diff options
Diffstat (limited to 'target/linux/adm5120')
9 files changed, 46 insertions, 46 deletions
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c b/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c index 0abb961fd1..3e511064b3 100644 --- a/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c +++ b/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c @@ -52,21 +52,21 @@ void adm5120_ndelay(u32 ns) { u32 t; - SW_WRITE_REG(TIMER, TIMER_PERIOD_DEFAULT); - SW_WRITE_REG(TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM)); + SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT); + SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM)); t = (ns+640) / 640; t &= TIMER_PERIOD_MASK; - SW_WRITE_REG(TIMER, t | TIMER_TE); + SW_WRITE_REG(SWITCH_REG_TIMER, t | TIMER_TE); /* wait until the timer expires */ do { - t = SW_READ_REG(TIMER_INT); + t = SW_READ_REG(SWITCH_REG_TIMER_INT); } while ((t & TIMER_INT_TOS) == 0); /* leave the timer disabled */ - SW_WRITE_REG(TIMER, TIMER_PERIOD_DEFAULT); - SW_WRITE_REG(TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM)); + SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT); + SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM)); } void __init adm5120_soc_init(void) @@ -74,7 +74,7 @@ void __init adm5120_soc_init(void) u32 code; u32 clks; - code = SW_READ_REG(CODE); + code = SW_READ_REG(SWITCH_REG_CODE); adm5120_product_code = CODE_GET_PC(code); adm5120_revision = CODE_GET_REV(code); diff --git a/target/linux/adm5120/files/arch/mips/adm5120/gpio.c b/target/linux/adm5120/files/arch/mips/adm5120/gpio.c index 01d5a87c4e..a7ae5497de 100644 --- a/target/linux/adm5120/files/arch/mips/adm5120/gpio.c +++ b/target/linux/adm5120/files/arch/mips/adm5120/gpio.c @@ -343,7 +343,7 @@ EXPORT_SYMBOL(adm5120_irq_to_gpio); void __init adm5120_gpio_csx0_enable(void) { gpio_conf2 |= GPIO_CONF2_CSX0; - SW_WRITE_REG(GPIO_CONF2, gpio_conf2); + SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2); adm5120_gpio_map[ADM5120_GPIO_PIN1].flags &= ~GPIO_FLAG_VALID; adm5120_gpio_map[ADM5120_GPIO_PIN2].irq = ADM5120_IRQ_GPIO2; @@ -352,7 +352,7 @@ void __init adm5120_gpio_csx0_enable(void) void __init adm5120_gpio_csx1_enable(void) { gpio_conf2 |= GPIO_CONF2_CSX1; - SW_WRITE_REG(GPIO_CONF2, gpio_conf2); + SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2); adm5120_gpio_map[ADM5120_GPIO_PIN3].flags &= ~GPIO_FLAG_VALID; if (adm5120_package_bga()) @@ -362,7 +362,7 @@ void __init adm5120_gpio_csx1_enable(void) void __init adm5120_gpio_ew_enable(void) { gpio_conf2 |= GPIO_CONF2_EW; - SW_WRITE_REG(GPIO_CONF2, gpio_conf2); + SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2); adm5120_gpio_map[ADM5120_GPIO_PIN0].flags &= ~GPIO_FLAG_VALID; } @@ -372,7 +372,7 @@ void __init adm5120_gpio_init(void) int i; gpio_conf2 = 0; - SW_WRITE_REG(GPIO_CONF2, gpio_conf2); + SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2); for (i = 0; i < ADM5120_GPIO_COUNT; i++) adm5120_gpio_map[i].flags = GPIO_FLAG_VALID; diff --git a/target/linux/adm5120/files/arch/mips/adm5120/memory.c b/target/linux/adm5120/files/arch/mips/adm5120/memory.c index 79e9cb417a..1803f2bfc5 100644 --- a/target/linux/adm5120/files/arch/mips/adm5120/memory.c +++ b/target/linux/adm5120/files/arch/mips/adm5120/memory.c @@ -82,7 +82,7 @@ static void __init adm5120_detect_memsize(void) u32 size, maxsize; u8 *p; - memctrl = SW_READ_REG(MEMCTRL); + memctrl = SW_READ_REG(SWITCH_REG_MEMCTRL); switch (memctrl & MEMCTRL_SDRS_MASK) { case MEMCTRL_SDRS_4M: maxsize = 4 << 20; @@ -148,7 +148,7 @@ static void __init adm5120_detect_memsize(void) memctrl |= MEMCTRL_SDRS_64M; break; } - SW_WRITE_REG(MEMCTRL, memctrl); + SW_WRITE_REG(SWITCH_REG_MEMCTRL, memctrl); } out: diff --git a/target/linux/adm5120/files/arch/mips/adm5120/reset.c b/target/linux/adm5120/files/arch/mips/adm5120/reset.c index aa278fd2aa..bcdce5a109 100644 --- a/target/linux/adm5120/files/arch/mips/adm5120/reset.c +++ b/target/linux/adm5120/files/arch/mips/adm5120/reset.c @@ -48,7 +48,7 @@ void adm5120_restart(char *command) if (adm5120_board_reset) adm5120_board_reset(); - SW_WRITE_REG(SOFT_RESET, 1); + SW_WRITE_REG(SWITCH_REG_SOFT_RESET, 1); } void adm5120_halt(void) diff --git a/target/linux/adm5120/files/drivers/char/watchdog/adm5120_wdt.c b/target/linux/adm5120/files/drivers/char/watchdog/adm5120_wdt.c index 982fe39c49..2439fbc7f2 100644 --- a/target/linux/adm5120/files/drivers/char/watchdog/adm5120_wdt.c +++ b/target/linux/adm5120/files/drivers/char/watchdog/adm5120_wdt.c @@ -1,5 +1,5 @@ /* - * ADM5120_WDT 0.01: Infineon ADM5120 SoC watchdog driver + * ADM5120_WDT 0.01: Infineon ADM5120 SoC watchdog driver * Copyright (c) Ondrej Zajicek <santiago@crfreenet.org>, 2007 * * based on @@ -47,26 +47,26 @@ MODULE_LICENSE("GPL"); static inline void wdt_set_timeout(void) { u32 val = (1 << 31) | (((timeout * 100) & 0x7FFF) << 16); - SW_WRITE_REG(WDOG0, val); + SW_WRITE_REG(SWITCH_REG_WDOG0, val); } -/* +/* It looks like WDOG0-register-write don't modify counter, but WDOG0-register-read resets counter. */ static inline void wdt_reset_counter(void) { - SW_READ_REG(WDOG0); + SW_READ_REG(SWITCH_REG_WDOG0); } static inline void wdt_disable(void) { - SW_WRITE_REG(WDOG0, 0x7FFF0000); + SW_WRITE_REG(SWITCH_REG_WDOG0, 0x7FFF0000); } - + static int wdt_open(struct inode *inode, struct file *file) { /* Allow only one person to hold it open */ diff --git a/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c b/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c index 824d2f5e8e..b84492f46b 100644 --- a/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c +++ b/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c @@ -261,7 +261,7 @@ static int adm5120_flash_initinfo(struct adm5120_flash_info *info, if (info->amap.window_size == 0) { /* get memory window size */ - t = SW_READ_REG(MEMCTRL) >> fdesc->srs_shift; + t = SW_READ_REG(SWITCH_REG_MEMCTRL) >> fdesc->srs_shift; t &= MEMCTRL_SRS_MASK; info->amap.window_size = flash_sizes[t]; } diff --git a/target/linux/adm5120/files/drivers/net/adm5120sw.c b/target/linux/adm5120/files/drivers/net/adm5120sw.c index f876844060..c8c3f1d5b2 100644 --- a/target/linux/adm5120/files/drivers/net/adm5120sw.c +++ b/target/linux/adm5120/files/drivers/net/adm5120sw.c @@ -280,56 +280,56 @@ static void sw_dump_regs(void) { u32 t; - t = SW_READ_REG(PHY_STATUS); + t = sw_read_reg(SWITCH_REG_PHY_STATUS); SW_DBG("phy_status: %08X\n", t); - t = SW_READ_REG(CPUP_CONF); + t = sw_read_reg(SWITCH_REG_CPUP_CONF); SW_DBG("cpup_conf: %08X%s%s%s\n", t, (t & CPUP_CONF_DCPUP) ? " DCPUP" : "", (t & CPUP_CONF_CRCP) ? " CRCP" : "", (t & CPUP_CONF_BTM) ? " BTM" : ""); - t = SW_READ_REG(PORT_CONF0); + t = sw_read_reg(SWITCH_REG_PORT_CONF0); SW_DBG("port_conf0: %08X\n", t); - t = SW_READ_REG(PORT_CONF1); + t = sw_read_reg(SWITCH_REG_PORT_CONF1); SW_DBG("port_conf1: %08X\n", t); - t = SW_READ_REG(PORT_CONF2); + t = sw_read_reg(SWITCH_REG_PORT_CONF2); SW_DBG("port_conf2: %08X\n", t); - t = SW_READ_REG(VLAN_G1); + t = sw_read_reg(SWITCH_REG_VLAN_G1); SW_DBG("vlan g1: %08X\n", t); - t = SW_READ_REG(VLAN_G2); + t = sw_read_reg(SWITCH_REG_VLAN_G2); SW_DBG("vlan g2: %08X\n", t); - t = SW_READ_REG(BW_CNTL0); + t = sw_read_reg(SWITCH_REG_BW_CNTL0); SW_DBG("bw_cntl0: %08X\n", t); - t = SW_READ_REG(BW_CNTL1); + t = sw_read_reg(SWITCH_REG_BW_CNTL1); SW_DBG("bw_cntl1: %08X\n", t); - t = SW_READ_REG(PHY_CNTL0); + t = sw_read_reg(SWITCH_REG_PHY_CNTL0); SW_DBG("phy_cntl0: %08X\n", t); - t = SW_READ_REG(PHY_CNTL1); + t = sw_read_reg(SWITCH_REG_PHY_CNTL1); SW_DBG("phy_cntl1: %08X\n", t); - t = SW_READ_REG(PHY_CNTL2); + t = sw_read_reg(SWITCH_REG_PHY_CNTL2); SW_DBG("phy_cntl2: %08X\n", t); - t = SW_READ_REG(PHY_CNTL3); + t = sw_read_reg(SWITCH_REG_PHY_CNTL3); SW_DBG("phy_cntl3: %08X\n", t); - t = SW_READ_REG(PHY_CNTL4); + t = sw_read_reg(SWITCH_REG_PHY_CNTL4); SW_DBG("phy_cntl4: %08X\n", t); - t = SW_READ_REG(INT_STATUS); + t = sw_read_reg(SWITCH_REG_INT_STATUS); sw_dump_intr_mask("int_status: ", t); - t = SW_READ_REG(INT_MASK); + t = sw_read_reg(SWITCH_REG_INT_MASK); sw_dump_intr_mask("int_mask: ", t); - t = SW_READ_REG(SHDA); + t = sw_read_reg(SWITCH_REG_SHDA); SW_DBG("shda: %08X\n", t); - t = SW_READ_REG(SLDA); + t = sw_read_reg(SWITCH_REG_SLDA); SW_DBG("slda: %08X\n", t); - t = SW_READ_REG(RHDA); + t = sw_read_reg(SWITCH_REG_RHDA); SW_DBG("rhda: %08X\n", t); - t = SW_READ_REG(RLDA); + t = sw_read_reg(SWITCH_REG_RLDA); SW_DBG("rlda: %08X\n", t); } @@ -1061,7 +1061,7 @@ static int __init adm5120_switch_probe(struct platform_device *pdev) (SWITCH_PORTS_PHY << PHY_CNTL2_PHYR_SHIFT) | (SWITCH_PORTS_PHY << PHY_CNTL2_AMDIX_SHIFT) | PHY_CNTL2_RMAE; - SW_WRITE_REG(PHY_CNTL2, t); + sw_write_reg(SWITCH_REG_PHY_CNTL2, t); t = sw_read_reg(SWITCH_REG_PHY_CNTL3); t |= PHY_CNTL3_RNT; diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h index 8d86fc6e78..a321db5d4a 100644 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h @@ -65,8 +65,8 @@ static inline void adm5120_nand_enable(void) { - SW_WRITE_REG(BW_CNTL1, BW_CNTL1_NAND_ENABLE); - SW_WRITE_REG(BOOT_DONE, 1); + SW_WRITE_REG(SWITCH_REG_BW_CNTL1, BW_CNTL1_NAND_ENABLE); + SW_WRITE_REG(SWITCH_REG_BOOT_DONE, 1); } static inline void adm5120_nand_set_wpn(unsigned int set) diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h index f96c7d50c7..9ed5233cb5 100644 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h @@ -32,9 +32,9 @@ #define BITMASK(len) ((1 << (len))-1) #define SW_READ_REG(r) __raw_readl( \ - (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + SWITCH_REG_ ## r) + (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r) #define SW_WRITE_REG(r, v) __raw_writel((v), \ - (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + SWITCH_REG_ ## r) + (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r) /* Switch register offsets */ #define SWITCH_REG_CODE 0x0000 |