diff options
Diffstat (limited to 'target/linux/ifxmips/files-2.6.32/arch/mips/pci/pci-ifxmips.c')
| -rw-r--r-- | target/linux/ifxmips/files-2.6.32/arch/mips/pci/pci-ifxmips.c | 209 |
1 files changed, 209 insertions, 0 deletions
diff --git a/target/linux/ifxmips/files-2.6.32/arch/mips/pci/pci-ifxmips.c b/target/linux/ifxmips/files-2.6.32/arch/mips/pci/pci-ifxmips.c new file mode 100644 index 0000000000..6ff765e85f --- /dev/null +++ b/target/linux/ifxmips/files-2.6.32/arch/mips/pci/pci-ifxmips.c @@ -0,0 +1,209 @@ +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/mm.h> +#include <asm/addrspace.h> +#include <linux/vmalloc.h> +#include <ifxmips.h> +#include <ifxmips_irq.h> +#include <ifxmips_cgu.h> + +#define IFXMIPS_PCI_MEM_BASE 0x18000000 +#define IFXMIPS_PCI_MEM_SIZE 0x02000000 +#define IFXMIPS_PCI_IO_BASE 0x1AE00000 +#define IFXMIPS_PCI_IO_SIZE 0x00200000 + +extern int ifxmips_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val); +extern int ifxmips_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val); + +struct pci_ops ifxmips_pci_ops = +{ + .read = ifxmips_pci_read_config_dword, + .write = ifxmips_pci_write_config_dword +}; + +static struct resource pci_io_resource = +{ + .name = "io pci IO space", + .start = IFXMIPS_PCI_IO_BASE, + .end = IFXMIPS_PCI_IO_BASE + IFXMIPS_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource pci_mem_resource = +{ + .name = "ext pci memory space", + .start = IFXMIPS_PCI_MEM_BASE, + .end = IFXMIPS_PCI_MEM_BASE + IFXMIPS_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +static struct pci_controller ifxmips_pci_controller = +{ + .pci_ops = &ifxmips_pci_ops, + .mem_resource = &pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_resource = &pci_io_resource, + .io_offset = 0x00000000UL, +}; + +/* the cpu can can generate the 33Mhz or rely on an external clock the cgu needs the + proper setting, otherwise the cpu hangs. we have no way of runtime detecting this */ +u32 ifxmips_pci_mapped_cfg; +int ifxmips_pci_external_clock = 0; + +/* Since the PCI REQ pins can be reused for other functionality, make it possible + to exclude those from interpretation by the PCI controller */ +int ifxmips_pci_req_mask = 0xf; + +static int __init +ifxmips_pci_set_external_clk(char *str) +{ + printk("cgu: setting up external pci clock\n"); + ifxmips_pci_external_clock = 1; + return 1; +} +__setup("pci_external_clk", ifxmips_pci_set_external_clk); + +int +pcibios_plat_dev_init(struct pci_dev *dev) +{ + u8 pin; + + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + switch(pin) + { + case 0: + break; + case 1: + //falling edge level triggered:0x4, low level:0xc, rising edge:0x2 + ifxmips_w32(ifxmips_r32(IFXMIPS_EBU_PCC_CON) | 0xc, IFXMIPS_EBU_PCC_CON); + ifxmips_w32(ifxmips_r32(IFXMIPS_EBU_PCC_IEN) | 0x10, IFXMIPS_EBU_PCC_IEN); + break; + case 2: + case 3: + case 4: + printk ("WARNING: interrupt pin %d not supported yet!\n", pin); + default: + printk ("WARNING: invalid interrupt pin %d\n", pin); + return 1; + } + return 0; +} + +static u32 calc_bar11mask(void) +{ + u32 mem, bar11mask; + + /* BAR11MASK value depends on available memory on system. */ + mem = num_physpages * PAGE_SIZE; + bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) -1)) -1)) | 8; + + return bar11mask; +} + +static void __init +ifxmips_pci_startup(void) +{ + u32 temp_buffer; + + cgu_setup_pci_clk(ifxmips_pci_external_clock); + + ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) | (1 << 5), IFXMIPS_GPIO_P1_OUT); + ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OD) | (1 << 5), IFXMIPS_GPIO_P1_OD); + ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) | (1 << 5), IFXMIPS_GPIO_P1_DIR); + ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL1) & ~(1 << 5), IFXMIPS_GPIO_P1_ALTSEL1); + ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL0) & ~(1 << 5), IFXMIPS_GPIO_P1_ALTSEL0); + ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) & ~0x2000, IFXMIPS_GPIO_P1_DIR); + ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) | 0x4000, IFXMIPS_GPIO_P1_DIR); + ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL1) & ~0x6000, IFXMIPS_GPIO_P1_ALTSEL1); + ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL0) | 0x6000, IFXMIPS_GPIO_P1_ALTSEL0); + /* enable auto-switching between PCI and EBU */ + ifxmips_w32(0xa, PCI_CR_CLK_CTRL); + /* busy, i.e. configuration is not done, PCI access has to be retried */ + ifxmips_w32(ifxmips_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD); + wmb (); + /* BUS Master/IO/MEM access */ + ifxmips_w32(ifxmips_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD); + + /* enable external 2 PCI masters */ + temp_buffer = ifxmips_r32(PCI_CR_PC_ARB); + temp_buffer &= (~(ifxmips_pci_req_mask << 16)); + /* enable internal arbiter */ + temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT); + /* enable internal PCI master reqest */ + temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS)); + + /* enable EBU reqest */ + temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS)); + + /* enable all external masters request */ + temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS)); + ifxmips_w32(temp_buffer, PCI_CR_PC_ARB); + wmb (); + + ifxmips_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0); + ifxmips_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1); + ifxmips_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2); + ifxmips_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3); + ifxmips_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4); + ifxmips_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5); + ifxmips_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6); + ifxmips_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7); + ifxmips_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg); + ifxmips_w32(calc_bar11mask(), PCI_CR_BAR11MASK); + ifxmips_w32(0, PCI_CR_PCI_ADDR_MAP11); + ifxmips_w32(0, PCI_CS_BASE_ADDR1); +#ifdef CONFIG_SWAP_IO_SPACE + /* both TX and RX endian swap are enabled */ + ifxmips_w32(ifxmips_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI); + wmb (); +#endif + /*TODO: disable BAR2 & BAR3 - why was this in the origianl infineon code */ + ifxmips_w32(ifxmips_r32(PCI_CR_BAR12MASK) | 0x80000000, PCI_CR_BAR12MASK); + ifxmips_w32(ifxmips_r32(PCI_CR_BAR13MASK) | 0x80000000, PCI_CR_BAR13MASK); + /*use 8 dw burst length */ + ifxmips_w32(0x303, PCI_CR_FCI_BURST_LENGTH); + ifxmips_w32(ifxmips_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD); + wmb(); + ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) & ~(1 << 5), IFXMIPS_GPIO_P1_OUT); + wmb(); + mdelay(1); + ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) | (1 << 5), IFXMIPS_GPIO_P1_OUT); +} + +int __init +pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin){ + switch(slot) + { + case 13: + /* IDSEL = AD29 --> USB Host Controller */ + return (INT_NUM_IM1_IRL0 + 17); + case 14: + /* IDSEL = AD30 --> mini PCI connector */ + return (INT_NUM_IM0_IRL0 + 22); + default: + printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin); + return 0; + } +} + +int __init +pcibios_init(void) +{ + extern int pci_probe_only; + + pci_probe_only = 0; + printk("PCI: Probing PCI hardware on host bus 0.\n"); + ifxmips_pci_startup (); + ifxmips_pci_mapped_cfg = (u32)ioremap_nocache(0x17000000, 0x800 * 16); + printk("IFXMips PCI mapped to 0x%08lX\n", (unsigned long)ifxmips_pci_mapped_cfg); + ifxmips_pci_controller.io_map_base = (unsigned long)ioremap(IFXMIPS_PCI_IO_BASE, IFXMIPS_PCI_IO_SIZE - 1); + printk("IFXMips PCI I/O mapped to 0x%08lX\n", (unsigned long)ifxmips_pci_controller.io_map_base); + register_pci_controller(&ifxmips_pci_controller); + return 0; +} + +arch_initcall(pcibios_init); |