diff options
Diffstat (limited to 'target/linux/brcm47xx/patches-2.6.33')
4 files changed, 4 insertions, 91 deletions
diff --git a/target/linux/brcm47xx/patches-2.6.33/180-ssb_extif_interrupt.patch b/target/linux/brcm47xx/patches-2.6.33/180-ssb_extif_interrupt.patch deleted file mode 100644 index d89531cda1..0000000000 --- a/target/linux/brcm47xx/patches-2.6.33/180-ssb_extif_interrupt.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 83e34f03ee9b86b49bde4707a1fe03a1837e29be Mon Sep 17 00:00:00 2001 -From: Jochen Friedrich <jochen@scram.de> -Date: Wed, 3 Feb 2010 21:28:11 +0100 -Subject: [PATCH 1/1] ssb: fix interrupt assignment - -Explicitely enable shared interrupt 2 for any core that didn't get a dedicated IRQ -anymore (fallthrough case) and for EXTIF cores to make gpio interrupts work. -Also remove a bogus comment. - -Signed-off-by: Jochen Friedrich <jochen@scram.de> -Signed-off-by: John W. Linville <linville@tuxdriver.com> ---- - drivers/ssb/driver_mipscore.c | 5 ++++- - 1 files changed, 4 insertions(+), 1 deletions(-) - ---- a/drivers/ssb/driver_mipscore.c -+++ b/drivers/ssb/driver_mipscore.c -@@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco - set_irq(dev, irq++); - } - break; -- /* fallthrough */ - case SSB_DEV_PCI: - case SSB_DEV_ETHERNET: - case SSB_DEV_ETHERNET_GBIT: -@@ -281,6 +280,10 @@ void ssb_mipscore_init(struct ssb_mipsco - set_irq(dev, irq++); - break; - } -+ /* fallthrough */ -+ case SSB_DEV_EXTIF: -+ set_irq(dev, 0); -+ break; - } - } - ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); diff --git a/target/linux/brcm47xx/patches-2.6.33/220-bcm5354.patch b/target/linux/brcm47xx/patches-2.6.33/220-bcm5354.patch index f396ca745a..a6ab0292ba 100644 --- a/target/linux/brcm47xx/patches-2.6.33/220-bcm5354.patch +++ b/target/linux/brcm47xx/patches-2.6.33/220-bcm5354.patch @@ -1,6 +1,6 @@ --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c -@@ -258,6 +258,8 @@ void ssb_chipco_resume(struct ssb_chipco +@@ -260,6 +260,8 @@ void ssb_chipco_resume(struct ssb_chipco void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc, u32 *plltype, u32 *n, u32 *m) { @@ -9,7 +9,7 @@ *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N); *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); switch (*plltype) { -@@ -281,6 +283,8 @@ void ssb_chipco_get_clockcpu(struct ssb_ +@@ -283,6 +285,8 @@ void ssb_chipco_get_clockcpu(struct ssb_ void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc, u32 *plltype, u32 *n, u32 *m) { @@ -31,7 +31,7 @@ } --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c -@@ -1069,6 +1069,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus) +@@ -1072,6 +1072,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus) if (bus->chip_id == 0x5365) { rate = 100000000; diff --git a/target/linux/brcm47xx/patches-2.6.33/930-bcm47xx-pci-iomem.patch b/target/linux/brcm47xx/patches-2.6.33/930-bcm47xx-pci-iomem.patch deleted file mode 100644 index 4f47a3c52d..0000000000 --- a/target/linux/brcm47xx/patches-2.6.33/930-bcm47xx-pci-iomem.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -246,20 +246,12 @@ static struct pci_controller ssb_pcicore - .pci_ops = &ssb_pcicore_pciops, - .io_resource = &ssb_pcicore_io_resource, - .mem_resource = &ssb_pcicore_mem_resource, -- .mem_offset = 0x24000000, - }; - --static u32 ssb_pcicore_pcibus_iobase = 0x100; --static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; -- - /* This function is called when doing a pci_enable_device(). - * We must first check if the device is a device on the PCI-core bridge. */ - int ssb_pcicore_plat_dev_init(struct pci_dev *d) - { -- struct resource *res; -- int pos, size; -- u32 *base; -- - if (d->bus->ops != &ssb_pcicore_pciops) { - /* This is not a device on the PCI-core bridge. */ - return -ENODEV; -@@ -268,27 +260,6 @@ int ssb_pcicore_plat_dev_init(struct pci - ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", - pci_name(d)); - -- /* Fix up resource bases */ -- for (pos = 0; pos < 6; pos++) { -- res = &d->resource[pos]; -- if (res->flags & IORESOURCE_IO) -- base = &ssb_pcicore_pcibus_iobase; -- else -- base = &ssb_pcicore_pcibus_membase; -- res->flags |= IORESOURCE_PCI_FIXED; -- if (res->end) { -- size = res->end - res->start + 1; -- if (*base & (size - 1)) -- *base = (*base + size) & ~(size - 1); -- res->start = *base; -- res->end = res->start + size - 1; -- *base += size; -- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); -- } -- /* Fix up PCI bridge BAR0 only */ -- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) -- break; -- } - /* Fix up interrupt lines */ - d->irq = ssb_mips_irq(extpci_core->dev) + 2; - pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); diff --git a/target/linux/brcm47xx/patches-2.6.33/951-brcm4716-defines.patch b/target/linux/brcm47xx/patches-2.6.33/951-brcm4716-defines.patch index 5cc51100f8..482dbad02e 100644 --- a/target/linux/brcm47xx/patches-2.6.33/951-brcm4716-defines.patch +++ b/target/linux/brcm47xx/patches-2.6.33/951-brcm4716-defines.patch @@ -60,7 +60,7 @@ /* Enumeration space constants */ #define SSB_CORE_SIZE 0x1000 /* Size of a core MMIO area */ -@@ -452,5 +454,41 @@ enum { +@@ -453,5 +455,41 @@ enum { #define SSB_ADM_BASE2 0xFFFF0000 /* Type2 base address for the core */ #define SSB_ADM_BASE2_SHIFT 16 |