diff options
Diffstat (limited to 'target/linux/at91/patches-2.6.22/000-at91.patch')
| -rw-r--r-- | target/linux/at91/patches-2.6.22/000-at91.patch | 945 |
1 files changed, 508 insertions, 437 deletions
diff --git a/target/linux/at91/patches-2.6.22/000-at91.patch b/target/linux/at91/patches-2.6.22/000-at91.patch index 16ab784881..a9e1a090e9 100644 --- a/target/linux/at91/patches-2.6.22/000-at91.patch +++ b/target/linux/at91/patches-2.6.22/000-at91.patch @@ -1,6 +1,7 @@ -diff -urN linux-2.6.22-rc5/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6.22-rc5.new/arch/arm/boot/compressed/head-at91rm9200.S ---- linux-2.6.22-rc5/arch/arm/boot/compressed/head-at91rm9200.S 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/boot/compressed/head-at91rm9200.S 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/boot/compressed/head-at91rm9200.S +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/boot/compressed/head-at91rm9200.S ++++ linux-2.6.22.19/arch/arm/boot/compressed/head-at91rm9200.S @@ -73,6 +73,12 @@ cmp r7, r3 beq 99f @@ -14,9 +15,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6. @ Unknown board, use the AT91RM9200DK board @ mov r7, #MACH_TYPE_AT91RM9200 mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff) -diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22-rc5.new/arch/arm/configs/at91sam9260ek_defconfig ---- linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/configs/at91sam9260ek_defconfig 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/configs/at91sam9260ek_defconfig +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/configs/at91sam9260ek_defconfig ++++ linux-2.6.22.19/arch/arm/configs/at91sam9260ek_defconfig @@ -1,18 +1,24 @@ # # Automatically generated make config: don't edit @@ -44,7 +46,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -@@ -31,13 +37,16 @@ +@@ -31,13 +37,16 @@ CONFIG_LOCALVERSION="" # CONFIG_SWAP is not set CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set @@ -61,7 +63,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y -@@ -76,7 +85,9 @@ +@@ -76,7 +85,9 @@ CONFIG_KMOD=y # Block layer # CONFIG_BLOCK=y @@ -71,7 +73,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # # IO Schedulers -@@ -110,10 +121,12 @@ +@@ -110,10 +121,12 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -84,7 +86,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set -@@ -129,21 +142,29 @@ +@@ -129,21 +142,29 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_AT91RM9200 is not set CONFIG_ARCH_AT91SAM9260=y # CONFIG_ARCH_AT91SAM9261 is not set @@ -115,7 +117,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # # Processor Type -@@ -166,6 +187,7 @@ +@@ -166,6 +187,7 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set @@ -123,7 +125,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # # Bus support -@@ -193,6 +215,7 @@ +@@ -193,6 +215,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set @@ -131,7 +133,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y -@@ -203,6 +226,7 @@ +@@ -203,6 +226,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" # CONFIG_XIP_KERNEL is not set @@ -139,7 +141,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # # Floating point emulation -@@ -228,7 +252,6 @@ +@@ -228,7 +252,6 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set @@ -147,7 +149,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # # Networking -@@ -242,9 +265,6 @@ +@@ -242,9 +265,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -157,7 +159,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set -@@ -263,14 +283,15 @@ +@@ -263,14 +283,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set @@ -176,7 +178,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set -@@ -328,6 +349,7 @@ +@@ -328,6 +349,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set @@ -184,7 +186,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # CONFIG_SYS_HYPERVISOR is not set # -@@ -348,6 +370,7 @@ +@@ -348,6 +370,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # @@ -192,7 +194,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # # Block devices -@@ -360,7 +383,6 @@ +@@ -360,7 +383,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 @@ -200,7 +202,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -@@ -369,6 +391,7 @@ +@@ -369,6 +391,7 @@ CONFIG_BLK_DEV_INITRD=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y @@ -208,7 +210,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y -@@ -388,6 +411,7 @@ +@@ -388,6 +411,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -216,7 +218,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # # SCSI Transports -@@ -405,6 +429,11 @@ +@@ -405,6 +429,11 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_DEBUG is not set # @@ -228,7 +230,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # Multi-device support (RAID and LVM) # # CONFIG_MD is not set -@@ -425,7 +454,51 @@ +@@ -425,7 +454,51 @@ CONFIG_SCSI_MULTI_LUN=y # # Network device support # @@ -281,7 +283,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set -@@ -517,10 +590,6 @@ +@@ -517,10 +590,6 @@ CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -292,7 +294,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # CONFIG_RAW_DRIVER is not set # -@@ -553,7 +622,11 @@ +@@ -553,7 +622,11 @@ CONFIG_HW_RANDOM=y # # Misc devices # @@ -305,7 +307,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # # LED devices -@@ -582,7 +655,7 @@ +@@ -582,7 +655,7 @@ CONFIG_HW_RANDOM=y # # Graphics support # @@ -314,7 +316,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # CONFIG_FB is not set # -@@ -590,7 +663,6 @@ +@@ -590,7 +663,6 @@ CONFIG_HW_RANDOM=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y @@ -322,7 +324,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # # Sound -@@ -598,6 +670,12 @@ +@@ -598,6 +670,12 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set # @@ -335,7 +337,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # USB support # CONFIG_USB_ARCH_HAS_HCD=y -@@ -610,7 +688,6 @@ +@@ -610,7 +688,6 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y @@ -343,7 +345,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -@@ -619,7 +696,8 @@ +@@ -619,7 +696,8 @@ CONFIG_USB_DEVICEFS=y # # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -353,7 +355,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set -@@ -671,6 +749,7 @@ +@@ -671,6 +749,7 @@ CONFIG_USB_STORAGE_DEBUG=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -361,7 +363,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # # USB Imaging devices -@@ -708,6 +787,7 @@ +@@ -708,6 +787,7 @@ CONFIG_USB_MON=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -369,7 +371,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -@@ -717,6 +797,7 @@ +@@ -717,6 +797,7 @@ CONFIG_USB_MON=y # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set @@ -377,7 +379,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # CONFIG_USB_TEST is not set # -@@ -889,6 +970,11 @@ +@@ -889,6 +970,11 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_UTF8 is not set # @@ -389,7 +391,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 # Profiling support # # CONFIG_PROFILING is not set -@@ -900,28 +986,30 @@ +@@ -900,28 +986,30 @@ CONFIG_NLS_ISO8859_1=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -423,7 +425,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y -@@ -941,9 +1029,12 @@ +@@ -941,9 +1029,12 @@ CONFIG_DEBUG_LL=y # # Library routines # @@ -436,9 +438,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22 CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y -diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22-rc5.new/arch/arm/configs/at91sam9261ek_defconfig ---- linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/configs/at91sam9261ek_defconfig 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/configs/at91sam9261ek_defconfig +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/configs/at91sam9261ek_defconfig ++++ linux-2.6.22.19/arch/arm/configs/at91sam9261ek_defconfig @@ -1,18 +1,24 @@ # # Automatically generated make config: don't edit @@ -466,7 +469,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -@@ -31,13 +37,16 @@ +@@ -31,13 +37,16 @@ CONFIG_LOCALVERSION="" # CONFIG_SWAP is not set CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set @@ -483,7 +486,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y -@@ -76,7 +85,9 @@ +@@ -76,7 +85,9 @@ CONFIG_KMOD=y # Block layer # CONFIG_BLOCK=y @@ -493,7 +496,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # # IO Schedulers -@@ -110,10 +121,12 @@ +@@ -110,10 +121,12 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -506,7 +509,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set -@@ -129,6 +142,7 @@ +@@ -129,6 +142,7 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_AT91RM9200 is not set # CONFIG_ARCH_AT91SAM9260 is not set CONFIG_ARCH_AT91SAM9261=y @@ -514,7 +517,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # # AT91SAM9261 Board Type -@@ -138,12 +152,14 @@ +@@ -138,12 +152,14 @@ CONFIG_MACH_AT91SAM9261EK=y # # AT91 Board Options # @@ -529,7 +532,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # # Processor Type -@@ -166,6 +182,7 @@ +@@ -166,6 +182,7 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set @@ -537,7 +540,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # # Bus support -@@ -193,6 +210,7 @@ +@@ -193,6 +210,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set @@ -545,7 +548,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y -@@ -203,6 +221,7 @@ +@@ -203,6 +221,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" # CONFIG_XIP_KERNEL is not set @@ -553,7 +556,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # # Floating point emulation -@@ -228,7 +247,6 @@ +@@ -228,7 +247,6 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set @@ -561,7 +564,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # # Networking -@@ -245,6 +263,7 @@ +@@ -245,6 +263,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set @@ -569,7 +572,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set -@@ -271,6 +290,7 @@ +@@ -271,6 +290,7 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -577,7 +580,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set -@@ -328,6 +348,7 @@ +@@ -328,6 +348,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set @@ -585,7 +588,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # CONFIG_SYS_HYPERVISOR is not set # -@@ -350,6 +371,7 @@ +@@ -350,6 +371,7 @@ CONFIG_MTD_CMDLINE_PARTS=y # User Modules And Translation Layers # # CONFIG_MTD_CHAR is not set @@ -593,7 +596,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set -@@ -386,6 +408,8 @@ +@@ -386,6 +408,8 @@ CONFIG_MTD_CFI_I2=y # # Self-contained MTD device drivers # @@ -602,7 +605,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -@@ -422,6 +446,7 @@ +@@ -422,6 +446,7 @@ CONFIG_MTD_NAND_AT91=y # # Plug and Play support # @@ -610,7 +613,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # # Block devices -@@ -434,7 +459,6 @@ +@@ -434,7 +459,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 @@ -618,7 +621,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -@@ -443,6 +467,7 @@ +@@ -443,6 +467,7 @@ CONFIG_BLK_DEV_INITRD=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y @@ -626,7 +629,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y -@@ -462,6 +487,7 @@ +@@ -462,6 +487,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -634,7 +637,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # # SCSI Transports -@@ -479,6 +505,11 @@ +@@ -479,6 +505,11 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_DEBUG is not set # @@ -646,7 +649,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # Multi-device support (RAID and LVM) # # CONFIG_MD is not set -@@ -575,7 +606,16 @@ +@@ -575,7 +606,16 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set @@ -664,7 +667,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # CONFIG_INPUT_MISC is not set # -@@ -634,10 +674,6 @@ +@@ -634,10 +674,6 @@ CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -675,7 +678,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # CONFIG_RAW_DRIVER is not set # -@@ -662,6 +698,7 @@ +@@ -662,6 +698,7 @@ CONFIG_I2C_CHARDEV=y # I2C Hardware Bus support # CONFIG_I2C_AT91=y @@ -683,7 +686,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set -@@ -686,8 +723,20 @@ +@@ -686,8 +723,20 @@ CONFIG_I2C_AT91=y # # SPI support # @@ -706,7 +709,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # # Dallas's 1-wire bus -@@ -703,7 +752,11 @@ +@@ -703,7 +752,11 @@ CONFIG_I2C_AT91=y # # Misc devices # @@ -719,7 +722,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # # LED devices -@@ -732,7 +785,7 @@ +@@ -732,7 +785,7 @@ CONFIG_I2C_AT91=y # # Graphics support # @@ -728,7 +731,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # CONFIG_FB is not set # -@@ -740,7 +793,6 @@ +@@ -740,7 +793,6 @@ CONFIG_I2C_AT91=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y @@ -736,7 +739,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # # Sound -@@ -748,6 +800,12 @@ +@@ -748,6 +800,12 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set # @@ -749,7 +752,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # USB support # CONFIG_USB_ARCH_HAS_HCD=y -@@ -760,7 +818,6 @@ +@@ -760,7 +818,6 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y @@ -757,7 +760,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -@@ -769,7 +826,8 @@ +@@ -769,7 +826,8 @@ CONFIG_USB_DEVICEFS=y # # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -767,7 +770,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set -@@ -821,6 +879,7 @@ +@@ -821,6 +879,7 @@ CONFIG_USB_STORAGE_DEBUG=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -775,7 +778,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # # USB Imaging devices -@@ -858,6 +917,7 @@ +@@ -858,6 +917,7 @@ CONFIG_USB_MON=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -783,7 +786,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -@@ -867,6 +927,7 @@ +@@ -867,6 +927,7 @@ CONFIG_USB_MON=y # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set @@ -791,7 +794,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # CONFIG_USB_TEST is not set # -@@ -903,7 +964,6 @@ +@@ -903,7 +964,6 @@ CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y CONFIG_MMC_AT91=m @@ -799,7 +802,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # # Real Time Clock -@@ -973,7 +1033,6 @@ +@@ -973,7 +1033,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set @@ -807,7 +810,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set -@@ -1045,6 +1104,11 @@ +@@ -1045,6 +1104,11 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_UTF8 is not set # @@ -819,7 +822,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 # Profiling support # # CONFIG_PROFILING is not set -@@ -1056,28 +1120,30 @@ +@@ -1056,28 +1120,30 @@ CONFIG_NLS_ISO8859_1=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -853,7 +856,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y -@@ -1097,9 +1163,12 @@ +@@ -1097,9 +1163,12 @@ CONFIG_DEBUG_LL=y # # Library routines # @@ -866,9 +869,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22 CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y -diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22-rc5.new/arch/arm/configs/at91sam9263ek_defconfig ---- linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/configs/at91sam9263ek_defconfig 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/configs/at91sam9263ek_defconfig +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/configs/at91sam9263ek_defconfig ++++ linux-2.6.22.19/arch/arm/configs/at91sam9263ek_defconfig @@ -1,11 +1,14 @@ # # Automatically generated make config: don't edit @@ -886,7 +890,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 CONFIG_GENERIC_HARDIRQS=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y -@@ -15,6 +18,7 @@ +@@ -15,6 +18,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -894,7 +898,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -@@ -33,6 +37,7 @@ +@@ -33,6 +37,7 @@ CONFIG_LOCALVERSION="" # CONFIG_SWAP is not set CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set @@ -902,7 +906,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -@@ -41,6 +46,7 @@ +@@ -41,6 +46,7 @@ CONFIG_SYSVIPC=y # CONFIG_IKCONFIG is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set @@ -910,7 +914,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y -@@ -120,6 +126,7 @@ +@@ -120,6 +126,7 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_L7200 is not set @@ -918,7 +922,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set -@@ -152,6 +159,7 @@ +@@ -152,6 +159,7 @@ CONFIG_MTD_AT91_DATAFLASH_CARD=y # AT91 Feature Selections # # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set @@ -926,7 +930,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # # Processor Type -@@ -174,6 +182,7 @@ +@@ -174,6 +182,7 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set @@ -934,7 +938,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # # Bus support -@@ -201,6 +210,7 @@ +@@ -201,6 +210,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set @@ -942,7 +946,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y -@@ -211,6 +221,7 @@ +@@ -211,6 +221,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" # CONFIG_XIP_KERNEL is not set @@ -950,7 +954,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # # Floating point emulation -@@ -236,7 +247,6 @@ +@@ -236,7 +247,6 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set @@ -958,7 +962,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # # Networking -@@ -333,6 +343,7 @@ +@@ -333,6 +343,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set @@ -966,7 +970,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # CONFIG_SYS_HYPERVISOR is not set # -@@ -430,6 +441,7 @@ +@@ -430,6 +441,7 @@ CONFIG_MTD_NAND_AT91=y # # Plug and Play support # @@ -974,7 +978,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # # Block devices -@@ -443,7 +455,6 @@ +@@ -443,7 +455,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 @@ -982,7 +986,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -@@ -531,6 +542,7 @@ +@@ -531,6 +542,7 @@ CONFIG_NETDEVICES=y # CONFIG_NET_ETHERNET=y CONFIG_MII=y @@ -990,7 +994,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set -@@ -685,6 +697,7 @@ +@@ -685,6 +697,7 @@ CONFIG_I2C_CHARDEV=y # I2C Hardware Bus support # CONFIG_I2C_AT91=y @@ -998,7 +1002,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set -@@ -722,6 +735,7 @@ +@@ -722,6 +735,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # @@ -1006,7 +1010,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # # Dallas's 1-wire bus -@@ -737,7 +751,11 @@ +@@ -737,7 +751,11 @@ CONFIG_SPI_ATMEL=y # # Misc devices # @@ -1019,7 +1023,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # # LED devices -@@ -766,15 +784,23 @@ +@@ -766,15 +784,23 @@ CONFIG_SPI_ATMEL=y # # Graphics support # @@ -1044,7 +1048,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set -@@ -789,7 +815,6 @@ +@@ -789,7 +815,6 @@ CONFIG_DUMMY_CONSOLE=y # Logo configuration # # CONFIG_LOGO is not set @@ -1052,7 +1056,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # # Sound -@@ -800,6 +825,7 @@ +@@ -800,6 +825,7 @@ CONFIG_DUMMY_CONSOLE=y # HID Devices # CONFIG_HID=y @@ -1060,7 +1064,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # # USB support -@@ -814,9 +840,7 @@ +@@ -814,9 +840,7 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y @@ -1070,7 +1074,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # CONFIG_USB_OTG is not set # -@@ -824,7 +848,8 @@ +@@ -824,7 +848,8 @@ CONFIG_USB_DEVICEFS=y # # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1080,7 +1084,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set -@@ -877,6 +902,7 @@ +@@ -877,6 +902,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1088,7 +1092,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # # USB Imaging devices -@@ -914,6 +940,7 @@ +@@ -914,6 +940,7 @@ CONFIG_USB_MON=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1096,7 +1100,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -@@ -923,6 +950,7 @@ +@@ -923,6 +950,7 @@ CONFIG_USB_MON=y # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set @@ -1104,7 +1108,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # CONFIG_USB_TEST is not set # -@@ -959,7 +987,6 @@ +@@ -959,7 +987,6 @@ CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y CONFIG_MMC_AT91=m @@ -1112,7 +1116,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # # Real Time Clock -@@ -1136,15 +1163,16 @@ +@@ -1136,15 +1163,16 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y @@ -1130,7 +1134,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -@@ -1155,6 +1183,7 @@ +@@ -1155,6 +1183,7 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set @@ -1138,7 +1142,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y -@@ -1180,5 +1209,7 @@ +@@ -1180,5 +1209,7 @@ CONFIG_BITREVERSE=y CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y @@ -1147,9 +1151,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22 -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y -diff -urN linux-2.6.22-rc5/arch/arm/configs/cam60_defconfig linux-2.6.22-rc5.new/arch/arm/configs/cam60_defconfig ---- linux-2.6.22-rc5/arch/arm/configs/cam60_defconfig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.22-rc5.new/arch/arm/configs/cam60_defconfig 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/configs/cam60_defconfig +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/arch/arm/configs/cam60_defconfig @@ -0,0 +1,954 @@ +# +# Automatically generated make config: don't edit @@ -2105,9 +2110,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/cam60_defconfig linux-2.6.22-rc5.new +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y -diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.new/arch/arm/configs/kb9202_defconfig ---- linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/configs/kb9202_defconfig 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/configs/kb9202_defconfig +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/configs/kb9202_defconfig ++++ linux-2.6.22.19/arch/arm/configs/kb9202_defconfig @@ -1,19 +1,31 @@ # # Automatically generated make config: don't edit @@ -2145,7 +2151,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 -@@ -21,54 +33,103 @@ +@@ -21,54 +33,103 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" @@ -2266,7 +2272,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set -@@ -76,34 +137,52 @@ +@@ -76,34 +137,52 @@ CONFIG_KMOD=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set @@ -2326,7 +2332,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # # Processor Features -@@ -112,24 +191,44 @@ +@@ -112,24 +191,44 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set @@ -2373,7 +2379,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y -@@ -138,8 +237,10 @@ +@@ -138,8 +237,10 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x10000000 CONFIG_ZBOOT_ROM_BSS=0x20040000 @@ -2386,7 +2392,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # # Floating point emulation -@@ -150,6 +251,7 @@ +@@ -150,6 +251,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 roo # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set @@ -2394,7 +2400,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # # Userspace binary formats -@@ -165,6 +267,96 @@ +@@ -165,6 +267,96 @@ CONFIG_BINFMT_MISC=y # CONFIG_PM is not set # @@ -2491,7 +2497,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # Device Drivers # -@@ -173,13 +365,95 @@ +@@ -173,13 +365,95 @@ CONFIG_BINFMT_MISC=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y @@ -2590,7 +2596,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # # Parallel port support -@@ -189,6 +463,7 @@ +@@ -189,6 +463,7 @@ CONFIG_DEBUG_DRIVER=y # # Plug and Play support # @@ -2598,7 +2604,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # # Block devices -@@ -196,28 +471,27 @@ +@@ -196,28 +471,27 @@ CONFIG_DEBUG_DRIVER=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -2636,7 +2642,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne CONFIG_SCSI_PROC_FS=y # -@@ -233,97 +507,61 @@ +@@ -233,97 +507,61 @@ CONFIG_CHR_DEV_SG=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # @@ -2758,7 +2764,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set -@@ -331,6 +569,11 @@ +@@ -331,6 +569,11 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # @@ -2770,7 +2776,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y -@@ -357,11 +600,20 @@ +@@ -357,11 +600,20 @@ CONFIG_ARM_AT91_ETHER=y # CONFIG_NET_RADIO is not set # @@ -2791,7 +2797,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # # ISDN subsystem -@@ -372,6 +624,7 @@ +@@ -372,6 +624,7 @@ CONFIG_ARM_AT91_ETHER=y # Input device support # CONFIG_INPUT=y @@ -2799,7 +2805,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # # Userland interfaces -@@ -397,9 +650,7 @@ +@@ -397,9 +650,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # Hardware I/O ports # @@ -2810,7 +2816,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # CONFIG_GAMEPORT is not set # -@@ -408,6 +659,7 @@ +@@ -408,6 +659,7 @@ CONFIG_SERIO=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y @@ -2818,7 +2824,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # CONFIG_SERIAL_NONSTANDARD is not set # -@@ -420,11 +672,11 @@ +@@ -420,11 +672,11 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y @@ -2832,7 +2838,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # # IPMI -@@ -435,21 +687,23 @@ +@@ -435,21 +687,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set @@ -2860,7 +2866,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # # I2C support -@@ -457,10 +711,50 @@ +@@ -457,10 +711,50 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_I2C is not set # @@ -2911,7 +2917,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # Multimedia devices # # CONFIG_VIDEO_DEV is not set -@@ -469,17 +763,57 @@ +@@ -469,17 +763,57 @@ CONFIG_LEGACY_PTY_COUNT=256 # Digital Video Broadcasting Devices # # CONFIG_DVB is not set @@ -2970,7 +2976,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # # Sound -@@ -487,82 +821,98 @@ +@@ -487,82 +821,98 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set # @@ -3093,7 +3099,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set -@@ -580,12 +930,23 @@ +@@ -580,12 +930,23 @@ CONFIG_USB_STORAGE_DEBUG=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set @@ -3119,7 +3125,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # # USB DSL modem support -@@ -599,36 +960,51 @@ +@@ -599,36 +960,51 @@ CONFIG_USB_STORAGE_DEBUG=y # # MMC/SD Card support # @@ -3182,7 +3188,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # # CD-ROM/DVD Filesystems -@@ -643,25 +1019,40 @@ +@@ -643,25 +1019,40 @@ CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 @@ -3227,7 +3233,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set -@@ -675,16 +1066,23 @@ +@@ -675,16 +1066,23 @@ CONFIG_RAMFS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -3251,7 +3257,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # # Partition Types -@@ -734,26 +1132,51 @@ +@@ -734,26 +1132,51 @@ CONFIG_NLS_ASCII=y # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set @@ -3311,7 +3317,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -@@ -766,7 +1189,43 @@ +@@ -766,7 +1189,43 @@ CONFIG_DEBUG_LL=y # # Cryptographic options # @@ -3356,7 +3362,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne # # Hardware crypto devices -@@ -775,6 +1234,14 @@ +@@ -775,6 +1234,14 @@ CONFIG_DEBUG_LL=y # # Library routines # @@ -3371,10 +3377,11 @@ diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.ne +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91rm9200.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91rm9200.c 2007-07-29 05:23:04.000000000 +0200 -@@ -267,6 +267,33 @@ +Index: linux-2.6.22.19/arch/arm/mach-at91/at91rm9200.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91rm9200.c ++++ linux-2.6.22.19/arch/arm/mach-at91/at91rm9200.c +@@ -267,6 +267,33 @@ static void at91rm9200_reset(void) /* -------------------------------------------------------------------- @@ -3408,7 +3415,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200.c linux-2.6.22-rc5.new/ * AT91RM9200 processor initialization * -------------------------------------------------------------------- */ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks) -@@ -288,6 +315,9 @@ +@@ -288,6 +315,9 @@ void __init at91rm9200_initialize(unsign /* Initialize GPIO subsystem */ at91_gpio_init(at91rm9200_gpio, banks); @@ -3418,7 +3425,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200.c linux-2.6.22-rc5.new/ } -@@ -301,28 +331,28 @@ +@@ -301,28 +331,28 @@ void __init at91rm9200_initialize(unsign static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { 7, /* Advanced Interrupt Controller (FIQ) */ 7, /* System Peripherals */ @@ -3462,10 +3469,11 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200.c linux-2.6.22-rc5.new/ 3, /* Ethernet MAC */ 0, /* Advanced Interrupt Controller (IRQ0) */ 0, /* Advanced Interrupt Controller (IRQ1) */ -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91rm9200_devices.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200_devices.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91rm9200_devices.c 2007-07-29 05:23:04.000000000 +0200 -@@ -477,7 +477,18 @@ +Index: linux-2.6.22.19/arch/arm/mach-at91/at91rm9200_devices.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91rm9200_devices.c ++++ linux-2.6.22.19/arch/arm/mach-at91/at91rm9200_devices.c +@@ -477,7 +477,18 @@ void __init at91_add_device_i2c(void) {} * SPI * -------------------------------------------------------------------- */ @@ -3485,7 +3493,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.22- static u64 spi_dmamask = 0xffffffffUL; static struct resource spi_resources[] = { -@@ -494,7 +505,7 @@ +@@ -494,7 +505,7 @@ static struct resource spi_resources[] = }; static struct platform_device at91rm9200_spi_device = { @@ -3494,7 +3502,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.22- .id = 0, .dev = { .dma_mask = &spi_dmamask, -@@ -603,6 +614,32 @@ +@@ -603,6 +614,32 @@ void __init at91_init_leds(u8 cpu_led, u #endif @@ -3527,10 +3535,11 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.22- /* -------------------------------------------------------------------- * UART * -------------------------------------------------------------------- */ -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9260.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9260.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9260.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9260.c 2007-07-29 05:23:04.000000000 +0200 -@@ -269,6 +269,33 @@ +Index: linux-2.6.22.19/arch/arm/mach-at91/at91sam9260.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91sam9260.c ++++ linux-2.6.22.19/arch/arm/mach-at91/at91sam9260.c +@@ -269,6 +269,33 @@ static void at91sam9260_reset(void) /* -------------------------------------------------------------------- @@ -3564,7 +3573,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9260.c linux-2.6.22-rc5.new * AT91SAM9260 processor initialization * -------------------------------------------------------------------- */ -@@ -315,6 +342,9 @@ +@@ -315,6 +342,9 @@ void __init at91sam9260_initialize(unsig /* Register GPIO subsystem */ at91_gpio_init(at91sam9260_gpio, 3); @@ -3574,7 +3583,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9260.c linux-2.6.22-rc5.new } /* -------------------------------------------------------------------- -@@ -327,30 +357,30 @@ +@@ -327,30 +357,30 @@ void __init at91sam9260_initialize(unsig static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { 7, /* Advanced Interrupt Controller */ 7, /* System Peripherals */ @@ -3619,10 +3628,11 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9260.c linux-2.6.22-rc5.new 0, /* Timer Counter 3 */ 0, /* Timer Counter 4 */ 0, /* Timer Counter 5 */ -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9260_devices.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9260_devices.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9260_devices.c 2007-07-29 05:23:04.000000000 +0200 -@@ -524,6 +524,32 @@ +Index: linux-2.6.22.19/arch/arm/mach-at91/at91sam9260_devices.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91sam9260_devices.c ++++ linux-2.6.22.19/arch/arm/mach-at91/at91sam9260_devices.c +@@ -524,6 +524,32 @@ void __init at91_init_leds(u8 cpu_led, u #endif @@ -3655,10 +3665,11 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6.22 /* -------------------------------------------------------------------- * UART * -------------------------------------------------------------------- */ -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9261.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9261.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9261.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9261.c 2007-07-29 05:23:04.000000000 +0200 -@@ -247,6 +247,28 @@ +Index: linux-2.6.22.19/arch/arm/mach-at91/at91sam9261.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91sam9261.c ++++ linux-2.6.22.19/arch/arm/mach-at91/at91sam9261.c +@@ -247,6 +247,28 @@ static void at91sam9261_reset(void) /* -------------------------------------------------------------------- @@ -3687,7 +3698,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9261.c linux-2.6.22-rc5.new * AT91SAM9261 processor initialization * -------------------------------------------------------------------- */ -@@ -267,6 +289,9 @@ +@@ -267,6 +289,9 @@ void __init at91sam9261_initialize(unsig /* Register GPIO subsystem */ at91_gpio_init(at91sam9261_gpio, 3); @@ -3697,7 +3708,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9261.c linux-2.6.22-rc5.new } /* -------------------------------------------------------------------- -@@ -279,25 +304,25 @@ +@@ -279,25 +304,25 @@ void __init at91sam9261_initialize(unsig static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { 7, /* Advanced Interrupt Controller */ 7, /* System Peripherals */ @@ -3738,9 +3749,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9261.c linux-2.6.22-rc5.new 3, /* LCD Controller */ 0, 0, -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9261_devices.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9261_devices.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9261_devices.c 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/mach-at91/at91sam9261_devices.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91sam9261_devices.c ++++ linux-2.6.22.19/arch/arm/mach-at91/at91sam9261_devices.c @@ -14,6 +14,9 @@ #include <asm/mach/map.h> @@ -3751,7 +3763,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6.22 #include <asm/arch/board.h> #include <asm/arch/gpio.h> -@@ -522,6 +525,32 @@ +@@ -522,6 +525,32 @@ void __init at91_init_leds(u8 cpu_led, u #endif @@ -3784,10 +3796,11 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6.22 /* -------------------------------------------------------------------- * UART * -------------------------------------------------------------------- */ -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9263.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9263.c 2007-07-29 05:23:04.000000000 +0200 -@@ -273,6 +273,28 @@ +Index: linux-2.6.22.19/arch/arm/mach-at91/at91sam9263.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91sam9263.c ++++ linux-2.6.22.19/arch/arm/mach-at91/at91sam9263.c +@@ -273,6 +273,28 @@ static void at91sam9263_reset(void) /* -------------------------------------------------------------------- @@ -3816,7 +3829,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263.c linux-2.6.22-rc5.new * AT91SAM9263 processor initialization * -------------------------------------------------------------------- */ -@@ -292,6 +314,9 @@ +@@ -292,6 +314,9 @@ void __init at91sam9263_initialize(unsig /* Register GPIO subsystem */ at91_gpio_init(at91sam9263_gpio, 5); @@ -3826,7 +3839,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263.c linux-2.6.22-rc5.new } /* -------------------------------------------------------------------- -@@ -304,34 +329,34 @@ +@@ -304,34 +329,34 @@ void __init at91sam9263_initialize(unsig static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { 7, /* Advanced Interrupt Controller (FIQ) */ 7, /* System Peripherals */ @@ -3876,9 +3889,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263.c linux-2.6.22-rc5.new 0, /* Advanced Interrupt Controller (IRQ0) */ 0, /* Advanced Interrupt Controller (IRQ1) */ }; -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9263_devices.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263_devices.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9263_devices.c 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/mach-at91/at91sam9263_devices.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91sam9263_devices.c ++++ linux-2.6.22.19/arch/arm/mach-at91/at91sam9263_devices.c @@ -13,6 +13,9 @@ #include <asm/mach/map.h> @@ -3889,7 +3903,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6.22 #include <asm/arch/board.h> #include <asm/arch/gpio.h> -@@ -625,6 +628,56 @@ +@@ -625,6 +628,56 @@ void __init at91_add_device_ac97(struct /* -------------------------------------------------------------------- @@ -3946,7 +3960,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6.22 * LCD Controller * -------------------------------------------------------------------- */ -@@ -715,6 +768,32 @@ +@@ -715,6 +768,32 @@ void __init at91_init_leds(u8 cpu_led, u #endif @@ -3979,10 +3993,11 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6.22 /* -------------------------------------------------------------------- * UART * -------------------------------------------------------------------- */ -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9rl.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9rl.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9rl.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9rl.c 2007-07-29 05:23:04.000000000 +0200 -@@ -246,6 +246,28 @@ +Index: linux-2.6.22.19/arch/arm/mach-at91/at91sam9rl.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91sam9rl.c ++++ linux-2.6.22.19/arch/arm/mach-at91/at91sam9rl.c +@@ -246,6 +246,28 @@ static void at91sam9rl_reset(void) /* -------------------------------------------------------------------- @@ -4011,7 +4026,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9rl.c linux-2.6.22-rc5.new/ * AT91SAM9RL processor initialization * -------------------------------------------------------------------- */ -@@ -284,6 +306,9 @@ +@@ -284,6 +306,9 @@ void __init at91sam9rl_initialize(unsign /* Register GPIO subsystem */ at91_gpio_init(at91sam9rl_gpio, 4); @@ -4021,10 +4036,11 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9rl.c linux-2.6.22-rc5.new/ } /* -------------------------------------------------------------------- -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9rl_devices.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9rl_devices.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9rl_devices.c 2007-07-29 05:23:04.000000000 +0200 -@@ -370,6 +370,32 @@ +Index: linux-2.6.22.19/arch/arm/mach-at91/at91sam9rl_devices.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91sam9rl_devices.c ++++ linux-2.6.22.19/arch/arm/mach-at91/at91sam9rl_devices.c +@@ -370,6 +370,32 @@ void __init at91_init_leds(u8 cpu_led, u #endif @@ -4057,9 +4073,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6.22- /* -------------------------------------------------------------------- * UART * -------------------------------------------------------------------- */ -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-cam60.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-cam60.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/board-cam60.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-cam60.c 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/mach-at91/board-cam60.c +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/arch/arm/mach-at91/board-cam60.c @@ -0,0 +1,148 @@ +/* + * KwikByte CAM60 @@ -4209,9 +4226,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-cam60.c linux-2.6.22-rc5.new + .init_irq = cam60_init_irq, + .init_machine = cam60_board_init, +MACHINE_END -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-chub.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-chub.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/board-chub.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-chub.c 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/mach-at91/board-chub.c +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/arch/arm/mach-at91/board-chub.c @@ -0,0 +1,132 @@ +/* + * linux/arch/arm/mach-at91/board-chub.c @@ -4345,9 +4363,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-chub.c linux-2.6.22-rc5.new/ + .init_irq = chub_init_irq, + .init_machine = chub_board_init, +MACHINE_END -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-csb337.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-csb337.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/board-csb337.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-csb337.c 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/mach-at91/board-csb337.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/board-csb337.c ++++ linux-2.6.22.19/arch/arm/mach-at91/board-csb337.c @@ -24,6 +24,7 @@ #include <linux/module.h> #include <linux/platform_device.h> @@ -4356,7 +4375,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-csb337.c linux-2.6.22-rc5.ne #include <linux/mtd/physmap.h> #include <asm/hardware.h> -@@ -59,6 +60,7 @@ +@@ -59,6 +60,7 @@ static void __init csb337_map_io(void) /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -4364,7 +4383,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-csb337.c linux-2.6.22-rc5.ne /* Setup the serial ports and console */ at91_init_serial(&csb337_uart_config); -@@ -149,6 +151,55 @@ +@@ -149,6 +151,55 @@ static struct platform_device csb_flash .num_resources = ARRAY_SIZE(csb_flash_resources), }; @@ -4420,7 +4439,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-csb337.c linux-2.6.22-rc5.ne static void __init csb337_board_init(void) { /* Serial */ -@@ -168,8 +219,12 @@ +@@ -168,8 +219,12 @@ static void __init csb337_board_init(voi at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices)); /* MMC */ at91_add_device_mmc(0, &csb337_mmc_data); @@ -4433,10 +4452,11 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-csb337.c linux-2.6.22-rc5.ne } MACHINE_START(CSB337, "Cogent CSB337") -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-dk.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-dk.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/board-dk.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-dk.c 2007-07-29 05:23:04.000000000 +0200 -@@ -73,6 +73,185 @@ +Index: linux-2.6.22.19/arch/arm/mach-at91/board-dk.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/board-dk.c ++++ linux-2.6.22.19/arch/arm/mach-at91/board-dk.c +@@ -73,6 +73,185 @@ static void __init dk_init_irq(void) at91rm9200_init_interrupts(NULL); } @@ -4622,7 +4642,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-dk.c linux-2.6.22-rc5.new/ar static struct at91_eth_data __initdata dk_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, -@@ -151,7 +330,7 @@ +@@ -151,7 +330,7 @@ static struct at91_nand_data __initdata #define DK_FLASH_SIZE 0x200000 static struct physmap_flash_data dk_flash_data = { @@ -4631,7 +4651,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-dk.c linux-2.6.22-rc5.new/ar }; static struct resource dk_flash_resource = { -@@ -170,6 +349,13 @@ +@@ -170,6 +349,13 @@ static struct platform_device dk_flash = .num_resources = 1, }; @@ -4645,7 +4665,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-dk.c linux-2.6.22-rc5.new/ar static void __init dk_board_init(void) { -@@ -200,8 +386,10 @@ +@@ -200,8 +386,10 @@ static void __init dk_board_init(void) at91_add_device_nand(&dk_nand_data); /* NOR Flash */ platform_device_register(&dk_flash); @@ -4657,10 +4677,11 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-dk.c linux-2.6.22-rc5.new/ar } MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-ek.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-ek.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/board-ek.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-ek.c 2007-07-29 05:23:04.000000000 +0200 -@@ -73,6 +73,187 @@ +Index: linux-2.6.22.19/arch/arm/mach-at91/board-ek.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/board-ek.c ++++ linux-2.6.22.19/arch/arm/mach-at91/board-ek.c +@@ -73,6 +73,187 @@ static void __init ek_init_irq(void) at91rm9200_init_interrupts(NULL); } @@ -4848,7 +4869,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-ek.c linux-2.6.22-rc5.new/ar static struct at91_eth_data __initdata ek_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, -@@ -113,7 +294,7 @@ +@@ -113,7 +294,7 @@ static struct spi_board_info ek_spi_devi #define EK_FLASH_SIZE 0x200000 static struct physmap_flash_data ek_flash_data = { @@ -4857,7 +4878,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-ek.c linux-2.6.22-rc5.new/ar }; static struct resource ek_flash_resource = { -@@ -132,6 +313,18 @@ +@@ -132,6 +313,18 @@ static struct platform_device ek_flash = .num_resources = 1, }; @@ -4876,7 +4897,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-ek.c linux-2.6.22-rc5.new/ar static void __init ek_board_init(void) { -@@ -158,8 +351,10 @@ +@@ -158,8 +351,10 @@ static void __init ek_board_init(void) #endif /* NOR Flash */ platform_device_register(&ek_flash); @@ -4888,9 +4909,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-ek.c linux-2.6.22-rc5.new/ar } MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-kb9202.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-kb9202.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/board-kb9202.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-kb9202.c 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/mach-at91/board-kb9202.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/board-kb9202.c ++++ linux-2.6.22.19/arch/arm/mach-at91/board-kb9202.c @@ -37,6 +37,8 @@ #include <asm/arch/board.h> #include <asm/arch/gpio.h> @@ -4900,7 +4922,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-kb9202.c linux-2.6.22-rc5.ne #include "generic.h" -@@ -111,6 +113,48 @@ +@@ -111,6 +113,48 @@ static struct at91_nand_data __initdata .partition_info = nand_partitions, }; @@ -4949,7 +4971,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-kb9202.c linux-2.6.22-rc5.ne static void __init kb9202_board_init(void) { /* Serial */ -@@ -129,6 +173,8 @@ +@@ -129,6 +173,8 @@ static void __init kb9202_board_init(voi at91_add_device_spi(NULL, 0); /* NAND */ at91_add_device_nand(&kb9202_nand_data); @@ -4958,9 +4980,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-kb9202.c linux-2.6.22-rc5.ne } MACHINE_START(KB9200, "KB920x") -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9261ek.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-sam9261ek.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9261ek.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-sam9261ek.c 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/mach-at91/board-sam9261ek.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/board-sam9261ek.c ++++ linux-2.6.22.19/arch/arm/mach-at91/board-sam9261ek.c @@ -27,6 +27,9 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -4971,7 +4994,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9261ek.c linux-2.6.22-rc5 #include <asm/hardware.h> #include <asm/setup.h> -@@ -251,6 +254,7 @@ +@@ -251,6 +254,7 @@ static struct spi_board_info ek_spi_devi .bus_num = 0, .platform_data = &ads_info, .irq = AT91SAM9261_ID_IRQ0, @@ -4979,7 +5002,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9261ek.c linux-2.6.22-rc5 }, #endif #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) -@@ -271,6 +275,65 @@ +@@ -271,6 +275,65 @@ static struct spi_board_info ek_spi_devi }; @@ -5045,7 +5068,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9261ek.c linux-2.6.22-rc5 static void __init ek_board_init(void) { /* Serial */ -@@ -296,6 +359,8 @@ +@@ -296,6 +359,8 @@ static void __init ek_board_init(void) /* MMC */ at91_add_device_mmc(0, &ek_mmc_data); #endif @@ -5054,9 +5077,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9261ek.c linux-2.6.22-rc5 } MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9263ek.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-sam9263ek.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9263ek.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-sam9263ek.c 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/mach-at91/board-sam9263ek.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/board-sam9263ek.c ++++ linux-2.6.22.19/arch/arm/mach-at91/board-sam9263ek.c @@ -26,6 +26,9 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> @@ -5067,7 +5091,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9263ek.c linux-2.6.22-rc5 #include <asm/hardware.h> #include <asm/setup.h> -@@ -202,6 +205,65 @@ +@@ -202,6 +205,65 @@ static struct at91_nand_data __initdata /* @@ -5133,7 +5157,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9263ek.c linux-2.6.22-rc5 * AC97 */ static struct atmel_ac97_data ek_ac97_data = { -@@ -230,6 +292,8 @@ +@@ -230,6 +292,8 @@ static void __init ek_board_init(void) at91_add_device_nand(&ek_nand_data); /* I2C */ at91_add_device_i2c(); @@ -5142,9 +5166,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9263ek.c linux-2.6.22-rc5 /* AC97 */ at91_add_device_ac97(&ek_ac97_data); } -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/clock.c linux-2.6.22-rc5.new/arch/arm/mach-at91/clock.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/clock.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/clock.c 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/mach-at91/clock.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/clock.c ++++ linux-2.6.22.19/arch/arm/mach-at91/clock.c @@ -32,6 +32,7 @@ #include <asm/arch/cpu.h> @@ -5153,7 +5178,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/clock.c linux-2.6.22-rc5.new/arch/ /* -@@ -254,6 +255,23 @@ +@@ -254,6 +255,23 @@ EXPORT_SYMBOL(clk_get_rate); /*------------------------------------------------------------------------*/ @@ -5177,10 +5202,11 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/clock.c linux-2.6.22-rc5.new/arch/ #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS /* -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/generic.h linux-2.6.22-rc5.new/arch/arm/mach-at91/generic.h ---- linux-2.6.22-rc5/arch/arm/mach-at91/generic.h 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/generic.h 2007-07-29 05:23:04.000000000 +0200 -@@ -36,6 +36,7 @@ +Index: linux-2.6.22.19/arch/arm/mach-at91/generic.h +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/generic.h ++++ linux-2.6.22.19/arch/arm/mach-at91/generic.h +@@ -36,6 +36,7 @@ extern void __init at91_clock_associate( /* Power Management */ extern void at91_irq_suspend(void); extern void at91_irq_resume(void); @@ -5188,9 +5214,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/generic.h linux-2.6.22-rc5.new/arc /* GPIO */ #define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */ -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/ics1523.c linux-2.6.22-rc5.new/arch/arm/mach-at91/ics1523.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/ics1523.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/ics1523.c 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/mach-at91/ics1523.c +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/arch/arm/mach-at91/ics1523.c @@ -0,0 +1,207 @@ +/* + * arch/arm/mach-at91rm9200/ics1523.c @@ -5399,10 +5426,11 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/ics1523.c linux-2.6.22-rc5.new/arc + + return ack; +} -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/Kconfig linux-2.6.22-rc5.new/arch/arm/mach-at91/Kconfig ---- linux-2.6.22-rc5/arch/arm/mach-at91/Kconfig 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/Kconfig 2007-07-29 05:23:04.000000000 +0200 -@@ -97,6 +97,12 @@ +Index: linux-2.6.22.19/arch/arm/mach-at91/Kconfig +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/Kconfig ++++ linux-2.6.22.19/arch/arm/mach-at91/Kconfig +@@ -97,6 +97,12 @@ config MACH_KAFA help Select this if you are using Sperry-Sun's KAFA board. @@ -5415,7 +5443,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/Kconfig linux-2.6.22-rc5.new/arch/ endif # ---------------------------------------------------------- -@@ -121,6 +127,13 @@ +@@ -121,6 +127,13 @@ config MACH_AT91SAM9260EK Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> @@ -5429,7 +5457,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/Kconfig linux-2.6.22-rc5.new/arch/ endif # ---------------------------------------------------------- -@@ -184,6 +197,20 @@ +@@ -184,6 +197,20 @@ config MTD_NAND_AT91_BUSWIDTH_16 On AT91SAM926x boards both types of NAND flash can be present (8 and 16 bit data bus width). @@ -5450,7 +5478,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/Kconfig linux-2.6.22-rc5.new/arch/ # ---------------------------------------------------------- comment "AT91 Feature Selections" -@@ -194,6 +221,20 @@ +@@ -194,6 +221,20 @@ config AT91_PROGRAMMABLE_CLOCKS Select this if you need to program one or more of the PCK0..PCK3 programmable clock outputs. @@ -5471,10 +5499,11 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/Kconfig linux-2.6.22-rc5.new/arch/ endmenu endif -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/Makefile linux-2.6.22-rc5.new/arch/arm/mach-at91/Makefile ---- linux-2.6.22-rc5/arch/arm/mach-at91/Makefile 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/Makefile 2007-07-29 05:23:04.000000000 +0200 -@@ -8,6 +8,8 @@ +Index: linux-2.6.22.19/arch/arm/mach-at91/Makefile +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/Makefile ++++ linux-2.6.22.19/arch/arm/mach-at91/Makefile +@@ -8,6 +8,8 @@ obj-n := obj- := obj-$(CONFIG_PM) += pm.o @@ -5483,7 +5512,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/Makefile linux-2.6.22-rc5.new/arch # CPU-specific support obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o -@@ -26,10 +28,12 @@ +@@ -26,10 +28,12 @@ obj-$(CONFIG_MACH_CARMEVA) += board-carm obj-$(CONFIG_MACH_KB9200) += board-kb9202.o obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o obj-$(CONFIG_MACH_KAFA) += board-kafa.o @@ -5496,7 +5525,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/Makefile linux-2.6.22-rc5.new/arch # AT91SAM9261 board-specific support obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o -@@ -51,7 +55,7 @@ +@@ -51,7 +55,7 @@ led-$(CONFIG_MACH_KAFA) += leds.o obj-$(CONFIG_LEDS) += $(led-y) # VGA support @@ -5505,10 +5534,11 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/Makefile linux-2.6.22-rc5.new/arch ifeq ($(CONFIG_PM_DEBUG),y) -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/pm.c linux-2.6.22-rc5.new/arch/arm/mach-at91/pm.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/pm.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/pm.c 2007-07-29 05:23:04.000000000 +0200 -@@ -63,6 +63,7 @@ +Index: linux-2.6.22.19/arch/arm/mach-at91/pm.c +=================================================================== +--- linux-2.6.22.19.orig/arch/arm/mach-at91/pm.c ++++ linux-2.6.22.19/arch/arm/mach-at91/pm.c +@@ -63,6 +63,7 @@ static int at91_pm_set_target(suspend_st * Verify that all the clocks are correct before entering * slow-clock mode. */ @@ -5516,7 +5546,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/pm.c linux-2.6.22-rc5.new/arch/arm static int at91_pm_verify_clocks(void) { unsigned long scsr; -@@ -103,20 +104,15 @@ +@@ -103,20 +104,15 @@ static int at91_pm_verify_clocks(void) } /* @@ -5538,7 +5568,7 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/pm.c linux-2.6.22-rc5.new/arch/arm static void (*slow_clock)(void); -@@ -205,16 +201,23 @@ +@@ -205,16 +201,23 @@ static struct pm_ops at91_pm_ops ={ .enter = at91_pm_enter, }; @@ -5567,9 +5597,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/pm.c linux-2.6.22-rc5.new/arch/arm #endif /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */ -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/pm.c.orig linux-2.6.22-rc5.new/arch/arm/mach-at91/pm.c.orig ---- linux-2.6.22-rc5/arch/arm/mach-at91/pm.c.orig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/pm.c.orig 2007-06-17 04:09:12.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/mach-at91/pm.c.orig +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/arch/arm/mach-at91/pm.c.orig @@ -0,0 +1,227 @@ +/* + * arch/arm/mach-at91/pm.c @@ -5798,9 +5829,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/pm.c.orig linux-2.6.22-rc5.new/arc + return 0; +} +arch_initcall(at91_pm_init); -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/pm_slowclock.S linux-2.6.22-rc5.new/arch/arm/mach-at91/pm_slowclock.S ---- linux-2.6.22-rc5/arch/arm/mach-at91/pm_slowclock.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/pm_slowclock.S 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/mach-at91/pm_slowclock.S +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/arch/arm/mach-at91/pm_slowclock.S @@ -0,0 +1,172 @@ +/* + * arch/arm/mach-at91/pm_slow_clock.S @@ -5974,9 +6006,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/pm_slowclock.S linux-2.6.22-rc5.ne + +ENTRY(at91rm9200_slow_clock_sz) + .word .-at91rm9200_slow_clock -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/tclib.c linux-2.6.22-rc5.new/arch/arm/mach-at91/tclib.c ---- linux-2.6.22-rc5/arch/arm/mach-at91/tclib.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/tclib.c 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/mach-at91/tclib.c +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/arch/arm/mach-at91/tclib.c @@ -0,0 +1,17 @@ +#include <linux/clk.h> +#include <linux/kernel.h> @@ -5995,9 +6028,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/tclib.c linux-2.6.22-rc5.new/arch/ + blocks = tcblocks; + nblocks = n; +} -diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/tclib.h linux-2.6.22-rc5.new/arch/arm/mach-at91/tclib.h ---- linux-2.6.22-rc5/arch/arm/mach-at91/tclib.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/tclib.h 2007-07-29 05:23:04.000000000 +0200 +Index: linux-2.6.22.19/arch/arm/mach-at91/tclib.h +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/arch/arm/mach-at91/tclib.h @@ -0,0 +1,11 @@ + +#define TC_PER_TCB 3 @@ -6010,9 +6044,10 @@ diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/tclib.h linux-2.6.22-rc5.new/arch/ +}; + +extern void __init atmel_tc_init(struct atmel_tcblock *tcblocks, int n); -diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/at91_mci.h linux-2.6-stable/include/asm-arm/arch-at91/at91_mci.h ---- linux-2.6.22-rc1/include/asm-arm/arch-at91/at91_mci.h Thu Apr 26 05:08:32 2007 -+++ linux-2.6-stable/include/asm-arm/arch-at91/at91_mci.h Tue May 8 12:13:31 2007 +Index: linux-2.6.22.19/include/asm-arm/arch-at91/at91_mci.h +=================================================================== +--- linux-2.6.22.19.orig/include/asm-arm/arch-at91/at91_mci.h ++++ linux-2.6.22.19/include/asm-arm/arch-at91/at91_mci.h @@ -26,6 +26,9 @@ #define AT91_MCI_MR 0x04 /* Mode Register */ #define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */ @@ -6023,9 +6058,10 @@ diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/at91_mci.h linux-2.6 #define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */ #define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */ #define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */ -diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/at91_pmc.h linux-2.6-stable/include/asm-arm/arch-at91/at91_pmc.h ---- linux-2.6.22-rc1/include/asm-arm/arch-at91/at91_pmc.h Thu Apr 26 05:08:32 2007 -+++ linux-2.6-stable/include/asm-arm/arch-at91/at91_pmc.h Fri May 11 16:45:00 2007 +Index: linux-2.6.22.19/include/asm-arm/arch-at91/at91_pmc.h +=================================================================== +--- linux-2.6.22.19.orig/include/asm-arm/arch-at91/at91_pmc.h ++++ linux-2.6.22.19/include/asm-arm/arch-at91/at91_pmc.h @@ -37,7 +37,9 @@ #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ @@ -6037,9 +6073,10 @@ diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/at91_pmc.h linux-2.6 #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ #define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */ #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ -diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/at91sam9260_matrix.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260_matrix.h ---- linux-2.6.22-rc1/include/asm-arm/arch-at91/at91sam9260_matrix.h Thu Apr 26 05:08:32 2007 -+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260_matrix.h Fri May 11 16:20:33 2007 +Index: linux-2.6.22.19/include/asm-arm/arch-at91/at91sam9260_matrix.h +=================================================================== +--- linux-2.6.22.19.orig/include/asm-arm/arch-at91/at91sam9260_matrix.h ++++ linux-2.6.22.19/include/asm-arm/arch-at91/at91sam9260_matrix.h @@ -67,7 +67,7 @@ #define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ #define AT91_MATRIX_CS4A_SMC (0 << 4) @@ -6049,10 +6086,11 @@ diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/at91sam9260_matrix.h #define AT91_MATRIX_CS5A_SMC (0 << 5) #define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) #define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/board.h linux-2.6-stable/include/asm-arm/arch-at91/board.h ---- linux-2.6.22-rc1/include/asm-arm/arch-at91/board.h Thu May 17 12:13:17 2007 -+++ linux-2.6-stable/include/asm-arm/arch-at91/board.h Thu May 10 12:21:10 2007 -@@ -124,9 +124,21 @@ +Index: linux-2.6.22.19/include/asm-arm/arch-at91/board.h +=================================================================== +--- linux-2.6.22.19.orig/include/asm-arm/arch-at91/board.h ++++ linux-2.6.22.19/include/asm-arm/arch-at91/board.h +@@ -124,9 +124,21 @@ struct atmel_ac97_data { }; extern void __init at91_add_device_ac97(struct atmel_ac97_data *data); @@ -6074,9 +6112,10 @@ diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/board.h linux-2.6-st +extern void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr); + #endif -diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/ics1523.h linux-2.6-stable/include/asm-arm/arch-at91/ics1523.h ---- linux-2.6.22-rc1/include/asm-arm/arch-at91/ics1523.h Thu Jan 1 02:00:00 1970 -+++ linux-2.6-stable/include/asm-arm/arch-at91/ics1523.h Mon May 14 13:49:47 2007 +Index: linux-2.6.22.19/include/asm-arm/arch-at91/ics1523.h +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/include/asm-arm/arch-at91/ics1523.h @@ -0,0 +1,154 @@ +//*---------------------------------------------------------------------------- +//* ATMEL Microcontroller Software Support - ROUSSET - @@ -6232,9 +6271,10 @@ diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/ics1523.h linux-2.6- +int at91_ics1523_init(void); + +#endif /* ics1523_h */ -diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/spi.h linux-2.6-stable/include/asm-arm/arch-at91/spi.h ---- linux-2.6.22-rc1/include/asm-arm/arch-at91/spi.h Thu Jan 1 02:00:00 1970 -+++ linux-2.6-stable/include/asm-arm/arch-at91/spi.h Mon May 14 13:49:47 2007 +Index: linux-2.6.22.19/include/asm-arm/arch-at91/spi.h +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/include/asm-arm/arch-at91/spi.h @@ -0,0 +1,54 @@ +/* + * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 @@ -6290,10 +6330,11 @@ diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/spi.h linux-2.6-stab +extern int spi_transfer(struct spi_transfer_list* list); + +#endif -diff -urN -x CVS linux-2.6.22-rc1/include/linux/clk.h linux-2.6-stable/include/linux/clk.h ---- linux-2.6.22-rc1/include/linux/clk.h Thu Apr 26 05:08:32 2007 -+++ linux-2.6-stable/include/linux/clk.h Tue May 8 12:13:31 2007 -@@ -121,4 +121,24 @@ +Index: linux-2.6.22.19/include/linux/clk.h +=================================================================== +--- linux-2.6.22.19.orig/include/linux/clk.h ++++ linux-2.6.22.19/include/linux/clk.h +@@ -121,4 +121,24 @@ int clk_set_parent(struct clk *clk, stru */ struct clk *clk_get_parent(struct clk *clk); @@ -6318,9 +6359,10 @@ diff -urN -x CVS linux-2.6.22-rc1/include/linux/clk.h linux-2.6-stable/include/l +int clk_must_disable(struct clk *clk); + #endif -diff -urN -x CVS linux-2.6.22-rc1/include/linux/i2c-id.h linux-2.6-stable/include/linux/i2c-id.h ---- linux-2.6.22-rc1/include/linux/i2c-id.h Thu May 17 12:13:23 2007 -+++ linux-2.6-stable/include/linux/i2c-id.h Mon May 14 10:18:35 2007 +Index: linux-2.6.22.19/include/linux/i2c-id.h +=================================================================== +--- linux-2.6.22.19.orig/include/linux/i2c-id.h ++++ linux-2.6.22.19/include/linux/i2c-id.h @@ -203,6 +203,7 @@ /* --- PCA 9564 based algorithms */ @@ -6329,9 +6371,10 @@ diff -urN -x CVS linux-2.6.22-rc1/include/linux/i2c-id.h linux-2.6-stable/includ /* --- ACPI Embedded controller algorithms */ #define I2C_HW_ACPI_EC 0x1f0000 -diff -urN -x CVS linux-2.6.22-rc1/sound/soc/at91/eti_b1_wm8731.c linux-2.6-stable/sound/soc/at91/eti_b1_wm8731.c ---- linux-2.6.22-rc1/sound/soc/at91/eti_b1_wm8731.c Thu May 17 12:13:36 2007 -+++ linux-2.6-stable/sound/soc/at91/eti_b1_wm8731.c Mon May 14 10:19:04 2007 +Index: linux-2.6.22.19/sound/soc/at91/eti_b1_wm8731.c +=================================================================== +--- linux-2.6.22.19.orig/sound/soc/at91/eti_b1_wm8731.c ++++ linux-2.6.22.19/sound/soc/at91/eti_b1_wm8731.c @@ -34,8 +34,7 @@ #include <sound/soc.h> #include <sound/soc-dapm.h> @@ -6356,7 +6399,7 @@ diff -urN -x CVS linux-2.6.22-rc1/sound/soc/at91/eti_b1_wm8731.c linux-2.6-stabl static struct clk *pck1_clk; static struct clk *pllb_clk; -@@ -277,7 +269,6 @@ +@@ -277,7 +269,6 @@ static struct platform_device *eti_b1_sn static int __init eti_b1_init(void) { int ret; @@ -6364,7 +6407,7 @@ diff -urN -x CVS linux-2.6.22-rc1/sound/soc/at91/eti_b1_wm8731.c linux-2.6-stabl struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data; if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) { -@@ -311,19 +302,12 @@ +@@ -311,19 +302,12 @@ static int __init eti_b1_init(void) goto fail_io_unmap; } @@ -6390,9 +6433,10 @@ diff -urN -x CVS linux-2.6.22-rc1/sound/soc/at91/eti_b1_wm8731.c linux-2.6-stabl /* * Set PCK1 parent to PLLB and its rate to 12 Mhz. -diff -urN linux-2.6.22-rc5/drivers/char/at91_spi.c linux-2.6.22-rc5.new/drivers/char/at91_spi.c ---- linux-2.6.22-rc5/drivers/char/at91_spi.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.22-rc5.new/drivers/char/at91_spi.c 2007-07-29 05:55:39.000000000 +0200 +Index: linux-2.6.22.19/drivers/char/at91_spi.c +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/drivers/char/at91_spi.c @@ -0,0 +1,336 @@ +/* + * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder) @@ -6730,9 +6774,10 @@ diff -urN linux-2.6.22-rc5/drivers/char/at91_spi.c linux-2.6.22-rc5.new/drivers/ +MODULE_LICENSE("GPL") +MODULE_AUTHOR("Andrew Victor") +MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200") -diff -urN linux-2.6.22-rc5/drivers/char/at91_spidev.c linux-2.6.22-rc5.new/drivers/char/at91_spidev.c ---- linux-2.6.22-rc5/drivers/char/at91_spidev.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.22-rc5.new/drivers/char/at91_spidev.c 2007-07-29 05:55:39.000000000 +0200 +Index: linux-2.6.22.19/drivers/char/at91_spidev.c +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/drivers/char/at91_spidev.c @@ -0,0 +1,236 @@ +/* + * User-space interface to the SPI bus on Atmel AT91RM9200 @@ -6970,10 +7015,11 @@ diff -urN linux-2.6.22-rc5/drivers/char/at91_spidev.c linux-2.6.22-rc5.new/drive +MODULE_LICENSE("GPL") +MODULE_AUTHOR("Andrew Victor") +MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200") -diff -urN linux-2.6.22-rc5/drivers/char/Kconfig linux-2.6.22-rc5.new/drivers/char/Kconfig ---- linux-2.6.22-rc5/drivers/char/Kconfig 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/char/Kconfig 2007-07-29 05:55:39.000000000 +0200 -@@ -1083,5 +1083,21 @@ +Index: linux-2.6.22.19/drivers/char/Kconfig +=================================================================== +--- linux-2.6.22.19.orig/drivers/char/Kconfig ++++ linux-2.6.22.19/drivers/char/Kconfig +@@ -1083,5 +1083,21 @@ config DEVPORT source "drivers/s390/char/Kconfig" @@ -6995,10 +7041,11 @@ diff -urN linux-2.6.22-rc5/drivers/char/Kconfig linux-2.6.22-rc5.new/drivers/cha + endmenu -diff -urN linux-2.6.22-rc5/drivers/char/Makefile linux-2.6.22-rc5.new/drivers/char/Makefile ---- linux-2.6.22-rc5/drivers/char/Makefile 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/char/Makefile 2007-07-29 05:55:39.000000000 +0200 -@@ -93,6 +93,8 @@ +Index: linux-2.6.22.19/drivers/char/Makefile +=================================================================== +--- linux-2.6.22.19.orig/drivers/char/Makefile ++++ linux-2.6.22.19/drivers/char/Makefile +@@ -93,6 +93,8 @@ obj-$(CONFIG_CS5535_GPIO) += cs5535_gpio obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o obj-$(CONFIG_GPIO_TB0219) += tb0219.o obj-$(CONFIG_TELCLOCK) += tlclk.o @@ -7007,9 +7054,10 @@ diff -urN linux-2.6.22-rc5/drivers/char/Makefile linux-2.6.22-rc5.new/drivers/ch obj-$(CONFIG_WATCHDOG) += watchdog/ obj-$(CONFIG_MWAVE) += mwave/ -diff -urN linux-2.6.22-rc5/drivers/i2c/busses/i2c-at91.c linux-2.6.22-rc5.new/drivers/i2c/busses/i2c-at91.c ---- linux-2.6.22-rc5/drivers/i2c/busses/i2c-at91.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/i2c/busses/i2c-at91.c 2007-07-29 05:55:39.000000000 +0200 +Index: linux-2.6.22.19/drivers/i2c/busses/i2c-at91.c +=================================================================== +--- linux-2.6.22.19.orig/drivers/i2c/busses/i2c-at91.c ++++ linux-2.6.22.19/drivers/i2c/busses/i2c-at91.c @@ -31,8 +31,11 @@ #include <asm/arch/board.h> #include <asm/arch/cpu.h> @@ -7023,7 +7071,7 @@ diff -urN linux-2.6.22-rc5/drivers/i2c/busses/i2c-at91.c linux-2.6.22-rc5.new/dr static struct clk *twi_clk; static void __iomem *twi_base; -@@ -53,7 +56,7 @@ +@@ -53,7 +56,7 @@ static void __devinit at91_twi_hwinit(vo at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */ /* Calcuate clock dividers */ @@ -7032,7 +7080,7 @@ diff -urN linux-2.6.22-rc5/drivers/i2c/busses/i2c-at91.c linux-2.6.22-rc5.new/dr cdiv = cdiv + 1; /* round up */ ckdiv = 0; while (cdiv > 255) { -@@ -61,11 +64,12 @@ +@@ -61,11 +64,12 @@ static void __devinit at91_twi_hwinit(vo cdiv = cdiv >> 1; } @@ -7050,9 +7098,10 @@ diff -urN linux-2.6.22-rc5/drivers/i2c/busses/i2c-at91.c linux-2.6.22-rc5.new/dr } at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv); -diff -urN linux-2.6.22-rc5/drivers/i2c/busses/i2c-pca.c linux-2.6.22-rc5.new/drivers/i2c/busses/i2c-pca.c ---- linux-2.6.22-rc5/drivers/i2c/busses/i2c-pca.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.22-rc5.new/drivers/i2c/busses/i2c-pca.c 2007-07-29 05:55:39.000000000 +0200 +Index: linux-2.6.22.19/drivers/i2c/busses/i2c-pca.c +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/drivers/i2c/busses/i2c-pca.c @@ -0,0 +1,213 @@ +/* + * Platform driver for PCA9564 I2C bus controller. @@ -7267,10 +7316,11 @@ diff -urN linux-2.6.22-rc5/drivers/i2c/busses/i2c-pca.c linux-2.6.22-rc5.new/dri +MODULE_AUTHOR("Andrew Victor"); +MODULE_DESCRIPTION("PCA9564 platform driver"); +MODULE_LICENSE("GPL"); -diff -urN linux-2.6.22-rc5/drivers/i2c/busses/Kconfig linux-2.6.22-rc5.new/drivers/i2c/busses/Kconfig ---- linux-2.6.22-rc5/drivers/i2c/busses/Kconfig 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/i2c/busses/Kconfig 2007-07-29 05:55:39.000000000 +0200 -@@ -80,6 +80,14 @@ +Index: linux-2.6.22.19/drivers/i2c/busses/Kconfig +=================================================================== +--- linux-2.6.22.19.orig/drivers/i2c/busses/Kconfig ++++ linux-2.6.22.19/drivers/i2c/busses/Kconfig +@@ -80,6 +80,14 @@ config I2C_AT91 This supports the use of the I2C interface on Atmel AT91 processors. @@ -7285,7 +7335,7 @@ diff -urN linux-2.6.22-rc5/drivers/i2c/busses/Kconfig linux-2.6.22-rc5.new/drive config I2C_AU1550 tristate "Au1550/Au1200 SMBus interface" depends on SOC_AU1550 || SOC_AU1200 -@@ -598,6 +606,14 @@ +@@ -598,6 +606,14 @@ config I2C_VOODOO3 This driver can also be built as a module. If so, the module will be called i2c-voodoo3. @@ -7300,10 +7350,11 @@ diff -urN linux-2.6.22-rc5/drivers/i2c/busses/Kconfig linux-2.6.22-rc5.new/drive config I2C_PCA_ISA tristate "PCA9564 on an ISA bus" depends on ISA -diff -urN linux-2.6.22-rc5/drivers/i2c/busses/Makefile linux-2.6.22-rc5.new/drivers/i2c/busses/Makefile ---- linux-2.6.22-rc5/drivers/i2c/busses/Makefile 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/i2c/busses/Makefile 2007-07-29 05:55:39.000000000 +0200 -@@ -30,6 +30,7 @@ +Index: linux-2.6.22.19/drivers/i2c/busses/Makefile +=================================================================== +--- linux-2.6.22.19.orig/drivers/i2c/busses/Makefile ++++ linux-2.6.22.19/drivers/i2c/busses/Makefile +@@ -30,6 +30,7 @@ obj-$(CONFIG_I2C_OMAP) += i2c-omap.o obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o @@ -7311,10 +7362,11 @@ diff -urN linux-2.6.22-rc5/drivers/i2c/busses/Makefile linux-2.6.22-rc5.new/driv obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o obj-$(CONFIG_I2C_PNX) += i2c-pnx.o -diff -urN linux-2.6.22-rc5/drivers/leds/Kconfig linux-2.6.22-rc5.new/drivers/leds/Kconfig ---- linux-2.6.22-rc5/drivers/leds/Kconfig 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/leds/Kconfig 2007-07-29 05:55:39.000000000 +0200 -@@ -77,6 +77,13 @@ +Index: linux-2.6.22.19/drivers/leds/Kconfig +=================================================================== +--- linux-2.6.22.19.orig/drivers/leds/Kconfig ++++ linux-2.6.22.19/drivers/leds/Kconfig +@@ -77,6 +77,13 @@ config LEDS_NET48XX This option enables support for the Soekris net4801 and net4826 error LED. @@ -7328,9 +7380,10 @@ diff -urN linux-2.6.22-rc5/drivers/leds/Kconfig linux-2.6.22-rc5.new/drivers/led config LEDS_WRAP tristate "LED Support for the WRAP series LEDs" depends on LEDS_CLASS && SCx200_GPIO -diff -urN linux-2.6.22-rc5/drivers/leds/leds-at91.c linux-2.6.22-rc5.new/drivers/leds/leds-at91.c ---- linux-2.6.22-rc5/drivers/leds/leds-at91.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.22-rc5.new/drivers/leds/leds-at91.c 2007-07-29 05:55:39.000000000 +0200 +Index: linux-2.6.22.19/drivers/leds/leds-at91.c +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/drivers/leds/leds-at91.c @@ -0,0 +1,140 @@ +/* + * AT91 GPIO based LED driver @@ -7472,10 +7525,11 @@ diff -urN linux-2.6.22-rc5/drivers/leds/leds-at91.c linux-2.6.22-rc5.new/drivers +MODULE_DESCRIPTION("AT91 GPIO LED driver"); +MODULE_AUTHOR("David Brownell"); +MODULE_LICENSE("GPL"); -diff -urN linux-2.6.22-rc5/drivers/leds/Makefile linux-2.6.22-rc5.new/drivers/leds/Makefile ---- linux-2.6.22-rc5/drivers/leds/Makefile 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/leds/Makefile 2007-07-29 05:55:39.000000000 +0200 -@@ -16,6 +16,7 @@ +Index: linux-2.6.22.19/drivers/leds/Makefile +=================================================================== +--- linux-2.6.22.19.orig/drivers/leds/Makefile ++++ linux-2.6.22.19/drivers/leds/Makefile +@@ -16,6 +16,7 @@ obj-$(CONFIG_LEDS_NET48XX) += leds-net4 obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o obj-$(CONFIG_LEDS_H1940) += leds-h1940.o obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o @@ -7483,9 +7537,10 @@ diff -urN linux-2.6.22-rc5/drivers/leds/Makefile linux-2.6.22-rc5.new/drivers/le # LED Triggers obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o -diff -urN linux-2.6.22-rc5/drivers/mmc/host/at91_mci.c linux-2.6.22-rc5.new/drivers/mmc/host/at91_mci.c ---- linux-2.6.22-rc5/drivers/mmc/host/at91_mci.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/mmc/host/at91_mci.c 2007-07-29 05:57:56.000000000 +0200 +Index: linux-2.6.22.19/drivers/mmc/host/at91_mci.c +=================================================================== +--- linux-2.6.22.19.orig/drivers/mmc/host/at91_mci.c ++++ linux-2.6.22.19/drivers/mmc/host/at91_mci.c @@ -85,7 +85,7 @@ #define AT91_MCI_ERRORS (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE \ @@ -7495,7 +7550,7 @@ diff -urN linux-2.6.22-rc5/drivers/mmc/host/at91_mci.c linux-2.6.22-rc5.new/driv #define at91_mci_read(host, reg) __raw_readl((host)->baseaddr + (reg)) #define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg)) -@@ -560,9 +560,7 @@ +@@ -560,9 +560,7 @@ static void at91mci_completed_command(st pr_debug("Status = %08X [%08X %08X %08X %08X]\n", status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]); @@ -7506,7 +7561,7 @@ diff -urN linux-2.6.22-rc5/drivers/mmc/host/at91_mci.c linux-2.6.22-rc5.new/driv if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) { cmd->error = MMC_ERR_NONE; } -@@ -663,15 +661,15 @@ +@@ -663,15 +661,15 @@ static irqreturn_t at91_mci_irq(int irq, int_status = at91_mci_read(host, AT91_MCI_SR); int_mask = at91_mci_read(host, AT91_MCI_IMR); @@ -7525,7 +7580,7 @@ diff -urN linux-2.6.22-rc5/drivers/mmc/host/at91_mci.c linux-2.6.22-rc5.new/driv if (int_status & AT91_MCI_UNRE) pr_debug("MMC: Underrun error\n"); if (int_status & AT91_MCI_OVRE) -@@ -819,7 +817,7 @@ +@@ -819,7 +817,7 @@ static int __init at91_mci_probe(struct mmc->f_min = 375000; mmc->f_max = 25000000; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; @@ -7534,7 +7589,7 @@ diff -urN linux-2.6.22-rc5/drivers/mmc/host/at91_mci.c linux-2.6.22-rc5.new/driv mmc->max_blk_size = 4095; mmc->max_blk_count = mmc->max_req_size; -@@ -893,6 +891,8 @@ +@@ -893,6 +891,8 @@ static int __init at91_mci_probe(struct mmc_add_host(mmc); @@ -7543,7 +7598,7 @@ diff -urN linux-2.6.22-rc5/drivers/mmc/host/at91_mci.c linux-2.6.22-rc5.new/driv /* * monitor card insertion/removal if we can */ -@@ -922,6 +922,8 @@ +@@ -922,6 +922,8 @@ static int __exit at91_mci_remove(struct host = mmc_priv(mmc); @@ -7552,7 +7607,7 @@ diff -urN linux-2.6.22-rc5/drivers/mmc/host/at91_mci.c linux-2.6.22-rc5.new/driv if (host->present != -1) { free_irq(host->board->det_pin, host); cancel_delayed_work(&host->mmc->detect); -@@ -949,8 +951,12 @@ +@@ -949,8 +951,12 @@ static int __exit at91_mci_remove(struct static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state) { struct mmc_host *mmc = platform_get_drvdata(pdev); @@ -7565,7 +7620,7 @@ diff -urN linux-2.6.22-rc5/drivers/mmc/host/at91_mci.c linux-2.6.22-rc5.new/driv if (mmc) ret = mmc_suspend_host(mmc, state); -@@ -960,8 +966,12 @@ +@@ -960,8 +966,12 @@ static int at91_mci_suspend(struct platf static int at91_mci_resume(struct platform_device *pdev) { struct mmc_host *mmc = platform_get_drvdata(pdev); @@ -7578,9 +7633,10 @@ diff -urN linux-2.6.22-rc5/drivers/mmc/host/at91_mci.c linux-2.6.22-rc5.new/driv if (mmc) ret = mmc_resume_host(mmc); -diff -urN linux-2.6.22-rc5/drivers/mtd/devices/at91_dataflash.c linux-2.6.22-rc5.new/drivers/mtd/devices/at91_dataflash.c ---- linux-2.6.22-rc5/drivers/mtd/devices/at91_dataflash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.22-rc5.new/drivers/mtd/devices/at91_dataflash.c 2007-07-29 05:55:39.000000000 +0200 +Index: linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c @@ -0,0 +1,667 @@ +/* + * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder) @@ -8249,10 +8305,11 @@ diff -urN linux-2.6.22-rc5/drivers/mtd/devices/at91_dataflash.c linux-2.6.22-rc5 +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Andrew Victor"); +MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200"); -diff -urN linux-2.6.22-rc5/drivers/mtd/devices/Kconfig linux-2.6.22-rc5.new/drivers/mtd/devices/Kconfig ---- linux-2.6.22-rc5/drivers/mtd/devices/Kconfig 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/mtd/devices/Kconfig 2007-07-29 05:55:39.000000000 +0200 -@@ -269,5 +269,11 @@ +Index: linux-2.6.22.19/drivers/mtd/devices/Kconfig +=================================================================== +--- linux-2.6.22.19.orig/drivers/mtd/devices/Kconfig ++++ linux-2.6.22.19/drivers/mtd/devices/Kconfig +@@ -269,5 +269,11 @@ config MTD_DOCPROBE_55AA LinuxBIOS or if you need to recover a DiskOnChip Millennium on which you have managed to wipe the first block. @@ -8265,18 +8322,20 @@ diff -urN linux-2.6.22-rc5/drivers/mtd/devices/Kconfig linux-2.6.22-rc5.new/driv + If you have such a board, say 'Y'. +endmenu -diff -urN linux-2.6.22-rc5/drivers/mtd/devices/Makefile linux-2.6.22-rc5.new/drivers/mtd/devices/Makefile ---- linux-2.6.22-rc5/drivers/mtd/devices/Makefile 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/mtd/devices/Makefile 2007-07-29 05:55:39.000000000 +0200 -@@ -18,3 +18,4 @@ +Index: linux-2.6.22.19/drivers/mtd/devices/Makefile +=================================================================== +--- linux-2.6.22.19.orig/drivers/mtd/devices/Makefile ++++ linux-2.6.22.19/drivers/mtd/devices/Makefile +@@ -18,3 +18,4 @@ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o obj-$(CONFIG_MTD_DATAFLASH26) += at91_dataflash26.o obj-$(CONFIG_MTD_M25P80) += m25p80.o +obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o -diff -urN linux-2.6.22-rc5/drivers/net/arm/at91_ether.c linux-2.6.22-rc5.new/drivers/net/arm/at91_ether.c ---- linux-2.6.22-rc5/drivers/net/arm/at91_ether.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/net/arm/at91_ether.c 2007-07-29 05:55:39.000000000 +0200 -@@ -894,6 +894,7 @@ +Index: linux-2.6.22.19/drivers/net/arm/at91_ether.c +=================================================================== +--- linux-2.6.22.19.orig/drivers/net/arm/at91_ether.c ++++ linux-2.6.22.19/drivers/net/arm/at91_ether.c +@@ -894,6 +894,7 @@ static void at91ether_rx(struct net_devi skb_reserve(skb, 2); memcpy(skb_put(skb, pktlen), p_recv, pktlen); @@ -8284,7 +8343,7 @@ diff -urN linux-2.6.22-rc5/drivers/net/arm/at91_ether.c linux-2.6.22-rc5.new/dri skb->protocol = eth_type_trans(skb, dev); dev->last_rx = jiffies; lp->stats.rx_bytes += pktlen; -@@ -978,14 +979,22 @@ +@@ -978,14 +979,22 @@ static int __init at91ether_setup(unsign struct net_device *dev; struct at91_private *lp; unsigned int val; @@ -8310,7 +8369,7 @@ diff -urN linux-2.6.22-rc5/drivers/net/arm/at91_ether.c linux-2.6.22-rc5.new/dri SET_MODULE_OWNER(dev); /* Install the interrupt handler */ -@@ -1058,12 +1067,12 @@ +@@ -1058,12 +1067,12 @@ static int __init at91ether_setup(unsign lp->phy_address = phy_address; /* MDI address of PHY */ /* Register the network interface */ @@ -8326,9 +8385,10 @@ diff -urN linux-2.6.22-rc5/drivers/net/arm/at91_ether.c linux-2.6.22-rc5.new/dri } /* Determine current link speed */ -diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/drivers/serial/atmel_serial.c ---- linux-2.6.22-rc5/drivers/serial/atmel_serial.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/serial/atmel_serial.c 2007-07-29 05:55:39.000000000 +0200 +Index: linux-2.6.22.19/drivers/serial/atmel_serial.c +=================================================================== +--- linux-2.6.22.19.orig/drivers/serial/atmel_serial.c ++++ linux-2.6.22.19/drivers/serial/atmel_serial.c @@ -7,6 +7,8 @@ * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd. * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. @@ -8372,7 +8432,7 @@ diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/dr /* * We wrap our port structure around the generic uart_port. */ -@@ -114,10 +129,20 @@ +@@ -114,10 +129,20 @@ struct atmel_uart_port { struct uart_port uart; /* uart */ struct clk *clk; /* uart clock */ unsigned short suspended; /* is port suspended? */ @@ -8393,7 +8453,7 @@ diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/dr #ifdef SUPPORT_SYSRQ static struct console atmel_console; #endif -@@ -205,7 +230,12 @@ +@@ -205,7 +230,12 @@ static void atmel_stop_tx(struct uart_po { struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; @@ -8407,7 +8467,7 @@ diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/dr } /* -@@ -215,7 +245,17 @@ +@@ -215,7 +245,17 @@ static void atmel_start_tx(struct uart_p { struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; @@ -8426,7 +8486,7 @@ diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/dr } /* -@@ -225,7 +265,12 @@ +@@ -225,7 +265,12 @@ static void atmel_stop_rx(struct uart_po { struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; @@ -8440,7 +8500,7 @@ diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/dr } /* -@@ -248,6 +293,134 @@ +@@ -248,6 +293,134 @@ static void atmel_break_ctl(struct uart_ } /* @@ -8575,7 +8635,7 @@ diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/dr * Characters received (called from interrupt handler) */ static void atmel_rx_chars(struct uart_port *port) -@@ -349,6 +522,14 @@ +@@ -349,6 +522,14 @@ static irqreturn_t atmel_interrupt(int i status = UART_GET_CSR(port); pending = status & UART_GET_IMR(port); while (pending) { @@ -8590,7 +8650,7 @@ diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/dr /* Interrupt receive */ if (pending & ATMEL_US_RXRDY) atmel_rx_chars(port); -@@ -363,6 +544,12 @@ +@@ -363,6 +544,12 @@ static irqreturn_t atmel_interrupt(int i if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC)) wake_up_interruptible(&port->info->delta_msr_wait); @@ -8603,7 +8663,7 @@ diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/dr /* Interrupt transmit */ if (pending & ATMEL_US_TXRDY) atmel_tx_chars(port); -@@ -401,6 +588,47 @@ +@@ -401,6 +588,47 @@ static int atmel_startup(struct uart_por } /* @@ -8651,7 +8711,7 @@ diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/dr * If there is a specific "open" function (to register * control line interrupts) */ -@@ -418,7 +646,15 @@ +@@ -418,7 +646,15 @@ static int atmel_startup(struct uart_por UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); /* enable xmit & rcvr */ @@ -8668,7 +8728,7 @@ diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/dr return 0; } -@@ -431,6 +667,31 @@ +@@ -431,6 +667,31 @@ static void atmel_shutdown(struct uart_p struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; /* @@ -8700,7 +8760,7 @@ diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/dr * Disable all interrupts, port and break condition. */ UART_PUT_CR(port, ATMEL_US_RSTSTA); -@@ -481,6 +742,7 @@ +@@ -481,6 +742,7 @@ static void atmel_serial_pm(struct uart_ */ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old) { @@ -8708,7 +8768,7 @@ diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/dr unsigned long flags; unsigned int mode, imr, quot, baud; -@@ -490,7 +752,7 @@ +@@ -490,7 +752,7 @@ static void atmel_set_termios(struct uar baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); quot = uart_get_divisor(port, baud); @@ -8717,7 +8777,7 @@ diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/dr quot /= 8; mode |= ATMEL_US_USCLKS_MCK_DIV8; } -@@ -539,6 +801,9 @@ +@@ -539,6 +801,9 @@ static void atmel_set_termios(struct uar if (termios->c_iflag & (BRKINT | PARMRK)) port->read_status_mask |= ATMEL_US_RXBRK; @@ -8727,7 +8787,7 @@ diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/dr /* * Characters to ignore */ -@@ -717,6 +982,13 @@ +@@ -717,6 +982,13 @@ static void __devinit atmel_init_port(st clk_enable(atmel_port->clk); port->uartclk = clk_get_rate(atmel_port->clk); } @@ -8741,7 +8801,7 @@ diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/dr } /* -@@ -893,7 +1165,8 @@ +@@ -893,7 +1165,8 @@ static int atmel_serial_suspend(struct p struct uart_port *port = platform_get_drvdata(pdev); struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; @@ -8751,10 +8811,11 @@ diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/dr enable_irq_wake(port->irq); else { uart_suspend_port(&atmel_uart, port); -diff -urN linux-2.6.22-rc5/drivers/spi/Kconfig linux-2.6.22-rc5.new/drivers/spi/Kconfig ---- linux-2.6.22-rc5/drivers/spi/Kconfig 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/spi/Kconfig 2007-07-29 05:55:39.000000000 +0200 -@@ -55,6 +55,7 @@ +Index: linux-2.6.22.19/drivers/spi/Kconfig +=================================================================== +--- linux-2.6.22.19.orig/drivers/spi/Kconfig ++++ linux-2.6.22.19/drivers/spi/Kconfig +@@ -55,6 +55,7 @@ comment "SPI Master Controller Drivers" config SPI_ATMEL tristate "Atmel SPI Controller" depends on (ARCH_AT91 || AVR32) && SPI_MASTER @@ -8762,7 +8823,7 @@ diff -urN linux-2.6.22-rc5/drivers/spi/Kconfig linux-2.6.22-rc5.new/drivers/spi/ help This selects a driver for the Atmel SPI Controller, present on many AT32 (AVR32) and AT91 (ARM) chips. -@@ -100,6 +101,24 @@ +@@ -100,6 +101,24 @@ config SPI_BUTTERFLY inexpensive battery powered microcontroller evaluation board. This same cable can be used to flash new firmware. @@ -8787,10 +8848,11 @@ diff -urN linux-2.6.22-rc5/drivers/spi/Kconfig linux-2.6.22-rc5.new/drivers/spi/ config SPI_IMX tristate "Freescale iMX SPI controller" depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL -diff -urN linux-2.6.22-rc5/drivers/spi/Makefile linux-2.6.22-rc5.new/drivers/spi/Makefile ---- linux-2.6.22-rc5/drivers/spi/Makefile 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/spi/Makefile 2007-07-29 05:55:39.000000000 +0200 -@@ -23,6 +23,7 @@ +Index: linux-2.6.22.19/drivers/spi/Makefile +=================================================================== +--- linux-2.6.22.19.orig/drivers/spi/Makefile ++++ linux-2.6.22.19/drivers/spi/Makefile +@@ -23,6 +23,7 @@ obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52x obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o @@ -8798,9 +8860,10 @@ diff -urN linux-2.6.22-rc5/drivers/spi/Makefile linux-2.6.22-rc5.new/drivers/spi # ... add above this line ... # SPI protocol drivers (device/link on bus) -diff -urN linux-2.6.22-rc5/drivers/spi/spi_at91_bitbang.c linux-2.6.22-rc5.new/drivers/spi/spi_at91_bitbang.c ---- linux-2.6.22-rc5/drivers/spi/spi_at91_bitbang.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.22-rc5.new/drivers/spi/spi_at91_bitbang.c 2007-07-29 05:55:39.000000000 +0200 +Index: linux-2.6.22.19/drivers/spi/spi_at91_bitbang.c +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/drivers/spi/spi_at91_bitbang.c @@ -0,0 +1,207 @@ +/* + * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION) @@ -9009,10 +9072,11 @@ diff -urN linux-2.6.22-rc5/drivers/spi/spi_at91_bitbang.c linux-2.6.22-rc5.new/d +MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)"); +MODULE_AUTHOR("David Brownell"); +MODULE_LICENSE("GPL"); -diff -urN linux-2.6.22-rc5/drivers/usb/gadget/at91_udc.c linux-2.6.22-rc5.new/drivers/usb/gadget/at91_udc.c ---- linux-2.6.22-rc5/drivers/usb/gadget/at91_udc.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/usb/gadget/at91_udc.c 2007-07-29 05:55:39.000000000 +0200 -@@ -1803,7 +1803,7 @@ +Index: linux-2.6.22.19/drivers/usb/gadget/at91_udc.c +=================================================================== +--- linux-2.6.22.19.orig/drivers/usb/gadget/at91_udc.c ++++ linux-2.6.22.19/drivers/usb/gadget/at91_udc.c +@@ -1803,7 +1803,7 @@ static int at91udc_suspend(struct platfo */ if ((!udc->suspended && udc->addr) || !wake @@ -9021,10 +9085,11 @@ diff -urN linux-2.6.22-rc5/drivers/usb/gadget/at91_udc.c linux-2.6.22-rc5.new/dr pullup(udc, 0); wake = 0; } else -diff -urN linux-2.6.22-rc5/drivers/usb/host/ohci-at91.c linux-2.6.22-rc5.new/drivers/usb/host/ohci-at91.c ---- linux-2.6.22-rc5/drivers/usb/host/ohci-at91.c 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/usb/host/ohci-at91.c 2007-07-29 05:55:39.000000000 +0200 -@@ -299,7 +299,7 @@ +Index: linux-2.6.22.19/drivers/usb/host/ohci-at91.c +=================================================================== +--- linux-2.6.22.19.orig/drivers/usb/host/ohci-at91.c ++++ linux-2.6.22.19/drivers/usb/host/ohci-at91.c +@@ -299,7 +299,7 @@ ohci_hcd_at91_drv_suspend(struct platfor * * REVISIT: some boards will be able to turn VBUS off... */ @@ -9033,9 +9098,10 @@ diff -urN linux-2.6.22-rc5/drivers/usb/host/ohci-at91.c linux-2.6.22-rc5.new/dri ohci_usb_reset (ohci); at91_stop_clock(); } -diff -urN linux-2.6.22-rc5/drivers/video/backlight/kb920x_bl.c linux-2.6.22-rc5.new/drivers/video/backlight/kb920x_bl.c ---- linux-2.6.22-rc5/drivers/video/backlight/kb920x_bl.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.22-rc5.new/drivers/video/backlight/kb920x_bl.c 2007-07-29 05:55:39.000000000 +0200 +Index: linux-2.6.22.19/drivers/video/backlight/kb920x_bl.c +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/drivers/video/backlight/kb920x_bl.c @@ -0,0 +1,164 @@ +/* + * Backlight Driver for KB9202 @@ -9201,10 +9267,11 @@ diff -urN linux-2.6.22-rc5/drivers/video/backlight/kb920x_bl.c linux-2.6.22-rc5. +MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>"); +MODULE_DESCRIPTION("KB9202 Backlight Driver"); +MODULE_LICENSE("GPL"); -diff -urN linux-2.6.22-rc5/drivers/video/backlight/Kconfig linux-2.6.22-rc5.new/drivers/video/backlight/Kconfig ---- linux-2.6.22-rc5/drivers/video/backlight/Kconfig 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/video/backlight/Kconfig 2007-07-29 05:55:39.000000000 +0200 -@@ -71,3 +71,11 @@ +Index: linux-2.6.22.19/drivers/video/backlight/Kconfig +=================================================================== +--- linux-2.6.22.19.orig/drivers/video/backlight/Kconfig ++++ linux-2.6.22.19/drivers/video/backlight/Kconfig +@@ -71,3 +71,11 @@ config BACKLIGHT_CARILLO_RANCH help If you have a Intel LE80578 (Carillo Ranch) say Y to enable the backlight driver. @@ -9216,18 +9283,20 @@ diff -urN linux-2.6.22-rc5/drivers/video/backlight/Kconfig linux-2.6.22-rc5.new/ + help + If you have a KwikByte KB9202 board, say Y to enable the + backlight driver. -diff -urN linux-2.6.22-rc5/drivers/video/backlight/Makefile linux-2.6.22-rc5.new/drivers/video/backlight/Makefile ---- linux-2.6.22-rc5/drivers/video/backlight/Makefile 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/video/backlight/Makefile 2007-07-29 05:55:39.000000000 +0200 -@@ -7,3 +7,4 @@ +Index: linux-2.6.22.19/drivers/video/backlight/Makefile +=================================================================== +--- linux-2.6.22.19.orig/drivers/video/backlight/Makefile ++++ linux-2.6.22.19/drivers/video/backlight/Makefile +@@ -7,3 +7,4 @@ obj-$(CONFIG_BACKLIGHT_HP680) += hp680_b obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o +obj-$(CONFIG_BACKLIGHT_KB920x) += kb920x_bl.o -diff -urN linux-2.6.22-rc5/drivers/video/Kconfig linux-2.6.22-rc5.new/drivers/video/Kconfig ---- linux-2.6.22-rc5/drivers/video/Kconfig 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/video/Kconfig 2007-07-29 05:55:39.000000000 +0200 -@@ -822,6 +822,17 @@ +Index: linux-2.6.22.19/drivers/video/Kconfig +=================================================================== +--- linux-2.6.22.19.orig/drivers/video/Kconfig ++++ linux-2.6.22.19/drivers/video/Kconfig +@@ -822,6 +822,17 @@ config FB_EPSON1355 framebuffer. Product specs at <http://www.erd.epson.com/vdc/html/products.htm>. @@ -9245,7 +9314,7 @@ diff -urN linux-2.6.22-rc5/drivers/video/Kconfig linux-2.6.22-rc5.new/drivers/vi config FB_S1D13XXX tristate "Epson S1D13XXX framebuffer support" depends on FB -@@ -835,7 +846,7 @@ +@@ -835,7 +846,7 @@ config FB_S1D13XXX config FB_ATMEL tristate "AT91/AT32 LCD Controller support" @@ -9254,10 +9323,11 @@ diff -urN linux-2.6.22-rc5/drivers/video/Kconfig linux-2.6.22-rc5.new/drivers/vi select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT -diff -urN linux-2.6.22-rc5/drivers/video/Makefile linux-2.6.22-rc5.new/drivers/video/Makefile ---- linux-2.6.22-rc5/drivers/video/Makefile 2007-06-17 04:09:12.000000000 +0200 -+++ linux-2.6.22-rc5.new/drivers/video/Makefile 2007-07-29 05:55:39.000000000 +0200 -@@ -87,7 +87,8 @@ +Index: linux-2.6.22.19/drivers/video/Makefile +=================================================================== +--- linux-2.6.22.19.orig/drivers/video/Makefile ++++ linux-2.6.22.19/drivers/video/Makefile +@@ -87,7 +87,8 @@ obj-$(CONFIG_FB_G364) += g36 obj-$(CONFIG_FB_SA1100) += sa1100fb.o obj-$(CONFIG_FB_HIT) += hitfb.o obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o @@ -9267,9 +9337,10 @@ diff -urN linux-2.6.22-rc5/drivers/video/Makefile linux-2.6.22-rc5.new/drivers/v obj-$(CONFIG_FB_PVR2) += pvr2fb.o obj-$(CONFIG_FB_VOODOO1) += sstfb.o obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o -diff -urN linux-2.6.22-rc5/drivers/video/s1d15605fb.c linux-2.6.22-rc5.new/drivers/video/s1d15605fb.c ---- linux-2.6.22-rc5/drivers/video/s1d15605fb.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.22-rc5.new/drivers/video/s1d15605fb.c 2007-07-29 05:55:39.000000000 +0200 +Index: linux-2.6.22.19/drivers/video/s1d15605fb.c +=================================================================== +--- /dev/null ++++ linux-2.6.22.19/drivers/video/s1d15605fb.c @@ -0,0 +1,659 @@ +/* + * drivers/video/s1d15605.c |