summaryrefslogtreecommitdiff
path: root/target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch')
-rw-r--r--target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch90
1 files changed, 90 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch b/target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch
new file mode 100644
index 0000000000..2e0c862bec
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch
@@ -0,0 +1,90 @@
+Index: linux-2.6.23.16/drivers/ssb/driver_chipcommon.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/ssb/driver_chipcommon.c 2008-02-18 21:38:58.000000000 +0100
++++ linux-2.6.23.16/drivers/ssb/driver_chipcommon.c 2008-02-18 21:39:00.000000000 +0100
+@@ -365,6 +365,7 @@ int ssb_chipco_serial_init(struct ssb_ch
+ unsigned int irq;
+ u32 baud_base, div;
+ u32 i, n;
++ unsigned int ccrev = cc->dev->id.revision;
+
+ plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
+ irq = ssb_mips_irq(cc->dev);
+@@ -376,14 +377,39 @@ int ssb_chipco_serial_init(struct ssb_ch
+ chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
+ div = 1;
+ } else {
+- if (cc->dev->id.revision >= 11) {
++ if (ccrev == 20) {
++ /* BCM5354 uses constant 25MHz clock */
++ baud_base = 25000000;
++ div = 48;
++ /* Set the override bit so we don't divide it */
++ chipco_write32(cc, SSB_CHIPCO_CORECTL,
++ chipco_read32(cc, SSB_CHIPCO_CORECTL)
++ | SSB_CHIPCO_CORECTL_UARTCLK0);
++ } else if ((ccrev >= 11) && (ccrev != 15)) {
+ /* Fixed ALP clock */
+ baud_base = 20000000;
++ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
++ /* FIXME: baud_base is different for devices with a PMU */
++ SSB_WARN_ON(1);
++ }
+ div = 1;
++ if (ccrev >= 21) {
++ /* Turn off UART clock before switching clocksource. */
++ chipco_write32(cc, SSB_CHIPCO_CORECTL,
++ chipco_read32(cc, SSB_CHIPCO_CORECTL)
++ & ~SSB_CHIPCO_CORECTL_UARTCLKEN);
++ }
+ /* Set the override bit so we don't divide it */
+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
+- SSB_CHIPCO_CORECTL_UARTCLK0);
+- } else if (cc->dev->id.revision >= 3) {
++ chipco_read32(cc, SSB_CHIPCO_CORECTL)
++ | SSB_CHIPCO_CORECTL_UARTCLK0);
++ if (ccrev >= 21) {
++ /* Re-enable the UART clock. */
++ chipco_write32(cc, SSB_CHIPCO_CORECTL,
++ chipco_read32(cc, SSB_CHIPCO_CORECTL)
++ | SSB_CHIPCO_CORECTL_UARTCLKEN);
++ }
++ } else if (ccrev >= 3) {
+ /* Internal backplane clock */
+ baud_base = ssb_clockspeed(bus);
+ div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
+@@ -395,7 +421,7 @@ int ssb_chipco_serial_init(struct ssb_ch
+ }
+
+ /* Clock source depends on strapping if UartClkOverride is unset */
+- if ((cc->dev->id.revision > 0) &&
++ if ((ccrev > 0) &&
+ !(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
+ if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
+ SSB_CHIPCO_CAP_UARTCLK_INT) {
+@@ -417,7 +443,7 @@ int ssb_chipco_serial_init(struct ssb_ch
+ cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
+ uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
+ /* Offset changed at after rev 0 */
+- if (cc->dev->id.revision == 0)
++ if (ccrev == 0)
+ uart_regs += (i * 8);
+ else
+ uart_regs += (i * 256);
+Index: linux-2.6.23.16/include/linux/ssb/ssb_driver_chipcommon.h
+===================================================================
+--- linux-2.6.23.16.orig/include/linux/ssb/ssb_driver_chipcommon.h 2008-02-18 21:38:58.000000000 +0100
++++ linux-2.6.23.16/include/linux/ssb/ssb_driver_chipcommon.h 2008-02-18 21:39:00.000000000 +0100
+@@ -51,9 +51,12 @@
+ #define SSB_CHIPCO_CAP_JTAGM 0x00400000 /* JTAG master present */
+ #define SSB_CHIPCO_CAP_BROM 0x00800000 /* Internal boot ROM active */
+ #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */
++#define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
++#define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
+ #define SSB_CHIPCO_CORECTL 0x0008
+ #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
+ #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
++#define SSB_CHIPCO_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */
+ #define SSB_CHIPCO_BIST 0x000C
+ #define SSB_CHIPCO_OTPS 0x0010 /* OTP status */
+ #define SSB_CHIPCO_OTPS_PROGFAIL 0x80000000