diff options
Diffstat (limited to 'target/linux/adm5120')
16 files changed, 60 insertions, 60 deletions
diff --git a/target/linux/adm5120/patches-2.6.27/001-adm5120.patch b/target/linux/adm5120/patches-2.6.27/001-adm5120.patch index 0c94ca2883..5723e0a614 100644 --- a/target/linux/adm5120/patches-2.6.27/001-adm5120.patch +++ b/target/linux/adm5120/patches-2.6.27/001-adm5120.patch @@ -1,6 +1,6 @@ --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -19,6 +19,20 @@ +@@ -19,6 +19,20 @@ choice prompt "System type" default SGI_IP22 @@ -21,7 +21,7 @@ config MACH_ALCHEMY bool "Alchemy processor based machines" -@@ -598,6 +612,7 @@ +@@ -598,6 +612,7 @@ config WR_PPMC endchoice @@ -31,7 +31,7 @@ source "arch/mips/jazz/Kconfig" --- a/arch/mips/Makefile +++ b/arch/mips/Makefile -@@ -174,6 +174,21 @@ +@@ -174,6 +174,21 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/ load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 # diff --git a/target/linux/adm5120/patches-2.6.27/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.27/002-adm5120_flash.patch index 923b4fa1fe..99a87cdfb0 100644 --- a/target/linux/adm5120/patches-2.6.27/002-adm5120_flash.patch +++ b/target/linux/adm5120/patches-2.6.27/002-adm5120_flash.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig -@@ -571,5 +571,9 @@ +@@ -571,5 +571,9 @@ config MTD_PLATRAM This selection automatically selects the map_ram driver. @@ -12,7 +12,7 @@ --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile -@@ -42,6 +42,7 @@ +@@ -42,6 +42,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash. obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o obj-$(CONFIG_MTD_PCI) += pci.o obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o diff --git a/target/linux/adm5120/patches-2.6.27/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.27/003-adm5120_switch.patch index 1502a4225d..a36a3e2e9c 100644 --- a/target/linux/adm5120/patches-2.6.27/003-adm5120_switch.patch +++ b/target/linux/adm5120/patches-2.6.27/003-adm5120_switch.patch @@ -1,6 +1,6 @@ --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig -@@ -596,6 +596,10 @@ +@@ -596,6 +596,10 @@ config MIPS_AU1X00_ENET If you have an Alchemy Semi AU1X00 based system say Y. Otherwise, say N. @@ -13,7 +13,7 @@ depends on PCI && SGI_IP27 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile -@@ -187,6 +187,7 @@ +@@ -187,6 +187,7 @@ obj-$(CONFIG_SC92031) += sc92031.o # This is also a 82596 and should probably be merged obj-$(CONFIG_LP486E) += lp486e.o diff --git a/target/linux/adm5120/patches-2.6.27/005-adm5120_usb.patch b/target/linux/adm5120/patches-2.6.27/005-adm5120_usb.patch index ae85e6468d..751af5a6b7 100644 --- a/target/linux/adm5120/patches-2.6.27/005-adm5120_usb.patch +++ b/target/linux/adm5120/patches-2.6.27/005-adm5120_usb.patch @@ -13,7 +13,7 @@ depends on USB --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile -@@ -10,6 +10,7 @@ +@@ -10,6 +10,7 @@ isp1760-objs := isp1760-hcd.o isp1760-if obj-$(CONFIG_PCI) += pci-quirks.o @@ -23,7 +23,7 @@ obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile -@@ -16,6 +16,7 @@ +@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/ obj-$(CONFIG_USB_SL811_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_USB_R8A66597_HCD) += host/ diff --git a/target/linux/adm5120/patches-2.6.27/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.27/007-adm5120_pci.patch index 63f90671d7..d197cfe858 100644 --- a/target/linux/adm5120/patches-2.6.27/007-adm5120_pci.patch +++ b/target/linux/adm5120/patches-2.6.27/007-adm5120_pci.patch @@ -1,6 +1,6 @@ --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile -@@ -51,3 +51,4 @@ +@@ -51,3 +51,4 @@ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o diff --git a/target/linux/adm5120/patches-2.6.27/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.27/009-adm5120_leds_switch_trigger.patch index 79d0bcbd3b..4b8f8833dd 100644 --- a/target/linux/adm5120/patches-2.6.27/009-adm5120_leds_switch_trigger.patch +++ b/target/linux/adm5120/patches-2.6.27/009-adm5120_leds_switch_trigger.patch @@ -1,6 +1,6 @@ --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig -@@ -223,4 +223,12 @@ +@@ -223,4 +223,12 @@ config LEDS_TRIGGER_NETDEV This allows LEDs to be controlled by network device activity. If unsure, say Y. @@ -15,7 +15,7 @@ endif # NEW_LEDS --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile -@@ -32,3 +32,4 @@ +@@ -32,3 +32,4 @@ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o diff --git a/target/linux/adm5120/patches-2.6.27/100-mtd_myloder_partition_parser.patch b/target/linux/adm5120/patches-2.6.27/100-mtd_myloder_partition_parser.patch index 6d4daeeeb2..90e221958c 100644 --- a/target/linux/adm5120/patches-2.6.27/100-mtd_myloder_partition_parser.patch +++ b/target/linux/adm5120/patches-2.6.27/100-mtd_myloder_partition_parser.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig -@@ -172,6 +172,22 @@ +@@ -172,6 +172,22 @@ config MTD_AR7_PARTS ---help--- TI AR7 partitioning support @@ -25,7 +25,7 @@ config MTD_CHAR --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile -@@ -13,6 +13,7 @@ +@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli obj-$(CONFIG_MTD_AFS_PARTS) += afs.o obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o diff --git a/target/linux/adm5120/patches-2.6.27/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.27/101-cfi_fixup_macronix_bootloc.patch index 19ad785a44..d13ddaf631 100644 --- a/target/linux/adm5120/patches-2.6.27/101-cfi_fixup_macronix_bootloc.patch +++ b/target/linux/adm5120/patches-2.6.27/101-cfi_fixup_macronix_bootloc.patch @@ -20,7 +20,7 @@ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -@@ -240,6 +247,41 @@ +@@ -240,6 +247,41 @@ static void fixup_s29gl032n_sectors(stru } } @@ -62,7 +62,7 @@ static struct cfi_fixup cfi_fixup_table[] = { { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, #ifdef AMD_BOOTLOC_BUG -@@ -275,6 +317,9 @@ +@@ -275,6 +317,9 @@ static struct cfi_fixup fixup_table[] = */ { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL }, { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL }, @@ -74,7 +74,7 @@ --- a/drivers/mtd/chips/Kconfig +++ b/drivers/mtd/chips/Kconfig -@@ -196,6 +196,14 @@ +@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD provides support for one of those command sets, used on chips including the AMD Am29LV320. diff --git a/target/linux/adm5120/patches-2.6.27/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.27/102-jedec_pmc_39lvxxx_chips.patch index 9501800fe2..6c827c851a 100644 --- a/target/linux/adm5120/patches-2.6.27/102-jedec_pmc_39lvxxx_chips.patch +++ b/target/linux/adm5120/patches-2.6.27/102-jedec_pmc_39lvxxx_chips.patch @@ -11,7 +11,7 @@ #define PM49FL002 0x006D #define PM49FL004 0x006E #define PM49FL008 0x006A -@@ -1248,6 +1252,54 @@ +@@ -1248,6 +1252,54 @@ static const struct amd_flash_info jedec ERASEINFO(0x02000,2), ERASEINFO(0x04000,1), } diff --git a/target/linux/adm5120/patches-2.6.27/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.27/103-mtd_trxsplit.patch index 4ebf10ca23..d3b0858040 100644 --- a/target/linux/adm5120/patches-2.6.27/103-mtd_trxsplit.patch +++ b/target/linux/adm5120/patches-2.6.27/103-mtd_trxsplit.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig -@@ -55,6 +55,11 @@ +@@ -55,6 +55,11 @@ config MTD_ROOTFS_SPLIT depends on MTD_PARTITIONS default y @@ -14,7 +14,7 @@ depends on MTD_PARTITIONS --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile -@@ -8,6 +8,7 @@ +@@ -8,6 +8,7 @@ mtd-y := mtdcore.o mtdsuper.o mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o diff --git a/target/linux/adm5120/patches-2.6.27/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.27/120-rb153_cf_driver.patch index b30c5def6b..e38a4d22aa 100644 --- a/target/linux/adm5120/patches-2.6.27/120-rb153_cf_driver.patch +++ b/target/linux/adm5120/patches-2.6.27/120-rb153_cf_driver.patch @@ -1,6 +1,6 @@ --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile -@@ -72,6 +72,7 @@ +@@ -72,6 +72,7 @@ obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o @@ -10,7 +10,7 @@ # Should be last but one libata driver --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig -@@ -568,6 +568,15 @@ +@@ -568,6 +568,15 @@ config PATA_RADISYS If unsure, say N. diff --git a/target/linux/adm5120/patches-2.6.27/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.27/200-amba_pl010_hacks.patch index 0352b86eae..03a67627bd 100644 --- a/target/linux/adm5120/patches-2.6.27/200-amba_pl010_hacks.patch +++ b/target/linux/adm5120/patches-2.6.27/200-amba_pl010_hacks.patch @@ -14,7 +14,7 @@ #define AMBA_ISR_PASS_LIMIT 256 -@@ -80,9 +79,9 @@ +@@ -80,9 +79,9 @@ static void pl010_stop_tx(struct uart_po struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; @@ -26,7 +26,7 @@ } static void pl010_start_tx(struct uart_port *port) -@@ -90,9 +89,9 @@ +@@ -90,9 +89,9 @@ static void pl010_start_tx(struct uart_p struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; @@ -38,7 +38,7 @@ } static void pl010_stop_rx(struct uart_port *port) -@@ -100,9 +99,9 @@ +@@ -100,9 +99,9 @@ static void pl010_stop_rx(struct uart_po struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; @@ -50,7 +50,7 @@ } static void pl010_enable_ms(struct uart_port *port) -@@ -110,9 +109,9 @@ +@@ -110,9 +109,9 @@ static void pl010_enable_ms(struct uart_ struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; @@ -62,7 +62,7 @@ } static void pl010_rx_chars(struct uart_amba_port *uap) -@@ -120,9 +119,9 @@ +@@ -120,9 +119,9 @@ static void pl010_rx_chars(struct uart_a struct tty_struct *tty = uap->port.info->port.tty; unsigned int status, ch, flag, rsr, max_count = 256; @@ -74,7 +74,7 @@ flag = TTY_NORMAL; uap->port.icount.rx++; -@@ -131,9 +130,9 @@ +@@ -131,9 +130,9 @@ static void pl010_rx_chars(struct uart_a * Note that the error handling code is * out of the main execution path */ @@ -86,7 +86,7 @@ if (rsr & UART01x_RSR_BE) { rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); -@@ -163,7 +162,7 @@ +@@ -163,7 +162,7 @@ static void pl010_rx_chars(struct uart_a uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); ignore_char: @@ -95,7 +95,7 @@ } spin_unlock(&uap->port.lock); tty_flip_buffer_push(tty); -@@ -176,7 +175,7 @@ +@@ -176,7 +175,7 @@ static void pl010_tx_chars(struct uart_a int count; if (uap->port.x_char) { @@ -104,7 +104,7 @@ uap->port.icount.tx++; uap->port.x_char = 0; return; -@@ -188,7 +187,7 @@ +@@ -188,7 +187,7 @@ static void pl010_tx_chars(struct uart_a count = uap->port.fifosize >> 1; do { @@ -113,7 +113,7 @@ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); uap->port.icount.tx++; if (uart_circ_empty(xmit)) -@@ -206,9 +205,9 @@ +@@ -206,9 +205,9 @@ static void pl010_modem_status(struct ua { unsigned int status, delta; @@ -125,7 +125,7 @@ delta = status ^ uap->old_status; uap->old_status = status; -@@ -236,7 +235,7 @@ +@@ -236,7 +235,7 @@ static irqreturn_t pl010_int(int irq, vo spin_lock(&uap->port.lock); @@ -134,7 +134,7 @@ if (status) { do { if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) -@@ -249,7 +248,7 @@ +@@ -249,7 +248,7 @@ static irqreturn_t pl010_int(int irq, vo if (pass_counter-- == 0) break; @@ -143,7 +143,7 @@ } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | UART010_IIR_TIS)); handled = 1; -@@ -263,7 +262,7 @@ +@@ -263,7 +262,7 @@ static irqreturn_t pl010_int(int irq, vo static unsigned int pl010_tx_empty(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; @@ -152,7 +152,7 @@ return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; } -@@ -273,7 +272,7 @@ +@@ -273,7 +272,7 @@ static unsigned int pl010_get_mctrl(stru unsigned int result = 0; unsigned int status; @@ -161,7 +161,7 @@ if (status & UART01x_FR_DCD) result |= TIOCM_CAR; if (status & UART01x_FR_DSR) -@@ -299,12 +298,12 @@ +@@ -299,12 +298,12 @@ static void pl010_break_ctl(struct uart_ unsigned int lcr_h; spin_lock_irqsave(&uap->port.lock, flags); @@ -176,7 +176,7 @@ spin_unlock_irqrestore(&uap->port.lock, flags); } -@@ -332,12 +331,12 @@ +@@ -332,12 +331,12 @@ static int pl010_startup(struct uart_por /* * initialise the old status of the modem signals */ @@ -191,7 +191,7 @@ uap->port.membase + UART010_CR); return 0; -@@ -360,10 +359,10 @@ +@@ -360,10 +359,10 @@ static void pl010_shutdown(struct uart_p /* * disable all interrupts, disable the port */ @@ -204,7 +204,7 @@ ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), uap->port.membase + UART010_LCRH); -@@ -385,7 +384,7 @@ +@@ -385,7 +384,7 @@ pl010_set_termios(struct uart_port *port /* * Ask the core to calculate the divisor for us. */ @@ -213,7 +213,7 @@ quot = uart_get_divisor(port, baud); switch (termios->c_cflag & CSIZE) { -@@ -448,25 +447,25 @@ +@@ -448,25 +447,25 @@ pl010_set_termios(struct uart_port *port uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; /* first, disable everything */ @@ -245,7 +245,7 @@ spin_unlock_irqrestore(&uap->port.lock, flags); } -@@ -538,7 +537,7 @@ +@@ -538,7 +537,7 @@ static struct uart_ops amba_pl010_pops = .verify_port = pl010_verify_port, }; @@ -254,7 +254,7 @@ #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE -@@ -548,10 +547,10 @@ +@@ -548,10 +547,10 @@ static void pl010_console_putchar(struct unsigned int status; do { @@ -267,7 +267,7 @@ } static void -@@ -565,8 +564,8 @@ +@@ -565,8 +564,8 @@ pl010_console_write(struct console *co, /* * First save the CR then disable the interrupts */ @@ -278,7 +278,7 @@ uart_console_write(&uap->port, s, count, pl010_console_putchar); -@@ -575,10 +574,10 @@ +@@ -575,10 +574,10 @@ pl010_console_write(struct console *co, * and restore the TCR */ do { @@ -291,7 +291,7 @@ clk_disable(uap->clk); } -@@ -587,9 +586,9 @@ +@@ -587,9 +586,9 @@ static void __init pl010_console_get_options(struct uart_amba_port *uap, int *baud, int *parity, int *bits) { @@ -303,7 +303,7 @@ *parity = 'n'; if (lcr_h & UART01x_LCRH_PEN) { -@@ -604,8 +603,8 @@ +@@ -604,8 +603,8 @@ pl010_console_get_options(struct uart_am else *bits = 8; @@ -314,7 +314,7 @@ *baud = uap->port.uartclk / (16 * (quot + 1)); } } -@@ -623,7 +622,7 @@ +@@ -623,7 +622,7 @@ static int __init pl010_console_setup(st * if so, search for the first available port that does have * console support. */ @@ -323,7 +323,7 @@ co->index = 0; uap = amba_ports[co->index]; if (!uap) -@@ -641,7 +640,7 @@ +@@ -641,7 +640,7 @@ static int __init pl010_console_setup(st static struct uart_driver amba_reg; static struct console amba_console = { @@ -332,7 +332,7 @@ .write = pl010_console_write, .device = uart_console_device, .setup = pl010_console_setup, -@@ -657,11 +656,11 @@ +@@ -657,11 +656,11 @@ static struct console amba_console = { static struct uart_driver amba_reg = { .owner = THIS_MODULE, @@ -349,7 +349,7 @@ --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig -@@ -285,10 +285,25 @@ +@@ -285,10 +285,25 @@ config SERIAL_AMBA_PL010 help This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have an Integrator/AP or Integrator/PP2 platform, or if you have a diff --git a/target/linux/adm5120/patches-2.6.27/202-pci_disable_common_quirks.patch b/target/linux/adm5120/patches-2.6.27/202-pci_disable_common_quirks.patch index 469f040f95..1b0f8fcba1 100644 --- a/target/linux/adm5120/patches-2.6.27/202-pci_disable_common_quirks.patch +++ b/target/linux/adm5120/patches-2.6.27/202-pci_disable_common_quirks.patch @@ -1,6 +1,6 @@ --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig -@@ -42,6 +42,12 @@ +@@ -42,6 +42,12 @@ config PCI_DEBUG When in doubt, say N. @@ -23,7 +23,7 @@ /* The Mellanox Tavor device gives false positive parity errors * Mark this device with a broken_parity_status, to allow * PCI scanning code to "skip" this now blacklisted device. -@@ -1554,6 +1555,7 @@ +@@ -1554,6 +1555,7 @@ static void __devinit fixup_rev1_53c810( } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); @@ -31,7 +31,7 @@ static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { -@@ -1634,6 +1636,7 @@ +@@ -1634,6 +1636,7 @@ void pci_fixup_device(enum pci_fixup_pas } EXPORT_SYMBOL(pci_fixup_device); @@ -39,7 +39,7 @@ /* Enable 1k I/O space granularity on the Intel P64H2 */ static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev) { -@@ -2007,3 +2010,4 @@ +@@ -2007,3 +2010,4 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT quirk_msi_intx_disable_bug); #endif /* CONFIG_PCI_MSI */ diff --git a/target/linux/adm5120/patches-2.6.27/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.27/203-gpio_leds_brightness.patch index 5a3c11aabe..bb94fd05ea 100644 --- a/target/linux/adm5120/patches-2.6.27/203-gpio_leds_brightness.patch +++ b/target/linux/adm5120/patches-2.6.27/203-gpio_leds_brightness.patch @@ -1,6 +1,6 @@ --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c -@@ -43,13 +43,17 @@ +@@ -43,13 +43,17 @@ static void gpio_led_set(struct led_clas container_of(led_cdev, struct gpio_led_data, cdev); int level; diff --git a/target/linux/adm5120/patches-2.6.27/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.27/310-adm5120_wdt.patch index 8c93912e0a..b71b99159a 100644 --- a/target/linux/adm5120/patches-2.6.27/310-adm5120_wdt.patch +++ b/target/linux/adm5120/patches-2.6.27/310-adm5120_wdt.patch @@ -1,6 +1,6 @@ --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig -@@ -653,6 +653,18 @@ +@@ -653,6 +653,18 @@ config RC32434_WDT To compile this driver as a module, choose M here: the module will be called rc32434_wdt. @@ -21,7 +21,7 @@ depends on SGI_HAS_INDYDOG --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile -@@ -102,6 +102,7 @@ +@@ -102,6 +102,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o obj-$(CONFIG_AR7_WDT) += ar7_wdt.o obj-$(CONFIG_TXX9_WDT) += txx9wdt.o diff --git a/target/linux/adm5120/patches-2.6.27/800-usb_automatically_enable_rhsc_interrupt.patch b/target/linux/adm5120/patches-2.6.27/800-usb_automatically_enable_rhsc_interrupt.patch index 5e99fffc51..dc0f843c86 100644 --- a/target/linux/adm5120/patches-2.6.27/800-usb_automatically_enable_rhsc_interrupt.patch +++ b/target/linux/adm5120/patches-2.6.27/800-usb_automatically_enable_rhsc_interrupt.patch @@ -1,6 +1,6 @@ --- a/drivers/usb/host/adm5120-drv.c +++ b/drivers/usb/host/adm5120-drv.c -@@ -174,7 +174,6 @@ +@@ -174,7 +174,6 @@ static const struct hc_driver adm5120_hc */ .hub_status_data = admhc_hub_status_data, .hub_control = admhc_hub_control, @@ -33,7 +33,7 @@ static int --- a/drivers/usb/host/adm5120-pm.c +++ b/drivers/usb/host/adm5120-pm.c -@@ -432,13 +432,17 @@ +@@ -432,13 +432,17 @@ static inline int admhc_rh_resume(struct static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed, int any_connected) { |