diff options
Diffstat (limited to 'target/linux/generic/patches-2.6.30/941-ssb_update.patch')
| -rw-r--r-- | target/linux/generic/patches-2.6.30/941-ssb_update.patch | 964 |
1 files changed, 913 insertions, 51 deletions
diff --git a/target/linux/generic/patches-2.6.30/941-ssb_update.patch b/target/linux/generic/patches-2.6.30/941-ssb_update.patch index 0edfc48190..3b54067d74 100644 --- a/target/linux/generic/patches-2.6.30/941-ssb_update.patch +++ b/target/linux/generic/patches-2.6.30/941-ssb_update.patch @@ -43,7 +43,92 @@ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c -@@ -209,6 +209,24 @@ static void chipco_powercontrol_init(str +@@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb + if (!ccdev) + return; + bus = ccdev->bus; ++ ++ /* We support SLOW only on 6..9 */ ++ if (ccdev->id.revision >= 10 && mode == SSB_CLKMODE_SLOW) ++ mode = SSB_CLKMODE_DYNAMIC; ++ ++ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) ++ return; /* PMU controls clockmode, separated function needed */ ++ SSB_WARN_ON(ccdev->id.revision >= 20); ++ + /* chipcommon cores prior to rev6 don't support dynamic clock control */ + if (ccdev->id.revision < 6) + return; +- /* chipcommon cores rev10 are a whole new ball game */ ++ ++ /* ChipCommon cores rev10+ need testing */ + if (ccdev->id.revision >= 10) + return; ++ + if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL)) + return; + + switch (mode) { +- case SSB_CLKMODE_SLOW: ++ case SSB_CLKMODE_SLOW: /* For revs 6..9 only */ + tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); + tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW; + chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); + break; + case SSB_CLKMODE_FAST: +- ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */ +- tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); +- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; +- tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL; +- chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); ++ if (ccdev->id.revision < 10) { ++ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */ ++ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); ++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; ++ tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL; ++ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); ++ } else { ++ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL, ++ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) | ++ SSB_CHIPCO_SYSCLKCTL_FORCEHT)); ++ /* udelay(150); TODO: not available in early init */ ++ } + break; + case SSB_CLKMODE_DYNAMIC: +- tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); +- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; +- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL; +- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL; +- if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL) +- tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL; +- chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); +- +- /* for dynamic control, we have to release our xtal_pu "force on" */ +- if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL) +- ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0); ++ if (ccdev->id.revision < 10) { ++ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); ++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; ++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL; ++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL; ++ if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != ++ SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL) ++ tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL; ++ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); ++ ++ /* For dynamic control, we have to release our xtal_pu ++ * "force on" */ ++ if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL) ++ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0); ++ } else { ++ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL, ++ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) & ++ ~SSB_CHIPCO_SYSCLKCTL_FORCEHT)); ++ } + break; + default: + SSB_WARN_ON(1); +@@ -209,6 +235,24 @@ static void chipco_powercontrol_init(str } } @@ -68,7 +153,7 @@ static void calc_fast_powerup_delay(struct ssb_chipcommon *cc) { struct ssb_bus *bus = cc->dev->bus; -@@ -218,6 +236,12 @@ static void calc_fast_powerup_delay(stru +@@ -218,6 +262,12 @@ static void calc_fast_powerup_delay(stru if (bus->bustype != SSB_BUSTYPE_PCI) return; @@ -81,17 +166,23 @@ if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL)) return; -@@ -233,6 +257,9 @@ void ssb_chipcommon_init(struct ssb_chip +@@ -233,6 +283,15 @@ void ssb_chipcommon_init(struct ssb_chip { if (!cc->dev) return; /* We don't have a ChipCommon */ + if (cc->dev->id.revision >= 11) + cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); + ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status); ++ ++ if (cc->dev->id.revision >= 20) { ++ chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0); ++ chipco_write32(cc, SSB_CHIPCO_GPIOPULLDOWN, 0); ++ } ++ ssb_pmu_init(cc); chipco_powercontrol_init(cc); ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); -@@ -370,6 +397,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c +@@ -370,6 +429,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c { return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value); } @@ -136,15 +227,25 @@ default: ssb_printk(KERN_ERR PFX "ERROR: PLL init unknown for device %04X\n", -@@ -402,6 +423,7 @@ static void ssb_pmu_resources_init(struc +@@ -396,12 +417,15 @@ static void ssb_pmu_resources_init(struc + u32 min_msk = 0, max_msk = 0; + unsigned int i; + const struct pmu_res_updown_tab_entry *updown_tab = NULL; +- unsigned int updown_tab_size; ++ unsigned int updown_tab_size = 0; + const struct pmu_res_depend_tab_entry *depend_tab = NULL; +- unsigned int depend_tab_size; ++ unsigned int depend_tab_size = 0; switch (bus->chip_id) { case 0x4312: ++ min_msk = 0xCBB; ++ break; + case 0x4322: /* We keep the default settings: * min_msk = 0xCBB * max_msk = 0x7FFFF -@@ -480,9 +502,9 @@ static void ssb_pmu_resources_init(struc +@@ -480,9 +504,9 @@ static void ssb_pmu_resources_init(struc chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk); } @@ -155,7 +256,7 @@ u32 pmucap; if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU)) -@@ -494,15 +516,91 @@ void ssb_pmu_init(struct ssb_chipcommon +@@ -494,15 +518,91 @@ void ssb_pmu_init(struct ssb_chipcommon ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, pmucap); @@ -266,6 +367,40 @@ /* +@@ -105,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige + gige_write32(dev, SSB_GIGE_PCICFG + offset, value); + } + +-static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn, +- int reg, int size, u32 *val) ++static int __devinit ssb_gige_pci_read_config(struct pci_bus *bus, ++ unsigned int devfn, int reg, ++ int size, u32 *val) + { + struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops); + unsigned long flags; +@@ -135,8 +137,9 @@ static int ssb_gige_pci_read_config(stru + return PCIBIOS_SUCCESSFUL; + } + +-static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn, +- int reg, int size, u32 val) ++static int __devinit ssb_gige_pci_write_config(struct pci_bus *bus, ++ unsigned int devfn, int reg, ++ int size, u32 val) + { + struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops); + unsigned long flags; +@@ -165,7 +168,8 @@ static int ssb_gige_pci_write_config(str + return PCIBIOS_SUCCESSFUL; + } + +-static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id) ++static int __devinit ssb_gige_probe(struct ssb_device *sdev, ++ const struct ssb_device_id *id) + { + struct ssb_gige *dev; + u32 base, tmslow, tmshigh; --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c @@ -49,29 +49,54 @@ static const u32 ipsflag_irq_shift[] = { @@ -432,7 +567,19 @@ ssb_mips_flash_detect(mcore); --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c -@@ -246,20 +246,12 @@ static struct pci_controller ssb_pcicore +@@ -15,6 +15,11 @@ + + #include "ssb_private.h" + ++static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address); ++static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data); ++static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address); ++static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, ++ u8 address, u16 data); + + static inline + u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset) +@@ -246,20 +251,12 @@ static struct pci_controller ssb_pcicore .pci_ops = &ssb_pcicore_pciops, .io_resource = &ssb_pcicore_io_resource, .mem_resource = &ssb_pcicore_mem_resource, @@ -453,7 +600,7 @@ if (d->bus->ops != &ssb_pcicore_pciops) { /* This is not a device on the PCI-core bridge. */ return -ENODEV; -@@ -268,27 +260,6 @@ int ssb_pcicore_plat_dev_init(struct pci +@@ -268,27 +265,6 @@ int ssb_pcicore_plat_dev_init(struct pci ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", pci_name(d)); @@ -481,7 +628,293 @@ /* Fix up interrupt lines */ d->irq = ssb_mips_irq(extpci_core->dev) + 2; pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); -@@ -551,13 +522,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc +@@ -338,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st + return ssb_mips_irq(extpci_core->dev) + 2; + } + +-static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) ++static void __devinit ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) + { + u32 val; + +@@ -403,7 +379,7 @@ static void ssb_pcicore_init_hostmode(st + register_pci_controller(&ssb_pcicore_controller); + } + +-static int pcicore_is_in_hostmode(struct ssb_pcicore *pc) ++static int __devinit pcicore_is_in_hostmode(struct ssb_pcicore *pc) + { + struct ssb_bus *bus = pc->dev->bus; + u16 chipid_top; +@@ -432,25 +408,133 @@ static int pcicore_is_in_hostmode(struct + } + #endif /* CONFIG_SSB_PCICORE_HOSTMODE */ + ++/************************************************** ++ * Workarounds. ++ **************************************************/ ++ ++static void __devinit ssb_pcicore_fix_sprom_core_index(struct ssb_pcicore *pc) ++{ ++ u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0)); ++ if (((tmp & 0xF000) >> 12) != pc->dev->core_index) { ++ tmp &= ~0xF000; ++ tmp |= (pc->dev->core_index << 12); ++ pcicore_write16(pc, SSB_PCICORE_SPROM(0), tmp); ++ } ++} ++ ++static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc) ++{ ++ return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; ++} ++ ++static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc) ++{ ++ const u8 serdes_pll_device = 0x1D; ++ const u8 serdes_rx_device = 0x1F; ++ u16 tmp; ++ ++ ssb_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, ++ ssb_pcicore_polarity_workaround(pc)); ++ tmp = ssb_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); ++ if (tmp & 0x4000) ++ ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); ++} ++ ++static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc) ++{ ++ struct ssb_device *pdev = pc->dev; ++ struct ssb_bus *bus = pdev->bus; ++ u32 tmp; ++ ++ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); ++ tmp |= SSB_PCICORE_SBTOPCI_PREF; ++ tmp |= SSB_PCICORE_SBTOPCI_BURST; ++ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); ++ ++ if (pdev->id.revision < 5) { ++ tmp = ssb_read32(pdev, SSB_IMCFGLO); ++ tmp &= ~SSB_IMCFGLO_SERTO; ++ tmp |= 2; ++ tmp &= ~SSB_IMCFGLO_REQTO; ++ tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT; ++ ssb_write32(pdev, SSB_IMCFGLO, tmp); ++ ssb_commit_settings(bus); ++ } else if (pdev->id.revision >= 11) { ++ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); ++ tmp |= SSB_PCICORE_SBTOPCI_MRM; ++ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); ++ } ++} ++ ++static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc) ++{ ++ u32 tmp; ++ u8 rev = pc->dev->id.revision; ++ ++ if (rev == 0 || rev == 1) { ++ /* TLP Workaround register. */ ++ tmp = ssb_pcie_read(pc, 0x4); ++ tmp |= 0x8; ++ ssb_pcie_write(pc, 0x4, tmp); ++ } ++ if (rev == 1) { ++ /* DLLP Link Control register. */ ++ tmp = ssb_pcie_read(pc, 0x100); ++ tmp |= 0x40; ++ ssb_pcie_write(pc, 0x100, tmp); ++ } ++ ++ if (rev == 0) { ++ const u8 serdes_rx_device = 0x1F; ++ ++ ssb_pcie_mdio_write(pc, serdes_rx_device, ++ 2 /* Timer */, 0x8128); ++ ssb_pcie_mdio_write(pc, serdes_rx_device, ++ 6 /* CDR */, 0x0100); ++ ssb_pcie_mdio_write(pc, serdes_rx_device, ++ 7 /* CDR BW */, 0x1466); ++ } else if (rev == 3 || rev == 4 || rev == 5) { ++ /* TODO: DLLP Power Management Threshold */ ++ ssb_pcicore_serdes_workaround(pc); ++ /* TODO: ASPM */ ++ } else if (rev == 7) { ++ /* TODO: No PLL down */ ++ } ++ ++ if (rev >= 6) { ++ /* Miscellaneous Configuration Fixup */ ++ tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(5)); ++ if (!(tmp & 0x8000)) ++ pcicore_write16(pc, SSB_PCICORE_SPROM(5), ++ tmp | 0x8000); ++ } ++} + + /************************************************** + * Generic and Clientmode operation code. + **************************************************/ + +-static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) ++static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) + { ++ ssb_pcicore_fix_sprom_core_index(pc); ++ + /* Disable PCI interrupts. */ + ssb_write32(pc->dev, SSB_INTVEC, 0); ++ ++ /* Additional PCIe always once-executed workarounds */ ++ if (pc->dev->id.coreid == SSB_DEV_PCIE) { ++ ssb_pcicore_serdes_workaround(pc); ++ /* TODO: ASPM */ ++ /* TODO: Clock Request Update */ ++ } + } + +-void ssb_pcicore_init(struct ssb_pcicore *pc) ++void __devinit ssb_pcicore_init(struct ssb_pcicore *pc) + { + struct ssb_device *dev = pc->dev; +- struct ssb_bus *bus; + + if (!dev) + return; +- bus = dev->bus; + if (!ssb_device_is_enabled(dev)) + ssb_device_enable(dev, 0); + +@@ -475,58 +559,104 @@ static void ssb_pcie_write(struct ssb_pc + pcicore_write32(pc, 0x134, data); + } + +-static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, +- u8 address, u16 data) ++static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy) + { + const u16 mdio_control = 0x128; + const u16 mdio_data = 0x12C; + u32 v; + int i; + ++ v = (1 << 30); /* Start of Transaction */ ++ v |= (1 << 28); /* Write Transaction */ ++ v |= (1 << 17); /* Turnaround */ ++ v |= (0x1F << 18); ++ v |= (phy << 4); ++ pcicore_write32(pc, mdio_data, v); ++ ++ udelay(10); ++ for (i = 0; i < 200; i++) { ++ v = pcicore_read32(pc, mdio_control); ++ if (v & 0x100 /* Trans complete */) ++ break; ++ msleep(1); ++ } ++} ++ ++static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address) ++{ ++ const u16 mdio_control = 0x128; ++ const u16 mdio_data = 0x12C; ++ int max_retries = 10; ++ u16 ret = 0; ++ u32 v; ++ int i; ++ + v = 0x80; /* Enable Preamble Sequence */ + v |= 0x2; /* MDIO Clock Divisor */ + pcicore_write32(pc, mdio_control, v); + ++ if (pc->dev->id.revision >= 10) { ++ max_retries = 200; ++ ssb_pcie_mdio_set_phy(pc, device); ++ } ++ + v = (1 << 30); /* Start of Transaction */ +- v |= (1 << 28); /* Write Transaction */ ++ v |= (1 << 29); /* Read Transaction */ + v |= (1 << 17); /* Turnaround */ +- v |= (u32)device << 22; ++ if (pc->dev->id.revision < 10) ++ v |= (u32)device << 22; + v |= (u32)address << 18; +- v |= data; + pcicore_write32(pc, mdio_data, v); + /* Wait for the device to complete the transaction */ + udelay(10); +- for (i = 0; i < 10; i++) { ++ for (i = 0; i < max_retries; i++) { + v = pcicore_read32(pc, mdio_control); +- if (v & 0x100 /* Trans complete */) ++ if (v & 0x100 /* Trans complete */) { ++ udelay(10); ++ ret = pcicore_read32(pc, mdio_data); + break; ++ } + msleep(1); + } + pcicore_write32(pc, mdio_control, 0); ++ return ret; + } + +-static void ssb_broadcast_value(struct ssb_device *dev, +- u32 address, u32 data) ++static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, ++ u8 address, u16 data) + { +- /* This is used for both, PCI and ChipCommon core, so be careful. */ +- BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR); +- BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA); ++ const u16 mdio_control = 0x128; ++ const u16 mdio_data = 0x12C; ++ int max_retries = 10; ++ u32 v; ++ int i; + +- ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address); +- ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */ +- ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data); +- ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */ +-} ++ v = 0x80; /* Enable Preamble Sequence */ ++ v |= 0x2; /* MDIO Clock Divisor */ ++ pcicore_write32(pc, mdio_control, v); + +-static void ssb_commit_settings(struct ssb_bus *bus) +-{ +- struct ssb_device *dev; ++ if (pc->dev->id.revision >= 10) { ++ max_retries = 200; ++ ssb_pcie_mdio_set_phy(pc, device); ++ } + +- dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev; +- if (WARN_ON(!dev)) +- return; +- /* This forces an update of the cached registers. */ +- ssb_broadcast_value(dev, 0xFD8, 0); ++ v = (1 << 30); /* Start of Transaction */ ++ v |= (1 << 28); /* Write Transaction */ ++ v |= (1 << 17); /* Turnaround */ ++ if (pc->dev->id.revision < 10) ++ v |= (u32)device << 22; ++ v |= (u32)address << 18; ++ v |= data; ++ pcicore_write32(pc, mdio_data, v); ++ /* Wait for the device to complete the transaction */ ++ udelay(10); ++ for (i = 0; i < max_retries; i++) { ++ v = pcicore_read32(pc, mdio_control); ++ if (v & 0x100 /* Trans complete */) ++ break; ++ msleep(1); ++ } ++ pcicore_write32(pc, mdio_control, 0); + } + + int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, +@@ -551,13 +681,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc might_sleep_if(pdev->id.coreid != SSB_DEV_PCI); /* Enable interrupts for this device. */ @@ -497,6 +930,57 @@ err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp); if (err) goto out; +@@ -579,48 +709,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc + if (pc->setup_done) + goto out; + if (pdev->id.coreid == SSB_DEV_PCI) { +- tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); +- tmp |= SSB_PCICORE_SBTOPCI_PREF; +- tmp |= SSB_PCICORE_SBTOPCI_BURST; +- pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); +- +- if (pdev->id.revision < 5) { +- tmp = ssb_read32(pdev, SSB_IMCFGLO); +- tmp &= ~SSB_IMCFGLO_SERTO; +- tmp |= 2; +- tmp &= ~SSB_IMCFGLO_REQTO; +- tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT; +- ssb_write32(pdev, SSB_IMCFGLO, tmp); +- ssb_commit_settings(bus); +- } else if (pdev->id.revision >= 11) { +- tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); +- tmp |= SSB_PCICORE_SBTOPCI_MRM; +- pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); +- } ++ ssb_pcicore_pci_setup_workarounds(pc); + } else { + WARN_ON(pdev->id.coreid != SSB_DEV_PCIE); +- //TODO: Better make defines for all these magic PCIE values. +- if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) { +- /* TLP Workaround register. */ +- tmp = ssb_pcie_read(pc, 0x4); +- tmp |= 0x8; +- ssb_pcie_write(pc, 0x4, tmp); +- } +- if (pdev->id.revision == 0) { +- const u8 serdes_rx_device = 0x1F; +- +- ssb_pcie_mdio_write(pc, serdes_rx_device, +- 2 /* Timer */, 0x8128); +- ssb_pcie_mdio_write(pc, serdes_rx_device, +- 6 /* CDR */, 0x0100); +- ssb_pcie_mdio_write(pc, serdes_rx_device, +- 7 /* CDR BW */, 0x1466); +- } else if (pdev->id.revision == 1) { +- /* DLLP Link Control register. */ +- tmp = ssb_pcie_read(pc, 0x100); +- tmp |= 0x40; +- ssb_pcie_write(pc, 0x100, tmp); +- } ++ ssb_pcicore_pcie_setup_workarounds(pc); + } + pc->setup_done = 1; + out: --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -17,6 +17,8 @@ @@ -609,13 +1093,13 @@ - if (!dev->dev || - !dev->dev->driver || - !device_is_registered(dev->dev)) +- continue; +- drv = drv_to_ssb_drv(dev->dev->driver); +- if (!drv) + sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); + if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { + ssb_device_put(sdev); continue; -- drv = drv_to_ssb_drv(dev->dev->driver); -- if (!drv) -- continue; - err = drv->suspend(dev, state); - if (err) { - ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n", @@ -764,6 +1248,28 @@ break; } +@@ -497,7 +559,7 @@ error: + } + + /* Needs ssb_buses_lock() */ +-static int ssb_attach_queued_buses(void) ++static int __devinit ssb_attach_queued_buses(void) + { + struct ssb_bus *bus, *n; + int err = 0; +@@ -708,9 +770,9 @@ out: + return err; + } + +-static int ssb_bus_register(struct ssb_bus *bus, +- ssb_invariants_func_t get_invariants, +- unsigned long baseaddr) ++static int __devinit ssb_bus_register(struct ssb_bus *bus, ++ ssb_invariants_func_t get_invariants, ++ unsigned long baseaddr) + { + int err; + @@ -724,12 +786,18 @@ static int ssb_bus_register(struct ssb_b err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); if (err) @@ -793,6 +1299,17 @@ err_disable_xtal: ssb_buses_unlock(); ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); +@@ -783,8 +853,8 @@ err_disable_xtal: + } + + #ifdef CONFIG_SSB_PCIHOST +-int ssb_bus_pcibus_register(struct ssb_bus *bus, +- struct pci_dev *host_pci) ++int __devinit ssb_bus_pcibus_register(struct ssb_bus *bus, ++ struct pci_dev *host_pci) + { + int err; + @@ -796,6 +866,9 @@ int ssb_bus_pcibus_register(struct ssb_b if (!err) { ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " @@ -803,13 +1320,30 @@ } return err; -@@ -825,6 +898,28 @@ int ssb_bus_pcmciabus_register(struct ss +@@ -804,9 +877,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); + #endif /* CONFIG_SSB_PCIHOST */ + + #ifdef CONFIG_SSB_PCMCIAHOST +-int ssb_bus_pcmciabus_register(struct ssb_bus *bus, +- struct pcmcia_device *pcmcia_dev, +- unsigned long baseaddr) ++int __devinit ssb_bus_pcmciabus_register(struct ssb_bus *bus, ++ struct pcmcia_device *pcmcia_dev, ++ unsigned long baseaddr) + { + int err; + +@@ -825,9 +898,32 @@ int ssb_bus_pcmciabus_register(struct ss EXPORT_SYMBOL(ssb_bus_pcmciabus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ +-int ssb_bus_ssbbus_register(struct ssb_bus *bus, +- unsigned long baseaddr, +- ssb_invariants_func_t get_invariants) +#ifdef CONFIG_SSB_SDIOHOST -+int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func, -+ unsigned int quirks) ++int __devinit ssb_bus_sdiobus_register(struct ssb_bus *bus, ++ struct sdio_func *func, ++ unsigned int quirks) +{ + int err; + @@ -829,9 +1363,54 @@ +EXPORT_SYMBOL(ssb_bus_sdiobus_register); +#endif /* CONFIG_SSB_PCMCIAHOST */ + - int ssb_bus_ssbbus_register(struct ssb_bus *bus, - unsigned long baseaddr, - ssb_invariants_func_t get_invariants) ++int __devinit ssb_bus_ssbbus_register(struct ssb_bus *bus, ++ unsigned long baseaddr, ++ ssb_invariants_func_t get_invariants) + { + int err; + +@@ -908,8 +1004,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 + switch (plltype) { + case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ + if (m & SSB_CHIPCO_CLK_T6_MMASK) +- return SSB_CHIPCO_CLK_T6_M0; +- return SSB_CHIPCO_CLK_T6_M1; ++ return SSB_CHIPCO_CLK_T6_M1; ++ return SSB_CHIPCO_CLK_T6_M0; + case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ + case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ + case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ +@@ -1024,23 +1120,22 @@ static u32 ssb_tmslow_reject_bitmask(str + { + u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; + +- /* The REJECT bit changed position in TMSLOW between +- * Backplane revisions. */ ++ /* The REJECT bit seems to be different for Backplane rev 2.3 */ + switch (rev) { + case SSB_IDLOW_SSBREV_22: +- return SSB_TMSLOW_REJECT_22; ++ case SSB_IDLOW_SSBREV_24: ++ case SSB_IDLOW_SSBREV_26: ++ return SSB_TMSLOW_REJECT; + case SSB_IDLOW_SSBREV_23: + return SSB_TMSLOW_REJECT_23; +- case SSB_IDLOW_SSBREV_24: /* TODO - find the proper REJECT bits */ +- case SSB_IDLOW_SSBREV_25: /* same here */ +- case SSB_IDLOW_SSBREV_26: /* same here */ ++ case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */ + case SSB_IDLOW_SSBREV_27: /* same here */ +- return SSB_TMSLOW_REJECT_23; /* this is a guess */ ++ return SSB_TMSLOW_REJECT; /* this is a guess */ + default: + printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev); + WARN_ON(1); + } +- return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23); ++ return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23); + } + + int ssb_device_is_enabled(struct ssb_device *dev) @@ -1099,10 +1194,10 @@ void ssb_device_enable(struct ssb_device } EXPORT_SYMBOL(ssb_device_enable); @@ -903,7 +1482,82 @@ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_RESET | -@@ -1358,8 +1471,10 @@ static int __init ssb_modinit(void) +@@ -1155,7 +1268,10 @@ u32 ssb_dma_translation(struct ssb_devic + case SSB_BUSTYPE_SSB: + return 0; + case SSB_BUSTYPE_PCI: +- return SSB_PCI_DMA; ++ if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) ++ return SSB_PCIE_DMA_H32; ++ else ++ return SSB_PCI_DMA; + default: + __ssb_dma_not_implemented(dev); + } +@@ -1272,20 +1388,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); + + int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) + { +- struct ssb_chipcommon *cc; + int err; + enum ssb_clkmode mode; + + err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); + if (err) + goto error; +- cc = &bus->chipco; +- mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; +- ssb_chipco_set_clockmode(cc, mode); + + #ifdef CONFIG_SSB_DEBUG + bus->powered_up = 1; + #endif ++ ++ mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; ++ ssb_chipco_set_clockmode(&bus->chipco, mode); ++ + return 0; + error: + ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); +@@ -1293,6 +1409,37 @@ error: + } + EXPORT_SYMBOL(ssb_bus_powerup); + ++static void ssb_broadcast_value(struct ssb_device *dev, ++ u32 address, u32 data) ++{ ++#ifdef CONFIG_SSB_DRIVER_PCICORE ++ /* This is used for both, PCI and ChipCommon core, so be careful. */ ++ BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR); ++ BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA); ++#endif ++ ++ ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address); ++ ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */ ++ ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data); ++ ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */ ++} ++ ++void ssb_commit_settings(struct ssb_bus *bus) ++{ ++ struct ssb_device *dev; ++ ++#ifdef CONFIG_SSB_DRIVER_PCICORE ++ dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev; ++#else ++ dev = bus->chipco.dev; ++#endif ++ if (WARN_ON(!dev)) ++ return; ++ /* This forces an update of the cached registers. */ ++ ssb_broadcast_value(dev, 0xFD8, 0); ++} ++EXPORT_SYMBOL(ssb_commit_settings); ++ + u32 ssb_admatch_base(u32 adm) + { + u32 base = 0; +@@ -1358,8 +1505,10 @@ static int __init ssb_modinit(void) ssb_buses_lock(); err = ssb_attach_queued_buses(); ssb_buses_unlock(); @@ -915,7 +1569,7 @@ err = b43_pci_ssb_bridge_init(); if (err) { -@@ -1375,7 +1490,7 @@ static int __init ssb_modinit(void) +@@ -1375,7 +1524,7 @@ static int __init ssb_modinit(void) /* don't fail SSB init because of this */ err = 0; } @@ -1181,10 +1835,11 @@ } if (out->boardflags_lo == 0xFFFF) -@@ -565,12 +663,34 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -564,13 +662,34 @@ static int sprom_extract(struct ssb_bus + static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { - const struct ssb_sprom *fallback; +- const struct ssb_sprom *fallback; - int err = -ENOMEM; + int err; u16 *buf; @@ -1193,7 +1848,7 @@ + ssb_printk(KERN_ERR PFX "No SPROM available!\n"); + return -ENODEV; + } -+ if (bus->chipco.dev) { /* can be unavailible! */ ++ if (bus->chipco.dev) { /* can be unavailable! */ + /* + * get SPROM offset: SSB_SPROM_BASE1 except for + * chipcommon rev >= 31 or chip ID is 0x4312 and @@ -1218,7 +1873,7 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -580,7 +700,7 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -580,17 +699,24 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); if (!buf) @@ -1227,7 +1882,28 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R4; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -602,7 +722,6 @@ static int ssb_pci_sprom_get(struct ssb_ + if (err) { + /* All CRC attempts failed. + * Maybe there is no SPROM on the device? +- * If we have a fallback, use that. */ +- fallback = ssb_get_fallback_sprom(); +- if (fallback) { +- memcpy(sprom, fallback, sizeof(*sprom)); ++ * Now we ask the arch code if there is some sprom ++ * available for this device in some other storage */ ++ err = ssb_fill_sprom_with_fallback(bus, sprom); ++ if (err) { ++ ssb_printk(KERN_WARNING PFX "WARNING: Using" ++ " fallback SPROM failed (err %d)\n", ++ err); ++ } else { ++ ssb_dprintk(KERN_DEBUG PFX "Using SPROM" ++ " revision %d provided by" ++ " platform.\n", sprom->revision); + err = 0; + goto out_free; + } +@@ -602,19 +728,15 @@ static int ssb_pci_sprom_get(struct ssb_ out_free: kfree(buf); @@ -1235,6 +1911,21 @@ return err; } + static void ssb_pci_get_boardinfo(struct ssb_bus *bus, + struct ssb_boardinfo *bi) + { +- pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID, +- &bi->vendor); +- pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID, +- &bi->type); +- pci_read_config_word(bus->host_pci, PCI_REVISION_ID, +- &bi->rev); ++ bi->vendor = bus->host_pci->subsystem_vendor; ++ bi->type = bus->host_pci->subsystem_device; ++ bi->rev = bus->host_pci->revision; + } + + int ssb_pci_get_invariants(struct ssb_bus *bus, --- a/drivers/ssb/pcihost_wrapper.c +++ b/drivers/ssb/pcihost_wrapper.c @@ -12,6 +12,7 @@ @@ -1245,7 +1936,15 @@ #include <linux/ssb/ssb.h> -@@ -58,6 +59,7 @@ static int ssb_pcihost_probe(struct pci_ +@@ -52,12 +53,13 @@ static int ssb_pcihost_resume(struct pci + # define ssb_pcihost_resume NULL + #endif /* CONFIG_PM */ + +-static int ssb_pcihost_probe(struct pci_dev *dev, +- const struct pci_device_id *id) ++static int __devinit ssb_pcihost_probe(struct pci_dev *dev, ++ const struct pci_device_id *id) + { struct ssb_bus *ssb; int err = -ENOMEM; const char *name; @@ -1266,6 +1965,15 @@ err = ssb_bus_pcibus_register(ssb, dev); if (err) goto err_pci_release_regions; +@@ -102,7 +110,7 @@ static void ssb_pcihost_remove(struct pc + pci_set_drvdata(dev, NULL); + } + +-int ssb_pcihost_register(struct pci_driver *driver) ++int __devinit ssb_pcihost_register(struct pci_driver *driver) + { + driver->probe = ssb_pcihost_probe; + driver->remove = ssb_pcihost_remove; --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c @@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(st @@ -1593,7 +2301,29 @@ } return mmio; -@@ -339,7 +354,7 @@ int ssb_bus_scan(struct ssb_bus *bus, +@@ -245,7 +260,10 @@ static int we_support_multiple_80211_cor + #ifdef CONFIG_SSB_PCIHOST + if (bus->bustype == SSB_BUSTYPE_PCI) { + if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM && +- bus->host_pci->device == 0x4324) ++ ((bus->host_pci->device == 0x4313) || ++ (bus->host_pci->device == 0x431A) || ++ (bus->host_pci->device == 0x4321) || ++ (bus->host_pci->device == 0x4324))) + return 1; + } + #endif /* CONFIG_SSB_PCIHOST */ +@@ -294,8 +312,7 @@ int ssb_bus_scan(struct ssb_bus *bus, + } else { + if (bus->bustype == SSB_BUSTYPE_PCI) { + bus->chip_id = pcidev_to_chipid(bus->host_pci); +- pci_read_config_word(bus->host_pci, PCI_REVISION_ID, +- &bus->chip_rev); ++ bus->chip_rev = bus->host_pci->revision; + bus->chip_package = 0; + } else { + bus->chip_id = 0x4710; +@@ -339,7 +356,7 @@ int ssb_bus_scan(struct ssb_bus *bus, dev->bus = bus; dev->ops = bus->ops; @@ -1602,7 +2332,7 @@ "Core %d found: %s " "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n", i, ssb_core_name(dev->id.coreid), -@@ -407,6 +422,16 @@ int ssb_bus_scan(struct ssb_bus *bus, +@@ -407,6 +424,16 @@ int ssb_bus_scan(struct ssb_bus *bus, bus->pcicore.dev = dev; #endif /* CONFIG_SSB_DRIVER_PCICORE */ break; @@ -2234,16 +2964,19 @@ +} --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c -@@ -13,6 +13,9 @@ +@@ -13,8 +13,11 @@ #include "ssb_private.h" +#include <linux/ctype.h> +#include <linux/slab.h> + +-static const struct ssb_sprom *fallback_sprom; + ++static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out); - static const struct ssb_sprom *fallback_sprom; + static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len, @@ -33,17 +36,27 @@ static int sprom2hex(const u16 *sprom, c static int hex2sprom(u16 *sprom, const char *dump, size_t len, size_t sprom_size_words) @@ -2305,10 +3038,65 @@ if (err) ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n"); out_unlock: -@@ -167,3 +176,18 @@ const struct ssb_sprom *ssb_get_fallback +@@ -136,34 +145,56 @@ out: + } + + /** +- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found. ++ * ssb_arch_register_fallback_sprom - Registers a method providing a ++ * fallback SPROM if no SPROM is found. + * +- * @sprom: The SPROM data structure to register. ++ * @sprom_callback: The callback function. + * +- * With this function the architecture implementation may register a fallback +- * SPROM data structure. The fallback is only used for PCI based SSB devices, +- * where no valid SPROM can be found in the shadow registers. ++ * With this function the architecture implementation may register a ++ * callback handler which fills the SPROM data structure. The fallback is ++ * only used for PCI based SSB devices, where no valid SPROM can be found ++ * in the shadow registers. + * +- * This function is useful for weird architectures that have a half-assed SSB device +- * hardwired to their PCI bus. ++ * This function is useful for weird architectures that have a half-assed ++ * SSB device hardwired to their PCI bus. + * +- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently +- * don't use this fallback. +- * Architectures must provide the SPROM for native SSB devices anyway, +- * so the fallback also isn't used for native devices. ++ * Note that it does only work with PCI attached SSB devices. PCMCIA ++ * devices currently don't use this fallback. ++ * Architectures must provide the SPROM for native SSB devices anyway, so ++ * the fallback also isn't used for native devices. + * +- * This function is available for architecture code, only. So it is not exported. ++ * This function is available for architecture code, only. So it is not ++ * exported. + */ +-int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom) ++int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus, ++ struct ssb_sprom *out)) { - return fallback_sprom; +- if (fallback_sprom) ++ if (get_fallback_sprom) + return -EEXIST; +- fallback_sprom = sprom; ++ get_fallback_sprom = sprom_callback; + + return 0; } + +-const struct ssb_sprom *ssb_get_fallback_sprom(void) ++int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out) + { +- return fallback_sprom; ++ if (!get_fallback_sprom) ++ return -ENOENT; ++ ++ return get_fallback_sprom(bus, out); ++} + +/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ +bool ssb_is_sprom_available(struct ssb_bus *bus) @@ -2318,12 +3106,12 @@ + /* this routine differs from specs as we do not access SPROM directly + on PCMCIA */ + if (bus->bustype == SSB_BUSTYPE_PCI && -+ bus->chipco.dev && /* can be unavailible! */ ++ bus->chipco.dev && /* can be unavailable! */ + bus->chipco.dev->id.revision >= 31) + return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM; + + return true; -+} + } --- a/drivers/ssb/ssb_private.h +++ b/drivers/ssb/ssb_private.h @@ -114,6 +114,46 @@ static inline int ssb_pcmcia_init(struct @@ -2373,7 +3161,14 @@ /* scan.c */ extern const char *ssb_core_name(u16 coreid); -@@ -136,19 +176,27 @@ extern const struct ssb_sprom *ssb_get_f +@@ -131,24 +171,33 @@ ssize_t ssb_attr_sprom_store(struct ssb_ + const char *buf, size_t count, + int (*sprom_check_crc)(const u16 *sprom, size_t size), + int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom)); +-extern const struct ssb_sprom *ssb_get_fallback_sprom(void); ++extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, ++ struct ssb_sprom *out); + /* core.c */ extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m); @@ -2404,7 +3199,7 @@ static inline int b43_pci_ssb_bridge_init(void) { return 0; -@@ -156,6 +204,6 @@ static inline int b43_pci_ssb_bridge_ini +@@ -156,6 +205,6 @@ static inline int b43_pci_ssb_bridge_ini static inline void b43_pci_ssb_bridge_exit(void) { } @@ -2424,12 +3219,14 @@ #define PCI_DEVICE_ID_TIGON3_5752M 0x1601 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -27,24 +27,58 @@ struct ssb_sprom { +@@ -27,24 +27,60 @@ struct ssb_sprom { u8 et1mdcport; /* MDIO for enet1 */ u8 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ - u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */ - u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */ ++ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ ++ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ + u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ + u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; @@ -2489,7 +3286,7 @@ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the -@@ -58,7 +92,7 @@ struct ssb_sprom { +@@ -58,14 +94,14 @@ struct ssb_sprom { } ghz5; /* 5GHz band */ } antenna_gain; @@ -2498,7 +3295,15 @@ }; /* Information about the PCB the circuitry is soldered on. */ -@@ -137,7 +171,7 @@ struct ssb_device { + struct ssb_boardinfo { + u16 vendor; + u16 type; +- u16 rev; ++ u8 rev; + }; + + +@@ -137,7 +173,7 @@ struct ssb_device { * is an optimization. */ const struct ssb_bus_ops *ops; @@ -2507,7 +3312,7 @@ struct ssb_bus *bus; struct ssb_device_id id; -@@ -208,6 +242,7 @@ enum ssb_bustype { +@@ -208,6 +244,7 @@ enum ssb_bustype { SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ @@ -2515,7 +3320,7 @@ }; /* board_vendor */ -@@ -238,20 +273,33 @@ struct ssb_bus { +@@ -238,20 +275,33 @@ struct ssb_bus { const struct ssb_bus_ops *ops; @@ -2557,15 +3362,17 @@ #ifdef CONFIG_SSB_SPROM /* Mutex to protect the SPROM writing. */ -@@ -261,6 +309,7 @@ struct ssb_bus { +@@ -260,7 +310,8 @@ struct ssb_bus { + /* ID information about the Chip. */ u16 chip_id; - u16 chip_rev; +- u16 chip_rev; ++ u8 chip_rev; + u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -306,6 +355,11 @@ struct ssb_bus { +@@ -306,6 +357,11 @@ struct ssb_bus { #endif /* DEBUG */ }; @@ -2577,7 +3384,7 @@ /* The initialization-invariants. */ struct ssb_init_invariants { /* Versioning information about the PCB. */ -@@ -336,9 +390,18 @@ extern int ssb_bus_pcmciabus_register(st +@@ -336,12 +392,23 @@ extern int ssb_bus_pcmciabus_register(st struct pcmcia_device *pcmcia_dev, unsigned long baseaddr); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -2595,7 +3402,21 @@ + /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ - extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom); +-extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom); ++extern int ssb_arch_register_fallback_sprom( ++ int (*sprom_callback)(struct ssb_bus *bus, ++ struct ssb_sprom *out)); + + /* Suspend a SSB bus. + * Call this from the parent bus suspend routine. */ +@@ -612,6 +679,7 @@ extern int ssb_bus_may_powerdown(struct + * Otherwise static always-on powercontrol will be used. */ + extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); + ++extern void ssb_commit_settings(struct ssb_bus *bus); + + /* Various helper functions */ + extern u32 ssb_admatch_base(u32 adm); --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h @@ -53,6 +53,7 @@ @@ -2606,7 +3427,39 @@ #define SSB_CHIPCO_CORECTL 0x0008 #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ -@@ -385,6 +386,7 @@ +@@ -122,6 +123,8 @@ + #define SSB_CHIPCO_FLASHDATA 0x0048 + #define SSB_CHIPCO_BCAST_ADDR 0x0050 + #define SSB_CHIPCO_BCAST_DATA 0x0054 ++#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */ ++#define SSB_CHIPCO_GPIOPULLDOWN 0x005C /* Rev >= 20 only */ + #define SSB_CHIPCO_GPIOIN 0x0060 + #define SSB_CHIPCO_GPIOOUT 0x0064 + #define SSB_CHIPCO_GPIOOUTEN 0x0068 +@@ -130,6 +133,9 @@ + #define SSB_CHIPCO_GPIOIRQ 0x0074 + #define SSB_CHIPCO_WATCHDOG 0x0080 + #define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */ ++#define SSB_CHIPCO_GPIOTIMER_OFFTIME 0x0000FFFF ++#define SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT 0 ++#define SSB_CHIPCO_GPIOTIMER_ONTIME 0xFFFF0000 + #define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16 + #define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */ + #define SSB_CHIPCO_CLOCK_N 0x0090 +@@ -188,8 +194,10 @@ + #define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */ + #define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ + #define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ +-#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */ +-#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */ ++#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00010000 /* ALP available */ ++#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00020000 /* HT available */ ++#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */ ++#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */ + #define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ + #define SSB_CHIPCO_UART0_DATA 0x0300 + #define SSB_CHIPCO_UART0_IMR 0x0304 +@@ -385,6 +393,7 @@ /** Chip specific Chip-Status register contents. */ @@ -2614,7 +3467,7 @@ #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003 #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ #define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ -@@ -398,6 +400,18 @@ +@@ -398,6 +407,18 @@ #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4 #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */ @@ -2633,7 +3486,7 @@ /** Clockcontrol masks and values **/ -@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu { +@@ -564,6 +585,7 @@ struct ssb_chipcommon_pmu { struct ssb_chipcommon { struct ssb_device *dev; u32 capabilities; @@ -2641,7 +3494,7 @@ /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; struct ssb_chipcommon_pmu pmu; -@@ -629,5 +644,15 @@ extern int ssb_chipco_serial_init(struct +@@ -629,5 +651,15 @@ extern int ssb_chipco_serial_init(struct /* PMU support */ extern void ssb_pmu_init(struct ssb_chipcommon *cc); @@ -2668,6 +3521,15 @@ #define SSB_INTVEC 0x0F94 /* SB Interrupt Mask */ #define SSB_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */ #define SSB_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */ +@@ -95,7 +97,7 @@ + #define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */ + #define SSB_TMSLOW 0x0F98 /* SB Target State Low */ + #define SSB_TMSLOW_RESET 0x00000001 /* Reset */ +-#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */ ++#define SSB_TMSLOW_REJECT 0x00000002 /* Reject (Standard Backplane) */ + #define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */ + #define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */ + #define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */ @@ -162,7 +164,7 @@ /* SPROM shadow area. If not otherwise noted, fields are |