1 files changed, 0 insertions, 129 deletions
diff --git a/target/linux/brcm63xx/patches-2.6.38/447-board_gw6200_gw6000.patch b/target/linux/brcm63xx/patches-2.6.38/447-board_gw6200_gw6000.patch
deleted file mode 100644
index c06fda942c..0000000000
--- a/target/linux/brcm63xx/patches-2.6.38/447-board_gw6200_gw6000.patch
+++ /dev/null
@@ -1,129 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -432,6 +432,117 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_gw6200 = {
-+	.name				= "GW6200",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0 = 1,
-+
-+	.has_dsp			= 1,
-+		.dsp = {
-+        .gpio_rst		= 8, /* FIXME: What is real GPIO here? */
-+		.gpio_int		= 34,
-+		.ext_irq		= 2,
-+		.cs			= 2,
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "line1",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "line2",
-+			.gpio		= 5,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "line3",
-+			.gpio		= 6,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tel",
-+			.gpio		= 7,
-+			.active_low	= 1,
-+		},
-+		{
-+		    .name		= "ethernet",
-+		    .gpio		= 35,
-+		    .active_low	= 1,
-+		}, 
-+	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 36,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_gw6000 = {
-+	.name				= "GW6000",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0 = 1,
-+
-+	.has_dsp			= 1,
-+	.dsp = {
-+		.gpio_rst		= 6,
-+		.gpio_int		= 34,
-+		.ext_irq		= 2,
-+		.cs			= 2,
-+	},
-+
-+	/* GW6000 has no GPIO-controlled leds */
-+
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 36,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
-+
-+
- static struct board_info __initdata board_FAST2404 = {
- 	.name				= "F@ST2404",
- 	.expected_cpu_id		= 0x6348,
-@@ -1540,6 +1651,8 @@ static const struct board_info __initdat
- #ifdef CONFIG_BCM63XX_CPU_6348
- 	&board_96348r,
- 	&board_96348gw,
-+	&board_gw6000,
-+	&board_gw6200,
- 	&board_96348gw_10,
- 	&board_96348gw_11,
- 	&board_FAST2404,