev);
++ struct mac_info *mac = netdev_priv(dev);
++
++ unregister_netdev(dev);
++
++ mac->rxq_pkt -= destroy_buffer(mac->rxq, mac->rxq_pkt);
++ if (mac->rxq_pkt)
++ drain_npe(mac);
++
++ mac->txq_pkt -= destroy_buffer(mac->txq, mac->txq_pkt);
++ mac->txq_pkt -= destroy_buffer(tx_doneq, mac->txq_pkt);
++
++ if (mac->rxq_pkt || mac->txq_pkt)
++ printk("Buffers lost in NPE: RX:%d, TX:%d\n",
++ mac->rxq_pkt, mac->txq_pkt);
++
++ release_queue(mac->txq);
++ release_queue(mac->rxq);
++ release_queue(mac->rxdoneq);
++
++ flush_scheduled_work();
++ return_npe_dev(mac->npe_dev);
++
++ iounmap(mac->addr);
++ release_resource(mac->res);
++ platform_set_drvdata(pdev, NULL);
++ free_netdev(dev);
++ return 0;
++}
++
++static struct platform_driver ixp4xx_mac = {
++ .driver.name = IXMAC_NAME,
++ .probe = mac_probe,
++ .remove = mac_remove,
++};
++
++static int __init init_mac(void)
++{
++ /* The TX done Queue handles skbs sent out by the NPE */
++ tx_doneq = request_queue(TX_DONE_QID, 128);
++ if (IS_ERR(tx_doneq)) {
++ printk(KERN_ERR "Error requesting Q: %d\n", TX_DONE_QID);
++ return -EBUSY;
++ }
++ return platform_driver_register(&ixp4xx_mac);
++}
++
++static void __exit finish_mac(void)
++{
++ platform_driver_unregister(&ixp4xx_mac);
++ if (tx_doneq) {
++ release_queue(tx_doneq);
++ }
++}
++
++module_init(init_mac);
++module_exit(finish_mac);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
++
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/npe.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/npe.c 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,291 @@
++
++#include <linux/ixp_npe.h>
++#include <asm/hardware.h>
++
++#define RESET_NPE_PARITY 0x0800
++#define PARITY_BIT_MASK 0x3F00FFFF
++#define CONFIG_CTRL_REG_MASK 0x3F3FFFFF
++#define MAX_RETRIES 1000000
++#define NPE_PHYS_REG 32
++#define RESET_MBST_VAL 0x0000F0F0
++#define NPE_REGMAP 0x0000001E
++#define INSTR_WR_REG_SHORT 0x0000C000
++#define INSTR_WR_REG_BYTE 0x00004000
++#define MASK_ECS_REG_0_NEXTPC 0x1FFF0000
++
++#define INSTR_RD_FIFO 0x0F888220
++#define INSTR_RESET_MBOX 0x0FAC8210
++
++#define ECS_REG_0_LDUR 8
++#define ECS_REG_1_CCTXT 16
++#define ECS_REG_1_SELCTXT 0
++
++#define ECS_BG_CTXT_REG_0 0x00
++#define ECS_BG_CTXT_REG_1 0x01
++#define ECS_BG_CTXT_REG_2 0x02
++#define ECS_PRI_1_CTXT_REG_0 0x04
++#define ECS_PRI_1_CTXT_REG_1 0x05
++#define ECS_PRI_1_CTXT_REG_2 0x06
++#define ECS_PRI_2_CTXT_REG_0 0x08
++#define ECS_PRI_2_CTXT_REG_1 0x09
++#define ECS_PRI_2_CTXT_REG_2 0x0A
++#define ECS_DBG_CTXT_REG_0 0x0C
++#define ECS_DBG_CTXT_REG_1 0x0D
++#define ECS_DBG_CTXT_REG_2 0x0E
++#define ECS_INSTRUCT_REG 0x11
++
++#define ECS_BG_CTXT_REG_0_RESET 0xA0000000
++#define ECS_BG_CTXT_REG_1_RESET 0x01000000
++#define ECS_BG_CTXT_REG_2_RESET 0x00008000
++#define ECS_PRI_1_CTXT_REG_0_RESET 0x20000080
++#define ECS_PRI_1_CTXT_REG_1_RESET 0x01000000
++#define ECS_PRI_1_CTXT_REG_2_RESET 0x00008000
++#define ECS_PRI_2_CTXT_REG_0_RESET 0x20000080
++#define ECS_PRI_2_CTXT_REG_1_RESET 0x01000000
++#define ECS_PRI_2_CTXT_REG_2_RESET 0x00008000
++#define ECS_DBG_CTXT_REG_0_RESET 0x20000000
++#define ECS_DBG_CTXT_REG_1_RESET 0x00000000
++#define ECS_DBG_CTXT_REG_2_RESET 0x001E0000
++#define ECS_INSTRUCT_REG_RESET 0x1003C00F
++
++static struct { u32 reg; u32 val; } ecs_reset[] =
++{
++ { ECS_BG_CTXT_REG_0, ECS_BG_CTXT_REG_0_RESET },
++ { ECS_BG_CTXT_REG_1, ECS_BG_CTXT_REG_1_RESET },
++ { ECS_BG_CTXT_REG_2, ECS_BG_CTXT_REG_2_RESET },
++ { ECS_PRI_1_CTXT_REG_0, ECS_PRI_1_CTXT_REG_0_RESET },
++ { ECS_PRI_1_CTXT_REG_1, ECS_PRI_1_CTXT_REG_1_RESET },
++ { ECS_PRI_1_CTXT_REG_2, ECS_PRI_1_CTXT_REG_2_RESET },
++ { ECS_PRI_2_CTXT_REG_0, ECS_PRI_2_CTXT_REG_0_RESET },
++ { ECS_PRI_2_CTXT_REG_1, ECS_PRI_2_CTXT_REG_1_RESET },
++ { ECS_PRI_2_CTXT_REG_2, ECS_PRI_2_CTXT_REG_2_RESET },
++ { ECS_DBG_CTXT_REG_0, ECS_DBG_CTXT_REG_0_RESET },
++ { ECS_DBG_CTXT_REG_1, ECS_DBG_CTXT_REG_1_RESET },
++ { ECS_DBG_CTXT_REG_2, ECS_DBG_CTXT_REG_2_RESET },
++ { ECS_INSTRUCT_REG, ECS_INSTRUCT_REG_RESET }
++};
++
++/* actually I have no idea what I'm doing here !!
++ * I only rewrite the "reset" sequence the way Intel does it.
++ */
++
++static void npe_debg_preexec(struct npe_info *npe)
++{
++ u32 r = IX_NPEDL_MASK_ECS_DBG_REG_2_IF | IX_NPEDL_MASK_ECS_DBG_REG_2_IE;
++
++ npe->exec_count = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXCT);
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCT, 0);
++ npe->ctx_reg2 = npe_read_ecs_reg(npe, ECS_DBG_CTXT_REG_2);
++ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_2, npe->ctx_reg2 | r);
++}
++
++static void npe_debg_postexec(struct npe_info *npe)
++{
++ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_0, 0);
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCT, npe->exec_count);
++ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_2, npe->ctx_reg2);
++}
++
++static int
++npe_debg_inst_exec(struct npe_info *npe, u32 instr, u32 ctx, u32 ldur)
++{
++ u32 regval, wc;
++ int c = 0;
++
++ regval = IX_NPEDL_MASK_ECS_REG_0_ACTIVE |
++ (ldur << ECS_REG_0_LDUR);
++ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_0 , regval);
++ /* set CCTXT at ECS DEBUG L3 to specify in which context
++ * to execute the instruction
++ */
++ regval = (ctx << ECS_REG_1_CCTXT) |
++ (ctx << ECS_REG_1_SELCTXT);
++ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_1, regval);
++
++ /* clear the pipeline */
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
++
++ /* load NPE instruction into the instruction register */
++ npe_write_ecs_reg(npe, ECS_INSTRUCT_REG, instr);
++ /* we need this value later to wait for
++ * completion of NPE execution step
++ */
++ wc = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_WC);
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_STEP);
++
++ /* Watch Count register increments when NPE completes an instruction */
++ while (wc == npe_reg_read(npe, IX_NPEDL_REG_OFFSET_WC) &&
++ ++c < MAX_RETRIES);
++
++ if (c >= MAX_RETRIES) {
++ printk(KERN_ERR "%s reset:npe_debg_inst_exec(): Timeout\n",
++ npe->plat->name);
++ return 1;
++ }
++ return 0;
++}
++
++static int npe_logical_reg_write8(struct npe_info *npe, u32 addr, u32 val)
++{
++ u32 instr;
++ val &= 0xff;
++ /* here we build the NPE assembler instruction:
++ * mov8 d0, #0 */
++ instr = INSTR_WR_REG_BYTE | /* OpCode */
++ addr << 9 | /* base Operand */
++ (val & 0x1f) << 4 | /* lower 5 bits to immediate data */
++ (val & ~0x1f) << (18-5);/* higher 3 bits to CoProc instr. */
++ /* and execute it */
++ return npe_debg_inst_exec(npe, instr, 0, 1);
++}
++
++static int npe_logical_reg_write16(struct npe_info *npe, u32 addr, u32 val)
++{
++ u32 instr;
++ /* here we build the NPE assembler instruction:
++ * mov16 d0, #0 */
++ val &= 0xffff;
++ instr = INSTR_WR_REG_SHORT | /* OpCode */
++ addr << 9 | /* base Operand */
++ (val & 0x1f) << 4 | /* lower 5 bits to immediate data */
++ (val & ~0x1f) << (18-5);/* higher 11 bits to CoProc instr. */
++ /* and execute it */
++ return npe_debg_inst_exec(npe, instr, 0, 1);
++}
++
++static int npe_logical_reg_write32(struct npe_info *npe, u32 addr, u32 val)
++{
++ /* write in 16 bit steps first the high and then the low value */
++ npe_logical_reg_write16(npe, addr, val >> 16);
++ return npe_logical_reg_write16(npe, addr+2, val & 0xffff);
++}
++
++void npe_reset(struct npe_info *npe)
++{
++ u32 reg, cfg_ctrl;
++ int i;
++ struct { u32 reset; int addr; int size; } ctx_reg[] = {
++ { 0x80, 0x1b, 8 },
++ { 0, 0x1c, 16 },
++ { 0x820, 0x1e, 16 },
++ { 0, 0x1f, 8 }
++ }, *cr;
++
++ cfg_ctrl = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_CTL);
++ cfg_ctrl |= 0x3F000000;
++ /* disable the parity interrupt */
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_CTL, cfg_ctrl & PARITY_BIT_MASK);
++
++ npe_debg_preexec(npe);
++
++ /* clear the FIFOs */
++ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_WFIFO) ==
++ IX_NPEDL_MASK_WFIFO_VALID);
++ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) ==
++ IX_NPEDL_MASK_STAT_OFNE)
++ {
++ u32 reg;
++ reg = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_FIFO);
++ printk("%s reset: Read FIFO:=%x\n", npe->plat->name, reg);
++ }
++ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) ==
++ IX_NPEDL_MASK_STAT_IFNE) {
++ npe_debg_inst_exec(npe, INSTR_RD_FIFO, 0, 0);
++ }
++
++ /* Reset the mailbox reg */
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_MBST, RESET_MBST_VAL);
++ npe_debg_inst_exec(npe, INSTR_RESET_MBOX, 0, 0);
++
++ /* Reset the physical registers in the NPE register file */
++ for (i=0; i<NPE_PHYS_REG; i++) {
++ npe_logical_reg_write16(npe, NPE_REGMAP, i >> 1);
++ npe_logical_reg_write32(npe, (i&1) *4, 0);
++ }
++
++ /* Reset the context store. Iterate over the 16 ctx s */
++ for(i=0; i<16; i++) {
++ for (reg=0; reg<4; reg++) {
++ /* There is no (STEVT) register for Context 0.
++ * ignore if register=0 and ctx=0 */
++ if (!(reg || i))
++ continue;
++ /* Context 0 has no STARTPC. Instead, this value is
++ * used to set NextPC for Background ECS,
++ * to set where NPE starts executing code
++ */
++ if (!i && reg==1) {
++ u32 r;
++ r = npe_read_ecs_reg(npe, ECS_BG_CTXT_REG_0);
++ r &= ~MASK_ECS_REG_0_NEXTPC;
++ r |= (cr->reset << 16) & MASK_ECS_REG_0_NEXTPC;
++ continue;
++ }
++ cr = ctx_reg + reg;
++ switch (cr->size) {
++ case 8:
++ npe_logical_reg_write8(npe, cr->addr,
++ cr->reset);
++ break;
++ case 16:
++ npe_logical_reg_write16(npe, cr->addr,
++ cr->reset);
++ }
++ }
++ }
++ npe_debg_postexec(npe);
++
++ for (i=0; i< ARRAY_SIZE(ecs_reset); i++) {
++ npe_write_ecs_reg(npe, ecs_reset[i].reg, ecs_reset[i].val);
++ }
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT);
++
++ for (i=IX_NPEDL_REG_OFFSET_EXCT; i<=IX_NPEDL_REG_OFFSET_AP3; i+=4) {
++ npe_reg_write(npe, i, 0);
++ }
++
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_WC, 0);
++
++ reg = *IXP4XX_EXP_CFG2;
++ reg |= 0x800 << npe->plat->id; /* IX_FUSE_NPE[ABC] */
++ *IXP4XX_EXP_CFG2 = reg;
++ reg &= ~(0x800 << npe->plat->id); /* IX_FUSE_NPE[ABC] */
++ *IXP4XX_EXP_CFG2 = reg;
++
++ npe_stop(npe);
++
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_CTL,
++ cfg_ctrl & CONFIG_CTRL_REG_MASK);
++ npe->loaded = 0;
++}
++
++
++void npe_stop(struct npe_info *npe)
++{
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_STOP);
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
++}
++
++static void npe_reset_active(struct npe_info *npe, u32 reg)
++{
++ u32 regval;
++
++ regval = npe_read_ecs_reg(npe, reg);
++ regval &= ~IX_NPEDL_MASK_ECS_REG_0_ACTIVE;
++ npe_write_ecs_reg(npe, reg, regval);
++}
++
++void npe_start(struct npe_info *npe)
++{
++ npe_reset_active(npe, IX_NPEDL_ECS_PRI_1_CTXT_REG_0);
++ npe_reset_active(npe, IX_NPEDL_ECS_PRI_2_CTXT_REG_0);
++ npe_reset_active(npe, IX_NPEDL_ECS_DBG_CTXT_REG_0);
++
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_START);
++}
++
++EXPORT_SYMBOL(npe_stop);
++EXPORT_SYMBOL(npe_start);
++EXPORT_SYMBOL(npe_reset);
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/npe_mh.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/npe_mh.c 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,170 @@
++/*
++ * npe_mh.c - NPE message handler.
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#include <linux/ixp_npe.h>
++#include <linux/slab.h>
++
++#define MAX_RETRY 200
++
++struct npe_mh_msg {
++ union {
++ u8 byte[8]; /* Very desciptive name, I know ... */
++ u32 data[2];
++ } u;
++};
++
++/*
++ * The whole code in this function must be reworked.
++ * It is in a state that works but is not rock solid
++ */
++static int send_message(struct npe_info *npe, struct npe_mh_msg *msg)
++{
++ int i,j;
++ u32 send[2], recv[2];
++
++ for (i=0; i<2; i++)
++ send[i] = be32_to_cpu(msg->u.data[i]);
++
++ if ((npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) &
++ IX_NPEMH_NPE_STAT_IFNE))
++ return -1;
++
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_FIFO, send[0]);
++ for(i=0; i<MAX_RETRY; i++) {
++ /* if the IFNF status bit is unset then the inFIFO is full */
++ if (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) &
++ IX_NPEMH_NPE_STAT_IFNF)
++ break;
++ }
++ if (i>=MAX_RETRY)
++ return -1;
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_FIFO, send[1]);
++ i=0;
++ while (!(npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) &
++ IX_NPEMH_NPE_STAT_OFNE)) {
++ if (i++>MAX_RETRY) {
++ printk("Waiting for Output FIFO NotEmpty failed\n");
++ return -1;
++ }
++ }
++ //printk("Output FIFO Not Empty. Loops: %d\n", i);
++ j=0;
++ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) &
++ IX_NPEMH_NPE_STAT_OFNE) {
++ recv[j&1] = npe_reg_read(npe,IX_NPEDL_REG_OFFSET_FIFO);
++ j++;
++ }
++ if ((recv[0] != send[0]) || (recv[1] != send[1])) {
++ if (send[0] || send[1]) {
++ /* all CMDs return the complete message as answer,
++ * only GETSTATUS returns the ImageID of the NPE
++ */
++ printk("Unexpected answer: "
++ "Send %08x:%08x Ret %08x:%08x\n",
++ send[0], send[1], recv[0], recv[1]);
++ }
++ }
++ return 0;
++}
++
++#define CMD 0
++#define PORT 1
++#define MAC 2
++
++#define IX_ETHNPE_NPE_GETSTATUS 0x00
++#define IX_ETHNPE_EDB_SETPORTADDRESS 0x01
++#define IX_ETHNPE_GETSTATS 0x04
++#define IX_ETHNPE_RESETSTATS 0x05
++#define IX_ETHNPE_FW_SETFIREWALLMODE 0x0E
++#define IX_ETHNPE_VLAN_SETRXQOSENTRY 0x0B
++#define IX_ETHNPE_SETLOOPBACK_MODE 0x12
++
++#define logical_id(mp) (((mp)->npe_id << 4) | ((mp)->port_id & 0xf))
++
++int npe_mh_status(struct npe_info *npe)
++{
++ struct npe_mh_msg msg;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.u.byte[CMD] = IX_ETHNPE_NPE_GETSTATUS;
++ return send_message(npe, &msg);
++}
++
++int npe_mh_setportaddr(struct npe_info *npe, struct mac_plat_info *mp,
++ u8 *macaddr)
++{
++ struct npe_mh_msg msg;
++
++ msg.u.byte[CMD] = IX_ETHNPE_EDB_SETPORTADDRESS;
++ msg.u.byte[PORT] = mp->eth_id;
++ memcpy(msg.u.byte + MAC, macaddr, 6);
++
++ return send_message(npe, &msg);
++}
++
++int npe_mh_disable_firewall(struct npe_info *npe, struct mac_plat_info *mp)
++{
++ struct npe_mh_msg msg;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.u.byte[CMD] = IX_ETHNPE_FW_SETFIREWALLMODE;
++ msg.u.byte[PORT] = logical_id(mp);
++
++ return send_message(npe, &msg);
++}
++
++int npe_mh_npe_loopback_mode(struct npe_info *npe, struct mac_plat_info *mp,
++ int enable)
++{
++ struct npe_mh_msg msg;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.u.byte[CMD] = IX_ETHNPE_SETLOOPBACK_MODE;
++ msg.u.byte[PORT] = logical_id(mp);
++ msg.u.byte[3] = enable ? 1 : 0;
++
++ return send_message(npe, &msg);
++}
++
++int npe_mh_set_rxqid(struct npe_info *npe, struct mac_plat_info *mp, int qid)
++{
++ struct npe_mh_msg msg;
++ int i, ret;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.u.byte[CMD] = IX_ETHNPE_VLAN_SETRXQOSENTRY;
++ msg.u.byte[PORT] = logical_id(mp);
++ msg.u.byte[5] = qid | 0x80;
++ msg.u.byte[7] = qid<<4;
++ for(i=0; i<8; i++) {
++ msg.u.byte[3] = i;
++ if ((ret = send_message(npe, &msg)))
++ return ret;
++ }
++ return 0;
++}
++
++int npe_mh_get_stats(struct npe_info *npe, struct mac_plat_info *mp, u32 phys,
++ int reset)
++{
++ struct npe_mh_msg msg;
++ memset(&msg, 0, sizeof(msg));
++ msg.u.byte[CMD] = reset ? IX_ETHNPE_RESETSTATS : IX_ETHNPE_GETSTATS;
++ msg.u.byte[PORT] = logical_id(mp);
++ msg.u.data[1] = cpu_to_npe32(cpu_to_be32(phys));
++
++ return send_message(npe, &msg);
++}
++
++
++EXPORT_SYMBOL(npe_mh_status);
++EXPORT_SYMBOL(npe_mh_setportaddr);
++EXPORT_SYMBOL(npe_mh_disable_firewall);
++EXPORT_SYMBOL(npe_mh_set_rxqid);
++EXPORT_SYMBOL(npe_mh_npe_loopback_mode);
++EXPORT_SYMBOL(npe_mh_get_stats);
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/phy.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/phy.c 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,113 @@
++/*
++ * phy.c - MDIO functions and mii initialisation
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++
++#include <linux/mutex.h>
++#include "mac.h"
++
++#define MAX_PHYS (1<<5)
++
++/*
++ * We must always use the same MAC for acessing the MDIO
++ * We may not use each MAC for its PHY :-(
++ */
++
++static struct net_device *phy_dev = NULL;
++static struct mutex mtx;
++
++/* here we remember if the PHY is alive, to avoid log dumping */
++static int phy_works[MAX_PHYS];
++
++int mdio_read_register(struct net_device *dev, int phy_addr, int phy_reg)
++{
++ struct mac_info *mac;
++ u32 cmd, reg;
++ int cnt = 0;
++
++ if (!phy_dev)
++ return 0;
++
++ mac = netdev_priv(phy_dev);
++ cmd = mdio_cmd(phy_addr, phy_reg);
++ mutex_lock_interruptible(&mtx);
++ mac_mdio_cmd_write(mac, cmd);
++ while((cmd = mac_mdio_cmd_read(mac)) & MII_GO) {
++ if (++cnt >= 100) {
++ printk("%s: PHY[%d] access failed\n",
++ dev->name, phy_addr);
++ break;
++ }
++ schedule();
++ }
++ reg = mac_mdio_status_read(mac);
++ mutex_unlock(&mtx);
++ if (reg & MII_READ_FAIL) {
++ if (phy_works[phy_addr]) {
++ printk("%s: PHY[%d] unresponsive\n",
++ dev->name, phy_addr);
++ }
++ reg = 0;
++ phy_works[phy_addr] = 0;
++ } else {
++ if ( !phy_works[phy_addr]) {
++ printk("%s: PHY[%d] responsive again\n",
++ dev->name, phy_addr);
++ }
++ phy_works[phy_addr] = 1;
++ }
++ return reg & 0xffff;
++}
++
++void
++mdio_write_register(struct net_device *dev, int phy_addr, int phy_reg, int val)
++{
++ struct mac_info *mac;
++ u32 cmd;
++ int cnt=0;
++
++ if (!phy_dev)
++ return;
++
++ mac = netdev_priv(phy_dev);
++ cmd = mdio_cmd(phy_addr, phy_reg) | MII_WRITE | val;
++
++ mutex_lock_interruptible(&mtx);
++ mac_mdio_cmd_write(mac, cmd);
++ while((cmd = mac_mdio_cmd_read(mac)) & MII_GO) {
++ if (++cnt >= 100) {
++ printk("%s: PHY[%d] access failed\n",
++ dev->name, phy_addr);
++ break;
++ }
++ schedule();
++ }
++ mutex_unlock(&mtx);
++}
++
++void init_mdio(struct net_device *dev, int phy_id)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ int i;
++
++ /* All phy operations should use the same MAC
++ * (my experience)
++ */
++ if (mac->plat->eth_id == 0) {
++ mutex_init(&mtx);
++ phy_dev = dev;
++ for (i=0; i<MAX_PHYS; i++)
++ phy_works[i] = 1;
++ }
++ mac->mii.dev = dev;
++ mac->mii.phy_id = phy_id;
++ mac->mii.phy_id_mask = MAX_PHYS - 1;
++ mac->mii.reg_num_mask = 0x1f;
++ mac->mii.mdio_read = mdio_read_register;
++ mac->mii.mdio_write = mdio_write_register;
++}
++
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ucode_dl.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ucode_dl.c 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,479 @@
++/*
++ * ucode_dl.c - provide an NPE device and a char-dev for microcode download
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/miscdevice.h>
++#include <linux/platform_device.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/firmware.h>
++#include <linux/dma-mapping.h>
++#include <linux/byteorder/swab.h>
++#include <asm/uaccess.h>
++#include <asm/io.h>
++
++#include <linux/ixp_npe.h>
++
++#define IXNPE_VERSION "IXP4XX NPE driver Version 0.3.0"
++
++#define DL_MAGIC 0xfeedf00d
++#define DL_MAGIC_SWAP 0x0df0edfe
++
++#define EOF_BLOCK 0xf
++#define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \
++ sizeof(struct dl_image))
++
++#define BT_INSTR 0
++#define BT_DATA 1
++
++enum blk_type {
++ instruction,
++ data,
++};
++
++struct dl_block {
++ u32 type;
++ u32 offset;
++};
++
++struct dl_image {
++ u32 magic;
++ u32 id;
++ u32 size;
++ union {
++ u32 data[0];
++ struct dl_block block[0];
++ } u;
++};
++
++struct dl_codeblock {
++ u32 npe_addr;
++ u32 size;
++ u32 data[0];
++};
++
++static struct platform_driver ixp4xx_npe_driver;
++
++static int match_by_npeid(struct device *dev, void *id)
++{
++ struct npe_info *npe = dev_get_drvdata(dev);
++ if (!npe->plat)
++ return 0;
++ return (npe->plat->id == *(int*)id);
++}
++
++struct device *get_npe_by_id(int id)
++{
++ struct device *dev = driver_find_device(&ixp4xx_npe_driver.driver,
++ NULL, &id, match_by_npeid);
++ if (dev) {
++ struct npe_info *npe = dev_get_drvdata(dev);
++ if (!try_module_get(THIS_MODULE)) {
++ put_device(dev);
++ return NULL;
++ }
++ npe->usage++;
++ }
++ return dev;
++}
++
++void return_npe_dev(struct device *dev)
++{
++ struct npe_info *npe = dev_get_drvdata(dev);
++ put_device(dev);
++ module_put(THIS_MODULE);
++ npe->usage--;
++}
++
++static int
++download_block(struct npe_info *npe, struct dl_codeblock *cb, unsigned type)
++{
++ int i;
++ int cmd;
++
++ switch (type) {
++ case BT_DATA:
++ cmd = IX_NPEDL_EXCTL_CMD_WR_DATA_MEM;
++ if (cb->npe_addr + cb->size > npe->plat->data_size) {
++ printk(KERN_INFO "Data size too large: %d+%d > %d\n",
++ cb->npe_addr, cb->size, npe->plat->data_size);
++ return -EIO;
++ }
++ break;
++ case BT_INSTR:
++ cmd = IX_NPEDL_EXCTL_CMD_WR_INS_MEM;
++ if (cb->npe_addr + cb->size > npe->plat->inst_size) {
++ printk(KERN_INFO "Instr size too large: %d+%d > %d\n",
++ cb->npe_addr, cb->size, npe->plat->inst_size);
++ return -EIO;
++ }
++ break;
++ default:
++ printk(KERN_INFO "Unknown CMD: %d\n", type);
++ return -EIO;
++ }
++
++ for (i=0; i < cb->size; i++) {
++ npe_write_cmd(npe, cb->npe_addr + i, cb->data[i], cmd);
++ }
++
++ return 0;
++}
++
++static int store_npe_image(struct dl_image *image, struct device *dev)
++{
++ struct dl_block *blk;
++ struct dl_codeblock *cb;
++ struct npe_info *npe;
++ int ret=0;
++
++ if (!dev) {
++ dev = get_npe_by_id( (image->id >> 24) & 0xf);
++ return_npe_dev(dev);
++ }
++ if (!dev)
++ return -ENODEV;
++
++ npe = dev_get_drvdata(dev);
++ if (npe->loaded && (npe->usage > 0)) {
++ printk(KERN_INFO "Cowardly refusing to reload an Image "
++ "into the used and running %s\n", npe->plat->name);
++ return 0; /* indicate success anyway... */
++ }
++ if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xf)) {
++ printk(KERN_INFO "IXP46x NPE image ignored on IXP42x\n");
++ return -EIO;
++ }
++
++ npe_stop(npe);
++ npe_reset(npe);
++
++ for (blk = image->u.block; blk->type != EOF_BLOCK; blk++) {
++ if (blk->offset > image->size) {
++ printk(KERN_INFO "Block offset out of range\n");
++ return -EIO;
++ }
++ cb = (struct dl_codeblock*)&image->u.data[blk->offset];
++ if (blk->offset + cb->size + 2 > image->size) {
++ printk(KERN_INFO "Codeblock size out of range\n");
++ return -EIO;
++ }
++ if ((ret = download_block(npe, cb, blk->type)))
++ return ret;
++ }
++ *(u32*)npe->img_info = cpu_to_be32(image->id);
++ npe_start(npe);
++
++ printk(KERN_INFO "Image loaded to %s Func:%x, Rel: %x:%x, Status: %x\n",
++ npe->plat->name, npe->img_info[1], npe->img_info[2],
++ npe->img_info[3], npe_status(npe));
++ if (npe_mh_status(npe)) {
++ printk(KERN_ERR "%s not responding\n", npe->plat->name);
++ }
++ npe->loaded = 1;
++ return 0;
++}
++
++static int ucode_open(struct inode *inode, struct file *file)
++{
++ file->private_data = kmalloc(sizeof(struct dl_image), GFP_KERNEL);
++ if (!file->private_data)
++ return -ENOMEM;
++ return 0;
++}
++
++static int ucode_close(struct inode *inode, struct file *file)
++{
++ kfree(file->private_data);
++ return 0;
++}
++
++static ssize_t ucode_write(struct file *file, const char __user *buf,
++ size_t count, loff_t *ppos)
++{
++ union {
++ char *data;
++ struct dl_image *image;
++ } u;
++ const char __user *cbuf = buf;
++
++ u.data = file->private_data;
++
++ while (count) {
++ int len;
++ if (*ppos < sizeof(struct dl_image)) {
++ len = sizeof(struct dl_image) - *ppos;
++ len = len > count ? count : len;
++ if (copy_from_user(u.data + *ppos, cbuf, len))
++ return -EFAULT;
++ count -= len;
++ *ppos += len;
++ cbuf += len;
++ continue;
++ } else if (*ppos == sizeof(struct dl_image)) {
++ void *data;
++ if (u.image->magic == DL_MAGIC_SWAP) {
++ printk(KERN_INFO "swapped image found\n");
++ u.image->id = swab32(u.image->id);
++ u.image->size = swab32(u.image->size);
++ } else if (u.image->magic != DL_MAGIC) {
++ printk(KERN_INFO "Bad magic:%x\n",
++ u.image->magic);
++ return -EFAULT;
++ }
++ len = IMG_SIZE(u.image);
++ data = kmalloc(len, GFP_KERNEL);
++ if (!data)
++ return -ENOMEM;
++ memcpy(data, u.data, *ppos);
++ kfree(u.data);
++ u.data = (char*)data;
++ file->private_data = data;
++ }
++ len = IMG_SIZE(u.image) - *ppos;
++ len = len > count ? count : len;
++ if (copy_from_user(u.data + *ppos, cbuf, len))
++ return -EFAULT;
++ count -= len;
++ *ppos += len;
++ cbuf += len;
++ if (*ppos == IMG_SIZE(u.image)) {
++ int ret, i;
++ *ppos = 0;
++ if (u.image->magic == DL_MAGIC_SWAP) {
++ for (i=0; i<u.image->size; i++) {
++ u.image->u.data[i] =
++ swab32(u.image->u.data[i]);
++ }
++ u.image->magic = swab32(u.image->magic);
++ }
++ ret = store_npe_image(u.image, NULL);
++ if (ret) {
++ printk(KERN_INFO "Error in NPE image: %x\n",
++ u.image->id);
++ return ret;
++ }
++ }
++ }
++ return (cbuf-buf);
++}
++
++static void npe_firmware_probe(struct device *dev)
++{
++#if (defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)) \
++ && defined(MODULE)
++ const struct firmware *fw_entry;
++ struct npe_info *npe = dev_get_drvdata(dev);
++ struct dl_image *image;
++ int ret = -1, i;
++
++ if (request_firmware(&fw_entry, npe->plat->name, dev) != 0) {
++ return;
++ }
++ image = (struct dl_image*)fw_entry->data;
++ /* Sanity checks */
++ if (fw_entry->size < sizeof(struct dl_image)) {
++ printk(KERN_ERR "Firmware error: too small\n");
++ goto out;
++ }
++ if (image->magic == DL_MAGIC_SWAP) {
++ printk(KERN_INFO "swapped image found\n");
++ image->id = swab32(image->id);
++ image->size = swab32(image->size);
++ } else if (image->magic != DL_MAGIC) {
++ printk(KERN_ERR "Bad magic:%x\n", image->magic);
++ goto out;
++ }
++ if (IMG_SIZE(image) != fw_entry->size) {
++ printk(KERN_ERR "Firmware error: bad size\n");
++ goto out;
++ }
++ if (((image->id >> 24) & 0xf) != npe->plat->id) {
++ printk(KERN_ERR "NPE id missmatch\n");
++ goto out;
++ }
++ if (image->magic == DL_MAGIC_SWAP) {
++ for (i=0; i<image->size; i++) {
++ image->u.data[i] = swab32(image->u.data[i]);
++ }
++ image->magic = swab32(image->magic);
++ }
++
++ ret = store_npe_image(image, dev);
++out:
++ if (ret) {
++ printk(KERN_ERR "Error downloading Firmware for %s\n",
++ npe->plat->name);
++ }
++ release_firmware(fw_entry);
++#endif
++}
++
++static void disable_npe_irq(struct npe_info *npe)
++{
++ u32 reg;
++ reg = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_CTL);
++ reg &= ~(IX_NPEMH_NPE_CTL_OFE | IX_NPEMH_NPE_CTL_IFE);
++ reg |= IX_NPEMH_NPE_CTL_OFEWE | IX_NPEMH_NPE_CTL_IFEWE;
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_CTL, reg);
++}
++
++static ssize_t show_npe_state(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct npe_info *npe = dev_get_drvdata(dev);
++
++ strcpy(buf, npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN ?
++ "start\n" : "stop\n");
++ return strlen(buf);
++}
++
++static ssize_t set_npe_state(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct npe_info *npe = dev_get_drvdata(dev);
++
++ if (npe->usage) {
++ printk("%s in use: read-only\n", npe->plat->name);
++ return count;
++ }
++ if (!strncmp(buf, "start", 5)) {
++ npe_start(npe);
++ }
++ if (!strncmp(buf, "stop", 4)) {
++ npe_stop(npe);
++ }
++ if (!strncmp(buf, "reset", 5)) {
++ npe_stop(npe);
++ npe_reset(npe);
++ }
++ return count;
++}
++
++static DEVICE_ATTR(state, S_IRUGO | S_IWUSR, show_npe_state, set_npe_state);
++
++static int npe_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ struct npe_info *npe;
++ struct npe_plat_data *plat = pdev->dev.platform_data;
++ int err, size, ret=0;
++
++ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0)))
++ return -EIO;
++
++ if (!(npe = kzalloc(sizeof(struct npe_info), GFP_KERNEL)))
++ return -ENOMEM;
++
++ size = res->end - res->start +1;
++ npe->res = request_mem_region(res->start, size, plat->name);
++ if (!npe->res) {
++ ret = -EBUSY;
++ printk(KERN_ERR "Failed to get memregion(%x, %x)\n",
++ res->start, size);
++ goto out_free;
++ }
++
++ npe->addr = ioremap(res->start, size);
++ if (!npe->addr) {
++ ret = -ENOMEM;
++ printk(KERN_ERR "Failed to ioremap(%x, %x)\n",
++ res->start, size);
++ goto out_rel;
++ }
++
++ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
++
++ platform_set_drvdata(pdev, npe);
++
++ err = device_create_file(&pdev->dev, &dev_attr_state);
++ if (err)
++ goto out_rel;
++
++ npe->plat = plat;
++ disable_npe_irq(npe);
++ npe->usage = 0;
++ npe_reset(npe);
++ npe_firmware_probe(&pdev->dev);
++
++ return 0;
++
++out_rel:
++ release_resource(npe->res);
++out_free:
++ kfree(npe);
++ return ret;
++}
++
++static struct file_operations ucode_dl_fops = {
++ .owner = THIS_MODULE,
++ .write = ucode_write,
++ .open = ucode_open,
++ .release = ucode_close,
++};
++
++static struct miscdevice ucode_dl_dev = {
++ .minor = MICROCODE_MINOR,
++ .name = "ixp4xx_ucode",
++ .fops = &ucode_dl_fops,
++};
++
++static int npe_remove(struct platform_device *pdev)
++{
++ struct npe_info *npe = platform_get_drvdata(pdev);
++
++ device_remove_file(&pdev->dev, &dev_attr_state);
++
++ iounmap(npe->addr);
++ release_resource(npe->res);
++ kfree(npe);
++ return 0;
++}
++
++static struct platform_driver ixp4xx_npe_driver = {
++ .driver = {
++ .name = "ixp4xx_npe",
++ .owner = THIS_MODULE,
++ },
++ .probe = npe_probe,
++ .remove = npe_remove,
++};
++
++static int __init init_npedriver(void)
++{
++ int ret;
++ if ((ret = misc_register(&ucode_dl_dev))){
++ printk(KERN_ERR "Failed to register misc device %d\n",
++ MICROCODE_MINOR);
++ return ret;
++ }
++ if ((ret = platform_driver_register(&ixp4xx_npe_driver)))
++ misc_deregister(&ucode_dl_dev);
++ else
++ printk(KERN_INFO IXNPE_VERSION " initialized\n");
++
++ return ret;
++
++}
++
++static void __exit finish_npedriver(void)
++{
++ misc_deregister(&ucode_dl_dev);
++ platform_driver_unregister(&ixp4xx_npe_driver);
++}
++
++module_init(init_npedriver);
++module_exit(finish_npedriver);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
++
++EXPORT_SYMBOL(get_npe_by_id);
++EXPORT_SYMBOL(return_npe_dev);
+Index: linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+===================================================================
+--- linux-2.6.21-rc1-arm.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2007-02-21 02:24:18.000000000 -0800
++++ linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2007-02-21 02:24:35.000000000 -0800
+@@ -22,6 +22,8 @@
+ #ifndef _ASM_ARM_IXP4XX_H_
+ #define _ASM_ARM_IXP4XX_H_
+
++#include "npe_regs.h"
++
+ /*
+ * IXP4xx Linux Memory Map:
+ *
+@@ -44,6 +46,12 @@
+ */
+
+ /*
++ * PCI Memory Space
++ */
++#define IXP4XX_PCIMEM_BASE_PHYS (0x48000000)
++#define IXP4XX_PCIMEM_REGION_SIZE (0x04000000)
++#define IXP4XX_PCIMEM_BAR_SIZE (0x01000000)
++/*
+ * Queue Manager
+ */
+ #define IXP4XX_QMGR_BASE_PHYS (0x60000000)
+@@ -322,7 +330,13 @@
+ #define PCI_ATPDMA0_LENADDR_OFFSET 0x48
+ #define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C
+ #define PCI_ATPDMA1_PCIADDR_OFFSET 0x50
+-#define PCI_ATPDMA1_LENADDR_OFFSET 0x54
++#define PCI_ATPDMA1_LENADDR_OFFSET 0x54
++#define PCI_PTADMA0_AHBADDR_OFFSET 0x58
++#define PCI_PTADMA0_PCIADDR_OFFSET 0x5c
++#define PCI_PTADMA0_LENADDR_OFFSET 0x60
++#define PCI_PTADMA1_AHBADDR_OFFSET 0x64
++#define PCI_PTADMA1_PCIADDR_OFFSET 0x68
++#define PCI_PTADMA1_LENADDR_OFFSET 0x6c
+
+ /*
+ * PCI Control/Status Registers
+@@ -351,6 +365,12 @@
+ #define PCI_ATPDMA1_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
+ #define PCI_ATPDMA1_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
+ #define PCI_ATPDMA1_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
++#define PCI_PTADMA0_AHBADDR IXP4XX_PCI_CSR(PCI_PTADMA0_AHBADDR_OFFSET)
++#define PCI_PTADMA0_PCIADDR IXP4XX_PCI_CSR(PCI_PTADMA0_PCIADDR_OFFSET)
++#define PCI_PTADMA0_LENADDR IXP4XX_PCI_CSR(PCI_PTADMA0_LENADDR_OFFSET)
++#define PCI_PTADMA1_AHBADDR IXP4XX_PCI_CSR(PCI_PTADMA1_AHBADDR_OFFSET)
++#define PCI_PTADMA1_PCIADDR IXP4XX_PCI_CSR(PCI_PTADMA1_PCIADDR_OFFSET)
++#define PCI_PTADMA1_LENADDR IXP4XX_PCI_CSR(PCI_PTADMA1_LENADDR_OFFSET)
+
+ /*
+ * PCI register values and bit definitions
+@@ -607,6 +627,34 @@
+
+ #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
+
++
++/* Fuse Bits of IXP_EXP_CFG2 */
++#define IX_FUSE_RCOMP (1 << 0)
++#define IX_FUSE_USB (1 << 1)
++#define IX_FUSE_HASH (1 << 2)
++#define IX_FUSE_AES (1 << 3)
++#define IX_FUSE_DES (1 << 4)
++#define IX_FUSE_HDLC (1 << 5)
++#define IX_FUSE_AAL (1 << 6)
++#define IX_FUSE_HSS (1 << 7)
++#define IX_FUSE_UTOPIA (1 << 8)
++#define IX_FUSE_ETH0 (1 << 9)
++#define IX_FUSE_ETH1 (1 << 10)
++#define IX_FUSE_NPEA (1 << 11)
++#define IX_FUSE_NPEB (1 << 12)
++#define IX_FUSE_NPEC (1 << 13)
++#define IX_FUSE_PCI (1 << 14)
++#define IX_FUSE_ECC (1 << 15)
++#define IX_FUSE_UTOPIA_PHY_LIMIT (3 << 16)
++#define IX_FUSE_USB_HOST (1 << 18)
++#define IX_FUSE_NPEA_ETH (1 << 19)
++#define IX_FUSE_NPEB_ETH (1 << 20)
++#define IX_FUSE_RSA (1 << 21)
++#define IX_FUSE_XSCALE_MAX_FREQ (3 << 22)
++
++#define IX_FUSE_IXP46X_ONLY IX_FUSE_XSCALE_MAX_FREQ | IX_FUSE_RSA | \
++ IX_FUSE_NPEB_ETH | IX_FUSE_NPEA_ETH | IX_FUSE_USB_HOST | IX_FUSE_ECC
++
+ #ifndef __ASSEMBLY__
+ static inline int cpu_is_ixp46x(void)
+ {
+@@ -620,6 +668,15 @@
+ #endif
+ return 0;
+ }
++
++static inline u32 ix_fuse(void)
++{
++ unsigned int fuses = ~(*IXP4XX_EXP_CFG2);
++ if (!cpu_is_ixp46x())
++ fuses &= ~IX_FUSE_IXP46X_ONLY;
++
++ return fuses;
++}
+ #endif
+
+ #endif
+Index: linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/npe_regs.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/npe_regs.h 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,82 @@
++#ifndef NPE_REGS_H
++#define NPE_REGS_H
++
++/* Execution Address */
++#define IX_NPEDL_REG_OFFSET_EXAD 0x00
++/* Execution Data */
++#define IX_NPEDL_REG_OFFSET_EXDATA 0x04
++/* Execution Control */
++#define IX_NPEDL_REG_OFFSET_EXCTL 0x08
++/* Execution Count */
++#define IX_NPEDL_REG_OFFSET_EXCT 0x0C
++/* Action Point 0 */
++#define IX_NPEDL_REG_OFFSET_AP0 0x10
++/* Action Point 1 */
++#define IX_NPEDL_REG_OFFSET_AP1 0x14
++/* Action Point 2 */
++#define IX_NPEDL_REG_OFFSET_AP2 0x18
++/* Action Point 3 */
++#define IX_NPEDL_REG_OFFSET_AP3 0x1C
++/* Watchpoint FIFO */
++#define IX_NPEDL_REG_OFFSET_WFIFO 0x20
++/* Watch Count */
++#define IX_NPEDL_REG_OFFSET_WC 0x24
++/* Profile Count */
++#define IX_NPEDL_REG_OFFSET_PROFCT 0x28
++
++/* Messaging Status */
++#define IX_NPEDL_REG_OFFSET_STAT 0x2C
++/* Messaging Control */
++#define IX_NPEDL_REG_OFFSET_CTL 0x30
++/* Mailbox Status */
++#define IX_NPEDL_REG_OFFSET_MBST 0x34
++/* messaging in/out FIFO */
++#define IX_NPEDL_REG_OFFSET_FIFO 0x38
++
++
++#define IX_NPEDL_MASK_ECS_DBG_REG_2_IF 0x00100000
++#define IX_NPEDL_MASK_ECS_DBG_REG_2_IE 0x00080000
++#define IX_NPEDL_MASK_ECS_REG_0_ACTIVE 0x80000000
++
++#define IX_NPEDL_EXCTL_CMD_NPE_STEP 0x01
++#define IX_NPEDL_EXCTL_CMD_NPE_START 0x02
++#define IX_NPEDL_EXCTL_CMD_NPE_STOP 0x03
++#define IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE 0x04
++#define IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT 0x0C
++#define IX_NPEDL_EXCTL_CMD_RD_INS_MEM 0x10
++#define IX_NPEDL_EXCTL_CMD_WR_INS_MEM 0x11
++#define IX_NPEDL_EXCTL_CMD_RD_DATA_MEM 0x12
++#define IX_NPEDL_EXCTL_CMD_WR_DATA_MEM 0x13
++#define IX_NPEDL_EXCTL_CMD_RD_ECS_REG 0x14
++#define IX_NPEDL_EXCTL_CMD_WR_ECS_REG 0x15
++
++#define IX_NPEDL_EXCTL_STATUS_RUN 0x80000000
++#define IX_NPEDL_EXCTL_STATUS_STOP 0x40000000
++#define IX_NPEDL_EXCTL_STATUS_CLEAR 0x20000000
++
++#define IX_NPEDL_MASK_WFIFO_VALID 0x80000000
++#define IX_NPEDL_MASK_STAT_OFNE 0x00010000
++#define IX_NPEDL_MASK_STAT_IFNE 0x00080000
++
++#define IX_NPEDL_ECS_DBG_CTXT_REG_0 0x0C
++#define IX_NPEDL_ECS_PRI_1_CTXT_REG_0 0x04
++#define IX_NPEDL_ECS_PRI_2_CTXT_REG_0 0x08
++
++/* NPE control register bit definitions */
++#define IX_NPEMH_NPE_CTL_OFE (1 << 16) /**< OutFifoEnable */
++#define IX_NPEMH_NPE_CTL_IFE (1 << 17) /**< InFifoEnable */
++#define IX_NPEMH_NPE_CTL_OFEWE (1 << 24) /**< OutFifoEnableWriteEnable */
++#define IX_NPEMH_NPE_CTL_IFEWE (1 << 25) /**< InFifoEnableWriteEnable */
++
++/* NPE status register bit definitions */
++#define IX_NPEMH_NPE_STAT_OFNE (1 << 16) /**< OutFifoNotEmpty */
++#define IX_NPEMH_NPE_STAT_IFNF (1 << 17) /**< InFifoNotFull */
++#define IX_NPEMH_NPE_STAT_OFNF (1 << 18) /**< OutFifoNotFull */
++#define IX_NPEMH_NPE_STAT_IFNE (1 << 19) /**< InFifoNotEmpty */
++#define IX_NPEMH_NPE_STAT_MBINT (1 << 20) /**< Mailbox interrupt */
++#define IX_NPEMH_NPE_STAT_IFINT (1 << 21) /**< InFifo interrupt */
++#define IX_NPEMH_NPE_STAT_OFINT (1 << 22) /**< OutFifo interrupt */
++#define IX_NPEMH_NPE_STAT_WFINT (1 << 23) /**< WatchFifo interrupt */
++
++#endif
++
+Index: linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/platform.h
+===================================================================
+--- linux-2.6.21-rc1-arm.orig/include/asm-arm/arch-ixp4xx/platform.h 2007-02-21 02:24:18.000000000 -0800
++++ linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/platform.h 2007-02-21 02:24:35.000000000 -0800
+@@ -86,6 +86,25 @@
+ unsigned long scl_pin;
+ };
+
++struct npe_plat_data {
++ const char *name;
++ int data_size;
++ int inst_size;
++ int id; /* Node ID */
++};
++
++struct mac_plat_info {
++ int npe_id; /* Node ID of the NPE for this port */
++ int port_id; /* Port ID for NPE-B @ ixp465 */
++ int eth_id; /* Physical ID */
++ int phy_id; /* ID of the connected PHY (PCB/platform dependent) */
++ int rxq_id; /* Queue ID of the RX-free q */
++ int rxdoneq_id; /* where incoming packets are returned */
++ int txq_id; /* Where to push the outgoing packets */
++ unsigned char hwaddr[6]; /* Desired hardware address */
++
++};
++
+ /*
+ * This structure provide a means for the board setup code
+ * to give information to th pata_ixp4xx driver. It is
+Index: linux-2.6.21-rc1-arm/include/linux/ixp_crypto.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/include/linux/ixp_crypto.h 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,192 @@
++
++#ifndef IX_CRYPTO_H
++#define IX_CRYPTO_H
++
++#define MAX_KEYLEN 64
++#define NPE_CTX_LEN 80
++#define AES_BLOCK128 16
++
++#define NPE_OP_HASH_GEN_ICV 0x50
++#define NPE_OP_ENC_GEN_KEY 0xc9
++
++
++#define NPE_OP_HASH_VERIFY 0x01
++#define NPE_OP_CCM_ENABLE 0x04
++#define NPE_OP_CRYPT_ENABLE 0x08
++#define NPE_OP_HASH_ENABLE 0x10
++#define NPE_OP_NOT_IN_PLACE 0x20
++#define NPE_OP_HMAC_DISABLE 0x40
++#define NPE_OP_CRYPT_ENCRYPT 0x80
++
++#define MOD_ECB 0x0000
++#define MOD_CTR 0x1000
++#define MOD_CBC_ENC 0x2000
++#define MOD_CBC_DEC 0x3000
++#define MOD_CCM_ENC 0x4000
++#define MOD_CCM_DEC 0x5000
++
++#define ALGO_AES 0x0800
++#define CIPH_DECR 0x0000
++#define CIPH_ENCR 0x0400
++
++#define MOD_DES 0x0000
++#define MOD_TDEA2 0x0100
++#define MOD_TDEA3 0x0200
++#define MOD_AES128 0x0000
++#define MOD_AES192 0x0100
++#define MOD_AES256 0x0200
++
++#define KEYLEN_128 4
++#define KEYLEN_192 6
++#define KEYLEN_256 8
++
++#define CIPHER_TYPE_NULL 0
++#define CIPHER_TYPE_DES 1
++#define CIPHER_TYPE_3DES 2
++#define CIPHER_TYPE_AES 3
++
++#define CIPHER_MODE_ECB 1
++#define CIPHER_MODE_CTR 2
++#define CIPHER_MODE_CBC 3
++#define CIPHER_MODE_CCM 4
++
++#define HASH_TYPE_NULL 0
++#define HASH_TYPE_MD5 1
++#define HASH_TYPE_SHA1 2
++#define HASH_TYPE_CBCMAC 3
++
++#define OP_REG_DONE 1
++#define OP_REGISTER 2
++#define OP_PERFORM 3
++
++#define STATE_UNREGISTERED 0
++#define STATE_REGISTERED 1
++#define STATE_UNLOADING 2
++
++struct crypt_ctl {
++#ifndef CONFIG_NPE_ADDRESS_COHERENT
++ u8 mode; /* NPE operation */
++ u8 init_len;
++ u16 reserved;
++#else
++ u16 reserved;
++ u8 init_len;
++ u8 mode; /* NPE operation */
++#endif
++ u8 iv[16]; /* IV for CBC mode or CTR IV for CTR mode */
++ union {
++ u32 icv;
++ u32 rev_aes;
++ } addr;
++ u32 src_buf;
++ u32 dest_buf;
++#ifndef CONFIG_NPE_ADDRESS_COHERENT
++ u16 auth_offs; /* Authentication start offset */
++ u16 auth_len; /* Authentication data length */
++ u16 crypt_offs; /* Cryption start offset */
++ u16 crypt_len; /* Cryption data length */
++#else
++ u16 auth_len; /* Authentication data length */
++ u16 auth_offs; /* Authentication start offset */
++ u16 crypt_len; /* Cryption data length */
++ u16 crypt_offs; /* Cryption start offset */
++#endif
++ u32 aadAddr; /* Additional Auth Data Addr for CCM mode */
++ u32 crypto_ctx; /* NPE Crypto Param structure address */
++
++ /* Used by Host */
++ struct ix_sa_ctx *sa_ctx;
++ int oper_type;
++};
++
++struct npe_crypt_cont {
++ union {
++ struct crypt_ctl crypt;
++ u8 rev_aes_key[NPE_CTX_LEN];
++ } ctl;
++ struct npe_crypt_cont *next;
++ struct npe_crypt_cont *virt;
++ dma_addr_t phys;
++};
++
++struct ix_hash_algo {
++ char *name;
++ u32 cfgword;
++ int digest_len;
++ int aad_len;
++ unsigned char *icv;
++ int type;
++};
++
++struct ix_cipher_algo {
++ char *name;
++ u32 cfgword_enc;
++ u32 cfgword_dec;
++ int block_len;
++ int iv_len;
++ int type;
++ int mode;
++};
++
++struct ix_key {
++ u8 key[MAX_KEYLEN];
++ int len;
++};
++
++struct ix_sa_master {
++ struct device *npe_dev;
++ struct qm_queue *sendq;
++ struct qm_queue *recvq;
++ struct dma_pool *dmapool;
++ struct npe_crypt_cont *pool;
++ int pool_size;
++ rwlock_t lock;
++};
++
++struct ix_sa_dir {
++ unsigned char *npe_ctx;
++ dma_addr_t npe_ctx_phys;
++ int npe_ctx_idx;
++ u8 npe_mode;
++};
++
++struct ix_sa_ctx {
++ struct list_head list;
++ struct ix_sa_master *master;
++
++ const struct ix_hash_algo *h_algo;
++ const struct ix_cipher_algo *c_algo;
++ struct ix_key c_key;
++ struct ix_key h_key;
++
++ int digest_len;
++
++ struct ix_sa_dir encrypt;
++ struct ix_sa_dir decrypt;
++
++ struct npe_crypt_cont *rev_aes;
++ gfp_t gfp_flags;
++
++ int state;
++ void *priv;
++
++ void(*reg_cb)(struct ix_sa_ctx*, int);
++ void(*perf_cb)(struct ix_sa_ctx*, void*, int);
++ atomic_t use_cnt;
++};
++
++const struct ix_hash_algo *ix_hash_by_id(int type);
++const struct ix_cipher_algo *ix_cipher_by_id(int type, int mode);
++
++struct ix_sa_ctx *ix_sa_ctx_new(int priv_len, gfp_t flags);
++void ix_sa_ctx_free(struct ix_sa_ctx *sa_ctx);
++
++int ix_sa_crypto_perform(struct ix_sa_ctx *sa_ctx, u8 *data, void *ptr,
++ int datalen, int c_offs, int c_len, int a_offs, int a_len,
++ int hmac, char *iv, int encrypt);
++
++int ix_sa_ctx_setup_cipher_auth(struct ix_sa_ctx *sa_ctx,
++ const struct ix_cipher_algo *cipher,
++ const struct ix_hash_algo *auth, int len);
++
++#endif
+Index: linux-2.6.21-rc1-arm/include/linux/ixp_npe.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/include/linux/ixp_npe.h 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,117 @@
++/*
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#ifndef NPE_DEVICE_H
++#define NPE_DEVICE_H
++
++#include <linux/miscdevice.h>
++#include <asm/hardware.h>
++
++#ifdef __ARMEB__
++#undef CONFIG_NPE_ADDRESS_COHERENT
++#else
++#define CONFIG_NPE_ADDRESS_COHERENT
++#endif
++
++#if defined(__ARMEB__) || defined (CONFIG_NPE_ADDRESS_COHERENT)
++#define npe_to_cpu32(x) (x)
++#define npe_to_cpu16(x) (x)
++#define cpu_to_npe32(x) (x)
++#define cpu_to_npe16(x) (x)
++#else
++#error NPE_DATA_COHERENT
++#define NPE_DATA_COHERENT
++#define npe_to_cpu32(x) be32_to_cpu(x)
++#define npe_to_cpu16(x) be16_to_cpu(x)
++#define cpu_to_npe32(x) cpu_to_be32(x)
++#define cpu_to_npe16(x) cpu_to_be16(x)
++#endif
++
++
++struct npe_info {
++ struct resource *res;
++ void __iomem *addr;
++ struct npe_plat_data *plat;
++ u8 img_info[4];
++ int usage;
++ int loaded;
++ u32 exec_count;
++ u32 ctx_reg2;
++};
++
++
++static inline void npe_reg_write(struct npe_info *npe, u32 reg, u32 val)
++{
++ *(volatile u32*)((u8*)(npe->addr) + reg) = val;
++}
++
++static inline u32 npe_reg_read(struct npe_info *npe, u32 reg)
++{
++ return *(volatile u32*)((u8*)(npe->addr) + reg);
++}
++
++static inline u32 npe_status(struct npe_info *npe)
++{
++ return npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXCTL);
++}
++
++/* ixNpeDlNpeMgrCommandIssue */
++static inline void npe_write_exctl(struct npe_info *npe, u32 cmd)
++{
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCTL, cmd);
++}
++/* ixNpeDlNpeMgrWriteCommandIssue */
++static inline void
++npe_write_cmd(struct npe_info *npe, u32 addr, u32 data, int cmd)
++{
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXDATA, data);
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXAD, addr);
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCTL, cmd);
++}
++/* ixNpeDlNpeMgrReadCommandIssue */
++static inline u32
++npe_read_cmd(struct npe_info *npe, u32 addr, int cmd)
++{
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXAD, addr);
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCTL, cmd);
++ /* Intel reads the data twice - so do we... */
++ npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXDATA);
++ return npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXDATA);
++}
++
++/* ixNpeDlNpeMgrExecAccRegWrite */
++static inline void npe_write_ecs_reg(struct npe_info *npe, u32 addr, u32 data)
++{
++ npe_write_cmd(npe, addr, data, IX_NPEDL_EXCTL_CMD_WR_ECS_REG);
++}
++/* ixNpeDlNpeMgrExecAccRegRead */
++static inline u32 npe_read_ecs_reg(struct npe_info *npe, u32 addr)
++{
++ return npe_read_cmd(npe, addr, IX_NPEDL_EXCTL_CMD_RD_ECS_REG);
++}
++
++extern void npe_stop(struct npe_info *npe);
++extern void npe_start(struct npe_info *npe);
++extern void npe_reset(struct npe_info *npe);
++
++extern struct device *get_npe_by_id(int id);
++extern void return_npe_dev(struct device *dev);
++
++/* NPE Messages */
++extern int
++npe_mh_status(struct npe_info *npe);
++extern int
++npe_mh_setportaddr(struct npe_info *npe, struct mac_plat_info *mp, u8 *macaddr);
++extern int
++npe_mh_disable_firewall(struct npe_info *npe, struct mac_plat_info *mp);
++extern int
++npe_mh_set_rxqid(struct npe_info *npe, struct mac_plat_info *mp, int qid);
++extern int
++npe_mh_npe_loopback_mode(struct npe_info *npe, struct mac_plat_info *mp, int enable);
++extern int
++npe_mh_get_stats(struct npe_info *npe, struct mac_plat_info *mp, u32 phys, int reset);
++
++#endif
+Index: linux-2.6.21-rc1-arm/include/linux/ixp_qmgr.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/include/linux/ixp_qmgr.h 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,202 @@
++/*
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#ifndef IX_QMGR_H
++#define IX_QMGR_H
++
++#include <linux/skbuff.h>
++#include <linux/list.h>
++#include <linux/if_ether.h>
++#include <linux/spinlock.h>
++#include <linux/platform_device.h>
++#include <linux/ixp_npe.h>
++#include <asm/atomic.h>
++
++/* All offsets are in 32bit words */
++#define QUE_LOW_STAT0 0x100 /* 4x Status of the 32 lower queues 0-31 */
++#define QUE_UO_STAT0 0x104 /* 2x Underflow/Overflow status bits*/
++#define QUE_UPP_STAT0 0x106 /* 2x Status of thew 32 upper queues 32-63 */
++#define INT0_SRC_SELREG0 0x108 /* 4x */
++#define QUE_IE_REG0 0x10c /* 2x */
++#define QUE_INT_REG0 0x10e /* 2x IRQ reg, write 1 to reset IRQ */
++
++#define IX_QMGR_QCFG_BASE 0x800
++#define IX_QMGR_QCFG_SIZE 0x40
++#define IX_QMGR_SRAM_SPACE (IX_QMGR_QCFG_BASE + IX_QMGR_QCFG_SIZE)
++
++#define MAX_QUEUES 32 /* first, we only support the lower 32 queues */
++#define MAX_NPES 3
++
++enum {
++ Q_IRQ_ID_E = 0, /* Queue Empty due to last read */
++ Q_IRQ_ID_NE, /* Queue Nearly Empty due to last read */
++ Q_IRQ_ID_NF, /* Queue Nearly Full due to last write */
++ Q_IRQ_ID_F, /* Queue Full due to last write */
++ Q_IRQ_ID_NOT_E, /* Queue Not Empty due to last write */
++ Q_IRQ_ID_NOT_NE, /* Queue Not Nearly Empty due to last write */
++ Q_IRQ_ID_NOT_NF, /* Queue Not Nearly Full due to last read */
++ Q_IRQ_ID_NOT_F /* Queue Not Full due to last read */
++};
++
++extern struct qm_queue *request_queue(int qid, int len);
++extern void release_queue(struct qm_queue *queue);
++extern int queue_set_irq_src(struct qm_queue *queue, int flag);
++extern void queue_set_watermarks(struct qm_queue *, unsigned ne, unsigned nf);
++extern int queue_len(struct qm_queue *queue);
++
++struct qm_qmgr;
++struct qm_queue;
++
++typedef void(*queue_cb)(struct qm_queue *);
++
++struct qm_queue {
++ int addr; /* word offset from IX_QMGR_SRAM_SPACE */
++ int len; /* size in words */
++ int id; /* Q Id */
++ u32 __iomem *acc_reg;
++ struct device *dev;
++ atomic_t use;
++ queue_cb irq_cb;
++ void *cb_data;
++};
++
++#ifndef CONFIG_NPE_ADDRESS_COHERENT
++struct eth_ctl {
++ u32 next;
++ u16 buf_len;
++ u16 pkt_len;
++ u32 phys_addr;
++ u8 dest_id;
++ u8 src_id;
++ u16 flags;
++ u8 qos;
++ u8 padlen;
++ u16 vlan_tci;
++ u8 dest_mac[ETH_ALEN];
++ u8 src_mac[ETH_ALEN];
++};
++
++#else
++struct eth_ctl {
++ u32 next;
++ u16 pkt_len;
++ u16 buf_len;
++ u32 phys_addr;
++ u16 flags;
++ u8 src_id;
++ u8 dest_id;
++ u16 vlan_tci;
++ u8 padlen;
++ u8 qos;
++ u8 dest_mac[ETH_ALEN];
++ u8 src_mac[ETH_ALEN];
++};
++#endif
++
++struct npe_cont {
++ struct eth_ctl eth;
++ void *data;
++ struct npe_cont *next;
++ struct npe_cont *virt;
++ dma_addr_t phys;
++};
++
++struct qm_qmgr {
++ u32 __iomem *addr;
++ struct resource *res;
++ struct qm_queue *queues[MAX_QUEUES];
++ rwlock_t lock;
++ struct npe_cont *pool;
++ struct dma_pool *dmapool;
++ int irq;
++};
++
++static inline void queue_write_cfg_reg(struct qm_queue *queue, u32 val)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++ *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id) = val;
++}
++static inline u32 queue_read_cfg_reg(struct qm_queue *queue)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++ return *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id);
++}
++
++static inline void queue_ack_irq(struct qm_queue *queue)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++ *(qmgr->addr + QUE_INT_REG0) = 1 << queue->id;
++}
++
++static inline void queue_enable_irq(struct qm_queue *queue)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++ *(qmgr->addr + QUE_IE_REG0) |= 1 << queue->id;
++}
++
++static inline void queue_disable_irq(struct qm_queue *queue)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++ *(qmgr->addr + QUE_IE_REG0) &= ~(1 << queue->id);
++}
++
++static inline void queue_put_entry(struct qm_queue *queue, u32 entry)
++{
++ *(queue->acc_reg) = npe_to_cpu32(entry);
++}
++
++static inline u32 queue_get_entry(struct qm_queue *queue)
++{
++ return cpu_to_npe32(*queue->acc_reg);
++}
++
++static inline struct npe_cont *qmgr_get_cont(struct qm_qmgr *qmgr)
++{
++ unsigned long flags;
++ struct npe_cont *cont;
++
++ if (!qmgr->pool)
++ return NULL;
++ write_lock_irqsave(&qmgr->lock, flags);
++ cont = qmgr->pool;
++ qmgr->pool = cont->next;
++ write_unlock_irqrestore(&qmgr->lock, flags);
++ return cont;
++}
++
++static inline void qmgr_return_cont(struct qm_qmgr *qmgr,struct npe_cont *cont)
++{
++ unsigned long flags;
++
++ write_lock_irqsave(&qmgr->lock, flags);
++ cont->next = qmgr->pool;
++ qmgr->pool = cont;
++ write_unlock_irqrestore(&qmgr->lock, flags);
++}
++
++static inline int queue_stat(struct qm_queue *queue)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++ u32 reg = *(qmgr->addr + QUE_UO_STAT0 + (queue->id >> 4));
++ return (reg >> (queue->id & 0xf) << 1) & 3;
++}
++
++/* Prints the queue state, which is very, very helpfull for debugging */
++static inline void queue_state(struct qm_queue *queue)
++{
++ u32 val=0, lstat=0;
++ int offs;
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++
++ offs = queue->id/8 + QUE_LOW_STAT0;
++ val = *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id);
++ lstat = (*(qmgr->addr + offs) >> ((queue->id % 8)*4)) & 0x0f;
++
++ printk("Qid[%02d]: Wptr=%4x, Rptr=%4x, diff=%4x, Stat:%x\n", queue->id,
++ val&0x7f, (val>>7) &0x7f, (val - (val >> 7)) & 0x7f, lstat);
++}
++
++#endif
diff --git a/target/linux/ixp4xx/patches/110-ixp4xx_net_driver_fix_mac_handling.patch b/target/linux/ixp4xx/patches/110-ixp4xx_net_driver_fix_mac_handling.patch
new file mode 100644
index 0000000000..1050702d88
--- /dev/null
+++ b/target/linux/ixp4xx/patches/110-ixp4xx_net_driver_fix_mac_handling.patch
@@ -0,0 +1,17 @@
+---
+ drivers/net/ixp4xx/mac_driver.c | 24 ++++++++++--------------
+ 1 file changed, 10 insertions(+), 14 deletions(-)
+
+Index: linux-2.6.21-rc4-git6-arm/drivers/net/ixp4xx/mac_driver.c
+===================================================================
+--- linux-2.6.21-rc4-git6-arm.orig/drivers/net/ixp4xx/mac_driver.c 2007-03-22 10:32:20.735684085 +0000
++++ linux-2.6.21-rc4-git6-arm/drivers/net/ixp4xx/mac_driver.c 2007-03-22 10:33:29.355972584 +0000
+@@ -842,7 +842,7 @@
+ }
+ }
+
+-module_init(init_mac);
++late_initcall(init_mac);
+ module_exit(finish_mac);
+
+ MODULE_LICENSE("GPL");
diff --git a/target/linux/ixp4xx/patches/139-ixp4xx_net_driver_mtd_load_fw.patch b/target/linux/ixp4xx/patches/139-ixp4xx_net_driver_mtd_load_fw.patch
new file mode 100644
index 0000000000..ef53155c03
--- /dev/null
+++ b/target/linux/ixp4xx/patches/139-ixp4xx_net_driver_mtd_load_fw.patch
@@ -0,0 +1,392 @@
+---
+ drivers/net/ixp4xx/Kconfig | 10 +
+ drivers/net/ixp4xx/Makefile | 1
+ drivers/net/ixp4xx/npe_ucode.c | 185 +++++++++++++++++++++++++++++++++
+ drivers/net/ixp4xx/ucode_dl.c | 43 ++++---
+ include/asm-arm/arch-ixp4xx/platform.h | 19 +++
+ include/linux/ixp_npe.h | 1
+ 6 files changed, 239 insertions(+), 20 deletions(-)
+
+Index: linux-2.6.20-rc3/drivers/net/ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.20-rc3.orig/drivers/net/ixp4xx/Kconfig
++++ linux-2.6.20-rc3/drivers/net/ixp4xx/Kconfig
+@@ -11,6 +11,7 @@
+ tristate "IXP4xx NPE support"
+ depends on ARCH_IXP4XX
+ depends on NET_ETHERNET
++ select CRC16
+ help
+ The IXP4XX NPE driver supports the 3 CPU co-processors called
+ "Network Processing Engines" (NPE). It adds support fo downloading
+@@ -18,7 +19,7 @@
+ More about this at: Documentation/networking/ixp4xx/README.
+ You can either use this OR the Intel Access Library (IAL)
+
+-config IXP4XX_FW_LOAD
++config IXP4XX_NPE_FW_LOAD
+ bool "Use Firmware hotplug for Microcode download"
+ depends on IXP4XX_NPE
+ select HOTPLUG
+@@ -28,6 +29,13 @@
+ /usr/lib/hotplug/firmware/NPE-[ABC]
+ see Documentation/firmware_class/hotplug-script
+
++config IXP4XX_NPE_FW_MTD
++ bool "Load firmware from an mtd partition"
++ depends on IXP4XX_NPE && MTD_IXP4XX
++ help
++ With this option, the driver will search for
++ the firmware into an MTD partition.
++
+ config IXP4XX_MAC
+ tristate "IXP4xx MAC support"
+ depends on IXP4XX_NPE
+Index: linux-2.6.20-rc3/drivers/net/ixp4xx/Makefile
+===================================================================
+--- linux-2.6.20-rc3.orig/drivers/net/ixp4xx/Makefile
++++ linux-2.6.20-rc3/drivers/net/ixp4xx/Makefile
+@@ -1,5 +1,6 @@
+ obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
+ obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
++obj-$(CONFIG_IXP4XX_NPE_FW_MTD) += npe_ucode.o
+ obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o
+ obj-$(CONFIG_IXP4XX_CRYPTO) += ixp4xx_crypto.o
+
+Index: linux-2.6.20-rc3/drivers/net/ixp4xx/npe_ucode.c
+===================================================================
+--- /dev/null
++++ linux-2.6.20-rc3/drivers/net/ixp4xx/npe_ucode.c
+@@ -0,0 +1,185 @@
++/*
++ * Provide an NPE platform device for microcode handling
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/firmware.h>
++#include <linux/mtd/mtd.h>
++
++#include <linux/ixp_npe.h>
++
++#define DL_MAGIC 0xfeedf00d
++#define DL_MAGIC_SWAP 0x0df0edfe
++
++#define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \
++ sizeof(struct dl_image))
++
++#define IMG_REV_MAJOR(id) (((id) >> 8) & 0x0f)
++#define IMG_REV_MINOR(id) ((id) & 0x0f)
++#define IMG_FUNC(id) (((id) >> 16) & 0xff)
++#define IMG_NPE(id) (((id) >> 24) & 0x0f)
++#define IMG_IXP(id) (((id) >> 28) & 0x0f)
++
++static struct platform_driver ixp4xx_npe_ucode_driver;
++static unsigned char *partition_name = NULL;
++
++static void print_image_info(u32 id, u32 offset, u32 size)
++{
++ unsigned char idx;
++ const char *names[] = { "IXP425", "IXP465", "unknown" };
++
++ idx = IMG_IXP(id) < 2 ? IMG_IXP(id) : 2;
++
++ printk(KERN_INFO "npe: found at 0x%x, %s/NPE-%c func: %02x, rev: %x.%x, "
++ "size: %5d, id: %08x\n", offset, names[idx], IMG_NPE(id) + 'A',
++ IMG_FUNC(id), IMG_REV_MAJOR(id), IMG_REV_MINOR(id), size, id);
++}
++
++void npe_swap_image(struct dl_image *image)
++{
++ unsigned int i;
++
++ image->magic = swab32(image->magic);
++ image->id = swab32(image->id);
++ image->size = swab32(image->size);
++
++ for (i = 0; i < image->size; i++)
++ image->u.data[i] = swab32(image->u.data[i]);
++}
++
++static void npe_find_microcode(struct mtd_info *mtd)
++{
++ u32 buf;
++ u32 magic = htonl(DL_MAGIC);
++ u32 id, size;
++ size_t retlen;
++ int err;
++ unsigned int offset = 0;
++
++ printk("npe: searching for firmware...\n");
++
++ while (offset < mtd->size) {
++
++ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &buf);
++ offset += retlen;
++
++ if (buf != magic)
++ continue;
++
++ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &id);
++ offset += retlen;
++
++ if (id == magic)
++ break;
++
++ id = ntohl(id);
++
++ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &size);
++ offset += retlen;
++
++ size = (ntohl(size) * 4) + 12;
++
++ print_image_info(id, offset - 12, size);
++
++ if (size < 24000 && ( IMG_FUNC(id) == 0x01 || IMG_FUNC(id) == 0x00) || IMG_FUNC(id) == 0x05 ) { // XXX fix size/detection
++
++ struct dl_image *image = kmalloc(size, GFP_KERNEL);
++
++ /* we are going to load it, rewind offset */
++ offset -= 12;
++
++ if (image) {
++ err = mtd->read(mtd, offset, size, &retlen, (u_char *) image);
++
++ if (err == 0 && retlen == size) {
++ if (image->magic == DL_MAGIC_SWAP)
++ npe_swap_image(image);
++
++ store_npe_image(image, NULL);
++ } else {
++ printk(KERN_ERR "unable to read firmware\n");
++ }
++
++ kfree(image);
++ }
++
++ offset += size;
++ }
++ }
++}
++
++static void npe_flash_add(struct mtd_info *mtd)
++{
++ if (partition_name == NULL)
++ return;
++
++ if (strcmp(mtd->name, partition_name) == 0) {
++ npe_find_microcode(mtd);
++ }
++}
++
++static void npe_flash_remove(struct mtd_info *mtd) {
++}
++
++static struct mtd_notifier npe_flash_notifier = {
++ .add = npe_flash_add,
++ .remove = npe_flash_remove,
++};
++
++static int npe_ucode_probe(struct platform_device *pdev)
++{
++ struct npe_ucode_platform_data *data = pdev->dev.platform_data;
++
++ if (partition_name)
++ return -EEXIST;
++
++ if (data && data->mtd_partition) {
++ partition_name = data->mtd_partition;
++ return 0;
++ }
++
++ return -EINVAL;
++}
++
++static int npe_ucode_remove(struct platform_device *pdev)
++{
++ return 0;
++}
++
++static struct platform_driver ixp4xx_npe_ucode_driver = {
++ .driver = {
++ .name = "ixp4xx_npe_ucode",
++ .owner = THIS_MODULE,
++ },
++ .probe = npe_ucode_probe,
++ .remove = npe_ucode_remove,
++};
++
++static int __init npe_ucode_init(void)
++{
++ int ret;
++
++ ret = platform_driver_register(&ixp4xx_npe_ucode_driver);
++ register_mtd_user(&npe_flash_notifier);
++
++ return ret;
++}
++
++static void __exit npe_ucode_exit(void)
++{
++ unregister_mtd_user(&npe_flash_notifier);
++ platform_driver_unregister(&ixp4xx_npe_ucode_driver);
++}
++
++module_init(npe_ucode_init);
++module_exit(npe_ucode_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
+Index: linux-2.6.20-rc3/drivers/net/ixp4xx/ucode_dl.c
+===================================================================
+--- linux-2.6.20-rc3.orig/drivers/net/ixp4xx/ucode_dl.c
++++ linux-2.6.20-rc3/drivers/net/ixp4xx/ucode_dl.c
+@@ -16,6 +16,7 @@
+ #include <linux/firmware.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/byteorder/swab.h>
++#include <linux/crc16.h>
+ #include <asm/uaccess.h>
+ #include <asm/io.h>
+
+@@ -26,6 +27,12 @@
+ #define DL_MAGIC 0xfeedf00d
+ #define DL_MAGIC_SWAP 0x0df0edfe
+
++#define IMG_REV_MAJOR(id) (((id) >> 8) & 0x0f)
++#define IMG_REV_MINOR(id) ((id) & 0x0f)
++#define IMG_FUNC(id) (((id) >> 16) & 0xff)
++#define IMG_NPE(id) (((id) >> 24) & 0x0f)
++#define IMG_IXP(id) (((id) >> 28) & 0x0f)
++
+ #define EOF_BLOCK 0xf
+ #define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \
+ sizeof(struct dl_image))
+@@ -38,21 +45,6 @@
+ data,
+ };
+
+-struct dl_block {
+- u32 type;
+- u32 offset;
+-};
+-
+-struct dl_image {
+- u32 magic;
+- u32 id;
+- u32 size;
+- union {
+- u32 data[0];
+- struct dl_block block[0];
+- } u;
+-};
+-
+ struct dl_codeblock {
+ u32 npe_addr;
+ u32 size;
+@@ -127,20 +119,33 @@
+ return 0;
+ }
+
+-static int store_npe_image(struct dl_image *image, struct device *dev)
++int store_npe_image(struct dl_image *image, struct device *dev)
+ {
+ struct dl_block *blk;
+ struct dl_codeblock *cb;
+ struct npe_info *npe;
+ int ret=0;
++ u16 crc;
+
+ if (!dev) {
+- dev = get_npe_by_id( (image->id >> 24) & 0xf);
++ dev = get_npe_by_id(IMG_NPE(image->id));
+ return_npe_dev(dev);
+ }
+ if (!dev)
+ return -ENODEV;
+
++ if (image->size > 24000) { // XXX fix max size
++ printk(KERN_ERR "npe: firmware too large\n");
++ return -EFBIG;
++ }
++
++ if (IMG_REV_MAJOR(image->id) != 2) {
++ printk(KERN_ERR "npe: only revision 2 is supported at this time\n");
++ return -EINVAL;
++ }
++
++ crc = crc16(0, (u8 *) image, IMG_SIZE(image));
++
+ npe = dev_get_drvdata(dev);
+ if (npe->loaded && (npe->usage > 0)) {
+ printk(KERN_INFO "Cowardly refusing to reload an Image "
+@@ -267,8 +272,7 @@
+
+ static void npe_firmware_probe(struct device *dev)
+ {
+-#if (defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)) \
+- && defined(MODULE)
++#ifdef CONFIG_IXP4XX_NPE_FW_LOADER
+ const struct firmware *fw_entry;
+ struct npe_info *npe = dev_get_drvdata(dev);
+ struct dl_image *image;
+@@ -477,3 +481,4 @@
+
+ EXPORT_SYMBOL(get_npe_by_id);
+ EXPORT_SYMBOL(return_npe_dev);
++EXPORT_SYMBOL(store_npe_image);
+Index: linux-2.6.20-rc3/include/asm-arm/arch-ixp4xx/platform.h
+===================================================================
+--- linux-2.6.20-rc3.orig/include/asm-arm/arch-ixp4xx/platform.h
++++ linux-2.6.20-rc3/include/asm-arm/arch-ixp4xx/platform.h
+@@ -86,6 +86,21 @@
+ unsigned long scl_pin;
+ };
+
++struct dl_block {
++ u32 type;
++ u32 offset;
++};
++
++struct dl_image {
++ u32 magic;
++ u32 id;
++ u32 size;
++ union {
++ u32 data[0];
++ struct dl_block block[0];
++ } u;
++};
++
+ struct npe_plat_data {
+ const char *name;
+ int data_size;
+@@ -105,6 +120,10 @@
+
+ };
+
++struct npe_ucode_platform_data {
++ unsigned char *mtd_partition;
++};
++
+ /*
+ * This structure provide a means for the board setup code
+ * to give information to th pata_ixp4xx driver. It is
+Index: linux-2.6.20-rc3/include/linux/ixp_npe.h
+===================================================================
+--- linux-2.6.20-rc3.orig/include/linux/ixp_npe.h
++++ linux-2.6.20-rc3/include/linux/ixp_npe.h
+@@ -99,6 +99,7 @@
+
+ extern struct device *get_npe_by_id(int id);
+ extern void return_npe_dev(struct device *dev);
++extern int store_npe_image(struct dl_image *image, struct device *dev);
+
+ /* NPE Messages */
+ extern int
diff --git a/target/linux/ixp4xx/patches/140-ixp4xx_net_driver_no_phy.patch b/target/linux/ixp4xx/patches/140-ixp4xx_net_driver_no_phy.patch
new file mode 100644
index 0000000000..4bd6875e9d
--- /dev/null
+++ b/target/linux/ixp4xx/patches/140-ixp4xx_net_driver_no_phy.patch
@@ -0,0 +1,73 @@
+diff -Nur linux-2.6.19.2/drivers/net/ixp4xx/mac_driver.c linux-2.6.19.2-owrt/drivers/net/ixp4xx/mac_driver.c
+--- linux-2.6.19.2/drivers/net/ixp4xx/mac_driver.c 2007-04-15 14:26:54.000000000 +0200
++++ linux-2.6.19.2-owrt/drivers/net/ixp4xx/mac_driver.c 2007-04-15 14:33:44.000000000 +0200
+@@ -161,6 +161,16 @@
+ {
+ struct mac_info *mac = netdev_priv(dev);
+
++ if ( mac->mii.phy_id < 0 ) {
++ if ( init ) {
++ netif_carrier_on(mac->mii.dev);
++ mac->mii.full_duplex = 1;
++ update_duplex_mode(dev);
++ return 1;
++ }
++ return 0;
++ }
++
+ if (mii_check_media(&mac->mii, netif_msg_link(mac), init)) {
+ update_duplex_mode(dev);
+ return 1;
+@@ -458,7 +468,12 @@
+ return -EINVAL;
+ if (!try_module_get(THIS_MODULE))
+ return -ENODEV;
+- rc = generic_mii_ioctl(&mac->mii, if_mii(rq), cmd, &duplex_changed);
++ if ( mac->mii.phy_id < 0 ) {
++ duplex_changed = 0;
++ rc = -EOPNOTSUPP;
++ } else {
++ rc = generic_mii_ioctl(&mac->mii, if_mii(rq), cmd, &duplex_changed);
++ }
+ module_put(THIS_MODULE);
+ if (duplex_changed)
+ update_duplex_mode(dev);
+@@ -488,6 +503,9 @@
+ static int ixmac_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct mac_info *mac = netdev_priv(dev);
++ if ( mac->mii.phy_id < 0 ) {
++ return 0;
++ }
+ mii_ethtool_gset(&mac->mii, cmd);
+ return 0;
+ }
+@@ -496,6 +514,9 @@
+ {
+ struct mac_info *mac = netdev_priv(dev);
+ int rc;
++ if ( mac->mii.phy_id < 0 ) {
++ return -EOPNOTSUPP;
++ }
+ rc = mii_ethtool_sset(&mac->mii, cmd);
+ return rc;
+ }
+@@ -503,12 +524,18 @@
+ static int ixmac_nway_reset(struct net_device *dev)
+ {
+ struct mac_info *mac = netdev_priv(dev);
++ if ( mac->mii.phy_id < 0 ) {
++ return -EOPNOTSUPP;
++ }
+ return mii_nway_restart(&mac->mii);
+ }
+
+ static u32 ixmac_get_link(struct net_device *dev)
+ {
+ struct mac_info *mac = netdev_priv(dev);
++ if ( mac->mii.phy_id < 0 ) {
++ return 1;
++ }
+ return mii_link_ok(&mac->mii);
+ }
+
diff --git a/target/linux/ixp4xx/patches/141-nslu2_setup_mac.patch b/target/linux/ixp4xx/patches/141-nslu2_setup_mac.patch
new file mode 100644
index 0000000000..cada1bd544
--- /dev/null
+++ b/target/linux/ixp4xx/patches/141-nslu2_setup_mac.patch
@@ -0,0 +1,42 @@
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
++++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
+@@ -137,6 +137,29 @@ static struct platform_device nslu2_uart
+ .resource = nslu2_uart_resources,
+ };
+
++static struct resource res_mac0 = {
++ .start = IXP4XX_EthB_BASE_PHYS,
++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct mac_plat_info plat_mac0 = {
++ .npe_id = 1,
++ .phy_id = 1,
++ .eth_id = 0,
++ .rxq_id = 27,
++ .txq_id = 24,
++ .rxdoneq_id = 4,
++};
++
++static struct platform_device mac0 = {
++ .name = "ixp4xx_mac",
++ .id = 0,
++ .dev.platform_data = &plat_mac0,
++ .num_resources = 1,
++ .resource = &res_mac0,
++};
++
+ static struct platform_device *nslu2_devices[] __initdata = {
+ &nslu2_i2c_controller,
+ &nslu2_flash,
+@@ -144,6 +166,7 @@ static struct platform_device *nslu2_dev
+ #ifdef CONFIG_LEDS_IXP4XX
+ &nslu2_leds,
+ #endif
++ &mac0
+ };
+
+ static void nslu2_power_off(void)
diff --git a/target/linux/ixp4xx/patches/142-nas100d_setup_mac.patch b/target/linux/ixp4xx/patches/142-nas100d_setup_mac.patch
new file mode 100644
index 0000000000..9256324b10
--- /dev/null
+++ b/target/linux/ixp4xx/patches/142-nas100d_setup_mac.patch
@@ -0,0 +1,41 @@
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
++++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
+@@ -123,12 +123,36 @@ static struct platform_device nas100d_ua
+ .resource = nas100d_uart_resources,
+ };
+
++static struct resource res_mac0 = {
++ .start = IXP4XX_EthB_BASE_PHYS,
++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct mac_plat_info plat_mac0 = {
++ .npe_id = 1,
++ .phy_id = 0,
++ .eth_id = 0,
++ .rxq_id = 27,
++ .txq_id = 24,
++ .rxdoneq_id = 4,
++};
++
++static struct platform_device mac0 = {
++ .name = "ixp4xx_mac",
++ .id = 0,
++ .dev.platform_data = &plat_mac0,
++ .num_resources = 1,
++ .resource = &res_mac0,
++};
++
+ static struct platform_device *nas100d_devices[] __initdata = {
+ &nas100d_i2c_controller,
+ &nas100d_flash,
+ #ifdef CONFIG_LEDS_IXP4XX
+ &nas100d_leds,
+ #endif
++ &mac0
+ };
+
+ static void nas100d_power_off(void)
diff --git a/target/linux/ixp4xx/patches/143-nslu2_mtd_microcode.patch b/target/linux/ixp4xx/patches/143-nslu2_mtd_microcode.patch
new file mode 100644
index 0000000000..adf91891f8
--- /dev/null
+++ b/target/linux/ixp4xx/patches/143-nslu2_mtd_microcode.patch
@@ -0,0 +1,35 @@
+---
+ arch/arm/mach-ixp4xx/nslu2-setup.c | 13 ++++++++++++-
+ 1 file changed, 12 insertions(+), 1 deletion(-)
+
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
++++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
+@@ -159,6 +159,16 @@ static struct platform_device mac0 = {
+ .resource = &res_mac0,
+ };
+
++struct npe_ucode_platform_data nslu2_npe_ucode_data = {
++ .mtd_partition = "FIS directory",
++};
++
++static struct platform_device nslu2_npe_ucode = {
++ .name = "ixp4xx_npe_ucode",
++ .id = 0,
++ .dev.platform_data = &nslu2_npe_ucode_data,
++};
++
+ static struct platform_device *nslu2_devices[] __initdata = {
+ &nslu2_i2c_controller,
+ &nslu2_flash,
+@@ -166,7 +176,8 @@ static struct platform_device *nslu2_dev
+ #ifdef CONFIG_LEDS_IXP4XX
+ &nslu2_leds,
+ #endif
+- &mac0
++ &mac0,
++ &nslu2_npe_ucode,
+ };
+
+ static void nslu2_power_off(void)
diff --git a/target/linux/ixp4xx/patches/144-nas100d_mtd_microcode.patch b/target/linux/ixp4xx/patches/144-nas100d_mtd_microcode.patch
new file mode 100644
index 0000000000..0794e6fd72
--- /dev/null
+++ b/target/linux/ixp4xx/patches/144-nas100d_mtd_microcode.patch
@@ -0,0 +1,34 @@
+---
+ arch/arm/mach-ixp4xx/nas100d-setup.c | 13 ++++++++++++-
+ 1 file changed, 12 insertions(+), 1 deletion(-)
+
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
++++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
+@@ -145,13 +145,24 @@ static struct platform_device mac0 = {
+ .resource = &res_mac0,
+ };
+
++struct npe_ucode_platform_data nas100d_npe_ucode_data = {
++ .mtd_partition = "microcode",
++};
++
++static struct platform_device nas100d_npe_ucode = {
++ .name = "ixp4xx_npe_ucode",
++ .id = 0,
++ .dev.platform_data = &nas100d_npe_ucode_data,
++};
++
+ static struct platform_device *nas100d_devices[] __initdata = {
+ &nas100d_i2c_controller,
+ &nas100d_flash,
+ #ifdef CONFIG_LEDS_IXP4XX
+ &nas100d_leds,
+ #endif
+- &mac0
++ &mac0,
++ &nas100d_npe_ucode,
+ };
+
+ static void nas100d_power_off(void)
diff --git a/target/linux/ixp4xx/patches/152-nas100d_mtd_load_mac.patch b/target/linux/ixp4xx/patches/152-nas100d_mtd_load_mac.patch
new file mode 100644
index 0000000000..37368861bd
--- /dev/null
+++ b/target/linux/ixp4xx/patches/152-nas100d_mtd_load_mac.patch
@@ -0,0 +1,56 @@
+---
+ arch/arm/mach-ixp4xx/nas100d-setup.c | 27 +++++++++++++++++++++++++++
+ 1 file changed, 27 insertions(+)
+
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
++++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
+@@ -16,6 +16,7 @@
+ #include <linux/serial.h>
+ #include <linux/serial_8250.h>
+ #include <linux/leds.h>
++#include <linux/mtd/mtd.h>
+
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -165,6 +166,30 @@ static struct platform_device *nas100d_d
+ &nas100d_npe_ucode,
+ };
+
++static void nas100d_flash_add(struct mtd_info *mtd)
++{
++ if (strcmp(mtd->name, "RedBoot config") == 0) {
++ size_t retlen;
++ u_char mac[6];
++
++ if (mtd->read(mtd, 0x0FD8, 6, &retlen, mac) == 0 && retlen == 6) {
++ printk(KERN_INFO "nas100d mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
++ memcpy(plat_mac0.hwaddr, mac, 6);
++ } else {
++ printk(KERN_ERR "nas100d mac: read failed\n");
++ }
++ }
++}
++
++static void nas100d_flash_remove(struct mtd_info *mtd) {
++}
++
++static struct mtd_notifier nas100d_flash_notifier = {
++ .add = nas100d_flash_add,
++ .remove = nas100d_flash_remove,
++};
++
+ static void nas100d_power_off(void)
+ {
+ /* This causes the box to drop the power and go dead. */
+@@ -196,6 +221,8 @@ static void __init nas100d_init(void)
+ (void)platform_device_register(&nas100d_uart);
+
+ platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
++
++ register_mtd_user(&nas100d_flash_notifier);
+ }
+
+ MACHINE_START(NAS100D, "Iomega NAS 100d")
diff --git a/target/linux/ixp4xx/patches/153-nslu2_mtd_load_mac.patch b/target/linux/ixp4xx/patches/153-nslu2_mtd_load_mac.patch
new file mode 100644
index 0000000000..21fe29a88d
--- /dev/null
+++ b/target/linux/ixp4xx/patches/153-nslu2_mtd_load_mac.patch
@@ -0,0 +1,56 @@
+---
+ arch/arm/mach-ixp4xx/nslu2-setup.c | 27 +++++++++++++++++++++++++++
+ 1 file changed, 27 insertions(+)
+
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
++++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
+@@ -18,6 +18,7 @@
+ #include <linux/serial.h>
+ #include <linux/serial_8250.h>
+ #include <linux/leds.h>
++#include <linux/mtd/mtd.h>
+
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -180,6 +181,30 @@ static struct platform_device *nslu2_dev
+ &nslu2_npe_ucode,
+ };
+
++static void nslu2_flash_add(struct mtd_info *mtd)
++{
++ if (strcmp(mtd->name, "RedBoot") == 0) {
++ size_t retlen;
++ u_char mac[6];
++
++ if (mtd->read(mtd, 0x3FFB0, 6, &retlen, mac) == 0 && retlen == 6) {
++ printk(KERN_INFO "nslu2 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
++ memcpy(plat_mac0.hwaddr, mac, 6);
++ } else {
++ printk(KERN_ERR "nslu2 mac: read failed\n");
++ }
++ }
++}
++
++static void nslu2_flash_remove(struct mtd_info *mtd) {
++}
++
++static struct mtd_notifier nslu2_flash_notifier = {
++ .add = nslu2_flash_add,
++ .remove = nslu2_flash_remove,
++};
++
+ static void nslu2_power_off(void)
+ {
+ /* This causes the box to drop the power and go dead. */
+@@ -210,6 +235,8 @@ static void __init nslu2_init(void)
+ (void)platform_device_register(&nslu2_uart);
+
+ platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
++
++ register_mtd_user(&nslu2_flash_notifier);
+ }
+
+ MACHINE_START(NSLU2, "Linksys NSLU2")
diff --git a/target/linux/ixp4xx/patches/160-nas100d_artop_temp_fix.patch b/target/linux/ixp4xx/patches/160-nas100d_artop_temp_fix.patch
new file mode 100644
index 0000000000..b7ac4d94c6
--- /dev/null
+++ b/target/linux/ixp4xx/patches/160-nas100d_artop_temp_fix.patch
@@ -0,0 +1,49 @@
+From: Alan Cox <alan@redhat.com>
+To: Alessandro Zummo <alessandro.zummo@towertech.it>
+Cc: Jeff Garzik <jgarzik@redhat.com>, Alan Cox <alan@redhat.com>
+Subject: Re: drivers/ata/pata_artop.c
+Date: Sun, 15 Oct 2006 14:25:16 -0400
+User-Agent: Mutt/1.4.1i
+
+On Sun, Oct 15, 2006 at 07:18:31PM +0200, Alessandro Zummo wrote:
+> In the discovery phase there's a lot of time spent in the detection
+> of the second port.
+
+The error recovery is a bit determined right now - Tejun's been doing some
+work on SRST behaviour and also for the worst cases polled detect so it
+should come out ok
+
+> What's the correct way to inform the driver
+> to avoid checking the second port?
+
+Set the number of ports to 1 in your own tree for now. The real fix is
+not to go poking at pata ports if the ret is 0xFF
+
+---
+ drivers/ata/pata_artop.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+Index: linux-2.6.19/drivers/ata/pata_artop.c
+===================================================================
+--- linux-2.6.19.orig/drivers/ata/pata_artop.c
++++ linux-2.6.19/drivers/ata/pata_artop.c
+@@ -26,6 +26,7 @@
+ #include <scsi/scsi_host.h>
+ #include <linux/libata.h>
+ #include <linux/ata.h>
++#include <asm/mach-types.h>
+
+ #define DRV_NAME "pata_artop"
+ #define DRV_VERSION "0.4.2"
+@@ -469,6 +470,11 @@ static int artop_init_one (struct pci_de
+ pci_read_config_byte(pdev, 0x4a, &reg);
+ pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
+
++ /* NAS100D workaround */
++#ifdef CONFIG_MACH_NAS100D
++ if (machine_is_nas100d())
++ ports = 1;
++#endif
+ }
+
+ BUG_ON(info == NULL);
diff --git a/target/linux/ixp4xx/patches/178-via_velocity_bigendian.patch b/target/linux/ixp4xx/patches/178-via_velocity_bigendian.patch
new file mode 100644
index 0000000000..bfff465227
--- /dev/null
+++ b/target/linux/ixp4xx/patches/178-via_velocity_bigendian.patch
@@ -0,0 +1,927 @@
+Index: linux-2.6.20-rc3/drivers/net/via-velocity.c
+===================================================================
+--- linux-2.6.20-rc3.orig/drivers/net/via-velocity.c 2007-01-02 10:30:25.892465963 +0000
++++ linux-2.6.20-rc3/drivers/net/via-velocity.c 2007-01-02 10:30:36.261113964 +0000
+@@ -96,11 +96,31 @@
+ MODULE_LICENSE("GPL");
+ MODULE_DESCRIPTION("VIA Networking Velocity Family Gigabit Ethernet Adapter Driver");
+
++/* Valid values for vdebug (additive, this is a bitmask):
++ * 0x00 => off
++ * 0x01 => always on
++ * 0x02 => additional detail on tx (rx, too, if anyone implements same)
++ * 0x04 => detail the initialization process
++ * 0x08 => spot debug detail; to be used as developers see fit
++ */
++static int vdebug = 0;
++
++/* HAIL - these macros are for the normal 0x01-type tracing... */
++#define HAIL(S) \
++ if (vdebug&1) printk(KERN_NOTICE "%s\n", (S));
++#define HAILS(S,T) \
++ if (vdebug&1) printk(KERN_NOTICE "%s -> status=0x%x\n", (S), (T));
++
+ #define VELOCITY_PARAM(N,D) \
+ static int N[MAX_UNITS]=OPTION_DEFAULT;\
+ module_param_array(N, int, NULL, 0); \
+ MODULE_PARM_DESC(N, D);
+
++#define VELO_DEBUG_MIN 0
++#define VELO_DEBUG_MAX 255
++#define VELO_DEBUG_DEF 0
++VELOCITY_PARAM(velo_debug, "Debug level");
++
+ #define RX_DESC_MIN 64
+ #define RX_DESC_MAX 255
+ #define RX_DESC_DEF 64
+@@ -385,12 +405,12 @@
+ if (val == -1)
+ *opt = def;
+ else if (val < min || val > max) {
+- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (%d-%d)\n",
+- devname, name, min, max);
++ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "via-velocity: the value of parameter %s is invalid, the valid range is (%d-%d)\n",
++ name, min, max);
+ *opt = def;
+ } else {
+- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: set value of parameter %s to %d\n",
+- devname, name, val);
++ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "via-velocity: set value of parameter %s to %d\n",
++ name, val);
+ *opt = val;
+ }
+ }
+@@ -415,12 +435,12 @@
+ if (val == -1)
+ *opt |= (def ? flag : 0);
+ else if (val < 0 || val > 1) {
+- printk(KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (0-1)\n",
+- devname, name);
++ printk(KERN_NOTICE "via-velocity: the value of parameter %s is invalid, the valid range is (0-1)\n",
++ name);
+ *opt |= (def ? flag : 0);
+ } else {
+- printk(KERN_INFO "%s: set parameter %s to %s\n",
+- devname, name, val ? "TRUE" : "FALSE");
++ printk(KERN_INFO "via-velocity: set parameter %s to %s\n",
++ name, val ? "TRUE" : "FALSE");
+ *opt |= (val ? flag : 0);
+ }
+ }
+@@ -438,6 +458,7 @@
+ static void __devinit velocity_get_options(struct velocity_opt *opts, int index, char *devname)
+ {
+
++ velocity_set_int_opt(&opts->velo_debug, velo_debug[index], VELO_DEBUG_MIN, VELO_DEBUG_MAX, VELO_DEBUG_DEF, "velo_debug", devname);
+ velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname);
+ velocity_set_int_opt(&opts->DMA_length, DMA_length[index], DMA_LENGTH_MIN, DMA_LENGTH_MAX, DMA_LENGTH_DEF, "DMA_length", devname);
+ velocity_set_int_opt(&opts->numrx, RxDescriptors[index], RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF, "RxDescriptors", devname);
+@@ -452,6 +473,7 @@
+ velocity_set_int_opt((int *) &opts->wol_opts, wol_opts[index], WOL_OPT_MIN, WOL_OPT_MAX, WOL_OPT_DEF, "Wake On Lan options", devname);
+ velocity_set_int_opt((int *) &opts->int_works, int_works[index], INT_WORKS_MIN, INT_WORKS_MAX, INT_WORKS_DEF, "Interrupt service works", devname);
+ opts->numrx = (opts->numrx & ~3);
++ vdebug = opts->velo_debug;
+ }
+
+ /**
+@@ -466,6 +488,8 @@
+ {
+ struct mac_regs __iomem * regs = vptr->mac_regs;
+
++ HAIL("velocity_init_cam_filter");
++
+ /* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */
+ WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, &regs->MCFG);
+ WORD_REG_BITS_ON(MCFG_VIDFR, &regs->MCFG);
+@@ -484,14 +508,12 @@
+ WORD_REG_BITS_ON(MCFG_RTGOPT, &regs->MCFG);
+
+ mac_set_cam(regs, 0, (u8 *) & (vptr->options.vid), VELOCITY_VLAN_ID_CAM);
+- vptr->vCAMmask[0] |= 1;
+- mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM);
+ } else {
+ u16 temp = 0;
+ mac_set_cam(regs, 0, (u8 *) &temp, VELOCITY_VLAN_ID_CAM);
+- temp = 1;
+- mac_set_cam_mask(regs, (u8 *) &temp, VELOCITY_VLAN_ID_CAM);
+ }
++ vptr->vCAMmask[0] |= 1;
++ mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM);
+ }
+
+ /**
+@@ -508,13 +530,15 @@
+ struct mac_regs __iomem * regs = vptr->mac_regs;
+ int i;
+
++ HAIL("velocity_rx_reset");
+ vptr->rd_dirty = vptr->rd_filled = vptr->rd_curr = 0;
+
+ /*
+ * Init state, all RD entries belong to the NIC
+ */
+ for (i = 0; i < vptr->options.numrx; ++i)
+- vptr->rd_ring[i].rdesc0.owner = OWNED_BY_NIC;
++ /* vptr->rd_ring[i].rdesc0.owner = OWNED_BY_NIC; BE */
++ vptr->rd_ring[i].rdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */
+
+ writew(vptr->options.numrx, &regs->RBRDU);
+ writel(vptr->rd_pool_dma, &regs->RDBaseLo);
+@@ -537,12 +561,15 @@
+ struct mac_regs __iomem * regs = vptr->mac_regs;
+ int i, mii_status;
+
++ if (vdebug&5) printk(KERN_NOTICE "velocity_init_registers: entering\n");
++
+ mac_wol_reset(regs);
+
+ switch (type) {
+ case VELOCITY_INIT_RESET:
+ case VELOCITY_INIT_WOL:
+
++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: RESET or WOL\n");
+ netif_stop_queue(vptr->dev);
+
+ /*
+@@ -570,12 +597,13 @@
+
+ case VELOCITY_INIT_COLD:
+ default:
++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: COLD or default\n");
+ /*
+ * Do reset
+ */
+ velocity_soft_reset(vptr);
++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: soft reset complete.\n");
+ mdelay(5);
+-
+ mac_eeprom_reload(regs);
+ for (i = 0; i < 6; i++) {
+ writeb(vptr->dev->dev_addr[i], &(regs->PAR[i]));
+@@ -593,11 +621,16 @@
+ */
+ BYTE_REG_BITS_SET(CFGB_OFSET, (CFGB_CRANDOM | CFGB_CAP | CFGB_MBA | CFGB_BAKOPT), &regs->CFGB);
+
++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Initializing CAM filter\n");
+ /*
+ * Init CAM filter
+ */
++ if (vdebug&8) printk(KERN_NOTICE "velocity: spot debug: about to init CAM filters\n");
++ mdelay(5); /* MJW - ARM processors, kernel 2.6.19 - this fixes oopses and hangs */
+ velocity_init_cam_filter(vptr);
++ if (vdebug&8) printk(KERN_NOTICE "velocity: spot debug: init CAM filters complete\n");
+
++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Setting packet filter\n");
+ /*
+ * Set packet filter: Receive directed and broadcast address
+ */
+@@ -607,10 +640,12 @@
+ * Enable MII auto-polling
+ */
+ enable_mii_autopoll(regs);
++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: enable_mii_autopoll complete.\n");
+
+ vptr->int_mask = INT_MASK_DEF;
+
+- writel(cpu_to_le32(vptr->rd_pool_dma), &regs->RDBaseLo);
++ /* writel(cpu_to_le32(vptr->rd_pool_dma), &regs->RDBaseLo); BE */
++ writel((vptr->rd_pool_dma), &regs->RDBaseLo); /* BE */
+ writew(vptr->options.numrx - 1, &regs->RDCSize);
+ mac_rx_queue_run(regs);
+ mac_rx_queue_wake(regs);
+@@ -618,10 +653,13 @@
+ writew(vptr->options.numtx - 1, &regs->TDCSize);
+
+ for (i = 0; i < vptr->num_txq; i++) {
+- writel(cpu_to_le32(vptr->td_pool_dma[i]), &(regs->TDBaseLo[i]));
++ /* writel(cpu_to_le32(vptr->td_pool_dma[i]), &(regs->TDBaseLo[i])); BE */
++ writel((vptr->td_pool_dma[i]), &(regs->TDBaseLo[i])); /* BE */
+ mac_tx_queue_run(regs, i);
+ }
+
++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: DMA settings complete.\n");
++
+ init_flow_control_register(vptr);
+
+ writel(CR0_STOP, &regs->CR0Clr);
+@@ -640,8 +678,10 @@
+
+ enable_flow_control_ability(vptr);
+ mac_hw_mibs_init(regs);
++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Set interrupt mask\n");
+ mac_write_int_mask(vptr->int_mask, regs);
+ mac_clear_isr(regs);
++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: complete.\n");
+
+ }
+ }
+@@ -659,6 +699,7 @@
+ struct mac_regs __iomem * regs = vptr->mac_regs;
+ int i = 0;
+
++ HAIL("velocity_soft_reset");
+ writel(CR0_SFRST, &regs->CR0Set);
+
+ for (i = 0; i < W_MAX_TIMEOUT; i++) {
+@@ -722,6 +763,7 @@
+ VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION);
+ printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n");
+ printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n");
++ printk(KERN_INFO "BE support, misc. fixes MJW 01Jan2007 - may be unstable\n");
+ first = 0;
+ }
+
+@@ -935,6 +977,7 @@
+ dma_addr_t pool_dma;
+ u8 *pool;
+
++ HAIL("velocity_init_rings");
+ /*
+ * Allocate all RD/TD rings a single pool
+ */
+@@ -997,6 +1040,7 @@
+ static void velocity_free_rings(struct velocity_info *vptr)
+ {
+ int size;
++ HAIL("velocity_free_rings");
+
+ size = vptr->options.numrx * sizeof(struct rx_desc) +
+ vptr->options.numtx * sizeof(struct tx_desc) * vptr->num_txq;
+@@ -1013,6 +1057,7 @@
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int avail, dirty, unusable;
+
++ HAIL("velocity_give_many_rx_descs");
+ /*
+ * RD number must be equal to 4X per hardware spec
+ * (programming guide rev 1.20, p.13)
+@@ -1026,7 +1071,8 @@
+ dirty = vptr->rd_dirty - unusable;
+ for (avail = vptr->rd_filled & 0xfffc; avail; avail--) {
+ dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
+- vptr->rd_ring[dirty].rdesc0.owner = OWNED_BY_NIC;
++ /* vptr->rd_ring[dirty].rdesc0.owner = OWNED_BY_NIC; BE */
++ vptr->rd_ring[dirty].rdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */
+ }
+
+ writew(vptr->rd_filled & 0xfffc, &regs->RBRDU);
+@@ -1036,12 +1082,14 @@
+ static int velocity_rx_refill(struct velocity_info *vptr)
+ {
+ int dirty = vptr->rd_dirty, done = 0, ret = 0;
++ HAIL("velocity_rx_refill");
+
+ do {
+ struct rx_desc *rd = vptr->rd_ring + dirty;
+
+ /* Fine for an all zero Rx desc at init time as well */
+- if (rd->rdesc0.owner == OWNED_BY_NIC)
++ /* if (rd->rdesc0.owner == OWNED_BY_NIC) BE */
++ if (rd->rdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */
+ break;
+
+ if (!vptr->rd_info[dirty].skb) {
+@@ -1076,6 +1124,7 @@
+ unsigned int rsize = sizeof(struct velocity_rd_info) *
+ vptr->options.numrx;
+
++ HAIL("velocity_init_rd_ring");
+ vptr->rd_info = kmalloc(rsize, GFP_KERNEL);
+ if(vptr->rd_info == NULL)
+ goto out;
+@@ -1105,6 +1154,7 @@
+ {
+ int i;
+
++ HAIL("velocity_free_rd_ring");
+ if (vptr->rd_info == NULL)
+ return;
+
+@@ -1146,6 +1196,7 @@
+ unsigned int tsize = sizeof(struct velocity_td_info) *
+ vptr->options.numtx;
+
++ HAIL("velocity_init_td_ring");
+ /* Init the TD ring entries */
+ for (j = 0; j < vptr->num_txq; j++) {
+ curr = vptr->td_pool_dma[j];
+@@ -1182,6 +1233,7 @@
+ struct velocity_td_info * td_info = &(vptr->td_infos[q][n]);
+ int i;
+
++ HAIL("velocity_free_td_ring_entry");
+ if (td_info == NULL)
+ return;
+
+@@ -1211,6 +1263,7 @@
+ {
+ int i, j;
+
++ HAIL("velocity_free_td_ring");
+ for (j = 0; j < vptr->num_txq; j++) {
+ if (vptr->td_infos[j] == NULL)
+ continue;
+@@ -1238,34 +1291,42 @@
+ struct net_device_stats *stats = &vptr->stats;
+ int rd_curr = vptr->rd_curr;
+ int works = 0;
++ u16 wRSR; /* BE */
+
++ HAILS("velocity_rx_srv", status);
+ do {
+ struct rx_desc *rd = vptr->rd_ring + rd_curr;
+
+ if (!vptr->rd_info[rd_curr].skb)
+ break;
+
+- if (rd->rdesc0.owner == OWNED_BY_NIC)
++ /* if (rd->rdesc0.owner == OWNED_BY_NIC) BE */
++ if (rd->rdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */
+ break;
+
+ rmb();
+
++ wRSR = (u16)(cpu_to_le32(rd->rdesc0)); /* BE */
+ /*
+ * Don't drop CE or RL error frame although RXOK is off
+ */
+- if ((rd->rdesc0.RSR & RSR_RXOK) || (!(rd->rdesc0.RSR & RSR_RXOK) && (rd->rdesc0.RSR & (RSR_CE | RSR_RL)))) {
++ /* if ((rd->rdesc0.RSR & RSR_RXOK) || (!(rd->rdesc0.RSR & RSR_RXOK) && (rd->rdesc0.RSR & (RSR_CE | RSR_RL)))) { BE */
++ if ((wRSR & RSR_RXOK) || (!(wRSR & RSR_RXOK) && (wRSR & (RSR_CE | RSR_RL)))) { /* BE */
+ if (velocity_receive_frame(vptr, rd_curr) < 0)
+ stats->rx_dropped++;
+ } else {
+- if (rd->rdesc0.RSR & RSR_CRC)
++ /* if (rd->rdesc0.RSR & RSR_CRC) BE */
++ if (wRSR & RSR_CRC) /* BE */
+ stats->rx_crc_errors++;
+- if (rd->rdesc0.RSR & RSR_FAE)
++ /* if (rd->rdesc0.RSR & RSR_FAE) BE */
++ if (wRSR & RSR_FAE) /* BE */
+ stats->rx_frame_errors++;
+
+ stats->rx_dropped++;
+ }
+
+- rd->inten = 1;
++ /* rd->inten = 1; BE */
++ rd->ltwo |= cpu_to_le32(BE_INT_ENABLE); /* BE */
+
+ vptr->dev->last_rx = jiffies;
+
+@@ -1296,13 +1357,21 @@
+
+ static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb)
+ {
++ u8 bCSM;
++ HAIL("velocity_rx_csum");
+ skb->ip_summed = CHECKSUM_NONE;
+
+- if (rd->rdesc1.CSM & CSM_IPKT) {
+- if (rd->rdesc1.CSM & CSM_IPOK) {
+- if ((rd->rdesc1.CSM & CSM_TCPKT) ||
+- (rd->rdesc1.CSM & CSM_UDPKT)) {
+- if (!(rd->rdesc1.CSM & CSM_TUPOK)) {
++// if (rd->rdesc1.CSM & CSM_IPKT) {
++// if (rd->rdesc1.CSM & CSM_IPOK) {
++// if ((rd->rdesc1.CSM & CSM_TCPKT) ||
++// (rd->rdesc1.CSM & CSM_UDPKT)) {
++// if (!(rd->rdesc1.CSM & CSM_TUPOK)) {
++ bCSM = (u8)(cpu_to_le32(rd->rdesc1) >> 16); /* BE */
++ if (bCSM & CSM_IPKT) {
++ if (bCSM & CSM_IPOK) {
++ if ((bCSM & CSM_TCPKT) ||
++ (bCSM & CSM_UDPKT)) {
++ if (!(bCSM & CSM_TUPOK)) { /* BE */
+ return;
+ }
+ }
+@@ -1328,9 +1397,11 @@
+ {
+ int ret = -1;
+
++ HAIL("velocity_rx_copy");
+ if (pkt_size < rx_copybreak) {
+ struct sk_buff *new_skb;
+
++ HAIL("velocity_rx_copy (working...)");
+ new_skb = dev_alloc_skb(pkt_size + 2);
+ if (new_skb) {
+ new_skb->dev = vptr->dev;
+@@ -1360,10 +1431,12 @@
+ static inline void velocity_iph_realign(struct velocity_info *vptr,
+ struct sk_buff *skb, int pkt_size)
+ {
++ HAIL("velocity_iph_realign");
+ /* FIXME - memmove ? */
+ if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) {
+ int i;
+
++ HAIL("velocity_iph_realign (working...)");
+ for (i = pkt_size; i >= 0; i--)
+ *(skb->data + i + 2) = *(skb->data + i);
+ skb_reserve(skb, 2);
+@@ -1382,19 +1455,27 @@
+ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
+ {
+ void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int);
++ u16 pkt_len; /* BE */
++ u16 wRSR; /* BE */
++ struct sk_buff *skb;
+ struct net_device_stats *stats = &vptr->stats;
+ struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
+ struct rx_desc *rd = &(vptr->rd_ring[idx]);
+- int pkt_len = rd->rdesc0.len;
+- struct sk_buff *skb;
++ /* int pkt_len = rd->rdesc0.len BE */;
++
++ pkt_len = ((cpu_to_le32(rd->rdesc0) >> 16) & 0x00003FFFUL); /* BE */
++ wRSR = (u16)(cpu_to_le32(rd->rdesc0)); /* BE */
+
+- if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) {
++ HAIL("velocity_receive_frame");
++ /* if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) { BE */
++ if (wRSR & (RSR_STP | RSR_EDP)) { /* BE */
+ VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->dev->name);
+ stats->rx_length_errors++;
+ return -EINVAL;
+ }
+
+- if (rd->rdesc0.RSR & RSR_MAR)
++ /* if (rd->rdesc0.RSR & RSR_MAR) BE */
++ if (wRSR & RSR_MAR) /* BE */
+ vptr->stats.multicast++;
+
+ skb = rd_info->skb;
+@@ -1408,7 +1489,8 @@
+ */
+
+ if (vptr->flags & VELOCITY_FLAGS_VAL_PKT_LEN) {
+- if (rd->rdesc0.RSR & RSR_RL) {
++ /* if (rd->rdesc0.RSR & RSR_RL) { BE */
++ if (wRSR & RSR_RL) { /* BE */
+ stats->rx_length_errors++;
+ return -EINVAL;
+ }
+@@ -1452,6 +1534,7 @@
+ struct rx_desc *rd = &(vptr->rd_ring[idx]);
+ struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
+
++ HAIL("velocity_alloc_rx_buf");
+ rd_info->skb = dev_alloc_skb(vptr->rx_buf_sz + 64);
+ if (rd_info->skb == NULL)
+ return -ENOMEM;
+@@ -1469,10 +1552,14 @@
+ */
+
+ *((u32 *) & (rd->rdesc0)) = 0;
+- rd->len = cpu_to_le32(vptr->rx_buf_sz);
+- rd->inten = 1;
++ /* rd->len = cpu_to_le32(vptr->rx_buf_sz); BE */
++ /* rd->inten = 1; BE */
+ rd->pa_low = cpu_to_le32(rd_info->skb_dma);
+- rd->pa_high = 0;
++ /* rd->pa_high = 0; BE */
++ rd->ltwo &= cpu_to_le32(0xC000FFFFUL); /* BE */
++ rd->ltwo |= cpu_to_le32((vptr->rx_buf_sz << 16)); /* BE */
++ rd->ltwo |= cpu_to_le32(BE_INT_ENABLE); /* BE */
++ rd->ltwo &= cpu_to_le32(0xFFFF0000UL); /* BE */
+ return 0;
+ }
+
+@@ -1493,9 +1580,11 @@
+ int full = 0;
+ int idx;
+ int works = 0;
++ u16 wTSR; /* BE */
+ struct velocity_td_info *tdinfo;
+ struct net_device_stats *stats = &vptr->stats;
+
++ HAILS("velocity_tx_srv", status);
+ for (qnum = 0; qnum < vptr->num_txq; qnum++) {
+ for (idx = vptr->td_tail[qnum]; vptr->td_used[qnum] > 0;
+ idx = (idx + 1) % vptr->options.numtx) {
+@@ -1506,22 +1595,29 @@
+ td = &(vptr->td_rings[qnum][idx]);
+ tdinfo = &(vptr->td_infos[qnum][idx]);
+
+- if (td->tdesc0.owner == OWNED_BY_NIC)
++ /* if (td->tdesc0.owner == OWNED_BY_NIC) BE */
++ if (td->tdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */
+ break;
+
+ if ((works++ > 15))
+ break;
+
+- if (td->tdesc0.TSR & TSR0_TERR) {
++ wTSR = (u16)cpu_to_le32(td->tdesc0);
++ /* if (td->tdesc0.TSR & TSR0_TERR) { BE */
++ if (wTSR & TSR0_TERR) { /* BE */
+ stats->tx_errors++;
+ stats->tx_dropped++;
+- if (td->tdesc0.TSR & TSR0_CDH)
++ /* if (td->tdesc0.TSR & TSR0_CDH) BE */
++ if (wTSR & TSR0_CDH) /* BE */
+ stats->tx_heartbeat_errors++;
+- if (td->tdesc0.TSR & TSR0_CRS)
++ /* if (td->tdesc0.TSR & TSR0_CRS) BE */
++ if (wTSR & TSR0_CRS) /* BE */
+ stats->tx_carrier_errors++;
+- if (td->tdesc0.TSR & TSR0_ABT)
++ /* if (td->tdesc0.TSR & TSR0_ABT) BE */
++ if (wTSR & TSR0_ABT) /* BE */
+ stats->tx_aborted_errors++;
+- if (td->tdesc0.TSR & TSR0_OWC)
++ /* if (td->tdesc0.TSR & TSR0_OWC) BE */
++ if (wTSR & TSR0_OWC) /* BE */
+ stats->tx_window_errors++;
+ } else {
+ stats->tx_packets++;
+@@ -1610,6 +1706,7 @@
+
+ static void velocity_error(struct velocity_info *vptr, int status)
+ {
++ HAILS("velocity_error", status);
+
+ if (status & ISR_TXSTLI) {
+ struct mac_regs __iomem * regs = vptr->mac_regs;
+@@ -1699,6 +1796,7 @@
+ struct sk_buff *skb = tdinfo->skb;
+ int i;
+
++ HAIL("velocity_free_tx_buf");
+ /*
+ * Don't unmap the pre-allocated tx_bufs
+ */
+@@ -1902,6 +2000,7 @@
+ struct velocity_td_info *tdinfo;
+ unsigned long flags;
+ int index;
++ u32 lbufsz; /* BE */
+
+ int pktlen = skb->len;
+
+@@ -1918,9 +2017,18 @@
+ td_ptr = &(vptr->td_rings[qnum][index]);
+ tdinfo = &(vptr->td_infos[qnum][index]);
+
+- td_ptr->tdesc1.TCPLS = TCPLS_NORMAL;
+- td_ptr->tdesc1.TCR = TCR0_TIC;
+- td_ptr->td_buf[0].queue = 0;
++ td_ptr->tdesc0 = 0x00000000UL; /* BE */
++ td_ptr->tdesc1 = 0x00000000UL; /* BE */
++
++ /* td_ptr->tdesc1.TCPLS = TCPLS_NORMAL; BE */
++ td_ptr->tdesc1 &= cpu_to_le32(0xfcffffffUL); /* BE */
++ td_ptr->tdesc1 |= cpu_to_le32(((u32)TCPLS_NORMAL) << 24); /* BE */
++
++ /* td_ptr->tdesc1.TCR = TCR0_TIC; BE */
++ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_TIC); /* BE */
++
++ /* td_ptr->td_buf[0].queue = 0; BE */
++ td_ptr->td_buf[0].ltwo &= cpu_to_le32(~BE_QUEUE_ENABLE); /* BE */
+
+ /*
+ * Pad short frames.
+@@ -1932,20 +2040,35 @@
+ memset(tdinfo->buf + skb->len, 0, ETH_ZLEN - skb->len);
+ tdinfo->skb = skb;
+ tdinfo->skb_dma[0] = tdinfo->buf_dma;
+- td_ptr->tdesc0.pktsize = pktlen;
++ /* td_ptr->tdesc0.pktsize = pktlen; */
++ td_ptr->tdesc0 &= cpu_to_le32(0xc000ffffUL); /* BE */
++ lbufsz = pktlen; /* Assign, and make sure it's unsigned 32 bits - BE */
++ lbufsz = lbufsz << 16; /* BE - shift over */
++ td_ptr->tdesc0 |= cpu_to_le32(lbufsz); /* BE */
+ td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
+- td_ptr->td_buf[0].pa_high = 0;
+- td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize;
++ /* td_ptr->td_buf[0].pa_high = 0; */
++ /* td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; */
++ td_ptr->td_buf[0].ltwo = cpu_to_le32(lbufsz); /* BE */
+ tdinfo->nskb_dma = 1;
+- td_ptr->tdesc1.CMDZ = 2;
++ /* td_ptr->tdesc1.CMDZ = 2; */
++ td_ptr->tdesc1 &= cpu_to_le32(0x0fffffffUL); /* BE */
++ td_ptr->tdesc1 |= cpu_to_le32(((u32)0x2) << 28); /* BE */
+ } else
+ #ifdef VELOCITY_ZERO_COPY_SUPPORT
++ /*
++ * BE - NOTE on the VELOCITY_ZERO_COPY_SUPPORT:
++ * This block of code has NOT been patched up for BE support, as
++ * it is certainly broken -- if it compiles at all. Since the BE
++ * fixes depend on the broken code, attempts to convert to BE support
++ * would almost certainly confuse more than help.
++ */
+ if (skb_shinfo(skb)->nr_frags > 0) {
+ int nfrags = skb_shinfo(skb)->nr_frags;
+ tdinfo->skb = skb;
+ if (nfrags > 6) {
+ memcpy(tdinfo->buf, skb->data, skb->len);
+ tdinfo->skb_dma[0] = tdinfo->buf_dma;
++ /* BE: Er, exactly what value are we assigning in this next line? */
+ td_ptr->tdesc0.pktsize =
+ td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
+ td_ptr->td_buf[0].pa_high = 0;
+@@ -1962,6 +2085,7 @@
+ /* FIXME: support 48bit DMA later */
+ td_ptr->td_buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma);
+ td_ptr->td_buf[i].pa_high = 0;
++ /* BE: This next line can't be right: */
+ td_ptr->td_buf[i].bufsize = skb->len->skb->data_len;
+
+ for (i = 0; i < nfrags; i++) {
+@@ -1979,7 +2103,7 @@
+ }
+
+ } else
+-#endif
++#endif /* (broken) VELOCITY_ZERO_COPY_SUPPORT */
+ {
+ /*
+ * Map the linear network buffer into PCI space and
+@@ -1987,19 +2111,30 @@
+ */
+ tdinfo->skb = skb;
+ tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE);
+- td_ptr->tdesc0.pktsize = pktlen;
++ /* td_ptr->tdesc0.pktsize = pktlen; BE */
++ td_ptr->tdesc0 &= cpu_to_le32(0xc000ffffUL); /* BE */
++ lbufsz = pktlen; /* Assign, and make sure it's unsigned 32 bits - BE */
++ lbufsz = lbufsz << 16; /* BE */
++ td_ptr->tdesc0 |= cpu_to_le32(lbufsz); /* BE */
+ td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
+- td_ptr->td_buf[0].pa_high = 0;
+- td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize;
++ /* td_ptr->td_buf[0].pa_high = 0; BE */
++ /* td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; BE */
++ td_ptr->td_buf[0].ltwo = cpu_to_le32(lbufsz); /* BE */
++
+ tdinfo->nskb_dma = 1;
+- td_ptr->tdesc1.CMDZ = 2;
++ /* td_ptr->tdesc1.CMDZ = 2; BE */
++ td_ptr->tdesc1 &= cpu_to_le32(0x0fffffffUL); /* BE */
++ td_ptr->tdesc1 |= cpu_to_le32(((u32)0x2) << 28);/* BE */
+ }
+
+ if (vptr->flags & VELOCITY_FLAGS_TAGGING) {
+- td_ptr->tdesc1.pqinf.VID = (vptr->options.vid & 0xfff);
+- td_ptr->tdesc1.pqinf.priority = 0;
+- td_ptr->tdesc1.pqinf.CFI = 0;
+- td_ptr->tdesc1.TCR |= TCR0_VETAG;
++ /* td_ptr->tdesc1.pqinf.priority = 0; BE */
++ /* td_ptr->tdesc1.pqinf.CFI = 0; BE */
++ td_ptr->tdesc1 &= cpu_to_le32(0xFFFF0000UL); /* BE */
++ /* td_ptr->tdesc1.pqinf.VID = (vptr->options.vid & 0xfff); BE */
++ td_ptr->tdesc1 |= cpu_to_le32((vptr->options.vid & 0xfff)); /* BE */
++ /* td_ptr->tdesc1.TCR |= TCR0_VETAG; BE */
++ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_VETAG); /* BE */
+ }
+
+ /*
+@@ -2009,26 +2144,34 @@
+ && (skb->ip_summed == CHECKSUM_PARTIAL)) {
+ struct iphdr *ip = skb->nh.iph;
+ if (ip->protocol == IPPROTO_TCP)
+- td_ptr->tdesc1.TCR |= TCR0_TCPCK;
++ /* td_ptr->tdesc1.TCR |= TCR0_TCPCK; BE */
++ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_TCPCK); /* BE */
+ else if (ip->protocol == IPPROTO_UDP)
+- td_ptr->tdesc1.TCR |= (TCR0_UDPCK);
+- td_ptr->tdesc1.TCR |= TCR0_IPCK;
+- }
++ /* td_ptr->tdesc1.TCR |= (TCR0_UDPCK); BE */
++ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_UDPCK); /* BE */
++ /* td_ptr->tdesc1.TCR |= TCR0_IPCK; BE */
++ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_IPCK); /* BE */
++ }
+ {
+
+ int prev = index - 1;
+
+ if (prev < 0)
+ prev = vptr->options.numtx - 1;
+- td_ptr->tdesc0.owner = OWNED_BY_NIC;
++ /* td_ptr->tdesc0.owner = OWNED_BY_NIC; BE */
++ td_ptr->tdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */
+ vptr->td_used[qnum]++;
+ vptr->td_curr[qnum] = (index + 1) % vptr->options.numtx;
+
+ if (AVAIL_TD(vptr, qnum) < 1)
+ netif_stop_queue(dev);
+
+- td_ptr = &(vptr->td_rings[qnum][prev]);
+- td_ptr->td_buf[0].queue = 1;
++ td_ptr = &(vptr->td_rings[qnum][prev]);
++ /* td_ptr->td_buf[0].queue = 1; BE */
++ td_ptr->td_buf[0].ltwo |= cpu_to_le32(BE_QUEUE_ENABLE); /* BE */
++ if (vdebug&2) printk(KERN_NOTICE "velocity_xmit: (%s) len=%d idx=%d tdesc0=0x%x tdesc1=0x%x ltwo=0x%x\n",
++ (pktlen<ETH_ZLEN) ? "short" : "normal", pktlen, index,
++ td_ptr->tdesc0, td_ptr->tdesc1, td_ptr->td_buf[0].ltwo);
+ mac_tx_queue_wake(vptr->mac_regs, qnum);
+ }
+ dev->trans_start = jiffies;
+@@ -2054,7 +2197,7 @@
+ u32 isr_status;
+ int max_count = 0;
+
+-
++ HAIL("velocity_intr");
+ spin_lock(&vptr->lock);
+ isr_status = mac_read_isr(vptr->mac_regs);
+
+@@ -2073,7 +2216,10 @@
+
+ while (isr_status != 0) {
+ mac_write_isr(vptr->mac_regs, isr_status);
+- if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
++ HAILS("velocity_intr",isr_status);
++ /* MJW - velocity_error is ALWAYS called; need to mask off some other flags */
++ /* if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI))) */
++ if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI | ISR_PTX0I | ISR_ISR0)))
+ velocity_error(vptr, isr_status);
+ if (isr_status & (ISR_PRXI | ISR_PPRXI))
+ max_count += velocity_rx_srv(vptr, isr_status);
+@@ -2111,6 +2257,7 @@
+ int i;
+ struct dev_mc_list *mclist;
+
++ HAIL("velocity_set_multi");
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+ writel(0xffffffff, &regs->MARCAM[0]);
+ writel(0xffffffff, &regs->MARCAM[4]);
+@@ -2154,6 +2301,7 @@
+ {
+ struct velocity_info *vptr = netdev_priv(dev);
+
++ HAIL("net_device_stats");
+ /* If the hardware is down, don't touch MII */
+ if(!netif_running(dev))
+ return &vptr->stats;
+@@ -2198,6 +2346,7 @@
+ struct velocity_info *vptr = netdev_priv(dev);
+ int ret;
+
++ HAIL("velocity_ioctl");
+ /* If we are asked for information and the device is power
+ saving then we need to bring the device back up to talk to it */
+
+@@ -2416,6 +2565,7 @@
+ {
+ u16 ww;
+
++ HAIL("velocity_mii_read");
+ /*
+ * Disable MIICR_MAUTO, so that mii addr can be set normally
+ */
+@@ -2452,6 +2602,7 @@
+ {
+ u16 ww;
+
++ HAIL("velocity_mii_write");
+ /*
+ * Disable MIICR_MAUTO, so that mii addr can be set normally
+ */
+Index: linux-2.6.20-rc3/drivers/net/via-velocity.h
+===================================================================
+--- linux-2.6.20-rc3.orig/drivers/net/via-velocity.h 2006-11-29 21:57:37.000000000 +0000
++++ linux-2.6.20-rc3/drivers/net/via-velocity.h 2007-01-02 10:30:36.265114211 +0000
+@@ -196,64 +196,70 @@
+ * Receive descriptor
+ */
+
+-struct rdesc0 {
+- u16 RSR; /* Receive status */
+- u16 len:14; /* Received packet length */
+- u16 reserved:1;
+- u16 owner:1; /* Who owns this buffer ? */
+-};
+-
+-struct rdesc1 {
+- u16 PQTAG;
+- u8 CSM;
+- u8 IPKT;
+-};
++//struct rdesc0 {
++// u16 RSR; /* Receive status */
++// u16 len:14; /* Received packet length */
++// u16 reserved:1;
++// u16 owner:1; /* Who owns this buffer ? */
++//};
++
++//struct rdesc1 {
++// u16 PQTAG;
++// u8 CSM;
++// u8 IPKT;
++//};
+
+ struct rx_desc {
+- struct rdesc0 rdesc0;
+- struct rdesc1 rdesc1;
++// struct rdesc0 rdesc0;
++// struct rdesc1 rdesc1;
++ u32 rdesc0;
++ u32 rdesc1;
+ u32 pa_low; /* Low 32 bit PCI address */
+- u16 pa_high; /* Next 16 bit PCI address (48 total) */
+- u16 len:15; /* Frame size */
+- u16 inten:1; /* Enable interrupt */
++// u16 pa_high; /* Next 16 bit PCI address (48 total) */
++// u16 len:15; /* Frame size */
++// u16 inten:1; /* Enable interrupt */
++ u32 ltwo;
+ } __attribute__ ((__packed__));
+
+ /*
+ * Transmit descriptor
+ */
+
+-struct tdesc0 {
+- u16 TSR; /* Transmit status register */
+- u16 pktsize:14; /* Size of frame */
+- u16 reserved:1;
+- u16 owner:1; /* Who owns the buffer */
+-};
+-
+-struct pqinf { /* Priority queue info */
+- u16 VID:12;
+- u16 CFI:1;
+- u16 priority:3;
+-} __attribute__ ((__packed__));
+-
+-struct tdesc1 {
+- struct pqinf pqinf;
+- u8 TCR;
+- u8 TCPLS:2;
+- u8 reserved:2;
+- u8 CMDZ:4;
+-} __attribute__ ((__packed__));
++//struct tdesc0 {
++// u16 TSR; /* Transmit status register */
++// u16 pktsize:14; /* Size of frame */
++// u16 reserved:1;
++// u16 owner:1; /* Who owns the buffer */
++//};
++
++//struct pqinf { /* Priority queue info */
++// u16 VID:12;
++// u16 CFI:1;
++// u16 priority:3;
++//} __attribute__ ((__packed__));
++
++//struct tdesc1 {
++// struct pqinf pqinf;
++// u8 TCR;
++// u8 TCPLS:2;
++// u8 reserved:2;
++// u8 CMDZ:4;
++//} __attribute__ ((__packed__));
+
+ struct td_buf {
+ u32 pa_low;
+- u16 pa_high;
+- u16 bufsize:14;
+- u16 reserved:1;
+- u16 queue:1;
++// u16 pa_high;
++// u16 bufsize:14;
++// u16 reserved:1;
++// u16 queue:1;
++ u32 ltwo;
+ } __attribute__ ((__packed__));
+
+ struct tx_desc {
+- struct tdesc0 tdesc0;
+- struct tdesc1 tdesc1;
++// struct tdesc0 tdesc0;
++// struct tdesc1 tdesc1;
++ u32 tdesc0;
++ u32 tdesc1;
+ struct td_buf td_buf[7];
+ };
+
+@@ -279,6 +285,16 @@
+ OWNED_BY_NIC = 1
+ };
+
++/* Constants added for the BE fixes */
++#define BE_OWNED_BY_NIC 0x80000000UL
++#define BE_INT_ENABLE 0x80000000UL
++#define BE_QUEUE_ENABLE 0x80000000UL
++#define BE_TCR_TIC 0x00800000UL
++#define BE_TCR_VETAG 0x00200000UL
++#define BE_TCR_TCPCK 0x00040000UL
++#define BE_TCR_UDPCK 0x00080000UL
++#define BE_TCR_IPCK 0x00100000UL
++
+
+ /*
+ * MAC registers and macros.
+@@ -1698,6 +1714,7 @@
+ };
+
+ struct velocity_opt {
++ int velo_debug; /* debug flag */
+ int numrx; /* Number of RX descriptors */
+ int numtx; /* Number of TX descriptors */
+ enum speed_opt spd_dpx; /* Media link mode */
diff --git a/target/linux/ixp4xx/patches/185-nslu2_rtc_fixup.patch b/target/linux/ixp4xx/patches/185-nslu2_rtc_fixup.patch
new file mode 100644
index 0000000000..2c379d2648
--- /dev/null
+++ b/target/linux/ixp4xx/patches/185-nslu2_rtc_fixup.patch
@@ -0,0 +1,54 @@
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
++++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
+@@ -20,6 +20,7 @@
+ #include <linux/leds.h>
+ #include <linux/mtd/mtd.h>
+
++#include <asm/setup.h>
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
+@@ -239,11 +240,41 @@ static void __init nslu2_init(void)
+ register_mtd_user(&nslu2_flash_notifier);
+ }
+
++static char nslu2_rtc_probe[] __initdata = "rtc-x1205.probe=0,0x6f ";
++
++static void __init nslu2_fixup(struct machine_desc *desc,
++ struct tag *tags, char **cmdline, struct meminfo *mi)
++{
++ struct tag *t = tags;
++ char *p = *cmdline;
++
++ /* Find the end of the tags table, taking note of any cmdline tag. */
++ for (; t->hdr.size; t = tag_next(t)) {
++ if (t->hdr.tag == ATAG_CMDLINE) {
++ p = t->u.cmdline.cmdline;
++ }
++ }
++
++ /* Overwrite the end of the table with a new cmdline tag. */
++ t->hdr.tag = ATAG_CMDLINE;
++ t->hdr.size = (sizeof (struct tag_header) +
++ strlen(nslu2_rtc_probe) + strlen(p) + 1 + 4) >> 2;
++ strlcpy(t->u.cmdline.cmdline, nslu2_rtc_probe, COMMAND_LINE_SIZE);
++ strlcpy(t->u.cmdline.cmdline + strlen(nslu2_rtc_probe), p,
++ COMMAND_LINE_SIZE - strlen(nslu2_rtc_probe));
++
++ /* Terminate the table. */
++ t = tag_next(t);
++ t->hdr.tag = ATAG_NONE;
++ t->hdr.size = 0;
++}
++
+ MACHINE_START(NSLU2, "Linksys NSLU2")
+ /* Maintainer: www.nslu2-linux.org */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
++ .fixup = nslu2_fixup,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches/186-nas100d_rtc_fixup.patch b/target/linux/ixp4xx/patches/186-nas100d_rtc_fixup.patch
new file mode 100644
index 0000000000..f594802d2f
--- /dev/null
+++ b/target/linux/ixp4xx/patches/186-nas100d_rtc_fixup.patch
@@ -0,0 +1,55 @@
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
++++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
+@@ -18,6 +18,7 @@
+ #include <linux/leds.h>
+ #include <linux/mtd/mtd.h>
+
++#include <asm/setup.h>
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
+@@ -225,11 +226,42 @@ static void __init nas100d_init(void)
+ register_mtd_user(&nas100d_flash_notifier);
+ }
+
++static char nas100d_rtc_probe[] __initdata = "rtc-pcf8563.probe=0,0x51 ";
++
++static void __init nas100d_fixup(struct machine_desc *desc,
++ struct tag *tags, char **cmdline, struct meminfo *mi)
++{
++ struct tag *t = tags;
++ char *p = *cmdline;
++
++ /* Find the end of the tags table, taking note of any cmdline tag. */
++ for (; t->hdr.size; t = tag_next(t)) {
++ if (t->hdr.tag == ATAG_CMDLINE) {
++ p = t->u.cmdline.cmdline;
++ }
++ }
++
++ /* Overwrite the end of the table with a new cmdline tag. */
++ t->hdr.tag = ATAG_CMDLINE;
++ t->hdr.size =
++ (sizeof (struct tag_header) +
++ strlen(nas100d_rtc_probe) + strlen(p) + 1 + 4) >> 2;
++ strlcpy(t->u.cmdline.cmdline, nas100d_rtc_probe, COMMAND_LINE_SIZE);
++ strlcpy(t->u.cmdline.cmdline + strlen(nas100d_rtc_probe), p,
++ COMMAND_LINE_SIZE - strlen(nas100d_rtc_probe));
++
++ /* Terminate the table. */
++ t = tag_next(t);
++ t->hdr.tag = ATAG_NONE;
++ t->hdr.size = 0;
++}
++
+ MACHINE_START(NAS100D, "Iomega NAS 100d")
+ /* Maintainer: www.nslu2-linux.org */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
++ .fixup = nas100d_fixup,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches/187-dsmg600_rtc_fixup.patch b/target/linux/ixp4xx/patches/187-dsmg600_rtc_fixup.patch
new file mode 100644
index 0000000000..04e51cd0c3
--- /dev/null
+++ b/target/linux/ixp4xx/patches/187-dsmg600_rtc_fixup.patch
@@ -0,0 +1,57 @@
+Index: linux-2.6.21-arm/arch/arm/mach-ixp4xx/dsmg600-setup.c
+===================================================================
+--- linux-2.6.21-arm.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c 2007-05-07 11:29:44.000000000 -0700
++++ linux-2.6.21-arm/arch/arm/mach-ixp4xx/dsmg600-setup.c 2007-05-07 11:31:15.000000000 -0700
+@@ -15,6 +15,7 @@
+ #include <linux/serial.h>
+ #include <linux/serial_8250.h>
+
++#include <asm/setup.h>
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
+@@ -142,6 +143,36 @@
+ .init = dsmg600_timer_init,
+ };
+
++static char dsmg600_rtc_probe[] __initdata = "rtc-pcf8563.probe=0,0x51 ";
++
++static void __init dsmg600_fixup(struct machine_desc *desc,
++ struct tag *tags, char **cmdline, struct meminfo *mi)
++{
++ struct tag *t = tags;
++ char *p = *cmdline;
++
++ /* Find the end of the tags table, taking note of any cmdline tag. */
++ for (; t->hdr.size; t = tag_next(t)) {
++ if (t->hdr.tag == ATAG_CMDLINE) {
++ p = t->u.cmdline.cmdline;
++ }
++ }
++
++ /* Overwrite the end of the table with a new cmdline tag. */
++ t->hdr.tag = ATAG_CMDLINE;
++ t->hdr.size =
++ (sizeof (struct tag_header) +
++ strlen(dsmg600_rtc_probe) + strlen(p) + 1 + 4) >> 2;
++ strlcpy(t->u.cmdline.cmdline, dsmg600_rtc_probe, COMMAND_LINE_SIZE);
++ strlcpy(t->u.cmdline.cmdline + strlen(dsmg600_rtc_probe), p,
++ COMMAND_LINE_SIZE - strlen(dsmg600_rtc_probe));
++
++ /* Terminate the table. */
++ t = tag_next(t);
++ t->hdr.tag = ATAG_NONE;
++ t->hdr.size = 0;
++}
++
+ static void __init dsmg600_init(void)
+ {
+ ixp4xx_sys_init();
+@@ -174,6 +205,7 @@
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
++ .fixup = dsmg600_fixup,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &dsmg600_timer,
diff --git a/target/linux/ixp4xx/patches/200-gateway_7001.patch b/target/linux/ixp4xx/patches/200-gateway_7001.patch
new file mode 100644
index 0000000000..80cf000796
--- /dev/null
+++ b/target/linux/ixp4xx/patches/200-gateway_7001.patch
@@ -0,0 +1,250 @@
+diff -Nur linux-2.6.19.2/arch/arm/boot/compressed/head-xscale.S linux-2.6.19.2-owrt/arch/arm/boot/compressed/head-xscale.S
+--- linux-2.6.19.2/arch/arm/boot/compressed/head-xscale.S 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-owrt/arch/arm/boot/compressed/head-xscale.S 2007-04-02 15:39:28.000000000 +0200
+@@ -46,6 +46,11 @@
+ orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
+ #endif
+
++#ifdef CONFIG_MACH_GATEWAY7001
++ mov r7, #(MACH_TYPE_GATEWAY7001 & 0xff)
++ orr r7, r7, #(MACH_TYPE_GATEWAY7001 & 0xff00)
++#endif
++
+ #ifdef CONFIG_ARCH_IXP2000
+ mov r1, #-1
+ mov r0, #0xd6000000
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-pci.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c 2007-04-02 15:39:28.000000000 +0200
+@@ -0,0 +1,68 @@
++/*
++ * arch/arch/mach-ixp4xx/gateway7001-pci.c
++ *
++ * PCI setup routines for Gateway 7001
++ *
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ * Copyright (C) 2002 Jungo Software Technologies.
++ * Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++
++#include <asm/mach/pci.h>
++
++extern void ixp4xx_pci_preinit(void);
++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
++
++void __init gateway7001_pci_preinit(void)
++{
++ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
++ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
++
++ ixp4xx_pci_preinit();
++}
++
++static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ if (slot == 1)
++ return IRQ_IXP4XX_GPIO11;
++ else if (slot == 2)
++ return IRQ_IXP4XX_GPIO10;
++ else return -1;
++}
++
++struct hw_pci gateway7001_pci __initdata = {
++ .nr_controllers = 1,
++ .preinit = gateway7001_pci_preinit,
++ .swizzle = pci_std_swizzle,
++ .setup = ixp4xx_setup,
++ .scan = ixp4xx_scan_bus,
++ .map_irq = gateway7001_map_irq,
++};
++
++int __init gateway7001_pci_init(void)
++{
++ if (machine_is_gateway7001())
++ pci_common_init(&gateway7001_pci);
++ return 0;
++}
++
++subsys_initcall(gateway7001_pci_init);
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c 2007-04-02 15:49:28.000000000 +0200
+@@ -0,0 +1,108 @@
++/*
++ * arch/arm/mach-ixp4xx/gateway7001-setup.c
++ *
++ * Board setup for the Gateway 7001 board
++ *
++ * Copyright (C) 2006 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ * Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data gateway7001_flash_data = {
++ .map_name = "cfi_probe",
++ .width = 2,
++};
++
++static struct resource gateway7001_flash_resource = {
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device gateway7001_flash = {
++ .name = "IXP4XX-Flash",
++ .id = 0,
++ .dev = {
++ .platform_data = &gateway7001_flash_data,
++ },
++ .num_resources = 1,
++ .resource = &gateway7001_flash_resource,
++};
++
++static struct resource gateway7001_uart_resource = {
++ .start = IXP4XX_UART2_BASE_PHYS,
++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port gateway7001_uart_data[] = {
++ {
++ .mapbase = IXP4XX_UART2_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART2,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ { },
++};
++
++static struct platform_device gateway7001_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev = {
++ .platform_data = gateway7001_uart_data,
++ },
++ .num_resources = 1,
++ .resource = &gateway7001_uart_resource,
++};
++
++static struct platform_device *gateway7001_devices[] __initdata = {
++ &gateway7001_flash,
++ &gateway7001_uart
++};
++
++static void __init gateway7001_init(void)
++{
++ ixp4xx_sys_init();
++
++ gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++ gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++ platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices));
++}
++
++#ifdef CONFIG_MACH_GATEWAY7001
++MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
++ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq,
++ .timer = &ixp4xx_timer,
++ .boot_params = 0x0100,
++ .init_machine = gateway7001_init,
++MACHINE_END
++#endif
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-04-02 15:39:28.000000000 +0200
+@@ -33,6 +33,14 @@
+ Engineering Coyote Gateway Reference Platform. For more
+ information on this platform, see <file:Documentation/arm/IXP4xx>.
+
++config MACH_GATEWAY7001
++ bool "Gateway 7001"
++ select PCI
++ help
++ Say 'Y' here if you want your kernel to support Gateway's
++ 7001 Access Point. For more information on this platform,
++ see http://openwrt.org
++
+ config ARCH_IXDP425
+ bool "IXDP425"
+ help
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile 2007-04-02 15:49:49.000000000 +0200
+@@ -11,6 +11,7 @@
+ obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
+ obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
+ obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
++obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
+
+ obj-y += common.o
+
+@@ -20,5 +21,6 @@
+ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
+ obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
+ obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
++obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
+
+ obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
+diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
+--- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-02 15:42:04.000000000 +0200
+@@ -38,9 +38,9 @@
+ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+ {
+ /*
+- * Coyote and gtwx5715 only have UART2 connected
++ * Some boards are using UART2 as console
+ */
+- if (machine_is_adi_coyote() || machine_is_gtwx5715())
++ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001())
+ uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ else
+ uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches/210-gateway_7001_setup_mac.patch b/target/linux/ixp4xx/patches/210-gateway_7001_setup_mac.patch
new file mode 100644
index 0000000000..8b3f4b92c5
--- /dev/null
+++ b/target/linux/ixp4xx/patches/210-gateway_7001_setup_mac.patch
@@ -0,0 +1,62 @@
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-setup.c 2007-04-02 15:56:39.000000000 +0200
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c 2007-04-02 15:57:38.000000000 +0200
+@@ -76,9 +76,57 @@
+ .resource = &gateway7001_uart_resource,
+ };
+
++static struct resource res_mac0 = {
++ .start = IXP4XX_EthB_BASE_PHYS,
++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource res_mac1 = {
++ .start = IXP4XX_EthC_BASE_PHYS,
++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct mac_plat_info plat_mac0 = {
++ .npe_id = 1,
++ .phy_id = 1,
++ .eth_id = 0,
++ .rxq_id = 27,
++ .txq_id = 24,
++ .rxdoneq_id = 4,
++};
++
++static struct mac_plat_info plat_mac1 = {
++ .npe_id = 2,
++ .phy_id = 2,
++ .eth_id = 1,
++ .rxq_id = 28,
++ .txq_id = 25,
++ .rxdoneq_id = 5,
++};
++
++static struct platform_device mac0 = {
++ .name = "ixp4xx_mac",
++ .id = 0,
++ .dev.platform_data = &plat_mac0,
++ .num_resources = 1,
++ .resource = &res_mac0,
++};
++
++static struct platform_device mac1 = {
++ .name = "ixp4xx_mac",
++ .id = 1,
++ .dev.platform_data = &plat_mac1,
++ .num_resources = 1,
++ .resource = &res_mac1,
++};
++
+ static struct platform_device *gateway7001_devices[] __initdata = {
+ &gateway7001_flash,
+- &gateway7001_uart
++ &gateway7001_uart,
++ &mac0,
++ &mac1,
+ };
+
+ static void __init gateway7001_init(void)
diff --git a/target/linux/ixp4xx/patches/212-gateway_7001_mtd_microcode.patch b/target/linux/ixp4xx/patches/212-gateway_7001_mtd_microcode.patch
new file mode 100644
index 0000000000..c15c5f66a8
--- /dev/null
+++ b/target/linux/ixp4xx/patches/212-gateway_7001_mtd_microcode.patch
@@ -0,0 +1,67 @@
+--- linux-2.6.21.5/arch/arm/mach-ixp4xx/gateway7001-setup.c.orig 2007-06-19 18:03:37.202848276 +0100
++++ linux-2.6.21.5/arch/arm/mach-ixp4xx/gateway7001-setup.c 2007-06-19 18:09:04.152969985 +0100
+@@ -16,6 +16,7 @@
+ #include <linux/device.h>
+ #include <linux/serial.h>
+ #include <linux/tty.h>
++#include <linux/mtd/mtd.h>
+ #include <linux/serial_8250.h>
+ #include <linux/slab.h>
+
+@@ -122,11 +123,48 @@
+ .resource = &res_mac1,
+ };
+
++struct npe_ucode_platform_data gateway7001_npe_ucode_data = {
++ .mtd_partition = "microcode",
++};
++
++static struct platform_device gateway7001_npe_ucode = {
++ .name = "ixp4xx_npe_ucode",
++ .id = 0,
++ .dev.platform_data = &gateway7001_npe_ucode_data,
++};
++
+ static struct platform_device *gateway7001_devices[] __initdata = {
+ &gateway7001_flash,
+ &gateway7001_uart,
+ &mac0,
+ &mac1,
++ &gateway7001_npe_ucode,
++};
++
++static void gateway7001_flash_add(struct mtd_info *mtd)
++{
++ if (strcmp(mtd->name, "RedBoot config") == 0) {
++ size_t retlen;
++ u_char mac0[6], mac1[6];
++ if (mtd->read(mtd, 0x0422, 6, &retlen, mac0) == 0 && retlen == 6) {
++ printk(KERN_INFO "gateway 7001 mac0: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
++ mac0[0], mac0[1], mac0[2], mac0[3], mac0[4], mac0[5]);
++ memcpy(plat_mac0.hwaddr, mac0, 6);
++ }
++ if (mtd->read(mtd, 0x043B, 6, &retlen, mac1) == 0 && retlen == 6) {
++ printk(KERN_INFO "gateway 7001 mac1: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
++ mac1[0], mac1[1], mac1[2], mac1[3], mac1[4], mac1[5]);
++ memcpy(plat_mac1.hwaddr, mac1, 6);
++ }
++ }
++}
++
++static void gateway7001_flash_remove(struct mtd_info *mtd) {
++}
++
++static struct mtd_notifier gateway7001_flash_notifier = {
++ .add = gateway7001_flash_add,
++ .remove = gateway7001_flash_remove,
+ };
+
+ static void __init gateway7001_init(void)
+@@ -140,6 +178,7 @@
+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+ platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices));
++ register_mtd_user(&gateway7001_flash_notifier);
+ }
+
+ #ifdef CONFIG_MACH_GATEWAY7001
diff --git a/target/linux/ixp4xx/patches/300-wg302v2.patch b/target/linux/ixp4xx/patches/300-wg302v2.patch
new file mode 100644
index 0000000000..8dc1d72d9e
--- /dev/null
+++ b/target/linux/ixp4xx/patches/300-wg302v2.patch
@@ -0,0 +1,231 @@
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-04-02 16:09:06.000000000 +0200
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-04-02 16:01:25.000000000 +0200
+@@ -41,6 +41,14 @@
+ 7001 Access Point. For more information on this platform,
+ see http://openwrt.org
+
++config MACH_WG302V2
++ bool "Netgear WG302 v2 / WAG302 v2"
++ select PCI
++ help
++ Say 'Y' here if you want your kernel to support Netgear's
++ WG302 v2 or WAG302 v2 Access Points. For more information
++ on this platform, see http://openwrt.org
++
+ config ARCH_IXDP425
+ bool "IXDP425"
+ help
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile 2007-04-02 16:09:06.000000000 +0200
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile 2007-04-02 16:09:25.000000000 +0200
+@@ -12,6 +12,7 @@
+ obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
+ obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
+ obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
++obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
+
+ obj-y += common.o
+
+@@ -22,5 +23,6 @@
+ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
+ obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
+ obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
++obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
+
+ obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-pci.c
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-pci.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-pci.c 2007-04-02 16:00:12.000000000 +0200
+@@ -0,0 +1,68 @@
++/*
++ * arch/arch/mach-ixp4xx/wg302v2-pci.c
++ *
++ * PCI setup routines for the Netgear WG302 v2 and WAG302 v2
++ *
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ * Copyright (C) 2002 Jungo Software Technologies.
++ * Copyright (C) 2003 MontaVista Software, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++
++#include <asm/mach/pci.h>
++
++extern void ixp4xx_pci_preinit(void);
++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
++
++void __init wg302v2_pci_preinit(void)
++{
++ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
++ set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
++
++ ixp4xx_pci_preinit();
++}
++
++static int __init wg302v2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ if (slot == 1)
++ return IRQ_IXP4XX_GPIO8;
++ else if (slot == 2)
++ return IRQ_IXP4XX_GPIO9;
++ else return -1;
++}
++
++struct hw_pci wg302v2_pci __initdata = {
++ .nr_controllers = 1,
++ .preinit = wg302v2_pci_preinit,
++ .swizzle = pci_std_swizzle,
++ .setup = ixp4xx_setup,
++ .scan = ixp4xx_scan_bus,
++ .map_irq = wg302v2_map_irq,
++};
++
++int __init wg302v2_pci_init(void)
++{
++ if (machine_is_wg302v2())
++ pci_common_init(&wg302v2_pci);
++ return 0;
++}
++
++subsys_initcall(wg302v2_pci_init);
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c 2007-04-02 16:08:57.000000000 +0200
+@@ -0,0 +1,107 @@
++/*
++ * arch/arm/mach-ixp4xx/wg302-setup.c
++ *
++ * Board setup for the Netgear WG302 v2 and WAG302 v2
++ *
++ * based on coyote-setup.c:
++ * Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data wg302v2_flash_data = {
++ .map_name = "cfi_probe",
++ .width = 2,
++};
++
++static struct resource wg302v2_flash_resource = {
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device wg302v2_flash = {
++ .name = "IXP4XX-Flash",
++ .id = 0,
++ .dev = {
++ .platform_data = &wg302v2_flash_data,
++ },
++ .num_resources = 1,
++ .resource = &wg302v2_flash_resource,
++};
++
++static struct resource wg302v2_uart_resource = {
++ .start = IXP4XX_UART2_BASE_PHYS,
++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port wg302v2_uart_data[] = {
++ {
++ .mapbase = IXP4XX_UART2_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART2,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ { },
++};
++
++static struct platform_device wg302v2_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev = {
++ .platform_data = wg302v2_uart_data,
++ },
++ .num_resources = 1,
++ .resource = &wg302v2_uart_resource,
++};
++
++static struct platform_device *wg302v2_devices[] __initdata = {
++ &wg302v2_flash,
++ &wg302v2_uart,
++};
++
++static void __init wg302v2_init(void)
++{
++ ixp4xx_sys_init();
++
++ wg302v2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++ wg302v2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++ platform_add_devices(wg302v2_devices, ARRAY_SIZE(wg302v2_devices));
++}
++
++#ifdef CONFIG_MACH_WG302V2
++MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
++ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq,
++ .timer = &ixp4xx_timer,
++ .boot_params = 0x0100,
++ .init_machine = wg302v2_init,
++MACHINE_END
++#endif
+diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
+--- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-02 16:09:06.000000000 +0200
++++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-02 16:02:04.000000000 +0200
+@@ -40,7 +40,7 @@
+ /*
+ * Some boards are using UART2 as console
+ */
+- if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001())
++ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2())
+ uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ else
+ uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches/310-wg302v2_setup_mac.patch b/target/linux/ixp4xx/patches/310-wg302v2_setup_mac.patch
new file mode 100644
index 0000000000..27616e15b3
--- /dev/null
+++ b/target/linux/ixp4xx/patches/310-wg302v2_setup_mac.patch
@@ -0,0 +1,37 @@
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c 2007-04-02 16:06:02.000000000 +0200
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c 2007-03-05 11:57:24.000000000 +0100
+@@ -75,9 +75,33 @@
+ .resource = &wg302v2_uart_resource,
+ };
+
++static struct resource res_mac0 = {
++ .start = IXP4XX_EthB_BASE_PHYS,
++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct mac_plat_info plat_mac0 = {
++ .npe_id = 1,
++ .phy_id = 8,
++ .eth_id = 0,
++ .rxq_id = 27,
++ .txq_id = 24,
++ .rxdoneq_id = 4,
++};
++
++static struct platform_device mac0 = {
++ .name = "ixp4xx_mac",
++ .id = 0,
++ .dev.platform_data = &plat_mac0,
++ .num_resources = 1,
++ .resource = &res_mac0,
++};
++
+ static struct platform_device *wg302v2_devices[] __initdata = {
+ &wg302v2_flash,
+ &wg302v2_uart,
++ &mac0,
+ };
+
+ static void __init wg302v2_init(void)
diff --git a/target/linux/ixp4xx/patches/400-pronghorn_metro.patch b/target/linux/ixp4xx/patches/400-pronghorn_metro.patch
new file mode 100644
index 0000000000..8b88e106e1
--- /dev/null
+++ b/target/linux/ixp4xx/patches/400-pronghorn_metro.patch
@@ -0,0 +1,251 @@
+diff -Nur linux-2.6.21.1/Documentation/arm/IXP4xx linux-2.6.21.1-owrt/Documentation/arm/IXP4xx
+--- linux-2.6.21.1/Documentation/arm/IXP4xx 2007-06-10 13:54:49.000000000 +0200
++++ linux-2.6.21.1-owrt/Documentation/arm/IXP4xx 2007-06-10 13:46:37.000000000 +0200
+@@ -111,6 +111,9 @@
+ the platform has two mini-PCI slots used for 802.11[bga] cards.
+ Finally, there is an IDE port hanging off the expansion bus.
+
++ADI Engineering Pronghorn Metro Platform
++http://www.adiengineering.com/php-bin/ecomm4/productDisplay.php?category_id=30&product_id=85
++
+ Gateworks Avila Network Platform
+ http://www.gateworks.com/avila_sbc.htm
+
+diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/Kconfig linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.21.1/arch/arm/mach-ixp4xx/Kconfig 2007-06-10 13:54:47.000000000 +0200
++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-06-10 13:46:37.000000000 +0200
+@@ -57,6 +57,14 @@
+ WG302 v2 or WAG302 v2 Access Points. For more information
+ on this platform, see http://openwrt.org
+
++config MACH_PRONGHORNMETRO
++ bool "Pronghorn Metro"
++ select PCI
++ help
++ Say 'Y' here if you want your kernel to support the ADI
++ Engineering Pronghorn Metro Platform. For more
++ information on this platform, see <file:Documentation/arm/IXP4xx>.
++
+ config ARCH_IXDP425
+ bool "IXDP425"
+ help
+diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/Makefile linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.21.1/arch/arm/mach-ixp4xx/Makefile 2007-06-10 13:54:47.000000000 +0200
++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/Makefile 2007-06-10 13:46:37.000000000 +0200
+@@ -14,6 +14,7 @@
+ obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
+ obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
+ obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
++obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
+
+ obj-y += common.o
+
+@@ -26,5 +27,6 @@
+ obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
+ obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
+ obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
++obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
+
+ obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
+diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-pci.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
+--- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-pci.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-pci.c 2007-06-10 13:50:08.000000000 +0200
+@@ -0,0 +1,74 @@
++/*
++ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
++ *
++ * PCI setup routines for ADI Engineering Pronghorn Metro
++ *
++ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ * Copyright (C) 2002 Jungo Software Technologies.
++ * Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++
++#include <asm/mach/pci.h>
++
++extern void ixp4xx_pci_preinit(void);
++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
++
++void __init pronghornmetro_pci_preinit(void)
++{
++ set_irq_type(IRQ_IXP4XX_GPIO4, IRQT_LOW);
++ set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
++ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
++ set_irq_type(IRQ_IXP4XX_GPIO1, IRQT_LOW);
++
++ ixp4xx_pci_preinit();
++}
++
++static int __init pronghornmetro_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ if (slot == 13)
++ return IRQ_IXP4XX_GPIO4;
++ else if (slot == 14)
++ return IRQ_IXP4XX_GPIO6;
++ else if (slot == 15)
++ return IRQ_IXP4XX_GPIO11;
++ else if (slot == 16)
++ return IRQ_IXP4XX_GPIO1;
++ else return -1;
++}
++
++struct hw_pci pronghornmetro_pci __initdata = {
++ .nr_controllers = 1,
++ .preinit = pronghornmetro_pci_preinit,
++ .swizzle = pci_std_swizzle,
++ .setup = ixp4xx_setup,
++ .scan = ixp4xx_scan_bus,
++ .map_irq = pronghornmetro_map_irq,
++};
++
++int __init pronghornmetro_pci_init(void)
++{
++ if (machine_is_pronghorn_metro())
++ pci_common_init(&pronghornmetro_pci);
++ return 0;
++}
++
++subsys_initcall(pronghornmetro_pci_init);
+diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+--- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 13:51:51.000000000 +0200
+@@ -0,0 +1,108 @@
++/*
++ * arch/arm/mach-ixp4xx/pronghornmetro-setup.c
++ *
++ * Board setup for the ADI Engineering Pronghorn Metro
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ * Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data pronghornmetro_flash_data = {
++ .map_name = "cfi_probe",
++ .width = 2,
++};
++
++static struct resource pronghornmetro_flash_resource = {
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device pronghornmetro_flash = {
++ .name = "IXP4XX-Flash",
++ .id = 0,
++ .dev = {
++ .platform_data = &pronghornmetro_flash_data,
++ },
++ .num_resources = 1,
++ .resource = &pronghornmetro_flash_resource,
++};
++
++static struct resource pronghornmetro_uart_resource = {
++ .start = IXP4XX_UART2_BASE_PHYS,
++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port pronghornmetro_uart_data[] = {
++ {
++ .mapbase = IXP4XX_UART2_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART2,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ { },
++};
++
++static struct platform_device pronghornmetro_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev = {
++ .platform_data = pronghornmetro_uart_data,
++ },
++ .num_resources = 1,
++ .resource = &pronghornmetro_uart_resource,
++};
++
++static struct platform_device *pronghornmetro_devices[] __initdata = {
++ &pronghornmetro_flash,
++ &pronghornmetro_uart,
++};
++
++static void __init pronghornmetro_init(void)
++{
++ ixp4xx_sys_init();
++
++ pronghornmetro_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++ pronghornmetro_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
++
++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++ platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices));
++}
++
++#ifdef CONFIG_MACH_PRONGHORNMETRO
++MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
++ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq,
++ .timer = &ixp4xx_timer,
++ .boot_params = 0x0100,
++ .init_machine = pronghornmetro_init,
++MACHINE_END
++#endif
+diff -Nur linux-2.6.21.1/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.21.1-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
+--- linux-2.6.21.1/include/asm-arm/arch-ixp4xx/uncompress.h 2007-06-10 13:54:52.000000000 +0200
++++ linux-2.6.21.1-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-06-10 13:49:37.000000000 +0200
+@@ -40,7 +40,7 @@
+ /*
+ * Some boards are using UART2 as console
+ */
+- if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2())
++ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn_metro())
+ uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ else
+ uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches/410-pronghorn_metro_setup_mac.patch b/target/linux/ixp4xx/patches/410-pronghorn_metro_setup_mac.patch
new file mode 100644
index 0000000000..54621d6c3e
--- /dev/null
+++ b/target/linux/ixp4xx/patches/410-pronghorn_metro_setup_mac.patch
@@ -0,0 +1,61 @@
+diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+--- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:05:47.000000000 +0200
++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:05:38.000000000 +0200
+@@ -76,9 +76,57 @@
+ .resource = &pronghornmetro_uart_resource,
+ };
+
++static struct resource res_mac0 = {
++ .start = IXP4XX_EthB_BASE_PHYS,
++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource res_mac1 = {
++ .start = IXP4XX_EthC_BASE_PHYS,
++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct mac_plat_info plat_mac0 = {
++ .npe_id = 1,
++ .phy_id = 0,
++ .eth_id = 0,
++ .rxq_id = 27,
++ .txq_id = 24,
++ .rxdoneq_id = 4,
++};
++
++static struct mac_plat_info plat_mac1 = {
++ .npe_id = 2,
++ .phy_id = 1,
++ .eth_id = 1,
++ .rxq_id = 28,
++ .txq_id = 25,
++ .rxdoneq_id = 5,
++};
++
++static struct platform_device mac0 = {
++ .name = "ixp4xx_mac",
++ .id = 0,
++ .dev.platform_data = &plat_mac0,
++ .num_resources = 1,
++ .resource = &res_mac0,
++};
++
++static struct platform_device mac1 = {
++ .name = "ixp4xx_mac",
++ .id = 1,
++ .dev.platform_data = &plat_mac1,
++ .num_resources = 1,
++ .resource = &res_mac1,
++};
++
+ static struct platform_device *pronghornmetro_devices[] __initdata = {
+ &pronghornmetro_flash,
+ &pronghornmetro_uart,
++ &mac0,
++ &mac1,
+ };
+
+ static void __init pronghornmetro_init(void)
diff --git a/target/linux/ixp4xx/patches/420-pronghorn_metro_mtd_microcode.patch b/target/linux/ixp4xx/patches/420-pronghorn_metro_mtd_microcode.patch
new file mode 100644
index 0000000000..0c304c78ff
--- /dev/null
+++ b/target/linux/ixp4xx/patches/420-pronghorn_metro_mtd_microcode.patch
@@ -0,0 +1,55 @@
+diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+--- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:10:24.000000000 +0200
++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:10:15.000000000 +0200
+@@ -17,6 +17,7 @@
+ #include <linux/serial.h>
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
++#include <linux/mtd/mtd.h>
+ #include <linux/slab.h>
+
+ #include <asm/types.h>
+@@ -122,11 +123,34 @@
+ .resource = &res_mac1,
+ };
+
++struct npe_ucode_platform_data pronghornmetro_npe_ucode_data = {
++ .mtd_partition = "RedBoot",
++};
++
++static struct platform_device pronghornmetro_npe_ucode = {
++ .name = "ixp4xx_npe_ucode",
++ .id = 0,
++ .dev.platform_data = &pronghornmetro_npe_ucode_data,
++};
++
+ static struct platform_device *pronghornmetro_devices[] __initdata = {
+ &pronghornmetro_flash,
+ &pronghornmetro_uart,
+ &mac0,
+ &mac1,
++ &pronghornmetro_npe_ucode,
++};
++
++static void pronghornmetro_flash_add(struct mtd_info *mtd)
++{
++}
++
++static void pronghornmetro_flash_remove(struct mtd_info *mtd) {
++}
++
++static struct mtd_notifier pronghornmetro_flash_notifier = {
++ .add = pronghornmetro_flash_add,
++ .remove = pronghornmetro_flash_remove,
+ };
+
+ static void __init pronghornmetro_init(void)
+@@ -140,6 +164,8 @@
+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+ platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices));
++
++ register_mtd_user(&pronghornmetro_flash_notifier);
+ }
+
+ #ifdef CONFIG_MACH_PRONGHORNMETRO
diff --git a/target/linux/ixp4xx/patches/430-pronghorn_metro_cf.patch b/target/linux/ixp4xx/patches/430-pronghorn_metro_cf.patch
new file mode 100644
index 0000000000..d2982bc954
--- /dev/null
+++ b/target/linux/ixp4xx/patches/430-pronghorn_metro_cf.patch
@@ -0,0 +1,57 @@
+diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+--- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:31:27.000000000 +0200
++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:36:23.000000000 +0200
+@@ -77,6 +77,35 @@
+ .resource = &pronghornmetro_uart_resource,
+ };
+
++static struct resource pronghornmetro_pata_resources[] = {
++ {
++ .flags = IORESOURCE_MEM
++ },
++ {
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "intrq",
++ .start = IRQ_IXP4XX_GPIO0,
++ .end = IRQ_IXP4XX_GPIO0,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct ixp4xx_pata_data pronghornmetro_pata_data = {
++ .cs0_bits = 0xbfff0043,
++ .cs1_bits = 0xbfff0043,
++};
++
++static struct platform_device pronghornmetro_pata = {
++ .name = "pata_ixp4xx_cf",
++ .id = 0,
++ .dev.platform_data = &pronghornmetro_pata_data,
++ .num_resources = ARRAY_SIZE(pronghornmetro_pata_resources),
++ .resource = pronghornmetro_pata_resources,
++};
++
++
+ static struct resource res_mac0 = {
+ .start = IXP4XX_EthB_BASE_PHYS,
+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
+@@ -165,6 +194,17 @@
+
+ platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices));
+
++ pronghornmetro_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
++ pronghornmetro_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
++
++ pronghornmetro_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
++ pronghornmetro_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
++
++ pronghornmetro_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
++ pronghornmetro_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
++
++ platform_device_register(&pronghornmetro_pata);
++
+ register_mtd_user(&pronghornmetro_flash_notifier);
+ }
+
diff --git a/target/linux/ixp4xx/patches/500-compex.patch b/target/linux/ixp4xx/patches/500-compex.patch
new file mode 100644
index 0000000000..854194b35f
--- /dev/null
+++ b/target/linux/ixp4xx/patches/500-compex.patch
@@ -0,0 +1,184 @@
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c 2007-04-10 01:56:21.000000000 +0200
+@@ -0,0 +1,120 @@
++/*
++ * arch/arm/mach-ixp4xx/compex-setup.c
++ *
++ * Ccompex WP18 / NP18A board-setup
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on ixdp425-setup.c:
++ * Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/hardware.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data compex_flash_data = {
++ .map_name = "cfi_probe",
++ .width = 2,
++};
++
++static struct resource compex_flash_resource = {
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device compex_flash = {
++ .name = "IXP4XX-Flash",
++ .id = 0,
++ .dev = {
++ .platform_data = &compex_flash_data,
++ },
++ .num_resources = 1,
++ .resource = &compex_flash_resource,
++};
++
++static struct resource compex_uart_resources[] = {
++ {
++ .start = IXP4XX_UART1_BASE_PHYS,
++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM
++ },
++ {
++ .start = IXP4XX_UART2_BASE_PHYS,
++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM
++ }
++};
++
++static struct plat_serial8250_port compex_uart_data[] = {
++ {
++ .mapbase = IXP4XX_UART1_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART1,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ {
++ .mapbase = IXP4XX_UART2_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART2,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ { },
++};
++
++static struct platform_device compex_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev.platform_data = compex_uart_data,
++ .num_resources = 2,
++ .resource = compex_uart_resources
++};
++
++static struct platform_device *compex_devices[] __initdata = {
++ &compex_flash,
++ &compex_uart
++};
++
++static void __init compex_init(void)
++{
++ ixp4xx_sys_init();
++
++ compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++ compex_flash_resource.end =
++ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
++
++ platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices));
++}
++
++#ifdef CONFIG_MACH_COMPEX
++MACHINE_START(COMPEX, "Compex WP18 / NP18A")
++ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq,
++ .timer = &ixp4xx_timer,
++ .boot_params = 0x0100,
++ .init_machine = compex_init,
++MACHINE_END
++#endif
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/ixdp425-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/ixdp425-pci.c 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c 2007-04-10 00:22:16.000000000 +0200
+@@ -66,7 +66,7 @@
+ int __init ixdp425_pci_init(void)
+ {
+ if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
+- machine_is_ixdp465())
++ machine_is_ixdp465() || machine_is_compex())
+ pci_common_init(&ixdp425_pci);
+ return 0;
+ }
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-04-10 00:33:31.000000000 +0200
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-04-10 00:48:37.000000000 +0200
+@@ -57,6 +57,14 @@
+ Engineering Pronghorn Metro Platform. For more
+ information on this platform, see <file:Documentation/arm/IXP4xx>.
+
++config MACH_COMPEX
++ bool "Compex WP18 / NP18A"
++ select PCI
++ help
++ Say 'Y' here if you want your kernel to support Compex'
++ WP18 or NP18A boards. For more information on this
++ platform, see http://openwrt.org
++
+ config ARCH_IXDP425
+ bool "IXDP425"
+ help
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile 2007-04-10 00:33:39.000000000 +0200
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile 2007-04-09 20:23:06.000000000 +0200
+@@ -14,6 +14,7 @@
+ obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
+ obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
++obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
+
+ obj-y += common.o
+
+@@ -26,5 +27,6 @@
+ obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
+ obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
+ obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
++obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
+
+ obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
+diff -Nur linux-2.6.19.2/arch/arm/tools/mach-types linux-2.6.19.2-owrt/arch/arm/tools/mach-types
+--- linux-2.6.19.2/arch/arm/tools/mach-types 2007-04-10 01:27:55.000000000 +0200
++++ linux-2.6.19.2-owrt/arch/arm/tools/mach-types 2007-04-09 20:22:33.000000000 +0200
+@@ -1278,7 +1278,7 @@
+ smdk6400 MACH_SMDK6400 SMDK6400 1270
+ nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271
+ greenphone MACH_GREENPHONE GREENPHONE 1272
+-compex42x MACH_COMPEXWP18 COMPEXWP18 1273
++compex MACH_COMPEX COMPEX 1273
+ xmate MACH_XMATE XMATE 1274
+ energizer MACH_ENERGIZER ENERGIZER 1275
+ ime1 MACH_IME1 IME1 1276
diff --git a/target/linux/ixp4xx/patches/510-compex_setup_mac.patch b/target/linux/ixp4xx/patches/510-compex_setup_mac.patch
new file mode 100644
index 0000000000..ed85df0818
--- /dev/null
+++ b/target/linux/ixp4xx/patches/510-compex_setup_mac.patch
@@ -0,0 +1,62 @@
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c 2007-04-09 20:30:37.000000000 +0200
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c 2007-04-09 20:36:23.000000000 +0200
+@@ -90,9 +90,57 @@
+ .resource = compex_uart_resources
+ };
+
++static struct resource res_mac0 = {
++ .start = IXP4XX_EthB_BASE_PHYS,
++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource res_mac1 = {
++ .start = IXP4XX_EthC_BASE_PHYS,
++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct mac_plat_info plat_mac0 = {
++ .npe_id = 1,
++ .phy_id = -1,
++ .eth_id = 0,
++ .rxq_id = 27,
++ .txq_id = 24,
++ .rxdoneq_id = 4,
++};
++
++static struct mac_plat_info plat_mac1 = {
++ .npe_id = 2,
++ .phy_id = 3,
++ .eth_id = 1,
++ .rxq_id = 28,
++ .txq_id = 25,
++ .rxdoneq_id = 5,
++};
++
++static struct platform_device mac0 = {
++ .name = "ixp4xx_mac",
++ .id = 0,
++ .dev.platform_data = &plat_mac0,
++ .num_resources = 1,
++ .resource = &res_mac0,
++};
++
++static struct platform_device mac1 = {
++ .name = "ixp4xx_mac",
++ .id = 1,
++ .dev.platform_data = &plat_mac1,
++ .num_resources = 1,
++ .resource = &res_mac1,
++};
++
+ static struct platform_device *compex_devices[] __initdata = {
+ &compex_flash,
+- &compex_uart
++ &compex_uart,
++ &mac0,
++ &mac1,
+ };
+
+ static void __init compex_init(void)
diff --git a/target/linux/ixp4xx/patches/520-compex_mtd_microcode.patch b/target/linux/ixp4xx/patches/520-compex_mtd_microcode.patch
new file mode 100644
index 0000000000..90842239c0
--- /dev/null
+++ b/target/linux/ixp4xx/patches/520-compex_mtd_microcode.patch
@@ -0,0 +1,55 @@
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c 2007-04-09 20:51:57.000000000 +0200
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c 2007-04-09 21:48:22.000000000 +0200
+@@ -17,6 +17,7 @@
+ #include <linux/serial.h>
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
++#include <linux/mtd/mtd.h>
+ #include <linux/slab.h>
+
+ #include <asm/types.h>
+@@ -136,11 +137,34 @@
+ .resource = &res_mac1,
+ };
+
++struct npe_ucode_platform_data compex_npe_ucode_data = {
++ .mtd_partition = "RedBoot",
++};
++
++static struct platform_device compex_npe_ucode = {
++ .name = "ixp4xx_npe_ucode",
++ .id = 0,
++ .dev.platform_data = &compex_npe_ucode_data,
++};
++
+ static struct platform_device *compex_devices[] __initdata = {
+ &compex_flash,
+ &compex_uart,
+ &mac0,
+ &mac1,
++ &compex_npe_ucode,
++};
++
++static void compex_flash_add(struct mtd_info *mtd)
++{
++}
++
++static void compex_flash_remove(struct mtd_info *mtd) {
++}
++
++static struct mtd_notifier compex_flash_notifier = {
++ .add = compex_flash_add,
++ .remove = compex_flash_remove,
+ };
+
+ static void __init compex_init(void)
+@@ -152,6 +176,8 @@
+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+ platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices));
++
++ register_mtd_user(&compex_flash_notifier);
+ }
+
+ #ifdef CONFIG_ARCH_COMPEX
diff --git a/target/linux/ixp4xx/patches/600-wrt300nv2.patch b/target/linux/ixp4xx/patches/600-wrt300nv2.patch
new file mode 100644
index 0000000000..9697e5d5f2
--- /dev/null
+++ b/target/linux/ixp4xx/patches/600-wrt300nv2.patch
@@ -0,0 +1,229 @@
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-05-03 23:17:47.000000000 +0200
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-04-24 14:25:02.000000000 +0200
+@@ -65,6 +65,14 @@
+ WP18 or NP18A boards. For more information on this
+ platform, see http://openwrt.org
+
++config MACH_WRT300NV2
++ bool "Linksys WRT300N v2"
++ select PCI
++ help
++ Say 'Y' here if you want your kernel to support Linksys'
++ WRT300N v2 router. For more information on this
++ platform, see http://openwrt.org
++
+ config ARCH_IXDP425
+ bool "IXDP425"
+ help
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile 2007-05-03 23:17:47.000000000 +0200
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile 2007-04-24 14:25:02.000000000 +0200
+@@ -15,6 +15,7 @@
+ obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
+ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
++obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
+
+ obj-y += common.o
+
+@@ -28,5 +29,6 @@
+ obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
+ obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
+ obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
++obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
+
+ obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-pci.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-pci.c 2007-05-10 10:40:54.000000000 +0200
+@@ -0,0 +1,65 @@
++/*
++ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
++ *
++ * PCI setup routines for Linksys WRT300N v2
++ *
++ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ * Copyright (C) 2002 Jungo Software Technologies.
++ * Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++
++#include <asm/mach/pci.h>
++
++extern void ixp4xx_pci_preinit(void);
++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
++
++void __init wrt300nv2_pci_preinit(void)
++{
++ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
++
++ ixp4xx_pci_preinit();
++}
++
++static int __init wrt300nv2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ if (slot == 1)
++ return IRQ_IXP4XX_GPIO8;
++ else return -1;
++}
++
++struct hw_pci wrt300nv2_pci __initdata = {
++ .nr_controllers = 1,
++ .preinit = wrt300nv2_pci_preinit,
++ .swizzle = pci_std_swizzle,
++ .setup = ixp4xx_setup,
++ .scan = ixp4xx_scan_bus,
++ .map_irq = wrt300nv2_map_irq,
++};
++
++int __init wrt300nv2_pci_init(void)
++{
++ if (machine_is_wrt300nv2())
++ pci_common_init(&wrt300nv2_pci);
++ return 0;
++}
++
++subsys_initcall(wrt300nv2_pci_init);
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2007-05-03 23:16:53.000000000 +0200
+@@ -0,0 +1,108 @@
++/*
++ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
++ *
++ * Board setup for the Linksys WRT300N v2
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ * Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data wrt300nv2_flash_data = {
++ .map_name = "cfi_probe",
++ .width = 2,
++};
++
++static struct resource wrt300nv2_flash_resource = {
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device wrt300nv2_flash = {
++ .name = "IXP4XX-Flash",
++ .id = 0,
++ .dev = {
++ .platform_data = &wrt300nv2_flash_data,
++ },
++ .num_resources = 1,
++ .resource = &wrt300nv2_flash_resource,
++};
++
++static struct resource wrt300nv2_uart_resource = {
++ .start = IXP4XX_UART2_BASE_PHYS,
++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port wrt300nv2_uart_data[] = {
++ {
++ .mapbase = IXP4XX_UART2_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART2,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ { },
++};
++
++static struct platform_device wrt300nv2_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev = {
++ .platform_data = wrt300nv2_uart_data,
++ },
++ .num_resources = 1,
++ .resource = &wrt300nv2_uart_resource,
++};
++
++static struct platform_device *wrt300nv2_devices[] __initdata = {
++ &wrt300nv2_flash,
++ &wrt300nv2_uart
++};
++
++static void __init wrt300nv2_init(void)
++{
++ ixp4xx_sys_init();
++
++ wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++ wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++ platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
++}
++
++#ifdef CONFIG_MACH_WRT300NV2
++MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
++ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq,
++ .timer = &ixp4xx_timer,
++ .boot_params = 0x0100,
++ .init_machine = wrt300nv2_init,
++MACHINE_END
++#endif
+diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
+--- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h 2007-05-03 23:17:48.000000000 +0200
++++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-24 14:25:02.000000000 +0200
+@@ -40,7 +40,7 @@
+ /*
+ * Some boards are using UART2 as console
+ */
+- if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn_metro())
++ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn_metro() || machine_is_wrt300nv2())
+ uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ else
+ uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches/610-wrt300nv2_setup_mac.patch b/target/linux/ixp4xx/patches/610-wrt300nv2_setup_mac.patch
new file mode 100644
index 0000000000..145ad76ef7
--- /dev/null
+++ b/target/linux/ixp4xx/patches/610-wrt300nv2_setup_mac.patch
@@ -0,0 +1,62 @@
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2007-04-24 14:25:02.000000000 +0200
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2007-04-24 14:31:09.000000000 +0200
+@@ -76,9 +76,57 @@
+ .resource = &wrt300nv2_uart_resource,
+ };
+
++static struct resource res_mac0 = {
++ .start = IXP4XX_EthB_BASE_PHYS,
++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource res_mac1 = {
++ .start = IXP4XX_EthC_BASE_PHYS,
++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct mac_plat_info plat_mac0 = {
++ .npe_id = 1,
++ .phy_id = -1,
++ .eth_id = 0,
++ .rxq_id = 27,
++ .txq_id = 24,
++ .rxdoneq_id = 4,
++};
++
++static struct mac_plat_info plat_mac1 = {
++ .npe_id = 2,
++ .phy_id = 1,
++ .eth_id = 1,
++ .rxq_id = 28,
++ .txq_id = 25,
++ .rxdoneq_id = 5,
++};
++
++static struct platform_device mac0 = {
++ .name = "ixp4xx_mac",
++ .id = 0,
++ .dev.platform_data = &plat_mac0,
++ .num_resources = 1,
++ .resource = &res_mac0,
++};
++
++static struct platform_device mac1 = {
++ .name = "ixp4xx_mac",
++ .id = 1,
++ .dev.platform_data = &plat_mac1,
++ .num_resources = 1,
++ .resource = &res_mac1,
++};
++
+ static struct platform_device *wrt300nv2_devices[] __initdata = {
+ &wrt300nv2_flash,
+- &wrt300nv2_uart
++ &wrt300nv2_uart,
++ &mac0,
++ &mac1,
+ };
+
+ static void __init wrt300nv2_init(void)
diff --git a/target/linux/ixp4xx/patches/720-avila_setup_mac.patch b/target/linux/ixp4xx/patches/720-avila_setup_mac.patch
new file mode 100644
index 0000000000..3784852e31
--- /dev/null
+++ b/target/linux/ixp4xx/patches/720-avila_setup_mac.patch
@@ -0,0 +1,70 @@
+---
+ arch/arm/mach-ixp4xx/avila-setup.c | 50 ++++++++++++++++++++++++++++++++++++-
+ 1 file changed, 49 insertions(+), 1 deletion(-)
+
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/avila-setup.c
++++ linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -104,10 +104,60 @@ static struct platform_device avila_uart
+ .resource = avila_uart_resources
+ };
+
++/* MACs */
++static struct resource res_mac0 = {
++ .start = IXP4XX_EthB_BASE_PHYS,
++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource res_mac1 = {
++ .start = IXP4XX_EthC_BASE_PHYS,
++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct mac_plat_info plat_mac0 = {
++ .npe_id = 1,
++ .phy_id = 0,
++ .eth_id = 0,
++ .rxq_id = 27,
++ .txq_id = 24,
++ .rxdoneq_id = 4,
++};
++
++static struct mac_plat_info plat_mac1 = {
++ .npe_id = 2,
++ .phy_id = 1,
++ .eth_id = 1,
++ .rxq_id = 28,
++ .txq_id = 25,
++ .rxdoneq_id = 5,
++};
++
++static struct platform_device mac0 = {
++ .name = "ixp4xx_mac",
++ .id = 0,
++ .dev.platform_data = &plat_mac0,
++ .num_resources = 1,
++ .resource = &res_mac0,
++};
++
++static struct platform_device mac1 = {
++ .name = "ixp4xx_mac",
++ .id = 1,
++ .dev.platform_data = &plat_mac1,
++ .num_resources = 1,
++ .resource = &res_mac1,
++};
++
+ static struct platform_device *avila_devices[] __initdata = {
+ &avila_i2c_controller,
+ &avila_flash,
+- &avila_uart
++ &avila_uart,
++ &mac0,
++ &mac1,
++
+ };
+
+ static void __init avila_init(void)
diff --git a/target/linux/ixp4xx/patches/740-avila_loft_mac_platform.patch b/target/linux/ixp4xx/patches/740-avila_loft_mac_platform.patch
new file mode 100644
index 0000000000..952a05506e
--- /dev/null
+++ b/target/linux/ixp4xx/patches/740-avila_loft_mac_platform.patch
@@ -0,0 +1,50 @@
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/avila-setup.c 2007-01-23 03:12:36.000000000 -0800
++++ linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c 2007-01-23 03:12:47.000000000 -0800
+@@ -18,6 +18,10 @@
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
+ #include <linux/slab.h>
++#ifdef CONFIG_SENSORS_EEPROM
++#include <linux/i2c.h>
++#include <linux/eeprom.h>
++#endif
+
+ #include <asm/types.h>
+ #include <asm/setup.h>
+@@ -198,9 +202,34 @@
+ &avila_npe_ucode,
+ };
+
++#ifdef CONFIG_SENSORS_EEPROM
++static int loft_eeprom_do(struct notifier_block *self, unsigned long event, void *t)
++{
++ struct eeprom_data *data = t;
++
++ char macs[12];
++
++ /* The MACs are the first 12 bytes in the eeprom at address 0x51 */
++ if (event == EEPROM_REGISTER && data->client.addr == 0x51) {
++ data->attr->read(&data->client.dev.kobj, macs, 0, 12);
++ memcpy(&plat_mac0.hwaddr, macs, 6);
++ memcpy(&plat_mac1.hwaddr, macs + 6, 6);
++ }
++
++ return NOTIFY_DONE;
++}
++
++static struct notifier_block loft_eeprom_notifier = {
++ .notifier_call = loft_eeprom_do
++};
++#endif
++
+ static void __init avila_init(void)
+ {
+ ixp4xx_sys_init();
++#ifdef CONFIG_SENSORS_EEPROM
++ register_eeprom_notifier(&loft_eeprom_notifier);
++#endif
+
+ avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ avila_flash_resource.end =
diff --git a/target/linux/ixp4xx/patches/750-avila_mtd_microcode.patch b/target/linux/ixp4xx/patches/750-avila_mtd_microcode.patch
new file mode 100644
index 0000000000..0ecd3a5617
--- /dev/null
+++ b/target/linux/ixp4xx/patches/750-avila_mtd_microcode.patch
@@ -0,0 +1,28 @@
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/avila-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/avila-setup.c
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/avila-setup.c 2007-05-10 12:30:54.000000000 +0200
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/avila-setup.c 2007-05-10 12:33:08.000000000 +0200
+@@ -155,13 +155,23 @@
+ .resource = &res_mac1,
+ };
+
++struct npe_ucode_platform_data avila_npe_ucode_data = {
++ .mtd_partition = "RedBoot",
++};
++
++static struct platform_device avila_npe_ucode = {
++ .name = "ixp4xx_npe_ucode",
++ .id = 0,
++ .dev.platform_data = &avila_npe_ucode_data,
++};
++
+ static struct platform_device *avila_devices[] __initdata = {
+ &avila_i2c_controller,
+ &avila_flash,
+ &avila_uart,
+ &mac0,
+ &mac1,
+-
++ &avila_npe_ucode,
+ };
+
+ #ifdef CONFIG_SENSORS_EEPROM
diff --git a/target/linux/ixp4xx/patches/800-eeprom_new_notifier.patch b/target/linux/ixp4xx/patches/800-eeprom_new_notifier.patch
new file mode 100644
index 0000000000..79a097128c
--- /dev/null
+++ b/target/linux/ixp4xx/patches/800-eeprom_new_notifier.patch
@@ -0,0 +1,201 @@
+Add EEPROM notifiers
+
+These help board level code by allowing a callback when EEPROMs are
+loaded, this permits system level configuration to be loaded from the
+EEPROM. This is particularly useful when the ethernet MAC ids are
+stored in EEPROM and when the ethernet hardware is generic (so it
+has no board level knowledge), then the MACs can be loaded into
+the 'maclist' code and read out by the ethernet config.
+
+Signed-off-by: John Bowler <jbowler@acm.org>
+
+Index: linux-2.6.21-rc1-arm/drivers/i2c/chips/eeprom.c
+===================================================================
+--- linux-2.6.21-rc1-arm.orig/drivers/i2c/chips/eeprom.c 2007-02-21 02:24:14.000000000 -0800
++++ linux-2.6.21-rc1-arm/drivers/i2c/chips/eeprom.c 2007-02-21 02:25:01.000000000 -0800
+@@ -33,6 +33,8 @@
+ #include <linux/jiffies.h>
+ #include <linux/i2c.h>
+ #include <linux/mutex.h>
++#include <linux/notifier.h>
++#include <linux/eeprom.h>
+
+ /* Addresses to scan */
+ static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
+@@ -41,26 +43,7 @@
+ /* Insmod parameters */
+ I2C_CLIENT_INSMOD_1(eeprom);
+
+-
+-/* Size of EEPROM in bytes */
+-#define EEPROM_SIZE 256
+-
+-/* possible types of eeprom devices */
+-enum eeprom_nature {
+- UNKNOWN,
+- VAIO,
+-};
+-
+-/* Each client has this additional data */
+-struct eeprom_data {
+- struct i2c_client client;
+- struct mutex update_lock;
+- u8 valid; /* bitfield, bit!=0 if slice is valid */
+- unsigned long last_updated[8]; /* In jiffies, 8 slices */
+- u8 data[EEPROM_SIZE]; /* Register values */
+- enum eeprom_nature nature;
+-};
+-
++ATOMIC_NOTIFIER_HEAD(eeprom_chain);
+
+ static int eeprom_attach_adapter(struct i2c_adapter *adapter);
+ static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind);
+@@ -189,6 +172,7 @@
+ data->valid = 0;
+ mutex_init(&data->update_lock);
+ data->nature = UNKNOWN;
++ data->attr = &eeprom_attr;
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(new_client)))
+@@ -212,6 +196,9 @@
+ if (err)
+ goto exit_detach;
+
++ /* call the notifier chain */
++ atomic_notifier_call_chain(&eeprom_chain, EEPROM_REGISTER, data);
++
+ return 0;
+
+ exit_detach:
+@@ -237,6 +224,41 @@
+ return 0;
+ }
+
++/**
++ * register_eeprom_notifier - register a 'user' of EEPROM devices.
++ * @nb: pointer to notifier info structure
++ *
++ * Registers a callback function to be called upon detection
++ * of an EEPROM device. Detection invokes the 'add' callback
++ * with the kobj of the mutex and a bin_attribute which allows
++ * read from the EEPROM. The intention is that the notifier
++ * will be able to read system configuration from the notifier.
++ *
++ * Only EEPROMs detected *after* the addition of the notifier
++ * are notified. I.e. EEPROMs already known to the system
++ * will not be notified - add the notifier from board level
++ * code!
++ */
++int register_eeprom_notifier(struct notifier_block *nb)
++{
++ return atomic_notifier_chain_register(&eeprom_chain, nb);
++}
++
++/**
++ * unregister_eeprom_notifier - unregister a 'user' of EEPROM devices.
++ * @old: pointer to notifier info structure
++ *
++ * Removes a callback function from the list of 'users' to be
++ * notified upon detection of EEPROM devices.
++ */
++int unregister_eeprom_notifier(struct notifier_block *nb)
++{
++ return atomic_notifier_chain_unregister(&eeprom_chain, nb);
++}
++
++EXPORT_SYMBOL_GPL(register_eeprom_notifier);
++EXPORT_SYMBOL_GPL(unregister_eeprom_notifier);
++
+ static int __init eeprom_init(void)
+ {
+ return i2c_add_driver(&eeprom_driver);
+Index: linux-2.6.21-rc1-arm/include/linux/eeprom.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/include/linux/eeprom.h 2007-02-21 02:25:01.000000000 -0800
+@@ -0,0 +1,71 @@
++#ifndef _LINUX_EEPROM_H
++#define _LINUX_EEPROM_H
++/*
++ * $Id: 45-eeprom-new-notifier.patch,v 1.2 2006/03/27 11:10:19 azummo Exp $
++ *
++ * Copyright (C) 2006 John Bowler
++ */
++
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#ifndef __KERNEL__
++#error This is a kernel header
++#endif
++
++#include <linux/list.h>
++#include <linux/kobject.h>
++#include <linux/sysfs.h>
++
++/* Size of EEPROM in bytes */
++#define EEPROM_SIZE 256
++
++/* possible types of eeprom devices */
++enum eeprom_nature {
++ UNKNOWN,
++ VAIO,
++};
++
++/* Each client has this additional data */
++struct eeprom_data {
++ struct i2c_client client;
++ struct mutex update_lock;
++ u8 valid; /* bitfield, bit!=0 if slice is valid */
++ unsigned long last_updated[8]; /* In jiffies, 8 slices */
++ u8 data[EEPROM_SIZE]; /* Register values */
++ enum eeprom_nature nature;
++ struct bin_attribute *attr;
++};
++
++/*
++ * This is very basic.
++ *
++ * If an EEPROM is detected on the I2C bus (this only works for
++ * I2C EEPROMs) the notifier chain is called with
++ * both the I2C information and the kobject for the sysfs
++ * device which has been registers. It is then possible to
++ * read from the device via the bin_attribute::read method
++ * to extract configuration information.
++ *
++ * Register the notifier in the board level code, there is no
++ * need to unregister it but you can if you want (it will save
++ * a little bit or kernel memory to do so).
++ */
++
++extern int register_eeprom_notifier(struct notifier_block *nb);
++extern int unregister_eeprom_notifier(struct notifier_block *nb);
++
++#endif /* _LINUX_EEPROM_H */
+Index: linux-2.6.21-rc1-arm/include/linux/notifier.h
+===================================================================
+--- linux-2.6.21-rc1-arm.orig/include/linux/notifier.h 2007-02-21 02:24:14.000000000 -0800
++++ linux-2.6.21-rc1-arm/include/linux/notifier.h 2007-02-21 02:25:01.000000000 -0800
+@@ -187,5 +187,8 @@
+ #define CPU_DOWN_FAILED 0x0006 /* CPU (unsigned)v NOT going down */
+ #define CPU_DEAD 0x0007 /* CPU (unsigned)v dead */
+
++/* eeprom notifier chain */
++#define EEPROM_REGISTER 0x0001
++
+ #endif /* __KERNEL__ */
+ #endif /* _LINUX_NOTIFIER_H */
diff --git a/target/linux/ixp4xx/patches/900-no_loader_workaround.patch b/target/linux/ixp4xx/patches/900-no_loader_workaround.patch
new file mode 100644
index 0000000000..f84f15b09e
--- /dev/null
+++ b/target/linux/ixp4xx/patches/900-no_loader_workaround.patch
@@ -0,0 +1,19 @@
+diff -Nur linux-2.6.19/arch/arm/boot/compressed/head-xscale.S linux-2.6.19-owrt/arch/arm/boot/compressed/head-xscale.S
+--- linux-2.6.19/arch/arm/boot/compressed/head-xscale.S 2006-12-19 12:56:21.000000000 +0100
++++ linux-2.6.19-owrt/arch/arm/boot/compressed/head-xscale.S 2006-12-19 12:58:15.000000000 +0100
+@@ -41,6 +41,7 @@
+ mov r7, #MACH_TYPE_COTULLA_IDP
+ #endif
+
++/* let the arm-magic.sh script do the dirty work
+ #ifdef CONFIG_MACH_GTWX5715
+ mov r7, #(MACH_TYPE_GTWX5715 & 0xff)
+ orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
+@@ -50,6 +51,7 @@
+ mov r7, #(MACH_TYPE_GATEWAY7001 & 0xff)
+ orr r7, r7, #(MACH_TYPE_GATEWAY7001 & 0xff00)
+ #endif
++ */
+
+ #ifdef CONFIG_ARCH_IXP2000
+ mov r1, #-1
diff --git a/target/linux/ixp4xx/patches/996-fsg3_support.patch b/target/linux/ixp4xx/patches/996-fsg3_support.patch
new file mode 100644
index 0000000000..ecf5d750a5
--- /dev/null
+++ b/target/linux/ixp4xx/patches/996-fsg3_support.patch
@@ -0,0 +1,429 @@
+Index: linux-2.6.21.5-armeb/arch/arm/mach-ixp4xx/fsg-pci.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.5-armeb/arch/arm/mach-ixp4xx/fsg-pci.c
+@@ -0,0 +1,71 @@
++/*
++ * arch/arch/mach-ixp4xx/fsg-pci.c
++ *
++ * FSG board-level PCI initialization
++ *
++ * Author: Rod Whitby <rod@whitby.id.au>
++ * Maintainer: http://www.nslu2-linux.org/
++ *
++ * based on ixdp425-pci.c:
++ * Copyright (C) 2002 Intel Corporation.
++ * Copyright (C) 2003-2004 MontaVista Software, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach/pci.h>
++#include <asm/mach-types.h>
++
++void __init fsg_pci_preinit(void)
++{
++ set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
++ set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
++ set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
++
++ ixp4xx_pci_preinit();
++}
++
++static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ static int pci_irq_table[FSG_PCI_IRQ_LINES] = {
++ IRQ_FSG_PCI_INTC,
++ IRQ_FSG_PCI_INTB,
++ IRQ_FSG_PCI_INTA,
++ };
++
++ int irq = -1;
++ slot = slot - 11;
++
++ if (slot >= 1 && slot <= FSG_PCI_MAX_DEV &&
++ pin >= 1 && pin <= FSG_PCI_IRQ_LINES) {
++ irq = pci_irq_table[(slot - 1)];
++ }
++ printk("%s: Mapped slot %d pin %d to IRQ %d\n", __FUNCTION__,slot, pin, irq);
++
++ return irq;
++}
++
++struct hw_pci fsg_pci __initdata = {
++ .nr_controllers = 1,
++ .preinit = fsg_pci_preinit,
++ .swizzle = pci_std_swizzle,
++ .setup = ixp4xx_setup,
++ .scan = ixp4xx_scan_bus,
++ .map_irq = fsg_map_irq,
++};
++
++int __init fsg_pci_init(void)
++{
++ if (machine_is_fsg())
++ pci_common_init(&fsg_pci);
++ return 0;
++}
++
++subsys_initcall(fsg_pci_init);
+Index: linux-2.6.21.5-armeb/arch/arm/mach-ixp4xx/fsg-setup.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.5-armeb/arch/arm/mach-ixp4xx/fsg-setup.c
+@@ -0,0 +1,223 @@
++/*
++ * arch/arm/mach-ixp4xx/fsg-setup.c
++ *
++ * FSG board-setup
++ *
++ * based ixdp425-setup.c:
++ * Copyright (C) 2003-2004 MontaVista Software, Inc.
++ *
++ * Author: Rod Whitby <rod@whitby.id.au>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
++#include <linux/leds.h>
++#include <linux/mtd/mtd.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data fsg_flash_data = {
++ .map_name = "cfi_probe",
++ .width = 2,
++};
++
++static struct resource fsg_flash_resource = {
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device fsg_flash = {
++ .name = "IXP4XX-Flash",
++ .id = 0,
++ .dev.platform_data = &fsg_flash_data,
++ .num_resources = 1,
++ .resource = &fsg_flash_resource,
++};
++
++static struct ixp4xx_i2c_pins fsg_i2c_gpio_pins = {
++ .sda_pin = FSG_SDA_PIN,
++ .scl_pin = FSG_SCL_PIN,
++};
++
++static struct platform_device fsg_i2c_controller = {
++ .name = "IXP4XX-I2C",
++ .id = 0,
++ .dev.platform_data = &fsg_i2c_gpio_pins,
++ .num_resources = 0,
++};
++
++static struct resource fsg_uart_resources[] = {
++ {
++ .start = IXP4XX_UART1_BASE_PHYS,
++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = IXP4XX_UART2_BASE_PHYS,
++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct plat_serial8250_port fsg_uart_data[] = {
++ {
++ .mapbase = IXP4XX_UART1_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART1,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ {
++ .mapbase = IXP4XX_UART2_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART2,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ { }
++};
++
++static struct platform_device fsg_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev.platform_data = fsg_uart_data,
++ .num_resources = ARRAY_SIZE(fsg_uart_resources),
++ .resource = fsg_uart_resources,
++};
++
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct resource res_mac0 = {
++ .start = IXP4XX_EthB_BASE_PHYS,
++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource res_mac1 = {
++ .start = IXP4XX_EthC_BASE_PHYS,
++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct mac_plat_info plat_mac0 = {
++ .npe_id = 1,
++ .phy_id = 5,
++ .eth_id = 0,
++ .rxq_id = 27,
++ .txq_id = 24,
++ .rxdoneq_id = 4,
++};
++
++static struct mac_plat_info plat_mac1 = {
++ .npe_id = 2,
++ .phy_id = 4,
++ .eth_id = 1,
++ .rxq_id = 28,
++ .txq_id = 25,
++ .rxdoneq_id = 5,
++};
++
++static struct platform_device mac0 = {
++ .name = "ixp4xx_mac",
++ .id = 0,
++ .dev.platform_data = &plat_mac0,
++ .num_resources = 1,
++ .resource = &res_mac0,
++};
++
++static struct platform_device mac1 = {
++ .name = "ixp4xx_mac",
++ .id = 1,
++ .dev.platform_data = &plat_mac1,
++ .num_resources = 1,
++ .resource = &res_mac1,
++};
++
++struct npe_ucode_platform_data fsg_npe_ucode_data = {
++ .mtd_partition = "microcode",
++};
++
++static struct platform_device fsg_npe_ucode = {
++ .name = "ixp4xx_npe_ucode",
++ .id = 0,
++ .dev.platform_data = &fsg_npe_ucode_data,
++};
++
++static struct platform_device *fsg_devices[] __initdata = {
++ &fsg_i2c_controller,
++ &fsg_flash,
++ &mac0,
++ &mac1,
++ &fsg_npe_ucode,
++};
++
++static void fsg_flash_add(struct mtd_info *mtd)
++{
++ if (strcmp(mtd->name, "RedBoot config") == 0) {
++ size_t retlen;
++ u_char mac[6];
++
++ if (mtd->read(mtd, 0x0422, 6, &retlen, mac) == 0 && retlen == 6) {
++ printk(KERN_INFO "eth0 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
++ memcpy(plat_mac0.hwaddr, mac, 6);
++ mac[5]++;
++ printk(KERN_INFO "eth1 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
++ memcpy(plat_mac1.hwaddr, mac, 6);
++ } else {
++ printk(KERN_ERR "fsg mac: read failed\n");
++ }
++ }
++}
++
++static void fsg_flash_remove(struct mtd_info *mtd) {
++}
++
++static struct mtd_notifier fsg_flash_notifier = {
++ .add = fsg_flash_add,
++ .remove = fsg_flash_remove,
++};
++
++static void __init fsg_init(void)
++{
++ ixp4xx_sys_init();
++
++ fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++ fsg_flash_resource.end =
++ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
++
++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++ /* Configure CS2 for operation, 8bit and writable */
++ *IXP4XX_EXP_CS2 = 0xbfff0002;
++
++ /* This is only useful on a modified machine, but it is valuable
++ * to have it first in order to see debug messages, and so that
++ * it does *not* get removed if platform_add_devices fails!
++ */
++ (void)platform_device_register(&fsg_uart);
++
++ platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
++
++ register_mtd_user(&fsg_flash_notifier);
++}
++
++MACHINE_START(FSG, "Freecom FSG-3")
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq,
++ .timer = &ixp4xx_timer,
++ .boot_params = 0x0100,
++ .init_machine = fsg_init,
++MACHINE_END
++
+Index: linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/fsg.h
+===================================================================
+--- /dev/null
++++ linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/fsg.h
+@@ -0,0 +1,58 @@
++/*
++ * include/asm-arm/arch-ixp4xx/fsg.h
++ *
++ * Freecom FSG-3 platform specific definitions
++ *
++ * Author: Rod Whitby <rod@whitby.id.au>
++ * Author: Tomasz Chmielewski <mangoo@wpkg.org>
++ * Maintainers: http://www.nslu2-linux.org
++ *
++ * Based on coyote.h by
++ * Copyright 2004 (c) MontaVista, Software, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#ifndef __ASM_ARCH_HARDWARE_H__
++#error "Do not include this directly, instead #include <asm/hardware.h>"
++#endif
++
++#define FSG_SDA_PIN 12
++#define FSG_SCL_PIN 13
++
++/*
++ * FSG PCI IRQs
++ */
++#define FSG_PCI_MAX_DEV 3
++#define FSG_PCI_IRQ_LINES 3
++
++
++/* PCI controller GPIO to IRQ pin mappings */
++#define FSG_PCI_INTA_PIN 6
++#define FSG_PCI_INTB_PIN 7
++#define FSG_PCI_INTC_PIN 5
++
++/* Buttons */
++
++#define FSG_SB_GPIO 4
++#define FSG_RB_GPIO 9
++#define FSG_UB_GPIO 10
++
++#define FSG_SB_IRQ IRQ_IXP4XX_GPIO4
++#define FSG_RB_IRQ IRQ_IXP4XX_GPIO9
++#define FSG_UB_IRQ IRQ_IXP4XX_GPIO10
++
++#define FSG_SB_BM (1L << FSG_SB_GPIO)
++#define FSG_RB_BM (1L << FSG_RB_GPIO)
++#define FSG_UB_BM (1L << FSG_UB_GPIO)
++
++/* LEDs */
++
++#define FSG_LED_RING_BIT 0
++#define FSG_LED_SYNC_BIT 1
++#define FSG_LED_USB_BIT 2
++#define FSG_LED_SATA_BIT 3
++#define FSG_LED_WAN_BIT 4
++#define FSG_LED_WLAN_BIT 5
+Index: linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/hardware.h
+===================================================================
+--- linux-2.6.21.5-armeb.orig/include/asm-arm/arch-ixp4xx/hardware.h
++++ linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/hardware.h
+@@ -48,5 +48,6 @@ extern unsigned int processor_id;
+ #include "nslu2.h"
+ #include "nas100d.h"
+ #include "dsmg600.h"
++#include "fsg.h"
+
+ #endif /* _ASM_ARCH_HARDWARE_H */
+Index: linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/irqs.h
+===================================================================
+--- linux-2.6.21.5-armeb.orig/include/asm-arm/arch-ixp4xx/irqs.h
++++ linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/irqs.h
+@@ -128,4 +128,11 @@
+ #define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7
+ #define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6
+
++/*
++ * Freecom FSG-3 board IRQs
++ */
++#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6
++#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7
++#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5
++
+ #endif
+--- linux-2.6.21.6/arch/arm/mach-ixp4xx/Makefile~ 2007-07-11 22:20:52.000000000 +0930
++++ linux-2.6.21.6/arch/arm/mach-ixp4xx/Makefile 2007-07-11 22:22:02.000000000 +0930
+@@ -13,6 +13,7 @@
+ obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
+ obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
+ obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
++obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
+ obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
+ obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
+@@ -29,6 +30,7 @@
+ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
+ obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
+ obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
++obj-$(CONFIG_MACH_FSG) += fsg-setup.o
+ obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
+ obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
+ obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
+--- linux-2.6.21.6/arch/arm/mach-ixp4xx/Kconfig~ 2007-07-11 22:23:24.000000000 +0930
++++ linux-2.6.21.6/arch/arm/mach-ixp4xx/Kconfig 2007-07-11 22:23:47.000000000 +0930
+@@ -138,6 +138,14 @@
+ DSM-G600 RevA device. For more information on this platform,
+ see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
+
++config MACH_FSG
++ bool
++ prompt "Freecom FSG-3"
++ help
++ Say 'Y' here if you want your kernel to support Freecom's
++ FSG-3 device. For more information on this
++ platform see http://www.openfsg.com/
++
+ #
+ # Avila and IXDP share the same source for now. Will change in future
+ #