diff options
Diffstat (limited to 'target/linux/au1000-2.6/patches')
10 files changed, 0 insertions, 667 deletions
diff --git a/target/linux/au1000-2.6/patches/001-au1x00_gpio.patch b/target/linux/au1000-2.6/patches/001-au1x00_gpio.patch deleted file mode 100644 index d4339aec46..0000000000 --- a/target/linux/au1000-2.6/patches/001-au1x00_gpio.patch +++ /dev/null @@ -1,294 +0,0 @@ -diff -urN linux-2.6.21.1/arch/mips/au1000/common/gpio.c linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c ---- linux-2.6.21.1/arch/mips/au1000/common/gpio.c 2007-04-27 23:49:26.000000000 +0200 -+++ linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c 2007-05-22 21:41:55.000000000 +0200 -@@ -1,4 +1,7 @@ - /* -+ * Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org> -+ * Architecture specific GPIO support -+ * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your -@@ -18,101 +21,133 @@ - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ * Notes : -+ * au1000 SoC have only one GPIO line : GPIO1 -+ * others have a second one : GPIO2 - */ -+ -+#include <linux/autoconf.h> -+#include <linux/init.h> -+#include <linux/types.h> - #include <linux/module.h> --#include <au1000.h> --#include <au1xxx_gpio.h> -+ -+#include <asm/addrspace.h> -+#include <asm/io.h> -+ -+#include <asm/mach-au1x00/au1000.h> -+#include <asm/gpio.h> - - #define gpio1 sys - #if !defined(CONFIG_SOC_AU1000) - static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE; -+#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000 - --#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000 -- --int au1xxx_gpio2_read(int signal) -+static int au1xxx_gpio2_read(unsigned gpio) - { -- signal -= 200; --/* gpio2->dir &= ~(0x01 << signal); //Set GPIO to input */ -- return ((gpio2->pinstate >> signal) & 0x01); -+ gpio -= AU1XXX_GPIO_BASE; -+ return ((gpio2->pinstate >> gpio) & 0x01); - } - --void au1xxx_gpio2_write(int signal, int value) -+static void au1xxx_gpio2_write(unsigned gpio, int value) - { -- signal -= 200; -+ gpio -= AU1XXX_GPIO_BASE; - -- gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) | -- (value << signal); -+ gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | -+ (value << gpio); - } - --void au1xxx_gpio2_tristate(int signal) -+static int au1xxx_gpio2_direction_input(unsigned gpio) - { -- signal -= 200; -- gpio2->dir &= ~(0x01 << signal); /* Set GPIO to input */ -+ gpio -= AU1XXX_GPIO_BASE; -+ gpio2->dir &= ~(0x01 << gpio); -+ return 0; - } --#endif - --int au1xxx_gpio1_read(int signal) -+static int au1xxx_gpio2_direction_output(unsigned gpio, int value) -+{ -+ gpio -= AU1XXX_GPIO_BASE; -+ gpio2->dir = (0x01 << gpio) | (value << gpio); -+ return 0; -+} -+ -+#endif /* !defined(CONFIG_SOC_AU1000) */ -+ -+static int au1xxx_gpio1_read(unsigned gpio) - { --/* gpio1->trioutclr |= (0x01 << signal); */ -- return ((gpio1->pinstaterd >> signal) & 0x01); -+ return ((gpio1->pinstaterd >> gpio) & 0x01); - } - --void au1xxx_gpio1_write(int signal, int value) -+static void au1xxx_gpio1_write(unsigned gpio, int value) - { - if(value) -- gpio1->outputset = (0x01 << signal); -+ gpio1->outputset = (0x01 << gpio); - else -- gpio1->outputclr = (0x01 << signal); /* Output a Zero */ -+ /* Output a zero */ -+ gpio1->outputclr = (0x01 << gpio); - } - --void au1xxx_gpio1_tristate(int signal) -+static int au1xxx_gpio1_direction_input(unsigned gpio) - { -- gpio1->trioutclr = (0x01 << signal); /* Tristate signal */ -+ gpio1->pininputen = (0x01 << gpio); -+ return 0; - } - -+static int au1xxx_gpio1_direction_output(unsigned gpio, int value) -+{ -+ gpio1->trioutclr = (0x01 & gpio); -+ return 0; -+} - --int au1xxx_gpio_read(int signal) -+int au1xxx_gpio_get_value(unsigned gpio) - { -- if(signal >= 200) -+ if(gpio >= AU1XXX_GPIO_BASE) - #if defined(CONFIG_SOC_AU1000) - return 0; - #else -- return au1xxx_gpio2_read(signal); -+ return au1xxx_gpio2_read(gpio); - #endif - else -- return au1xxx_gpio1_read(signal); -+ return au1xxx_gpio1_read(gpio); - } - --void au1xxx_gpio_write(int signal, int value) -+void au1xxx_gpio_set_value(unsigned gpio, int value) - { -- if(signal >= 200) -+ if(gpio >= AU1XXX_GPIO_BASE) - #if defined(CONFIG_SOC_AU1000) - ; - #else -- au1xxx_gpio2_write(signal, value); -+ au1xxx_gpio2_write(gpio, value); - #endif - else -- au1xxx_gpio1_write(signal, value); -+ au1xxx_gpio1_write(gpio, value); - } - --void au1xxx_gpio_tristate(int signal) -+int au1xxx_gpio_direction_input(unsigned gpio) - { -- if(signal >= 200) -+ if (gpio >= AU1XXX_GPIO_BASE) - #if defined(CONFIG_SOC_AU1000) - ; - #else -- au1xxx_gpio2_tristate(signal); -+ return au1xxx_gpio2_direction_input(gpio); - #endif - else -- au1xxx_gpio1_tristate(signal); -+ return au1xxx_gpio1_direction_input(gpio); - } - --void au1xxx_gpio1_set_inputs(void) -+int au1xxx_gpio_direction_output(unsigned gpio, int value) - { -- gpio1->pininputen = 0; -+ if (gpio >= AU1XXX_GPIO_BASE) -+#if defined(CONFIG_SOC_AU1000) -+ ; -+#else -+ return au1xxx_gpio2_direction_output(gpio, value); -+#endif -+ else -+ return au1xxx_gpio1_direction_output(gpio, value); - } - --EXPORT_SYMBOL(au1xxx_gpio1_set_inputs); --EXPORT_SYMBOL(au1xxx_gpio_tristate); --EXPORT_SYMBOL(au1xxx_gpio_write); --EXPORT_SYMBOL(au1xxx_gpio_read); -+EXPORT_SYMBOL(au1xxx_gpio_direction_output); -+EXPORT_SYMBOL(au1xxx_gpio_direction_input); -+EXPORT_SYMBOL(au1xxx_gpio_get_value); -+EXPORT_SYMBOL(au1xxx_gpio_set_value); ---- linux-2.6.21.1/arch/mips/Kconfig 2007-04-27 23:49:26.000000000 +0200 -+++ linux-2.6.21.1.new/arch/mips/Kconfig 2007-05-21 08:04:42.000000000 +0200 -@@ -1044,6 +1044,7 @@ - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_APM_EMULATION - select SYS_SUPPORTS_KGDB -+ select GENERIC_GPIO - - config PNX8550 - bool -diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h ---- linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h 2007-04-27 23:49:26.000000000 +0200 -+++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h 1970-01-01 01:00:00.000000000 +0100 -@@ -1,20 +0,0 @@ --#ifndef __AU1XXX_GPIO_H --#define __AU1XXX_GPIO_H -- --void au1xxx_gpio1_set_inputs(void); --void au1xxx_gpio_tristate(int signal); --void au1xxx_gpio_write(int signal, int value); --int au1xxx_gpio_read(int signal); -- --typedef volatile struct --{ -- u32 dir; -- u32 reserved; -- u32 output; -- u32 pinstate; -- u32 inten; -- u32 enable; -- --} AU1X00_GPIO2; -- --#endif //__AU1XXX_GPIO_H -diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h ---- linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h 2007-05-21 01:10:22.000000000 +0200 -@@ -0,0 +1,69 @@ -+#ifndef _AU1XXX_GPIO_H_ -+#define _AU1XXX_GPIO_H_ -+ -+#define AU1XXX_GPIO_BASE 200 -+ -+typedef volatile struct -+{ -+ u32 dir; -+ u32 reserved; -+ u32 output; -+ u32 pinstate; -+ u32 inten; -+ u32 enable; -+ -+} AU1X00_GPIO2; -+ -+extern int au1xxx_gpio_get_value(unsigned gpio); -+extern void au1xxx_gpio_set_value(unsigned gpio, int value); -+extern int au1xxx_gpio_direction_input(unsigned gpio); -+extern int au1xxx_gpio_direction_output(unsigned gpio, int value); -+ -+ -+/* Wrappers for the arch-neutral GPIO API */ -+ -+static inline int gpio_request(unsigned gpio, const char *label) -+{ -+ /* Not yet implemented */ -+ return 0; -+} -+ -+static inline void gpio_free(unsigned gpio) -+{ -+ /* Not yet implemented */ -+} -+ -+static inline int gpio_direction_input(unsigned gpio) -+{ -+ return au1xxx_gpio_direction_input(gpio); -+} -+ -+static inline int gpio_direction_output(unsigned gpio, int value) -+{ -+ return au1xxx_gpio_direction_output(gpio, value); -+} -+ -+static inline int gpio_get_value(unsigned gpio) -+{ -+ return au1xxx_gpio_get_value(gpio); -+} -+ -+static inline void gpio_set_value(unsigned gpio, int value) -+{ -+ au1xxx_gpio_set_value(gpio, value); -+} -+ -+static inline int gpio_to_irq(unsigned gpio) -+{ -+ return gpio; -+} -+ -+static inline int irq_to_gpio(unsigned irq) -+{ -+ return irq; -+} -+ -+/* For cansleep */ -+#include <asm-generic/gpio.h> -+ -+#endif /* _AU1XXX_GPIO_H_ */ diff --git a/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch b/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch deleted file mode 100644 index 946bd84540..0000000000 --- a/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch +++ /dev/null @@ -1,24 +0,0 @@ -diff -urN linux-2.6.16.7/drivers/net/au1000_eth.c linux-2.6.16.7.new/drivers/net/au1000_eth.c ---- linux-2.6.16.7/drivers/net/au1000_eth.c 2006-04-17 23:53:25.000000000 +0200 -+++ linux-2.6.16.7.new/drivers/net/au1000_eth.c 2006-04-23 01:42:48.000000000 +0200 -@@ -12,6 +12,9 @@ - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * -+ * Bjoern Riemer 2004 -+ * riemer@fokus.fraunhofer.de or riemer@riemer-nt.de -+ * // fixed the link beat detection with ioctls (SIOCGMIIPHY) - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it -@@ -1672,6 +1675,10 @@ - aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed); - control = MAC_DISABLE_RX_OWN | MAC_RX_ENABLE | MAC_TX_ENABLE; - #ifndef CONFIG_CPU_LITTLE_ENDIAN -+ /*riemer: fix for startup without cable */ -+ if (!link) -+ dev->flags &= ~IFF_RUNNING; -+ - control |= MAC_BIG_ENDIAN; - #endif - if (link && (dev->if_port == IF_PORT_100BASEFX)) { diff --git a/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch b/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch deleted file mode 100644 index f4d380c729..0000000000 --- a/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch +++ /dev/null @@ -1,241 +0,0 @@ -diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c ---- linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c 2006-04-17 23:53:25.000000000 +0200 -+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c 2006-04-23 11:54:31.000000000 +0200 -@@ -64,6 +64,7 @@ - { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, -+ { AU1500_GPIO_207, INTC_INT_RISE_AND_FALL_EDGE, 0 }, - }; - - int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t); -diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile linux-2.6.16.7.new/arch/mips/au1000/mtx-1/Makefile ---- linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile 2006-04-17 23:53:25.000000000 +0200 -+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/Makefile 2006-04-23 14:01:36.000000000 +0200 -@@ -8,3 +8,4 @@ - # - - lib-y := init.o board_setup.o irqmap.o -+obj-y := mtx-1_sysbtn.o -diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c ---- linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c 2006-04-23 14:01:17.000000000 +0200 -@@ -0,0 +1,218 @@ -+/* -+ * Driver for the MTX-1 System Button. -+ * -+ * (c) Copyright 2005 4G Systems <info@4g-systems.biz>, All Rights Reserved. -+ * http://www.4g-systems.biz -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ * -+ * Neither Michael Stickel nor 4G Systeme GmbH admit liability nor provide -+ * warranty for any of this software. This material is provided -+ * "AS-IS" and at no charge. -+ * -+ * (c) Copyright 2005 4G Systems <info@4g-systems.biz> -+ * -+ * Release 0.01. -+ * -+ * Author: Michael Stickel michael.stickel@4g-systems.biz -+ * -+ * -+ * After the module is loaded there is a device /dev/misc/btn -+ * that can be read. It returns one char '1' if the button -+ * has been pressed an '0' if it has been released. -+ */ -+#include <linux/autoconf.h> -+#include <linux/module.h> -+#include <linux/version.h> -+#include <linux/types.h> -+#include <linux/errno.h> -+#include <linux/kernel.h> -+#include <linux/poll.h> -+#include <linux/sched.h> -+#include <linux/miscdevice.h> -+#include <linux/slab.h> -+#include <linux/init.h> -+#include <linux/irq.h> -+#include <linux/interrupt.h> -+ -+#include <asm/uaccess.h> -+ -+#include <asm/mach-au1x00/au1000.h> -+ -+ -+#ifndef FALSE -+# define FALSE (0) -+#endif -+ -+#ifndef TRUE -+# define TRUE (!FALSE) -+#endif -+ -+ -+//---------[ declarations ]----------------- -+ -+ -+static DECLARE_WAIT_QUEUE_HEAD(mtx1btn_wait_queue); -+static char state_changed; -+static char last_value; -+static char is_inuse; -+ -+ -+//---------[ Hardware Functions ]----------------- -+ -+// The MTX-1 Button is attached to GPIO207. -+#define MTX1_GPIO2_SYSBTN (7) -+#define MTX1_SYSBTN_IRQ (AU1500_GPIO_207) -+ -+ -+static char mtx1_getbtn (int btnno) -+{ -+ if (btnno==0) { -+ return (au_readl(GPIO2_PINSTATE) & (1<<MTX1_GPIO2_SYSBTN)) ? 0 : 1; -+ } -+ return 0; -+} -+ -+static void mtx1_initbuttons (void) -+{ -+ au_writel (au_readl(GPIO2_DIR) & ~(1<<MTX1_GPIO2_SYSBTN), GPIO2_DIR); -+} -+ -+ -+//---------[ Interrupt handling ]----------------- -+ -+ -+static void mtx1_btn_interrupt (int irq, void *private) -+{ -+ char value = mtx1_getbtn(0); -+ if (last_value != value) -+ { -+ last_value = value; -+ state_changed = 1; -+ wake_up (&mtx1btn_wait_queue); -+ } -+// kill_fasync(&async_queue, SIGIO, POLL_OUT); -+} -+ -+ -+static int mtx1_btn_startirq (void) -+{ -+ if (!request_irq (MTX1_SYSBTN_IRQ, mtx1_btn_interrupt, 0 /* | SA_INTERRUPT */, "mtx1btn", (void *)&state_changed)) { -+ return 0; -+ } -+ return -1; -+} -+ -+static int mtx1_btn_stopirq (void) -+{ -+ free_irq(MTX1_SYSBTN_IRQ, (void *)&state_changed); -+ return 0; -+} -+ -+ -+ -+//---------[ File Functions ]----------------- -+ -+ -+static int mtx1sysbtn_minor = -1; -+ -+ -+static int mtx1sysbtn_open (struct inode *inode, struct file *file) -+{ -+ if (MINOR(inode->i_rdev)!=mtx1sysbtn_minor) return -ENODEV; -+ if (is_inuse) return -EBUSY; -+ is_inuse=1; -+ last_value = mtx1_getbtn(0); -+ state_changed = 0; -+ return 0; -+} -+ -+ -+static int mtx1sysbtn_release (struct inode *inode, struct file *file) { -+ if (MINOR(inode->i_rdev)==mtx1sysbtn_minor) { -+ is_inuse=0; -+ } -+ return 0; -+} -+ -+ -+static ssize_t mtx1sysbtn_read (struct file *file, char *buf, size_t count, loff_t *ppos) -+{ -+ if (count < 1) -+ return -EINVAL; -+ if (!state_changed) -+ interruptible_sleep_on (&mtx1btn_wait_queue); -+ state_changed = 0; -+ char c = last_value ? '1' : '0'; /* mtx1_getbtn(0) */ -+ if(copy_to_user(buf, &c, 1)) -+ return -EFAULT; -+ return 1; -+} -+ -+ -+static unsigned int mtx1sysbtn_poll (struct file *file, poll_table * wait) -+{ -+ unsigned int mask = 0; -+ -+ poll_wait (file, &mtx1btn_wait_queue, wait); -+ -+ if (state_changed) // state changed since last time. -+ mask |= POLLIN | POLLRDNORM; -+ -+ return mask; -+} -+ -+ -+static struct file_operations mtx1sysbtn_fops = { -+ .owner = THIS_MODULE, -+ .read = mtx1sysbtn_read, -+ .poll = mtx1sysbtn_poll, -+ .open = mtx1sysbtn_open, -+ .release = mtx1sysbtn_release -+}; -+ -+ -+static struct miscdevice mtx1sysbtn_miscdev = { -+ MISC_DYNAMIC_MINOR /* SYSBTN_MINOR */ , -+ "btn", -+ &mtx1sysbtn_fops -+}; -+ -+ -+ -+//---------[ Module Functions ]----------------- -+ -+ -+void __exit exit_mtx1_sysbtn (void) -+{ -+ is_inuse = 1; -+ mtx1_btn_stopirq (); -+ misc_deregister(&mtx1sysbtn_miscdev); -+} -+ -+ -+static int __init init_mtx1_sysbtn (void) -+{ -+ printk("MTX-1 System Button driver\n"); -+ is_inuse = 1; -+ mtx1_initbuttons (); -+ if (misc_register (&mtx1sysbtn_miscdev) >= 0) { -+ mtx1sysbtn_minor = mtx1sysbtn_miscdev.minor; -+ if (mtx1_btn_startirq () == 0) { -+ is_inuse=0; -+ return 0; -+ } -+ misc_deregister(&mtx1sysbtn_miscdev); -+ } -+ return 1; -+} -+ -+module_init(init_mtx1_sysbtn); -+module_exit(exit_mtx1_sysbtn); -+ -+MODULE_AUTHOR("Michael Stickel"); -+MODULE_DESCRIPTION("Driver for the MTX-1 system button"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/au1000-2.6/patches/011-mtx1_leds.patch b/target/linux/au1000-2.6/patches/011-mtx1_leds.patch deleted file mode 100644 index 93c681e964..0000000000 --- a/target/linux/au1000-2.6/patches/011-mtx1_leds.patch +++ /dev/null @@ -1,28 +0,0 @@ -diff -urN linux-2.6.19.2/drivers/leds/Kconfig linux-2.6.19.2.new/drivers/leds/Kconfig ---- linux-2.6.19.2/drivers/leds/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.new/drivers/leds/Kconfig 2007-03-02 13:50:28.000000000 +0100 -@@ -76,6 +76,13 @@ - This option enables support for the Soekris net4801 and net4826 error - LED. - -+config LEDS_MTX1 -+ tristate "LED Support for MTX-1 boards" -+ depends on LEDS_CLASS && MIPS_MTX1 -+ help -+ This option enables support for the MTX-1 power and status LED. -+ -+ - comment "LED Triggers" - - config LEDS_TRIGGERS -diff -urN linux-2.6.21.1/drivers/leds/Makefile linux-2.6.21.1.new/drivers/leds/Makefile ---- linux-2.6.21.1/drivers/leds/Makefile 2007-04-27 23:49:26.000000000 +0200 -+++ linux-2.6.21.1.new/drivers/leds/Makefile 2007-05-24 23:39:18.000000000 +0200 -@@ -16,6 +16,7 @@ - obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o - obj-$(CONFIG_LEDS_H1940) += leds-h1940.o - obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o -+obj-$(CONFIG_LEDS_MTX1) += leds-mtx1.o - - # LED Triggers - obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o diff --git a/target/linux/au1000-2.6/patches/012-mtx1_cmdline.patch b/target/linux/au1000-2.6/patches/012-mtx1_cmdline.patch deleted file mode 100644 index 8f078428c4..0000000000 --- a/target/linux/au1000-2.6/patches/012-mtx1_cmdline.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- linux-2.6.19.2/arch/mips/au1000/mtx-1/init.c.old 2007-04-06 15:01:13.503777992 +0200 -+++ linux-2.6.19.2/arch/mips/au1000/mtx-1/init.c 2007-04-06 15:01:36.296313000 +0200 -@@ -39,7 +39,6 @@ - - int prom_argc; - char **prom_argv, **prom_envp; --extern void __init prom_init_cmdline(void); - extern char *prom_getenv(char *envname); - - const char *get_system_type(void) -@@ -59,7 +58,7 @@ - mips_machgroup = MACH_GROUP_ALCHEMY; - mips_machtype = MACH_MTX1; /* set the platform # */ - -- prom_init_cmdline(); -+ strcpy(arcs_cmdline, CONFIG_CMDLINE); - - memsize_str = prom_getenv("memsize"); - if (!memsize_str) diff --git a/target/linux/au1000-2.6/patches/013-openwrt_rootfs.patch b/target/linux/au1000-2.6/patches/013-openwrt_rootfs.patch deleted file mode 100644 index 7793161af8..0000000000 --- a/target/linux/au1000-2.6/patches/013-openwrt_rootfs.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- linux-2.6.19.2/drivers/mtd/maps/mtx-1_flash.c 2007-07-10 20:56:30.000000000 +0200 -+++ linux-2.6.19.2.new/drivers/mtd/maps/mtx-1_flash.c 2007-07-23 12:21:16.000000000 +0200 -@@ -28,7 +28,7 @@ - - static struct mtd_partition mtx1_partitions[] = { - { -- .name = "filesystem", -+ .name = "rootfs", - .size = 0x01C00000, - .offset = 0, - },{ diff --git a/target/linux/au1000-2.6/patches/014-au1000_eth_ioctl.patch b/target/linux/au1000-2.6/patches/014-au1000_eth_ioctl.patch deleted file mode 100644 index 6187a7d5af..0000000000 --- a/target/linux/au1000-2.6/patches/014-au1000_eth_ioctl.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- linux-2.6.22.1.orig/drivers/net/au1000_eth.c 2007-07-24 18:43:25.527583520 +0200 -+++ linux-2.6.22.1/drivers/net/au1000_eth.c 2007-07-24 23:07:00.388821102 +0200 -@@ -1320,9 +1320,12 @@ - } - } - -+#define AU1000_KNOWN_PHY_IOCTLS (SIOCGMIIPHY & 0xfff0) - static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) - { - struct au1000_private *aup = (struct au1000_private *)dev->priv; -+ if((cmd & AU1000_KNOWN_PHY_IOCTLS) != AU1000_KNOWN_PHY_IOCTLS) -+ return -EINVAL; - - if (!netif_running(dev)) return -EINVAL; - diff --git a/target/linux/au1000-2.6/patches/015-pci-resource.patch b/target/linux/au1000-2.6/patches/015-pci-resource.patch deleted file mode 100644 index ddbb7ed8a8..0000000000 --- a/target/linux/au1000-2.6/patches/015-pci-resource.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- linux-2.6.22.1.orig/include/asm-mips/mach-au1x00/au1000.h 2007-07-24 18:44:21.598778839 +0200 -+++ linux-2.6.22.1/include/asm-mips/mach-au1x00/au1000.h 2007-07-24 22:08:49.761901610 +0200 -@@ -1680,9 +1680,9 @@ - #define PCI_LAST_DEVFN (19<<3) - - #define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */ --#define IOPORT_RESOURCE_END 0xffffffff -+#define IOPORT_RESOURCE_END 0xfffffffffULL - #define IOMEM_RESOURCE_START 0x10000000 --#define IOMEM_RESOURCE_END 0xffffffff -+#define IOMEM_RESOURCE_END 0xfffffffffULL - - /* - * Borrowed from the PPC arch: diff --git a/target/linux/au1000-2.6/patches/016-pci-io_map.patch b/target/linux/au1000-2.6/patches/016-pci-io_map.patch deleted file mode 100644 index 6a80f7cb44..0000000000 --- a/target/linux/au1000-2.6/patches/016-pci-io_map.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- linux-2.6.22.1.orig/arch/mips/au1000/common/pci.c 2007-07-24 18:42:21.031908123 +0200 -+++ linux-2.6.22.1/arch/mips/au1000/common/pci.c 2007-07-24 22:12:07.373162835 +0200 -@@ -74,6 +74,7 @@ - printk(KERN_ERR "Unable to ioremap pci space\n"); - return 1; - } -+ au1x_controller.io_map_base = virt_io_addr; - - #ifdef CONFIG_DMA_NONCOHERENT - { diff --git a/target/linux/au1000-2.6/patches/017-usb-power.patch b/target/linux/au1000-2.6/patches/017-usb-power.patch deleted file mode 100644 index 7f7fac85bf..0000000000 --- a/target/linux/au1000-2.6/patches/017-usb-power.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- linux-2.6.22.1.orig/arch/mips/au1000/mtx-1/board_setup.c 2007-07-29 18:57:35.000000000 +0200 -+++ linux-2.6.22.1/arch/mips/au1000/mtx-1/board_setup.c 2007-07-29 18:59:48.000000000 +0200 -@@ -54,7 +54,7 @@ - - void __init board_setup(void) - { --#ifdef CONFIG_USB_OHCI -+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - // enable USB power switch - au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR ); - au_writel( 0x100000, GPIO2_OUTPUT ); |