diff options
Diffstat (limited to 'target/linux/ar71xx/patches-3.3/608-MIPS-ath79-ubnt-xm-add-more-boards.patch')
| -rw-r--r-- | target/linux/ar71xx/patches-3.3/608-MIPS-ath79-ubnt-xm-add-more-boards.patch | 115 |
1 files changed, 107 insertions, 8 deletions
diff --git a/target/linux/ar71xx/patches-3.3/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-3.3/608-MIPS-ath79-ubnt-xm-add-more-boards.patch index 4b880e92c5..65576b652a 100644 --- a/target/linux/ar71xx/patches-3.3/608-MIPS-ath79-ubnt-xm-add-more-boards.patch +++ b/target/linux/ar71xx/patches-3.3/608-MIPS-ath79-ubnt-xm-add-more-boards.patch @@ -1,12 +1,16 @@ --- a/arch/mips/ath79/mach-ubnt-xm.c +++ b/arch/mips/ath79/mach-ubnt-xm.c -@@ -13,15 +13,17 @@ +@@ -12,16 +12,22 @@ + #include <linux/init.h> #include <linux/pci.h> ++#include <linux/platform_device.h> #include <linux/ath9k_platform.h> +#include <linux/etherdevice.h> ++#include <linux/ar8216_platform.h> #include <asm/mach-ath79/irq.h> ++#include <asm/mach-ath79/ar71xx_regs.h> #include "dev-ap9x-pci.h" +#include "dev-eth.h" @@ -14,12 +18,13 @@ #include "dev-leds-gpio.h" #include "dev-m25p80.h" +#include "dev-usb.h" ++#include "dev-wmac.h" #include "machtypes.h" -#include "pci.h" #define UBNT_XM_GPIO_LED_L1 0 #define UBNT_XM_GPIO_LED_L2 1 -@@ -37,19 +39,19 @@ +@@ -37,19 +43,19 @@ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { { @@ -43,7 +48,7 @@ .gpio = UBNT_XM_GPIO_LED_L4, .active_low = 0, }, -@@ -66,9 +68,13 @@ static struct gpio_keys_button ubnt_xm_g +@@ -66,9 +72,13 @@ static struct gpio_keys_button ubnt_xm_g } }; @@ -57,7 +62,7 @@ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), ubnt_xm_leds_gpio); -@@ -79,9 +85,155 @@ static void __init ubnt_xm_init(void) +@@ -79,9 +89,242 @@ static void __init ubnt_xm_init(void) ath79_register_m25p80(NULL); ap91_pci_init(eeprom, NULL); @@ -158,7 +163,6 @@ + } +}; + -+ +static void __init ubnt_unifi_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); @@ -213,23 +217,117 @@ +MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20", + "Ubiquiti UniFiAP Outdoor", + ubnt_unifi_outdoor_setup); ++ ++static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = { ++ { ++ .name = "ubnt:white:dome", ++ .gpio = 12, ++ }, { ++ .name = "ubnt:blue:dome", ++ .gpio = 13, ++ } ++}; ++ ++static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = 17, ++ .active_low = 1, ++ } ++}; ++ ++static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = { ++ .mode = AR8327_PAD_MAC_RGMII, ++ .txclk_delay_en = true, ++ .rxclk_delay_en = true, ++ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, ++ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, ++}; ++ ++static struct ar8327_platform_data uap_pro_ar8327_data = { ++ .pad0_cfg = &uap_pro_ar8327_pad0_cfg, ++ .cpuport_cfg = { ++ .force_link = 1, ++ .speed = AR8327_PORT_SPEED_1000, ++ .duplex = 1, ++ .txpause = 1, ++ .rxpause = 1, ++ }, ++}; ++ ++static struct mdio_board_info uap_pro_mdio0_info[] = { ++ { ++ .bus_id = "ag71xx-mdio.0", ++ .phy_addr = 0, ++ .platform_data = &uap_pro_ar8327_data, ++ }, ++}; ++ ++#define UAP_PRO_MAC0_OFFSET 0x0000 ++#define UAP_PRO_MAC1_OFFSET 0x0006 ++#define UAP_PRO_WMAC_CALDATA_OFFSET 0x1000 ++#define UAP_PRO_PCI_CALDATA_OFFSET 0x5000 ++ ++static void __init ubnt_uap_pro_setup(void) ++{ ++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); ++ ++ ath79_register_m25p80(NULL); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds), ++ ubnt_uap_pro_gpio_leds); ++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(uap_pro_gpio_keys), ++ uap_pro_gpio_keys); ++ ++ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); ++ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); ++ ++ ath79_register_mdio(0, 0x0); ++ mdiobus_register_board_info(uap_pro_mdio0_info, ++ ARRAY_SIZE(uap_pro_mdio0_info)); ++ ++ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); ++ ath79_init_mac(ath79_eth0_data.mac_addr, ++ eeprom + UAP_PRO_MAC0_OFFSET, 0); ++ ++ /* GMAC0 is connected to an AR8327 switch */ ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ath79_eth0_data.phy_mask = BIT(0); ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; ++ ath79_eth0_pll_data.pll_1000 = 0x06000000; ++ ath79_register_eth(0); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro", ++ ubnt_uap_pro_setup); ++ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig -@@ -71,9 +71,11 @@ config ATH79_MACH_UBNT_XM - bool "Ubiquiti Networks XM (rev 1.0) board" +@@ -68,12 +68,16 @@ config ATH79_MACH_PB44 + Atheros PB44 reference board. + + config ATH79_MACH_UBNT_XM +- bool "Ubiquiti Networks XM (rev 1.0) board" ++ bool "Ubiquiti Networks XM/UniFi boards" select SOC_AR724X ++ select SOC_AR934X select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH select ATH79_DEV_GPIO_BUTTONS select ATH79_DEV_LEDS_GPIO select ATH79_DEV_M25P80 + select ATH79_DEV_USB ++ select ATH79_DEV_WMAC help Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -22,6 +22,12 @@ enum ath79_mach_type { +@@ -22,6 +22,13 @@ enum ath79_mach_type { ATH79_MACH_AP81, /* Atheros AP81 reference board */ ATH79_MACH_DB120, /* Atheros DB120 reference board */ ATH79_MACH_PB44, /* Atheros PB44 reference board */ @@ -237,6 +335,7 @@ + ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ + ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ + ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ ++ ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */ + ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */ + ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */ ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ |