diff options
Diffstat (limited to 'target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h')
-rw-r--r-- | target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h | 168 |
1 files changed, 0 insertions, 168 deletions
diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h deleted file mode 100644 index d8f1cdd9f9..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h +++ /dev/null @@ -1,168 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCPEXH -#define __INCPEXH - -#include "mvCommon.h" -#include "mvOs.h" -#include "pex/mvPexRegs.h" -#include "ctrlEnv/mvCtrlEnvSpec.h" - - - -/* NOTE not supported in this driver:*/ - - -/* defines */ -/* The number of supported PEX interfaces depend on Marvell controller */ -/* device number. This device number ID is located on the PEX unit */ -/* configuration header. This creates a loop where calling PEX */ -/* configuration read/write routine results a call to get PEX configuration */ -/* information etc. This macro defines a default PEX interface. This PEX */ -/* interface is sure to exist. */ -#define PEX_DEFAULT_IF 0 - - -/* typedefs */ -/* The Marvell controller supports both root complex and end point devices */ -/* This enumeration describes the PEX type. */ -typedef enum _mvPexType -{ - MV_PEX_ROOT_COMPLEX, /* root complex device */ - MV_PEX_END_POINT /* end point device */ -}MV_PEX_TYPE; - -typedef enum _mvPexWidth -{ - MV_PEX_WITDH_X1 = 1, - MV_PEX_WITDH_X2, - MV_PEX_WITDH_X3, - MV_PEX_WITDH_X4, - MV_PEX_WITDH_INVALID -}MV_PEX_WIDTH; - -/* PEX Bar attributes */ -typedef struct _mvPexMode -{ - MV_PEX_TYPE pexType; - MV_PEX_WIDTH pexWidth; - MV_BOOL pexLinkUp; -}MV_PEX_MODE; - - - -/* Global Functions prototypes */ -/* mvPexInit - Initialize PEX interfaces*/ -MV_STATUS mvPexHalInit(MV_U32 pexIf, MV_PEX_TYPE pexType); - -/* mvPexModeGet - Get Pex If mode */ -MV_U32 mvPexModeGet(MV_U32 pexIf,MV_PEX_MODE *pexMode); - -/* mvPexConfigRead - Read from configuration space */ -MV_U32 mvPexConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, - MV_U32 func,MV_U32 regOff); - -/* mvPexConfigWrite - Write to configuration space */ -MV_STATUS mvPexConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, - MV_U32 func, MV_U32 regOff, MV_U32 data); - -/* mvPexMasterEnable - Enable/disale PEX interface master transactions.*/ -MV_STATUS mvPexMasterEnable(MV_U32 pexIf, MV_BOOL enable); - -/* mvPexSlaveEnable - Enable/disale PEX interface slave transactions.*/ -MV_STATUS mvPexSlaveEnable(MV_U32 pexIf, MV_U32 bus,MV_U32 dev, MV_BOOL enable); - -/* mvPexLocalBusNumSet - Set PEX interface local bus number.*/ -MV_STATUS mvPexLocalBusNumSet(MV_U32 pexIf, MV_U32 busNum); - -/* mvPexLocalBusNumGet - Get PEX interface local bus number.*/ -MV_U32 mvPexLocalBusNumGet(MV_U32 pexIf); - -/* mvPexLocalDevNumSet - Set PEX interface local device number.*/ -MV_STATUS mvPexLocalDevNumSet(MV_U32 pexIf, MV_U32 devNum); - -/* mvPexLocalDevNumGet - Get PEX interface local device number.*/ -MV_U32 mvPexLocalDevNumGet(MV_U32 pexIf); -/* mvPexForceX1 - Force PEX interface to X1 mode. */ -MV_U32 mvPexForceX1(MV_U32 pexIf); - -/* mvPexIsPowerUp - Is PEX interface Power up? */ -MV_BOOL mvPexIsPowerUp(MV_U32 pexIf); - -/* mvPexPowerDown - Power Down */ -MV_VOID mvPexPowerDown(MV_U32 pexIf); - -/* mvPexPowerUp - Power Up */ -MV_VOID mvPexPowerUp(MV_U32 pexIf); - -/* mvPexPhyRegRead - Pex phy read */ -MV_VOID mvPexPhyRegRead(MV_U32 pexIf, MV_U32 regOffset, MV_U16 *value); - -/* mvPexPhyRegWrite - Pex phy write */ -MV_VOID mvPexPhyRegWrite(MV_U32 pexIf, MV_U32 regOffset, MV_U16 value); - -MV_STATUS mvPexActiveStateLinkPMEnable(MV_U32 pexIf, MV_BOOL enable); - -#endif /* #ifndef __INCPEXH */ |