diff options
Diffstat (limited to 'target/linux/brcm-2.4/base-files/etc/init.d/netconfig')
| -rwxr-xr-x | target/linux/brcm-2.4/base-files/etc/init.d/netconfig | 145 |
1 files changed, 0 insertions, 145 deletions
diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig deleted file mode 100755 index 4cc23d233b..0000000000 --- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig +++ /dev/null @@ -1,145 +0,0 @@ -#!/bin/sh /etc/rc.common -# Copyright (C) 2006 OpenWrt.org - -START=05 - -start() { - [ -e /etc/config/network ] && exit 0 - - mkdir -p /etc/config - - ( - if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then - # WGT634u - echo boardtype=wgt634u - else - strings /dev/mtdblock/3 - fi - ) | awk ' - function p(cfgname, name) { - if (c[name] != "") print " option " cfgname " \"" c[name] "\"" - } - - function macinc(mac, maca, i, result) { - split(mac, maca, ":") - for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i] - if (++maca[6] > 0xff) { - maca[5]++ - maca[6] = 0 - } - for (i = 1; i <= 6; i++) { - if (i != 1) result = result ":" - result = result sprintf("%02x", maca[i]) - } - return result - } - - BEGIN { - FS="=" - c["lan_ifname"]="eth0.0" - c["wan_ifname"]="eth0.1" - c["vlan0ports"]="1 2 3 4 5*" - c["vlan1ports"]="0 5" - getline < "/proc/diag/model" - model=$0 - for (i = 0; i < 6; i++) { - if (mac_check != "") mac_check = mac_check ":" - mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]" - } - } - - ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) { - nvram[$1] = $2 - } - - END { - if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) { - c["wan_ifname"] = "" - c["lan_ifname"] = "eth1" - } - if (model == "ASUS WL-500g") { - c["wan_ifname"] = "eth1" - c["lan_ifname"] = "eth0" - } - if (nvram["boardtype"] == "bcm94710r4") { - # Toshiba WRC-1000 - c["lan_ifname"] = "eth0" - c["wan_ifname"] = "eth1" - } - if (nvram["boardtype"] == "wgt634u") { - c["vlan0ports"] = "0 1 2 3 5*" - c["vlan1ports"] = "4 5" - } - if (nvram["boardtype"] == "0x0467") { - c["vlan0ports"] = "0 1 2 3 5*" - c["vlan1ports"] = "4 5" - } - if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) { - if (nvram["boardnum"] == "45") { - # WL-500gP - c["vlan0ports"] = "1 2 3 4 5*" - c["vlan1ports"] = "0 5" - } else { - # Generic BCM94704 - c["vlan0ports"] = "0 1 2 3 4 5u" - c["vlan1ports"] = "" - c["lan_ifname"] = "eth0" - c["wan_ifname"] = "eth1" - - # MAC addresses on 4704 tend to be screwed up. Add a workaround here - if (nvram["et0macaddr"] ~ mac_check) { - c["lan_macaddr"] = nvram["et0macaddr"] - c["wan_macaddr"] = macinc(c["lan_macaddr"]) - } - } - } - - # WAP54G - if ((nvram["boardnum"] == "2") || \ - (nvram["boardnum"] == "1024")) { - c["lan_ifname"]="eth0" - c["wan_ifname"]="" - } - - # ASUS WL-700gE - # These are actually same as defaults above. For some reason this script applies - # Generic BCM94704 settings instead so we revert to proper settings here. - # Hopefully someone will fix this properly soon. - if (model == "ASUS WL-700gE") { - c["lan_ifname"]="eth0.0" - c["wan_ifname"]="eth0.1" - c["vlan0ports"]="1 2 3 4 5*" - c["vlan1ports"]="0 5" - } - - print "#### VLAN configuration " - print "config switch eth0" - p("vlan0", "vlan0ports") - p("vlan1", "vlan1ports") - print "" - print "" - print "#### Loopback configuration" - print "config interface loopback" - print " option ifname \"lo\"" - print " option proto static" - print " option ipaddr 127.0.0.1" - print " option netmask 255.0.0.0" - print "" - print "" - print "#### LAN configuration" - print "config interface lan" - print " option type bridge" - p("ifname", "lan_ifname") - p("macaddr", "lan_macaddr") - print " option proto static" - print " option ipaddr 192.168.1.1" - print " option netmask 255.255.255.0" - print "" - print "" - print "#### WAN configuration" - print "config interface wan" - p("ifname", "wan_ifname") - p("macaddr", "wan_macaddr") - print " option proto dhcp" - }' > /etc/config/network -} |