summaryrefslogtreecommitdiff
path: root/target/linux/cns3xxx/patches/050-cns3xxx_i2c_controller.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/cns3xxx/patches/050-cns3xxx_i2c_controller.patch')
-rw-r--r--target/linux/cns3xxx/patches/050-cns3xxx_i2c_controller.patch421
1 files changed, 0 insertions, 421 deletions
diff --git a/target/linux/cns3xxx/patches/050-cns3xxx_i2c_controller.patch b/target/linux/cns3xxx/patches/050-cns3xxx_i2c_controller.patch
deleted file mode 100644
index febbc1ecba..0000000000
--- a/target/linux/cns3xxx/patches/050-cns3xxx_i2c_controller.patch
+++ /dev/null
@@ -1,421 +0,0 @@
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -327,6 +327,18 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
- help
- The unit of the TWI clock is kHz.
-
-+config I2C_CNS3XXX
-+ tristate "Cavium CNS3xxx I2C driver"
-+ depends on ARCH_CNS3XXX
-+ help
-+ Support for Cavium CNS3xxx I2C controller driver.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called i2c-cns3xxx.
-+
-+ Please note that this driver might be needed to bring up other
-+ devices such as Cavium CNS3xxx Ethernet.
-+
- config I2C_CPM
- tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
- depends on (CPM1 || CPM2) && OF_I2C
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -80,6 +80,7 @@ obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor
- obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
- obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
- obj-$(CONFIG_I2C_STUB) += i2c-stub.o
-+obj-$(CONFIG_I2C_CNS3XXX) += i2c-cns3xxx.o
- obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
- obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
-
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-cns3xxx.c
-@@ -0,0 +1,387 @@
-+/*
-+ * Cavium CNS3xxx I2C Host Controller
-+ *
-+ * Copyright 2010 Cavium Network
-+ * Copyright 2011 Gateworks Corporation
-+ * Chris Lang <clang@gateworks.com>
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <asm/io.h>
-+#include <linux/wait.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/i2c.h>
-+#include <linux/slab.h>
-+#include <mach/pm.h>
-+#include <mach/cns3xxx.h>
-+
-+/*
-+ * We need the memory map
-+ */
-+
-+
-+#define MISC_MEM_MAP_VALUE(reg_offset) (*((uint32_t volatile *)(CNS3XXX_MISC_BASE_VIRT + reg_offset)))
-+#define MISC_IOCDB_CTRL MISC_MEM_MAP_VALUE(0x020)
-+
-+#define I2C_MEM_MAP_ADDR(x) (CNS3XXX_SSP_BASE_VIRT + x)
-+#define I2C_MEM_MAP_VALUE(x) (*((unsigned int volatile*)I2C_MEM_MAP_ADDR(x)))
-+
-+#define I2C_CONTROLLER_REG I2C_MEM_MAP_VALUE(0x20)
-+#define I2C_TIME_OUT_REG I2C_MEM_MAP_VALUE(0x24)
-+#define I2C_SLAVE_ADDRESS_REG I2C_MEM_MAP_VALUE(0x28)
-+#define I2C_WRITE_DATA_REG I2C_MEM_MAP_VALUE(0x2C)
-+#define I2C_READ_DATA_REG I2C_MEM_MAP_VALUE(0x30)
-+#define I2C_INTERRUPT_STATUS_REG I2C_MEM_MAP_VALUE(0x34)
-+#define I2C_INTERRUPT_ENABLE_REG I2C_MEM_MAP_VALUE(0x38)
-+#define I2C_TWI_OUT_DLY_REG I2C_MEM_MAP_VALUE(0x3C)
-+
-+#define I2C_BUS_ERROR_FLAG (0x1)
-+#define I2C_ACTION_DONE_FLAG (0x2)
-+
-+#define CNS3xxx_I2C_ENABLE() (I2C_CONTROLLER_REG) |= ((unsigned int)0x1 << 31)
-+#define CNS3xxx_I2C_DISABLE() (I2C_CONTROLLER_REG) &= ~((unsigned int)0x1 << 31)
-+#define CNS3xxx_I2C_ENABLE_INTR() (I2C_INTERRUPT_ENABLE_REG) |= 0x03
-+#define CNS3xxx_I2C_DISABLE_INTR() (I2C_INTERRUPT_ENABLE_REG) &= 0xfc
-+
-+#define TWI_TIMEOUT (10*HZ)
-+#define I2C_100KHZ 100000
-+#define I2C_200KHZ 200000
-+#define I2C_300KHZ 300000
-+#define I2C_400KHZ 400000
-+
-+#define CNS3xxx_I2C_CLK I2C_100KHZ
-+
-+#define STATE_DONE 1
-+#define STATE_ERROR 2
-+
-+struct cns3xxx_i2c {
-+ void __iomem *base;
-+ wait_queue_head_t wait;
-+ struct i2c_adapter adap;
-+ struct i2c_msg *msg;
-+ int state; /* see STATE_ */
-+ int rd_wr_len;
-+ u8 *buf;
-+};
-+
-+static u32 cns3xxx_i2c_func(struct i2c_adapter *adap)
-+{
-+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static int
-+cns3xxx_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg)
-+{
-+ struct cns3xxx_i2c *i2c = i2c_get_adapdata(adap);
-+ int i, j;
-+ u8 buf[1] = { 0 };
-+
-+ if (msg->len == 0) {
-+ /*
-+ * We are probably doing a probe for a device here,
-+ * so set the length to one, and data to 0
-+ */
-+ msg->len = 1;
-+ i2c->buf = buf;
-+ } else {
-+ i2c->buf = msg->buf;
-+ }
-+
-+ if (msg->flags & I2C_M_TEN) {
-+ printk
-+ ("%s:%d: Presently the driver does not handle extended addressing\n",
-+ __FUNCTION__, __LINE__);
-+ return -EINVAL;
-+ }
-+ i2c->msg = msg;
-+
-+ for (i = 0; i < msg->len; i++) {
-+ if (msg->len - i >= 4)
-+ i2c->rd_wr_len = 3;
-+ else
-+ i2c->rd_wr_len = msg->len - i - 1;
-+
-+ // Set Data Width and TWI_EN
-+ I2C_CONTROLLER_REG = 0x80000000 | (i2c->rd_wr_len << 2) | (i2c->rd_wr_len);
-+
-+ // Clear Write Reg
-+ I2C_WRITE_DATA_REG = 0;
-+
-+ // Set the slave address
-+ I2C_SLAVE_ADDRESS_REG = (msg->addr << 1);
-+
-+ // Are we Writing
-+ if (!(msg->flags & I2C_M_RD)) {
-+ I2C_CONTROLLER_REG |= (1 << 4);
-+ if (i != 0) {
-+ /*
-+ * We need to set the address in the first byte.
-+ * The base address is going to be in buf[0] and then
-+ * it needs to be incremented by i - 1.
-+ */
-+ i2c->buf--;
-+ *i2c->buf = buf[0] + i - 1;
-+
-+ if (i2c->rd_wr_len < 3) {
-+ i += i2c->rd_wr_len;
-+ i2c->rd_wr_len++;
-+ I2C_CONTROLLER_REG = 0x80000000 | (1 << 4) | (i2c->rd_wr_len << 2) | (i2c->rd_wr_len);
-+ } else {
-+ i += i2c->rd_wr_len - 1;
-+ }
-+ } else {
-+ i += i2c->rd_wr_len;
-+ buf[0] = *i2c->buf;
-+ }
-+ for (j = 0; j <= i2c->rd_wr_len; j++) {
-+ I2C_WRITE_DATA_REG |= ((*i2c->buf++) << (8 * j));
-+ }
-+ } else {
-+ i += i2c->rd_wr_len;
-+ }
-+
-+ // Start the Transfer
-+ i2c->state = 0; // Clear out the State
-+ I2C_CONTROLLER_REG |= (1 << 6);
-+
-+ if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
-+ (i2c->state == STATE_DONE), TWI_TIMEOUT)) {
-+ if (i2c->state == STATE_ERROR) {
-+ return -EIO;
-+ }
-+ } else {
-+ return -ETIMEDOUT;
-+ }
-+ }
-+ return 0;
-+}
-+
-+static int
-+cns3xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
-+{
-+ int i;
-+ int ret;
-+ for (i = 0; i < num; i++)
-+ {
-+ ret = cns3xxx_i2c_xfer_msg(adap, &msgs[i]);
-+ if (ret < 0) {
-+ return ret;
-+ }
-+ }
-+ return num;
-+}
-+
-+
-+static struct i2c_algorithm cns3xxx_i2c_algo = {
-+ .master_xfer = cns3xxx_i2c_xfer,
-+ .functionality = cns3xxx_i2c_func,
-+};
-+
-+static struct i2c_adapter cns3xxx_i2c_adapter = {
-+ .owner = THIS_MODULE,
-+ .algo = &cns3xxx_i2c_algo,
-+ .algo_data = NULL,
-+ .nr = 0,
-+ .name = "CNS3xxx I2C 0",
-+ .retries = 5,
-+};
-+
-+static void cns3xxx_i2c_adapter_init(struct cns3xxx_i2c *i2c)
-+{
-+ cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
-+ cns3xxx_pwr_power_up(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
-+ cns3xxx_pwr_soft_rst(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
-+
-+ /* Disable the I2C */
-+ I2C_CONTROLLER_REG = 0; /* Disabled the I2C */
-+
-+ //enable SCL and SDA which share pin with GPIOB_PIN_EN(0x18)
-+ //GPIOB[12]: SCL
-+ //GPIOB[13]: SDA
-+ (*(u32*)(CNS3XXX_MISC_BASE_VIRT+0x18)) |= ((1<<12)|(1<<13));
-+
-+ MISC_IOCDB_CTRL &= ~0x300;
-+ MISC_IOCDB_CTRL |= 0x300; //21mA...
-+
-+ /* Check the Reg Dump when testing */
-+ I2C_TIME_OUT_REG =
-+ ((((((cns3xxx_cpu_clock()*(1000000/8)) / (2 * CNS3xxx_I2C_CLK)) -
-+ 1) & 0x3FF) << 8) | (1 << 7) | 0x7F);
-+ I2C_TWI_OUT_DLY_REG |= 0x3;
-+
-+ /* Enable The Interrupt */
-+ CNS3xxx_I2C_ENABLE_INTR();
-+
-+ /* Clear Interrupt Status (0x2 | 0x1) */
-+ I2C_INTERRUPT_STATUS_REG |= (I2C_ACTION_DONE_FLAG | I2C_BUS_ERROR_FLAG);
-+
-+ /* Enable the I2C Controller */
-+ CNS3xxx_I2C_ENABLE();
-+}
-+
-+static irqreturn_t cns3xxx_i2c_isr(int irq, void *dev_id)
-+{
-+ struct cns3xxx_i2c *i2c = dev_id;
-+ int i;
-+ uint32_t stat = I2C_INTERRUPT_STATUS_REG;
-+
-+ /* Clear Interrupt */
-+ I2C_INTERRUPT_STATUS_REG |= 0x1;
-+
-+ if (stat & I2C_BUS_ERROR_FLAG) {
-+ i2c->state = STATE_ERROR;
-+ } else {
-+ if (i2c->msg->flags & I2C_M_RD) {
-+ for (i = 0; i <= i2c->rd_wr_len; i++)
-+ {
-+ *i2c->buf++ = ((I2C_READ_DATA_REG >> (8 * i)) & 0xff);
-+ }
-+ }
-+ i2c->state = STATE_DONE;
-+ }
-+ wake_up(&i2c->wait);
-+ return IRQ_HANDLED;
-+}
-+
-+static int __devinit cns3xxx_i2c_probe(struct platform_device *pdev)
-+{
-+ struct cns3xxx_i2c *i2c;
-+ struct resource *res, *res2;
-+ int ret;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ printk("%s: IORESOURCE_MEM not defined \n", __FUNCTION__);
-+ return -ENODEV;
-+ }
-+
-+ res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+ if (!res2) {
-+ printk("%s: IORESOURCE_IRQ not defined \n", __FUNCTION__);
-+ return -ENODEV;
-+ }
-+
-+ i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
-+ if (!i2c)
-+ return -ENOMEM;
-+
-+ if (!request_mem_region(res->start, res->end - res->start + 1,
-+ pdev->name)) {
-+ dev_err(&pdev->dev, "Memory region busy\n");
-+ ret = -EBUSY;
-+ goto request_mem_failed;
-+ }
-+
-+ i2c->base = ioremap(res->start, res->end - res->start + 1);
-+ if (!i2c->base) {
-+ dev_err(&pdev->dev, "Unable to map registers\n");
-+ ret = -EIO;
-+ goto map_failed;
-+ }
-+
-+ cns3xxx_i2c_adapter_init(i2c);
-+
-+ init_waitqueue_head(&i2c->wait);
-+ ret = request_irq(res2->start, cns3xxx_i2c_isr, 0, pdev->name, i2c);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Cannot claim IRQ\n");
-+ goto request_irq_failed;
-+ }
-+
-+ platform_set_drvdata(pdev, i2c);
-+ i2c->adap = cns3xxx_i2c_adapter;
-+ i2c_set_adapdata(&i2c->adap, i2c);
-+ i2c->adap.dev.parent = &pdev->dev;
-+
-+ /* add i2c adapter to i2c tree */
-+ ret = i2c_add_numbered_adapter(&i2c->adap);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Failed to add adapter\n");
-+ goto add_adapter_failed;
-+ }
-+
-+ return 0;
-+
-+ add_adapter_failed:
-+ free_irq(res2->start, i2c);
-+ request_irq_failed:
-+ iounmap(i2c->base);
-+ map_failed:
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ request_mem_failed:
-+ kfree(i2c);
-+
-+ return ret;
-+}
-+
-+static int __devexit cns3xxx_i2c_remove(struct platform_device *pdev)
-+{
-+ struct cns3xxx_i2c *i2c = platform_get_drvdata(pdev);
-+ struct resource *res;
-+
-+ /* disable i2c logic */
-+ CNS3xxx_I2C_DISABLE_INTR();
-+ CNS3xxx_I2C_DISABLE();
-+ /* remove adapter & data */
-+ i2c_del_adapter(&i2c->adap);
-+ platform_set_drvdata(pdev, NULL);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+ if (res)
-+ free_irq(res->start, i2c);
-+
-+ iounmap(i2c->base);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (res)
-+ release_mem_region(res->start, res->end - res->start + 1);
-+
-+ kfree(i2c);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+#warning "CONFIG_PM defined: suspend and resume not implemented"
-+#define cns3xxx_i2c_suspend NULL
-+#define cns3xxx_i2c_resume NULL
-+#else
-+#define cns3xxx_i2c_suspend NULL
-+#define cns3xxx_i2c_resume NULL
-+#endif
-+
-+static struct platform_driver cns3xxx_i2c_driver = {
-+ .probe = cns3xxx_i2c_probe,
-+ .remove = cns3xxx_i2c_remove,
-+ .suspend = cns3xxx_i2c_suspend,
-+ .resume = cns3xxx_i2c_resume,
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "cns3xxx-i2c",
-+ },
-+};
-+
-+static int __init cns3xxx_i2c_init(void)
-+{
-+ return platform_driver_register(&cns3xxx_i2c_driver);
-+}
-+
-+static void __exit cns3xxx_i2c_exit(void)
-+{
-+ platform_driver_unregister(&cns3xxx_i2c_driver);
-+}
-+
-+module_init(cns3xxx_i2c_init);
-+module_exit(cns3xxx_i2c_exit);
-+
-+MODULE_AUTHOR("Cavium Networks");
-+MODULE_DESCRIPTION("Cavium CNS3XXX I2C Controller");
-+MODULE_LICENSE("GPL");